--- /dev/null
+#!/bin/bash
+REVISION=$(echo '$Revision$' | sed -e 's,\$,,g' -e 's,^\w*:\s,,' )
+
+COMMANDPATH=$0
+COMMAND=$(basename $0)
+
+# default values, tunable with command-line options
+DEFAULT_FCDISTRO=f7
+DEFAULT_PLDISTRO=planetlab
+DEFAULT_PERSONALITY=linux32
+DEFAULT_BASE="@DATE@--test-@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
+DEFAULT_SVNPATH="http://svn.planet-lab.org/svn/build/trunk"
+DEFAULT_WEBPATH="/build/@PLDISTRO@/"
+
+DEFAULT_BUILDREPO="http://build.planet-lab.org/install-rpms/archive/"
+DEFAULT_REPOURL="@BUILDREPO@/@PLDISTRO@/@FCDISTRO@/@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@/RPMS"
+
+# 10.1 subnet allocated for testing at Princeton
+DEFAULT_IPPREFIX16="10.1"
+
+# default to eth0
+DEFAULT_TESTVSERVER_DEV=0
+
+# for the test part
+TESTSVNPATH="http://svn.planet-lab.org/svn/tests/trunk/system/"
+
+####################
+# assuming vserver runs in UTC
+DATE=$(date +'%Y.%m.%d')
+
+# Notify recipient of failure or success, manage various stamps
+function failure() {
+ set -x
+ WEBLOG=${WEBPATH}/${BASE}.test-log.txt
+ cp $LOG ${WEBLOG}
+ (echo -n "============================== $COMMAND: failure at " ; date ; tail -c 20k $WEBLOG) > ${WEBLOG}.ko
+ if [ -n "$MAILTO" ] ; then
+ tail -c 20k ${WEBLOG} | mail -s "Failures for test ${BASE}" $MAILTO
+ fi
+ exit 1
+}
+
+function success () {
+ set -x
+ WEBLOG=${WEBPATH}/${BASE}.test-log.txt
+ cp $LOG ${WEBLOG}
+ touch ${WEBLOG}.ok
+ if [ -n "$MAILTO" ] ; then
+ (echo "$PLDISTRO ($BASE) tests for $FCDISTRO completed on $(date)" ) | mail -s "Successful test for ${BASE}" $MAILTO
+ fi
+ exit 0
+}
+
+function show_env () {
+ set +x
+ echo FCDISTRO=$FCDISTRO
+ echo PLDISTRO=$PLDISTRO
+ echo BASE=$BASE
+ echo SVNPATH=$SVNPATH
+ echo MAKEVARS="${MAKEVARS[@]}"
+ echo MAKEOPTS="${MAKEOPTS[@]}"
+ echo PLDISTROTAGS="$PLDISTROTAGS"
+ echo TAGSRELEASE="$TAGSRELEASE"
+ echo -n "(might be unexpanded)"
+ echo WEBPATH="$WEBPATH"
+ if [ -d /vservers ] ; then
+ echo PLDISTROTAGS="$PLDISTROTAGS"
+ else
+ echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
+ cat /build/$PLDISTROTAGS
+ echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
+ fi
+ set -x
+}
+
+function usage () {
+ ### set BASE from DISTRO, if unspecified
+ echo "Usage: $COMMAND [option] make-targets"
+ echo "This is $REVISION"
+ echo "Supported options"
+ echo " -n dry-run : -n passed to make - vserver gets created though - no mail sent"
+ echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
+ echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
+ echo " -b base - defaults to $DEFAULT_BASE"
+ echo " @NAME@ replaced as appropriate, which currently defaults to $BASE"
+ echo " -p personality - defaults to $DEFAULT_PERSONALITY"
+ echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
+ echo " -r tagsrelease - a release number that refers to PLDISTROTAGS - defaults to HEAD"
+ echo " -s svnpath - where to fetch the build module"
+ echo " -o : overwrite - re-run in base directory, do not create vserver"
+ echo " -m mailto"
+ echo " -a makevar=value - space in values are not supported"
+ echo " -u repourl -- defaults to $DEFAULT_REPOURL"
+ echo " @NAME@ replaced as appropriate, which currently defaults to $REPOURL"
+ echo " -w webpath - defaults to $DEFAULT_WEBPATH"
+ echo " @NAME@ replaced as appropriate, which currently defaults to $WEBPATH"
+ echo " -j ip address ; use this to give the vserver an explicit IP address; also see -i."
+ echo " -i /16 ip subnet for auto IP address selection within the subnet -- defaults to $DEFAULT_IPPREFIX16"
+ echo " This is only used when no explicit IP address is specified."
+ echo " -v : be verbose"
+ echo " -7 : uses weekday-@FCDISTRO@ as base -- defaults to $(date +%a|tr A-Z a-z)-$FCDISTRO"
+ exit 1
+}
+
+function main () {
+
+ set -e
+
+ # preserve arguments for passing them again later
+ declare -a argv
+ for arg in "$@"; do argv=(${argv[@]} "$arg") ; done
+
+ # set defaults
+ [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
+ [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
+ [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
+ [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
+ [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
+ [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
+ [ -z "$SVNPATH" ] && SVNPATH="$DEFAULT_SVNPATH"
+ [ -z "$BUILDREPO" ] && BUILDREPO="$DEFAULT_BUILDREPO"
+ [ -z "$REPOURL" ] && REPOURL="$DEFAULT_REPOURL"
+ [ -z "$IPPREFIX16" ] && IPPREFIX16="$DEFAULT_IPPREFIX16"
+ [ -z "$TESTVSERVER_DEV" ] && TESTVSERVER_DEV="$DEFAULT_TESTVSERVER_DEV"
+
+ # parse arguments
+ MAKEVARS=()
+ MAKEOPTS=()
+ while getopts "nf:d:b:p:t:r:s:om:a:u:w:i:j:vh7" opt ; do
+ case $opt in
+ n) DRY_RUN="true" ; MAKEOPTS=(${MAKEOPTS[@]} -n) ; MAILTO="";;
+ f) FCDISTRO=$OPTARG ;;
+ d) PLDISTRO=$OPTARG ;;
+ b) BASE=$OPTARG ;;
+ p) PERSONALITY=$OPTARG ;;
+ t) PLDISTROTAGS=$OPTARG ;;
+ r) TAGSRELEASE=$OPTARG ;;
+ s) SVNPATH=$OPTARG ;;
+ o) OVERWRITEMODE=true ;;
+ m) MAILTO=$OPTARG ;;
+ a) MAKEVARS=(${MAKEVARS[@]} "$OPTARG") ;;
+ u) REPOURL=$OPTARG ;;
+ w) WEBPATH=$OPTARG ;;
+ i) IPPREFIX16=$OPTARG ;;
+ j) TESTVSERVER_IP=$OPTARG ;;
+ v) set -x ;;
+ 7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ;;
+ h|*) usage ;;
+ esac
+ done
+
+ shift $(($OPTIND - 1))
+ MAKETARGETS="$@"
+
+ ### set BASE from DISTRO, if unspecified
+ sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
+ BASE=$(echo ${BASE} | sed $sedargs)
+ WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
+ REPOURL=$(echo ${REPOURL} | sed $sedargs)
+ sedargs="-e s,@BUILDREPO@,${BUILDREPO},g"
+ REPOURL=$(echo ${REPOURL} | sed $sedargs)
+
+ trap failure ERR INT
+ # create vserver: check it does not exist yet
+ i=
+ while [ -d /vservers/${BASE}${i} ] ; do
+ # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
+ [ -z ${i} ] && BASE=${BASE}-n
+ i=$((${i}+1))
+ if [ $i -gt 100 ] ; then
+ echo "$COMMAND: Failed to create build vserver /vservers/${BASE}${i}"
+ exit 1
+ fi
+ done
+ BASE=${BASE}${i}
+ # need update
+ # manage LOG - beware it might be a symlink so nuke it first
+ LOG=/vservers/${BASE}.log.txt
+ rm -f $LOG
+ exec > $LOG 2>&1
+ set -x
+ echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
+ show_env
+
+ ### extract the whole build - much simpler
+ tmpdir=/tmp/$COMMAND-$$
+ svn export $SVNPATH $tmpdir
+ # Create vserver
+ cd $tmpdir
+ ./vtest-init-vserver.sh -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} ${BASE} ${REPOURL}
+ # cleanup
+ cd -
+ rm -rf $tmpdir
+
+ vserver ${BASE} stop
+ rm -f /etc/vservers/${BASE}/interfaces/0/*
+ if [ -z "$TESTVSERVER_IP" ] ; then
+ xid=$(cat /etc/vservers/${BASE}/context)
+ TESTVSERVER_IP=$(python -c "context=int($xid); print '%s.%d.%d' % ($IPPREFIX16,(context&0xff00)>>8,context&0xff)")
+ fi
+ mkdir -p /etc/vservers/${BASE}/interfaces/0
+ echo "${TESTVSERVER_IP}" > /etc/vservers/${BASE}/interfaces/0/ip
+ echo "eth${TESTVSERVER_DEV}" > /etc/vservers/${BASE}/interfaces/0/dev
+ vserver ${BASE} start
+ echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
+
+ # The log inside the vserver contains everything
+ LOG2=/vservers/${BASE}/log.txt
+ (echo "==================== BEG VSERVER Transcript of vserver creation" ; \
+ cat $LOG ; \
+ echo "==================== END VSERVER Transcript of vserver creation" ; \
+ echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
+ ### not too nice : nuke the former log, symlink it to the new one
+ rm $LOG; ln -s $LOG2 $LOG
+ LOG=$LOG2
+ # redirect log again
+ exec >> $LOG 2>&1
+
+ svn cat ${TESTSVNPATH}/selftest > /vservers/${BASE}/selftest
+ vserver ${BASE} exec chmod +x /selftest
+ vserver ${BASE} exec /selftest ${BASE}.$(hostname) ${TESTVSERVER_IP}
+ success
+}
+
+##########
+main "$@"
git://git.onelab.eu / tests.git / commitdiff