From: Thierry Parmentelat <thierry.parmentelat@inria.fr>
Date: Sat, 11 Jan 2014 00:25:32 +0000 (+0100)
Subject: trash oldy
X-Git-Tag: before_libvirt_121~81
X-Git-Url: http://git.onelab.eu/?p=build.git;a=commitdiff_plain;h=e4688af0db32d978329d839b664921e4041d97b3

trash oldy
---

diff --git a/vtest-nightly.sh b/vtest-nightly.sh
deleted file mode 100644
index 36b607aa..00000000
--- a/vtest-nightly.sh
+++ /dev/null
@@ -1,226 +0,0 @@
-#!/bin/bash
-REVISION=$(echo '$Revision$' | sed -e 's,\$,,g' -e 's,^\w*:\s,,' )
-
-COMMANDPATH=$0
-COMMAND=$(basename $0)
-
-# default values, tunable with command-line options
-DEFAULT_FCDISTRO=f7
-DEFAULT_PLDISTRO=planetlab
-DEFAULT_PERSONALITY=linux32
-DEFAULT_BASE="@DATE@--test-@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
-DEFAULT_SVNPATH="http://svn.planet-lab.org/svn/build/trunk"
-DEFAULT_WEBPATH="/build/@PLDISTRO@/"
-
-DEFAULT_BUILDREPO="http://build.planet-lab.org/install-rpms/archive/"
-DEFAULT_REPOURL="@BUILDREPO@/@PLDISTRO@/@FCDISTRO@/@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@/RPMS"
-
-# 10.1 subnet allocated for testing at Princeton
-DEFAULT_IPPREFIX16="10.1"
-
-# default to eth0
-DEFAULT_TESTVSERVER_DEV=0
-
-# for the test part
-TESTSVNPATH="http://svn.planet-lab.org/svn/tests/trunk/system/"
-
-####################
-# assuming vserver runs in UTC
-DATE=$(date +'%Y.%m.%d')
-
-# Notify recipient of failure or success, manage various stamps 
-function failure() {
-    set -x
-    WEBLOG=${WEBPATH}/${BASE}.test-log.txt
-    cp $LOG ${WEBLOG}
-    (echo -n "============================== $COMMAND: failure at " ; date ; tail -c 20k $WEBLOG) > ${WEBLOG}.ko
-    if [ -n "$MAILTO" ] ; then
-	tail -c 20k ${WEBLOG} | mail -s "Failures for test ${BASE}" $MAILTO
-    fi
-    exit 1
-}
-
-function success () {
-    set -x
-    WEBLOG=${WEBPATH}/${BASE}.test-log.txt
-    cp $LOG ${WEBLOG}
-    touch ${WEBLOG}.ok
-    if [ -n "$MAILTO" ] ; then
-	(echo "$PLDISTRO ($BASE) tests for $FCDISTRO completed on $(date)" ) | mail -s "Successful test for ${BASE}" $MAILTO
-    fi
-    exit 0
-}
-
-function show_env () {
-    set +x
-    echo FCDISTRO=$FCDISTRO
-    echo PLDISTRO=$PLDISTRO
-    echo BASE=$BASE
-    echo SVNPATH=$SVNPATH
-    echo MAKEVARS="${MAKEVARS[@]}"
-    echo MAKEOPTS="${MAKEOPTS[@]}"
-    echo PLDISTROTAGS="$PLDISTROTAGS"
-    echo TAGSRELEASE="$TAGSRELEASE"
-    echo -n "(might be unexpanded)"
-    echo WEBPATH="$WEBPATH"
-    if [ -d /vservers ] ; then
-	echo PLDISTROTAGS="$PLDISTROTAGS"
-    else
-	echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
-	cat /build/$PLDISTROTAGS
-	echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
-    fi
-    set -x
-}
-
-function usage () {
-    ### set BASE from DISTRO, if unspecified
-    echo "Usage: $COMMAND [option] make-targets"
-    echo "This is $REVISION"
-    echo "Supported options"
-    echo " -n dry-run : -n passed to make - vserver gets created though - no mail sent"
-    echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
-    echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
-    echo " -b base - defaults to $DEFAULT_BASE"
-    echo "    @NAME@ replaced as appropriate, which currently defaults to $BASE"
-    echo " -p personality - defaults to $DEFAULT_PERSONALITY"
-    echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
-    echo " -r tagsrelease - a release number that refers to PLDISTROTAGS - defaults to HEAD"
-    echo " -s svnpath - where to fetch the build module"
-    echo " -o : overwrite - re-run in base directory, do not create vserver"
-    echo " -m mailto"
-    echo " -a makevar=value - space in values are not supported"
-    echo " -u repourl -- defaults to $DEFAULT_REPOURL"
-    echo "    @NAME@ replaced as appropriate, which currently defaults to $REPOURL"
-    echo " -w webpath - defaults to $DEFAULT_WEBPATH"
-    echo "    @NAME@ replaced as appropriate, which currently defaults to $WEBPATH"
-    echo " -j ip address ; use this to give the vserver an explicit IP address; also see -i."
-    echo " -i /16 ip subnet for auto IP address selection within the subnet -- defaults to $DEFAULT_IPPREFIX16"
-    echo "    This is only used when no explicit IP address is specified."
-    echo " -v : be verbose"
-    echo " -7 : uses weekday-@FCDISTRO@ as base -- defaults to $(date +%a|tr A-Z a-z)-$FCDISTRO"
-    exit 1
-}
-
-function main () {
-
-    set -e
-
-    # preserve arguments for passing them again later
-    declare -a argv
-    for arg in "$@"; do argv=(${argv[@]} "$arg") ; done
-    
-    # set defaults
-    [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
-    [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
-    [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
-    [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
-    [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
-    [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
-    [ -z "$SVNPATH" ] && SVNPATH="$DEFAULT_SVNPATH"
-    [ -z "$BUILDREPO" ] && BUILDREPO="$DEFAULT_BUILDREPO"
-    [ -z "$REPOURL" ] && REPOURL="$DEFAULT_REPOURL"
-    [ -z "$IPPREFIX16" ] && IPPREFIX16="$DEFAULT_IPPREFIX16"
-    [ -z "$TESTVSERVER_DEV" ] && TESTVSERVER_DEV="$DEFAULT_TESTVSERVER_DEV"
-
-    # parse arguments
-    MAKEVARS=()
-    MAKEOPTS=()
-    while getopts "nf:d:b:p:t:r:s:om:a:u:w:i:j:vh7" opt ; do
-	case $opt in
-	    n) DRY_RUN="true" ; MAKEOPTS=(${MAKEOPTS[@]} -n) ; MAILTO="";;
-	    f) FCDISTRO=$OPTARG ;;
-	    d) PLDISTRO=$OPTARG ;;
-	    b) BASE=$OPTARG ;;
-	    p) PERSONALITY=$OPTARG ;;
-	    t) PLDISTROTAGS=$OPTARG ;;
-	    r) TAGSRELEASE=$OPTARG ;;
-	    s) SVNPATH=$OPTARG ;;
-	    o) OVERWRITEMODE=true ;;
-	    m) MAILTO=$OPTARG ;;
-	    a) MAKEVARS=(${MAKEVARS[@]} "$OPTARG") ;;
-	    u) REPOURL=$OPTARG ;;
-	    w) WEBPATH=$OPTARG ;;
-	    i) IPPREFIX16=$OPTARG ;;
-	    j) TESTVSERVER_IP=$OPTARG ;;
-	    v) set -x ;;
-	    7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ;;
-	    h|*) usage ;;
-	esac
-    done
-	
-    shift $(($OPTIND - 1))
-    MAKETARGETS="$@"
-    
-    ### set BASE from DISTRO, if unspecified
-    sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
-    BASE=$(echo ${BASE} | sed $sedargs)
-    WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
-    REPOURL=$(echo ${REPOURL} | sed $sedargs)
-    sedargs="-e s,@BUILDREPO@,${BUILDREPO},g"
-    REPOURL=$(echo ${REPOURL} | sed $sedargs)
-    
-    trap failure ERR INT
-    # create vserver: check it does not exist yet
-    i=
-    while [ -d /vservers/${BASE}${i} ] ; do
-	# we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
-	[ -z ${i} ] && BASE=${BASE}-n
-	i=$((${i}+1))
-	if [ $i -gt 100 ] ; then
-	    echo "$COMMAND: Failed to create build vserver /vservers/${BASE}${i}"
-	    exit 1
-	fi
-    done
-    BASE=${BASE}${i}
-    # need update
-    # manage LOG - beware it might be a symlink so nuke it first
-    LOG=/vservers/${BASE}.log.txt
-    rm -f $LOG
-    exec > $LOG 2>&1 
-    set -x
-    echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
-    show_env
-
-    ### extract the whole build - much simpler
-    tmpdir=/tmp/$COMMAND-$$
-    svn export $SVNPATH $tmpdir
-    # Create vserver
-    cd $tmpdir
-    ./vtest-initvm.sh -i eth${TESTVSERVER_DEV} -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} ${BASE} ${REPOURL}
-    # cleanup
-    cd -
-    rm -rf $tmpdir
-
-    vserver ${BASE} stop
-    rm -f /etc/vservers/${BASE}/interfaces/0/*
-    if [ -z "$TESTVSERVER_IP" ] ; then
-	xid=$(cat /etc/vservers/${BASE}/context)
-	TESTVSERVER_IP=$(python -c "context=int($xid); print '%s.%d.%d' % ($IPPREFIX16,(context&0xff00)>>8,context&0xff)")
-    fi
-    mkdir -p /etc/vservers/${BASE}/interfaces/0
-    echo "${TESTVSERVER_IP}" > /etc/vservers/${BASE}/interfaces/0/ip
-    echo "eth${TESTVSERVER_DEV}" > /etc/vservers/${BASE}/interfaces/0/dev
-    vserver ${BASE} start
-    echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
-
-    # The log inside the vserver contains everything
-    LOG2=/vservers/${BASE}/log.txt
-    (echo "==================== BEG VSERVER Transcript of vserver creation" ; \
-	cat $LOG ; \
-	echo "==================== END VSERVER Transcript of vserver creation" ; \
-	echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
-    ### not too nice : nuke the former log, symlink it to the new one
-    rm $LOG; ln -s $LOG2 $LOG
-    LOG=$LOG2
-    # redirect log again
-    exec >> $LOG 2>&1 
-
-    svn cat ${TESTSVNPATH}/selftest > /vservers/${BASE}/selftest
-    vserver ${BASE} exec chmod +x /selftest
-    vserver ${BASE} exec /selftest ${BASE}.$(hostname) ${TESTVSERVER_IP}
-    success 
-}  
-
-##########
-main "$@"