+++ /dev/null
-# Makefile.in generated by automake 1.9.4 from Makefile.am.
-# Makefile. Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-srcdir = .
-top_srcdir = .
-
-pkgdatadir = $(datadir)/fprobe-ulog
-pkglibdir = $(libdir)/fprobe-ulog
-pkgincludedir = $(includedir)/fprobe-ulog
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = /usr/bin/install -c
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = i686-pc-linux-gnu
-host_triplet = i686-pc-linux-gnu
-target_triplet = i686-pc-linux-gnu
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
- TODO config.guess config.sub install-sh missing mkinstalldirs
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-depcomp =
-am__depfiles_maybe =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = ${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run aclocal-1.9
-AMDEP_FALSE = #
-AMDEP_TRUE =
-AMTAR = ${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run tar
-AUTOCONF = ${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run automake-1.9
-AWK = gawk
-CC = gcc
-CCDEPMODE = depmode=none
-CFLAGS = -g -O2 -D_BSD_SOURCE -D_REENTRANT -DWALL -W -Wall
-CPP = gcc -E
-CPPFLAGS =
-CYGPATH_W = echo
-DATE = 2007-11-08
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO_C =
-ECHO_N = -n
-ECHO_T =
-EGREP = grep -E
-EXEEXT =
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
-LDFLAGS =
-LIBOBJS =
-LIBS = -lpthread
-LTLIBOBJS =
-MAKEINFO = ${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run makeinfo
-OBJEXT = o
-PACKAGE = fprobe-ulog
-PACKAGE_BUGREPORT =
-PACKAGE_NAME =
-PACKAGE_STRING =
-PACKAGE_TARNAME =
-PACKAGE_VERSION =
-PATH_SEPARATOR = :
-RANLIB = ranlib
-SET_MAKE =
-SHELL = /bin/sh
-STRIP =
-VERSION = 1.1
-ac_ct_CC = gcc
-ac_ct_RANLIB = ranlib
-ac_ct_STRIP =
-am__fastdepCC_FALSE =
-am__fastdepCC_TRUE = #
-am__include = include
-am__leading_dot = .
-am__quote =
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = i686-pc-linux-gnu
-build_alias =
-build_cpu = i686
-build_os = linux-gnu
-build_vendor = pc
-datadir = ${prefix}/share
-exec_prefix = ${prefix}
-host = i686-pc-linux-gnu
-host_alias =
-host_cpu = i686
-host_os = linux-gnu
-host_vendor = pc
-includedir = ${prefix}/include
-infodir = ${prefix}/info
-install_sh = /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localstatedir = ${prefix}/var
-mandir = ${prefix}/man
-mkdir_p = mkdir -p --
-oldincludedir = /usr/include
-prefix = /usr/local
-program_transform_name = s,x,x,
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-sysconfdir = ${prefix}/etc
-target = i686-pc-linux-gnu
-target_alias =
-target_cpu = i686
-target_os = linux-gnu
-target_vendor = pc
-EXTRA_DIST = autogen.sh fprobe-ulog.spec version \
- contrib/tg.sh contrib/ipt_ULOG.patch
-
-SUBDIRS = src
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps'; \
- cd $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu --ignore-deps Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- mkdir $(distdir)
- $(mkdir_p) $(distdir)/contrib
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(mkdir_p) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
- distdir) \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
- check-am clean clean-generic clean-recursive ctags \
- ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
- dist-tarZ dist-zip distcheck distclean distclean-generic \
- distclean-hdr distclean-recursive distclean-tags \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic maintainer-clean-recursive \
- mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by configure, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- $ ./configure --enable-messages=yes --enable-uptime_trick=no
-
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = joyce
-uname -m = i686
-uname -r = 2.6.20.1
-uname -s = Linux
-uname -v = #1 SMP Thu Sep 13 13:04:46 EDT 2007
-
-/usr/bin/uname -p = Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
-/bin/uname -X = unknown
-
-/bin/arch = i686
-/usr/bin/arch -k = unknown
-/usr/convex/getsysinfo = unknown
-hostinfo = unknown
-/bin/machine = unknown
-/usr/bin/oslevel = unknown
-/bin/universe = unknown
-
-PATH: /usr/local/bin
-PATH: /usr/bin
-PATH: /bin
-PATH: /opt/bin
-PATH: /usr/i686-pc-linux-gnu/gcc-bin/4.1.1
-PATH: /usr/qt/3/bin
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-configure:1328: checking build system type
-configure:1346: result: i686-pc-linux-gnu
-configure:1354: checking host system type
-configure:1368: result: i686-pc-linux-gnu
-configure:1376: checking target system type
-configure:1390: result: i686-pc-linux-gnu
-configure:1418: checking for a BSD-compatible install
-configure:1473: result: /usr/bin/install -c
-configure:1484: checking whether build environment is sane
-configure:1527: result: yes
-configure:1592: checking for gawk
-configure:1608: found /usr/bin/gawk
-configure:1618: result: gawk
-configure:1628: checking whether make sets $(MAKE)
-configure:1648: result: yes
-configure:1865: checking for gcc
-configure:1881: found /usr/bin/gcc
-configure:1891: result: gcc
-configure:2135: checking for C compiler version
-configure:2138: gcc --version </dev/null >&5
-gcc (GCC) 4.1.1 (Gentoo 4.1.1)
-Copyright (C) 2006 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:2141: $? = 0
-configure:2143: gcc -v </dev/null >&5
-Using built-in specs.
-Target: i686-pc-linux-gnu
-Configured with: /var/tmp/portage/gcc-4.1.1/work/gcc-4.1.1/configure --prefix=/usr --bindir=/usr/i686-pc-linux-gnu/gcc-bin/4.1.1 --includedir=/usr/lib/gcc/i686-pc-linux-gnu/4.1.1/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/4.1.1 --mandir=/usr/share/gcc-data/i686-pc-linux-gnu/4.1.1/man --infodir=/usr/share/gcc-data/i686-pc-linux-gnu/4.1.1/info --with-gxx-include-dir=/usr/lib/gcc/i686-pc-linux-gnu/4.1.1/include/g++-v4 --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --disable-libunwind-exceptions --disable-multilib --disable-libmudflap --disable-libssp --disable-libgcj --enable-languages=c,c++,fortran --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu
-Thread model: posix
-gcc version 4.1.1 (Gentoo 4.1.1)
-configure:2146: $? = 0
-configure:2148: gcc -V </dev/null >&5
-gcc: '-V' option must have argument
-configure:2151: $? = 1
-configure:2174: checking for C compiler default output file name
-configure:2177: gcc conftest.c >&5
-configure:2180: $? = 0
-configure:2226: result: a.out
-configure:2231: checking whether the C compiler works
-configure:2237: ./a.out
-configure:2240: $? = 0
-configure:2257: result: yes
-configure:2264: checking whether we are cross compiling
-configure:2266: result: no
-configure:2269: checking for suffix of executables
-configure:2271: gcc -o conftest conftest.c >&5
-configure:2274: $? = 0
-configure:2299: result:
-configure:2305: checking for suffix of object files
-configure:2326: gcc -c conftest.c >&5
-configure:2329: $? = 0
-configure:2351: result: o
-configure:2355: checking whether we are using the GNU C compiler
-configure:2379: gcc -c conftest.c >&5
-configure:2385: $? = 0
-configure:2388: test -z || test ! -s conftest.err
-configure:2391: $? = 0
-configure:2394: test -s conftest.o
-configure:2397: $? = 0
-configure:2410: result: yes
-configure:2416: checking whether gcc accepts -g
-configure:2437: gcc -c -g conftest.c >&5
-configure:2443: $? = 0
-configure:2446: test -z || test ! -s conftest.err
-configure:2449: $? = 0
-configure:2452: test -s conftest.o
-configure:2455: $? = 0
-configure:2466: result: yes
-configure:2483: checking for gcc option to accept ANSI C
-configure:2553: gcc -c -g -O2 conftest.c >&5
-configure:2559: $? = 0
-configure:2562: test -z || test ! -s conftest.err
-configure:2565: $? = 0
-configure:2568: test -s conftest.o
-configure:2571: $? = 0
-configure:2589: result: none needed
-configure:2607: gcc -c -g -O2 conftest.c >&5
-conftest.c:2: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'me'
-configure:2613: $? = 1
-configure: failed program was:
-| #ifndef __cplusplus
-| choke me
-| #endif
-configure:2754: checking for style of include used by make
-configure:2782: result: GNU
-configure:2810: checking dependency style of gcc
-configure:2900: result: none
-configure:2930: checking for a BSD-compatible install
-configure:2985: result: /usr/bin/install -c
-configure:3037: checking for ranlib
-configure:3053: found /usr/bin/ranlib
-configure:3064: result: ranlib
-configure:3079: checking for pthread_create in -lpthread
-configure:3109: gcc -o conftest -g -O2 conftest.c -lpthread >&5
-configure:3115: $? = 0
-configure:3118: test -z || test ! -s conftest.err
-configure:3121: $? = 0
-configure:3124: test -s conftest
-configure:3127: $? = 0
-configure:3140: result: yes
-configure:3162: checking how to run the C preprocessor
-configure:3197: gcc -E conftest.c
-configure:3203: $? = 0
-configure:3235: gcc -E conftest.c
-conftest.c:12:28: error: ac_nonexistent.h: No such file or directory
-configure:3241: $? = 1
-configure: failed program was:
-| /* confdefs.h. */
-|
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "fprobe-ulog"
-| #define VERSION "1.1"
-| #define HAVE_LIBPTHREAD 1
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:3280: result: gcc -E
-configure:3304: gcc -E conftest.c
-configure:3310: $? = 0
-configure:3342: gcc -E conftest.c
-conftest.c:12:28: error: ac_nonexistent.h: No such file or directory
-configure:3348: $? = 1
-configure: failed program was:
-| /* confdefs.h. */
-|
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "fprobe-ulog"
-| #define VERSION "1.1"
-| #define HAVE_LIBPTHREAD 1
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:3392: checking for egrep
-configure:3402: result: grep -E
-configure:3407: checking for ANSI C header files
-configure:3432: gcc -c -g -O2 conftest.c >&5
-configure:3438: $? = 0
-configure:3441: test -z || test ! -s conftest.err
-configure:3444: $? = 0
-configure:3447: test -s conftest.o
-configure:3450: $? = 0
-configure:3539: gcc -o conftest -g -O2 conftest.c -lpthread >&5
-conftest.c: In function 'main':
-conftest.c:29: warning: incompatible implicit declaration of built-in function 'exit'
-configure:3542: $? = 0
-configure:3544: ./conftest
-configure:3547: $? = 0
-configure:3562: result: yes
-configure:3586: checking for sys/types.h
-configure:3602: gcc -c -g -O2 conftest.c >&5
-configure:3608: $? = 0
-configure:3611: test -z || test ! -s conftest.err
-configure:3614: $? = 0
-configure:3617: test -s conftest.o
-configure:3620: $? = 0
-configure:3631: result: yes
-configure:3586: checking for sys/stat.h
-configure:3602: gcc -c -g -O2 conftest.c >&5
-configure:3608: $? = 0
-configure:3611: test -z || test ! -s conftest.err
-configure:3614: $? = 0
-configure:3617: test -s conftest.o
-configure:3620: $? = 0
-configure:3631: result: yes
-configure:3586: checking for stdlib.h
-configure:3602: gcc -c -g -O2 conftest.c >&5
-configure:3608: $? = 0
-configure:3611: test -z || test ! -s conftest.err
-configure:3614: $? = 0
-configure:3617: test -s conftest.o
-configure:3620: $? = 0
-configure:3631: result: yes
-configure:3586: checking for string.h
-configure:3602: gcc -c -g -O2 conftest.c >&5
-configure:3608: $? = 0
-configure:3611: test -z || test ! -s conftest.err
-configure:3614: $? = 0
-configure:3617: test -s conftest.o
-configure:3620: $? = 0
-configure:3631: result: yes
-configure:3586: checking for memory.h
-configure:3602: gcc -c -g -O2 conftest.c >&5
-configure:3608: $? = 0
-configure:3611: test -z || test ! -s conftest.err
-configure:3614: $? = 0
-configure:3617: test -s conftest.o
-configure:3620: $? = 0
-configure:3631: result: yes
-configure:3586: checking for strings.h
-configure:3602: gcc -c -g -O2 conftest.c >&5
-configure:3608: $? = 0
-configure:3611: test -z || test ! -s conftest.err
-configure:3614: $? = 0
-configure:3617: test -s conftest.o
-configure:3620: $? = 0
-configure:3631: result: yes
-configure:3586: checking for inttypes.h
-configure:3602: gcc -c -g -O2 conftest.c >&5
-configure:3608: $? = 0
-configure:3611: test -z || test ! -s conftest.err
-configure:3614: $? = 0
-configure:3617: test -s conftest.o
-configure:3620: $? = 0
-configure:3631: result: yes
-configure:3586: checking for stdint.h
-configure:3602: gcc -c -g -O2 conftest.c >&5
-configure:3608: $? = 0
-configure:3611: test -z || test ! -s conftest.err
-configure:3614: $? = 0
-configure:3617: test -s conftest.o
-configure:3620: $? = 0
-configure:3631: result: yes
-configure:3586: checking for unistd.h
-configure:3602: gcc -c -g -O2 conftest.c >&5
-configure:3608: $? = 0
-configure:3611: test -z || test ! -s conftest.err
-configure:3614: $? = 0
-configure:3617: test -s conftest.o
-configure:3620: $? = 0
-configure:3631: result: yes
-configure:3644: checking for inttypes.h
-configure:3649: result: yes
-configure:5018: checking which memory bulk indexing mode to use
-configure:5046: result: "ptr"
-configure:5055: checking which hash type and size to use
-configure:5098: result: "crc16"
-configure:5102: checking whether to enable uptime trick
-configure:5122: result: no
-configure:5128: checking whether to enable icmp trick
-configure:5139: result: yes
-configure:5163: checking whether to enable debugging
-configure:5174: result: no
-configure:5200: checking whether to enable runtime messages
-configure:5211: result: yes
-configure:5226: checking directory to store pidfiles
-configure:5241: result: "/var/run"
-configure:5310: creating ./config.status
-
-## ---------------------- ##
-## Running config.status. ##
-## ---------------------- ##
-
-This file was extended by config.status, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- CONFIG_FILES =
- CONFIG_HEADERS =
- CONFIG_LINKS =
- CONFIG_COMMANDS =
- $ ./config.status
-
-on joyce
-
-config.status:745: creating Makefile
-config.status:745: creating src/Makefile
-config.status:745: creating src/libipulog/Makefile
-config.status:811: creating config.h
-config.status:1117: executing depfiles commands
-
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-
-ac_cv_build=i686-pc-linux-gnu
-ac_cv_build_alias=i686-pc-linux-gnu
-ac_cv_c_compiler_gnu=yes
-ac_cv_env_CC_set=
-ac_cv_env_CC_value=
-ac_cv_env_CFLAGS_set=
-ac_cv_env_CFLAGS_value=
-ac_cv_env_CPPFLAGS_set=
-ac_cv_env_CPPFLAGS_value=
-ac_cv_env_CPP_set=
-ac_cv_env_CPP_value=
-ac_cv_env_LDFLAGS_set=
-ac_cv_env_LDFLAGS_value=
-ac_cv_env_build_alias_set=
-ac_cv_env_build_alias_value=
-ac_cv_env_host_alias_set=
-ac_cv_env_host_alias_value=
-ac_cv_env_target_alias_set=
-ac_cv_env_target_alias_value=
-ac_cv_exeext=
-ac_cv_header_inttypes_h=yes
-ac_cv_header_memory_h=yes
-ac_cv_header_stdc=yes
-ac_cv_header_stdint_h=yes
-ac_cv_header_stdlib_h=yes
-ac_cv_header_string_h=yes
-ac_cv_header_strings_h=yes
-ac_cv_header_sys_stat_h=yes
-ac_cv_header_sys_types_h=yes
-ac_cv_header_unistd_h=yes
-ac_cv_host=i686-pc-linux-gnu
-ac_cv_host_alias=i686-pc-linux-gnu
-ac_cv_lib_pthread_pthread_create=yes
-ac_cv_objext=o
-ac_cv_path_install='/usr/bin/install -c'
-ac_cv_prog_AWK=gawk
-ac_cv_prog_CPP='gcc -E'
-ac_cv_prog_ac_ct_CC=gcc
-ac_cv_prog_ac_ct_RANLIB=ranlib
-ac_cv_prog_cc_g=yes
-ac_cv_prog_cc_stdc=
-ac_cv_prog_egrep='grep -E'
-ac_cv_prog_make_make_set=yes
-ac_cv_target=i686-pc-linux-gnu
-ac_cv_target_alias=i686-pc-linux-gnu
-am_cv_CC_dependencies_compiler_type=none
-
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-
-ACLOCAL='${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run aclocal-1.9'
-AMDEPBACKSLASH='\'
-AMDEP_FALSE='#'
-AMDEP_TRUE=''
-AMTAR='${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run tar'
-AUTOCONF='${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run autoconf'
-AUTOHEADER='${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run autoheader'
-AUTOMAKE='${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run automake-1.9'
-AWK='gawk'
-CC='gcc'
-CCDEPMODE='depmode=none'
-CFLAGS='-g -O2 -D_BSD_SOURCE -D_REENTRANT -DWALL -W -Wall'
-CPP='gcc -E'
-CPPFLAGS=''
-CYGPATH_W='echo'
-DATE='2007-11-08'
-DEFS='-DHAVE_CONFIG_H'
-DEPDIR='.deps'
-ECHO_C=''
-ECHO_N='-n'
-ECHO_T=''
-EGREP='grep -E'
-EXEEXT=''
-INSTALL_DATA='${INSTALL} -m 644'
-INSTALL_PROGRAM='${INSTALL}'
-INSTALL_SCRIPT='${INSTALL}'
-INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
-LDFLAGS=''
-LIBOBJS=''
-LIBS='-lpthread '
-LTLIBOBJS=''
-MAKEINFO='${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run makeinfo'
-OBJEXT='o'
-PACKAGE='fprobe-ulog'
-PACKAGE_BUGREPORT=''
-PACKAGE_NAME=''
-PACKAGE_STRING=''
-PACKAGE_TARNAME=''
-PACKAGE_VERSION=''
-PATH_SEPARATOR=':'
-RANLIB='ranlib'
-SET_MAKE=''
-SHELL='/bin/sh'
-STRIP=''
-VERSION='1.1'
-ac_ct_CC='gcc'
-ac_ct_RANLIB='ranlib'
-ac_ct_STRIP=''
-am__fastdepCC_FALSE=''
-am__fastdepCC_TRUE='#'
-am__include='include'
-am__leading_dot='.'
-am__quote=''
-am__tar='${AMTAR} chof - "$$tardir"'
-am__untar='${AMTAR} xf -'
-bindir='${exec_prefix}/bin'
-build='i686-pc-linux-gnu'
-build_alias=''
-build_cpu='i686'
-build_os='linux-gnu'
-build_vendor='pc'
-datadir='${prefix}/share'
-exec_prefix='${prefix}'
-host='i686-pc-linux-gnu'
-host_alias=''
-host_cpu='i686'
-host_os='linux-gnu'
-host_vendor='pc'
-includedir='${prefix}/include'
-infodir='${prefix}/info'
-install_sh='/home/sapan/Projects/planetlab/fprobe/fprobe-ulog/install-sh'
-libdir='${exec_prefix}/lib'
-libexecdir='${exec_prefix}/libexec'
-localstatedir='${prefix}/var'
-mandir='${prefix}/man'
-mkdir_p='mkdir -p --'
-oldincludedir='/usr/include'
-prefix='/usr/local'
-program_transform_name='s,x,x,'
-sbindir='${exec_prefix}/sbin'
-sharedstatedir='${prefix}/com'
-sysconfdir='${prefix}/etc'
-target='i686-pc-linux-gnu'
-target_alias=''
-target_cpu='i686'
-target_os='linux-gnu'
-target_vendor='pc'
-
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-
-#define DEBUG (0)
-#define HASH_BITS 16
-#define HASH_TYPE_CRC
-#define HAVE_INTTYPES_H
-#define HAVE_INTTYPES_H 1
-#define HAVE_LIBPTHREAD 1
-#define HAVE_MEMORY_H 1
-#define HAVE_STDINT_H 1
-#define HAVE_STDLIB_H 1
-#define HAVE_STRINGS_H 1
-#define HAVE_STRING_H 1
-#define HAVE_SYS_STAT_H 1
-#define HAVE_SYS_TYPES_H 1
-#define HAVE_UNISTD_H 1
-#define ICMP_TRICK
-#define MEM_BITS 0
-#define MESSAGES
-#define OS_LINUX
-#define PACKAGE "fprobe-ulog"
-#define PACKAGE_BUGREPORT ""
-#define PACKAGE_NAME ""
-#define PACKAGE_STRING ""
-#define PACKAGE_TARNAME ""
-#define PACKAGE_VERSION ""
-#define PID_DIR "/var/run"
-#define STDC_HEADERS 1
-#define VERSION "1.1"
-
-configure: exit 0
+++ /dev/null
-#! /bin/sh
-# Generated by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=${CONFIG_SHELL-/bin/sh}
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-config_files=" Makefile src/Makefile src/libipulog/Makefile"
-config_headers=" config.h"
-config_commands=" depfiles"
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-ac_cs_version="\
-config.status
-configured by ./configure, generated by GNU Autoconf 2.59,
- with options \"'--enable-messages=yes' '--enable-uptime_trick=no'\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=.
-INSTALL="/usr/bin/install -c"
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- -*)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1" ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-if $ac_cs_recheck; then
- echo "running /bin/sh ./configure " '--enable-messages=yes' '--enable-uptime_trick=no' $ac_configure_extra_args " --no-create --no-recursion" >&6
- exec /bin/sh ./configure '--enable-messages=yes' '--enable-uptime_trick=no' $ac_configure_extra_args --no-create --no-recursion
-fi
-
-#
-# INIT-COMMANDS section.
-#
-
-AMDEP_TRUE="" ac_aux_dir="."
-
-for ac_config_target in $ac_config_targets
-do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
- "src/libipulog/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/libipulog/Makefile" ;;
- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
-s,@SHELL@,/bin/sh,;t t
-s,@PATH_SEPARATOR@,:,;t t
-s,@PACKAGE_NAME@,,;t t
-s,@PACKAGE_TARNAME@,,;t t
-s,@PACKAGE_VERSION@,,;t t
-s,@PACKAGE_STRING@,,;t t
-s,@PACKAGE_BUGREPORT@,,;t t
-s,@exec_prefix@,${prefix},;t t
-s,@prefix@,/usr/local,;t t
-s,@program_transform_name@,s,x,x,,;t t
-s,@bindir@,${exec_prefix}/bin,;t t
-s,@sbindir@,${exec_prefix}/sbin,;t t
-s,@libexecdir@,${exec_prefix}/libexec,;t t
-s,@datadir@,${prefix}/share,;t t
-s,@sysconfdir@,${prefix}/etc,;t t
-s,@sharedstatedir@,${prefix}/com,;t t
-s,@localstatedir@,${prefix}/var,;t t
-s,@libdir@,${exec_prefix}/lib,;t t
-s,@includedir@,${prefix}/include,;t t
-s,@oldincludedir@,/usr/include,;t t
-s,@infodir@,${prefix}/info,;t t
-s,@mandir@,${prefix}/man,;t t
-s,@build_alias@,,;t t
-s,@host_alias@,,;t t
-s,@target_alias@,,;t t
-s,@DEFS@,-DHAVE_CONFIG_H,;t t
-s,@ECHO_C@,,;t t
-s,@ECHO_N@,-n,;t t
-s,@ECHO_T@,,;t t
-s,@LIBS@,-lpthread ,;t t
-s,@build@,i686-pc-linux-gnu,;t t
-s,@build_cpu@,i686,;t t
-s,@build_vendor@,pc,;t t
-s,@build_os@,linux-gnu,;t t
-s,@host@,i686-pc-linux-gnu,;t t
-s,@host_cpu@,i686,;t t
-s,@host_vendor@,pc,;t t
-s,@host_os@,linux-gnu,;t t
-s,@target@,i686-pc-linux-gnu,;t t
-s,@target_cpu@,i686,;t t
-s,@target_vendor@,pc,;t t
-s,@target_os@,linux-gnu,;t t
-s,@INSTALL_PROGRAM@,${INSTALL},;t t
-s,@INSTALL_SCRIPT@,${INSTALL},;t t
-s,@INSTALL_DATA@,${INSTALL} -m 644,;t t
-s,@CYGPATH_W@,echo,;t t
-s,@PACKAGE@,fprobe-ulog,;t t
-s,@VERSION@,1.1,;t t
-s,@ACLOCAL@,${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run aclocal-1.9,;t t
-s,@AUTOCONF@,${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run autoconf,;t t
-s,@AUTOMAKE@,${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run automake-1.9,;t t
-s,@AUTOHEADER@,${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run autoheader,;t t
-s,@MAKEINFO@,${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run makeinfo,;t t
-s,@install_sh@,/home/sapan/Projects/planetlab/fprobe/fprobe-ulog/install-sh,;t t
-s,@STRIP@,,;t t
-s,@ac_ct_STRIP@,,;t t
-s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t
-s,@mkdir_p@,mkdir -p --,;t t
-s,@AWK@,gawk,;t t
-s,@SET_MAKE@,,;t t
-s,@am__leading_dot@,.,;t t
-s,@AMTAR@,${SHELL} /home/sapan/Projects/planetlab/fprobe/fprobe-ulog/missing --run tar,;t t
-s,@am__tar@,${AMTAR} chof - "$$tardir",;t t
-s,@am__untar@,${AMTAR} xf -,;t t
-s,@CC@,gcc,;t t
-s,@CFLAGS@,-g -O2 -D_BSD_SOURCE -D_REENTRANT -DWALL -W -Wall,;t t
-s,@LDFLAGS@,,;t t
-s,@CPPFLAGS@,,;t t
-s,@ac_ct_CC@,gcc,;t t
-s,@EXEEXT@,,;t t
-s,@OBJEXT@,o,;t t
-s,@DEPDIR@,.deps,;t t
-s,@am__include@,include,;t t
-s,@am__quote@,,;t t
-s,@AMDEP_TRUE@,,;t t
-s,@AMDEP_FALSE@,#,;t t
-s,@AMDEPBACKSLASH@,\,;t t
-s,@CCDEPMODE@,depmode=none,;t t
-s,@am__fastdepCC_TRUE@,#,;t t
-s,@am__fastdepCC_FALSE@,,;t t
-s,@RANLIB@,ranlib,;t t
-s,@ac_ct_RANLIB@,ranlib,;t t
-s,@CPP@,gcc -E,;t t
-s,@EGREP@,grep -E,;t t
-s,@DATE@,2007-11-08,;t t
-s,@LIBOBJS@,,;t t
-s,@LTLIBOBJS@,,;t t
-CEOF
-
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
-fi # test -n "$CONFIG_FILES"
-
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
-
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- sed "/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}
-
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
-
-done
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='[ ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- # Do quote $f, to prevent DOS paths from being IFS'd.
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
- # Remove the trailing spaces.
- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-
- # Handle all the #define templates only if necessary.
- if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then
- # If there are no defines, we may have an empty if/fi
- :
- cat >$tmp/defines.sed <<CEOF
-/^[ ]*#[ ]*define/!b
-t clr
-: clr
-${ac_dA}PACKAGE_NAME${ac_dB}PACKAGE_NAME${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE_TARNAME${ac_dB}PACKAGE_TARNAME${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE_VERSION${ac_dB}PACKAGE_VERSION${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE_STRING${ac_dB}PACKAGE_STRING${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE_BUGREPORT${ac_dB}PACKAGE_BUGREPORT${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE${ac_dB}PACKAGE${ac_dC}"fprobe-ulog"${ac_dD}
-${ac_dA}VERSION${ac_dB}VERSION${ac_dC}"1.1"${ac_dD}
-${ac_dA}HAVE_LIBPTHREAD${ac_dB}HAVE_LIBPTHREAD${ac_dC}1${ac_dD}
-${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_TYPES_H${ac_dB}HAVE_SYS_TYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_STAT_H${ac_dB}HAVE_SYS_STAT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRING_H${ac_dB}HAVE_STRING_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MEMORY_H${ac_dB}HAVE_MEMORY_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRINGS_H${ac_dB}HAVE_STRINGS_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_INTTYPES_H${ac_dB}HAVE_INTTYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDINT_H${ac_dB}HAVE_STDINT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_INTTYPES_H${ac_dB}HAVE_INTTYPES_H${ac_dC}${ac_dD}
-${ac_dA}OS_LINUX${ac_dB}OS_LINUX${ac_dC}${ac_dD}
-${ac_dA}MEM_BITS${ac_dB}MEM_BITS${ac_dC}0${ac_dD}
-${ac_dA}HASH_TYPE_CRC${ac_dB}HASH_TYPE_CRC${ac_dC}${ac_dD}
-${ac_dA}HASH_BITS${ac_dB}HASH_BITS${ac_dC}16${ac_dD}
-${ac_dA}ICMP_TRICK${ac_dB}ICMP_TRICK${ac_dC}${ac_dD}
-${ac_dA}DEBUG${ac_dB}DEBUG${ac_dC}(0)${ac_dD}
-${ac_dA}MESSAGES${ac_dB}MESSAGES${ac_dC}${ac_dD}
-${ac_dA}PID_DIR${ac_dB}PID_DIR${ac_dC}"/var/run"${ac_dD}
-CEOF
- sed -f $tmp/defines.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-
- fi # grep
-
- # Handle all the #undef templates
- cat >$tmp/undefs.sed <<CEOF
-/^[ ]*#[ ]*undef/!b
-t clr
-: clr
-${ac_uA}PACKAGE_NAME${ac_uB}PACKAGE_NAME${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE_TARNAME${ac_uB}PACKAGE_TARNAME${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE_VERSION${ac_uB}PACKAGE_VERSION${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE_STRING${ac_uB}PACKAGE_STRING${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE_BUGREPORT${ac_uB}PACKAGE_BUGREPORT${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE${ac_uB}PACKAGE${ac_uC}"fprobe-ulog"${ac_uD}
-${ac_uA}VERSION${ac_uB}VERSION${ac_uC}"1.1"${ac_uD}
-${ac_uA}HAVE_LIBPTHREAD${ac_uB}HAVE_LIBPTHREAD${ac_uC}1${ac_uD}
-${ac_uA}STDC_HEADERS${ac_uB}STDC_HEADERS${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_TYPES_H${ac_uB}HAVE_SYS_TYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_STAT_H${ac_uB}HAVE_SYS_STAT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDLIB_H${ac_uB}HAVE_STDLIB_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STRING_H${ac_uB}HAVE_STRING_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_MEMORY_H${ac_uB}HAVE_MEMORY_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STRINGS_H${ac_uB}HAVE_STRINGS_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_INTTYPES_H${ac_uB}HAVE_INTTYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDINT_H${ac_uB}HAVE_STDINT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_UNISTD_H${ac_uB}HAVE_UNISTD_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_INTTYPES_H${ac_uB}HAVE_INTTYPES_H${ac_uC}${ac_uD}
-${ac_uA}OS_LINUX${ac_uB}OS_LINUX${ac_uC}${ac_uD}
-${ac_uA}MEM_BITS${ac_uB}MEM_BITS${ac_uC}0${ac_uD}
-${ac_uA}HASH_TYPE_CRC${ac_uB}HASH_TYPE_CRC${ac_uC}${ac_uD}
-${ac_uA}HASH_BITS${ac_uB}HASH_BITS${ac_uC}16${ac_uD}
-${ac_uA}ICMP_TRICK${ac_uB}ICMP_TRICK${ac_uC}${ac_uD}
-${ac_uA}DEBUG${ac_uB}DEBUG${ac_uC}(0)${ac_uD}
-${ac_uA}MESSAGES${ac_uB}MESSAGES${ac_uC}${ac_uD}
-${ac_uA}PID_DIR${ac_uB}PID_DIR${ac_uC}"/var/run"${ac_uD}
-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-CEOF
- sed -f $tmp/undefs.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- echo "/* Generated by configure. */" >$tmp/config.h
- else
- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
- fi
- cat $tmp/in >>$tmp/config.h
- rm -f $tmp/in
- if test x"$ac_file" != x-; then
- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
- else
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- rm -f $ac_file
- mv $tmp/config.h $ac_file
- fi
- else
- cat $tmp/config.h
- rm -f $tmp/config.h
- fi
-# Compute $ac_file's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $ac_file | $ac_file:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X$ac_file : 'X\(//\)[^/]' \| \
- X$ac_file : 'X\(//\)$' \| \
- X$ac_file : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X$ac_file |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_dest" : 'X\(//\)[^/]' \| \
- X"$ac_dest" : 'X\(//\)$' \| \
- X"$ac_dest" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
- case $ac_dest in
- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`(dirname "$mf") 2>/dev/null ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`(dirname "$file") 2>/dev/null ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p $dirpart/$fdir
- else
- as_dir=$dirpart/$fdir
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
- { (exit 1); exit 1; }; }; }
-
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
- esac
-done
-
-{ (exit 0); exit 0; }
git://git.onelab.eu / fprobe-ulog.git / commitdiff