first draft for libnl 1.1
[libnl.git] / include / linux / if.h
diff --git a/include/linux/if.h b/include/linux/if.h
deleted file mode 100644 (file)
index 9128570..0000000
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * INET                An implementation of the TCP/IP protocol suite for the LINUX
- *             operating system.  INET is implemented using the  BSD Socket
- *             interface as the means of communication with the user level.
- *
- *             Global definitions for the INET interface module.
- *
- * Version:    @(#)if.h        1.0.2   04/18/93
- *
- * Authors:    Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
- *             Ross Biro
- *             Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *             This program is free software; you can redistribute it and/or
- *             modify it under the terms of the GNU General Public License
- *             as published by the Free Software Foundation; either version
- *             2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_H
-#define _LINUX_IF_H
-
-#define        IFNAMSIZ        16
-
-/* Standard interface flags (netdevice->flags). */
-#define        IFF_UP          0x1             /* interface is up              */
-#define        IFF_BROADCAST   0x2             /* broadcast address valid      */
-#define        IFF_DEBUG       0x4             /* turn on debugging            */
-#define        IFF_LOOPBACK    0x8             /* is a loopback net            */
-#define        IFF_POINTOPOINT 0x10            /* interface is has p-p link    */
-#define        IFF_NOTRAILERS  0x20            /* avoid use of trailers        */
-#define        IFF_RUNNING     0x40            /* interface running and carrier ok */
-#define        IFF_NOARP       0x80            /* no ARP protocol              */
-#define        IFF_PROMISC     0x100           /* receive all packets          */
-#define        IFF_ALLMULTI    0x200           /* receive all multicast packets*/
-
-#define IFF_MASTER     0x400           /* master of a load balancer    */
-#define IFF_SLAVE      0x800           /* slave of a load balancer     */
-
-#define IFF_MULTICAST  0x1000          /* Supports multicast           */
-
-#define IFF_VOLATILE   (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_MASTER|IFF_SLAVE|IFF_RUNNING)
-
-#define IFF_PORTSEL    0x2000          /* can set media type           */
-#define IFF_AUTOMEDIA  0x4000          /* auto media select active     */
-#define IFF_DYNAMIC    0x8000          /* dialup device with changing addresses*/
-#define IFF_LOWER_UP   0x10000         /* driver signals L1 up         */
-#define IFF_DORMANT    0x20000         /* driver signals dormant       */
-
-/* Private (from user) interface flags (netdevice->priv_flags). */
-#define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
-#define IFF_EBRIDGE    0x2             /* Ethernet bridging device.    */
-
-#define IF_GET_IFACE   0x0001          /* for querying only */
-#define IF_GET_PROTO   0x0002
-
-/* For definitions see hdlc.h */
-#define IF_IFACE_V35   0x1000          /* V.35 serial interface        */
-#define IF_IFACE_V24   0x1001          /* V.24 serial interface        */
-#define IF_IFACE_X21   0x1002          /* X.21 serial interface        */
-#define IF_IFACE_T1    0x1003          /* T1 telco serial interface    */
-#define IF_IFACE_E1    0x1004          /* E1 telco serial interface    */
-#define IF_IFACE_SYNC_SERIAL 0x1005    /* can't be set by software     */
-#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
-
-/* For definitions see hdlc.h */
-#define IF_PROTO_HDLC  0x2000          /* raw HDLC protocol            */
-#define IF_PROTO_PPP   0x2001          /* PPP protocol                 */
-#define IF_PROTO_CISCO 0x2002          /* Cisco HDLC protocol          */
-#define IF_PROTO_FR    0x2003          /* Frame Relay protocol         */
-#define IF_PROTO_FR_ADD_PVC 0x2004     /*    Create FR PVC             */
-#define IF_PROTO_FR_DEL_PVC 0x2005     /*    Delete FR PVC             */
-#define IF_PROTO_X25   0x2006          /* X.25                         */
-#define IF_PROTO_HDLC_ETH 0x2007       /* raw HDLC, Ethernet emulation */
-#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /*  Create FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /*  Delete FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_PVC        0x200A          /* for reading PVC status       */
-#define IF_PROTO_FR_ETH_PVC 0x200B
-#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
-
-
-/*
- *     Device mapping structure. I'd just gone off and designed a 
- *     beautiful scheme using only loadable modules with arguments
- *     for driver options and along come the PCMCIA people 8)
- *
- *     Ah well. The get() side of this is good for WDSETUP, and it'll
- *     be handy for debugging things. The set side is fine for now and
- *     being very small might be worth keeping for clean configuration.
- */
-
-struct ifmap 
-{
-       unsigned long mem_start;
-       unsigned long mem_end;
-       unsigned short base_addr; 
-       unsigned char irq;
-       unsigned char dma;
-       unsigned char port;
-       /* 3 bytes spare */
-};
-
-#endif /* _LINUX_IF_H */