X-Git-Url: http://git.onelab.eu/?p=libnl.git;a=blobdiff_plain;f=include%2Flinux%2Fif.h;fp=include%2Flinux%2Fif.h;h=0000000000000000000000000000000000000000;hp=9128570309d01d7ce8f4e19942f719896dde0183;hb=332c8b7561dcac7ac95cc0d07328b1cb22d780a6;hpb=eabdd897b75ecc1fac5e255229a899126085e57a

diff --git a/include/linux/if.h b/include/linux/if.h
deleted file mode 100644
index 9128570..0000000
--- a/include/linux/if.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the INET interface module.
- *
- * Version:	@(#)if.h	1.0.2	04/18/93
- *
- * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
- *		Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_H
-#define _LINUX_IF_H
-
-#define	IFNAMSIZ	16
-
-/* Standard interface flags (netdevice->flags). */
-#define	IFF_UP		0x1		/* interface is up		*/
-#define	IFF_BROADCAST	0x2		/* broadcast address valid	*/
-#define	IFF_DEBUG	0x4		/* turn on debugging		*/
-#define	IFF_LOOPBACK	0x8		/* is a loopback net		*/
-#define	IFF_POINTOPOINT	0x10		/* interface is has p-p link	*/
-#define	IFF_NOTRAILERS	0x20		/* avoid use of trailers	*/
-#define	IFF_RUNNING	0x40		/* interface running and carrier ok */
-#define	IFF_NOARP	0x80		/* no ARP protocol		*/
-#define	IFF_PROMISC	0x100		/* receive all packets		*/
-#define	IFF_ALLMULTI	0x200		/* receive all multicast packets*/
-
-#define IFF_MASTER	0x400		/* master of a load balancer 	*/
-#define IFF_SLAVE	0x800		/* slave of a load balancer	*/
-
-#define IFF_MULTICAST	0x1000		/* Supports multicast		*/
-
-#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_MASTER|IFF_SLAVE|IFF_RUNNING)
-
-#define IFF_PORTSEL	0x2000          /* can set media type		*/
-#define IFF_AUTOMEDIA	0x4000		/* auto media select active	*/
-#define IFF_DYNAMIC	0x8000		/* dialup device with changing addresses*/
-#define IFF_LOWER_UP	0x10000		/* driver signals L1 up		*/
-#define IFF_DORMANT	0x20000		/* driver signals dormant	*/
-
-/* Private (from user) interface flags (netdevice->priv_flags). */
-#define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
-#define IFF_EBRIDGE	0x2		/* Ethernet bridging device.	*/
-
-#define IF_GET_IFACE	0x0001		/* for querying only */
-#define IF_GET_PROTO	0x0002
-
-/* For definitions see hdlc.h */
-#define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/
-#define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/
-#define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/
-#define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/
-#define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/
-#define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/
-#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
-
-/* For definitions see hdlc.h */
-#define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/
-#define IF_PROTO_PPP	0x2001		/* PPP protocol			*/
-#define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/
-#define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/
-#define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/
-#define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/
-#define IF_PROTO_X25	0x2006		/* X.25				*/
-#define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/
-#define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/
-#define IF_PROTO_FR_ETH_PVC 0x200B
-#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
-
-
-/*
- *	Device mapping structure. I'd just gone off and designed a 
- *	beautiful scheme using only loadable modules with arguments
- *	for driver options and along come the PCMCIA people 8)
- *
- *	Ah well. The get() side of this is good for WDSETUP, and it'll
- *	be handy for debugging things. The set side is fine for now and
- *	being very small might be worth keeping for clean configuration.
- */
-
-struct ifmap 
-{
-	unsigned long mem_start;
-	unsigned long mem_end;
-	unsigned short base_addr; 
-	unsigned char irq;
-	unsigned char dma;
-	unsigned char port;
-	/* 3 bytes spare */
-};
-
-#endif /* _LINUX_IF_H */