3 %define mainstream_version 1.2.1
4 %define module_version_varname mainstream_version
7 #libvirt-RPMFLAGS := --without storage-disk --without storage-iscsi --without storage-scsi \
8 ## --without storage-fs --without storage-lvm \
9 ## --without polkit --without sasl --without audit --with capng --with udev \
10 ## --without netcf --without avahi --without sanlock \
11 ## --without xen --without qemu --without hyperv --without phyp --without esx \
13 %define _without_storage_disk true
14 %define _without_storage_iscsi true
15 %define _without_storage_fs true
16 %define _without_storage_lvm true
17 %define _without_polkit true
18 %define _without_sasl true
19 %define _without_audit true
20 #interface requires netcf
21 #%define _without_netcf true
22 %define _without_avahi true
23 %define _without_sanlock true
24 %define _without_xen true
25 %define _without_qemu true
26 %define _without_hyperv true
27 %define _without_phyp true
28 %define _without_esx true
29 %define _without_libxl true
30 %define _without_vbox true
33 #turn this off even on f18 as an attempt to get back /proc/meminfo
34 %define _without_fuse true
36 %define enable_autotools 1
38 # If neither fedora nor rhel was defined, try to guess them from %{dist}
39 %if !0%{?rhel} && !0%{?fedora}
40 %{expand:%(echo "%{?dist}" | \
41 sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')}
42 %{expand:%(echo "%{?dist}" | \
43 sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}
46 # Default to skipping autoreconf. Distros can change just this one line
47 # (or provide a command-line override) if they backport any patches that
48 # touch configure.ac or Makefile.am.
49 %{!?enable_autotools:%define enable_autotools 0}
51 # A client only build will create a libvirt.so only containing
52 # the generic RPC driver, and test driver and no libvirtd
53 # Default to a full server + client build, but with the possibility
54 # of a command-line or ~/.rpmmacros override for client-only.
55 %{!?client_only:%define client_only 0}
57 # Now turn off server build in certain cases
59 # RHEL-5 builds are client-only for s390, ppc
61 %ifnarch %{ix86} x86_64 ia64
66 # Disable all server side drivers if client only build requested
68 %define server_drivers 0
70 %define server_drivers 1
73 # Always build with dlopen'd modules
74 %define with_driver_modules 1
76 # Now set the defaults for all the important features, independent
77 # of any particular OS
79 # First the daemon itself
80 %define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
81 %define with_avahi 0%{!?_without_avahi:%{server_drivers}}
83 # Then the hypervisor drivers that run in libvirtd
84 %define with_xen 0%{!?_without_xen:%{server_drivers}}
85 %define with_qemu 0%{!?_without_qemu:%{server_drivers}}
86 %define with_lxc 0%{!?_without_lxc:%{server_drivers}}
87 %define with_uml 0%{!?_without_uml:%{server_drivers}}
88 %define with_libxl 0%{!?_without_libxl:%{server_drivers}}
89 %define with_vbox 0%{!?_without_vbox:%{server_drivers}}
91 %define with_qemu_tcg %{with_qemu}
92 # Change if we ever provide qemu-kvm binaries on non-x86 hosts
95 %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x %{arm}
97 %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
100 %define qemu_kvm_arches %{ix86} x86_64
103 %ifarch %{qemu_kvm_arches}
104 %define with_qemu_kvm %{with_qemu}
106 %define with_qemu_kvm 0
109 # Then the hypervisor drivers that run outside libvirtd, in libvirt.so
110 %define with_openvz 0%{!?_without_openvz:1}
111 %define with_vmware 0%{!?_without_vmware:1}
112 %define with_phyp 0%{!?_without_phyp:1}
113 %define with_esx 0%{!?_without_esx:1}
114 %define with_hyperv 0%{!?_without_hyperv:1}
115 %define with_xenapi 0%{!?_without_xenapi:1}
116 %define with_parallels 0%{!?_without_parallels:1}
118 # Then the secondary host drivers, which run inside libvirtd
119 %define with_interface 0%{!?_without_interface:%{server_drivers}}
120 %define with_network 0%{!?_without_network:%{server_drivers}}
121 %define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
122 %define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
123 %define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
124 %define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
125 %define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
126 %if 0%{?fedora} >= 16
127 %define with_storage_rbd 0%{!?_without_storage_rbd:%{server_drivers}}
129 %define with_storage_rbd 0
131 %if 0%{?fedora} >= 17
132 %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:%{server_drivers}}
134 %define with_storage_sheepdog 0
136 %if 0%{?fedora} >= 19
137 %define with_storage_gluster 0%{!?_without_storage_gluster:%{server_drivers}}
139 %define with_storage_gluster 0
141 %define with_numactl 0%{!?_without_numactl:%{server_drivers}}
142 %define with_selinux 0%{!?_without_selinux:%{server_drivers}}
144 # Just hardcode to off, since few people ever have apparmor RPMs installed
145 %define with_apparmor 0%{!?_without_apparmor:0}
147 # A few optional bits off by default, we enable later
148 %define with_polkit 0%{!?_without_polkit:0}
149 %define with_capng 0%{!?_without_capng:0}
150 %define with_fuse 0%{!?_without_fuse:0}
151 %define with_netcf 0%{!?_without_netcf:0}
152 %define with_udev 0%{!?_without_udev:0}
153 %define with_hal 0%{!?_without_hal:0}
154 %define with_yajl 0%{!?_without_yajl:0}
155 %define with_nwfilter 0%{!?_without_nwfilter:0}
156 %define with_libpcap 0%{!?_without_libpcap:0}
157 %define with_macvtap 0%{!?_without_macvtap:0}
158 %define with_libnl 0%{!?_without_libnl:0}
159 %define with_audit 0%{!?_without_audit:0}
160 %define with_dtrace 0%{!?_without_dtrace:0}
161 %define with_cgconfig 0%{!?_without_cgconfig:0}
162 %define with_sanlock 0%{!?_without_sanlock:0}
163 %define with_systemd 0%{!?_without_systemd:0}
164 %define with_numad 0%{!?_without_numad:0}
165 %define with_firewalld 0%{!?_without_firewalld:0}
166 %define with_libssh2 0%{!?_without_libssh2:0}
168 # Non-server/HV driver defaults which are always enabled
169 %define with_sasl 0%{!?_without_sasl:1}
172 # Finally set the OS / architecture specific special cases
174 # Xen is available only on i386 x86_64 ia64
175 %ifnarch %{ix86} x86_64 ia64
180 # vbox is available only on i386 x86_64
181 %ifnarch %{ix86} x86_64
185 # Numactl is not available on s390[x] and ARM
186 %ifarch s390 s390x %{arm}
187 %define with_numactl 0
190 # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
191 # VMWare, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
194 %define with_openvz 0
198 %define with_vmware 0
199 %define with_xenapi 0
201 %define with_hyperv 0
202 %define with_parallels 0
205 # Fedora 17 / RHEL-7 are first where we use systemd. Although earlier
206 # Fedora has systemd, libvirt still used sysvinit there.
207 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
208 %define with_systemd 1
211 # Fedora 18 / RHEL-7 are first where firewalld support is enabled
212 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
213 %define with_firewalld 1
216 # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
218 %define with_qemu_tcg 0
221 %define with_qemu_kvm 0
226 # RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
227 # on all archs. Other archs all have LXC available though
229 %define with_qemu_tcg 0
232 %define with_qemu_kvm 0
237 # Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
238 %if 0%{?fedora} && 0%{?fedora} < 16
244 # Fedora doesn't have new enough Xen for libxl until F18
245 %if 0%{?fedora} && 0%{?fedora} < 18
249 # PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
250 %if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
251 %define with_polkit 0%{!?_without_polkit:1}
254 # libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
255 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
256 %define with_capng 0%{!?_without_capng:1}
259 # fuse is used to provide virtualized /proc for LXC
260 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
261 %define with_fuse 0%{!?_without_fuse:1}
264 # netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
265 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
266 %define with_netcf 0%{!?_without_netcf:%{server_drivers}}
269 # udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
270 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
271 %define with_udev 0%{!?_without_udev:%{server_drivers}}
273 %define with_hal 0%{!?_without_hal:%{server_drivers}}
276 # interface requires netcf
277 %if ! 0%{?with_netcf}
278 %define with_interface 0
281 # Enable yajl library for JSON mode with QEMU
282 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
283 %define with_yajl 0%{!?_without_yajl:%{server_drivers}}
286 # Enable sanlock library for lock management with QEMU
287 # Sanlock is available only on i686 x86_64 for RHEL
288 %if 0%{?fedora} >= 16
289 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
292 %ifarch %{ix86} x86_64
293 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
298 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
302 # Enable libssh2 transport for new enough distros
303 %if 0%{?fedora} >= 17
304 %define with_libssh2 0%{!?_without_libssh2:1}
307 # Disable some drivers when building without libvirt daemon.
308 # The logic is the same as in configure.ac
309 %if ! %{with_libvirtd}
310 %define with_interface 0
311 %define with_network 0
317 %define with_storage_fs 0
318 %define with_storage_lvm 0
319 %define with_storage_iscsi 0
320 %define with_storage_mpath 0
321 %define with_storage_rbd 0
322 %define with_storage_sheepdog 0
323 %define with_storage_gluster 0
324 %define with_storage_disk 0
327 %if %{with_qemu} || %{with_lxc} || %{with_uml}
328 %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
329 # Enable libpcap library
330 %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
331 %define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
333 # numad is used to manage the CPU and memory placement dynamically,
334 # it's not available on s390[x] and ARM.
335 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
336 %ifnarch s390 s390x %{arm}
337 %define with_numad 0%{!?_without_numad:%{server_drivers}}
346 %if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
347 %define with_audit 0%{!?_without_audit:1}
350 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
351 %define with_dtrace 1
354 # Pull in cgroups config system
355 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
356 %if %{with_qemu} || %{with_lxc}
357 %define with_cgconfig 0%{!?_without_cgconfig:1}
361 %if %{with_udev} || %{with_hal}
362 %define with_nodedev 1
364 %define with_nodedev 0
367 %if %{with_storage_fs} || %{with_storage_mpath} || %{with_storage_iscsi} || %{with_storage_lvm} || %{with_storage_disk}
368 %define with_storage 1
370 %define with_storage 0
374 # Force QEMU to run as non-root
375 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
376 %define qemu_user qemu
377 %define qemu_group qemu
379 %define qemu_user root
380 %define qemu_group root
384 # The RHEL-5 Xen package has some feature backports. This
385 # flag is set to enable use of those special bits on RHEL-5
392 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
393 %define with_systemd_macros 1
395 %define with_systemd_macros 0
399 # RHEL releases provide stable tool chains and so it is safe to turn
400 # compiler warning into errors without being worried about frequent
401 # changes in reported warnings
403 %define enable_werror --enable-werror
407 Summary: Library providing a simple virtualization API
409 Version: %{mainstream_version}
412 Group: Development/Libraries
413 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
414 URL: http://libvirt.org/
416 %if %(echo %{version} | grep -o \\. | wc -l) == 3
417 %define mainturl stable_updates/
419 Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
422 Requires: libvirt-daemon = %{version}-%{release}
424 Requires: libvirt-daemon-config-network = %{version}-%{release}
427 Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
429 %if %{with_driver_modules}
431 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
434 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
437 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
440 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
443 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
446 Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
449 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
452 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
453 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
454 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
455 Requires: libvirt-daemon-driver-network = %{version}-%{release}
456 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
459 Requires: libvirt-client = %{version}-%{release}
461 # All build-time requirements. Run-time requirements are
462 # listed against each sub-RPM
463 %if 0%{?enable_autotools}
464 BuildRequires: autoconf
465 BuildRequires: automake
466 BuildRequires: gettext-devel
467 BuildRequires: libtool
468 BuildRequires: /usr/bin/pod2man
470 BuildRequires: python
472 BuildRequires: systemd-units
474 %if %{with_xen} || %{with_libxl}
475 BuildRequires: xen-devel
477 BuildRequires: libxml2-devel
478 BuildRequires: xhtml1-dtds
479 BuildRequires: libxslt
480 BuildRequires: readline-devel
481 BuildRequires: ncurses-devel
482 BuildRequires: gettext
483 BuildRequires: libtasn1-devel
484 %if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 19)
485 BuildRequires: libgcrypt-devel
487 BuildRequires: gnutls-devel
488 BuildRequires: libattr-devel
490 # For pool-build probing for existing pools
491 BuildRequires: libblkid-devel >= 2.17
493 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
494 # for augparse, optionally used in testing
495 BuildRequires: augeas
498 BuildRequires: hal-devel
501 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
502 BuildRequires: systemd-devel >= 185
504 BuildRequires: libudev-devel >= 145
506 BuildRequires: libpciaccess-devel >= 0.10.9
509 BuildRequires: yajl-devel
512 # make sure libvirt is built with new enough sanlock on
513 # distros that have it; required for on_lockfailure
514 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
515 BuildRequires: sanlock-devel >= 2.4
517 BuildRequires: sanlock-devel >= 1.8
521 BuildRequires: libpcap-devel
524 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
525 BuildRequires: libnl3-devel
527 BuildRequires: libnl-devel
531 BuildRequires: avahi-devel
534 BuildRequires: libselinux-devel
537 BuildRequires: libapparmor-devel
540 BuildRequires: dnsmasq >= 2.41
541 BuildRequires: iptables
542 BuildRequires: iptables-ipv6
546 BuildRequires: ebtables
548 BuildRequires: module-init-tools
550 BuildRequires: cyrus-sasl-devel
553 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
554 BuildRequires: polkit-devel >= 0.93
556 BuildRequires: PolicyKit-devel >= 0.6
559 %if %{with_storage_fs}
560 # For mount/umount in FS driver
561 BuildRequires: util-linux
565 BuildRequires: /usr/bin/qemu-img
569 BuildRequires: /usr/sbin/qcow-create
572 %if %{with_storage_lvm}
576 %if %{with_storage_iscsi}
578 BuildRequires: iscsi-initiator-utils
580 %if %{with_storage_disk}
582 BuildRequires: parted-devel
584 # Broken RHEL-5 parted RPM is missing a dep
585 BuildRequires: e2fsprogs-devel
588 %if %{with_storage_mpath}
589 # For Multipath support
591 # Broken RHEL-5 packaging has header files in main RPM :-(
592 BuildRequires: device-mapper
594 BuildRequires: device-mapper-devel
596 %if %{with_storage_rbd}
597 BuildRequires: ceph-devel
600 %if %{with_storage_gluster}
601 BuildRequires: glusterfs-api-devel >= 3.4.1
602 BuildRequires: glusterfs-devel >= 3.4.1
605 # For QEMU/LXC numa info
606 BuildRequires: numactl-devel
609 BuildRequires: libcap-ng-devel >= 0.5.0
612 BuildRequires: fuse-devel >= 2.8.6
614 %if %{with_phyp} || %{with_libssh2}
615 BuildRequires: libssh2-devel >= 1.3.0
619 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
620 BuildRequires: netcf-devel >= 0.2.2
622 %if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
623 BuildRequires: netcf-devel >= 0.1.8
625 BuildRequires: netcf-devel >= 0.1.4
630 %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
631 BuildRequires: libcurl-devel
633 BuildRequires: curl-devel
637 BuildRequires: libwsman-devel >= 2.2.3
640 BuildRequires: audit-libs-devel
643 # we need /usr/sbin/dtrace
644 BuildRequires: systemtap-sdt-devel
647 %if %{with_storage_fs}
648 # For mount/umount in FS driver
649 BuildRequires: util-linux
650 # For showmount in FS driver (netfs discovery)
651 BuildRequires: nfs-utils
654 %if %{with_firewalld}
655 # Communication with the firewall daemon uses DBus
656 BuildRequires: dbus-devel
659 # Fedora build root suckage
662 # For storage wiping with different algorithms
669 Provides: bundled(gnulib)
672 Libvirt is a C toolkit to interact with the virtualization capabilities
673 of recent versions of Linux (and other OSes). The main package includes
674 the libvirtd server exporting the virtualization support.
677 Summary: API reference and website documentation
678 Group: Development/Libraries
681 Includes the API reference for the libvirt C library, and a complete
682 copy of the libvirt.org website documentation.
686 Summary: Server side daemon and supporting files for libvirt library
687 Group: Development/Libraries
689 # All runtime requirements for the libvirt package (runtime requrements
690 # for subpackages are listed later in those subpackages)
692 # The client side, i.e. shared libs and virsh are in a subpackage
693 Requires: %{name}-client = %{version}-%{release}
695 # for modprobe of pci devices
696 Requires: module-init-tools
697 # for /sbin/ip & /sbin/tc
707 %if 0%{?fedora} >= 12 || 0%{?rhel} >=6
708 Requires: polkit >= 0.93
710 Requires: PolicyKit >= 0.6
716 %ifarch %{ix86} x86_64 ia64
717 # For virConnectGetSysinfo
720 # For service management
722 Requires(post): systemd-units
723 Requires(post): systemd-sysv
724 Requires(preun): systemd-units
725 Requires(postun): systemd-units
730 # libvirtd depends on 'messagebus' service
732 # For uid creation during pre
733 Requires(pre): shadow-utils
736 Server side daemon required to manage the virtualization capabilities
737 of recent versions of Linux. Requires a hypervisor specific sub-RPM
738 for specific drivers.
741 %package daemon-config-network
742 Summary: Default configuration files for the libvirtd daemon
743 Group: Development/Libraries
745 Requires: libvirt-daemon = %{version}-%{release}
747 %description daemon-config-network
748 Default configuration files for setting up NAT based networking
752 %package daemon-config-nwfilter
753 Summary: Network filter configuration files for the libvirtd daemon
754 Group: Development/Libraries
756 Requires: libvirt-daemon = %{version}-%{release}
758 %description daemon-config-nwfilter
759 Network filter configuration files for cleaning guest traffic
762 %if %{with_driver_modules}
764 %package daemon-driver-network
765 Summary: Network driver plugin for the libvirtd daemon
766 Group: Development/Libraries
767 Requires: libvirt-daemon = %{version}-%{release}
768 Requires: dnsmasq >= 2.41
771 Requires: iptables-ipv6
773 %description daemon-driver-network
774 The network driver plugin for the libvirtd daemon, providing
775 an implementation of the virtual network APIs using the Linux
781 %package daemon-driver-nwfilter
782 Summary: Nwfilter driver plugin for the libvirtd daemon
783 Group: Development/Libraries
784 Requires: libvirt-daemon = %{version}-%{release}
786 Requires: iptables-ipv6
789 %description daemon-driver-nwfilter
790 The nwfilter driver plugin for the libvirtd daemon, providing
791 an implementation of the firewall APIs using the ebtables,
792 iptables and ip6tables capabilities
797 %package daemon-driver-nodedev
798 Summary: Nodedev driver plugin for the libvirtd daemon
799 Group: Development/Libraries
800 Requires: libvirt-daemon = %{version}-%{release}
801 # needed for device enumeration
806 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
807 Requires: systemd >= 185
809 Requires: udev >= 145
813 %description daemon-driver-nodedev
814 The nodedev driver plugin for the libvirtd daemon, providing
815 an implementation of the node device APIs using the udev
820 %if %{with_interface}
821 %package daemon-driver-interface
822 Summary: Interface driver plugin for the libvirtd daemon
823 Group: Development/Libraries
824 Requires: libvirt-daemon = %{version}-%{release}
825 %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)
826 Requires: netcf-libs >= 0.2.2
829 %description daemon-driver-interface
830 The interface driver plugin for the libvirtd daemon, providing
831 an implementation of the network interface APIs using the
836 %package daemon-driver-secret
837 Summary: Secret driver plugin for the libvirtd daemon
838 Group: Development/Libraries
839 Requires: libvirt-daemon = %{version}-%{release}
841 %description daemon-driver-secret
842 The secret driver plugin for the libvirtd daemon, providing
843 an implementation of the secret key APIs.
847 %package daemon-driver-storage
848 Summary: Storage driver plugin for the libvirtd daemon
849 Group: Development/Libraries
850 Requires: libvirt-daemon = %{version}-%{release}
851 %if %{with_storage_fs}
856 %if 0%{?fedora} >= 11
857 Requires: glusterfs-client >= 2.0.1
860 %if %{with_storage_lvm}
864 %if %{with_storage_iscsi}
866 Requires: iscsi-initiator-utils
868 %if %{with_storage_disk}
871 Requires: device-mapper
873 %if %{with_storage_mpath}
874 # For multipath support
875 Requires: device-mapper
877 %if %{with_storage_sheepdog}
878 # For Sheepdog support
883 Requires: /usr/bin/qemu-img
887 Requires: /usr/sbin/qcow-create
891 %description daemon-driver-storage
892 The storage driver plugin for the libvirtd daemon, providing
893 an implementation of the storage APIs using LVM, iSCSI,
899 %package daemon-driver-qemu
900 Summary: Qemu driver plugin for the libvirtd daemon
901 Group: Development/Libraries
902 Requires: libvirt-daemon = %{version}-%{release}
903 # There really is a hard cross-driver dependency here
904 Requires: libvirt-daemon-driver-network = %{version}-%{release}
905 Requires: /usr/bin/qemu-img
906 # For image compression
912 %description daemon-driver-qemu
913 The qemu driver plugin for the libvirtd daemon, providing
914 an implementation of the hypervisor driver APIs using
920 %package daemon-driver-lxc
921 Summary: LXC driver plugin for the libvirtd daemon
922 Group: Development/Libraries
923 Requires: libvirt-daemon = %{version}-%{release}
924 # There really is a hard cross-driver dependency here
925 Requires: libvirt-daemon-driver-network = %{version}-%{release}
927 %description daemon-driver-lxc
928 The LXC driver plugin for the libvirtd daemon, providing
929 an implementation of the hypervisor driver APIs using
935 %package daemon-driver-uml
936 Summary: Uml driver plugin for the libvirtd daemon
937 Group: Development/Libraries
938 Requires: libvirt-daemon = %{version}-%{release}
940 %description daemon-driver-uml
941 The UML driver plugin for the libvirtd daemon, providing
942 an implementation of the hypervisor driver APIs using
948 %package daemon-driver-xen
949 Summary: Xen driver plugin for the libvirtd daemon
950 Group: Development/Libraries
951 Requires: libvirt-daemon = %{version}-%{release}
953 %description daemon-driver-xen
954 The Xen driver plugin for the libvirtd daemon, providing
955 an implementation of the hypervisor driver APIs using
961 %package daemon-driver-vbox
962 Summary: VirtualBox driver plugin for the libvirtd daemon
963 Group: Development/Libraries
964 Requires: libvirt-daemon = %{version}-%{release}
966 %description daemon-driver-vbox
967 The vbox driver plugin for the libvirtd daemon, providing
968 an implementation of the hypervisor driver APIs using
974 %package daemon-driver-libxl
975 Summary: Libxl driver plugin for the libvirtd daemon
976 Group: Development/Libraries
977 Requires: libvirt-daemon = %{version}-%{release}
979 %description daemon-driver-libxl
980 The Libxl driver plugin for the libvirtd daemon, providing
981 an implementation of the hypervisor driver APIs using
984 %endif # %{with_driver_modules}
990 Summary: Server side daemon & driver required to run QEMU guests
991 Group: Development/Libraries
993 Requires: libvirt-daemon = %{version}-%{release}
994 %if %{with_driver_modules}
995 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
996 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
997 Requires: libvirt-daemon-driver-network = %{version}-%{release}
998 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
999 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1000 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1001 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1005 %description daemon-qemu
1006 Server side daemon and driver required to manage the virtualization
1007 capabilities of the QEMU TCG emulators
1011 %if %{with_qemu_kvm}
1013 Summary: Server side daemon & driver required to run KVM guests
1014 Group: Development/Libraries
1016 Requires: libvirt-daemon = %{version}-%{release}
1017 %if %{with_driver_modules}
1018 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
1019 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1020 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1021 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1022 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1023 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1024 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1028 %description daemon-kvm
1029 Server side daemon and driver required to manage the virtualization
1030 capabilities of the KVM hypervisor
1036 Summary: Server side daemon & driver required to run LXC guests
1037 Group: Development/Libraries
1039 Requires: libvirt-daemon = %{version}-%{release}
1040 %if %{with_driver_modules}
1041 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
1042 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1043 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1044 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1045 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1046 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1047 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1050 %description daemon-lxc
1051 Server side daemon and driver required to manage the virtualization
1058 Summary: Server side daemon & driver required to run UML guests
1059 Group: Development/Libraries
1061 Requires: libvirt-daemon = %{version}-%{release}
1062 %if %{with_driver_modules}
1063 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
1064 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1065 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1066 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1067 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1068 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1069 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1071 # There are no UML kernel RPMs in Fedora/RHEL to depend on.
1073 %description daemon-uml
1074 Server side daemon and driver required to manage the virtualization
1079 %if %{with_xen} || %{with_libxl}
1081 Summary: Server side daemon & driver required to run XEN guests
1082 Group: Development/Libraries
1084 Requires: libvirt-daemon = %{version}-%{release}
1085 %if %{with_driver_modules}
1087 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
1090 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
1092 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1093 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1094 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1095 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1096 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1097 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1101 %description daemon-xen
1102 Server side daemon and driver required to manage the virtualization
1107 %package daemon-vbox
1108 Summary: Server side daemon & driver required to run VirtualBox guests
1109 Group: Development/Libraries
1111 Requires: libvirt-daemon = %{version}-%{release}
1112 %if %{with_driver_modules}
1113 Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
1114 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1115 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1116 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1117 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1118 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1119 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1122 %description daemon-vbox
1123 Server side daemon and driver required to manage the virtualization
1124 capabilities of VirtualBox
1126 %endif # %{with_libvirtd}
1129 Summary: Client side library and utilities of the libvirt library
1130 Group: Development/Libraries
1133 # So remote clients can access libvirt over SSH tunnel
1134 # (client invokes 'nc' against the UNIX socket on the server)
1136 # Needed by /usr/libexec/libvirt-guests.sh script.
1138 # Needed by virt-pki-validate script.
1139 Requires: gnutls-utils
1140 # Needed for probing the power management features of the host.
1143 Requires: cyrus-sasl
1144 # Not technically required, but makes 'out-of-box' config
1145 # work correctly & doesn't have onerous dependencies
1146 Requires: cyrus-sasl-md5
1150 Shared libraries and client binaries needed to access to the
1151 virtualization capabilities of recent versions of Linux (and other OSes).
1154 %package login-shell
1155 Summary: Login shell for connecting users to an LXC container
1156 Group: Development/Libraries
1157 Requires: %{name}-client = %{version}-%{release}
1159 %description login-shell
1160 Provides the set-uid virt-login-shell binary that is used to
1161 connect a user to an LXC container when they login, by switching
1166 Summary: Libraries, includes, etc. to compile with the libvirt library
1167 Group: Development/Libraries
1168 Requires: %{name}-client = %{version}-%{release}
1169 Requires: %{name}-docs = %{version}-%{release}
1173 Include header files & development libraries for the libvirt C library.
1176 %package lock-sanlock
1177 Summary: Sanlock lock manager plugin for QEMU driver
1178 Group: Development/Libraries
1179 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
1180 Requires: sanlock >= 2.4
1182 Requires: sanlock >= 1.8
1184 #for virt-sanlock-cleanup require augeas
1186 Requires: %{name}-daemon = %{version}-%{release}
1187 Requires: %{name}-client = %{version}-%{release}
1189 %description lock-sanlock
1190 Includes the Sanlock lock manager plugin for the QEMU
1199 %define _without_xen --without-xen
1203 %define _without_qemu --without-qemu
1206 %if ! %{with_openvz}
1207 %define _without_openvz --without-openvz
1211 %define _without_lxc --without-lxc
1215 %define _without_vbox --without-vbox
1218 %if ! %{with_xenapi}
1219 %define _without_xenapi --without-xenapi
1223 %define _without_libxl --without-libxl
1227 %define _without_sasl --without-sasl
1231 %define _without_avahi --without-avahi
1235 %define _without_phyp --without-phyp
1239 %define _without_esx --without-esx
1242 %if ! %{with_hyperv}
1243 %define _without_hyperv --without-hyperv
1246 %if ! %{with_vmware}
1247 %define _without_vmware --without-vmware
1250 %if ! %{with_parallels}
1251 %define _without_parallels --without-parallels
1254 %if ! %{with_polkit}
1255 %define _without_polkit --without-polkit
1258 %if ! %{with_libvirtd}
1259 %define _without_libvirtd --without-libvirtd
1263 %define _without_uml --without-uml
1267 %define _with_rhel5_api --with-rhel5-api
1270 %if ! %{with_interface}
1271 %define _without_interface --without-interface
1274 %if ! %{with_network}
1275 %define _without_network --without-network
1278 %if ! %{with_storage_fs}
1279 %define _without_storage_fs --without-storage-fs
1282 %if ! %{with_storage_lvm}
1283 %define _without_storage_lvm --without-storage-lvm
1286 %if ! %{with_storage_iscsi}
1287 %define _without_storage_iscsi --without-storage-iscsi
1290 %if ! %{with_storage_disk}
1291 %define _without_storage_disk --without-storage-disk
1294 %if ! %{with_storage_mpath}
1295 %define _without_storage_mpath --without-storage-mpath
1298 %if ! %{with_storage_rbd}
1299 %define _without_storage_rbd --without-storage-rbd
1302 %if ! %{with_storage_sheepdog}
1303 %define _without_storage_sheepdog --without-storage-sheepdog
1306 %if ! %{with_storage_gluster}
1307 %define _without_storage_gluster --without-storage-gluster
1310 %if ! %{with_numactl}
1311 %define _without_numactl --without-numactl
1315 %define _without_numad --without-numad
1319 %define _without_capng --without-capng
1323 %define _without_fuse --without-fuse
1327 %define _without_netcf --without-netcf
1330 %if ! %{with_selinux}
1331 %define _without_selinux --without-selinux
1334 %if ! %{with_apparmor}
1335 %define _without_apparmor --without-apparmor
1339 %define _without_hal --without-hal
1343 %define _without_udev --without-udev
1347 %define _without_yajl --without-yajl
1350 %if ! %{with_sanlock}
1351 %define _without_sanlock --without-sanlock
1354 %if ! %{with_libpcap}
1355 %define _without_libpcap --without-libpcap
1358 %if ! %{with_macvtap}
1359 %define _without_macvtap --without-macvtap
1363 %define _without_audit --without-audit
1366 %if ! %{with_dtrace}
1367 %define _without_dtrace --without-dtrace
1370 %if ! %{with_driver_modules}
1371 %define _without_driver_modules --without-driver-modules
1374 %if %{with_firewalld}
1375 %define _with_firewalld --with-firewalld
1378 %define when %(date +"%%F-%%T")
1379 %define where %(hostname)
1380 %define who %{?packager}%{!?packager:Unknown}
1381 %define with_packager --with-packager="%{who}, %{when}, %{where}"
1382 %define with_packager_version --with-packager-version="%{release}"
1385 %define init_scripts --with-init_script=systemd
1387 %define init_scripts --with-init_script=redhat
1391 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
1392 %define with_selinux_mount --with-selinux-mount="/sys/fs/selinux"
1394 %define with_selinux_mount --with-selinux-mount="/selinux"
1398 # place macros above and build commands below this comment
1400 %if 0%{?enable_autotools}
1404 %configure %{?_without_xen} \
1406 %{?_without_openvz} \
1409 %{?_without_libxl} \
1410 %{?_without_xenapi} \
1412 %{?_without_avahi} \
1413 %{?_without_polkit} \
1414 %{?_without_libvirtd} \
1418 %{?_without_hyperv} \
1419 %{?_without_vmware} \
1420 %{?_without_parallels} \
1421 %{?_without_interface} \
1422 %{?_without_network} \
1423 %{?_with_rhel5_api} \
1424 %{?_without_storage_fs} \
1425 %{?_without_storage_lvm} \
1426 %{?_without_storage_iscsi} \
1427 %{?_without_storage_disk} \
1428 %{?_without_storage_mpath} \
1429 %{?_without_storage_rbd} \
1430 %{?_without_storage_sheepdog} \
1431 %{?_without_storage_gluster} \
1432 %{?_without_numactl} \
1433 %{?_without_numad} \
1434 %{?_without_capng} \
1436 %{?_without_netcf} \
1437 %{?_without_selinux} \
1438 %{?_with_selinux_mount} \
1439 %{?_without_apparmor} \
1443 %{?_without_sanlock} \
1444 %{?_without_libpcap} \
1445 %{?_without_macvtap} \
1446 %{?_without_audit} \
1447 %{?_without_dtrace} \
1448 %{?_without_driver_modules} \
1449 %{?_with_firewalld} \
1451 %{with_packager_version} \
1452 --with-qemu-user=%{qemu_user} \
1453 --with-qemu-group=%{qemu_group} \
1455 --enable-expensive-tests \
1457 make %{?_smp_mflags}
1463 # Avoid using makeinstall macro as it changes prefixes rather than setting
1464 # DESTDIR. Newer make_install macro would be better but it's not available
1465 # on RHEL 5, thus we need to expand it here.
1466 make install DESTDIR=%{?buildroot} SYSTEMD_UNIT_DIR=%{_unitdir}
1468 for i in object-events dominfo domsuspend hellolibvirt openauth xml/nwfilter systemtap
1470 (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
1472 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
1473 rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
1474 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
1475 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
1476 %if %{with_driver_modules}
1477 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
1478 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
1482 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
1483 # We don't want to install /etc/libvirt/qemu/networks in the main %files list
1484 # because if the admin wants to delete the default network completely, we don't
1485 # want to end up re-incarnating it on every RPM upgrade.
1486 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
1487 cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
1488 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1489 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1490 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1491 # Strip auto-generated UUID - we need it generated per-install
1492 sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1494 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1495 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1498 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
1499 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1503 %if ! %{with_sanlock}
1504 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
1505 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1509 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
1510 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1514 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
1515 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
1518 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
1519 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
1522 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
1525 # Copied into libvirt-docs subpackage eventually
1526 mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} libvirt-docs
1529 %ifarch %{power64} s390x x86_64 ia64 alpha sparc64
1530 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
1531 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
1532 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
1533 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
1537 %if 0%{?fedora} < 14 && 0%{?rhel} < 6
1538 rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
1547 # These tests don't current work in a mock build root
1548 for i in nodeinfotest seclabeltest
1551 printf 'int main(void) { return 0; }' > $i.c
1552 printf '#!/bin/sh\nexit 0\n' > $i
1555 if ! make check VIR_TEST_DEBUG=1
1557 cat test-suite.log || true
1561 %if %{with_libvirtd}
1562 %if ! %{with_driver_modules}
1565 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1566 # We want soft static allocation of well-known ids, as disk images
1567 # are commonly shared across NFS mounts by id rather than name; see
1568 # https://fedoraproject.org/wiki/Packaging:UsersAndGroups
1569 getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
1570 getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
1571 if ! getent passwd qemu >/dev/null; then
1572 if ! getent passwd 107 >/dev/null; then
1573 useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
1575 useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
1586 # All newly defined networks will have a mac address for the bridge
1587 # auto-generated, but networks already existing at the time of upgrade
1588 # will not. We need to go through all the network configs, look for
1589 # those that don't have a mac address, and add one.
1591 network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \
1592 grep -L "mac address" *.xml; \
1593 cd %{_sysconfdir}/libvirt/qemu/networks && \
1594 grep -L "mac address" *.xml) 2>/dev/null \
1597 for file in $network_files
1599 # each file exists in either the config or state directory (or both) and
1600 # does not have a mac address specified in either. We add the same mac
1601 # address to both files (or just one, if the other isn't there)
1603 mac4=`printf '%X' $(($RANDOM % 256))`
1604 mac5=`printf '%X' $(($RANDOM % 256))`
1605 mac6=`printf '%X' $(($RANDOM % 256))`
1606 for dir in %{_localstatedir}/lib/libvirt/network \
1607 %{_sysconfdir}/libvirt/qemu/networks
1609 if test -f $dir/$file
1612 "s|\(<bridge.*$\)|\0\n <mac address='52:54:00:$mac4:$mac5:$mac6'/>|" \
1616 echo "failed to add <mac address='52:54:00:$mac4:$mac5:$mac6'/>" \
1618 mv -f $dir/$file.orig $dir/$file
1620 rm -f $dir/$file.orig
1628 %if %{with_systemd_macros}
1629 %systemd_post virtlockd.socket libvirtd.service
1631 if [ $1 -eq 1 ] ; then
1632 # Initial installation
1633 /bin/systemctl enable virtlockd.socket libvirtd.service >/dev/null 2>&1 || :
1637 %if %{with_cgconfig}
1638 # Starting with Fedora 16/RHEL-7, systemd automounts all cgroups,
1639 # and cgconfig is no longer a necessary service.
1640 %if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 16)
1641 if [ "$1" -eq "1" ]; then
1642 /sbin/chkconfig cgconfig on
1647 /sbin/chkconfig --add libvirtd
1648 /sbin/chkconfig --add virtlockd
1653 %if %{with_systemd_macros}
1654 %systemd_preun libvirtd.service virtlockd.socket virtlockd.service
1656 if [ $1 -eq 0 ] ; then
1657 # Package removal, not upgrade
1658 /bin/systemctl --no-reload disable libvirtd.service virtlockd.socket virtlockd.service > /dev/null 2>&1 || :
1659 /bin/systemctl stop libvirtd.service virtlockd.socket virtlockd.service > /dev/null 2>&1 || :
1664 /sbin/service libvirtd stop 1>/dev/null 2>&1
1665 /sbin/chkconfig --del libvirtd
1666 /sbin/service virtlockd stop 1>/dev/null 2>&1
1667 /sbin/chkconfig --del virtlockd
1673 /bin/systemctl daemon-reload >/dev/null 2>&1 || :
1674 if [ $1 -ge 1 ] ; then
1675 /bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || :
1676 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1679 if [ $1 -ge 1 ]; then
1680 /sbin/service virtlockd reload > /dev/null 2>&1 || :
1681 /sbin/service libvirtd condrestart > /dev/null 2>&1
1687 %triggerpostun daemon -- libvirt-daemon < 1.2.1
1688 if [ "$1" -ge "1" ]; then
1689 /sbin/service virtlockd reload > /dev/null 2>&1 || :
1690 /sbin/service libvirtd condrestart > /dev/null 2>&1
1695 %post daemon-config-network
1696 if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
1697 UUID=`/usr/bin/uuidgen`
1698 sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
1699 < %{_datadir}/libvirt/networks/default.xml \
1700 > %{_sysconfdir}/libvirt/qemu/networks/default.xml
1701 ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1706 %triggerun -- libvirt < 0.9.4
1707 %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
1709 # If the package is allowed to autostart:
1710 /bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||:
1712 # Run these because the SysV package being removed won't do them
1713 /sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
1714 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1717 %if %{with_driver_modules}
1719 %pre daemon-driver-qemu
1720 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1721 # We want soft static allocation of well-known ids, as disk images
1722 # are commonly shared across NFS mounts by id rather than name; see
1723 # https://fedoraproject.org/wiki/Packaging:UsersAndGroups
1724 getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
1725 getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
1726 if ! getent passwd qemu >/dev/null; then
1727 if ! getent passwd 107 >/dev/null; then
1728 useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
1730 useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
1737 %endif # %{with_libvirtd}
1742 %if %{with_systemd_macros}
1743 %systemd_preun libvirt-guests.service
1747 /sbin/chkconfig --del libvirt-guests
1748 rm -f /var/lib/libvirt/libvirt-guests
1756 %if %{with_systemd_macros}
1757 %systemd_post libvirt-guests.service
1760 /sbin/chkconfig --add libvirt-guests
1767 %if %{with_systemd_macros}
1768 %systemd_postun libvirt-guests.service
1770 %triggerun client -- libvirt < 0.9.4
1771 %{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
1773 # If the package is allowed to autostart:
1774 /bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||:
1776 # Run this because the SysV package being removed won't do them
1777 /sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || :
1782 if getent group sanlock > /dev/null ; then
1783 chmod 0770 %{_localstatedir}/lib/libvirt/sanlock
1784 chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock
1790 getent group virtlogin >/dev/null || groupadd -r virtlogin
1795 %defattr(-, root, root)
1798 %defattr(-, root, root)
1799 %doc AUTHORS ChangeLog.gz NEWS README TODO libvirt-docs/*
1802 %dir %{_datadir}/gtk-doc/html/libvirt/
1803 %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
1804 %doc %{_datadir}/gtk-doc/html/libvirt/*.html
1805 %doc %{_datadir}/gtk-doc/html/libvirt/*.png
1806 %doc %{_datadir}/gtk-doc/html/libvirt/*.css
1808 %if %{with_libvirtd}
1810 %defattr(-, root, root)
1812 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
1814 %if %{with_nwfilter}
1815 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
1819 %{_unitdir}/libvirtd.service
1820 %{_unitdir}/virtlockd.service
1821 %{_unitdir}/virtlockd.socket
1823 %{_sysconfdir}/rc.d/init.d/libvirtd
1824 %{_sysconfdir}/rc.d/init.d/virtlockd
1826 %doc daemon/libvirtd.upstart
1827 %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
1828 %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
1829 %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
1830 %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
1831 %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
1832 %config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
1835 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
1836 %dir %{_datadir}/libvirt/
1838 %ghost %dir %{_localstatedir}/run/libvirt/
1840 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
1841 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
1842 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
1843 %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
1846 %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
1847 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
1849 %{_datadir}/augeas/lenses/libvirtd.aug
1850 %{_datadir}/augeas/lenses/tests/test_libvirtd.aug
1851 %{_datadir}/augeas/lenses/virtlockd.aug
1852 %{_datadir}/augeas/lenses/tests/test_virtlockd.aug
1853 %{_datadir}/augeas/lenses/libvirt_lockd.aug
1854 %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
1857 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1858 %{_datadir}/polkit-1/actions/org.libvirt.unix.policy
1859 %{_datadir}/polkit-1/actions/org.libvirt.api.policy
1861 %{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
1865 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
1867 %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
1869 %if %{with_apparmor}
1870 %attr(0755, root, root) %{_libexecdir}/virt-aa-helper
1873 %attr(0755, root, root) %{_sbindir}/libvirtd
1874 %attr(0755, root, root) %{_sbindir}/virtlockd
1876 %{_mandir}/man8/libvirtd.8*
1877 %{_mandir}/man8/virtlockd.8*
1879 %if ! %{with_driver_modules}
1881 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
1882 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
1883 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
1884 %dir %{_datadir}/libvirt/networks/
1885 %{_datadir}/libvirt/networks/default.xml
1886 %ghost %dir %{_localstatedir}/run/libvirt/network/
1887 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
1888 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
1890 %if %{with_storage_disk}
1891 %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
1894 %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
1895 %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
1896 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
1897 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
1898 %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
1899 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
1900 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/
1901 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/
1902 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
1903 %{_datadir}/augeas/lenses/libvirtd_qemu.aug
1904 %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1907 %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
1908 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
1909 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
1910 %ghost %dir %{_localstatedir}/run/libvirt/lxc/
1911 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
1912 %{_datadir}/augeas/lenses/libvirtd_lxc.aug
1913 %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1914 %attr(0755, root, root) %{_libexecdir}/libvirt_lxc
1917 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
1918 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
1919 %ghost %dir %{_localstatedir}/run/libvirt/uml/
1920 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
1923 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
1924 %ghost %dir %{_localstatedir}/run/libvirt/libxl/
1925 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
1928 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
1930 %endif # ! %{with_driver_modules}
1933 %files daemon-config-network
1934 %defattr(-, root, root)
1937 %if %{with_nwfilter}
1938 %files daemon-config-nwfilter
1939 %defattr(-, root, root)
1940 %{_sysconfdir}/libvirt/nwfilter/*.xml
1943 %if %{with_driver_modules}
1944 %if %{with_interface}
1945 %files daemon-driver-interface
1946 %defattr(-, root, root)
1947 %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
1951 %files daemon-driver-network
1952 %defattr(-, root, root)
1953 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
1954 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
1955 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
1956 %dir %{_datadir}/libvirt/networks/
1957 %{_datadir}/libvirt/networks/default.xml
1958 %ghost %dir %{_localstatedir}/run/libvirt/network/
1959 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
1960 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
1961 %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
1965 %files daemon-driver-nodedev
1966 %defattr(-, root, root)
1967 %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
1970 %if %{with_nwfilter}
1971 %files daemon-driver-nwfilter
1972 %defattr(-, root, root)
1973 %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
1976 %files daemon-driver-secret
1977 %defattr(-, root, root)
1978 %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
1981 %files daemon-driver-storage
1982 %defattr(-, root, root)
1983 %if %{with_storage_disk}
1984 %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
1986 %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
1990 %files daemon-driver-qemu
1991 %defattr(-, root, root)
1992 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
1993 %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
1994 %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
1995 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
1996 %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
1997 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
1998 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/
1999 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/
2000 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
2001 %{_datadir}/augeas/lenses/libvirtd_qemu.aug
2002 %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
2003 %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
2007 %files daemon-driver-lxc
2008 %defattr(-, root, root)
2009 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
2010 %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
2011 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
2012 %ghost %dir %{_localstatedir}/run/libvirt/lxc/
2013 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
2014 %{_datadir}/augeas/lenses/libvirtd_lxc.aug
2015 %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
2016 %attr(0755, root, root) %{_libexecdir}/libvirt_lxc
2017 %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
2021 %files daemon-driver-uml
2022 %defattr(-, root, root)
2023 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
2024 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
2025 %ghost %dir %{_localstatedir}/run/libvirt/uml/
2026 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
2027 %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so
2031 %files daemon-driver-xen
2032 %defattr(-, root, root)
2033 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
2034 %{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so
2038 %files daemon-driver-libxl
2039 %defattr(-, root, root)
2040 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
2041 %ghost %dir %{_localstatedir}/run/libvirt/libxl/
2042 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
2043 %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
2047 %files daemon-driver-vbox
2048 %defattr(-, root, root)
2049 %{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so
2051 %endif # %{with_driver_modules}
2053 %if %{with_qemu_tcg}
2055 %defattr(-, root, root)
2058 %if %{with_qemu_kvm}
2060 %defattr(-, root, root)
2065 %defattr(-, root, root)
2070 %defattr(-, root, root)
2073 %if %{with_xen} || %{with_libxl}
2075 %defattr(-, root, root)
2080 %defattr(-, root, root)
2082 %endif # %{with_libvirtd}
2086 %defattr(-, root, root)
2088 %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
2090 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
2091 %{_datadir}/augeas/lenses/libvirt_sanlock.aug
2092 %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
2093 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock
2094 %{_sbindir}/virt-sanlock-cleanup
2095 %{_mandir}/man8/virt-sanlock-cleanup.8*
2096 %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
2099 %files client -f %{name}.lang
2100 %defattr(-, root, root)
2101 %doc COPYING COPYING.LESSER
2103 %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
2104 %{_mandir}/man1/virsh.1*
2105 %{_mandir}/man1/virt-xml-validate.1*
2106 %{_mandir}/man1/virt-pki-validate.1*
2107 %{_mandir}/man1/virt-host-validate.1*
2109 %{_bindir}/virt-xml-validate
2110 %{_bindir}/virt-pki-validate
2111 %{_bindir}/virt-host-validate
2112 %{_libdir}/lib*.so.*
2115 %{_datadir}/systemtap/tapset/libvirt_probes*.stp
2116 %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
2117 %{_datadir}/systemtap/tapset/libvirt_functions.stp
2120 %dir %{_datadir}/libvirt/
2121 %dir %{_datadir}/libvirt/schemas/
2123 %{_datadir}/libvirt/schemas/basictypes.rng
2124 %{_datadir}/libvirt/schemas/capability.rng
2125 %{_datadir}/libvirt/schemas/domain.rng
2126 %{_datadir}/libvirt/schemas/domaincommon.rng
2127 %{_datadir}/libvirt/schemas/domainsnapshot.rng
2128 %{_datadir}/libvirt/schemas/interface.rng
2129 %{_datadir}/libvirt/schemas/network.rng
2130 %{_datadir}/libvirt/schemas/networkcommon.rng
2131 %{_datadir}/libvirt/schemas/nodedev.rng
2132 %{_datadir}/libvirt/schemas/nwfilter.rng
2133 %{_datadir}/libvirt/schemas/secret.rng
2134 %{_datadir}/libvirt/schemas/storageencryption.rng
2135 %{_datadir}/libvirt/schemas/storagefilefeatures.rng
2136 %{_datadir}/libvirt/schemas/storagepool.rng
2137 %{_datadir}/libvirt/schemas/storagevol.rng
2139 %{_datadir}/libvirt/cpu_map.xml
2140 %{_datadir}/libvirt/libvirtLogo.png
2143 %{_unitdir}/libvirt-guests.service
2145 %{_sysconfdir}/rc.d/init.d/libvirt-guests
2147 %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
2148 %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
2149 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
2152 %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
2157 %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell
2158 %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf
2159 %{_mandir}/man1/virt-login-shell.1*
2163 %defattr(-, root, root)
2166 %dir %{_includedir}/libvirt
2167 %{_includedir}/libvirt/*.h
2168 %{_libdir}/pkgconfig/libvirt.pc
2170 %dir %{_datadir}/libvirt/api/
2171 %{_datadir}/libvirt/api/libvirt-api.xml
2172 %{_datadir}/libvirt/api/libvirt-qemu-api.xml
2173 %{_datadir}/libvirt/api/libvirt-lxc-api.xml
2175 %doc docs/*.html docs/html docs/*.gif
2176 %doc docs/libvirt-api.xml
2177 %doc examples/hellolibvirt
2178 %doc examples/object-events
2179 %doc examples/dominfo
2180 %doc examples/domsuspend
2181 %doc examples/openauth
2183 %doc examples/systemtap
2186 * Mon Jan 27 2014 Cole Robinson <crobinso@redhat.com> - 1.2.1-2
2187 - Rebuild for openwsman soname bump
2189 * Tue Jan 21 2014 Daniel P. Berrange <berrange@redhat.com> - 1.2.1-1
2190 - Update to 1.2.1 release
2192 * Mon Dec 2 2013 Daniel P. Berrange <berrange@redhat.com> - 1.2.0-1
2193 - Update to 1.2.0 release with python in a separate srpm
2195 * Tue Nov 12 2013 Cole Robinson <crobinso@redhat.com> - 1.1.4-2
2196 - virsh nodedev-detach fails if device has no driver (bz #1028629)
2198 * Mon Nov 4 2013 Daniel Veillard <veillard@redhat.com> - 1.1.4-1
2199 - upstream release of 1.1.4
2200 - Add support for AArch64 architecture
2201 - Various improvements on test code and test driver
2202 - a lot of bug fixes and various improvements
2204 * Sun Oct 06 2013 Cole Robinson <crobinso@redhat.com> - 1.1.3-2
2205 - Allow QoS change with update-device (bz #1014200)
2206 - Fix nwfilter crash during firewalld install (bz #1014762)
2207 - Fix crash with nographics (bz #1014088)
2209 * Tue Oct 1 2013 Daniel Veillard <veillard@redhat.com> - 1.1.3-1
2210 - VMware: Initial VMware Fusion support and various improvements
2211 - libvirt: add new public API virConnectGetCPUModelNames
2212 - various libxl driver improvements
2213 - LXC many container driver improvement
2214 - ARM cpu improvements
2215 - a lot of bug and leak fixes and various improvements
2217 * Tue Sep 24 2013 Cole Robinson <crobinso@redhat.com> - 1.1.2-4
2218 - Fix snapshot restore when VM has disabled usb support (bz #1011520)
2220 * Mon Sep 23 2013 Cole Robinson <crobinso@redhat.com> - 1.1.2-3
2221 - Sync with v1.1.2-maint
2222 - Rebuild for libswan soname bump (bz #1009701)
2223 - CVE-2013-4311: Insecure polkit usage (bz #1009539, bz #1005332)
2224 - CVE-2013-4296: Invalid free memory stats (bz #1006173, bz #1009667)
2225 - CVE-2013-4297: Invalid free in NBDDeviceAssociate (bz #1006505, bz #1006511)
2226 - Fix virsh block-commit abort (bz #1010056)
2228 * Wed Sep 18 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.2-2
2229 - Rebuild for soname break in openswman package
2231 * Mon Sep 2 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.2-1
2232 - Update to 1.1.2 release
2234 * Tue Aug 20 2013 Cole Robinson <crobinso@redhat.com> - 1.1.1-3
2235 - Fix launching ARM guests on x86 (patches posted upstream, F20 feature)
2237 * Wed Aug 14 2013 Cole Robinson <crobinso@redhat.com> - 1.1.1-2
2238 - CVE-2013-4239: xen: memory corruption in legacy driver (bz #996241, bz
2241 * Tue Jul 30 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.1-1
2242 - Update to 1.1.1 release
2244 * Sun Jul 28 2013 Dennis Gilmore <dennis@ausil.us> - 1.1.0-5
2245 - fix doc path in libvirt-python
2247 * Thu Jul 25 2013 Cole Robinson <crobinso@redhat.com> - 1.1.0-4
2248 - CVE-2013-4153: Fix double free of returned JSON (bz #986408, bz #986383)
2249 - CVE-2013-4154: Crash of libvirtd if guest agent not configured (bz #986386,
2252 * Wed Jul 17 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.0-3
2253 - Rebuild for change in Xen library ABI/soname
2255 * Thu Jul 11 2013 Cole Robinson <crobinso@redhat.com> - 1.1.0-2
2256 - CVE-2013-2230 libvirt: multiple registered events crash
2258 * Mon Jul 1 2013 Daniel Veillard <veillard@redhat.com> - 1.1.0-1
2259 - CVE-2013-2218: Fix crash listing network interfaces with filters
2260 - Fine grained ACL support for the API
2261 - Extensible migration APIs
2262 - various improvements in the Xen driver
2263 - agent based vCPU hotplug support
2264 - various bug fixes and improvements including localizations
2266 * Fri Jun 14 2013 Peter Robinson <pbrobinson@fedoraproject.org> 1.0.6-3
2267 - Enable KVM support on ARM
2269 * Sat Jun 08 2013 Cole Robinson <crobinso@redhat.com> - 1.0.6-2
2270 - Drop bogus dep on vbox
2272 * Mon Jun 3 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.6-1
2273 - Update to 1.0.6 release
2275 * Sun May 19 2013 Cole Robinson <crobinso@redhat.com> - 1.0.5.1-1
2276 - Rebased to version 1.0.5.1
2277 - Follow updated packaging guidelines for user alloc (bz #924501)
2278 - CVE-2013-1962 Open files DoS (bz #963789, bz #953107)
2280 * Tue May 14 2013 Cole Robinson <crobinso@redhat.com> - 1.0.5-3
2281 - Fix stream operations like screenshot (bz #960879)
2283 * Fri May 3 2013 Richard W.M. Jones <rjones@redhat.com> - 1.0.5-2
2284 - Fix network driver when using qemu:///session (bz #958907).
2286 * Thu May 2 2013 Daniel Veillard <veillard@redhat.com> - 1.0.5-1
2287 - Update to 1.0.5 release
2288 - add support for NVRAM device
2289 - Add XML config for resource partitions
2290 - Add support for TPM
2291 - NPIV storage migration support
2292 - various bug fixes and improvements including localizations
2294 * Mon Apr 1 2013 Daniel Veillard <veillard@redhat.com> - 1.0.4-1
2295 - Update to 1.0.4 release
2297 * Tue Mar 5 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.3-1
2298 - Update to 1.0.3 release
2300 * Thu Feb 28 2013 Richard W.M. Jones <rjones@redhat.com> - 1.0.2-4
2301 - Backport "qemu: check backing chains even when cgroup is omitted"
2303 - Disable virnettlscontexttest which apparently fails because of
2304 a broken gnutls3. Note since this patch touches Makefile.am, I
2305 have enabled autoreconf (enable_autotools).
2307 * Tue Feb 5 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.2-2
2308 - Fix missing python binding constants
2310 * Fri Feb 1 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.2-1
2311 - Update to 1.0.2 release
2313 * Tue Jan 29 2013 Cole Robinson <crobinso@redhat.com> - 1.0.1-6
2314 - Fix network persistence after define (bz #890492)
2316 * Mon Jan 28 2013 Cole Robinson <crobinso@redhat.com> - 1.0.1-5
2317 - CVE-2013-0170 libvirt: use-after-free in virNetMessageFree() (bz #893450, bz
2320 * Sun Jan 20 2013 Richard W.M. Jones <rjones@redhat.com> - 1.0.1-4
2321 - Rebuild for libnl soname breakage (RHBZ#901569).
2323 * Fri Jan 18 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.1-3
2324 - Rebuild for libnl3 soname change
2325 - Deal with broken kernel headers
2327 * Mon Dec 17 2012 Cole Robinson <crobinso@redhat.com> - 1.0.1-2
2328 - Fix scriplet warning when uninstalling libvirt-client (bz #888071)
2330 * Mon Dec 17 2012 Daniel Veillard <veillard@redhat.com> - 1.0.1-1
2331 - Update to 1.0.1 release
2333 * Thu Nov 8 2012 Daniel P. Berrange <berrange@redhat.com> - 1.0.0-1
2334 - Update to 1.0.0 release
2336 * Tue Oct 30 2012 Cole Robinson <crobinso@redhat.com> - 0.10.2.1-2
2337 - Disable libxl on F18 too
2339 * Sat Oct 27 2012 Cole Robinson <crobinso@redhat.com> - 0.10.2.1-1
2340 - Rebased to version 0.10.2.1
2341 - Fix lvm volume creation when alloc=0 (bz #866481)
2342 - Clarify virsh send-keys man page example (bz #860004)
2343 - Fix occasional deadlock via virDomainDestroy (bz #859009)
2344 - Fix LXC deadlock from ctrl-c (bz #848119)
2345 - Fix occasional selinux denials with macvtap (bz #798605)
2346 - Fix multilib conflict with systemtap files (bz #831425)
2347 - Don't trigger keytab warning in system logs (bz #745203)
2348 - Fix qemu domxml-2-native NIC model out (bz #636832)
2349 - Fix error message if not enough space for lvm vol (bz #609104)
2351 * Thu Oct 25 2012 Cole Robinson <crobinso@redhat.com> - 0.10.2-4
2352 - Disable libxl driver, since it doesn't build with xen 4.2 in rawhide
2354 * Mon Sep 24 2012 Richard W.M. Jones <rjones@redhat.com> - 0.10.2-3
2355 - Re-add Use-qemu-system-i386-as-binary-instead-of-qemu.patch
2356 NB: This patch is Fedora-specific and not upstream.
2357 - Add upstream patches: don't duplicate environment variables (RHBZ#859596).
2359 * Mon Sep 24 2012 Daniel Veillard <veillard@redhat.com> - 0.10.2-1
2360 - Upstream release 0.10.2
2361 - network: define new API virNetworkUpdate
2362 - add support for QEmu sandbox support
2363 - blockjob: add virDomainBlockCommit
2364 - New APIs to get/set Node memory parameters
2365 - new API virConnectListAllSecrets
2366 - new API virConnectListAllNWFilters
2367 - new API virConnectListAllNodeDevices
2368 - parallels: add support of containers to the driver
2369 - new API virConnectListAllInterfaces
2370 - new API virConnectListAllNetworks
2371 - new API virStoragePoolListAllVolumes
2372 - Add PMSUSPENDED life cycle event
2373 - new API virStorageListAllStoragePools
2374 - Add per-guest S3/S4 state configuration
2375 - qemu: Support for Block Device IO Limits
2376 - a lot of bug fixes, improvements and portability work
2378 * Fri Sep 21 2012 Richard W.M. Jones <rjones@redhat.com> - 0.10.1-5
2379 - Add (upstream) patches to label sockets for SELinux (RHBZ#853393).
2381 * Thu Sep 13 2012 Richard W.M. Jones <rjones@redhat.com> - 0.10.1-4
2382 - Fix for 32 bit qemu renamed to qemu-system-i386 (RHBZ#857026).
2384 * Wed Sep 12 2012 Cole Robinson <crobinso@redhat.com> - 0.10.1-3
2385 - Fix libvirtd segfault with old netcf-libs (bz 853381)
2386 - Drop unneeded dnsmasq --filterwin2k
2387 - Fix unwanted connection closing, needed for boxes
2389 * Wed Sep 5 2012 Daniel P. Berrange <berrange@redhat.com> - 0.10.1-2
2390 - Remove dep on ceph RPM (rhbz #854360)
2392 * Fri Aug 31 2012 Daniel Veillard <veillard@redhat.com> - 0.10.1-1
2393 - upstream release of 0.10.1
2394 - many fixes from 0.10.0
2396 * Wed Aug 29 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-1
2397 - upstream release of 0.10.0
2398 - agent: add qemuAgentArbitraryCommand() for general qemu agent command
2399 - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
2400 - network: use firewalld instead of iptables, when available
2401 - network: make network driver vlan-aware
2402 - esx: Implement network driver
2403 - driver for parallels hypervisor
2404 - Various LXC improvements
2405 - Add virDomainGetHostname
2406 - a lot of bug fixes, improvements and portability work
2408 * Thu Aug 23 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-0rc1
2409 - release candidate 1 of 0.10.0
2411 * Tue Aug 14 2012 Daniel P. Berrange <berrange@redhat.com> - 0.10.0-0rc0.2
2412 - Enable autotools to make previous patch work
2414 * Tue Aug 14 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-0rc0.1
2415 - fix security driver missing from the daemon
2417 * Wed Aug 8 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-0rc0
2418 - snapshot before 0.10.0 in a few weeks
2419 - adds the parallel driver support
2421 * Mon Jul 23 2012 Richard W.M. Jones <rjones@redhat.com> - 0.9.13-3
2422 - Add upstream patch to fix RHBZ#842114.
2424 * Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.9.13-2
2425 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
2427 * Mon Jul 2 2012 Daniel Veillard <veillard@redhat.com> - 0.9.13-1
2428 - S390: support for s390(x)
2429 - snapshot: implement new APIs for esx and vbox
2430 - snapshot: new query APIs and many improvements
2431 - virsh: Allow users to reedit rejected XML
2432 - nwfilter: add DHCP snooping
2433 - Enable driver modules in libvirt RPM
2434 - Default to enable driver modules for libvirtd
2435 - storage backend: Add RBD (RADOS Block Device) support
2436 - sVirt support for LXC domains inprovement
2437 - a lot of bug fixes, improvements and portability work
2439 * Mon May 14 2012 Daniel Veillard <veillard@redhat.com> - 0.9.12-1
2440 - qemu: allow snapshotting of sheepdog and rbd disks
2441 - blockjob: add new APIs
2442 - a lot of bug fixes, improvements and portability work
2444 * Thu Apr 26 2012 Cole Robinson <crobinso@redhat.com> - 0.9.11.3-1
2445 - Rebased to version 0.9.11.3
2446 - Abide URI username when connecting to hypervisor (bz 811397)
2447 - Fix managed USB mode (bz 814866)
2448 - Fix crash connecting to ESX host (bz 811891)
2450 * Wed Apr 4 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.11-1
2451 - Update to 0.9.11 release
2453 * Tue Apr 3 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-4
2454 - Revert previous change
2456 * Sat Mar 31 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-3
2457 - Refactor RPM spec to allow install without default configs
2459 * Thu Mar 15 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-2
2460 - Rebuild for libparted soname break
2462 * Mon Feb 13 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-1
2465 * Thu Jan 12 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.9-2
2466 - Fix LXC I/O handling
2468 * Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
2469 - Add API virDomain{S,G}etInterfaceParameters
2470 - Add API virDomain{G, S}etNumaParameters
2471 - Add support for ppc64 qemu
2472 - Support Xen domctl v8
2473 - many improvements and bug fixes
2475 * Thu Dec 8 2011 Daniel P. Berrange <berrange@redhat.com> - 0.9.8-2
2476 - Fix install of libvirt-guests.service & libvirtd.service
2478 * Thu Dec 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.8-1
2479 - Add support for QEMU 1.0
2480 - Add preliminary PPC cpu driver
2481 - Add new API virDomain{Set, Get}BlockIoTune
2482 - block_resize: Define the new API
2483 - Add a public API to invoke suspend/resume on the host
2484 - various improvements for LXC containers
2485 - Define keepalive protocol and add virConnectIsAlive API
2486 - Add support for STP and VLAN filtering
2487 - many improvements and bug fixes
2489 * Mon Nov 14 2011 Justin M. Forbes <jforbes@redhat.com> - 0.9.7-3
2490 - Remove versioned buildreq for yajl as 2.0.x features are not required.
2492 * Thu Nov 10 2011 Daniel P. Berrange <berrange@redhat.com> - 0.9.7-2
2493 - Rebuild for yajl 2.0.1
2495 * Tue Nov 8 2011 Daniel P. Berrange <berrange@redhat.com> - 0.9.7-1
2496 - Update to 0.9.7 release
2498 * Tue Oct 11 2011 Dan Horák <dan[at]danny.cz> - 0.9.6-3
2499 - xenlight available only on Xen arches (#745020)
2501 * Mon Oct 3 2011 Laine Stump <laine@redhat.com> - 0.9.6-2
2502 - Make PCI multifunction support more manual - Bug 742836
2503 - F15 build still uses cgconfig - Bug 738725
2505 * Thu Sep 22 2011 Daniel Veillard <veillard@redhat.com> - 0.9.6-1
2506 - Fix the qemu reboot bug and a few others bug fixes
2508 * Tue Sep 20 2011 Daniel Veillard <veillard@redhat.com> - 0.9.5-1
2509 - many snapshot improvements (Eric Blake)
2510 - latency: Define new public API and structure (Osier Yang)
2511 - USB2 and various USB improvements (Marc-André Lureau)
2512 - storage: Add fs pool formatting (Osier Yang)
2513 - Add public API for getting migration speed (Jim Fehlig)
2514 - Add basic driver for Microsoft Hyper-V (Matthias Bolte)
2515 - many improvements and bug fixes
2517 * Wed Aug 3 2011 Daniel Veillard <veillard@redhat.com> - 0.9.4-1
2518 - network bandwidth QoS control
2519 - Add new API virDomainBlockPull*
2520 - save: new API to manipulate save file images
2521 - CPU bandwidth limits support
2522 - allow to send NMI and key event to guests
2523 - new API virDomainUndefineFlags
2524 - Implement code to attach to external QEMU instances
2525 - bios: Add support for SGA
2526 - various missing python binding
2527 - many improvements and bug fixes
2529 * Sat Jul 30 2011 Dan Hor?k <dan[at]danny.cz> - 0.9.3-3
2530 - xenlight available only on Xen arches
2532 * Wed Jul 6 2011 Peter Robinson <pbrobinson@gmail.com> - 0.9.3-2
2533 - Add ARM to NUMA platform excludes
2535 * Mon Jul 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.3-1
2536 - new API virDomainGetVcpupinInfo
2537 - Add TXT record support for virtual DNS service
2538 - Support reboots with the QEMU driver
2539 - New API virDomainGetControlInfo API
2540 - New API virNodeGetMemoryStats
2541 - New API virNodeGetCPUTime
2542 - New API for send-key
2543 - New API virDomainPinVcpuFlags
2544 - support multifunction PCI device
2545 - lxc: various improvements
2546 - many improvements and bug fixes
2548 * Wed Jun 29 2011 Richard W.M. Jones <rjones@redhat.com> - 0.9.2-3
2549 - Rebuild because of libparted soname bump (libparted.so.0 -> libparted.so.1).
2551 * Tue Jun 21 2011 Laine Stump <laine@redhat.com> - 0.9.2-2
2552 - add rule to require netcf-0.1.8 during build so that new transactional
2553 network change APIs are included.
2554 - document that CVE-2011-2178 has been fixed (by virtue of rebase
2555 to 0.9.2 - see https://bugzilla.redhat.com/show_bug.cgi?id=709777)
2557 * Mon Jun 6 2011 Daniel Veillard <veillard@redhat.com> - 0.9.2-1
2558 - Framework for lock manager plugins
2559 - API for network config change transactions
2560 - flags for setting memory parameters
2561 - virDomainGetState public API
2562 - qemu: allow blkstat/blkinfo calls during migration
2563 - Introduce migration v3 API
2564 - Defining the Screenshot public API
2565 - public API for NMI injection
2566 - Various improvements and bug fixes
2568 * Wed May 25 2011 Richard W.M. Jones <rjones@redhat.com> - 0.9.1-3
2569 - Add upstream patches:
2570 0001-json-Avoid-passing-large-positive-64-bit-integers-to.patch
2571 0001-qemudDomainMemoryPeek-change-ownership-selinux-label.patch
2572 0002-remote-remove-bogus-virDomainFree.patch
2573 so that users can try out virt-dmesg.
2574 - Change /var/cache mode to 0711.
2576 * Thu May 5 2011 Daniel Veillard <veillard@redhat.com> - 0.9.1-1
2577 - support various persistent domain updates
2578 - improvements on memory APIs
2579 - Add virDomainEventRebootNew
2580 - various improvements to libxl driver
2581 - Spice: support audio, images and stream compression
2582 - Various improvements and bug fixes
2584 * Thu Apr 7 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
2585 - Support cputune cpu usage tuning
2586 - Add public APIs for storage volume upload/download
2587 - Add public API for setting migration speed on the fly
2588 - Add libxenlight driver
2589 - qemu: support migration to fd
2590 - libvirt: add virDomain{Get,Set}BlkioParameters
2591 - setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
2592 - Expose event loop implementation as a public API
2593 - Dump the debug buffer to libvirtd.log on fatal signal
2595 - Various improvements and bug fixes
2597 * Mon Mar 14 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-3
2598 - fix a lack of API check on read-only connections
2601 * Mon Feb 21 2011 Daniel P. Berrange <berrange@redhat.com> - 0.8.8-2
2602 - Fix kernel boot with latest QEMU
2604 * Thu Feb 17 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-1
2605 - expose new API for sysinfo extraction
2606 - cgroup blkio weight support
2607 - smartcard device support
2608 - qemu: Support per-device boot ordering
2609 - Various improvements and bug fixes
2611 * Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.8.7-2
2612 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
2614 * Thu Jan 6 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
2615 - Preliminary support for VirtualBox 4.0
2617 - Add VMware Workstation and Player driver driver
2618 - Add network disk support
2619 - Various improvements and bug fixes
2621 - Add support for iSCSI target auto-discovery
2622 - QED: Basic support for QED images
2623 - remote console support
2624 - support for SPICE graphics
2625 - sysinfo and VMBIOS support
2626 - virsh qemu-monitor-command
2627 - various improvements and bug fixes
2629 * Fri Oct 29 2010 Daniel Veillard <veillard@redhat.com> - 0.8.5-1
2630 - Enable JSON and netdev features in QEMU >= 0.13
2631 - framework for auditing integration
2632 - framework DTrace/SystemTap integration
2633 - Setting the number of vcpu at boot
2634 - Enable support for nested SVM
2635 - Virtio plan9fs filesystem QEMU
2636 - Memory parameter controls
2637 - various improvements and bug fixes
2639 * Wed Sep 29 2010 jkeating - 0.8.4-3
2640 - Rebuilt for gcc bug 634757
2642 * Thu Sep 16 2010 Dan Horák <dan[at]danny.cz> - 0.8.4-2
2643 - disable the nwfilterxml2xmltest also on s390(x)
2645 * Mon Sep 13 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
2646 - Upstream release 0.8.4
2648 * Mon Aug 23 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.3-2
2649 - Fix potential overflow in boot menu code
2651 * Mon Aug 23 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.3-1
2652 - Upstream release 0.8.3
2654 * Wed Jul 21 2010 David Malcolm <dmalcolm@redhat.com> - 0.8.2-3
2655 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
2657 * Mon Jul 12 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.2-2
2658 - CVE-2010-2237 ignoring defined main disk format when looking up disk backing stores
2659 - CVE-2010-2238 ignoring defined disk backing store format when recursing into disk
2660 image backing stores
2661 - CVE-2010-2239 not setting user defined backing store format when creating new image
2662 - CVE-2010-2242 libvirt: improperly mapped source privileged ports may allow for
2663 obtaining privileged resources on the host
2665 * Mon Jul 5 2010 Daniel Veillard <veillard@redhat.com> - 0.8.2-1
2666 - Upstream release 0.8.2
2667 - phyp: adding support for IVM
2668 - libvirt: introduce domainCreateWithFlags API
2669 - add 802.1Qbh and 802.1Qbg switches handling
2670 - Support for VirtualBox version 3.2
2671 - Init script for handling guests on shutdown/boot
2672 - qemu: live migration with non-shared storage for kvm
2674 * Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
2675 - Upstream release 0.8.1
2676 - Starts dnsmasq from libvirtd with --dhcp-hostsfile
2677 - Add virDomainGetBlockInfo API to query disk sizing
2678 - a lot of bug fixes and cleanups
2680 * Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
2681 - Upstream release 0.8.0
2682 - Snapshotting support (QEmu/VBox/ESX)
2683 - Network filtering API
2685 - new APIs for domain events
2686 - Libvirt managed save API
2687 - timer subselection for domain clock
2689 - API to update guest CPU to host CPU
2690 - virDomainUpdateDeviceFlags new API
2691 - migrate max downtime API
2693 - and many bug fixes
2695 * Tue Mar 30 2010 Richard W.M. Jones <rjones@redhat.com> - 0.7.7-3.fc14
2696 - No change, just rebuild against new libparted with bumped soname.
2698 * Mon Mar 22 2010 Cole Robinson <crobinso@redhat.com> - 0.7.7-2.fc14
2699 - Fix USB devices by product with security enabled (bz 574136)
2700 - Set kernel/initrd in security driver, fixes some URL installs (bz 566425)
2702 * Fri Mar 5 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
2704 - async job handling
2706 - computing baseline CPU
2707 - virDomain{Attach,Detach}DeviceFlags
2708 - assorted bug fixes and lots of cleanups
2710 * Tue Feb 16 2010 Adam Jackson <ajax@redhat.com> 0.7.6-2
2711 - libvirt-0.7.6-add-needed.patch: Fix FTBFS from --no-add-needed
2712 - Add BuildRequires: xmlrpc-c-client for libxmlrpc_client.so
2714 * Wed Feb 3 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1
2715 - upstream release of 0.7.6
2716 - Use QEmu new device adressing when possible
2717 - Implement CPU topology support for QEMU driver
2718 - Implement SCSI controller hotplug/unplug for QEMU
2719 - Implement support for multi IQN
2720 - a lot of fixes and improvements
2722 * Thu Jan 14 2010 Chris Weyl <cweyl@alumni.drew.edu> 0.7.5-3
2723 - bump for libssh2 rebuild
2725 * Tue Jan 12 2010 Daniel P. Berrange <berrange@redhat.com> - 0.7.5-2
2726 - Rebuild for libparted soname change
2728 * Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
2729 - Add new API virDomainMemoryStats
2730 - Public API and domain extension for CPU flags
2731 - vbox: Add support for version 3.1
2732 - Support QEMU's virtual FAT block device driver
2735 * Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.4-1
2736 - upstream release of 0.7.4
2737 - udev node device backend
2738 - API to check object properties
2739 - better QEmu monitor processing
2740 - MAC address based port filtering for qemu
2741 - support IPv6 and multiple addresses per interfaces
2744 * Thu Nov 19 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-6
2745 - Really fix restore file labelling this time
2747 * Wed Nov 11 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-5
2748 - Disable numactl on s390[x]. Again.
2750 * Wed Nov 11 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-4
2751 - Fix QEMU save/restore permissions / labelling
2753 * Thu Oct 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.2-3
2754 - Avoid compressing small log files (#531030)
2756 * Thu Oct 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.2-2
2757 - Make libvirt-devel require libvirt-client, not libvirt
2758 - Fix qemu machine types handling
2760 * Wed Oct 14 2009 Daniel Veillard <veillard@redhat.com> - 0.7.2-1
2761 - Upstream release of 0.7.2
2762 - Allow to define ESX domains
2763 - Allows suspend and resulme of LXC domains
2764 - API for data streams
2767 * Tue Oct 13 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-12
2768 - Fix restore of qemu guest using raw save format (#523158)
2770 * Fri Oct 9 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-11
2771 - Fix libvirtd memory leak during error reply sending (#528162)
2772 - Add several PCI hot-unplug typo fixes from upstream
2774 * Tue Oct 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-10
2775 - Create /var/log/libvirt/{lxc,uml} dirs for logrotate
2776 - Make libvirt-python dependon on libvirt-client
2777 - Sync misc minor changes from upstream spec
2779 * Tue Oct 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-9
2780 - Change logrotate config to weekly (#526769)
2782 * Thu Oct 1 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-8
2783 - Disable sound backend, even when selinux is disabled (#524499)
2784 - Re-label qcow2 backing files (#497131)
2786 * Wed Sep 30 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-7
2787 - Fix USB device passthrough (#522683)
2789 * Mon Sep 21 2009 Chris Weyl <cweyl@alumni.drew.edu> - 0.7.1-6
2790 - rebuild for libssh2 1.2
2792 * Mon Sep 21 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-5
2793 - Don't set a bogus error in virDrvSupportsFeature()
2794 - Fix raw save format
2796 * Thu Sep 17 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-4
2797 - A couple of hot-unplug memory handling fixes (#523953)
2799 * Thu Sep 17 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-3
2800 - disable numactl on s390[x]
2802 * Thu Sep 17 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-2
2803 - revamp of spec file for modularity and RHELs
2805 * Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
2806 - Upstream release of 0.7.1
2807 - ESX, VBox driver updates
2809 - support for encrypted (qcow) volume
2810 - compressed save image format for Qemu/KVM
2811 - QEmu host PCI device hotplug support
2812 - configuration of huge pages in guests
2815 * Mon Sep 14 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.2.gitfac3f4c
2816 - Update to newer snapshot of 0.7.1
2817 - Stop libvirt using untrusted 'info vcpus' PID data (#520864)
2818 - Support relabelling of USB and PCI devices
2819 - Enable multipath storage support
2820 - Restart libvirtd upon RPM upgrade
2822 * Sun Sep 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.1.gitg3ef2e05
2823 - Update to pre-release git snapshot of 0.7.1
2824 - Drop upstreamed patches
2826 * Wed Aug 19 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-6
2827 - Fix migration completion with newer versions of qemu (#516187)
2829 * Wed Aug 19 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-5
2830 - Add PCI host device hotplug support
2831 - Allow PCI bus reset to reset other devices (#499678)
2832 - Fix stupid PCI reset error message (bug #499678)
2833 - Allow PM reset on multi-function PCI devices (bug #515689)
2834 - Re-attach PCI host devices after guest shuts down (bug #499561)
2835 - Fix list corruption after disk hot-unplug
2836 - Fix minor 'virsh nodedev-list --tree' annoyance
2838 * Thu Aug 13 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.0-4
2839 - Rewrite policykit support (rhbz #499970)
2840 - Log and ignore NUMA topology problems (rhbz #506590)
2842 * Mon Aug 10 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-3
2843 - Don't fail to start network if ipv6 modules is not loaded (#516497)
2845 * Thu Aug 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-2
2846 - Make sure qemu can access kernel/initrd (bug #516034)
2847 - Set perms on /var/lib/libvirt/boot to 0711 (bug #516034)
2849 * Wed Aug 5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
2850 - ESX, VBox3, Power Hypervisor drivers
2851 - new net filesystem glusterfs
2852 - Storage cloning for LVM and Disk backends
2853 - interface implementation based on netcf
2854 - Support cgroups in QEMU driver
2855 - QEmu hotplug NIC support
2858 * Fri Jul 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.5-1
2861 * Fri May 29 2009 Daniel Veillard <veillard@redhat.com> - 0.6.4-1
2865 * Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1
2869 * Fri Apr 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
2872 * Wed Mar 4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
2875 * Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
2878 * Tue Nov 25 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1
2881 * Tue Sep 23 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-1
2884 * Mon Sep 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-1
2887 * Wed Jun 25 2008 Daniel Veillard <veillard@redhat.com> - 0.4.4-1
2889 - mostly a few bug fixes from 0.4.3
2891 * Thu Jun 12 2008 Daniel Veillard <veillard@redhat.com> - 0.4.3-1
2893 - lots of bug fixes and small improvements
2895 * Tue Apr 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.2-1
2897 - lots of bug fixes and small improvements
2899 * Mon Mar 3 2008 Daniel Veillard <veillard@redhat.com> - 0.4.1-1
2903 - lots of assorted improvements, bugfixes and cleanups
2904 - documentation and localization improvements
2906 * Tue Dec 18 2007 Daniel Veillard <veillard@redhat.com> - 0.4.0-1
2908 - SASL based authentication
2909 - PolicyKit authentication
2910 - improved NUMA and statistics support
2911 - lots of assorted improvements, bugfixes and cleanups
2912 - documentation and localization improvements
2914 * Sun Sep 30 2007 Daniel Veillard <veillard@redhat.com> - 0.3.3-1
2918 - lots of assorted improvements, bugfixes and cleanups
2919 - documentation and localization improvements
2921 * Tue Aug 21 2007 Daniel Veillard <veillard@redhat.com> - 0.3.2-1
2923 - API for domains migration
2924 - APIs for collecting statistics on disks and interfaces
2925 - lots of assorted bugfixes and cleanups
2926 - documentation and localization improvements
2928 * Tue Jul 24 2007 Daniel Veillard <veillard@redhat.com> - 0.3.1-1
2930 - localtime clock support
2931 - PS/2 and USB input devices
2932 - lots of assorted bugfixes and cleanups
2933 - documentation and localization improvements
2935 * Mon Jul 9 2007 Daniel Veillard <veillard@redhat.com> - 0.3.0-1
2937 - Secure remote access support
2938 - unification of daemons
2939 - lots of assorted bugfixes and cleanups
2940 - documentation and localization improvements
2942 * Fri Jun 8 2007 Daniel Veillard <veillard@redhat.com> - 0.2.3-1
2944 - lot of assorted bugfixes and cleanups
2945 - support for Xen-3.1
2948 * Tue Apr 17 2007 Daniel Veillard <veillard@redhat.com> - 0.2.2-1
2950 - lot of assorted bugfixes and cleanups
2951 - preparing for Xen-3.0.5
2953 * Thu Mar 22 2007 Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
2954 - don't require xen; we don't need the daemon and can control non-xen now
2955 - fix scriptlet error (need to own more directories)
2956 - update description text
2958 * Fri Mar 16 2007 Daniel Veillard <veillard@redhat.com> - 0.2.1-1
2960 - lot of bug and portability fixes
2961 - Add support for network autostart and init scripts
2962 - New API to detect the virtualization capabilities of a host
2963 - Documentation updates
2965 * Fri Feb 23 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-4.fc7
2966 - Fix loading of guest & network configs
2968 * Fri Feb 16 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
2969 - Disable kqemu support since its not in Fedora qemu binary
2970 - Fix for -vnc arg syntax change in 0.9.0 QEMU
2972 * Thu Feb 15 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
2973 - Fixed path to qemu daemon for autostart
2974 - Fixed generation of <features> block in XML
2975 - Pre-create config directory at startup
2977 * Wed Feb 14 2007 Daniel Veillard <veillard@redhat.com> 0.2.0-1.fc7
2978 - support for KVM and QEmu
2979 - support for network configuration
2982 * Mon Jan 22 2007 Daniel Veillard <veillard@redhat.com> 0.1.11-1.fc7
2983 - finish inactive Xen domains support
2985 - RelaxNG schemas for XML configs
2987 * Wed Dec 20 2006 Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
2988 - support for inactive Xen domains
2989 - improved support for Xen display and vnc
2991 - localization updates
2993 * Thu Dec 7 2006 Jeremy Katz <katzj@redhat.com> - 0.1.9-2
2994 - rebuild against python 2.5
2996 * Wed Nov 29 2006 Daniel Veillard <veillard@redhat.com> 0.1.9-1
2997 - better error reporting
2998 - python bindings fixes and extensions
2999 - add support for shareable drives
3000 - add support for non-bridge style networking
3001 - hot plug device support
3002 - added support for inactive domains
3003 - API to dump core of domains
3004 - various bug fixes, cleanups and improvements
3005 - updated the localization
3007 * Tue Nov 7 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-3
3008 - it's pkgconfig not pgkconfig !
3010 * Mon Nov 6 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-2
3011 - fixing spec file, added %dist, -devel requires pkgconfig and xen-devel
3012 - Resolves: rhbz#202320
3014 * Mon Oct 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-1
3015 - fix missing page size detection code for ia64
3016 - fix mlock size when getting domain info list from hypervisor
3017 - vcpu number initialization
3018 - don't label crashed domains as shut off
3019 - fix virsh man page
3020 - blktapdd support for alternate drivers like blktap
3021 - memory leak fixes (xend interface and XML parsing)
3023 - mlock/munlock size fixes
3025 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.7-1
3026 - Fix bug when running against xen-3.0.3 hypercalls
3027 - Fix memory bug when getting vcpus info from xend
3029 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.6-1
3030 - Support for localization
3031 - Support for new Xen-3.0.3 cdrom and disk configuration
3032 - Support for setting VNC port
3033 - Fix bug when running against xen-3.0.2 hypercalls
3034 - Fix reconnection problem when talking directly to http xend
3036 * Tue Sep 5 2006 Jeremy Katz <katzj@redhat.com> - 0.1.5-3
3037 - patch from danpb to support new-format cd devices for HVM guests
3039 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-2
3040 - reactivating ia64 support
3042 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-1
3045 - support for new hypervisor calls
3046 - early code for config files and defined domains
3048 * Mon Sep 4 2006 Daniel Berrange <berrange@redhat.com> - 0.1.4-5
3049 - add patch to address dom0_ops API breakage in Xen 3.0.3 tree
3051 * Mon Aug 28 2006 Jeremy Katz <katzj@redhat.com> - 0.1.4-4
3052 - add patch to support paravirt framebuffer in Xen
3054 * Mon Aug 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-3
3055 - another patch to fix network handling in non-HVM guests
3057 * Thu Aug 17 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-2
3058 - patch to fix virParseUUID()
3060 * Wed Aug 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-1
3061 - vCPUs and affinity support
3062 - more complete XML, console and boot options
3063 - specific features support
3064 - enforced read-only connections
3065 - various improvements, bug fixes
3067 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-6
3068 - add patch from pvetere to allow getting uuid from libvirt
3070 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-5
3073 * Thu Jul 27 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-4
3074 - don't BR xen, we just need xen-devel
3076 * Thu Jul 27 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-3
3077 - need rebuild since libxenstore is now versionned
3079 * Mon Jul 24 2006 Mark McLoughlin <markmc@redhat.com> - 0.1.3-2
3080 - Add BuildRequires: xen-devel
3082 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.1.3-1.1
3085 * Tue Jul 11 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-1
3086 - support for HVM Xen guests
3089 * Mon Jul 3 2006 Daniel Veillard <veillard@redhat.com> 0.1.2-1
3090 - added a proxy mechanism for read only access using httpu
3091 - fixed header includes paths
3093 * Wed Jun 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.1-1
3094 - extend and cleanup the driver infrastructure and code
3096 - extend uuid support
3097 - bug fixes, buffer handling cleanups
3098 - support for new Xen hypervisor API
3099 - test driver for unit testing
3100 - virsh --conect argument
3102 * Mon Apr 10 2006 Daniel Veillard <veillard@redhat.com> 0.1.0-1
3104 - new APIs: for Node information and Reboot
3105 - virsh improvements and extensions
3106 - documentation updates and man page
3107 - enhancement and fixes of the XML description format
3109 * Tue Feb 28 2006 Daniel Veillard <veillard@redhat.com> 0.0.6-1
3110 - added error handling APIs
3112 - improve python bindings
3113 - augment documentation and regression tests
3115 * Thu Feb 23 2006 Daniel Veillard <veillard@redhat.com> 0.0.5-1
3116 - new domain creation API
3117 - new UUID based APIs
3118 - more tests, documentation, devhelp
3121 * Fri Feb 10 2006 Daniel Veillard <veillard@redhat.com> 0.0.4-1
3122 - fixes some problems in 0.0.3 due to the change of names
3124 * Wed Feb 8 2006 Daniel Veillard <veillard@redhat.com> 0.0.3-1
3125 - changed library name to libvirt from libvir, complete and test the python
3128 * Sun Jan 29 2006 Daniel Veillard <veillard@redhat.com> 0.0.2-1
3129 - upstream release of 0.0.2, use xend, save and restore added, python bindings
3132 * Wed Nov 2 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1