3 %define mainstream_version 1.0.2
4 %define module_version_varname mainstream_version
7 #libvirt-RPMFLAGS := --without storage-disk --without storage-iscsi --without storage-scsi \
8 # --without storage-fs --without storage-lvm \
9 # --without polkit --without sasl --without audit --with capng --with udev \
10 # --without netcf --without avahi --without sanlock \
11 # --without xen --without qemu --without hyperv --without phyp --without esx \
13 %define _without_storage_disk true
14 %define _without_storage_iscsi true
15 %define _without_storage_fs true
16 %define _without_storage_lvm true
17 %define _without_polkit true
18 %define _without_sasl true
19 %define _without_audit true
20 #interface requires netcf
21 #%define _without_netcf true
22 %define _without_avahi true
23 %define _without_sanlock true
24 %define _without_xen true
25 %define _without_qemu true
26 %define _without_hyperv true
27 %define _without_phyp true
28 %define _without_esx true
29 %define _without_libxl true
31 %define enable_autotools 1
33 # If neither fedora nor rhel was defined, try to guess them from %{dist}
34 %if !0%{?rhel} && !0%{?fedora}
35 %{expand:%(echo "%{?dist}" | \
36 sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')}
37 %{expand:%(echo "%{?dist}" | \
38 sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}
41 # Default to skipping autoreconf. Distros can change just this one line
42 # (or provide a command-line override) if they backport any patches that
43 # touch configure.ac or Makefile.am.
44 %{!?enable_autotools:%define enable_autotools 0}
46 # A client only build will create a libvirt.so only containing
47 # the generic RPC driver, and test driver and no libvirtd
48 # Default to a full server + client build
51 # Now turn off server build in certain cases
53 # RHEL-5 builds are client-only for s390, ppc
55 %ifnarch %{ix86} x86_64 ia64
60 # Disable all server side drivers if client only build requested
62 %define server_drivers 0
64 %define server_drivers 1
67 # Always build with dlopen'd modules
68 %define with_driver_modules 1
70 # Now set the defaults for all the important features, independent
71 # of any particular OS
73 # First the daemon itself
74 %define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
75 %define with_avahi 0%{!?_without_avahi:%{server_drivers}}
77 # Then the hypervisor drivers that run in libvirtd
78 %define with_xen 0%{!?_without_xen:%{server_drivers}}
79 %define with_qemu 0%{!?_without_qemu:%{server_drivers}}
80 %define with_lxc 0%{!?_without_lxc:%{server_drivers}}
81 %define with_uml 0%{!?_without_uml:%{server_drivers}}
82 %define with_libxl 0%{!?_without_libxl:%{server_drivers}}
84 %define with_qemu_tcg %{with_qemu}
85 # Change if we ever provide qemu-kvm binaries on non-x86 hosts
87 %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
89 %define qemu_kvm_arches %{ix86} x86_64
92 %ifarch %{qemu_kvm_arches}
93 %define with_qemu_kvm %{with_qemu}
95 %define with_qemu_kvm 0
98 # Then the hypervisor drivers that run outside libvirtd, in libvirt.so
99 %define with_openvz 0%{!?_without_openvz:1}
100 %define with_vbox 0%{!?_without_vbox:1}
101 %define with_vmware 0%{!?_without_vmware:1}
102 %define with_phyp 0%{!?_without_phyp:1}
103 %define with_esx 0%{!?_without_esx:1}
104 %define with_hyperv 0%{!?_without_hyperv:1}
105 %define with_xenapi 0%{!?_without_xenapi:1}
106 %define with_parallels 0%{!?_without_parallels:1}
108 # Then the secondary host drivers, which run inside libvirtd
109 %define with_interface 0%{!?_without_interface:%{server_drivers}}
110 %define with_network 0%{!?_without_network:%{server_drivers}}
111 %define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
112 %define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
113 %define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
114 %define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
115 %define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
116 %if 0%{?fedora} >= 16
117 %define with_storage_rbd 0%{!?_without_storage_rbd:%{server_drivers}}
119 %define with_storage_rbd 0
121 %if 0%{?fedora} >= 17
122 %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:%{server_drivers}}
124 %define with_storage_sheepdog 0
126 %define with_numactl 0%{!?_without_numactl:%{server_drivers}}
127 %define with_selinux 0%{!?_without_selinux:%{server_drivers}}
129 # A few optional bits off by default, we enable later
130 %define with_polkit 0%{!?_without_polkit:0}
131 %define with_capng 0%{!?_without_capng:0}
132 %define with_fuse 0%{!?_without_fuse:0}
133 %define with_netcf 0%{!?_without_netcf:0}
134 %define with_udev 0%{!?_without_udev:0}
135 %define with_hal 0%{!?_without_hal:0}
136 %define with_yajl 0%{!?_without_yajl:0}
137 %define with_nwfilter 0%{!?_without_nwfilter:0}
138 %define with_libpcap 0%{!?_without_libpcap:0}
139 %define with_macvtap 0%{!?_without_macvtap:0}
140 %define with_libnl 0%{!?_without_libnl:0}
141 %define with_audit 0%{!?_without_audit:0}
142 %define with_dtrace 0%{!?_without_dtrace:0}
143 %define with_cgconfig 0%{!?_without_cgconfig:0}
144 %define with_sanlock 0%{!?_without_sanlock:0}
145 %define with_systemd 0%{!?_without_systemd:0}
146 %define with_numad 0%{!?_without_numad:0}
147 %define with_firewalld 0%{!?_without_firewalld:0}
148 %define with_libssh2 0%{!?_without_libssh2:0}
150 # Non-server/HV driver defaults which are always enabled
151 %define with_python 0%{!?_without_python:1}
152 %define with_sasl 0%{!?_without_sasl:1}
155 # Finally set the OS / architecture specific special cases
157 # Xen is available only on i386 x86_64 ia64
158 %ifnarch %{ix86} x86_64 ia64
163 # Numactl is not available on s390[x] and ARM
164 %ifarch s390 s390x %{arm}
165 %define with_numactl 0
168 # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
169 # VMWare, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
172 %define with_openvz 0
176 %define with_vmware 0
177 %define with_xenapi 0
179 %define with_hyperv 0
180 %define with_parallels 0
183 # Fedora 17 / RHEL-7 are first where we use systemd. Although earlier
184 # Fedora has systemd, libvirt still used sysvinit there.
185 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
186 %define with_systemd 1
189 # Fedora 18 / RHEL-7 are first where firewalld support is enabled
190 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
191 %define with_firewalld 1
194 # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
196 %define with_qemu_tcg 0
199 %define with_qemu_kvm 0
204 # RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
205 # on all archs. Other archs all have LXC available though
207 %define with_qemu_tcg 0
210 %define with_qemu_kvm 0
215 # Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
216 %if 0%{?fedora} && 0%{?fedora} < 16
222 # Fedora doesn't have new enough Xen for libxl until F18
223 %if 0%{?fedora} && 0%{?fedora} < 18
227 # PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
228 %if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
229 %define with_polkit 0%{!?_without_polkit:1}
232 # libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
233 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
234 %define with_capng 0%{!?_without_capng:1}
237 # fuse is used to provide virtualized /proc for LXC
238 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
239 %define with_fuse 0%{!?_without_fuse:1}
242 # netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
243 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
244 %define with_netcf 0%{!?_without_netcf:%{server_drivers}}
247 # udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
248 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
249 %define with_udev 0%{!?_without_udev:%{server_drivers}}
251 %define with_hal 0%{!?_without_hal:%{server_drivers}}
254 # interface requires netcf
255 %if ! 0%{?with_netcf}
256 %define with_interface 0
259 # Enable yajl library for JSON mode with QEMU
260 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
261 %define with_yajl 0%{!?_without_yajl:%{server_drivers}}
264 # Enable sanlock library for lock management with QEMU
265 # Sanlock is available only on i686 x86_64 for RHEL
266 %if 0%{?fedora} >= 16
267 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
270 %ifarch %{ix86} x86_64
271 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
275 # Enable libssh2 transport for new enough distros
276 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
277 %define with_libssh2 0%{!?_without_libssh2:1}
280 # Disable some drivers when building without libvirt daemon.
281 # The logic is the same as in configure.ac
282 %if ! %{with_libvirtd}
283 %define with_interface 0
284 %define with_network 0
290 %define with_storage_fs 0
291 %define with_storage_lvm 0
292 %define with_storage_iscsi 0
293 %define with_storage_mpath 0
294 %define with_storage_rbd 0
295 %define with_storage_sheepdog 0
296 %define with_storage_disk 0
299 %if %{with_qemu} || %{with_lxc} || %{with_uml}
300 %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
301 # Enable libpcap library
302 %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
303 %define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
305 # numad is used to manage the CPU and memory placement dynamically,
306 # it's not available on s390[x] and ARM.
307 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
308 %ifnarch s390 s390x %{arm}
309 %define with_numad 0%{!?_without_numad:%{server_drivers}}
318 %if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
319 %define with_audit 0%{!?_without_audit:1}
322 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
323 %define with_dtrace 1
326 # Pull in cgroups config system
327 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
328 %if %{with_qemu} || %{with_lxc}
329 %define with_cgconfig 0%{!?_without_cgconfig:1}
333 %if %{with_udev} || %{with_hal}
334 %define with_nodedev 1
336 %define with_nodedev 0
339 %if %{with_storage_fs} || %{with_storage_mpath} || %{with_storage_iscsi} || %{with_storage_lvm} || %{with_storage_disk}
340 %define with_storage 1
342 %define with_storage 0
346 # Force QEMU to run as non-root
347 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
348 %define qemu_user qemu
349 %define qemu_group qemu
351 %define qemu_user root
352 %define qemu_group root
356 # The RHEL-5 Xen package has some feature backports. This
357 # flag is set to enable use of those special bits on RHEL-5
364 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
365 %define with_systemd_macros 1
367 %define with_systemd_macros 0
371 Summary: Library providing a simple virtualization API
373 Version: %{mainstream_version}
376 Group: Development/Libraries
377 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
378 URL: http://libvirt.org/
380 %if %(echo %{version} | grep -o \\. | wc -l) == 3
381 %define mainturl stable_updates/
383 Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
384 Patch1: libcurl.patch
385 Patch2: libcurl-daemon.patch
386 Patch3: securityselinuxlabeltest.patch
389 Requires: libvirt-daemon = %{version}-%{release}
391 Requires: libvirt-daemon-config-network = %{version}-%{release}
394 Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
396 %if %{with_driver_modules}
398 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
401 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
404 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
407 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
410 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
413 %if %{with_interface}
414 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
416 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
417 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
418 Requires: libvirt-daemon-driver-network = %{version}-%{release}
419 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
420 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
423 Requires: libvirt-client = %{version}-%{release}
425 # All build-time requirements. Run-time requirements are
426 # listed against each sub-RPM
427 %if 0%{?enable_autotools}
428 BuildRequires: autoconf
429 BuildRequires: automake
430 BuildRequires: gettext-devel
431 BuildRequires: libtool
433 BuildRequires: python-devel
435 BuildRequires: systemd-units
438 BuildRequires: xen-devel
440 BuildRequires: libxml2-devel
441 BuildRequires: xhtml1-dtds
442 BuildRequires: libxslt
443 BuildRequires: readline-devel
444 BuildRequires: ncurses-devel
445 BuildRequires: gettext
446 BuildRequires: libtasn1-devel
447 BuildRequires: gnutls-devel
448 BuildRequires: libattr-devel
449 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
450 # for augparse, optionally used in testing
451 BuildRequires: augeas
454 BuildRequires: hal-devel
457 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
458 BuildRequires: systemd-devel >= 185
460 BuildRequires: libudev-devel >= 145
462 BuildRequires: libpciaccess-devel >= 0.10.9
465 BuildRequires: yajl-devel
468 # make sure libvirt is built with new enough sanlock on
469 # distros that have it; required for on_lockfailure
470 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
471 BuildRequires: sanlock-devel >= 2.4
473 BuildRequires: sanlock-devel >= 1.8
477 BuildRequires: libpcap-devel
480 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
481 BuildRequires: libnl3-devel
483 BuildRequires: libnl-devel
487 BuildRequires: avahi-devel
490 BuildRequires: libselinux-devel
493 BuildRequires: dnsmasq >= 2.41
494 BuildRequires: iptables
495 BuildRequires: iptables-ipv6
499 BuildRequires: ebtables
501 BuildRequires: module-init-tools
503 BuildRequires: cyrus-sasl-devel
506 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
507 # Only need the binary, not -devel
508 BuildRequires: polkit >= 0.93
510 BuildRequires: PolicyKit-devel >= 0.6
513 %if %{with_storage_fs}
514 # For mount/umount in FS driver
515 BuildRequires: util-linux
519 BuildRequires: /usr/bin/qemu-img
523 BuildRequires: /usr/sbin/qcow-create
526 %if %{with_storage_lvm}
530 %if %{with_storage_iscsi}
532 BuildRequires: iscsi-initiator-utils
534 %if %{with_storage_disk}
536 BuildRequires: parted-devel
538 # Broken RHEL-5 parted RPM is missing a dep
539 BuildRequires: e2fsprogs-devel
542 %if %{with_storage_mpath}
543 # For Multipath support
545 # Broken RHEL-5 packaging has header files in main RPM :-(
546 BuildRequires: device-mapper
548 BuildRequires: device-mapper-devel
550 %if %{with_storage_rbd}
551 BuildRequires: ceph-devel
555 # For QEMU/LXC numa info
556 BuildRequires: numactl-devel
559 BuildRequires: libcap-ng-devel >= 0.5.0
562 BuildRequires: fuse-devel >= 2.8.6
564 %if %{with_phyp} || %{with_libssh2}
565 BuildRequires: libssh2-devel >= 1.3.0
569 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
570 BuildRequires: netcf-devel >= 0.2.2
572 %if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
573 BuildRequires: netcf-devel >= 0.1.8
575 BuildRequires: netcf-devel >= 0.1.4
580 %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
581 BuildRequires: libcurl-devel
583 BuildRequires: curl-devel
587 BuildRequires: libwsman-devel >= 2.2.3
590 BuildRequires: audit-libs-devel
593 # we need /usr/sbin/dtrace
594 BuildRequires: systemtap-sdt-devel
597 %if %{with_storage_fs}
598 # For mount/umount in FS driver
599 BuildRequires: util-linux
600 # For showmount in FS driver (netfs discovery)
601 BuildRequires: nfs-utils
604 %if %{with_firewalld}
605 # Communication with the firewall daemon uses DBus
606 BuildRequires: dbus-devel
609 # Fedora build root suckage
612 # For storage wiping with different algorithms
619 Provides: bundled(gnulib)
622 Libvirt is a C toolkit to interact with the virtualization capabilities
623 of recent versions of Linux (and other OSes). The main package includes
624 the libvirtd server exporting the virtualization support.
627 Summary: API reference and website documentation
628 Group: Development/Libraries
631 Includes the API reference for the libvirt C library, and a complete
632 copy of the libvirt.org website documentation.
636 Summary: Server side daemon and supporting files for libvirt library
637 Group: Development/Libraries
639 # All runtime requirements for the libvirt package (runtime requrements
640 # for subpackages are listed later in those subpackages)
642 # The client side, i.e. shared libs and virsh are in a subpackage
643 Requires: %{name}-client = %{version}-%{release}
645 # for modprobe of pci devices
646 Requires: module-init-tools
647 # for /sbin/ip & /sbin/tc
657 Requires: dnsmasq >= 2.41
660 %if %{with_network} || %{with_nwfilter}
662 Requires: iptables-ipv6
667 %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)
668 Requires: netcf-libs >= 0.2.2
670 # needed for device enumeration
675 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
676 Requires: systemd >= 185
678 Requires: udev >= 145
682 %if 0%{?fedora} >= 12 || 0%{?rhel} >=6
683 Requires: polkit >= 0.93
685 Requires: PolicyKit >= 0.6
688 %if %{with_storage_fs}
692 # For pool-build probing for existing pools
693 BuildRequires: libblkid-devel >= 2.17
695 %if 0%{?fedora} >= 11
696 Requires: glusterfs-client >= 2.0.1
701 Requires: /usr/bin/qemu-img
702 # For image compression
710 Requires: /usr/sbin/qcow-create
713 %if %{with_storage_lvm}
717 %if %{with_storage_iscsi}
719 Requires: iscsi-initiator-utils
721 %if %{with_storage_disk}
724 Requires: device-mapper
726 %if %{with_storage_mpath}
727 # For multipath support
728 Requires: device-mapper
730 %if %{with_storage_sheepdog}
731 # For Sheepdog support
737 %ifarch %{ix86} x86_64 ia64
738 # For virConnectGetSysinfo
741 # For service management
743 Requires(post): systemd-units
744 Requires(post): systemd-sysv
745 Requires(preun): systemd-units
746 Requires(postun): systemd-units
751 # libvirtd depends on 'messagebus' service
755 Server side daemon required to manage the virtualization capabilities
756 of recent versions of Linux. Requires a hypervisor specific sub-RPM
757 for specific drivers.
760 %package daemon-config-network
761 Summary: Default configuration files for the libvirtd daemon
762 Group: Development/Libraries
764 Requires: libvirt-daemon = %{version}-%{release}
766 %description daemon-config-network
767 Default configuration files for setting up NAT based networking
771 %package daemon-config-nwfilter
772 Summary: Network filter configuration files for the libvirtd daemon
773 Group: Development/Libraries
775 Requires: libvirt-daemon = %{version}-%{release}
777 %description daemon-config-nwfilter
778 Network filter configuration files for cleaning guest traffic
781 %if %{with_driver_modules}
783 %package daemon-driver-network
784 Summary: Network driver plugin for the libvirtd daemon
785 Group: Development/Libraries
786 Requires: libvirt-daemon = %{version}-%{release}
788 %description daemon-driver-network
789 The network driver plugin for the libvirtd daemon, providing
790 an implementation of the virtual network APIs using the Linux
796 %package daemon-driver-nwfilter
797 Summary: Nwfilter driver plugin for the libvirtd daemon
798 Group: Development/Libraries
799 Requires: libvirt-daemon = %{version}-%{release}
801 %description daemon-driver-nwfilter
802 The nwfilter driver plugin for the libvirtd daemon, providing
803 an implementation of the firewall APIs using the ebtables,
804 iptables and ip6tables capabilities
809 %package daemon-driver-nodedev
810 Summary: Nodedev driver plugin for the libvirtd daemon
811 Group: Development/Libraries
812 Requires: libvirt-daemon = %{version}-%{release}
814 %description daemon-driver-nodedev
815 The nodedev driver plugin for the libvirtd daemon, providing
816 an implementation of the node device APIs using the udev
821 %if %{with_interface}
822 %package daemon-driver-interface
823 Summary: Interface driver plugin for the libvirtd daemon
824 Group: Development/Libraries
825 Requires: libvirt-daemon = %{version}-%{release}
827 %description daemon-driver-interface
828 The interface driver plugin for the libvirtd daemon, providing
829 an implementation of the network interface APIs using the
834 %package daemon-driver-secret
835 Summary: Secret driver plugin for the libvirtd daemon
836 Group: Development/Libraries
837 Requires: libvirt-daemon = %{version}-%{release}
839 %description daemon-driver-secret
840 The secret driver plugin for the libvirtd daemon, providing
841 an implementation of the secret key APIs.
845 %package daemon-driver-storage
846 Summary: Storage driver plugin for the libvirtd daemon
847 Group: Development/Libraries
848 Requires: libvirt-daemon = %{version}-%{release}
850 %description daemon-driver-storage
851 The storage driver plugin for the libvirtd daemon, providing
852 an implementation of the storage APIs using LVM, iSCSI,
858 %package daemon-driver-qemu
859 Summary: Qemu driver plugin for the libvirtd daemon
860 Group: Development/Libraries
861 Requires: libvirt-daemon = %{version}-%{release}
862 # There really is a hard cross-driver dependency here
863 Requires: libvirt-daemon-driver-network = %{version}-%{release}
865 %description daemon-driver-qemu
866 The qemu driver plugin for the libvirtd daemon, providing
867 an implementation of the hypervisor driver APIs using
873 %package daemon-driver-lxc
874 Summary: LXC driver plugin for the libvirtd daemon
875 Group: Development/Libraries
876 Requires: libvirt-daemon = %{version}-%{release}
877 # There really is a hard cross-driver dependency here
878 Requires: libvirt-daemon-driver-network = %{version}-%{release}
880 %description daemon-driver-lxc
881 The LXC driver plugin for the libvirtd daemon, providing
882 an implementation of the hypervisor driver APIs using
888 %package daemon-driver-uml
889 Summary: Uml driver plugin for the libvirtd daemon
890 Group: Development/Libraries
891 Requires: libvirt-daemon = %{version}-%{release}
893 %description daemon-driver-uml
894 The UML driver plugin for the libvirtd daemon, providing
895 an implementation of the hypervisor driver APIs using
901 %package daemon-driver-xen
902 Summary: Xen driver plugin for the libvirtd daemon
903 Group: Development/Libraries
904 Requires: libvirt-daemon = %{version}-%{release}
906 %description daemon-driver-xen
907 The Xen driver plugin for the libvirtd daemon, providing
908 an implementation of the hypervisor driver APIs using
914 %package daemon-driver-libxl
915 Summary: Libxl driver plugin for the libvirtd daemon
916 Group: Development/Libraries
917 Requires: libvirt-daemon = %{version}-%{release}
919 %description daemon-driver-libxl
920 The Libxl driver plugin for the libvirtd daemon, providing
921 an implementation of the hypervisor driver APIs using
924 %endif # %{with_driver_modules}
930 Summary: Server side daemon & driver required to run QEMU guests
931 Group: Development/Libraries
933 Requires: libvirt-daemon = %{version}-%{release}
934 %if %{with_driver_modules}
935 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
936 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
937 Requires: libvirt-daemon-driver-network = %{version}-%{release}
938 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
939 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
940 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
941 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
945 %description daemon-qemu
946 Server side daemon and driver required to manage the virtualization
947 capabilities of the QEMU TCG emulators
953 Summary: Server side daemon & driver required to run KVM guests
954 Group: Development/Libraries
956 Requires: libvirt-daemon = %{version}-%{release}
957 %if %{with_driver_modules}
958 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
959 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
960 Requires: libvirt-daemon-driver-network = %{version}-%{release}
961 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
962 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
963 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
964 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
968 %description daemon-kvm
969 Server side daemon and driver required to manage the virtualization
970 capabilities of the KVM hypervisor
976 Summary: Server side daemon & driver required to run LXC guests
977 Group: Development/Libraries
979 Requires: libvirt-daemon = %{version}-%{release}
980 %if %{with_driver_modules}
981 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
982 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
983 Requires: libvirt-daemon-driver-network = %{version}-%{release}
984 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
985 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
986 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
987 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
990 %description daemon-lxc
991 Server side daemon and driver required to manage the virtualization
998 Summary: Server side daemon & driver required to run UML guests
999 Group: Development/Libraries
1001 Requires: libvirt-daemon = %{version}-%{release}
1002 %if %{with_driver_modules}
1003 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
1004 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1005 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1006 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1007 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1008 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1009 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1011 # There are no UML kernel RPMs in Fedora/RHEL to depend on.
1013 %description daemon-uml
1014 Server side daemon and driver required to manage the virtualization
1019 %if %{with_xen} || %{with_libxl}
1021 Summary: Server side daemon & driver required to run XEN guests
1022 Group: Development/Libraries
1024 Requires: libvirt-daemon = %{version}-%{release}
1025 %if %{with_driver_modules}
1027 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
1030 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
1032 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1033 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1034 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1035 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1036 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1037 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1041 %description daemon-xen
1042 Server side daemon and driver required to manage the virtualization
1045 %endif # %{with_libvirtd}
1048 Summary: Client side library and utilities of the libvirt library
1049 Group: Development/Libraries
1052 # So remote clients can access libvirt over SSH tunnel
1053 # (client invokes 'nc' against the UNIX socket on the server)
1055 # Needed by libvirt-guests init script.
1057 # Needed by virt-pki-validate script.
1058 Requires: gnutls-utils
1059 # Needed for probing the power management features of the host.
1062 Requires: cyrus-sasl
1063 # Not technically required, but makes 'out-of-box' config
1064 # work correctly & doesn't have onerous dependencies
1065 Requires: cyrus-sasl-md5
1069 Shared libraries and client binaries needed to access to the
1070 virtualization capabilities of recent versions of Linux (and other OSes).
1073 Summary: Libraries, includes, etc. to compile with the libvirt library
1074 Group: Development/Libraries
1075 Requires: %{name}-client = %{version}-%{release}
1076 Requires: %{name}-docs = %{version}-%{release}
1080 Include header files & development libraries for the libvirt C library.
1083 %package lock-sanlock
1084 Summary: Sanlock lock manager plugin for QEMU driver
1085 Group: Development/Libraries
1086 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
1087 Requires: sanlock >= 2.4
1089 Requires: sanlock >= 1.8
1091 #for virt-sanlock-cleanup require augeas
1093 Requires: %{name}-daemon = %{version}-%{release}
1094 Requires: %{name}-client = %{version}-%{release}
1096 %description lock-sanlock
1097 Includes the Sanlock lock manager plugin for the QEMU
1103 Summary: Python bindings for the libvirt library
1104 Group: Development/Libraries
1105 Requires: %{name}-client = %{version}-%{release}
1108 The libvirt-python package contains a module that permits applications
1109 written in the Python programming language to use the interface
1110 supplied by the libvirt library to use the virtualization capabilities
1111 of recent versions of Linux (and other OSes).
1122 %define _without_xen --without-xen
1126 %define _without_qemu --without-qemu
1129 %if ! %{with_openvz}
1130 %define _without_openvz --without-openvz
1134 %define _without_lxc --without-lxc
1138 %define _without_vbox --without-vbox
1141 %if ! %{with_xenapi}
1142 %define _without_xenapi --without-xenapi
1146 %define _without_libxl --without-libxl
1150 %define _without_sasl --without-sasl
1154 %define _without_avahi --without-avahi
1158 %define _without_phyp --without-phyp
1162 %define _without_esx --without-esx
1165 %if ! %{with_hyperv}
1166 %define _without_hyperv --without-hyperv
1169 %if ! %{with_vmware}
1170 %define _without_vmware --without-vmware
1173 %if ! %{with_parallels}
1174 %define _without_parallels --without-parallels
1177 %if ! %{with_polkit}
1178 %define _without_polkit --without-polkit
1181 %if ! %{with_python}
1182 %define _without_python --without-python
1185 %if ! %{with_libvirtd}
1186 %define _without_libvirtd --without-libvirtd
1190 %define _without_uml --without-uml
1194 %define _with_rhel5_api --with-rhel5-api
1197 %if ! %{with_interface}
1198 %define _without_interface --without-interface
1201 %if ! %{with_network}
1202 %define _without_network --without-network
1205 %if ! %{with_storage_fs}
1206 %define _without_storage_fs --without-storage-fs
1209 %if ! %{with_storage_lvm}
1210 %define _without_storage_lvm --without-storage-lvm
1213 %if ! %{with_storage_iscsi}
1214 %define _without_storage_iscsi --without-storage-iscsi
1217 %if ! %{with_storage_disk}
1218 %define _without_storage_disk --without-storage-disk
1221 %if ! %{with_storage_mpath}
1222 %define _without_storage_mpath --without-storage-mpath
1225 %if ! %{with_storage_rbd}
1226 %define _without_storage_rbd --without-storage-rbd
1229 %if ! %{with_storage_sheepdog}
1230 %define _without_storage_sheepdog --without-storage-sheepdog
1233 %if ! %{with_numactl}
1234 %define _without_numactl --without-numactl
1238 %define _without_numad --without-numad
1242 %define _without_capng --without-capng
1246 %define _without_fuse --without-fuse
1250 %define _without_netcf --without-netcf
1253 %if ! %{with_selinux}
1254 %define _without_selinux --without-selinux
1258 %define _without_hal --without-hal
1262 %define _without_udev --without-udev
1266 %define _without_yajl --without-yajl
1269 %if ! %{with_sanlock}
1270 %define _without_sanlock --without-sanlock
1273 %if ! %{with_libpcap}
1274 %define _without_libpcap --without-libpcap
1277 %if ! %{with_macvtap}
1278 %define _without_macvtap --without-macvtap
1282 %define _without_audit --without-audit
1285 %if ! %{with_dtrace}
1286 %define _without_dtrace --without-dtrace
1289 %if ! %{with_driver_modules}
1290 %define _without_driver_modules --without-driver-modules
1293 %if %{with_firewalld}
1294 %define _with_firewalld --with-firewalld
1297 %define when %(date +"%%F-%%T")
1298 %define where %(hostname)
1299 %define who %{?packager}%{!?packager:Unknown}
1300 %define with_packager --with-packager="%{who}, %{when}, %{where}"
1301 %define with_packager_version --with-packager-version="%{release}"
1304 %define init_scripts --with-init_script=systemd
1306 %define init_scripts --with-init_script=redhat
1309 %if 0%{?enable_autotools}
1314 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
1315 %define with_selinux_mount --with-selinux-mount="/sys/fs/selinux"
1317 %define with_selinux_mount --with-selinux-mount="/selinux"
1321 %configure %{?_without_xen} \
1323 %{?_without_openvz} \
1326 %{?_without_libxl} \
1327 %{?_without_xenapi} \
1329 %{?_without_avahi} \
1330 %{?_without_polkit} \
1331 %{?_without_python} \
1332 %{?_without_libvirtd} \
1336 %{?_without_hyperv} \
1337 %{?_without_vmware} \
1338 %{?_without_parallels} \
1339 %{?_without_interface} \
1340 %{?_without_network} \
1341 %{?_with_rhel5_api} \
1342 %{?_without_storage_fs} \
1343 %{?_without_storage_lvm} \
1344 %{?_without_storage_iscsi} \
1345 %{?_without_storage_disk} \
1346 %{?_without_storage_mpath} \
1347 %{?_without_storage_rbd} \
1348 %{?_without_storage_sheepdog} \
1349 %{?_without_numactl} \
1350 %{?_without_numad} \
1351 %{?_without_capng} \
1353 %{?_without_netcf} \
1354 %{?_without_selinux} \
1355 %{?_with_selinux_mount} \
1359 %{?_without_sanlock} \
1360 %{?_without_libpcap} \
1361 %{?_without_macvtap} \
1362 %{?_without_audit} \
1363 %{?_without_dtrace} \
1364 %{?_without_driver_modules} \
1365 %{?_with_firewalld} \
1367 %{with_packager_version} \
1368 --with-qemu-user=%{qemu_user} \
1369 --with-qemu-group=%{qemu_group} \
1371 make %{?_smp_mflags}
1377 %makeinstall SYSTEMD_UNIT_DIR=%{buildroot}%{_unitdir}
1378 for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap
1380 (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
1382 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
1383 rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
1384 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
1385 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
1386 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
1387 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
1388 %if %{with_driver_modules}
1389 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
1390 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
1394 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
1395 # We don't want to install /etc/libvirt/qemu/networks in the main %files list
1396 # because if the admin wants to delete the default network completely, we don't
1397 # want to end up re-incarnating it on every RPM upgrade.
1398 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
1399 cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
1400 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1401 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1402 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1403 # Strip auto-generated UUID - we need it generated per-install
1404 sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1406 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1407 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1410 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
1411 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1415 %if ! %{with_sanlock}
1416 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
1417 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1421 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
1422 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1425 %if ! %{with_python}
1426 rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
1428 rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}/examples
1432 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
1433 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
1436 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
1437 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
1440 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
1443 mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} \
1444 $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
1447 %ifarch %{power64} s390x x86_64 ia64 alpha sparc64
1448 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
1449 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
1450 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
1451 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
1455 %if 0%{?fedora} < 14 && 0%{?rhel} < 6
1456 rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
1465 # These tests don't current work in a mock build root
1466 for i in nodeinfotest seclabeltest
1469 printf 'int main(void) { return 0; }' > $i.c
1470 printf '#!/bin/sh\nexit 0\n' > $i
1475 %if %{with_libvirtd}
1477 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1478 # Normally 'setup' adds this in /etc/passwd, but this is
1479 # here for case of upgrades from earlier Fedora/RHEL. This
1480 # UID/GID pair is reserved for qemu:qemu
1481 getent group kvm >/dev/null || groupadd -g 36 -r kvm
1482 getent group qemu >/dev/null || groupadd -g 107 -r qemu
1483 getent passwd qemu >/dev/null || \
1484 useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
1491 # All newly defined networks will have a mac address for the bridge
1492 # auto-generated, but networks already existing at the time of upgrade
1493 # will not. We need to go through all the network configs, look for
1494 # those that don't have a mac address, and add one.
1496 network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \
1497 grep -L "mac address" *.xml; \
1498 cd %{_sysconfdir}/libvirt/qemu/networks && \
1499 grep -L "mac address" *.xml) 2>/dev/null \
1502 for file in $network_files
1504 # each file exists in either the config or state directory (or both) and
1505 # does not have a mac address specified in either. We add the same mac
1506 # address to both files (or just one, if the other isn't there)
1508 mac4=`printf '%X' $(($RANDOM % 256))`
1509 mac5=`printf '%X' $(($RANDOM % 256))`
1510 mac6=`printf '%X' $(($RANDOM % 256))`
1511 for dir in %{_localstatedir}/lib/libvirt/network \
1512 %{_sysconfdir}/libvirt/qemu/networks
1514 if test -f $dir/$file
1517 "s|\(<bridge.*$\)|\0\n <mac address='52:54:00:$mac4:$mac5:$mac6'/>|" \
1521 echo "failed to add <mac address='52:54:00:$mac4:$mac5:$mac6'/>" \
1523 mv -f $dir/$file.orig $dir/$file
1525 rm -f $dir/$file.orig
1533 %if %{with_systemd_macros}
1534 %systemd_post libvirtd.service
1536 if [ $1 -eq 1 ] ; then
1537 # Initial installation
1538 /bin/systemctl enable virtlockd.socket >/dev/null 2>&1 || :
1539 /bin/systemctl enable libvirtd.service >/dev/null 2>&1 || :
1543 %if %{with_cgconfig}
1544 # Starting with Fedora 16/RHEL-7, systemd automounts all cgroups,
1545 # and cgconfig is no longer a necessary service.
1546 %if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 16)
1547 if [ "$1" -eq "1" ]; then
1548 /sbin/chkconfig cgconfig on
1553 /sbin/chkconfig --add libvirtd
1554 if [ "$1" -ge "1" ]; then
1555 /sbin/service libvirtd condrestart > /dev/null 2>&1
1561 %if %{with_systemd_macros}
1562 %systemd_preun libvirtd.service
1564 if [ $1 -eq 0 ] ; then
1565 # Package removal, not upgrade
1566 /bin/systemctl --no-reload disable virtlockd.socket > /dev/null 2>&1 || :
1567 /bin/systemctl --no-reload disable libvirtd.service > /dev/null 2>&1 || :
1568 /bin/systemctl stop libvirtd.service > /dev/null 2>&1 || :
1569 /bin/systemctl stop virtlockd.service > /dev/null 2>&1 || :
1574 /sbin/service libvirtd stop 1>/dev/null 2>&1
1575 /sbin/chkconfig --del libvirtd
1581 %if %{with_systemd_macros}
1582 %systemd_postun_with_restart libvirtd.service
1584 /bin/systemctl daemon-reload >/dev/null 2>&1 || :
1585 if [ $1 -ge 1 ] ; then
1586 # Package upgrade, not uninstall
1587 /bin/systemctl status virtlockd.service >/dev/null 2>&1
1588 if [ $? = 1 ] ; then
1589 /bin/systemctl kill --signal=USR1 virtlockd.service >/dev/null 2>&1 || :
1591 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1597 %post daemon-config-network
1598 if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
1599 UUID=`/usr/bin/uuidgen`
1600 sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
1601 < %{_datadir}/libvirt/networks/default.xml \
1602 > %{_sysconfdir}/libvirt/qemu/networks/default.xml
1603 ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1608 %triggerun -- libvirt < 0.9.4
1609 %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
1611 # If the package is allowed to autostart:
1612 /bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||:
1614 # Run these because the SysV package being removed won't do them
1615 /sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
1616 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1618 %endif # %{with_libvirtd}
1623 %if %{with_systemd_macros}
1624 %systemd_preun libvirt-guests.service
1628 /sbin/chkconfig --del libvirt-guests
1629 rm -f /var/lib/libvirt/libvirt-guests
1637 %if %{with_systemd_macros}
1638 %systemd_post libvirt-guests.service
1641 /sbin/chkconfig --add libvirt-guests
1648 %if %{with_systemd_macros}
1649 %systemd_postun_with_restart libvirt-guests.service
1651 %triggerun client -- libvirt < 0.9.4
1652 %{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
1654 # If the package is allowed to autostart:
1655 /bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||:
1657 # Run these because the SysV package being removed won't do them
1658 /sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || :
1659 /bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
1664 if getent group sanlock > /dev/null ; then
1665 chmod 0770 %{_localstatedir}/lib/libvirt/sanlock
1666 chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock
1671 %defattr(-, root, root)
1674 %defattr(-, root, root)
1676 %dir %{_datadir}/doc/libvirt-docs-%{version}
1677 %dir %{_datadir}/doc/libvirt-docs-%{version}/html
1678 %{_datadir}/doc/libvirt-docs-%{version}/html/*
1681 %dir %{_datadir}/gtk-doc/html/libvirt/
1682 %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
1683 %doc %{_datadir}/gtk-doc/html/libvirt/*.html
1684 %doc %{_datadir}/gtk-doc/html/libvirt/*.png
1685 %doc %{_datadir}/gtk-doc/html/libvirt/*.css
1687 %if %{with_libvirtd}
1689 %defattr(-, root, root)
1691 %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
1692 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
1695 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
1696 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
1697 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
1700 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
1703 %{_unitdir}/libvirtd.service
1704 %{_unitdir}/virtlockd.service
1705 %{_unitdir}/virtlockd.socket
1707 %{_sysconfdir}/rc.d/init.d/libvirtd
1708 %{_sysconfdir}/rc.d/init.d/virtlockd
1710 %doc daemon/libvirtd.upstart
1711 %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
1712 %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
1713 %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
1714 %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
1715 %config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
1717 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
1718 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
1719 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
1721 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
1724 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
1726 %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
1727 %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
1728 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
1731 %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
1732 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
1735 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
1738 %dir %{_datadir}/libvirt/
1741 %dir %{_datadir}/libvirt/networks/
1742 %{_datadir}/libvirt/networks/default.xml
1745 %ghost %dir %{_localstatedir}/run/libvirt/
1747 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
1748 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
1749 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
1750 %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
1753 %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
1754 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
1755 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
1758 %ghost %dir %{_localstatedir}/run/libvirt/lxc/
1759 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
1762 %ghost %dir %{_localstatedir}/run/libvirt/uml/
1763 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
1766 %ghost %dir %{_localstatedir}/run/libvirt/libxl/
1767 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
1770 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
1773 %ghost %dir %{_localstatedir}/run/libvirt/network/
1774 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
1775 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
1778 %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
1779 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
1782 %{_datadir}/augeas/lenses/libvirtd_qemu.aug
1783 %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1787 %{_datadir}/augeas/lenses/libvirtd_lxc.aug
1788 %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1791 %{_datadir}/augeas/lenses/libvirtd.aug
1792 %{_datadir}/augeas/lenses/tests/test_libvirtd.aug
1793 %{_datadir}/augeas/lenses/libvirt_lockd.aug
1794 %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
1797 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1798 %{_datadir}/polkit-1/actions/org.libvirt.unix.policy
1800 %{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
1804 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
1807 %attr(0755, root, root) %{_libexecdir}/libvirt_lxc
1810 %if %{with_storage_disk}
1811 %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
1814 %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
1815 %attr(0755, root, root) %{_sbindir}/libvirtd
1816 %attr(0755, root, root) %{_sbindir}/virtlockd
1818 %{_mandir}/man8/libvirtd.8*
1820 %if %{with_driver_modules}
1822 %files daemon-config-network
1823 %defattr(-, root, root)
1826 %if %{with_nwfilter}
1827 %files daemon-config-nwfilter
1828 %defattr(-, root, root)
1829 %{_sysconfdir}/libvirt/nwfilter/*.xml
1832 %if %{with_interface}
1833 %files daemon-driver-interface
1834 %defattr(-, root, root)
1835 %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
1839 %files daemon-driver-network
1840 %defattr(-, root, root)
1841 %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
1845 %files daemon-driver-nodedev
1846 %defattr(-, root, root)
1847 %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
1850 %if %{with_nwfilter}
1851 %files daemon-driver-nwfilter
1852 %defattr(-, root, root)
1853 %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
1856 %files daemon-driver-secret
1857 %defattr(-, root, root)
1858 %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
1861 %files daemon-driver-storage
1862 %defattr(-, root, root)
1863 %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
1867 %files daemon-driver-qemu
1868 %defattr(-, root, root)
1869 %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
1873 %files daemon-driver-lxc
1874 %defattr(-, root, root)
1875 %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
1879 %files daemon-driver-uml
1880 %defattr(-, root, root)
1881 %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so
1885 %files daemon-driver-xen
1886 %defattr(-, root, root)
1887 %{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so
1891 %files daemon-driver-libxl
1892 %defattr(-, root, root)
1893 %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
1895 %endif # %{with_driver_modules}
1897 %if %{with_qemu_tcg}
1899 %defattr(-, root, root)
1902 %if %{with_qemu_kvm}
1904 %defattr(-, root, root)
1909 %defattr(-, root, root)
1914 %defattr(-, root, root)
1917 %if %{with_xen} || %{with_libxl}
1919 %defattr(-, root, root)
1921 %endif # %{with_libvirtd}
1925 %defattr(-, root, root)
1927 %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
1929 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
1930 %{_datadir}/augeas/lenses/libvirt_sanlock.aug
1931 %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1932 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock
1933 %{_sbindir}/virt-sanlock-cleanup
1934 %{_mandir}/man8/virt-sanlock-cleanup.8*
1935 %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
1938 %files client -f %{name}.lang
1939 %defattr(-, root, root)
1940 %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
1942 %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
1943 %{_mandir}/man1/virsh.1*
1944 %{_mandir}/man1/virt-xml-validate.1*
1945 %{_mandir}/man1/virt-pki-validate.1*
1946 %{_mandir}/man1/virt-host-validate.1*
1948 %{_bindir}/virt-xml-validate
1949 %{_bindir}/virt-pki-validate
1950 %{_bindir}/virt-host-validate
1951 %{_libdir}/lib*.so.*
1954 %{_datadir}/systemtap/tapset/libvirt_probes*.stp
1955 %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
1956 %{_datadir}/systemtap/tapset/libvirt_functions.stp
1959 %dir %{_datadir}/libvirt/
1960 %dir %{_datadir}/libvirt/schemas/
1962 %{_datadir}/libvirt/schemas/basictypes.rng
1963 %{_datadir}/libvirt/schemas/capability.rng
1964 %{_datadir}/libvirt/schemas/domain.rng
1965 %{_datadir}/libvirt/schemas/domaincommon.rng
1966 %{_datadir}/libvirt/schemas/domainsnapshot.rng
1967 %{_datadir}/libvirt/schemas/interface.rng
1968 %{_datadir}/libvirt/schemas/network.rng
1969 %{_datadir}/libvirt/schemas/networkcommon.rng
1970 %{_datadir}/libvirt/schemas/nodedev.rng
1971 %{_datadir}/libvirt/schemas/nwfilter.rng
1972 %{_datadir}/libvirt/schemas/secret.rng
1973 %{_datadir}/libvirt/schemas/storageencryption.rng
1974 %{_datadir}/libvirt/schemas/storagepool.rng
1975 %{_datadir}/libvirt/schemas/storagevol.rng
1977 %{_datadir}/libvirt/cpu_map.xml
1980 %{_unitdir}/libvirt-guests.service
1982 %{_sysconfdir}/rc.d/init.d/libvirt-guests
1984 %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
1985 %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
1986 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
1989 %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
1993 %defattr(-, root, root)
1996 %dir %{_includedir}/libvirt
1997 %{_includedir}/libvirt/*.h
1998 %{_libdir}/pkgconfig/libvirt.pc
2000 %dir %{_datadir}/libvirt/api/
2001 %{_datadir}/libvirt/api/libvirt-api.xml
2002 %{_datadir}/libvirt/api/libvirt-qemu-api.xml
2003 %{_datadir}/libvirt/api/libvirt-lxc-api.xml
2005 %doc docs/*.html docs/html docs/*.gif
2006 %doc docs/libvirt-api.xml
2007 %doc examples/hellolibvirt
2008 %doc examples/domain-events/events-c
2009 %doc examples/dominfo
2010 %doc examples/domsuspend
2011 %doc examples/openauth
2013 %doc examples/systemtap
2017 %defattr(-, root, root)
2019 %doc AUTHORS NEWS README COPYING.LIB
2020 %{_libdir}/python*/site-packages/libvirt.py*
2021 %{_libdir}/python*/site-packages/libvirt_qemu.py*
2022 %{_libdir}/python*/site-packages/libvirt_lxc.py*
2023 %{_libdir}/python*/site-packages/libvirtmod*
2024 %doc python/tests/*.py
2026 %doc examples/python
2027 %doc examples/domain-events/events-python
2031 * Wed Jan 30 2013 Daniel Veillard <veillard@redhat.com> - 1.0.2-1
2033 - S390 architecture improvement
2034 - Power architecture improvement
2035 - large Coverity report cleanups and associated bug fixes
2036 - virTypedParams* APIs to helps with those data structures
2037 - a lot of bug fixes and overall improvements
2039 * Fri Nov 2 2012 Daniel Veillard <veillard@redhat.com> - 1.0.0-1
2040 - virNodeGetCPUMap: Define public API
2041 - Add systemd journal support
2042 - Add a qemu capabilities cache manager
2043 - USB migration support
2044 - various improvement and fixes when using QMP QEmu interface
2045 - Support for Xen 4.2
2046 - Lot of localization enhancements
2047 - a lot of bug fixes, improvements and portability work
2049 * Mon Sep 24 2012 Daniel Veillard <veillard@redhat.com> - 0.10.2-1
2050 - network: define new API virNetworkUpdate
2051 - add support for QEmu sandbox support
2052 - blockjob: add virDomainBlockCommit
2053 - New APIs to get/set Node memory parameters
2054 - new API virConnectListAllSecrets
2055 - new API virConnectListAllNWFilters
2056 - new API virConnectListAllNodeDevices
2057 - parallels: add support of containers to the driver
2058 - new API virConnectListAllInterfaces
2059 - new API virConnectListAllNetworks
2060 - new API virStoragePoolListAllVolumes
2061 - Add PMSUSPENDED life cycle event
2062 - new API virStorageListAllStoragePools
2063 - Add per-guest S3/S4 state configuration
2064 - qemu: Support for Block Device IO Limits
2065 - a lot of bug fixes, improvements and portability work
2067 * Fri Aug 31 2012 Daniel Veillard <veillard@redhat.com> - 0.10.1-1
2068 - bugfixes and a brown paper bag
2070 * Wed Aug 29 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-1
2071 - agent: add qemuAgentArbitraryCommand() for general qemu agent command
2072 - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
2073 - network: use firewalld instead of iptables, when available
2074 - network: make network driver vlan-aware
2075 - esx: Implement network driver
2076 - driver for parallels hypervisor
2077 - Various LXC improvements
2078 - Add virDomainGetHostname
2079 - a lot of bug fixes, improvements and portability work
2081 * Mon Jul 2 2012 Daniel Veillard <veillard@redhat.com> - 0.9.13-1
2082 - S390: support for s390(x)
2083 - snapshot: implement new APIs for esx and vbox
2084 - snapshot: new query APIs and many improvements
2085 - virsh: Allow users to reedit rejected XML
2086 - nwfilter: add DHCP snooping
2087 - Enable driver modules in libvirt RPM
2088 - Default to enable driver modules for libvirtd
2089 - storage backend: Add RBD (RADOS Block Device) support
2090 - sVirt support for LXC domains inprovement
2091 - a lot of bug fixes, improvements and portability work
2093 * Mon May 14 2012 Daniel Veillard <veillard@redhat.com> - 0.9.12-1
2094 - qemu: allow snapshotting of sheepdog and rbd disks
2095 - blockjob: add new APIs
2096 - a lot of bug fixes, improvements and portability work
2098 * Tue Apr 3 2012 Daniel Veillard <veillard@redhat.com> - 0.9.11-1
2099 - Add support for the suspend event
2100 - Add support for event tray moved of removable disks
2101 - qemu: Support numad
2102 - cpustats: API, improvements and qemu support
2103 - qemu: support type='hostdev' network devices at domain start
2104 - Introduce virDomainPMWakeup API
2105 - network: support Open vSwitch
2106 - a number of snapshot improvements
2107 - many improvements and bug fixes
2109 * Mon Feb 13 2012 Daniel Veillard <veillard@redhat.com> - 0.9.10-1
2110 - Add support for sVirt in the LXC driver
2111 - block rebase: add new API virDomainBlockRebase
2112 - API: Add api to set and get domain metadata
2113 - virDomainGetDiskErrors public API
2114 - conf: add rawio attribute to disk element of domain XML
2115 - Add new public API virDomainGetCPUStats()
2116 - Introduce virDomainPMSuspendForDuration API
2117 - resize: add virStorageVolResize() API
2118 - Add a virt-host-validate command to sanity check HV config
2119 - Add new virDomainShutdownFlags API
2120 - QEMU guest agent support
2121 - many improvements and bug fixes
2123 * Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
2124 - Add API virDomain{S,G}etInterfaceParameters
2125 - Add API virDomain{G, S}etNumaParameters
2126 - Add support for ppc64 qemu
2127 - Support Xen domctl v8
2128 - many improvements and bug fixes
2130 * Thu Dec 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.8-1
2131 - Add support for QEMU 1.0
2132 - Add preliminary PPC cpu driver
2133 - Add new API virDomain{Set, Get}BlockIoTune
2134 - block_resize: Define the new API
2135 - Add a public API to invoke suspend/resume on the host
2136 - various improvements for LXC containers
2137 - Define keepalive protocol and add virConnectIsAlive API
2138 - Add support for STP and VLAN filtering
2139 - many improvements and bug fixes
2141 * Tue Nov 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.7-1
2142 - esx: support vSphere 5.x
2143 - vbox: support for VirtualBox 4.1
2144 - Introduce the virDomainOpenGraphics API
2145 - Add AHCI support to qemu driver
2146 - snapshot: many improvements and 2 new APIs
2147 - api: Add public api for 'reset'
2148 - many improvements and bug fixes
2150 * Thu Sep 22 2011 Daniel Veillard <veillard@redhat.com> - 0.9.6-1
2151 - Fix the qemu reboot bug and a few others bug fixes
2153 * Tue Sep 20 2011 Daniel Veillard <veillard@redhat.com> - 0.9.5-1
2154 - many snapshot improvements (Eric Blake)
2155 - latency: Define new public API and structure (Osier Yang)
2156 - USB2 and various USB improvements (Marc-André Lureau)
2157 - storage: Add fs pool formatting (Osier Yang)
2158 - Add public API for getting migration speed (Jim Fehlig)
2159 - Add basic driver for Microsoft Hyper-V (Matthias Bolte)
2160 - many improvements and bug fixes
2162 * Wed Aug 3 2011 Daniel Veillard <veillard@redhat.com> - 0.9.4-1
2163 - network bandwidth QoS control
2164 - Add new API virDomainBlockPull*
2165 - save: new API to manipulate save file images
2166 - CPU bandwidth limits support
2167 - allow to send NMI and key event to guests
2168 - new API virDomainUndefineFlags
2169 - Implement code to attach to external QEMU instances
2170 - bios: Add support for SGA
2171 - various missing python binding
2172 - many improvements and bug fixes
2174 * Mon Jul 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.3-1
2175 - new API virDomainGetVcpupinInfo
2176 - Add TXT record support for virtual DNS service
2177 - Support reboots with the QEMU driver
2178 - New API virDomainGetControlInfo API
2179 - New API virNodeGetMemoryStats
2180 - New API virNodeGetCPUTime
2181 - New API for send-key
2182 - New API virDomainPinVcpuFlags
2183 - support multifunction PCI device
2184 - lxc: various improvements
2185 - many improvements and bug fixes
2187 * Mon Jun 6 2011 Daniel Veillard <veillard@redhat.com> - 0.9.2-1
2188 - Framework for lock manager plugins
2189 - API for network config change transactions
2190 - flags for setting memory parameters
2191 - virDomainGetState public API
2192 - qemu: allow blkstat/blkinfo calls during migration
2193 - Introduce migration v3 API
2194 - Defining the Screenshot public API
2195 - public API for NMI injection
2196 - Various improvements and bug fixes
2198 * Thu May 5 2011 Daniel Veillard <veillard@redhat.com> - 0.9.1-1
2199 - support various persistent domain updates
2200 - improvements on memory APIs
2201 - Add virDomainEventRebootNew
2202 - various improvements to libxl driver
2203 - Spice: support audio, images and stream compression
2204 - Various improvements and bug fixes
2206 * Mon Apr 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
2207 - Support cputune cpu usage tuning
2208 - Add public APIs for storage volume upload/download
2209 - Add public API for setting migration speed on the fly
2210 - Add libxenlight driver
2211 - qemu: support migration to fd
2212 - libvirt: add virDomain{Get,Set}BlkioParameters
2213 - setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
2214 - Expose event loop implementation as a public API
2215 - Dump the debug buffer to libvirtd.log on fatal signal
2217 - Various improvements and bug fixes
2219 * Thu Feb 17 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-1
2220 - expose new API for sysinfo extraction
2221 - cgroup blkio weight support
2222 - smartcard device support
2223 - qemu: Support per-device boot ordering
2224 - Various improvements and bug fixes
2226 * Tue Jan 4 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
2227 - Preliminary support for VirtualBox 4.0
2229 - Add VMware Workstation and Player driver driver
2230 - Add network disk support
2231 - Various improvements and bug fixes
2233 * Tue Nov 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.6-1
2234 - Add support for iSCSI target auto-discovery
2235 - QED: Basic support for QED images
2236 - remote console support
2237 - support for SPICE graphics
2238 - sysinfo and VMBIOS support
2239 - virsh qemu-monitor-command
2240 - various improvements and bug fixes
2242 * Fri Oct 29 2010 Daniel Veillard <veillard@redhat.com> - 0.8.5-1
2243 - Enable JSON and netdev features in QEMU >= 0.13
2244 - framework for auditing integration
2245 - framework DTrace/SystemTap integration
2246 - Setting the number of vcpu at boot
2247 - Enable support for nested SVM
2248 - Virtio plan9fs filesystem QEMU
2249 - Memory parameter controls
2250 - various improvements and bug fixes
2252 * Fri Sep 10 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
2253 - big improvements to UML driver
2254 - various improvements and bug fixes
2256 * Wed Aug 4 2010 Daniel Veillard <veillard@redhat.com> - 0.8.3-1
2257 - esx: Support vSphere 4.1
2258 - Qemu arbitrary monitor commands
2259 - Qemu Monitor API entry point
2260 - various improvements and bug fixes
2262 * Mon Jul 5 2010 Daniel Veillard <veillard@redhat.com> - 0.8.2-1
2263 - phyp: adding support for IVM
2264 - libvirt: introduce domainCreateWithFlags API
2265 - add 802.1Qbh and 802.1Qbg switches handling
2266 - Support for VirtualBox version 3.2
2267 - Init script for handling guests on shutdown/boot
2268 - qemu: live migration with non-shared storage for kvm
2270 * Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
2271 - Starts dnsmasq from libvirtd with --dhcp-hostsfile
2272 - Add virDomainGetBlockInfo API to query disk sizing
2273 - a lot of bug fixes and cleanups
2275 * Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
2276 - Snapshotting support (QEmu/VBox/ESX)
2277 - Network filtering API
2279 - new APIs for domain events
2280 - Libvirt managed save API
2281 - timer subselection for domain clock
2283 - API to update guest CPU to host CPU
2284 - virDomainUpdateDeviceFlags new API
2285 - migrate max downtime API
2287 - and many bug fixes
2289 * Fri Mar 5 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
2291 - async job handling
2293 - computing baseline CPU
2294 - virDomain{Attach,Detach}DeviceFlags
2295 - assorted bug fixes and lots of cleanups
2297 * Wed Feb 3 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1
2299 * Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
2300 - Add new API virDomainMemoryStats
2301 - Public API and domain extension for CPU flags
2302 - vbox: Add support for version 3.1
2303 - Support QEMU's virtual FAT block device driver
2306 * Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.3-1
2307 - udev node device backend
2308 - API to check object properties
2309 - better QEmu monitor processing
2310 - MAC address based port filtering for qemu
2311 - support IPv6 and multiple addresses per interfaces
2314 * Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
2315 - ESX, VBox driver updates
2317 - support for encrypted (qcow) volume
2318 - compressed save image format for Qemu/KVM
2319 - QEmu host PCI device hotplug support
2320 - configuration of huge pages in guests
2323 * Wed Aug 5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
2324 - ESX, VBox3, Power Hypervisor drivers
2325 - new net filesystem glusterfs
2326 - Storage cloning for LVM and Disk backends
2327 - interface implementation based on netcf
2328 - Support cgroups in QEMU driver
2329 - QEmu hotplug NIC support
2332 * Fri Jul 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.5-1
2335 * Fri May 29 2009 Daniel Veillard <veillard@redhat.com> - 0.6.4-1
2339 * Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1
2343 * Fri Apr 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
2346 * Fri Mar 4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
2349 * Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
2352 * Tue Nov 25 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1
2355 * Tue Sep 23 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-1
2358 * Mon Sep 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-1
2361 * Wed Jun 25 2008 Daniel Veillard <veillard@redhat.com> - 0.4.4-1
2363 - mostly a few bug fixes from 0.4.3
2365 * Thu Jun 12 2008 Daniel Veillard <veillard@redhat.com> - 0.4.3-1
2367 - lots of bug fixes and small improvements
2369 * Tue Apr 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.2-1
2371 - lots of bug fixes and small improvements
2373 * Mon Mar 3 2008 Daniel Veillard <veillard@redhat.com> - 0.4.1-1
2377 - lots of assorted improvements, bugfixes and cleanups
2378 - documentation and localization improvements
2380 * Tue Dec 18 2007 Daniel Veillard <veillard@redhat.com> - 0.4.0-1
2382 - SASL based authentication
2383 - PolicyKit authentication
2384 - improved NUMA and statistics support
2385 - lots of assorted improvements, bugfixes and cleanups
2386 - documentation and localization improvements
2388 * Sun Sep 30 2007 Daniel Veillard <veillard@redhat.com> - 0.3.3-1
2392 - lots of assorted improvements, bugfixes and cleanups
2393 - documentation and localization improvements
2395 * Tue Aug 21 2007 Daniel Veillard <veillard@redhat.com> - 0.3.2-1
2397 - API for domains migration
2398 - APIs for collecting statistics on disks and interfaces
2399 - lots of assorted bugfixes and cleanups
2400 - documentation and localization improvements
2402 * Tue Jul 24 2007 Daniel Veillard <veillard@redhat.com> - 0.3.1-1
2404 - localtime clock support
2405 - PS/2 and USB input devices
2406 - lots of assorted bugfixes and cleanups
2407 - documentation and localization improvements
2409 * Mon Jul 9 2007 Daniel Veillard <veillard@redhat.com> - 0.3.0-1
2411 - Secure remote access support
2412 - unification of daemons
2413 - lots of assorted bugfixes and cleanups
2414 - documentation and localization improvements
2416 * Fri Jun 8 2007 Daniel Veillard <veillard@redhat.com> - 0.2.3-1
2418 - lot of assorted bugfixes and cleanups
2419 - support for Xen-3.1
2422 * Tue Apr 17 2007 Daniel Veillard <veillard@redhat.com> - 0.2.2-1
2424 - lot of assorted bugfixes and cleanups
2425 - preparing for Xen-3.0.5
2427 * Thu Mar 22 2007 Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
2428 - don't require xen; we don't need the daemon and can control non-xen now
2429 - fix scriptlet error (need to own more directories)
2430 - update description text
2432 * Fri Mar 16 2007 Daniel Veillard <veillard@redhat.com> - 0.2.1-1
2434 - lot of bug and portability fixes
2435 - Add support for network autostart and init scripts
2436 - New API to detect the virtualization capabilities of a host
2437 - Documentation updates
2439 * Fri Feb 23 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-4.fc7
2440 - Fix loading of guest & network configs
2442 * Fri Feb 16 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
2443 - Disable kqemu support since its not in Fedora qemu binary
2444 - Fix for -vnc arg syntax change in 0.9.0 QEMU
2446 * Thu Feb 15 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
2447 - Fixed path to qemu daemon for autostart
2448 - Fixed generation of <features> block in XML
2449 - Pre-create config directory at startup
2451 * Wed Feb 14 2007 Daniel Veillard <veillard@redhat.com> 0.2.0-1.fc7
2452 - support for KVM and QEmu
2453 - support for network configuration
2456 * Mon Jan 22 2007 Daniel Veillard <veillard@redhat.com> 0.1.11-1.fc7
2457 - finish inactive Xen domains support
2459 - RelaxNG schemas for XML configs
2461 * Wed Dec 20 2006 Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
2462 - support for inactive Xen domains
2463 - improved support for Xen display and vnc
2465 - localization updates
2467 * Thu Dec 7 2006 Jeremy Katz <katzj@redhat.com> - 0.1.9-2
2468 - rebuild against python 2.5
2470 * Wed Nov 29 2006 Daniel Veillard <veillard@redhat.com> 0.1.9-1
2471 - better error reporting
2472 - python bindings fixes and extensions
2473 - add support for shareable drives
2474 - add support for non-bridge style networking
2475 - hot plug device support
2476 - added support for inactive domains
2477 - API to dump core of domains
2478 - various bug fixes, cleanups and improvements
2479 - updated the localization
2481 * Tue Nov 7 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-3
2482 - it's pkgconfig not pgkconfig !
2484 * Mon Nov 6 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-2
2485 - fixing spec file, added %dist, -devel requires pkgconfig and xen-devel
2486 - Resolves: rhbz#202320
2488 * Mon Oct 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-1
2489 - fix missing page size detection code for ia64
2490 - fix mlock size when getting domain info list from hypervisor
2491 - vcpu number initialization
2492 - don't label crashed domains as shut off
2493 - fix virsh man page
2494 - blktapdd support for alternate drivers like blktap
2495 - memory leak fixes (xend interface and XML parsing)
2497 - mlock/munlock size fixes
2499 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.7-1
2500 - Fix bug when running against xen-3.0.3 hypercalls
2501 - Fix memory bug when getting vcpus info from xend
2503 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.6-1
2504 - Support for localization
2505 - Support for new Xen-3.0.3 cdrom and disk configuration
2506 - Support for setting VNC port
2507 - Fix bug when running against xen-3.0.2 hypercalls
2508 - Fix reconnection problem when talking directly to http xend
2510 * Tue Sep 5 2006 Jeremy Katz <katzj@redhat.com> - 0.1.5-3
2511 - patch from danpb to support new-format cd devices for HVM guests
2513 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-2
2514 - reactivating ia64 support
2516 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-1
2519 - support for new hypervisor calls
2520 - early code for config files and defined domains
2522 * Mon Sep 4 2006 Daniel Berrange <berrange@redhat.com> - 0.1.4-5
2523 - add patch to address dom0_ops API breakage in Xen 3.0.3 tree
2525 * Mon Aug 28 2006 Jeremy Katz <katzj@redhat.com> - 0.1.4-4
2526 - add patch to support paravirt framebuffer in Xen
2528 * Mon Aug 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-3
2529 - another patch to fix network handling in non-HVM guests
2531 * Thu Aug 17 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-2
2532 - patch to fix virParseUUID()
2534 * Wed Aug 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-1
2535 - vCPUs and affinity support
2536 - more complete XML, console and boot options
2537 - specific features support
2538 - enforced read-only connections
2539 - various improvements, bug fixes
2541 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-6
2542 - add patch from pvetere to allow getting uuid from libvirt
2544 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-5
2547 * Thu Jul 27 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-4
2548 - don't BR xen, we just need xen-devel
2550 * Thu Jul 27 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-3
2551 - need rebuild since libxenstore is now versionned
2553 * Mon Jul 24 2006 Mark McLoughlin <markmc@redhat.com> - 0.1.3-2
2554 - Add BuildRequires: xen-devel
2556 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.1.3-1.1
2559 * Tue Jul 11 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-1
2560 - support for HVM Xen guests
2563 * Mon Jul 3 2006 Daniel Veillard <veillard@redhat.com> 0.1.2-1
2564 - added a proxy mechanism for read only access using httpu
2565 - fixed header includes paths
2567 * Wed Jun 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.1-1
2568 - extend and cleanup the driver infrastructure and code
2570 - extend uuid support
2571 - bug fixes, buffer handling cleanups
2572 - support for new Xen hypervisor API
2573 - test driver for unit testing
2574 - virsh --conect argument
2576 * Mon Apr 10 2006 Daniel Veillard <veillard@redhat.com> 0.1.0-1
2578 - new APIs: for Node information and Reboot
2579 - virsh improvements and extensions
2580 - documentation updates and man page
2581 - enhancement and fixes of the XML description format
2583 * Tue Feb 28 2006 Daniel Veillard <veillard@redhat.com> 0.0.6-1
2584 - added error handling APIs
2586 - improve python bindings
2587 - augment documentation and regression tests
2589 * Thu Feb 23 2006 Daniel Veillard <veillard@redhat.com> 0.0.5-1
2590 - new domain creation API
2591 - new UUID based APIs
2592 - more tests, documentation, devhelp
2595 * Fri Feb 10 2006 Daniel Veillard <veillard@redhat.com> 0.0.4-1
2596 - fixes some problems in 0.0.3 due to the change of names
2598 * Wed Feb 8 2006 Daniel Veillard <veillard@redhat.com> 0.0.3-1
2599 - changed library name to libvirt from libvir, complete and test the python
2602 * Sun Jan 29 2006 Daniel Veillard <veillard@redhat.com> 0.0.2-1
2603 - upstream release of 0.0.2, use xend, save and restore added, python bindings
2606 * Wed Nov 2 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1