3 %define mainstream_version 1.0.2
4 %define module_version_varname mainstream_version
7 #libvirt-RPMFLAGS := --without storage-disk --without storage-iscsi --without storage-scsi \
8 # --without storage-fs --without storage-lvm \
9 # --without polkit --without sasl --without audit --with capng --with udev \
10 # --without netcf --without avahi --without sanlock \
11 # --without xen --without qemu --without hyperv --without phyp --without esx \
13 %define _without_storage_disk true
14 %define _without_storage_iscsi true
15 %define _without_storage_fs true
16 %define _without_storage_lvm true
17 %define _without_polkit true
18 %define _without_sasl true
19 %define _without_audit true
20 #interface requires netcf
21 #%define _without_netcf true
22 %define _without_avahi true
23 %define _without_sanlock true
24 %define _without_xen true
25 %define _without_qemu true
26 %define _without_hyperv true
27 %define _without_phyp true
28 %define _without_esx true
29 %define _without_libxl true
31 # If neither fedora nor rhel was defined, try to guess them from %{dist}
32 %if !0%{?rhel} && !0%{?fedora}
33 %{expand:%(echo "%{?dist}" | \
34 sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')}
35 %{expand:%(echo "%{?dist}" | \
36 sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}
39 # Default to skipping autoreconf. Distros can change just this one line
40 # (or provide a command-line override) if they backport any patches that
41 # touch configure.ac or Makefile.am.
42 %{!?enable_autotools:%define enable_autotools 0}
44 # A client only build will create a libvirt.so only containing
45 # the generic RPC driver, and test driver and no libvirtd
46 # Default to a full server + client build
49 # Now turn off server build in certain cases
51 # RHEL-5 builds are client-only for s390, ppc
53 %ifnarch %{ix86} x86_64 ia64
58 # Disable all server side drivers if client only build requested
60 %define server_drivers 0
62 %define server_drivers 1
65 # Always build with dlopen'd modules
66 %define with_driver_modules 1
68 # Now set the defaults for all the important features, independent
69 # of any particular OS
71 # First the daemon itself
72 %define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
73 %define with_avahi 0%{!?_without_avahi:%{server_drivers}}
75 # Then the hypervisor drivers that run in libvirtd
76 %define with_xen 0%{!?_without_xen:%{server_drivers}}
77 %define with_qemu 0%{!?_without_qemu:%{server_drivers}}
78 %define with_lxc 0%{!?_without_lxc:%{server_drivers}}
79 %define with_uml 0%{!?_without_uml:%{server_drivers}}
80 %define with_libxl 0%{!?_without_libxl:%{server_drivers}}
82 %define with_qemu_tcg %{with_qemu}
83 # Change if we ever provide qemu-kvm binaries on non-x86 hosts
85 %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
87 %define qemu_kvm_arches %{ix86} x86_64
90 %ifarch %{qemu_kvm_arches}
91 %define with_qemu_kvm %{with_qemu}
93 %define with_qemu_kvm 0
96 # Then the hypervisor drivers that run outside libvirtd, in libvirt.so
97 %define with_openvz 0%{!?_without_openvz:1}
98 %define with_vbox 0%{!?_without_vbox:1}
99 %define with_vmware 0%{!?_without_vmware:1}
100 %define with_phyp 0%{!?_without_phyp:1}
101 %define with_esx 0%{!?_without_esx:1}
102 %define with_hyperv 0%{!?_without_hyperv:1}
103 %define with_xenapi 0%{!?_without_xenapi:1}
104 %define with_parallels 0%{!?_without_parallels:1}
106 # Then the secondary host drivers, which run inside libvirtd
107 %define with_interface 0%{!?_without_interface:%{server_drivers}}
108 %define with_network 0%{!?_without_network:%{server_drivers}}
109 %define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
110 %define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
111 %define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
112 %define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
113 %define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
114 %if 0%{?fedora} >= 16
115 %define with_storage_rbd 0%{!?_without_storage_rbd:%{server_drivers}}
117 %define with_storage_rbd 0
119 %if 0%{?fedora} >= 17
120 %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:%{server_drivers}}
122 %define with_storage_sheepdog 0
124 %define with_numactl 0%{!?_without_numactl:%{server_drivers}}
125 %define with_selinux 0%{!?_without_selinux:%{server_drivers}}
127 # A few optional bits off by default, we enable later
128 %define with_polkit 0%{!?_without_polkit:0}
129 %define with_capng 0%{!?_without_capng:0}
130 %define with_fuse 0%{!?_without_fuse:0}
131 %define with_netcf 0%{!?_without_netcf:0}
132 %define with_udev 0%{!?_without_udev:0}
133 %define with_hal 0%{!?_without_hal:0}
134 %define with_yajl 0%{!?_without_yajl:0}
135 %define with_nwfilter 0%{!?_without_nwfilter:0}
136 %define with_libpcap 0%{!?_without_libpcap:0}
137 %define with_macvtap 0%{!?_without_macvtap:0}
138 %define with_libnl 0%{!?_without_libnl:0}
139 %define with_audit 0%{!?_without_audit:0}
140 %define with_dtrace 0%{!?_without_dtrace:0}
141 %define with_cgconfig 0%{!?_without_cgconfig:0}
142 %define with_sanlock 0%{!?_without_sanlock:0}
143 %define with_systemd 0%{!?_without_systemd:0}
144 %define with_numad 0%{!?_without_numad:0}
145 %define with_firewalld 0%{!?_without_firewalld:0}
146 %define with_libssh2 0%{!?_without_libssh2:0}
148 # Non-server/HV driver defaults which are always enabled
149 %define with_python 0%{!?_without_python:1}
150 %define with_sasl 0%{!?_without_sasl:1}
153 # Finally set the OS / architecture specific special cases
155 # Xen is available only on i386 x86_64 ia64
156 %ifnarch %{ix86} x86_64 ia64
161 # Numactl is not available on s390[x] and ARM
162 %ifarch s390 s390x %{arm}
163 %define with_numactl 0
166 # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
167 # VMWare, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
170 %define with_openvz 0
174 %define with_vmware 0
175 %define with_xenapi 0
177 %define with_hyperv 0
178 %define with_parallels 0
181 # Fedora 17 / RHEL-7 are first where we use systemd. Although earlier
182 # Fedora has systemd, libvirt still used sysvinit there.
183 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
184 %define with_systemd 1
187 # Fedora 18 / RHEL-7 are first where firewalld support is enabled
188 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
189 %define with_firewalld 1
192 # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
194 %define with_qemu_tcg 0
197 %define with_qemu_kvm 0
202 # RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
203 # on all archs. Other archs all have LXC available though
205 %define with_qemu_tcg 0
208 %define with_qemu_kvm 0
213 # Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
214 %if 0%{?fedora} && 0%{?fedora} < 16
220 # Fedora doesn't have new enough Xen for libxl until F18
221 %if 0%{?fedora} && 0%{?fedora} < 18
225 # PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
226 %if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
227 %define with_polkit 0%{!?_without_polkit:1}
230 # libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
231 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
232 %define with_capng 0%{!?_without_capng:1}
235 # fuse is used to provide virtualized /proc for LXC
236 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
237 %define with_fuse 0%{!?_without_fuse:1}
240 # netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
241 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
242 %define with_netcf 0%{!?_without_netcf:%{server_drivers}}
245 # udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
246 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
247 %define with_udev 0%{!?_without_udev:%{server_drivers}}
249 %define with_hal 0%{!?_without_hal:%{server_drivers}}
252 # interface requires netcf
253 %if ! 0%{?with_netcf}
254 %define with_interface 0
257 # Enable yajl library for JSON mode with QEMU
258 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
259 %define with_yajl 0%{!?_without_yajl:%{server_drivers}}
262 # Enable sanlock library for lock management with QEMU
263 # Sanlock is available only on i686 x86_64 for RHEL
264 %if 0%{?fedora} >= 16
265 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
268 %ifarch %{ix86} x86_64
269 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
273 # Enable libssh2 transport for new enough distros
274 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
275 %define with_libssh2 0%{!?_without_libssh2:1}
278 # Disable some drivers when building without libvirt daemon.
279 # The logic is the same as in configure.ac
280 %if ! %{with_libvirtd}
281 %define with_interface 0
282 %define with_network 0
288 %define with_storage_fs 0
289 %define with_storage_lvm 0
290 %define with_storage_iscsi 0
291 %define with_storage_mpath 0
292 %define with_storage_rbd 0
293 %define with_storage_sheepdog 0
294 %define with_storage_disk 0
297 %if %{with_qemu} || %{with_lxc} || %{with_uml}
298 %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
299 # Enable libpcap library
300 %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
301 %define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
303 # numad is used to manage the CPU and memory placement dynamically,
304 # it's not available on s390[x] and ARM.
305 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
306 %ifnarch s390 s390x %{arm}
307 %define with_numad 0%{!?_without_numad:%{server_drivers}}
316 %if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
317 %define with_audit 0%{!?_without_audit:1}
320 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
321 %define with_dtrace 1
324 # Pull in cgroups config system
325 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
326 %if %{with_qemu} || %{with_lxc}
327 %define with_cgconfig 0%{!?_without_cgconfig:1}
331 %if %{with_udev} || %{with_hal}
332 %define with_nodedev 1
334 %define with_nodedev 0
337 %if %{with_storage_fs} || %{with_storage_mpath} || %{with_storage_iscsi} || %{with_storage_lvm} || %{with_storage_disk}
338 %define with_storage 1
340 %define with_storage 0
344 # Force QEMU to run as non-root
345 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
346 %define qemu_user qemu
347 %define qemu_group qemu
349 %define qemu_user root
350 %define qemu_group root
354 # The RHEL-5 Xen package has some feature backports. This
355 # flag is set to enable use of those special bits on RHEL-5
362 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
363 %define with_systemd_macros 1
365 %define with_systemd_macros 0
369 Summary: Library providing a simple virtualization API
371 Version: %{mainstream_version}
374 Group: Development/Libraries
375 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
376 URL: http://libvirt.org/
378 %if %(echo %{version} | grep -o \\. | wc -l) == 3
379 %define mainturl stable_updates/
381 Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
382 Patch1: libcurl.patch
383 Patch2: libcurl-daemon.patch
384 Patch3: securityselinuxlabeltest.patch
387 Requires: libvirt-daemon = %{version}-%{release}
389 Requires: libvirt-daemon-config-network = %{version}-%{release}
392 Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
394 %if %{with_driver_modules}
396 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
399 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
402 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
405 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
408 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
411 %if %{with_interface}
412 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
414 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
415 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
416 Requires: libvirt-daemon-driver-network = %{version}-%{release}
417 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
418 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
421 Requires: libvirt-client = %{version}-%{release}
423 # All build-time requirements. Run-time requirements are
424 # listed against each sub-RPM
425 %if 0%{?enable_autotools}
426 BuildRequires: autoconf
427 BuildRequires: automake
428 BuildRequires: gettext-devel
429 BuildRequires: libtool
431 BuildRequires: python-devel
433 BuildRequires: systemd-units
436 BuildRequires: xen-devel
438 BuildRequires: libxml2-devel
439 BuildRequires: xhtml1-dtds
440 BuildRequires: libxslt
441 BuildRequires: readline-devel
442 BuildRequires: ncurses-devel
443 BuildRequires: gettext
444 BuildRequires: libtasn1-devel
445 BuildRequires: gnutls-devel
446 BuildRequires: libattr-devel
447 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
448 # for augparse, optionally used in testing
449 BuildRequires: augeas
452 BuildRequires: hal-devel
455 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
456 BuildRequires: systemd-devel >= 185
458 BuildRequires: libudev-devel >= 145
460 BuildRequires: libpciaccess-devel >= 0.10.9
463 BuildRequires: yajl-devel
466 # make sure libvirt is built with new enough sanlock on
467 # distros that have it; required for on_lockfailure
468 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
469 BuildRequires: sanlock-devel >= 2.4
471 BuildRequires: sanlock-devel >= 1.8
475 BuildRequires: libpcap-devel
478 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
479 BuildRequires: libnl3-devel
481 BuildRequires: libnl-devel
485 BuildRequires: avahi-devel
488 BuildRequires: libselinux-devel
491 BuildRequires: dnsmasq >= 2.41
492 BuildRequires: iptables
493 BuildRequires: iptables-ipv6
497 BuildRequires: ebtables
499 BuildRequires: module-init-tools
501 BuildRequires: cyrus-sasl-devel
504 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
505 # Only need the binary, not -devel
506 BuildRequires: polkit >= 0.93
508 BuildRequires: PolicyKit-devel >= 0.6
511 %if %{with_storage_fs}
512 # For mount/umount in FS driver
513 BuildRequires: util-linux
517 BuildRequires: /usr/bin/qemu-img
521 BuildRequires: /usr/sbin/qcow-create
524 %if %{with_storage_lvm}
528 %if %{with_storage_iscsi}
530 BuildRequires: iscsi-initiator-utils
532 %if %{with_storage_disk}
534 BuildRequires: parted-devel
536 # Broken RHEL-5 parted RPM is missing a dep
537 BuildRequires: e2fsprogs-devel
540 %if %{with_storage_mpath}
541 # For Multipath support
543 # Broken RHEL-5 packaging has header files in main RPM :-(
544 BuildRequires: device-mapper
546 BuildRequires: device-mapper-devel
548 %if %{with_storage_rbd}
549 BuildRequires: ceph-devel
553 # For QEMU/LXC numa info
554 BuildRequires: numactl-devel
557 BuildRequires: libcap-ng-devel >= 0.5.0
560 BuildRequires: fuse-devel >= 2.8.6
562 %if %{with_phyp} || %{with_libssh2}
563 BuildRequires: libssh2-devel >= 1.3.0
567 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
568 BuildRequires: netcf-devel >= 0.2.2
570 %if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
571 BuildRequires: netcf-devel >= 0.1.8
573 BuildRequires: netcf-devel >= 0.1.4
578 %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
579 BuildRequires: libcurl-devel
581 BuildRequires: curl-devel
585 BuildRequires: libwsman-devel >= 2.2.3
588 BuildRequires: audit-libs-devel
591 # we need /usr/sbin/dtrace
592 BuildRequires: systemtap-sdt-devel
595 %if %{with_storage_fs}
596 # For mount/umount in FS driver
597 BuildRequires: util-linux
598 # For showmount in FS driver (netfs discovery)
599 BuildRequires: nfs-utils
602 %if %{with_firewalld}
603 # Communication with the firewall daemon uses DBus
604 BuildRequires: dbus-devel
607 # Fedora build root suckage
610 # For storage wiping with different algorithms
617 Provides: bundled(gnulib)
620 Libvirt is a C toolkit to interact with the virtualization capabilities
621 of recent versions of Linux (and other OSes). The main package includes
622 the libvirtd server exporting the virtualization support.
625 Summary: API reference and website documentation
626 Group: Development/Libraries
629 Includes the API reference for the libvirt C library, and a complete
630 copy of the libvirt.org website documentation.
634 Summary: Server side daemon and supporting files for libvirt library
635 Group: Development/Libraries
637 # All runtime requirements for the libvirt package (runtime requrements
638 # for subpackages are listed later in those subpackages)
640 # The client side, i.e. shared libs and virsh are in a subpackage
641 Requires: %{name}-client = %{version}-%{release}
643 # for modprobe of pci devices
644 Requires: module-init-tools
645 # for /sbin/ip & /sbin/tc
655 Requires: dnsmasq >= 2.41
658 %if %{with_network} || %{with_nwfilter}
660 Requires: iptables-ipv6
665 %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)
666 Requires: netcf-libs >= 0.2.2
668 # needed for device enumeration
673 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
674 Requires: systemd >= 185
676 Requires: udev >= 145
680 %if 0%{?fedora} >= 12 || 0%{?rhel} >=6
681 Requires: polkit >= 0.93
683 Requires: PolicyKit >= 0.6
686 %if %{with_storage_fs}
690 # For pool-build probing for existing pools
691 BuildRequires: libblkid-devel >= 2.17
693 %if 0%{?fedora} >= 11
694 Requires: glusterfs-client >= 2.0.1
699 Requires: /usr/bin/qemu-img
700 # For image compression
708 Requires: /usr/sbin/qcow-create
711 %if %{with_storage_lvm}
715 %if %{with_storage_iscsi}
717 Requires: iscsi-initiator-utils
719 %if %{with_storage_disk}
722 Requires: device-mapper
724 %if %{with_storage_mpath}
725 # For multipath support
726 Requires: device-mapper
728 %if %{with_storage_sheepdog}
729 # For Sheepdog support
735 %ifarch %{ix86} x86_64 ia64
736 # For virConnectGetSysinfo
739 # For service management
741 Requires(post): systemd-units
742 Requires(post): systemd-sysv
743 Requires(preun): systemd-units
744 Requires(postun): systemd-units
749 # libvirtd depends on 'messagebus' service
753 Server side daemon required to manage the virtualization capabilities
754 of recent versions of Linux. Requires a hypervisor specific sub-RPM
755 for specific drivers.
758 %package daemon-config-network
759 Summary: Default configuration files for the libvirtd daemon
760 Group: Development/Libraries
762 Requires: libvirt-daemon = %{version}-%{release}
764 %description daemon-config-network
765 Default configuration files for setting up NAT based networking
769 %package daemon-config-nwfilter
770 Summary: Network filter configuration files for the libvirtd daemon
771 Group: Development/Libraries
773 Requires: libvirt-daemon = %{version}-%{release}
775 %description daemon-config-nwfilter
776 Network filter configuration files for cleaning guest traffic
779 %if %{with_driver_modules}
781 %package daemon-driver-network
782 Summary: Network driver plugin for the libvirtd daemon
783 Group: Development/Libraries
784 Requires: libvirt-daemon = %{version}-%{release}
786 %description daemon-driver-network
787 The network driver plugin for the libvirtd daemon, providing
788 an implementation of the virtual network APIs using the Linux
794 %package daemon-driver-nwfilter
795 Summary: Nwfilter driver plugin for the libvirtd daemon
796 Group: Development/Libraries
797 Requires: libvirt-daemon = %{version}-%{release}
799 %description daemon-driver-nwfilter
800 The nwfilter driver plugin for the libvirtd daemon, providing
801 an implementation of the firewall APIs using the ebtables,
802 iptables and ip6tables capabilities
807 %package daemon-driver-nodedev
808 Summary: Nodedev driver plugin for the libvirtd daemon
809 Group: Development/Libraries
810 Requires: libvirt-daemon = %{version}-%{release}
812 %description daemon-driver-nodedev
813 The nodedev driver plugin for the libvirtd daemon, providing
814 an implementation of the node device APIs using the udev
819 %if %{with_interface}
820 %package daemon-driver-interface
821 Summary: Interface driver plugin for the libvirtd daemon
822 Group: Development/Libraries
823 Requires: libvirt-daemon = %{version}-%{release}
825 %description daemon-driver-interface
826 The interface driver plugin for the libvirtd daemon, providing
827 an implementation of the network interface APIs using the
832 %package daemon-driver-secret
833 Summary: Secret driver plugin for the libvirtd daemon
834 Group: Development/Libraries
835 Requires: libvirt-daemon = %{version}-%{release}
837 %description daemon-driver-secret
838 The secret driver plugin for the libvirtd daemon, providing
839 an implementation of the secret key APIs.
843 %package daemon-driver-storage
844 Summary: Storage driver plugin for the libvirtd daemon
845 Group: Development/Libraries
846 Requires: libvirt-daemon = %{version}-%{release}
848 %description daemon-driver-storage
849 The storage driver plugin for the libvirtd daemon, providing
850 an implementation of the storage APIs using LVM, iSCSI,
856 %package daemon-driver-qemu
857 Summary: Qemu driver plugin for the libvirtd daemon
858 Group: Development/Libraries
859 Requires: libvirt-daemon = %{version}-%{release}
860 # There really is a hard cross-driver dependency here
861 Requires: libvirt-daemon-driver-network = %{version}-%{release}
863 %description daemon-driver-qemu
864 The qemu driver plugin for the libvirtd daemon, providing
865 an implementation of the hypervisor driver APIs using
871 %package daemon-driver-lxc
872 Summary: LXC driver plugin for the libvirtd daemon
873 Group: Development/Libraries
874 Requires: libvirt-daemon = %{version}-%{release}
875 # There really is a hard cross-driver dependency here
876 Requires: libvirt-daemon-driver-network = %{version}-%{release}
878 %description daemon-driver-lxc
879 The LXC driver plugin for the libvirtd daemon, providing
880 an implementation of the hypervisor driver APIs using
886 %package daemon-driver-uml
887 Summary: Uml driver plugin for the libvirtd daemon
888 Group: Development/Libraries
889 Requires: libvirt-daemon = %{version}-%{release}
891 %description daemon-driver-uml
892 The UML driver plugin for the libvirtd daemon, providing
893 an implementation of the hypervisor driver APIs using
899 %package daemon-driver-xen
900 Summary: Xen driver plugin for the libvirtd daemon
901 Group: Development/Libraries
902 Requires: libvirt-daemon = %{version}-%{release}
904 %description daemon-driver-xen
905 The Xen driver plugin for the libvirtd daemon, providing
906 an implementation of the hypervisor driver APIs using
912 %package daemon-driver-libxl
913 Summary: Libxl driver plugin for the libvirtd daemon
914 Group: Development/Libraries
915 Requires: libvirt-daemon = %{version}-%{release}
917 %description daemon-driver-libxl
918 The Libxl driver plugin for the libvirtd daemon, providing
919 an implementation of the hypervisor driver APIs using
922 %endif # %{with_driver_modules}
928 Summary: Server side daemon & driver required to run QEMU guests
929 Group: Development/Libraries
931 Requires: libvirt-daemon = %{version}-%{release}
932 %if %{with_driver_modules}
933 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
934 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
935 Requires: libvirt-daemon-driver-network = %{version}-%{release}
936 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
937 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
938 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
939 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
943 %description daemon-qemu
944 Server side daemon and driver required to manage the virtualization
945 capabilities of the QEMU TCG emulators
951 Summary: Server side daemon & driver required to run KVM guests
952 Group: Development/Libraries
954 Requires: libvirt-daemon = %{version}-%{release}
955 %if %{with_driver_modules}
956 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
957 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
958 Requires: libvirt-daemon-driver-network = %{version}-%{release}
959 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
960 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
961 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
962 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
966 %description daemon-kvm
967 Server side daemon and driver required to manage the virtualization
968 capabilities of the KVM hypervisor
974 Summary: Server side daemon & driver required to run LXC guests
975 Group: Development/Libraries
977 Requires: libvirt-daemon = %{version}-%{release}
978 %if %{with_driver_modules}
979 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
980 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
981 Requires: libvirt-daemon-driver-network = %{version}-%{release}
982 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
983 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
984 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
985 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
988 %description daemon-lxc
989 Server side daemon and driver required to manage the virtualization
996 Summary: Server side daemon & driver required to run UML guests
997 Group: Development/Libraries
999 Requires: libvirt-daemon = %{version}-%{release}
1000 %if %{with_driver_modules}
1001 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
1002 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1003 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1004 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1005 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1006 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1007 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1009 # There are no UML kernel RPMs in Fedora/RHEL to depend on.
1011 %description daemon-uml
1012 Server side daemon and driver required to manage the virtualization
1017 %if %{with_xen} || %{with_libxl}
1019 Summary: Server side daemon & driver required to run XEN guests
1020 Group: Development/Libraries
1022 Requires: libvirt-daemon = %{version}-%{release}
1023 %if %{with_driver_modules}
1025 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
1028 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
1030 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1031 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1032 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1033 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1034 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1035 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1039 %description daemon-xen
1040 Server side daemon and driver required to manage the virtualization
1043 %endif # %{with_libvirtd}
1046 Summary: Client side library and utilities of the libvirt library
1047 Group: Development/Libraries
1050 # So remote clients can access libvirt over SSH tunnel
1051 # (client invokes 'nc' against the UNIX socket on the server)
1053 # Needed by libvirt-guests init script.
1055 # Needed by virt-pki-validate script.
1056 Requires: gnutls-utils
1057 # Needed for probing the power management features of the host.
1060 Requires: cyrus-sasl
1061 # Not technically required, but makes 'out-of-box' config
1062 # work correctly & doesn't have onerous dependencies
1063 Requires: cyrus-sasl-md5
1067 Shared libraries and client binaries needed to access to the
1068 virtualization capabilities of recent versions of Linux (and other OSes).
1071 Summary: Libraries, includes, etc. to compile with the libvirt library
1072 Group: Development/Libraries
1073 Requires: %{name}-client = %{version}-%{release}
1074 Requires: %{name}-docs = %{version}-%{release}
1078 Include header files & development libraries for the libvirt C library.
1081 %package lock-sanlock
1082 Summary: Sanlock lock manager plugin for QEMU driver
1083 Group: Development/Libraries
1084 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
1085 Requires: sanlock >= 2.4
1087 Requires: sanlock >= 1.8
1089 #for virt-sanlock-cleanup require augeas
1091 Requires: %{name}-daemon = %{version}-%{release}
1092 Requires: %{name}-client = %{version}-%{release}
1094 %description lock-sanlock
1095 Includes the Sanlock lock manager plugin for the QEMU
1101 Summary: Python bindings for the libvirt library
1102 Group: Development/Libraries
1103 Requires: %{name}-client = %{version}-%{release}
1106 The libvirt-python package contains a module that permits applications
1107 written in the Python programming language to use the interface
1108 supplied by the libvirt library to use the virtualization capabilities
1109 of recent versions of Linux (and other OSes).
1120 %define _without_xen --without-xen
1124 %define _without_qemu --without-qemu
1127 %if ! %{with_openvz}
1128 %define _without_openvz --without-openvz
1132 %define _without_lxc --without-lxc
1136 %define _without_vbox --without-vbox
1139 %if ! %{with_xenapi}
1140 %define _without_xenapi --without-xenapi
1144 %define _without_libxl --without-libxl
1148 %define _without_sasl --without-sasl
1152 %define _without_avahi --without-avahi
1156 %define _without_phyp --without-phyp
1160 %define _without_esx --without-esx
1163 %if ! %{with_hyperv}
1164 %define _without_hyperv --without-hyperv
1167 %if ! %{with_vmware}
1168 %define _without_vmware --without-vmware
1171 %if ! %{with_parallels}
1172 %define _without_parallels --without-parallels
1175 %if ! %{with_polkit}
1176 %define _without_polkit --without-polkit
1179 %if ! %{with_python}
1180 %define _without_python --without-python
1183 %if ! %{with_libvirtd}
1184 %define _without_libvirtd --without-libvirtd
1188 %define _without_uml --without-uml
1192 %define _with_rhel5_api --with-rhel5-api
1195 %if ! %{with_interface}
1196 %define _without_interface --without-interface
1199 %if ! %{with_network}
1200 %define _without_network --without-network
1203 %if ! %{with_storage_fs}
1204 %define _without_storage_fs --without-storage-fs
1207 %if ! %{with_storage_lvm}
1208 %define _without_storage_lvm --without-storage-lvm
1211 %if ! %{with_storage_iscsi}
1212 %define _without_storage_iscsi --without-storage-iscsi
1215 %if ! %{with_storage_disk}
1216 %define _without_storage_disk --without-storage-disk
1219 %if ! %{with_storage_mpath}
1220 %define _without_storage_mpath --without-storage-mpath
1223 %if ! %{with_storage_rbd}
1224 %define _without_storage_rbd --without-storage-rbd
1227 %if ! %{with_storage_sheepdog}
1228 %define _without_storage_sheepdog --without-storage-sheepdog
1231 %if ! %{with_numactl}
1232 %define _without_numactl --without-numactl
1236 %define _without_numad --without-numad
1240 %define _without_capng --without-capng
1244 %define _without_fuse --without-fuse
1248 %define _without_netcf --without-netcf
1251 %if ! %{with_selinux}
1252 %define _without_selinux --without-selinux
1256 %define _without_hal --without-hal
1260 %define _without_udev --without-udev
1264 %define _without_yajl --without-yajl
1267 %if ! %{with_sanlock}
1268 %define _without_sanlock --without-sanlock
1271 %if ! %{with_libpcap}
1272 %define _without_libpcap --without-libpcap
1275 %if ! %{with_macvtap}
1276 %define _without_macvtap --without-macvtap
1280 %define _without_audit --without-audit
1283 %if ! %{with_dtrace}
1284 %define _without_dtrace --without-dtrace
1287 %if ! %{with_driver_modules}
1288 %define _without_driver_modules --without-driver-modules
1291 %if %{with_firewalld}
1292 %define _with_firewalld --with-firewalld
1295 %define when %(date +"%%F-%%T")
1296 %define where %(hostname)
1297 %define who %{?packager}%{!?packager:Unknown}
1298 %define with_packager --with-packager="%{who}, %{when}, %{where}"
1299 %define with_packager_version --with-packager-version="%{release}"
1302 %define init_scripts --with-init_script=systemd
1304 %define init_scripts --with-init_script=redhat
1307 %if 0%{?enable_autotools}
1312 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
1313 %define with_selinux_mount --with-selinux-mount="/sys/fs/selinux"
1315 %define with_selinux_mount --with-selinux-mount="/selinux"
1320 %configure %{?_without_xen} \
1322 %{?_without_openvz} \
1325 %{?_without_libxl} \
1326 %{?_without_xenapi} \
1328 %{?_without_avahi} \
1329 %{?_without_polkit} \
1330 %{?_without_python} \
1331 %{?_without_libvirtd} \
1335 %{?_without_hyperv} \
1336 %{?_without_vmware} \
1337 %{?_without_parallels} \
1338 %{?_without_interface} \
1339 %{?_without_network} \
1340 %{?_with_rhel5_api} \
1341 %{?_without_storage_fs} \
1342 %{?_without_storage_lvm} \
1343 %{?_without_storage_iscsi} \
1344 %{?_without_storage_disk} \
1345 %{?_without_storage_mpath} \
1346 %{?_without_storage_rbd} \
1347 %{?_without_storage_sheepdog} \
1348 %{?_without_numactl} \
1349 %{?_without_numad} \
1350 %{?_without_capng} \
1352 %{?_without_netcf} \
1353 %{?_without_selinux} \
1354 %{?_with_selinux_mount} \
1358 %{?_without_sanlock} \
1359 %{?_without_libpcap} \
1360 %{?_without_macvtap} \
1361 %{?_without_audit} \
1362 %{?_without_dtrace} \
1363 %{?_without_driver_modules} \
1364 %{?_with_firewalld} \
1366 %{with_packager_version} \
1367 --with-qemu-user=%{qemu_user} \
1368 --with-qemu-group=%{qemu_group} \
1370 make %{?_smp_mflags}
1376 %makeinstall SYSTEMD_UNIT_DIR=%{buildroot}%{_unitdir}
1377 for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap
1379 (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
1381 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
1382 rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
1383 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
1384 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
1385 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
1386 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
1387 %if %{with_driver_modules}
1388 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
1389 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
1393 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
1394 # We don't want to install /etc/libvirt/qemu/networks in the main %files list
1395 # because if the admin wants to delete the default network completely, we don't
1396 # want to end up re-incarnating it on every RPM upgrade.
1397 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
1398 cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
1399 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1400 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1401 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1402 # Strip auto-generated UUID - we need it generated per-install
1403 sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1405 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1406 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1409 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
1410 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1414 %if ! %{with_sanlock}
1415 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
1416 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1420 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
1421 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1424 %if ! %{with_python}
1425 rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
1427 rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}/examples
1431 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
1432 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
1435 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
1436 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
1439 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
1442 mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} \
1443 $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
1446 %ifarch %{power64} s390x x86_64 ia64 alpha sparc64
1447 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
1448 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
1449 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
1450 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
1454 %if 0%{?fedora} < 14 && 0%{?rhel} < 6
1455 rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
1464 # These tests don't current work in a mock build root
1465 for i in nodeinfotest seclabeltest
1468 printf 'int main(void) { return 0; }' > $i.c
1469 printf '#!/bin/sh\nexit 0\n' > $i
1474 %if %{with_libvirtd}
1476 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1477 # Normally 'setup' adds this in /etc/passwd, but this is
1478 # here for case of upgrades from earlier Fedora/RHEL. This
1479 # UID/GID pair is reserved for qemu:qemu
1480 getent group kvm >/dev/null || groupadd -g 36 -r kvm
1481 getent group qemu >/dev/null || groupadd -g 107 -r qemu
1482 getent passwd qemu >/dev/null || \
1483 useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
1490 # All newly defined networks will have a mac address for the bridge
1491 # auto-generated, but networks already existing at the time of upgrade
1492 # will not. We need to go through all the network configs, look for
1493 # those that don't have a mac address, and add one.
1495 network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \
1496 grep -L "mac address" *.xml; \
1497 cd %{_sysconfdir}/libvirt/qemu/networks && \
1498 grep -L "mac address" *.xml) 2>/dev/null \
1501 for file in $network_files
1503 # each file exists in either the config or state directory (or both) and
1504 # does not have a mac address specified in either. We add the same mac
1505 # address to both files (or just one, if the other isn't there)
1507 mac4=`printf '%X' $(($RANDOM % 256))`
1508 mac5=`printf '%X' $(($RANDOM % 256))`
1509 mac6=`printf '%X' $(($RANDOM % 256))`
1510 for dir in %{_localstatedir}/lib/libvirt/network \
1511 %{_sysconfdir}/libvirt/qemu/networks
1513 if test -f $dir/$file
1516 "s|\(<bridge.*$\)|\0\n <mac address='52:54:00:$mac4:$mac5:$mac6'/>|" \
1520 echo "failed to add <mac address='52:54:00:$mac4:$mac5:$mac6'/>" \
1522 mv -f $dir/$file.orig $dir/$file
1524 rm -f $dir/$file.orig
1532 %if %{with_systemd_macros}
1533 %systemd_post libvirtd.service
1535 if [ $1 -eq 1 ] ; then
1536 # Initial installation
1537 /bin/systemctl enable virtlockd.socket >/dev/null 2>&1 || :
1538 /bin/systemctl enable libvirtd.service >/dev/null 2>&1 || :
1542 %if %{with_cgconfig}
1543 # Starting with Fedora 16/RHEL-7, systemd automounts all cgroups,
1544 # and cgconfig is no longer a necessary service.
1545 %if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 16)
1546 if [ "$1" -eq "1" ]; then
1547 /sbin/chkconfig cgconfig on
1552 /sbin/chkconfig --add libvirtd
1553 if [ "$1" -ge "1" ]; then
1554 /sbin/service libvirtd condrestart > /dev/null 2>&1
1560 %if %{with_systemd_macros}
1561 %systemd_preun libvirtd.service
1563 if [ $1 -eq 0 ] ; then
1564 # Package removal, not upgrade
1565 /bin/systemctl --no-reload disable virtlockd.socket > /dev/null 2>&1 || :
1566 /bin/systemctl --no-reload disable libvirtd.service > /dev/null 2>&1 || :
1567 /bin/systemctl stop libvirtd.service > /dev/null 2>&1 || :
1568 /bin/systemctl stop virtlockd.service > /dev/null 2>&1 || :
1573 /sbin/service libvirtd stop 1>/dev/null 2>&1
1574 /sbin/chkconfig --del libvirtd
1580 %if %{with_systemd_macros}
1581 %systemd_postun_with_restart libvirtd.service
1583 /bin/systemctl daemon-reload >/dev/null 2>&1 || :
1584 if [ $1 -ge 1 ] ; then
1585 # Package upgrade, not uninstall
1586 /bin/systemctl status virtlockd.service >/dev/null 2>&1
1587 if [ $? = 1 ] ; then
1588 /bin/systemctl kill --signal=USR1 virtlockd.service >/dev/null 2>&1 || :
1590 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1596 %post daemon-config-network
1597 if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
1598 UUID=`/usr/bin/uuidgen`
1599 sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
1600 < %{_datadir}/libvirt/networks/default.xml \
1601 > %{_sysconfdir}/libvirt/qemu/networks/default.xml
1602 ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1607 %triggerun -- libvirt < 0.9.4
1608 %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
1610 # If the package is allowed to autostart:
1611 /bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||:
1613 # Run these because the SysV package being removed won't do them
1614 /sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
1615 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1617 %endif # %{with_libvirtd}
1622 %if %{with_systemd_macros}
1623 %systemd_preun libvirt-guests.service
1627 /sbin/chkconfig --del libvirt-guests
1628 rm -f /var/lib/libvirt/libvirt-guests
1636 %if %{with_systemd_macros}
1637 %systemd_post libvirt-guests.service
1640 /sbin/chkconfig --add libvirt-guests
1647 %if %{with_systemd_macros}
1648 %systemd_postun_with_restart libvirt-guests.service
1650 %triggerun client -- libvirt < 0.9.4
1651 %{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
1653 # If the package is allowed to autostart:
1654 /bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||:
1656 # Run these because the SysV package being removed won't do them
1657 /sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || :
1658 /bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
1663 if getent group sanlock > /dev/null ; then
1664 chmod 0770 %{_localstatedir}/lib/libvirt/sanlock
1665 chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock
1670 %defattr(-, root, root)
1673 %defattr(-, root, root)
1675 %dir %{_datadir}/doc/libvirt-docs-%{version}
1676 %dir %{_datadir}/doc/libvirt-docs-%{version}/html
1677 %{_datadir}/doc/libvirt-docs-%{version}/html/*
1680 %dir %{_datadir}/gtk-doc/html/libvirt/
1681 %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
1682 %doc %{_datadir}/gtk-doc/html/libvirt/*.html
1683 %doc %{_datadir}/gtk-doc/html/libvirt/*.png
1684 %doc %{_datadir}/gtk-doc/html/libvirt/*.css
1686 %if %{with_libvirtd}
1688 %defattr(-, root, root)
1690 %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
1691 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
1694 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
1695 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
1696 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
1699 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
1702 %{_unitdir}/libvirtd.service
1703 %{_unitdir}/virtlockd.service
1704 %{_unitdir}/virtlockd.socket
1706 %{_sysconfdir}/rc.d/init.d/libvirtd
1707 %{_sysconfdir}/rc.d/init.d/virtlockd
1709 %doc daemon/libvirtd.upstart
1710 %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
1711 %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
1712 %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
1713 %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
1714 %config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
1716 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
1717 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
1718 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
1720 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
1723 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
1725 %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
1726 %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
1727 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
1730 %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
1731 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
1734 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
1737 %dir %{_datadir}/libvirt/
1740 %dir %{_datadir}/libvirt/networks/
1741 %{_datadir}/libvirt/networks/default.xml
1744 %ghost %dir %{_localstatedir}/run/libvirt/
1746 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
1747 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
1748 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
1749 %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
1752 %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
1753 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
1754 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
1757 %ghost %dir %{_localstatedir}/run/libvirt/lxc/
1758 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
1761 %ghost %dir %{_localstatedir}/run/libvirt/uml/
1762 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
1765 %ghost %dir %{_localstatedir}/run/libvirt/libxl/
1766 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
1769 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
1772 %ghost %dir %{_localstatedir}/run/libvirt/network/
1773 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
1774 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
1777 %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
1778 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
1781 %{_datadir}/augeas/lenses/libvirtd_qemu.aug
1782 %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1786 %{_datadir}/augeas/lenses/libvirtd_lxc.aug
1787 %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1790 %{_datadir}/augeas/lenses/libvirtd.aug
1791 %{_datadir}/augeas/lenses/tests/test_libvirtd.aug
1792 %{_datadir}/augeas/lenses/libvirt_lockd.aug
1793 %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
1796 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1797 %{_datadir}/polkit-1/actions/org.libvirt.unix.policy
1799 %{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
1803 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
1806 %attr(0755, root, root) %{_libexecdir}/libvirt_lxc
1809 %if %{with_storage_disk}
1810 %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
1813 %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
1814 %attr(0755, root, root) %{_sbindir}/libvirtd
1815 %attr(0755, root, root) %{_sbindir}/virtlockd
1817 %{_mandir}/man8/libvirtd.8*
1819 %if %{with_driver_modules}
1821 %files daemon-config-network
1822 %defattr(-, root, root)
1825 %if %{with_nwfilter}
1826 %files daemon-config-nwfilter
1827 %defattr(-, root, root)
1828 %{_sysconfdir}/libvirt/nwfilter/*.xml
1831 %if %{with_interface}
1832 %files daemon-driver-interface
1833 %defattr(-, root, root)
1834 %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
1838 %files daemon-driver-network
1839 %defattr(-, root, root)
1840 %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
1844 %files daemon-driver-nodedev
1845 %defattr(-, root, root)
1846 %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
1849 %if %{with_nwfilter}
1850 %files daemon-driver-nwfilter
1851 %defattr(-, root, root)
1852 %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
1855 %files daemon-driver-secret
1856 %defattr(-, root, root)
1857 %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
1860 %files daemon-driver-storage
1861 %defattr(-, root, root)
1862 %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
1866 %files daemon-driver-qemu
1867 %defattr(-, root, root)
1868 %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
1872 %files daemon-driver-lxc
1873 %defattr(-, root, root)
1874 %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
1878 %files daemon-driver-uml
1879 %defattr(-, root, root)
1880 %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so
1884 %files daemon-driver-xen
1885 %defattr(-, root, root)
1886 %{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so
1890 %files daemon-driver-libxl
1891 %defattr(-, root, root)
1892 %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
1894 %endif # %{with_driver_modules}
1896 %if %{with_qemu_tcg}
1898 %defattr(-, root, root)
1901 %if %{with_qemu_kvm}
1903 %defattr(-, root, root)
1908 %defattr(-, root, root)
1913 %defattr(-, root, root)
1916 %if %{with_xen} || %{with_libxl}
1918 %defattr(-, root, root)
1920 %endif # %{with_libvirtd}
1924 %defattr(-, root, root)
1926 %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
1928 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
1929 %{_datadir}/augeas/lenses/libvirt_sanlock.aug
1930 %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1931 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock
1932 %{_sbindir}/virt-sanlock-cleanup
1933 %{_mandir}/man8/virt-sanlock-cleanup.8*
1934 %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
1937 %files client -f %{name}.lang
1938 %defattr(-, root, root)
1939 %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
1941 %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
1942 %{_mandir}/man1/virsh.1*
1943 %{_mandir}/man1/virt-xml-validate.1*
1944 %{_mandir}/man1/virt-pki-validate.1*
1945 %{_mandir}/man1/virt-host-validate.1*
1947 %{_bindir}/virt-xml-validate
1948 %{_bindir}/virt-pki-validate
1949 %{_bindir}/virt-host-validate
1950 %{_libdir}/lib*.so.*
1953 %{_datadir}/systemtap/tapset/libvirt_probes*.stp
1954 %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
1955 %{_datadir}/systemtap/tapset/libvirt_functions.stp
1958 %dir %{_datadir}/libvirt/
1959 %dir %{_datadir}/libvirt/schemas/
1961 %{_datadir}/libvirt/schemas/basictypes.rng
1962 %{_datadir}/libvirt/schemas/capability.rng
1963 %{_datadir}/libvirt/schemas/domain.rng
1964 %{_datadir}/libvirt/schemas/domaincommon.rng
1965 %{_datadir}/libvirt/schemas/domainsnapshot.rng
1966 %{_datadir}/libvirt/schemas/interface.rng
1967 %{_datadir}/libvirt/schemas/network.rng
1968 %{_datadir}/libvirt/schemas/networkcommon.rng
1969 %{_datadir}/libvirt/schemas/nodedev.rng
1970 %{_datadir}/libvirt/schemas/nwfilter.rng
1971 %{_datadir}/libvirt/schemas/secret.rng
1972 %{_datadir}/libvirt/schemas/storageencryption.rng
1973 %{_datadir}/libvirt/schemas/storagepool.rng
1974 %{_datadir}/libvirt/schemas/storagevol.rng
1976 %{_datadir}/libvirt/cpu_map.xml
1979 %{_unitdir}/libvirt-guests.service
1981 %{_sysconfdir}/rc.d/init.d/libvirt-guests
1983 %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
1984 %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
1985 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
1988 %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
1992 %defattr(-, root, root)
1995 %dir %{_includedir}/libvirt
1996 %{_includedir}/libvirt/*.h
1997 %{_libdir}/pkgconfig/libvirt.pc
1999 %dir %{_datadir}/libvirt/api/
2000 %{_datadir}/libvirt/api/libvirt-api.xml
2001 %{_datadir}/libvirt/api/libvirt-qemu-api.xml
2002 %{_datadir}/libvirt/api/libvirt-lxc-api.xml
2004 %doc docs/*.html docs/html docs/*.gif
2005 %doc docs/libvirt-api.xml
2006 %doc examples/hellolibvirt
2007 %doc examples/domain-events/events-c
2008 %doc examples/dominfo
2009 %doc examples/domsuspend
2010 %doc examples/openauth
2012 %doc examples/systemtap
2016 %defattr(-, root, root)
2018 %doc AUTHORS NEWS README COPYING.LIB
2019 %{_libdir}/python*/site-packages/libvirt.py*
2020 %{_libdir}/python*/site-packages/libvirt_qemu.py*
2021 %{_libdir}/python*/site-packages/libvirt_lxc.py*
2022 %{_libdir}/python*/site-packages/libvirtmod*
2023 %doc python/tests/*.py
2025 %doc examples/python
2026 %doc examples/domain-events/events-python
2030 * Wed Jan 30 2013 Daniel Veillard <veillard@redhat.com> - 1.0.2-1
2032 - S390 architecture improvement
2033 - Power architecture improvement
2034 - large Coverity report cleanups and associated bug fixes
2035 - virTypedParams* APIs to helps with those data structures
2036 - a lot of bug fixes and overall improvements
2038 * Fri Nov 2 2012 Daniel Veillard <veillard@redhat.com> - 1.0.0-1
2039 - virNodeGetCPUMap: Define public API
2040 - Add systemd journal support
2041 - Add a qemu capabilities cache manager
2042 - USB migration support
2043 - various improvement and fixes when using QMP QEmu interface
2044 - Support for Xen 4.2
2045 - Lot of localization enhancements
2046 - a lot of bug fixes, improvements and portability work
2048 * Mon Sep 24 2012 Daniel Veillard <veillard@redhat.com> - 0.10.2-1
2049 - network: define new API virNetworkUpdate
2050 - add support for QEmu sandbox support
2051 - blockjob: add virDomainBlockCommit
2052 - New APIs to get/set Node memory parameters
2053 - new API virConnectListAllSecrets
2054 - new API virConnectListAllNWFilters
2055 - new API virConnectListAllNodeDevices
2056 - parallels: add support of containers to the driver
2057 - new API virConnectListAllInterfaces
2058 - new API virConnectListAllNetworks
2059 - new API virStoragePoolListAllVolumes
2060 - Add PMSUSPENDED life cycle event
2061 - new API virStorageListAllStoragePools
2062 - Add per-guest S3/S4 state configuration
2063 - qemu: Support for Block Device IO Limits
2064 - a lot of bug fixes, improvements and portability work
2066 * Fri Aug 31 2012 Daniel Veillard <veillard@redhat.com> - 0.10.1-1
2067 - bugfixes and a brown paper bag
2069 * Wed Aug 29 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-1
2070 - agent: add qemuAgentArbitraryCommand() for general qemu agent command
2071 - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
2072 - network: use firewalld instead of iptables, when available
2073 - network: make network driver vlan-aware
2074 - esx: Implement network driver
2075 - driver for parallels hypervisor
2076 - Various LXC improvements
2077 - Add virDomainGetHostname
2078 - a lot of bug fixes, improvements and portability work
2080 * Mon Jul 2 2012 Daniel Veillard <veillard@redhat.com> - 0.9.13-1
2081 - S390: support for s390(x)
2082 - snapshot: implement new APIs for esx and vbox
2083 - snapshot: new query APIs and many improvements
2084 - virsh: Allow users to reedit rejected XML
2085 - nwfilter: add DHCP snooping
2086 - Enable driver modules in libvirt RPM
2087 - Default to enable driver modules for libvirtd
2088 - storage backend: Add RBD (RADOS Block Device) support
2089 - sVirt support for LXC domains inprovement
2090 - a lot of bug fixes, improvements and portability work
2092 * Mon May 14 2012 Daniel Veillard <veillard@redhat.com> - 0.9.12-1
2093 - qemu: allow snapshotting of sheepdog and rbd disks
2094 - blockjob: add new APIs
2095 - a lot of bug fixes, improvements and portability work
2097 * Tue Apr 3 2012 Daniel Veillard <veillard@redhat.com> - 0.9.11-1
2098 - Add support for the suspend event
2099 - Add support for event tray moved of removable disks
2100 - qemu: Support numad
2101 - cpustats: API, improvements and qemu support
2102 - qemu: support type='hostdev' network devices at domain start
2103 - Introduce virDomainPMWakeup API
2104 - network: support Open vSwitch
2105 - a number of snapshot improvements
2106 - many improvements and bug fixes
2108 * Mon Feb 13 2012 Daniel Veillard <veillard@redhat.com> - 0.9.10-1
2109 - Add support for sVirt in the LXC driver
2110 - block rebase: add new API virDomainBlockRebase
2111 - API: Add api to set and get domain metadata
2112 - virDomainGetDiskErrors public API
2113 - conf: add rawio attribute to disk element of domain XML
2114 - Add new public API virDomainGetCPUStats()
2115 - Introduce virDomainPMSuspendForDuration API
2116 - resize: add virStorageVolResize() API
2117 - Add a virt-host-validate command to sanity check HV config
2118 - Add new virDomainShutdownFlags API
2119 - QEMU guest agent support
2120 - many improvements and bug fixes
2122 * Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
2123 - Add API virDomain{S,G}etInterfaceParameters
2124 - Add API virDomain{G, S}etNumaParameters
2125 - Add support for ppc64 qemu
2126 - Support Xen domctl v8
2127 - many improvements and bug fixes
2129 * Thu Dec 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.8-1
2130 - Add support for QEMU 1.0
2131 - Add preliminary PPC cpu driver
2132 - Add new API virDomain{Set, Get}BlockIoTune
2133 - block_resize: Define the new API
2134 - Add a public API to invoke suspend/resume on the host
2135 - various improvements for LXC containers
2136 - Define keepalive protocol and add virConnectIsAlive API
2137 - Add support for STP and VLAN filtering
2138 - many improvements and bug fixes
2140 * Tue Nov 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.7-1
2141 - esx: support vSphere 5.x
2142 - vbox: support for VirtualBox 4.1
2143 - Introduce the virDomainOpenGraphics API
2144 - Add AHCI support to qemu driver
2145 - snapshot: many improvements and 2 new APIs
2146 - api: Add public api for 'reset'
2147 - many improvements and bug fixes
2149 * Thu Sep 22 2011 Daniel Veillard <veillard@redhat.com> - 0.9.6-1
2150 - Fix the qemu reboot bug and a few others bug fixes
2152 * Tue Sep 20 2011 Daniel Veillard <veillard@redhat.com> - 0.9.5-1
2153 - many snapshot improvements (Eric Blake)
2154 - latency: Define new public API and structure (Osier Yang)
2155 - USB2 and various USB improvements (Marc-André Lureau)
2156 - storage: Add fs pool formatting (Osier Yang)
2157 - Add public API for getting migration speed (Jim Fehlig)
2158 - Add basic driver for Microsoft Hyper-V (Matthias Bolte)
2159 - many improvements and bug fixes
2161 * Wed Aug 3 2011 Daniel Veillard <veillard@redhat.com> - 0.9.4-1
2162 - network bandwidth QoS control
2163 - Add new API virDomainBlockPull*
2164 - save: new API to manipulate save file images
2165 - CPU bandwidth limits support
2166 - allow to send NMI and key event to guests
2167 - new API virDomainUndefineFlags
2168 - Implement code to attach to external QEMU instances
2169 - bios: Add support for SGA
2170 - various missing python binding
2171 - many improvements and bug fixes
2173 * Mon Jul 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.3-1
2174 - new API virDomainGetVcpupinInfo
2175 - Add TXT record support for virtual DNS service
2176 - Support reboots with the QEMU driver
2177 - New API virDomainGetControlInfo API
2178 - New API virNodeGetMemoryStats
2179 - New API virNodeGetCPUTime
2180 - New API for send-key
2181 - New API virDomainPinVcpuFlags
2182 - support multifunction PCI device
2183 - lxc: various improvements
2184 - many improvements and bug fixes
2186 * Mon Jun 6 2011 Daniel Veillard <veillard@redhat.com> - 0.9.2-1
2187 - Framework for lock manager plugins
2188 - API for network config change transactions
2189 - flags for setting memory parameters
2190 - virDomainGetState public API
2191 - qemu: allow blkstat/blkinfo calls during migration
2192 - Introduce migration v3 API
2193 - Defining the Screenshot public API
2194 - public API for NMI injection
2195 - Various improvements and bug fixes
2197 * Thu May 5 2011 Daniel Veillard <veillard@redhat.com> - 0.9.1-1
2198 - support various persistent domain updates
2199 - improvements on memory APIs
2200 - Add virDomainEventRebootNew
2201 - various improvements to libxl driver
2202 - Spice: support audio, images and stream compression
2203 - Various improvements and bug fixes
2205 * Mon Apr 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
2206 - Support cputune cpu usage tuning
2207 - Add public APIs for storage volume upload/download
2208 - Add public API for setting migration speed on the fly
2209 - Add libxenlight driver
2210 - qemu: support migration to fd
2211 - libvirt: add virDomain{Get,Set}BlkioParameters
2212 - setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
2213 - Expose event loop implementation as a public API
2214 - Dump the debug buffer to libvirtd.log on fatal signal
2216 - Various improvements and bug fixes
2218 * Thu Feb 17 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-1
2219 - expose new API for sysinfo extraction
2220 - cgroup blkio weight support
2221 - smartcard device support
2222 - qemu: Support per-device boot ordering
2223 - Various improvements and bug fixes
2225 * Tue Jan 4 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
2226 - Preliminary support for VirtualBox 4.0
2228 - Add VMware Workstation and Player driver driver
2229 - Add network disk support
2230 - Various improvements and bug fixes
2232 * Tue Nov 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.6-1
2233 - Add support for iSCSI target auto-discovery
2234 - QED: Basic support for QED images
2235 - remote console support
2236 - support for SPICE graphics
2237 - sysinfo and VMBIOS support
2238 - virsh qemu-monitor-command
2239 - various improvements and bug fixes
2241 * Fri Oct 29 2010 Daniel Veillard <veillard@redhat.com> - 0.8.5-1
2242 - Enable JSON and netdev features in QEMU >= 0.13
2243 - framework for auditing integration
2244 - framework DTrace/SystemTap integration
2245 - Setting the number of vcpu at boot
2246 - Enable support for nested SVM
2247 - Virtio plan9fs filesystem QEMU
2248 - Memory parameter controls
2249 - various improvements and bug fixes
2251 * Fri Sep 10 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
2252 - big improvements to UML driver
2253 - various improvements and bug fixes
2255 * Wed Aug 4 2010 Daniel Veillard <veillard@redhat.com> - 0.8.3-1
2256 - esx: Support vSphere 4.1
2257 - Qemu arbitrary monitor commands
2258 - Qemu Monitor API entry point
2259 - various improvements and bug fixes
2261 * Mon Jul 5 2010 Daniel Veillard <veillard@redhat.com> - 0.8.2-1
2262 - phyp: adding support for IVM
2263 - libvirt: introduce domainCreateWithFlags API
2264 - add 802.1Qbh and 802.1Qbg switches handling
2265 - Support for VirtualBox version 3.2
2266 - Init script for handling guests on shutdown/boot
2267 - qemu: live migration with non-shared storage for kvm
2269 * Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
2270 - Starts dnsmasq from libvirtd with --dhcp-hostsfile
2271 - Add virDomainGetBlockInfo API to query disk sizing
2272 - a lot of bug fixes and cleanups
2274 * Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
2275 - Snapshotting support (QEmu/VBox/ESX)
2276 - Network filtering API
2278 - new APIs for domain events
2279 - Libvirt managed save API
2280 - timer subselection for domain clock
2282 - API to update guest CPU to host CPU
2283 - virDomainUpdateDeviceFlags new API
2284 - migrate max downtime API
2286 - and many bug fixes
2288 * Fri Mar 5 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
2290 - async job handling
2292 - computing baseline CPU
2293 - virDomain{Attach,Detach}DeviceFlags
2294 - assorted bug fixes and lots of cleanups
2296 * Wed Feb 3 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1
2298 * Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
2299 - Add new API virDomainMemoryStats
2300 - Public API and domain extension for CPU flags
2301 - vbox: Add support for version 3.1
2302 - Support QEMU's virtual FAT block device driver
2305 * Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.3-1
2306 - udev node device backend
2307 - API to check object properties
2308 - better QEmu monitor processing
2309 - MAC address based port filtering for qemu
2310 - support IPv6 and multiple addresses per interfaces
2313 * Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
2314 - ESX, VBox driver updates
2316 - support for encrypted (qcow) volume
2317 - compressed save image format for Qemu/KVM
2318 - QEmu host PCI device hotplug support
2319 - configuration of huge pages in guests
2322 * Wed Aug 5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
2323 - ESX, VBox3, Power Hypervisor drivers
2324 - new net filesystem glusterfs
2325 - Storage cloning for LVM and Disk backends
2326 - interface implementation based on netcf
2327 - Support cgroups in QEMU driver
2328 - QEmu hotplug NIC support
2331 * Fri Jul 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.5-1
2334 * Fri May 29 2009 Daniel Veillard <veillard@redhat.com> - 0.6.4-1
2338 * Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1
2342 * Fri Apr 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
2345 * Fri Mar 4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
2348 * Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
2351 * Tue Nov 25 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1
2354 * Tue Sep 23 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-1
2357 * Mon Sep 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-1
2360 * Wed Jun 25 2008 Daniel Veillard <veillard@redhat.com> - 0.4.4-1
2362 - mostly a few bug fixes from 0.4.3
2364 * Thu Jun 12 2008 Daniel Veillard <veillard@redhat.com> - 0.4.3-1
2366 - lots of bug fixes and small improvements
2368 * Tue Apr 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.2-1
2370 - lots of bug fixes and small improvements
2372 * Mon Mar 3 2008 Daniel Veillard <veillard@redhat.com> - 0.4.1-1
2376 - lots of assorted improvements, bugfixes and cleanups
2377 - documentation and localization improvements
2379 * Tue Dec 18 2007 Daniel Veillard <veillard@redhat.com> - 0.4.0-1
2381 - SASL based authentication
2382 - PolicyKit authentication
2383 - improved NUMA and statistics support
2384 - lots of assorted improvements, bugfixes and cleanups
2385 - documentation and localization improvements
2387 * Sun Sep 30 2007 Daniel Veillard <veillard@redhat.com> - 0.3.3-1
2391 - lots of assorted improvements, bugfixes and cleanups
2392 - documentation and localization improvements
2394 * Tue Aug 21 2007 Daniel Veillard <veillard@redhat.com> - 0.3.2-1
2396 - API for domains migration
2397 - APIs for collecting statistics on disks and interfaces
2398 - lots of assorted bugfixes and cleanups
2399 - documentation and localization improvements
2401 * Tue Jul 24 2007 Daniel Veillard <veillard@redhat.com> - 0.3.1-1
2403 - localtime clock support
2404 - PS/2 and USB input devices
2405 - lots of assorted bugfixes and cleanups
2406 - documentation and localization improvements
2408 * Mon Jul 9 2007 Daniel Veillard <veillard@redhat.com> - 0.3.0-1
2410 - Secure remote access support
2411 - unification of daemons
2412 - lots of assorted bugfixes and cleanups
2413 - documentation and localization improvements
2415 * Fri Jun 8 2007 Daniel Veillard <veillard@redhat.com> - 0.2.3-1
2417 - lot of assorted bugfixes and cleanups
2418 - support for Xen-3.1
2421 * Tue Apr 17 2007 Daniel Veillard <veillard@redhat.com> - 0.2.2-1
2423 - lot of assorted bugfixes and cleanups
2424 - preparing for Xen-3.0.5
2426 * Thu Mar 22 2007 Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
2427 - don't require xen; we don't need the daemon and can control non-xen now
2428 - fix scriptlet error (need to own more directories)
2429 - update description text
2431 * Fri Mar 16 2007 Daniel Veillard <veillard@redhat.com> - 0.2.1-1
2433 - lot of bug and portability fixes
2434 - Add support for network autostart and init scripts
2435 - New API to detect the virtualization capabilities of a host
2436 - Documentation updates
2438 * Fri Feb 23 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-4.fc7
2439 - Fix loading of guest & network configs
2441 * Fri Feb 16 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
2442 - Disable kqemu support since its not in Fedora qemu binary
2443 - Fix for -vnc arg syntax change in 0.9.0 QEMU
2445 * Thu Feb 15 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
2446 - Fixed path to qemu daemon for autostart
2447 - Fixed generation of <features> block in XML
2448 - Pre-create config directory at startup
2450 * Wed Feb 14 2007 Daniel Veillard <veillard@redhat.com> 0.2.0-1.fc7
2451 - support for KVM and QEmu
2452 - support for network configuration
2455 * Mon Jan 22 2007 Daniel Veillard <veillard@redhat.com> 0.1.11-1.fc7
2456 - finish inactive Xen domains support
2458 - RelaxNG schemas for XML configs
2460 * Wed Dec 20 2006 Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
2461 - support for inactive Xen domains
2462 - improved support for Xen display and vnc
2464 - localization updates
2466 * Thu Dec 7 2006 Jeremy Katz <katzj@redhat.com> - 0.1.9-2
2467 - rebuild against python 2.5
2469 * Wed Nov 29 2006 Daniel Veillard <veillard@redhat.com> 0.1.9-1
2470 - better error reporting
2471 - python bindings fixes and extensions
2472 - add support for shareable drives
2473 - add support for non-bridge style networking
2474 - hot plug device support
2475 - added support for inactive domains
2476 - API to dump core of domains
2477 - various bug fixes, cleanups and improvements
2478 - updated the localization
2480 * Tue Nov 7 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-3
2481 - it's pkgconfig not pgkconfig !
2483 * Mon Nov 6 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-2
2484 - fixing spec file, added %dist, -devel requires pkgconfig and xen-devel
2485 - Resolves: rhbz#202320
2487 * Mon Oct 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-1
2488 - fix missing page size detection code for ia64
2489 - fix mlock size when getting domain info list from hypervisor
2490 - vcpu number initialization
2491 - don't label crashed domains as shut off
2492 - fix virsh man page
2493 - blktapdd support for alternate drivers like blktap
2494 - memory leak fixes (xend interface and XML parsing)
2496 - mlock/munlock size fixes
2498 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.7-1
2499 - Fix bug when running against xen-3.0.3 hypercalls
2500 - Fix memory bug when getting vcpus info from xend
2502 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.6-1
2503 - Support for localization
2504 - Support for new Xen-3.0.3 cdrom and disk configuration
2505 - Support for setting VNC port
2506 - Fix bug when running against xen-3.0.2 hypercalls
2507 - Fix reconnection problem when talking directly to http xend
2509 * Tue Sep 5 2006 Jeremy Katz <katzj@redhat.com> - 0.1.5-3
2510 - patch from danpb to support new-format cd devices for HVM guests
2512 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-2
2513 - reactivating ia64 support
2515 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-1
2518 - support for new hypervisor calls
2519 - early code for config files and defined domains
2521 * Mon Sep 4 2006 Daniel Berrange <berrange@redhat.com> - 0.1.4-5
2522 - add patch to address dom0_ops API breakage in Xen 3.0.3 tree
2524 * Mon Aug 28 2006 Jeremy Katz <katzj@redhat.com> - 0.1.4-4
2525 - add patch to support paravirt framebuffer in Xen
2527 * Mon Aug 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-3
2528 - another patch to fix network handling in non-HVM guests
2530 * Thu Aug 17 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-2
2531 - patch to fix virParseUUID()
2533 * Wed Aug 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-1
2534 - vCPUs and affinity support
2535 - more complete XML, console and boot options
2536 - specific features support
2537 - enforced read-only connections
2538 - various improvements, bug fixes
2540 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-6
2541 - add patch from pvetere to allow getting uuid from libvirt
2543 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-5
2546 * Thu Jul 27 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-4
2547 - don't BR xen, we just need xen-devel
2549 * Thu Jul 27 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-3
2550 - need rebuild since libxenstore is now versionned
2552 * Mon Jul 24 2006 Mark McLoughlin <markmc@redhat.com> - 0.1.3-2
2553 - Add BuildRequires: xen-devel
2555 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.1.3-1.1
2558 * Tue Jul 11 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-1
2559 - support for HVM Xen guests
2562 * Mon Jul 3 2006 Daniel Veillard <veillard@redhat.com> 0.1.2-1
2563 - added a proxy mechanism for read only access using httpu
2564 - fixed header includes paths
2566 * Wed Jun 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.1-1
2567 - extend and cleanup the driver infrastructure and code
2569 - extend uuid support
2570 - bug fixes, buffer handling cleanups
2571 - support for new Xen hypervisor API
2572 - test driver for unit testing
2573 - virsh --conect argument
2575 * Mon Apr 10 2006 Daniel Veillard <veillard@redhat.com> 0.1.0-1
2577 - new APIs: for Node information and Reboot
2578 - virsh improvements and extensions
2579 - documentation updates and man page
2580 - enhancement and fixes of the XML description format
2582 * Tue Feb 28 2006 Daniel Veillard <veillard@redhat.com> 0.0.6-1
2583 - added error handling APIs
2585 - improve python bindings
2586 - augment documentation and regression tests
2588 * Thu Feb 23 2006 Daniel Veillard <veillard@redhat.com> 0.0.5-1
2589 - new domain creation API
2590 - new UUID based APIs
2591 - more tests, documentation, devhelp
2594 * Fri Feb 10 2006 Daniel Veillard <veillard@redhat.com> 0.0.4-1
2595 - fixes some problems in 0.0.3 due to the change of names
2597 * Wed Feb 8 2006 Daniel Veillard <veillard@redhat.com> 0.0.3-1
2598 - changed library name to libvirt from libvir, complete and test the python
2601 * Sun Jan 29 2006 Daniel Veillard <veillard@redhat.com> 0.0.2-1
2602 - upstream release of 0.0.2, use xend, save and restore added, python bindings
2605 * Wed Nov 2 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1