# -*- rpm-spec -*-
-%define mainstream_version 1.0.4
+%define mainstream_version 1.2.3
%define module_version_varname mainstream_version
-%define taglevel 0
+%define taglevel 1
+%define packager PlanetLab/OneLab
#libvirt-RPMFLAGS := --without storage-disk --without storage-iscsi --without storage-scsi \
-# --without storage-fs --without storage-lvm \
-# --without polkit --without sasl --without audit --with capng --with udev \
-# --without netcf --without avahi --without sanlock \
-# --without xen --without qemu --without hyperv --without phyp --without esx \
-# --without libxl \
-%define _without_storage_disk true
-%define _without_storage_iscsi true
-%define _without_storage_fs true
-%define _without_storage_lvm true
-%define _without_polkit true
-%define _without_sasl true
-%define _without_audit true
-#interface requires netcf
-#%define _without_netcf true
-%define _without_avahi true
-%define _without_sanlock true
-%define _without_xen true
-%define _without_qemu true
-%define _without_hyperv true
-%define _without_phyp true
-%define _without_esx true
-%define _without_libxl true
-
-# turn this off even on f18 as an attempt to get back /proc/meminfo
-%define _without_fuse true
-
-%define enable_autotools 1
-
+## --without storage-fs --without storage-lvm \
+## --without polkit --without sasl --without audit --with capng --with udev \
+## --without netcf --without avahi --without sanlock \
+## --without xen --without qemu --without hyperv --without phyp --without esx \
+## --without libxl --without vbox \
+%define _without_storage_disk true
+%define _without_storage_iscsi true
+%define _without_storage_fs true
+%define _without_storage_lvm true
+%define _without_polkit true
+%define _without_sasl true
+%define _without_audit true
+%define _without_avahi true
+%define _without_sanlock true
+%define _without_xen true
+%define _without_qemu true
+%define _without_hyperv true
+%define _without_phyp true
+%define _without_esx true
+%define _without_libxl true
+%define _without_vbox true
+%define _without_uml true
+
+#turn this off even on f18 as an attempt to get back /proc/meminfo
+%define _without_fuse true
+
+%define enable_autotools 1
+
# If neither fedora nor rhel was defined, try to guess them from %{dist}
%if !0%{?rhel} && !0%{?fedora}
%{expand:%(echo "%{?dist}" | \
# A client only build will create a libvirt.so only containing
# the generic RPC driver, and test driver and no libvirtd
-# Default to a full server + client build
-%define client_only 0
+# Default to a full server + client build, but with the possibility
+# of a command-line or ~/.rpmmacros override for client-only.
+%{!?client_only:%define client_only 0}
# Now turn off server build in certain cases
%define with_lxc 0%{!?_without_lxc:%{server_drivers}}
%define with_uml 0%{!?_without_uml:%{server_drivers}}
%define with_libxl 0%{!?_without_libxl:%{server_drivers}}
+%define with_vbox 0%{!?_without_vbox:%{server_drivers}}
%define with_qemu_tcg %{with_qemu}
# Change if we ever provide qemu-kvm binaries on non-x86 hosts
%if 0%{?fedora} >= 18
- %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
+ %if 0%{?fedora} >= 20
+ %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x %{arm}
+ %else
+ %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
+ %endif
%else
%define qemu_kvm_arches %{ix86} x86_64
%endif
# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
%define with_openvz 0%{!?_without_openvz:1}
-%define with_vbox 0%{!?_without_vbox:1}
%define with_vmware 0%{!?_without_vmware:1}
%define with_phyp 0%{!?_without_phyp:1}
%define with_esx 0%{!?_without_esx:1}
%else
%define with_storage_sheepdog 0
%endif
+%if 0%{?fedora} >= 19
+ %define with_storage_gluster 0%{!?_without_storage_gluster:%{server_drivers}}
+%else
+ %define with_storage_gluster 0
+%endif
%define with_numactl 0%{!?_without_numactl:%{server_drivers}}
%define with_selinux 0%{!?_without_selinux:%{server_drivers}}
+# Just hardcode to off, since few people ever have apparmor RPMs installed
+%define with_apparmor 0%{!?_without_apparmor:0}
+
# A few optional bits off by default, we enable later
%define with_polkit 0%{!?_without_polkit:0}
%define with_capng 0%{!?_without_capng:0}
%define with_libssh2 0%{!?_without_libssh2:0}
# Non-server/HV driver defaults which are always enabled
-%define with_python 0%{!?_without_python:1}
%define with_sasl 0%{!?_without_sasl:1}
%define with_libxl 0
%endif
+# vbox is available only on i386 x86_64
+%ifnarch %{ix86} x86_64
+ %define with_vbox 0
+%endif
+
# Numactl is not available on s390[x] and ARM
%ifarch s390 s390x %{arm}
%define with_numactl 0
%define with_hal 0%{!?_without_hal:%{server_drivers}}
%endif
-# interface requires netcf
-%if ! 0%{?with_netcf}
- %define with_interface 0
-%endif
-
# Enable yajl library for JSON mode with QEMU
%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
%define with_yajl 0%{!?_without_yajl:%{server_drivers}}
%if 0%{?fedora} >= 16
%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
%endif
-%if 0%{?rhel} >= 6
+%if 0%{?rhel} == 6
%ifarch %{ix86} x86_64
%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
%endif
%endif
+%if 0%{?rhel} >= 7
+ %ifarch x86_64
+ %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
+ %endif
+%endif
# Enable libssh2 transport for new enough distros
-%if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
+%if 0%{?fedora} >= 17
%define with_libssh2 0%{!?_without_libssh2:1}
%endif
%define with_storage_mpath 0
%define with_storage_rbd 0
%define with_storage_sheepdog 0
+ %define with_storage_gluster 0
%define with_storage_disk 0
%endif
%endif
+# RHEL releases provide stable tool chains and so it is safe to turn
+# compiler warning into errors without being worried about frequent
+# changes in reported warnings
+%if 0%{?rhel}
+ %define enable_werror --enable-werror
+%endif
+
+
Summary: Library providing a simple virtualization API
Name: libvirt
Version: %{mainstream_version}
%define mainturl stable_updates/
%endif
Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
+Patch1: libvirt-1.2.3-bypass-netns-check.patch
%if %{with_libvirtd}
Requires: libvirt-daemon = %{version}-%{release}
%if %{with_xen}
Requires: libvirt-daemon-driver-xen = %{version}-%{release}
%endif
+ %if %{with_vbox}
+Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
+ %endif
+ %if %{with_nwfilter}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+ %endif
%if %{with_interface}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
-Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
%endif
%endif
Requires: libvirt-client = %{version}-%{release}
BuildRequires: automake
BuildRequires: gettext-devel
BuildRequires: libtool
+BuildRequires: /usr/bin/pod2man
%endif
-BuildRequires: python-devel
+BuildRequires: python
%if %{with_systemd}
BuildRequires: systemd-units
%endif
-%if %{with_xen}
+%if %{with_xen} || %{with_libxl}
BuildRequires: xen-devel
%endif
BuildRequires: libxml2-devel
BuildRequires: ncurses-devel
BuildRequires: gettext
BuildRequires: libtasn1-devel
+%if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 19)
+BuildRequires: libgcrypt-devel
+%endif
BuildRequires: gnutls-devel
BuildRequires: libattr-devel
+%if %{with_libvirtd}
+# For pool-build probing for existing pools
+BuildRequires: libblkid-devel >= 2.17
+%endif
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# for augparse, optionally used in testing
BuildRequires: augeas
%if %{with_selinux}
BuildRequires: libselinux-devel
%endif
+%if %{with_apparmor}
+BuildRequires: libapparmor-devel
+%endif
%if %{with_network}
BuildRequires: dnsmasq >= 2.41
BuildRequires: iptables
%endif
%if %{with_polkit}
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
-# Only need the binary, not -devel
-BuildRequires: polkit >= 0.93
+BuildRequires: polkit-devel >= 0.93
%else
BuildRequires: PolicyKit-devel >= 0.6
%endif
BuildRequires: ceph-devel
%endif
%endif
+%if %{with_storage_gluster}
+BuildRequires: glusterfs-api-devel >= 3.4.1
+BuildRequires: glusterfs-devel >= 3.4.1
+%endif
%if %{with_numactl}
# For QEMU/LXC numa info
BuildRequires: numactl-devel
%endif
%if %{with_fuse}
BuildRequires: fuse-devel >= 2.8.6
-Requires: fuse
%endif
%if %{with_phyp} || %{with_libssh2}
BuildRequires: libssh2-devel >= 1.3.0
Requires: avahi-libs
%endif
%endif
- %if %{with_network}
-Requires: dnsmasq >= 2.41
-Requires: radvd
- %endif
- %if %{with_network} || %{with_nwfilter}
-Requires: iptables
-Requires: iptables-ipv6
- %endif
- %if %{with_nwfilter}
-Requires: ebtables
- %endif
- %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)
-Requires: netcf-libs >= 0.2.2
- %endif
-# needed for device enumeration
- %if %{with_hal}
-Requires: hal
- %endif
- %if %{with_udev}
- %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
-Requires: systemd >= 185
- %else
-Requires: udev >= 145
- %endif
- %endif
%if %{with_polkit}
%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
Requires: polkit >= 0.93
Requires: PolicyKit >= 0.6
%endif
%endif
- %if %{with_storage_fs}
-Requires: nfs-utils
-# For mkfs
-Requires: util-linux
-# For pool-build probing for existing pools
-BuildRequires: libblkid-devel >= 2.17
-# For glusterfs
- %if 0%{?fedora} >= 11
-Requires: glusterfs-client >= 2.0.1
- %endif
- %endif
- %if %{with_qemu}
-# From QEMU RPMs
-Requires: /usr/bin/qemu-img
-# For image compression
-Requires: gzip
-Requires: bzip2
-Requires: lzop
-Requires: xz
- %else
- %if %{with_xen}
-# From Xen RPMs
-Requires: /usr/sbin/qcow-create
- %endif
- %endif
- %if %{with_storage_lvm}
-# For LVM drivers
-Requires: lvm2
- %endif
- %if %{with_storage_iscsi}
-# For ISCSI driver
-Requires: iscsi-initiator-utils
- %endif
- %if %{with_storage_disk}
-# For disk driver
-Requires: parted
-Requires: device-mapper
- %endif
- %if %{with_storage_mpath}
-# For multipath support
-Requires: device-mapper
- %endif
- %if %{with_storage_sheepdog}
-# For Sheepdog support
-Requires: sheepdog
- %endif
%if %{with_cgconfig}
Requires: libcgroup
%endif
%endif
# libvirtd depends on 'messagebus' service
Requires: dbus
+# For uid creation during pre
+Requires(pre): shadow-utils
%description daemon
Server side daemon required to manage the virtualization capabilities
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
%description daemon-config-network
Default configuration files for setting up NAT based networking
Summary: Network driver plugin for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
+Requires: dnsmasq >= 2.41
+Requires: radvd
+Requires: iptables
+Requires: iptables-ipv6
%description daemon-driver-network
The network driver plugin for the libvirtd daemon, providing
Summary: Nwfilter driver plugin for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
+Requires: iptables
+Requires: iptables-ipv6
+Requires: ebtables
%description daemon-driver-nwfilter
The nwfilter driver plugin for the libvirtd daemon, providing
Summary: Nodedev driver plugin for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
+# needed for device enumeration
+ %if %{with_hal}
+Requires: hal
+ %endif
+ %if %{with_udev}
+ %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
+Requires: systemd >= 185
+ %else
+Requires: udev >= 145
+ %endif
+ %endif
%description daemon-driver-nodedev
The nodedev driver plugin for the libvirtd daemon, providing
Summary: Interface driver plugin for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
+ %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)
+Requires: netcf-libs >= 0.2.2
+ %endif
%description daemon-driver-interface
The interface driver plugin for the libvirtd daemon, providing
Summary: Storage driver plugin for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
+ %if %{with_storage_fs}
+Requires: nfs-utils
+# For mkfs
+Requires: util-linux
+# For glusterfs
+ %if 0%{?fedora} >= 11
+Requires: glusterfs-client >= 2.0.1
+ %endif
+ %endif
+ %if %{with_storage_lvm}
+# For LVM drivers
+Requires: lvm2
+ %endif
+ %if %{with_storage_iscsi}
+# For ISCSI driver
+Requires: iscsi-initiator-utils
+ %endif
+ %if %{with_storage_disk}
+# For disk driver
+Requires: parted
+Requires: device-mapper
+ %endif
+ %if %{with_storage_mpath}
+# For multipath support
+Requires: device-mapper
+ %endif
+ %if %{with_storage_sheepdog}
+# For Sheepdog support
+Requires: sheepdog
+ %endif
+ %if %{with_qemu}
+# From QEMU RPMs
+Requires: /usr/bin/qemu-img
+ %else
+ %if %{with_xen}
+# From Xen RPMs
+Requires: /usr/sbin/qcow-create
+ %endif
+ %endif
%description daemon-driver-storage
The storage driver plugin for the libvirtd daemon, providing
Requires: libvirt-daemon = %{version}-%{release}
# There really is a hard cross-driver dependency here
Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: /usr/bin/qemu-img
+# For image compression
+Requires: gzip
+Requires: bzip2
+Requires: lzop
+Requires: xz
%description daemon-driver-qemu
The qemu driver plugin for the libvirtd daemon, providing
%endif
+ %if %{with_vbox}
+%package daemon-driver-vbox
+Summary: VirtualBox driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-vbox
+The vbox driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+VirtualBox
+ %endif
+
+
%if %{with_libxl}
%package daemon-driver-libxl
Summary: Libxl driver plugin for the libvirtd daemon
Server side daemon and driver required to manage the virtualization
capabilities of XEN
%endif
+
+ %if %{with_vbox}
+%package daemon-vbox
+Summary: Server side daemon & driver required to run VirtualBox guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+ %if %{with_driver_modules}
+Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+ %endif
+
+%description daemon-vbox
+Server side daemon and driver required to manage the virtualization
+capabilities of VirtualBox
+ %endif
%endif # %{with_libvirtd}
%package client
# So remote clients can access libvirt over SSH tunnel
# (client invokes 'nc' against the UNIX socket on the server)
Requires: nc
-# Needed by libvirt-guests init script.
+# Needed by /usr/libexec/libvirt-guests.sh script.
Requires: gettext
# Needed by virt-pki-validate script.
Requires: gnutls-utils
Shared libraries and client binaries needed to access to the
virtualization capabilities of recent versions of Linux (and other OSes).
+%if %{with_lxc}
+%package login-shell
+Summary: Login shell for connecting users to an LXC container
+Group: Development/Libraries
+Requires: %{name}-client = %{version}-%{release}
+
+%description login-shell
+Provides the set-uid virt-login-shell binary that is used to
+connect a user to an LXC container when they login, by switching
+namespaces.
+%endif
+
%package devel
Summary: Libraries, includes, etc. to compile with the libvirt library
Group: Development/Libraries
driver
%endif
-%if %{with_python}
-%package python
-Summary: Python bindings for the libvirt library
-Group: Development/Libraries
-Requires: %{name}-client = %{version}-%{release}
-
-%description python
-The libvirt-python package contains a module that permits applications
-written in the Python programming language to use the interface
-supplied by the libvirt library to use the virtualization capabilities
-of recent versions of Linux (and other OSes).
-%endif
-
%prep
%setup -q
+%patch1 -p0 -b .bypass-netns-check
%build
%if ! %{with_xen}
%define _without_polkit --without-polkit
%endif
-%if ! %{with_python}
- %define _without_python --without-python
-%endif
-
%if ! %{with_libvirtd}
%define _without_libvirtd --without-libvirtd
%endif
%define _without_storage_sheepdog --without-storage-sheepdog
%endif
+%if ! %{with_storage_gluster}
+ %define _without_storage_gluster --without-storage-gluster
+%endif
+
%if ! %{with_numactl}
%define _without_numactl --without-numactl
%endif
%define _without_selinux --without-selinux
%endif
+%if ! %{with_apparmor}
+ %define _without_apparmor --without-apparmor
+%endif
+
%if ! %{with_hal}
%define _without_hal --without-hal
%endif
%define init_scripts --with-init_script=redhat
%endif
-%if 0%{?enable_autotools}
- autoreconf -if
-%endif
-
%if %{with_selinux}
%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
%define with_selinux_mount --with-selinux-mount="/sys/fs/selinux"
%endif
%endif
+# place macros above and build commands below this comment
+
+%if 0%{?enable_autotools}
+ autoreconf -if
+%endif
+
%configure %{?_without_xen} \
%{?_without_qemu} \
%{?_without_openvz} \
%{?_without_sasl} \
%{?_without_avahi} \
%{?_without_polkit} \
- %{?_without_python} \
%{?_without_libvirtd} \
%{?_without_uml} \
%{?_without_phyp} \
%{?_without_storage_mpath} \
%{?_without_storage_rbd} \
%{?_without_storage_sheepdog} \
+ %{?_without_storage_gluster} \
%{?_without_numactl} \
%{?_without_numad} \
%{?_without_capng} \
%{?_without_netcf} \
%{?_without_selinux} \
%{?_with_selinux_mount} \
+ %{?_without_apparmor} \
%{?_without_hal} \
%{?_without_udev} \
%{?_without_yajl} \
%{with_packager_version} \
--with-qemu-user=%{qemu_user} \
--with-qemu-group=%{qemu_group} \
+ %{?enable_werror} \
+ --enable-expensive-tests \
%{init_scripts}
make %{?_smp_mflags}
gzip -9 ChangeLog
%install
rm -fr %{buildroot}
-%makeinstall SYSTEMD_UNIT_DIR=%{buildroot}%{_unitdir}
-for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap
+# Avoid using makeinstall macro as it changes prefixes rather than setting
+# DESTDIR. Newer make_install macro would be better but it's not available
+# on RHEL 5, thus we need to expand it here.
+make install DESTDIR=%{?buildroot} SYSTEMD_UNIT_DIR=%{_unitdir}
+
+for i in object-events dominfo domsuspend hellolibvirt openauth xml/nwfilter systemtap
do
(cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
done
rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
-rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
-rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
%if %{with_driver_modules}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%endif
-%if ! %{with_python}
-rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
-%else
-rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}/examples
-%endif
-
%if ! %{with_qemu}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
%endif
-mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} \
- $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
+# Copied into libvirt-docs subpackage eventually
+mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} libvirt-docs
%if %{with_dtrace}
%ifarch %{power64} s390x x86_64 ia64 alpha sparc64
rm -fr %{buildroot}
%check
+# PlanetLab build
+# do not run tests, this is mainstream business, and more importantly
+# our own setup is ti build inside a container already and we've seen
+# occasional red herrings because of that
+exit
+#
cd tests
make
# These tests don't current work in a mock build root
printf '#!/bin/sh\nexit 0\n' > $i
chmod +x $i
done
-make check
+if ! make check VIR_TEST_DEBUG=1
+then
+ cat test-suite.log || true
+ exit 1
+fi
%if %{with_libvirtd}
+ %if ! %{with_driver_modules}
+ %if %{with_qemu}
%pre daemon
- %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
-# Normally 'setup' adds this in /etc/passwd, but this is
-# here for case of upgrades from earlier Fedora/RHEL. This
-# UID/GID pair is reserved for qemu:qemu
-getent group kvm >/dev/null || groupadd -g 36 -r kvm
-getent group qemu >/dev/null || groupadd -g 107 -r qemu
-getent passwd qemu >/dev/null || \
- useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
- -c "qemu user" qemu
+ %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+# We want soft static allocation of well-known ids, as disk images
+# are commonly shared across NFS mounts by id rather than name; see
+# https://fedoraproject.org/wiki/Packaging:UsersAndGroups
+getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
+getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
+if ! getent passwd qemu >/dev/null; then
+ if ! getent passwd 107 >/dev/null; then
+ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
+ else
+ useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
+ fi
+fi
+exit 0
+ %endif
+ %endif
%endif
%post daemon
%if %{with_systemd}
%if %{with_systemd_macros}
- %systemd_post libvirtd.service
+ %systemd_post virtlockd.socket libvirtd.service
%else
if [ $1 -eq 1 ] ; then
# Initial installation
- /bin/systemctl enable virtlockd.socket >/dev/null 2>&1 || :
- /bin/systemctl enable libvirtd.service >/dev/null 2>&1 || :
+ /bin/systemctl enable virtlockd.socket libvirtd.service >/dev/null 2>&1 || :
fi
%endif
%else
%endif
/sbin/chkconfig --add libvirtd
-if [ "$1" -ge "1" ]; then
- /sbin/service libvirtd condrestart > /dev/null 2>&1
-fi
+/sbin/chkconfig --add virtlockd
%endif
%preun daemon
%if %{with_systemd}
%if %{with_systemd_macros}
- %systemd_preun libvirtd.service
+ %systemd_preun libvirtd.service virtlockd.socket virtlockd.service
%else
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
- /bin/systemctl --no-reload disable virtlockd.socket > /dev/null 2>&1 || :
- /bin/systemctl --no-reload disable libvirtd.service > /dev/null 2>&1 || :
- /bin/systemctl stop libvirtd.service > /dev/null 2>&1 || :
- /bin/systemctl stop virtlockd.service > /dev/null 2>&1 || :
+ /bin/systemctl --no-reload disable libvirtd.service virtlockd.socket virtlockd.service > /dev/null 2>&1 || :
+ /bin/systemctl stop libvirtd.service virtlockd.socket virtlockd.service > /dev/null 2>&1 || :
fi
%endif
%else
if [ $1 = 0 ]; then
/sbin/service libvirtd stop 1>/dev/null 2>&1
/sbin/chkconfig --del libvirtd
+ /sbin/service virtlockd stop 1>/dev/null 2>&1
+ /sbin/chkconfig --del virtlockd
fi
%endif
%postun daemon
%if %{with_systemd}
- %if %{with_systemd_macros}
- %systemd_postun_with_restart libvirtd.service
- %else
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -ge 1 ] ; then
- # Package upgrade, not uninstall
- /bin/systemctl status virtlockd.service >/dev/null 2>&1
- if [ $? = 1 ] ; then
- /bin/systemctl kill --signal=USR1 virtlockd.service >/dev/null 2>&1 || :
- fi
+ /bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || :
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
fi
- %endif
+ %else
+if [ $1 -ge 1 ]; then
+ /sbin/service virtlockd reload > /dev/null 2>&1 || :
+ /sbin/service libvirtd condrestart > /dev/null 2>&1
+fi
+ %endif
+
+ %if %{with_systemd}
+ %else
+%triggerpostun daemon -- libvirt-daemon < 1.2.1
+if [ "$1" -ge "1" ]; then
+ /sbin/service virtlockd reload > /dev/null 2>&1 || :
+ /sbin/service libvirtd condrestart > /dev/null 2>&1
+fi
%endif
%if %{with_network}
/sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
%endif
+
+ %if %{with_driver_modules}
+ %if %{with_qemu}
+%pre daemon-driver-qemu
+ %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+# We want soft static allocation of well-known ids, as disk images
+# are commonly shared across NFS mounts by id rather than name; see
+# https://fedoraproject.org/wiki/Packaging:UsersAndGroups
+getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
+getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
+if ! getent passwd qemu >/dev/null; then
+ if ! getent passwd 107 >/dev/null; then
+ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
+ else
+ useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
+ fi
+fi
+exit 0
+ %endif
+ %endif
+ %endif
%endif # %{with_libvirtd}
%preun client
/sbin/ldconfig
%if %{with_systemd}
%if %{with_systemd_macros}
- %systemd_postun_with_restart libvirt-guests.service
+ %systemd_postun libvirt-guests.service
%endif
%triggerun client -- libvirt < 0.9.4
%{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
# If the package is allowed to autostart:
/bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||:
-# Run these because the SysV package being removed won't do them
+# Run this because the SysV package being removed won't do them
/sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || :
-/bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
%endif
%if %{with_sanlock}
fi
%endif
+%if %{with_lxc}
+%pre login-shell
+getent group virtlogin >/dev/null || groupadd -r virtlogin
+exit 0
+%endif
+
%files
%defattr(-, root, root)
%files docs
%defattr(-, root, root)
-# Website
-%dir %{_datadir}/doc/libvirt-docs-%{version}
-%dir %{_datadir}/doc/libvirt-docs-%{version}/html
-%{_datadir}/doc/libvirt-docs-%{version}/html/*
+%doc AUTHORS ChangeLog.gz NEWS README TODO libvirt-docs/*
# API docs
%dir %{_datadir}/gtk-doc/html/libvirt/
%files daemon
%defattr(-, root, root)
-%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
- %if %{with_network}
-%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
-%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
-%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
- %endif
-
+ %if %{with_nwfilter}
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
+ %endif
%if %{with_systemd}
%{_unitdir}/libvirtd.service
%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
%config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
+%config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
%if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
%config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
%endif
-%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
-%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
-%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
- %if %{with_libxl}
-%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
- %endif
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
- %if %{with_qemu}
-%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
-%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
-%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
- %endif
- %if %{with_lxc}
-%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
-%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
- %endif
- %if %{with_uml}
-%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
- %endif
-
%dir %{_datadir}/libvirt/
- %if %{with_network}
-%dir %{_datadir}/libvirt/networks/
-%{_datadir}/libvirt/networks/default.xml
- %endif
-
%ghost %dir %{_localstatedir}/run/libvirt/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
- %if %{with_qemu}
-%ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
-%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
-%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
- %endif
- %if %{with_lxc}
-%ghost %dir %{_localstatedir}/run/libvirt/lxc/
-%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
- %endif
- %if %{with_uml}
-%ghost %dir %{_localstatedir}/run/libvirt/uml/
-%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
- %endif
- %if %{with_libxl}
-%ghost %dir %{_localstatedir}/run/libvirt/libxl/
-%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
- %endif
- %if %{with_xen}
-%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
- %endif
- %if %{with_network}
-%ghost %dir %{_localstatedir}/run/libvirt/network/
-%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
-%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
- %endif
%dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
- %if %{with_qemu}
-%{_datadir}/augeas/lenses/libvirtd_qemu.aug
-%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
- %endif
-
- %if %{with_lxc}
-%{_datadir}/augeas/lenses/libvirtd_lxc.aug
-%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
- %endif
-
%{_datadir}/augeas/lenses/libvirtd.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
+%{_datadir}/augeas/lenses/virtlockd.aug
+%{_datadir}/augeas/lenses/tests/test_virtlockd.aug
%{_datadir}/augeas/lenses/libvirt_lockd.aug
-%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
+### planetlab: we do not run tests
+# %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
%if %{with_polkit}
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
+%{_datadir}/polkit-1/actions/org.libvirt.api.policy
%else
%{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
%endif
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
- %if %{with_lxc}
-%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
- %endif
+%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
- %if %{with_storage_disk}
-%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
+ %if %{with_apparmor}
+%attr(0755, root, root) %{_libexecdir}/virt-aa-helper
%endif
-%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
%attr(0755, root, root) %{_sbindir}/libvirtd
%attr(0755, root, root) %{_sbindir}/virtlockd
%{_mandir}/man8/libvirtd.8*
+%{_mandir}/man8/virtlockd.8*
- %if %{with_driver_modules}
+ %if ! %{with_driver_modules}
%if %{with_network}
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
+%dir %{_datadir}/libvirt/networks/
+%{_datadir}/libvirt/networks/default.xml
+%ghost %dir %{_localstatedir}/run/libvirt/network/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
+%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
+ %endif
+ %if %{with_storage_disk}
+%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
+ %endif
+ %if %{with_qemu}
+%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
+%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
+%ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
+%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
+%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/
+%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/
+%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
+%{_datadir}/augeas/lenses/libvirtd_qemu.aug
+%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
+ %endif
+ %if %{with_lxc}
+%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
+%ghost %dir %{_localstatedir}/run/libvirt/lxc/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
+%{_datadir}/augeas/lenses/libvirtd_lxc.aug
+%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
+%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
+ %endif
+ %if %{with_uml}
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
+%ghost %dir %{_localstatedir}/run/libvirt/uml/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
+ %endif
+ %if %{with_libxl}
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
+%ghost %dir %{_localstatedir}/run/libvirt/libxl/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
+ %endif
+ %if %{with_xen}
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
+ %endif
+ %endif # ! %{with_driver_modules}
+
+ %if %{with_network}
%files daemon-config-network
%defattr(-, root, root)
- %endif
+ %endif
- %if %{with_nwfilter}
+ %if %{with_nwfilter}
%files daemon-config-nwfilter
%defattr(-, root, root)
%{_sysconfdir}/libvirt/nwfilter/*.xml
- %endif
+ %endif
+ %if %{with_driver_modules}
%if %{with_interface}
%files daemon-driver-interface
%defattr(-, root, root)
%if %{with_network}
%files daemon-driver-network
%defattr(-, root, root)
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
+%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
+%dir %{_datadir}/libvirt/networks/
+%{_datadir}/libvirt/networks/default.xml
+%ghost %dir %{_localstatedir}/run/libvirt/network/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
+%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
%{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
%endif
%if %{with_storage}
%files daemon-driver-storage
%defattr(-, root, root)
+ %if %{with_storage_disk}
+%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
+ %endif
%{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
%endif
%if %{with_qemu}
%files daemon-driver-qemu
%defattr(-, root, root)
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
+%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
+%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
+%ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
+%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
+%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/
+%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/
+%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
+%{_datadir}/augeas/lenses/libvirtd_qemu.aug
+%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
%endif
%if %{with_lxc}
%files daemon-driver-lxc
%defattr(-, root, root)
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
+%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
+%ghost %dir %{_localstatedir}/run/libvirt/lxc/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
+%{_datadir}/augeas/lenses/libvirtd_lxc.aug
+%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
+%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
%{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
%endif
%if %{with_uml}
%files daemon-driver-uml
%defattr(-, root, root)
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
+%ghost %dir %{_localstatedir}/run/libvirt/uml/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
%{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so
%endif
%if %{with_xen}
%files daemon-driver-xen
%defattr(-, root, root)
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
%{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so
%endif
%if %{with_libxl}
%files daemon-driver-libxl
%defattr(-, root, root)
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
+%ghost %dir %{_localstatedir}/run/libvirt/libxl/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
%{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
%endif
+
+ %if %{with_vbox}
+%files daemon-driver-vbox
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so
+ %endif
%endif # %{with_driver_modules}
%if %{with_qemu_tcg}
%if %{with_xen} || %{with_libxl}
%files daemon-xen
+%defattr(-, root, root)
+ %endif
+
+ %if %{with_vbox}
+%files daemon-vbox
%defattr(-, root, root)
%endif
%endif # %{with_libvirtd}
%files client -f %{name}.lang
%defattr(-, root, root)
-%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
+%doc COPYING COPYING.LESSER
%config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
%{_mandir}/man1/virsh.1*
%{_datadir}/libvirt/schemas/nwfilter.rng
%{_datadir}/libvirt/schemas/secret.rng
%{_datadir}/libvirt/schemas/storageencryption.rng
+%{_datadir}/libvirt/schemas/storagefilefeatures.rng
%{_datadir}/libvirt/schemas/storagepool.rng
%{_datadir}/libvirt/schemas/storagevol.rng
%{_datadir}/libvirt/cpu_map.xml
+%{_datadir}/libvirt/libvirtLogo.png
%if %{with_systemd}
%{_unitdir}/libvirt-guests.service
%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
%endif
+%if %{with_lxc}
+%files login-shell
+%attr(4750, root, virtlogin) %{_bindir}/virt-login-shell
+%config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf
+%{_mandir}/man1/virt-login-shell.1*
+%endif
+
%files devel
%defattr(-, root, root)
%doc docs/*.html docs/html docs/*.gif
%doc docs/libvirt-api.xml
%doc examples/hellolibvirt
-%doc examples/domain-events/events-c
+%doc examples/object-events
%doc examples/dominfo
%doc examples/domsuspend
%doc examples/openauth
%doc examples/xml
%doc examples/systemtap
-%if %{with_python}
-%files python
-%defattr(-, root, root)
+%changelog
+* Fri Mar 21 2014 Thierry Parmentelat <thierry.parmentelat@sophia.inria.fr> - libvirt-1.2.1-1
+- builds fine on f{18,20}
-%doc AUTHORS NEWS README COPYING.LIB
-%{_libdir}/python*/site-packages/libvirt.py*
-%{_libdir}/python*/site-packages/libvirt_qemu.py*
-%{_libdir}/python*/site-packages/libvirt_lxc.py*
-%{_libdir}/python*/site-packages/libvirtmod*
-%doc python/tests/*.py
-%doc python/TODO
-%doc examples/python
-%doc examples/domain-events/events-python
-%endif
+* Mon Jan 27 2014 Cole Robinson <crobinso@redhat.com> - 1.2.1-2
+- Rebuild for openwsman soname bump
-%changelog
-* Thu Mar 07 2013 Thierry Parmentelat <thierry.parmentelat@sophia.inria.fr> - libvirt-1.0.2-2
-- turn off fuse no matter what, as this conflicts with the way procprotect works
-
-* Wed Jan 30 2013 Daniel Veillard <veillard@redhat.com> - 1.0.2-1
-- LXC improvements
-- S390 architecture improvement
-- Power architecture improvement
-- large Coverity report cleanups and associated bug fixes
-- virTypedParams* APIs to helps with those data structures
-- a lot of bug fixes and overall improvements
-
-* Fri Nov 2 2012 Daniel Veillard <veillard@redhat.com> - 1.0.0-1
-- virNodeGetCPUMap: Define public API
-- Add systemd journal support
-- Add a qemu capabilities cache manager
-- USB migration support
-- various improvement and fixes when using QMP QEmu interface
-- Support for Xen 4.2
-- Lot of localization enhancements
-- a lot of bug fixes, improvements and portability work
+* Tue Jan 21 2014 Daniel P. Berrange <berrange@redhat.com> - 1.2.1-1
+- Update to 1.2.1 release
+
+* Mon Dec 2 2013 Daniel P. Berrange <berrange@redhat.com> - 1.2.0-1
+- Update to 1.2.0 release with python in a separate srpm
+
+* Tue Nov 12 2013 Cole Robinson <crobinso@redhat.com> - 1.1.4-2
+- virsh nodedev-detach fails if device has no driver (bz #1028629)
+
+* Mon Nov 4 2013 Daniel Veillard <veillard@redhat.com> - 1.1.4-1
+- upstream release of 1.1.4
+- Add support for AArch64 architecture
+- Various improvements on test code and test driver
+- a lot of bug fixes and various improvements
+
+* Sun Oct 06 2013 Cole Robinson <crobinso@redhat.com> - 1.1.3-2
+- Allow QoS change with update-device (bz #1014200)
+- Fix nwfilter crash during firewalld install (bz #1014762)
+- Fix crash with nographics (bz #1014088)
+
+* Tue Oct 1 2013 Daniel Veillard <veillard@redhat.com> - 1.1.3-1
+- VMware: Initial VMware Fusion support and various improvements
+- libvirt: add new public API virConnectGetCPUModelNames
+- various libxl driver improvements
+- LXC many container driver improvement
+- ARM cpu improvements
+- a lot of bug and leak fixes and various improvements
+
+* Tue Sep 24 2013 Cole Robinson <crobinso@redhat.com> - 1.1.2-4
+- Fix snapshot restore when VM has disabled usb support (bz #1011520)
+
+* Mon Sep 23 2013 Cole Robinson <crobinso@redhat.com> - 1.1.2-3
+- Sync with v1.1.2-maint
+- Rebuild for libswan soname bump (bz #1009701)
+- CVE-2013-4311: Insecure polkit usage (bz #1009539, bz #1005332)
+- CVE-2013-4296: Invalid free memory stats (bz #1006173, bz #1009667)
+- CVE-2013-4297: Invalid free in NBDDeviceAssociate (bz #1006505, bz #1006511)
+- Fix virsh block-commit abort (bz #1010056)
+
+* Wed Sep 18 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.2-2
+- Rebuild for soname break in openswman package
+
+* Mon Sep 2 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.2-1
+- Update to 1.1.2 release
+
+* Tue Aug 20 2013 Cole Robinson <crobinso@redhat.com> - 1.1.1-3
+- Fix launching ARM guests on x86 (patches posted upstream, F20 feature)
+
+* Wed Aug 14 2013 Cole Robinson <crobinso@redhat.com> - 1.1.1-2
+- CVE-2013-4239: xen: memory corruption in legacy driver (bz #996241, bz
+ #996244)
+
+* Tue Jul 30 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.1-1
+- Update to 1.1.1 release
+
+* Sun Jul 28 2013 Dennis Gilmore <dennis@ausil.us> - 1.1.0-5
+- fix doc path in libvirt-python
+
+* Thu Jul 25 2013 Cole Robinson <crobinso@redhat.com> - 1.1.0-4
+- CVE-2013-4153: Fix double free of returned JSON (bz #986408, bz #986383)
+- CVE-2013-4154: Crash of libvirtd if guest agent not configured (bz #986386,
+ bz #986406)
+
+* Wed Jul 17 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.0-3
+- Rebuild for change in Xen library ABI/soname
+
+* Thu Jul 11 2013 Cole Robinson <crobinso@redhat.com> - 1.1.0-2
+- CVE-2013-2230 libvirt: multiple registered events crash
+
+* Mon Jul 1 2013 Daniel Veillard <veillard@redhat.com> - 1.1.0-1
+- CVE-2013-2218: Fix crash listing network interfaces with filters
+- Fine grained ACL support for the API
+- Extensible migration APIs
+- various improvements in the Xen driver
+- agent based vCPU hotplug support
+- various bug fixes and improvements including localizations
+
+* Fri Jun 14 2013 Peter Robinson <pbrobinson@fedoraproject.org> 1.0.6-3
+- Enable KVM support on ARM
+
+* Sat Jun 08 2013 Cole Robinson <crobinso@redhat.com> - 1.0.6-2
+- Drop bogus dep on vbox
+
+* Mon Jun 3 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.6-1
+- Update to 1.0.6 release
+
+* Sun May 19 2013 Cole Robinson <crobinso@redhat.com> - 1.0.5.1-1
+- Rebased to version 1.0.5.1
+- Follow updated packaging guidelines for user alloc (bz #924501)
+- CVE-2013-1962 Open files DoS (bz #963789, bz #953107)
+
+* Tue May 14 2013 Cole Robinson <crobinso@redhat.com> - 1.0.5-3
+- Fix stream operations like screenshot (bz #960879)
+
+* Fri May 3 2013 Richard W.M. Jones <rjones@redhat.com> - 1.0.5-2
+- Fix network driver when using qemu:///session (bz #958907).
+
+* Thu May 2 2013 Daniel Veillard <veillard@redhat.com> - 1.0.5-1
+- Update to 1.0.5 release
+- add support for NVRAM device
+- Add XML config for resource partitions
+- Add support for TPM
+- NPIV storage migration support
+- various bug fixes and improvements including localizations
+
+* Mon Apr 1 2013 Daniel Veillard <veillard@redhat.com> - 1.0.4-1
+- Update to 1.0.4 release
+
+* Tue Mar 5 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.3-1
+- Update to 1.0.3 release
+
+* Thu Feb 28 2013 Richard W.M. Jones <rjones@redhat.com> - 1.0.2-4
+- Backport "qemu: check backing chains even when cgroup is omitted"
+ (RHBZ#896685).
+- Disable virnettlscontexttest which apparently fails because of
+ a broken gnutls3. Note since this patch touches Makefile.am, I
+ have enabled autoreconf (enable_autotools).
+
+* Tue Feb 5 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.2-2
+- Fix missing python binding constants
+
+* Fri Feb 1 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.2-1
+- Update to 1.0.2 release
+
+* Tue Jan 29 2013 Cole Robinson <crobinso@redhat.com> - 1.0.1-6
+- Fix network persistence after define (bz #890492)
+
+* Mon Jan 28 2013 Cole Robinson <crobinso@redhat.com> - 1.0.1-5
+- CVE-2013-0170 libvirt: use-after-free in virNetMessageFree() (bz #893450, bz
+ #905173)
+
+* Sun Jan 20 2013 Richard W.M. Jones <rjones@redhat.com> - 1.0.1-4
+- Rebuild for libnl soname breakage (RHBZ#901569).
+
+* Fri Jan 18 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.1-3
+- Rebuild for libnl3 soname change
+- Deal with broken kernel headers
+
+* Mon Dec 17 2012 Cole Robinson <crobinso@redhat.com> - 1.0.1-2
+- Fix scriplet warning when uninstalling libvirt-client (bz #888071)
+
+* Mon Dec 17 2012 Daniel Veillard <veillard@redhat.com> - 1.0.1-1
+- Update to 1.0.1 release
+
+* Thu Nov 8 2012 Daniel P. Berrange <berrange@redhat.com> - 1.0.0-1
+- Update to 1.0.0 release
+
+* Tue Oct 30 2012 Cole Robinson <crobinso@redhat.com> - 0.10.2.1-2
+- Disable libxl on F18 too
+
+* Sat Oct 27 2012 Cole Robinson <crobinso@redhat.com> - 0.10.2.1-1
+- Rebased to version 0.10.2.1
+- Fix lvm volume creation when alloc=0 (bz #866481)
+- Clarify virsh send-keys man page example (bz #860004)
+- Fix occasional deadlock via virDomainDestroy (bz #859009)
+- Fix LXC deadlock from ctrl-c (bz #848119)
+- Fix occasional selinux denials with macvtap (bz #798605)
+- Fix multilib conflict with systemtap files (bz #831425)
+- Don't trigger keytab warning in system logs (bz #745203)
+- Fix qemu domxml-2-native NIC model out (bz #636832)
+- Fix error message if not enough space for lvm vol (bz #609104)
+
+* Thu Oct 25 2012 Cole Robinson <crobinso@redhat.com> - 0.10.2-4
+- Disable libxl driver, since it doesn't build with xen 4.2 in rawhide
+
+* Mon Sep 24 2012 Richard W.M. Jones <rjones@redhat.com> - 0.10.2-3
+- Re-add Use-qemu-system-i386-as-binary-instead-of-qemu.patch
+ NB: This patch is Fedora-specific and not upstream.
+- Add upstream patches: don't duplicate environment variables (RHBZ#859596).
* Mon Sep 24 2012 Daniel Veillard <veillard@redhat.com> - 0.10.2-1
+- Upstream release 0.10.2
- network: define new API virNetworkUpdate
- add support for QEmu sandbox support
- blockjob: add virDomainBlockCommit
- qemu: Support for Block Device IO Limits
- a lot of bug fixes, improvements and portability work
+* Fri Sep 21 2012 Richard W.M. Jones <rjones@redhat.com> - 0.10.1-5
+- Add (upstream) patches to label sockets for SELinux (RHBZ#853393).
+
+* Thu Sep 13 2012 Richard W.M. Jones <rjones@redhat.com> - 0.10.1-4
+- Fix for 32 bit qemu renamed to qemu-system-i386 (RHBZ#857026).
+
+* Wed Sep 12 2012 Cole Robinson <crobinso@redhat.com> - 0.10.1-3
+- Fix libvirtd segfault with old netcf-libs (bz 853381)
+- Drop unneeded dnsmasq --filterwin2k
+- Fix unwanted connection closing, needed for boxes
+
+* Wed Sep 5 2012 Daniel P. Berrange <berrange@redhat.com> - 0.10.1-2
+- Remove dep on ceph RPM (rhbz #854360)
+
* Fri Aug 31 2012 Daniel Veillard <veillard@redhat.com> - 0.10.1-1
-- bugfixes and a brown paper bag
+- upstream release of 0.10.1
+- many fixes from 0.10.0
* Wed Aug 29 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-1
+- upstream release of 0.10.0
- agent: add qemuAgentArbitraryCommand() for general qemu agent command
- Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
- network: use firewalld instead of iptables, when available
- Add virDomainGetHostname
- a lot of bug fixes, improvements and portability work
+* Thu Aug 23 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-0rc1
+- release candidate 1 of 0.10.0
+
+* Tue Aug 14 2012 Daniel P. Berrange <berrange@redhat.com> - 0.10.0-0rc0.2
+- Enable autotools to make previous patch work
+
+* Tue Aug 14 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-0rc0.1
+- fix security driver missing from the daemon
+
+* Wed Aug 8 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-0rc0
+- snapshot before 0.10.0 in a few weeks
+- adds the parallel driver support
+
+* Mon Jul 23 2012 Richard W.M. Jones <rjones@redhat.com> - 0.9.13-3
+- Add upstream patch to fix RHBZ#842114.
+
+* Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.9.13-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
* Mon Jul 2 2012 Daniel Veillard <veillard@redhat.com> - 0.9.13-1
- S390: support for s390(x)
- snapshot: implement new APIs for esx and vbox
- blockjob: add new APIs
- a lot of bug fixes, improvements and portability work
-* Tue Apr 3 2012 Daniel Veillard <veillard@redhat.com> - 0.9.11-1
-- Add support for the suspend event
-- Add support for event tray moved of removable disks
-- qemu: Support numad
-- cpustats: API, improvements and qemu support
-- qemu: support type='hostdev' network devices at domain start
-- Introduce virDomainPMWakeup API
-- network: support Open vSwitch
-- a number of snapshot improvements
-- many improvements and bug fixes
+* Thu Apr 26 2012 Cole Robinson <crobinso@redhat.com> - 0.9.11.3-1
+- Rebased to version 0.9.11.3
+- Abide URI username when connecting to hypervisor (bz 811397)
+- Fix managed USB mode (bz 814866)
+- Fix crash connecting to ESX host (bz 811891)
-* Mon Feb 13 2012 Daniel Veillard <veillard@redhat.com> - 0.9.10-1
-- Add support for sVirt in the LXC driver
-- block rebase: add new API virDomainBlockRebase
-- API: Add api to set and get domain metadata
-- virDomainGetDiskErrors public API
-- conf: add rawio attribute to disk element of domain XML
-- Add new public API virDomainGetCPUStats()
-- Introduce virDomainPMSuspendForDuration API
-- resize: add virStorageVolResize() API
-- Add a virt-host-validate command to sanity check HV config
-- Add new virDomainShutdownFlags API
-- QEMU guest agent support
-- many improvements and bug fixes
+* Wed Apr 4 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.11-1
+- Update to 0.9.11 release
+
+* Tue Apr 3 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-4
+- Revert previous change
+
+* Sat Mar 31 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-3
+- Refactor RPM spec to allow install without default configs
+
+* Thu Mar 15 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-2
+- Rebuild for libparted soname break
+
+* Mon Feb 13 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-1
+- Update to 0.9.10
+
+* Thu Jan 12 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.9-2
+- Fix LXC I/O handling
* Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
- Add API virDomain{S,G}etInterfaceParameters
- Support Xen domctl v8
- many improvements and bug fixes
+* Thu Dec 8 2011 Daniel P. Berrange <berrange@redhat.com> - 0.9.8-2
+- Fix install of libvirt-guests.service & libvirtd.service
+
* Thu Dec 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.8-1
- Add support for QEMU 1.0
- Add preliminary PPC cpu driver
- Add support for STP and VLAN filtering
- many improvements and bug fixes
-* Tue Nov 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.7-1
-- esx: support vSphere 5.x
-- vbox: support for VirtualBox 4.1
-- Introduce the virDomainOpenGraphics API
-- Add AHCI support to qemu driver
-- snapshot: many improvements and 2 new APIs
-- api: Add public api for 'reset'
-- many improvements and bug fixes
+* Mon Nov 14 2011 Justin M. Forbes <jforbes@redhat.com> - 0.9.7-3
+- Remove versioned buildreq for yajl as 2.0.x features are not required.
+
+* Thu Nov 10 2011 Daniel P. Berrange <berrange@redhat.com> - 0.9.7-2
+- Rebuild for yajl 2.0.1
+
+* Tue Nov 8 2011 Daniel P. Berrange <berrange@redhat.com> - 0.9.7-1
+- Update to 0.9.7 release
+
+* Tue Oct 11 2011 Dan Horák <dan[at]danny.cz> - 0.9.6-3
+- xenlight available only on Xen arches (#745020)
+
+* Mon Oct 3 2011 Laine Stump <laine@redhat.com> - 0.9.6-2
+- Make PCI multifunction support more manual - Bug 742836
+- F15 build still uses cgconfig - Bug 738725
* Thu Sep 22 2011 Daniel Veillard <veillard@redhat.com> - 0.9.6-1
- Fix the qemu reboot bug and a few others bug fixes
- various missing python binding
- many improvements and bug fixes
+* Sat Jul 30 2011 Dan Hor?k <dan[at]danny.cz> - 0.9.3-3
+- xenlight available only on Xen arches
+
+* Wed Jul 6 2011 Peter Robinson <pbrobinson@gmail.com> - 0.9.3-2
+- Add ARM to NUMA platform excludes
+
* Mon Jul 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.3-1
- new API virDomainGetVcpupinInfo
- Add TXT record support for virtual DNS service
- lxc: various improvements
- many improvements and bug fixes
+* Wed Jun 29 2011 Richard W.M. Jones <rjones@redhat.com> - 0.9.2-3
+- Rebuild because of libparted soname bump (libparted.so.0 -> libparted.so.1).
+
+* Tue Jun 21 2011 Laine Stump <laine@redhat.com> - 0.9.2-2
+- add rule to require netcf-0.1.8 during build so that new transactional
+ network change APIs are included.
+- document that CVE-2011-2178 has been fixed (by virtue of rebase
+ to 0.9.2 - see https://bugzilla.redhat.com/show_bug.cgi?id=709777)
+
* Mon Jun 6 2011 Daniel Veillard <veillard@redhat.com> - 0.9.2-1
- Framework for lock manager plugins
- API for network config change transactions
- public API for NMI injection
- Various improvements and bug fixes
+* Wed May 25 2011 Richard W.M. Jones <rjones@redhat.com> - 0.9.1-3
+- Add upstream patches:
+ 0001-json-Avoid-passing-large-positive-64-bit-integers-to.patch
+ 0001-qemudDomainMemoryPeek-change-ownership-selinux-label.patch
+ 0002-remote-remove-bogus-virDomainFree.patch
+ so that users can try out virt-dmesg.
+- Change /var/cache mode to 0711.
+
* Thu May 5 2011 Daniel Veillard <veillard@redhat.com> - 0.9.1-1
- support various persistent domain updates
- improvements on memory APIs
- Spice: support audio, images and stream compression
- Various improvements and bug fixes
-* Mon Apr 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
+* Thu Apr 7 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
- Support cputune cpu usage tuning
- Add public APIs for storage volume upload/download
- Add public API for setting migration speed on the fly
- Audit support
- Various improvements and bug fixes
+* Mon Mar 14 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-3
+- fix a lack of API check on read-only connections
+- CVE-2011-1146
+
+* Mon Feb 21 2011 Daniel P. Berrange <berrange@redhat.com> - 0.8.8-2
+- Fix kernel boot with latest QEMU
+
* Thu Feb 17 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-1
- expose new API for sysinfo extraction
- cgroup blkio weight support
- qemu: Support per-device boot ordering
- Various improvements and bug fixes
-* Tue Jan 4 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
+* Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.8.7-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+
+* Thu Jan 6 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
- Preliminary support for VirtualBox 4.0
- IPv6 support
- Add VMware Workstation and Player driver driver
- Add network disk support
- Various improvements and bug fixes
-
-* Tue Nov 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.6-1
+- from 0.8.6:
- Add support for iSCSI target auto-discovery
- QED: Basic support for QED images
- remote console support
- Memory parameter controls
- various improvements and bug fixes
-* Fri Sep 10 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
-- big improvements to UML driver
-- various improvements and bug fixes
+* Wed Sep 29 2010 jkeating - 0.8.4-3
+- Rebuilt for gcc bug 634757
-* Wed Aug 4 2010 Daniel Veillard <veillard@redhat.com> - 0.8.3-1
-- esx: Support vSphere 4.1
-- Qemu arbitrary monitor commands
-- Qemu Monitor API entry point
-- various improvements and bug fixes
+* Thu Sep 16 2010 Dan Horák <dan[at]danny.cz> - 0.8.4-2
+- disable the nwfilterxml2xmltest also on s390(x)
+
+* Mon Sep 13 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
+- Upstream release 0.8.4
+
+* Mon Aug 23 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.3-2
+- Fix potential overflow in boot menu code
+
+* Mon Aug 23 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.3-1
+- Upstream release 0.8.3
+
+* Wed Jul 21 2010 David Malcolm <dmalcolm@redhat.com> - 0.8.2-3
+- Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
+
+* Mon Jul 12 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.2-2
+- CVE-2010-2237 ignoring defined main disk format when looking up disk backing stores
+- CVE-2010-2238 ignoring defined disk backing store format when recursing into disk
+ image backing stores
+- CVE-2010-2239 not setting user defined backing store format when creating new image
+- CVE-2010-2242 libvirt: improperly mapped source privileged ports may allow for
+ obtaining privileged resources on the host
* Mon Jul 5 2010 Daniel Veillard <veillard@redhat.com> - 0.8.2-1
+- Upstream release 0.8.2
- phyp: adding support for IVM
- libvirt: introduce domainCreateWithFlags API
- add 802.1Qbh and 802.1Qbg switches handling
- qemu: live migration with non-shared storage for kvm
* Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
+- Upstream release 0.8.1
- Starts dnsmasq from libvirtd with --dhcp-hostsfile
- Add virDomainGetBlockInfo API to query disk sizing
- a lot of bug fixes and cleanups
* Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
+- Upstream release 0.8.0
- Snapshotting support (QEmu/VBox/ESX)
- Network filtering API
- XenAPI driver
- volume wiping API
- and many bug fixes
+* Tue Mar 30 2010 Richard W.M. Jones <rjones@redhat.com> - 0.7.7-3.fc14
+- No change, just rebuild against new libparted with bumped soname.
+
+* Mon Mar 22 2010 Cole Robinson <crobinso@redhat.com> - 0.7.7-2.fc14
+- Fix USB devices by product with security enabled (bz 574136)
+- Set kernel/initrd in security driver, fixes some URL installs (bz 566425)
+
* Fri Mar 5 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
- macvtap support
- async job handling
- virDomain{Attach,Detach}DeviceFlags
- assorted bug fixes and lots of cleanups
+* Tue Feb 16 2010 Adam Jackson <ajax@redhat.com> 0.7.6-2
+- libvirt-0.7.6-add-needed.patch: Fix FTBFS from --no-add-needed
+- Add BuildRequires: xmlrpc-c-client for libxmlrpc_client.so
+
* Wed Feb 3 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1
+- upstream release of 0.7.6
+- Use QEmu new device adressing when possible
+- Implement CPU topology support for QEMU driver
+- Implement SCSI controller hotplug/unplug for QEMU
+- Implement support for multi IQN
+- a lot of fixes and improvements
+
+* Thu Jan 14 2010 Chris Weyl <cweyl@alumni.drew.edu> 0.7.5-3
+- bump for libssh2 rebuild
+
+* Tue Jan 12 2010 Daniel P. Berrange <berrange@redhat.com> - 0.7.5-2
+- Rebuild for libparted soname change
* Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
- Add new API virDomainMemoryStats
- Support QEMU's virtual FAT block device driver
- a lot of fixes
-* Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.3-1
+* Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.4-1
+- upstream release of 0.7.4
- udev node device backend
- API to check object properties
- better QEmu monitor processing
- support IPv6 and multiple addresses per interfaces
- a lot of fixes
+* Thu Nov 19 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-6
+- Really fix restore file labelling this time
+
+* Wed Nov 11 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-5
+- Disable numactl on s390[x]. Again.
+
+* Wed Nov 11 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-4
+- Fix QEMU save/restore permissions / labelling
+
+* Thu Oct 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.2-3
+- Avoid compressing small log files (#531030)
+
+* Thu Oct 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.2-2
+- Make libvirt-devel require libvirt-client, not libvirt
+- Fix qemu machine types handling
+
+* Wed Oct 14 2009 Daniel Veillard <veillard@redhat.com> - 0.7.2-1
+- Upstream release of 0.7.2
+- Allow to define ESX domains
+- Allows suspend and resulme of LXC domains
+- API for data streams
+- many bug fixes
+
+* Tue Oct 13 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-12
+- Fix restore of qemu guest using raw save format (#523158)
+
+* Fri Oct 9 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-11
+- Fix libvirtd memory leak during error reply sending (#528162)
+- Add several PCI hot-unplug typo fixes from upstream
+
+* Tue Oct 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-10
+- Create /var/log/libvirt/{lxc,uml} dirs for logrotate
+- Make libvirt-python dependon on libvirt-client
+- Sync misc minor changes from upstream spec
+
+* Tue Oct 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-9
+- Change logrotate config to weekly (#526769)
+
+* Thu Oct 1 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-8
+- Disable sound backend, even when selinux is disabled (#524499)
+- Re-label qcow2 backing files (#497131)
+
+* Wed Sep 30 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-7
+- Fix USB device passthrough (#522683)
+
+* Mon Sep 21 2009 Chris Weyl <cweyl@alumni.drew.edu> - 0.7.1-6
+- rebuild for libssh2 1.2
+
+* Mon Sep 21 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-5
+- Don't set a bogus error in virDrvSupportsFeature()
+- Fix raw save format
+
+* Thu Sep 17 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-4
+- A couple of hot-unplug memory handling fixes (#523953)
+
+* Thu Sep 17 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-3
+- disable numactl on s390[x]
+
+* Thu Sep 17 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-2
+- revamp of spec file for modularity and RHELs
+
* Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
+- Upstream release of 0.7.1
- ESX, VBox driver updates
- mutipath support
- support for encrypted (qcow) volume
- configuration of huge pages in guests
- a lot of fixes
+* Mon Sep 14 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.2.gitfac3f4c
+- Update to newer snapshot of 0.7.1
+- Stop libvirt using untrusted 'info vcpus' PID data (#520864)
+- Support relabelling of USB and PCI devices
+- Enable multipath storage support
+- Restart libvirtd upon RPM upgrade
+
+* Sun Sep 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.1.gitg3ef2e05
+- Update to pre-release git snapshot of 0.7.1
+- Drop upstreamed patches
+
+* Wed Aug 19 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-6
+- Fix migration completion with newer versions of qemu (#516187)
+
+* Wed Aug 19 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-5
+- Add PCI host device hotplug support
+- Allow PCI bus reset to reset other devices (#499678)
+- Fix stupid PCI reset error message (bug #499678)
+- Allow PM reset on multi-function PCI devices (bug #515689)
+- Re-attach PCI host devices after guest shuts down (bug #499561)
+- Fix list corruption after disk hot-unplug
+- Fix minor 'virsh nodedev-list --tree' annoyance
+
+* Thu Aug 13 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.0-4
+- Rewrite policykit support (rhbz #499970)
+- Log and ignore NUMA topology problems (rhbz #506590)
+
+* Mon Aug 10 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-3
+- Don't fail to start network if ipv6 modules is not loaded (#516497)
+
+* Thu Aug 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-2
+- Make sure qemu can access kernel/initrd (bug #516034)
+- Set perms on /var/lib/libvirt/boot to 0711 (bug #516034)
+
* Wed Aug 5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
- ESX, VBox3, Power Hypervisor drivers
- new net filesystem glusterfs
* Fri Apr 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
- release of 0.6.2
-* Fri Mar 4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
+* Wed Mar 4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
- release of 0.6.1
* Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
* Wed Nov 2 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1
- created
+
git://git.onelab.eu / libvirt.git / blobdiff