# RHEL-5 builds are client-only for s390, ppc
%if 0%{?rhel} == 5
-%ifnarch i386 i586 i686 x86_64 ia64
+%ifnarch %{ix86} x86_64 ia64
%define client_only 1
%endif
%endif
%define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
%define with_avahi 0%{!?_without_avahi:%{server_drivers}}
-# Then the hypervisor drivers that run on local host
+# Then the hypervisor drivers that run in libvirtd
%define with_xen 0%{!?_without_xen:%{server_drivers}}
%define with_qemu 0%{!?_without_qemu:%{server_drivers}}
-%define with_openvz 0%{!?_without_openvz:%{server_drivers}}
%define with_lxc 0%{!?_without_lxc:%{server_drivers}}
-%define with_vbox 0%{!?_without_vbox:%{server_drivers}}
%define with_uml 0%{!?_without_uml:%{server_drivers}}
%define with_libxl 0%{!?_without_libxl:%{server_drivers}}
-%define with_vmware 0%{!?_without_vmware:%{server_drivers}}
-# Then the hypervisor drivers that talk via a native remote protocol
+%define with_qemu_tcg %{with_qemu}
+# Change if we ever provide qemu-kvm binaries on non-x86 hosts
+%ifarch %{ix86} x86_64
+%define with_qemu_kvm %{with_qemu}
+%else
+%define with_qemu_kvm 0
+%endif
+
+# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
+%define with_openvz 0%{!?_without_openvz:1}
+%define with_vbox 0%{!?_without_vbox:1}
+%define with_vmware 0%{!?_without_vmware:1}
%define with_phyp 0%{!?_without_phyp:1}
%define with_esx 0%{!?_without_esx:1}
%define with_hyperv 0%{!?_without_hyperv:1}
%define with_xenapi 0%{!?_without_xenapi:1}
-# Then the secondary host drivers
+# Then the secondary host drivers, which run inside libvirtd
%define with_network 0%{!?_without_network:%{server_drivers}}
%define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
%define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
%define with_cgconfig 0%{!?_without_cgconfig:0}
%define with_sanlock 0%{!?_without_sanlock:0}
%define with_systemd 0%{!?_without_systemd:0}
+%define with_numad 0%{!?_without_numad:0}
# Non-server/HV driver defaults which are always enabled
%define with_python 0%{!?_without_python:1}
# Finally set the OS / architecture specific special cases
# Xen is available only on i386 x86_64 ia64
-%ifnarch i386 i586 i686 x86_64 ia64
+%ifnarch %{ix86} x86_64 ia64
%define with_xen 0
%define with_libxl 0
%endif
# RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
%if 0%{?rhel} == 5
+%define with_qemu_tcg 0
%ifnarch x86_64
%define with_qemu 0
+%define with_qemu_kvm 0
%endif
%define with_lxc 0
%endif
# RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
# on all archs. Other archs all have LXC available though
%if 0%{?rhel} >= 6
+%define with_qemu_tcg 0
%ifnarch x86_64
%define with_qemu 0
+%define with_qemu_kvm 0
%endif
%define with_xen 0
%endif
-# Fedora doesn't have any QEMU on ppc64 - only ppc
-%if 0%{?fedora}
+# Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
+%if 0%{?fedora} && 0%{?fedora} < 16
%ifarch ppc64
%define with_qemu 0
%endif
%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
%endif
%if 0%{?rhel} >= 6
-%ifarch i386 i586 i686 x86_64
+%ifarch %{ix86} x86_64
%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
%endif
%endif
%define with_storage_disk 0
%endif
-# Enable libpcap library
-%if %{with_qemu}
+%if %{with_qemu} || %{with_lxc} || %{with_uml}
%define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
+# Enable libpcap library
%define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
%define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
+
+# numad is used to manage the CPU and memory placement dynamically,
+# it's not available on s390[x] and ARM.
+%if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
+%ifnarch s390 s390x %{arm}
+%define with_numad 0%{!?_without_numad:%{server_drivers}}
+%endif
+%endif
%endif
%if %{with_macvtap}
Summary: Library providing a simple virtualization API
Name: libvirt
-Version: 0.9.9
+Version: 0.9.12
Release: 1%{?dist}%{?extra_release}
License: LGPLv2+
Group: Development/Libraries
-Source: http://libvirt.org/sources/libvirt-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
URL: http://libvirt.org/
-# All runtime requirements for the libvirt package (runtime requrements
-# for subpackages are listed later in those subpackages)
-
-# The client side, i.e. shared libs and virsh are in a subpackage
-Requires: %{name}-client = %{version}-%{release}
+%if %(echo %{version} | grep -o \\. | wc -l) == 3
+%define mainturl stable_updates/
+%endif
+Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
-# Used by many of the drivers, so turn it on whenever the
-# daemon is present
%if %{with_libvirtd}
-# for modprobe of pci devices
-Requires: module-init-tools
-# for /sbin/ip & /sbin/tc
-Requires: iproute
-%if %{with_avahi}
-Requires: avahi
-%endif
-%endif
+Requires: libvirt-daemon = %{version}-%{release}
%if %{with_network}
-Requires: dnsmasq >= 2.41
-Requires: radvd
-%endif
-%if %{with_network} || %{with_nwfilter}
-Requires: iptables
-Requires: iptables-ipv6
+Requires: libvirt-daemon-config-network = %{version}-%{release}
%endif
%if %{with_nwfilter}
-Requires: ebtables
-%endif
-# needed for device enumeration
-%if %{with_hal}
-Requires: hal
-%endif
-%if %{with_udev}
-Requires: udev >= 145
-%endif
-%if %{with_polkit}
-%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
-Requires: polkit >= 0.93
-%else
-Requires: PolicyKit >= 0.6
-%endif
-%endif
-%if %{with_storage_fs}
-Requires: nfs-utils
-# For mkfs
-Requires: util-linux-ng
-# For pool-build probing for existing pools
-BuildRequires: libblkid-devel >= 2.17
-# For glusterfs
-%if 0%{?fedora} >= 11
-Requires: glusterfs-client >= 2.0.1
-%endif
-%endif
-%if %{with_qemu}
-# From QEMU RPMs
-Requires: /usr/bin/qemu-img
-# For image compression
-Requires: gzip
-Requires: bzip2
-Requires: lzop
-Requires: xz
-%else
-%if %{with_xen}
-# From Xen RPMs
-Requires: /usr/sbin/qcow-create
-%endif
-%endif
-%if %{with_storage_lvm}
-# For LVM drivers
-Requires: lvm2
-%endif
-%if %{with_storage_iscsi}
-# For ISCSI driver
-Requires: iscsi-initiator-utils
-%endif
-%if %{with_storage_disk}
-# For disk driver
-Requires: parted
-Requires: device-mapper
-%endif
-%if %{with_storage_mpath}
-# For multipath support
-Requires: device-mapper
-%endif
-%if %{with_cgconfig}
-Requires: libcgroup
+Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
%endif
-# For virConnectGetSysinfo
-Requires: dmidecode
-# For service management
-%if %{with_systemd}
-Requires(post): systemd-units
-Requires(post): systemd-sysv
-Requires(preun): systemd-units
-Requires(postun): systemd-units
+# XXX when we turn on driver modules, we need to add
+# deps on each driver (Requires: libvirt-daemon-drv-qemu)
%endif
+Requires: libvirt-client = %{version}-%{release}
-# All build-time requirements
+# All build-time requirements. Run-time requirements are
+# listed against each sub-RPM
%if 0%{?enable_autotools}
BuildRequires: autoconf
BuildRequires: automake
# Fedora build root suckage
BuildRequires: gawk
+# For storage wiping with different algorithms
+BuildRequires: scrub
+
+%if %{with_numad}
+BuildRequires: numad
+%endif
+
%description
Libvirt is a C toolkit to interact with the virtualization capabilities
of recent versions of Linux (and other OSes). The main package includes
the libvirtd server exporting the virtualization support.
+%package docs
+Summary: API reference and website documentation
+Group: Development/Libraries
+
+%description docs
+Includes the API reference for the libvirt C library, and a complete
+copy of the libvirt.org website documentation.
+
+%if %{with_libvirtd}
+%package daemon
+Summary: Server side daemon and supporting files for libvirt library
+Group: Development/Libraries
+
+# All runtime requirements for the libvirt package (runtime requrements
+# for subpackages are listed later in those subpackages)
+
+# The client side, i.e. shared libs and virsh are in a subpackage
+Requires: %{name}-client = %{version}-%{release}
+
+# for modprobe of pci devices
+Requires: module-init-tools
+# for /sbin/ip & /sbin/tc
+Requires: iproute
+%if %{with_avahi}
+Requires: avahi-libs
+%endif
+%if %{with_network}
+Requires: dnsmasq >= 2.41
+Requires: radvd
+%endif
+%if %{with_network} || %{with_nwfilter}
+Requires: iptables
+Requires: iptables-ipv6
+%endif
+%if %{with_nwfilter}
+Requires: ebtables
+%endif
+# needed for device enumeration
+%if %{with_hal}
+Requires: hal
+%endif
+%if %{with_udev}
+Requires: udev >= 145
+%endif
+%if %{with_polkit}
+%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
+Requires: polkit >= 0.93
+%else
+Requires: PolicyKit >= 0.6
+%endif
+%endif
+%if %{with_storage_fs}
+Requires: nfs-utils
+# For mkfs
+Requires: util-linux-ng
+# For pool-build probing for existing pools
+BuildRequires: libblkid-devel >= 2.17
+# For glusterfs
+%if 0%{?fedora} >= 11
+Requires: glusterfs-client >= 2.0.1
+%endif
+%endif
+%if %{with_qemu}
+# From QEMU RPMs
+Requires: /usr/bin/qemu-img
+# For image compression
+Requires: gzip
+Requires: bzip2
+Requires: lzop
+Requires: xz
+%else
+%if %{with_xen}
+# From Xen RPMs
+Requires: /usr/sbin/qcow-create
+%endif
+%endif
+%if %{with_storage_lvm}
+# For LVM drivers
+Requires: lvm2
+%endif
+%if %{with_storage_iscsi}
+# For ISCSI driver
+Requires: iscsi-initiator-utils
+%endif
+%if %{with_storage_disk}
+# For disk driver
+Requires: parted
+Requires: device-mapper
+%endif
+%if %{with_storage_mpath}
+# For multipath support
+Requires: device-mapper
+%endif
+%if %{with_cgconfig}
+Requires: libcgroup
+%endif
+%ifarch %{ix86} x86_64 ia64
+# For virConnectGetSysinfo
+Requires: dmidecode
+%endif
+# For service management
+%if %{with_systemd}
+Requires(post): systemd-units
+Requires(post): systemd-sysv
+Requires(preun): systemd-units
+Requires(postun): systemd-units
+%endif
+%if %{with_numad}
+Requires: numad
+%endif
+
+%description daemon
+Server side daemon required to manage the virtualization capabilities
+of recent versions of Linux. Requires a hypervisor specific sub-RPM
+for specific drivers.
+
+%if %{with_network}
+%package daemon-config-network
+Summary: Default configuration files for the libvirtd daemon
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-config-network
+Default configuration files for setting up NAT based networking
+%endif
+
+%if %{with_nwfilter}
+%package daemon-config-nwfilter
+Summary: Network filter configuration files for the libvirtd daemon
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-config-nwfilter
+Network filter configuration files for cleaning guest traffic
+%endif
+
+# XXX when we turn on driver modules, we will need to
+# create daemon-drv-XXX sub-RPMs and add them as deps
+# to all of the following daemon-XXX RPMs
+
+%if %{with_qemu_tcg}
+%package daemon-qemu
+Summary: Server side daemon & driver required to run QEMU guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: qemu
+
+%description daemon-qemu
+Server side daemon and driver required to manage the virtualization
+capabilities of the QEMU TCG emulators
+%endif
+
+
+%if %{with_qemu_kvm}
+%package daemon-kvm
+Summary: Server side daemon & driver required to run KVM guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: qemu-kvm
+
+%description daemon-kvm
+Server side daemon and driver required to manage the virtualization
+capabilities of the KVM hypervisor
+%endif
+
+
+%if %{with_lxc}
+%package daemon-lxc
+Summary: Server side daemon & driver required to run LXC guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-lxc
+Server side daemon and driver required to manage the virtualization
+capabilities of LXC
+%endif
+
+
+%if %{with_uml}
+%package daemon-uml
+Summary: Server side daemon & driver required to run UML guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+# There are no UML kernel RPMs in Fedora/RHEL to depend on.
+
+%description daemon-uml
+Server side daemon and driver required to manage the virtualization
+capabilities of UML
+%endif
+
+
+%if %{with_xen} || %{with_libxl}
+%package daemon-xen
+Summary: Server side daemon & driver required to run XEN guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: xen
+
+%description daemon-xen
+Server side daemon and driver required to manage the virtualization
+capabilities of XEN
+%endif
+%endif
+
%package client
Summary: Client side library and utilities of the libvirt library
Group: Development/Libraries
Summary: Libraries, includes, etc. to compile with the libvirt library
Group: Development/Libraries
Requires: %{name}-client = %{version}-%{release}
+Requires: %{name}-docs = %{version}-%{release}
Requires: pkgconfig
-%if %{with_xen}
-Requires: xen-devel
-%endif
%description devel
-Includes and documentations for the C library providing an API to use
-the virtualization capabilities of recent versions of Linux (and other OSes).
+Include header files & development libraries for the libvirt C library.
-#%if %{with_sanlock}
-#%package lock-sanlock
-#Summary: Sanlock lock manager plugin for QEMU driver
-#Group: Development/Libraries
-#Requires: sanlock >= 1.8
-##for virt-sanlock-cleanup require augeas
-#Requires: augeas
-#Requires: %{name} = %{version}-%{release}
-
-#%description lock-sanlock
-#Includes the Sanlock lock manager plugin for the QEMU
-#driver
-#%endif
+%if %{with_sanlock}
+%package lock-sanlock
+Summary: Sanlock lock manager plugin for QEMU driver
+Group: Development/Libraries
+Requires: sanlock >= 1.8
+#for virt-sanlock-cleanup require augeas
+Requires: augeas
+Requires: %{name} = %{version}-%{release}
+
+%description lock-sanlock
+Includes the Sanlock lock manager plugin for the QEMU
+driver
+%endif
%if %{with_python}
%package python
%define _without_numactl --without-numactl
%endif
+%if ! %{with_numad}
+%define _without_numad --without-numad
+%endif
+
%if ! %{with_capng}
%define _without_capng --without-capng
%endif
%{?_without_openvz} \
%{?_without_lxc} \
%{?_without_vbox} \
+ %{?_without_libxl} \
%{?_without_xenapi} \
%{?_without_sasl} \
%{?_without_avahi} \
%{?_without_storage_disk} \
%{?_without_storage_mpath} \
%{?_without_numactl} \
+ %{?_without_numad} \
%{?_without_capng} \
%{?_without_netcf} \
%{?_without_selinux} \
%{?_without_dtrace} \
%{with_packager} \
%{with_packager_version} \
- --with-capng \
- --with-udev \
--with-qemu-user=%{qemu_user} \
--with-qemu-group=%{qemu_group} \
- %{init_scripts} \
- --with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid
+ --with-capng \
+ --with-udev \
+ %{init_scripts}
make %{?_smp_mflags}
gzip -9 ChangeLog
rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
%endif
-%if %{client_only}
-rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version}
-%endif
-
-%if ! %{with_libvirtd}
-rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter
-mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version}/html \
- $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-devel-%{version}/
-%endif
-
%if ! %{with_qemu}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
%endif
+mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} \
+ $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
+
%clean
rm -fr %{buildroot}
done
#make check
-%pre
+%if %{with_libvirtd}
+%pre daemon
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# Normally 'setup' adds this in /etc/passwd, but this is
# here for case of upgrades from earlier Fedora/RHEL. This
-c "qemu user" qemu
%endif
-%post
+%post daemon
-%if %{with_libvirtd}
%if %{with_network}
-# We want to install the default network for initial RPM installs
-# or on the first upgrade from a non-network aware libvirt only.
-# We check this by looking to see if the daemon is already installed
-if ! /sbin/chkconfig libvirtd && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml
-then
- UUID=`/usr/bin/uuidgen`
- sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
- < %{_datadir}/libvirt/networks/default.xml \
- > %{_sysconfdir}/libvirt/qemu/networks/default.xml
- ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
-fi
-
# All newly defined networks will have a mac address for the bridge
# auto-generated, but networks already existing at the time of upgrade
# will not. We need to go through all the network configs, look for
/sbin/service libvirtd condrestart > /dev/null 2>&1
fi
%endif
-%endif
-%preun
-%if %{with_libvirtd}
+%preun daemon
%if %{with_systemd}
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
/sbin/chkconfig --del libvirtd
fi
%endif
-%endif
-%postun
-%if %{with_libvirtd}
+%postun daemon
%if %{with_systemd}
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -ge 1 ] ; then
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
fi
%endif
+
+%if %{with_network}
+%post daemon-config-network
+if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
+ UUID=`/usr/bin/uuidgen`
+ sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
+ < %{_datadir}/libvirt/networks/default.xml \
+ > %{_sysconfdir}/libvirt/qemu/networks/default.xml
+ ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
+fi
+%endif
%endif
%if %{with_libvirtd}
%if %{with_systemd}
%else
/sbin/chkconfig --add libvirt-guests
-if [ $1 -ge 1 ]; then
- level=$(/sbin/runlevel | /bin/cut -d ' ' -f 2)
- if /sbin/chkconfig --levels $level libvirt-guests; then
- # this doesn't do anything but allowing for libvirt-guests to be
- # stopped on the first shutdown
- /sbin/service libvirt-guests start > /dev/null 2>&1 || true
- fi
-fi
%endif
%postun client -p /sbin/ldconfig
/bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
%endif
-%if %{with_libvirtd}
%files
%defattr(-, root, root)
+%files docs
+%defattr(-, root, root)
+# Website
+%dir %{_datadir}/doc/libvirt-docs-%{version}
+%dir %{_datadir}/doc/libvirt-docs-%{version}/html
+%{_datadir}/doc/libvirt-docs-%{version}/html/*
+
+# API docs
+%dir %{_datadir}/gtk-doc/html/libvirt/
+%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
+%doc %{_datadir}/gtk-doc/html/libvirt/*.html
+%doc %{_datadir}/gtk-doc/html/libvirt/*.png
+%doc %{_datadir}/gtk-doc/html/libvirt/*.css
+
+%if %{with_libvirtd}
+%files daemon
+%defattr(-, root, root)
+
%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
%endif
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
-%{_sysconfdir}/libvirt/nwfilter/*.xml
%{_sysconfdir}/rc.d/init.d/libvirtd
%if %{with_systemd}
%else
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/sysctl.d/libvirtd
%endif
-%if %{with_dtrace}
-%{_datadir}/systemtap/tapset/libvirt_probes.stp
-%{_datadir}/systemtap/tapset/libvirt_functions.stp
-%endif
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
%{_mandir}/man8/libvirtd.8*
-%doc docs/*.xml
+%if %{with_network}
+%files daemon-config-network
+%defattr(-, root, root)
+%endif
+
+%if %{with_nwfilter}
+%files daemon-config-nwfilter
+%defattr(-, root, root)
+%{_sysconfdir}/libvirt/nwfilter/*.xml
+%endif
+
+%if %{with_qemu_tcg}
+%files daemon-qemu
+%defattr(-, root, root)
+%endif
+
+%if %{with_qemu_kvm}
+%files daemon-kvm
+%defattr(-, root, root)
+%endif
+
+%if %{with_lxc}
+%files daemon-lxc
+%defattr(-, root, root)
+%endif
+
+%if %{with_uml}
+%files daemon-uml
+%defattr(-, root, root)
+%endif
+
+%if %{with_xen} || %{with_libxl}
+%files daemon-xen
+%defattr(-, root, root)
+%endif
%endif
#%if %{with_sanlock}
%{_mandir}/man1/virsh.1*
%{_mandir}/man1/virt-xml-validate.1*
%{_mandir}/man1/virt-pki-validate.1*
+%{_mandir}/man1/virt-host-validate.1*
%{_bindir}/virsh
%{_bindir}/virt-xml-validate
%{_bindir}/virt-pki-validate
+%{_bindir}/virt-host-validate
%{_libdir}/lib*.so.*
+%if %{with_dtrace}
+%{_datadir}/systemtap/tapset/libvirt_probes.stp
+%{_datadir}/systemtap/tapset/libvirt_functions.stp
+%endif
+
%dir %{_datadir}/libvirt/
%dir %{_datadir}/libvirt/schemas/
%dir %{_includedir}/libvirt
%{_includedir}/libvirt/*.h
%{_libdir}/pkgconfig/libvirt.pc
-%dir %{_datadir}/gtk-doc/html/libvirt/
-%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
-%doc %{_datadir}/gtk-doc/html/libvirt/*.html
-%doc %{_datadir}/gtk-doc/html/libvirt/*.png
-%doc %{_datadir}/gtk-doc/html/libvirt/*.css
+
+%dir %{_datadir}/libvirt/api/
+%{_datadir}/libvirt/api/libvirt-api.xml
+%{_datadir}/libvirt/api/libvirt-qemu-api.xml
%doc docs/*.html docs/html docs/*.gif
%doc docs/libvirt-api.xml
%endif
%changelog
+* Mon May 14 2012 Daniel Veillard <veillard@redhat.com> - 0.9.12-1
+- qemu: allow snapshotting of sheepdog and rbd disks
+- blockjob: add new APIs
+- a lot of bug fixes, improvements and portability work
+
+* Tue Apr 3 2012 Daniel Veillard <veillard@redhat.com> - 0.9.11-1
+- Add support for the suspend event
+- Add support for event tray moved of removable disks
+- qemu: Support numad
+- cpustats: API, improvements and qemu support
+- qemu: support type='hostdev' network devices at domain start
+- Introduce virDomainPMWakeup API
+- network: support Open vSwitch
+- a number of snapshot improvements
+- many improvements and bug fixes
+
+* Mon Feb 13 2012 Daniel Veillard <veillard@redhat.com> - 0.9.10-1
+- Add support for sVirt in the LXC driver
+- block rebase: add new API virDomainBlockRebase
+- API: Add api to set and get domain metadata
+- virDomainGetDiskErrors public API
+- conf: add rawio attribute to disk element of domain XML
+- Add new public API virDomainGetCPUStats()
+- Introduce virDomainPMSuspendForDuration API
+- resize: add virStorageVolResize() API
+- Add a virt-host-validate command to sanity check HV config
+- Add new virDomainShutdownFlags API
+- QEMU guest agent support
+- many improvements and bug fixes
+
* Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
- Add API virDomain{S,G}etInterfaceParameters
- Add API virDomain{G, S}etNumaParameters
git://git.onelab.eu / libvirt.git / commitdiff