X-Git-Url: http://git.onelab.eu/?p=linux-2.6.git;a=blobdiff_plain;f=arch%2Farm%2Fmach-pxa%2Flubbock.c;fp=arch%2Farm%2Fmach-pxa%2Flubbock.c;h=055de7f4f00ad113c730f13e2ccba025ec6b3e8d;hp=3e26d7ce5bb287c4aca023c7d9edbb6cd1ad82c7;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hpb=76828883507a47dae78837ab5dec5a5b4513c667 diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 3e26d7ce5..055de7f4f 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -22,6 +22,10 @@ #include #include +#include +#include +#include + #include #include #include @@ -74,14 +78,14 @@ static void lubbock_unmask_irq(unsigned int irq) LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq)); } -static struct irqchip lubbock_irq_chip = { +static struct irq_chip lubbock_irq_chip = { + .name = "FPGA", .ack = lubbock_mask_irq, .mask = lubbock_mask_irq, .unmask = lubbock_unmask_irq, }; -static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc, - struct pt_regs *regs) +static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; do { @@ -89,7 +93,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc, if (likely(pending)) { irq = LUBBOCK_IRQ(0) + __ffs(pending); desc = irq_desc + irq; - desc_handle_irq(irq, desc, regs); + desc_handle_irq(irq, desc); } pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; } while (pending); @@ -104,7 +108,7 @@ static void __init lubbock_init_irq(void) /* setup extra lubbock irqs */ for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) { set_irq_chip(irq, &lubbock_irq_chip); - set_irq_handler(irq, do_level_IRQ); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } @@ -196,6 +200,78 @@ static struct resource smc91x_resources[] = { }, }; +/* ADS7846 is connected through SSP ... and if your board has J5 populated, + * you can select it to replace the ucb1400 by switching the touchscreen cable + * (to J5) and poking board registers (as done below). Else it's only useful + * for the temperature sensors. + */ +static struct resource pxa_ssp_resources[] = { + [0] = { + .start = __PREG(SSCR0_P(1)), + .end = __PREG(SSCR0_P(1)) + 0x14, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP, + .end = IRQ_SSP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct pxa2xx_spi_master pxa_ssp_master_info = { + .ssp_type = PXA25x_SSP, + .clock_enable = CKEN3_SSP, + .num_chipselect = 0, +}; + +static struct platform_device pxa_ssp = { + .name = "pxa2xx-spi", + .id = 1, + .resource = pxa_ssp_resources, + .num_resources = ARRAY_SIZE(pxa_ssp_resources), + .dev = { + .platform_data = &pxa_ssp_master_info, + }, +}; + +static int lubbock_ads7846_pendown_state(void) +{ + /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */ + return 0; +} + +static struct ads7846_platform_data ads_info = { + .model = 7846, + .vref_delay_usecs = 100, /* internal, no cap */ + .get_pendown_state = lubbock_ads7846_pendown_state, + // .x_plate_ohms = 500, /* GUESS! */ + // .y_plate_ohms = 500, /* GUESS! */ +}; + +static void ads7846_cs(u32 command) +{ + static const unsigned TS_nCS = 1 << 11; + lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS); +} + +static struct pxa2xx_spi_chip ads_hw = { + .tx_threshold = 1, + .rx_threshold = 2, + .cs_control = ads7846_cs, +}; + +static struct spi_board_info spi_board_info[] __initdata = { { + .modalias = "ads7846", + .platform_data = &ads_info, + .controller_data = &ads_hw, + .irq = LUBBOCK_BB_IRQ, + .max_speed_hz = 120000 /* max sample rate at 3V */ + * 26 /* command + data + overhead */, + .bus_num = 1, + .chip_select = 0, +}, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, @@ -272,9 +348,10 @@ static struct platform_device *devices[] __initdata = { &smc91x_device, &lubbock_flash_device[0], &lubbock_flash_device[1], + &pxa_ssp, }; -static struct pxafb_mach_info sharp_lm8v31 __initdata = { +static struct pxafb_mode_info sharp_lm8v31_mode = { .pixclock = 270000, .xres = 640, .yres = 480, @@ -287,6 +364,11 @@ static struct pxafb_mach_info sharp_lm8v31 __initdata = { .lower_margin = 0, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info sharp_lm8v31 = { + .modes = &sharp_lm8v31_mode, + .num_modes = 1, .cmap_inverse = 0, .cmap_static = 0, .lccr0 = LCCR0_SDS, @@ -296,7 +378,7 @@ static struct pxafb_mach_info sharp_lm8v31 __initdata = { #define MMC_POLL_RATE msecs_to_jiffies(1000) static void lubbock_mmc_poll(unsigned long); -static irqreturn_t (*mmc_detect_int)(int, void *, struct pt_regs *); +static irq_handler_t mmc_detect_int; static struct timer_list mmc_timer = { .function = lubbock_mmc_poll, @@ -315,22 +397,22 @@ static void lubbock_mmc_poll(unsigned long data) if (LUB_IRQ_SET_CLR & (1 << 0)) mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE); else { - (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL); + (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data); enable_irq(LUBBOCK_SD_IRQ); } } -static irqreturn_t lubbock_detect_int(int irq, void *data, struct pt_regs *regs) +static irqreturn_t lubbock_detect_int(int irq, void *data) { /* IRQ is level triggered; disable, and poll for removal */ disable_irq(irq); mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE); - return mmc_detect_int(irq, data, regs); + return mmc_detect_int(irq, data); } static int lubbock_mci_init(struct device *dev, - irqreturn_t (*detect_int)(int, void *, struct pt_regs *), + irq_handler_t detect_int, void *data) { /* setup GPIO for PXA25x MMC controller */ @@ -342,7 +424,7 @@ static int lubbock_mci_init(struct device *dev, init_timer(&mmc_timer); mmc_timer.data = (unsigned long) data; return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int, - SA_SAMPLE_RANDOM, "lubbock-sd-detect", data); + IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data); } static int lubbock_mci_get_ro(struct device *dev) @@ -400,6 +482,8 @@ static void __init lubbock_init(void) lubbock_flash_data[flashboot^1].name = "application-flash"; lubbock_flash_data[flashboot].name = "boot-rom"; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); } static struct map_desc lubbock_io_desc[] __initdata = { @@ -416,6 +500,11 @@ static void __init lubbock_map_io(void) pxa_map_io(); iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc)); + /* SSP data pins */ + pxa_gpio_mode(GPIO23_SCLK_MD); + pxa_gpio_mode(GPIO25_STXD_MD); + pxa_gpio_mode(GPIO26_SRXD_MD); + /* This enables the BTUART */ pxa_gpio_mode(GPIO42_BTRXD_MD); pxa_gpio_mode(GPIO43_BTTXD_MD);