X-Git-Url: http://git.onelab.eu/?p=linux-2.6.git;a=blobdiff_plain;f=arch%2Farm%2Fvfp%2Fvfphw.S;fp=arch%2Farm%2Fvfp%2Fvfphw.S;h=d4b7b229631d5b3fe9db079a3aed284f656beadf;hp=de4ca1223c58556251f440b54d8bf980f8d7c554;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hpb=76828883507a47dae78837ab5dec5a5b4513c667

diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index de4ca1223..d4b7b2296 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -65,6 +65,7 @@
 @  r2  = faulted PC+4
 @  r9  = successful return
 @  r10 = vfp_state union
+@  r11 = CPU number
 @  lr  = failure return
 
 	.globl	vfp_support_entry
@@ -79,7 +80,7 @@ vfp_support_entry:
 	DBGSTR1 "enable %x", r10
 	ldr	r3, last_VFP_context_address
 	orr	r1, r1, #FPEXC_ENABLE	@ user FPEXC has the enable bit set
-	ldr	r4, [r3]		@ last_VFP_context pointer
+	ldr	r4, [r3, r11, lsl #2]	@ last_VFP_context pointer
 	bic	r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled
 	cmp	r4, r10
 	beq	check_for_exception	@ we are returning to the same
@@ -91,7 +92,9 @@ vfp_support_entry:
 					@ exceptions, so we can get at the
 					@ rest of it
 
+#ifndef CONFIG_SMP
 	@ Save out the current registers to the old thread state
+	@ No need for SMP since this is not done lazily
 
 	DBGSTR1	"save old state %p", r4
 	cmp	r4, #0
@@ -102,19 +105,18 @@ vfp_support_entry:
 	VFPFMRX	r8, FPINST2, NE		@ FPINST2 if needed - avoids reading
 					@ nonexistant reg on rev0
 	VFPFSTMIA r4 			@ save the working registers
-	add	r4, r4, #8*16+4
 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
 					@ and point r4 at the word at the
 					@ start of the register dump
+#endif
 
 no_old_VFP_process:
 	DBGSTR1	"load state %p", r10
-	str	r10, [r3]		@ update the last_VFP_context pointer
+	str	r10, [r3, r11, lsl #2]	@ update the last_VFP_context pointer
 					@ Load the saved state back into the VFP
-	add	r4, r10, #8*16+4
-	ldmia	r4, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
 	VFPFLDMIA r10	 		@ reload the working registers while
 					@ FPEXC is in a safe state
+	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
 	tst	r1, #FPEXC_FPV2		@ is there an FPINST2 to write?
 	VFPFMXR	FPINST2, r8, NE		@ FPINST2 if needed - avoids writing
 					@ nonexistant reg on rev0
@@ -164,6 +166,24 @@ process_exception:
 					@ required. If not, the user code will
 					@ retry the faulted instruction
 
+#ifdef CONFIG_SMP
+	.globl	vfp_save_state
+	.type	vfp_save_state, %function
+vfp_save_state:
+	@ Save the current VFP state
+	@ r0 - save location
+	@ r1 - FPEXC
+	DBGSTR1	"save VFP state %p", r0
+	VFPFMRX	r2, FPSCR		@ current status
+	VFPFMRX	r3, FPINST		@ FPINST (always there, rev0 onwards)
+	tst	r1, #FPEXC_FPV2		@ is there an FPINST2 to read?
+	VFPFMRX	r12, FPINST2, NE	@ FPINST2 if needed - avoids reading
+					@ nonexistant reg on rev0
+	VFPFSTMIA r0 			@ save the working registers
+	stmia	r0, {r1, r2, r3, r12}	@ save FPEXC, FPSCR, FPINST, FPINST2
+	mov	pc, lr
+#endif
+
 last_VFP_context_address:
 	.word	last_VFP_context
 
@@ -180,22 +200,21 @@ vfp_get_float:
 
 	.globl	vfp_put_float
 vfp_put_float:
-	add	pc, pc, r0, lsl #3
+	add	pc, pc, r1, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcr	p10, 0, r1, c\dr, c0, 0	@ fmsr	r0, s0
+	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
 	mov	pc, lr
-	mcr	p10, 0, r1, c\dr, c0, 4	@ fmsr	r0, s1
+	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
 	mov	pc, lr
 	.endr
 
 	.globl	vfp_get_double
 vfp_get_double:
-	mov	r0, r0, lsr #1
 	add	pc, pc, r0, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mrrc	p10, 1, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
+	fmrrd	r0, r1, d\dr
 	mov	pc, lr
 	.endr
 
@@ -206,10 +225,9 @@ vfp_get_double:
 
 	.globl	vfp_put_double
 vfp_put_double:
-	mov	r0, r0, lsr #1
-	add	pc, pc, r0, lsl #3
+	add	pc, pc, r2, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcrr	p10, 1, r1, r2, c\dr	@ fmrrd	r1, r2, d\dr
+	fmdrr	d\dr, r0, r1
 	mov	pc, lr
 	.endr