X-Git-Url: http://git.onelab.eu/?p=linux-2.6.git;a=blobdiff_plain;f=drivers%2Fata%2Fpata_cypress.c;fp=drivers%2Fata%2Fpata_cypress.c;h=0da1715f80d47559a2583424b76269067fa8df60;hp=0000000000000000000000000000000000000000;hb=76828883507a47dae78837ab5dec5a5b4513c667;hpb=64ba3f394c830ec48a1c31b53dcae312c56f1604 diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c new file mode 100644 index 000000000..0da1715f8 --- /dev/null +++ b/drivers/ata/pata_cypress.c @@ -0,0 +1,236 @@ +/* + * pata_cypress.c - Cypress PATA for new ATA layer + * (C) 2006 Red Hat Inc + * Alan Cox + * + * Based heavily on + * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cypress" +#define DRV_VERSION "0.1.4" + +/* here are the offset definitions for the registers */ + +enum { + CY82_IDE_CMDREG = 0x04, + CY82_IDE_ADDRSETUP = 0x48, + CY82_IDE_MASTER_IOR = 0x4C, + CY82_IDE_MASTER_IOW = 0x4D, + CY82_IDE_SLAVE_IOR = 0x4E, + CY82_IDE_SLAVE_IOW = 0x4F, + CY82_IDE_MASTER_8BIT = 0x50, + CY82_IDE_SLAVE_8BIT = 0x51, + + CY82_INDEX_PORT = 0x22, + CY82_DATA_PORT = 0x23, + + CY82_INDEX_CTRLREG1 = 0x01, + CY82_INDEX_CHANNEL0 = 0x30, + CY82_INDEX_CHANNEL1 = 0x31, + CY82_INDEX_TIMEOUT = 0x32 +}; + +static int cy82c693_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void cy82c693_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * cy82c693_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + short time_16, time_8; + u32 addr; + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) { + printk(KERN_ERR DRV_NAME ": mome computation failed.\n"); + return; + } + + time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4); + time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4); + + if (adev->devno == 0) { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0x0F; /* Mask bits */ + addr |= FIT(t.setup, 0, 15); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8); + } else { + pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); + + addr &= ~0xF0; /* Mask bits */ + addr |= (FIT(t.setup, 0, 15) << 4); + + pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16); + pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8); + } +} + +/** + * cy82c693_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. + */ + +static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + int reg = CY82_INDEX_CHANNEL0 + ap->port_no; + + /* Be afraid, be very afraid. Magic registers in low I/O space */ + outb(reg, 0x22); + outb(adev->dma_mode - XFER_MW_DMA_0, 0x23); + + /* 0x50 gives the best behaviour on the Alpha's using this chip */ + outb(CY82_INDEX_TIMEOUT, 0x22); + outb(0x50, 0x23); +} + +static struct scsi_host_template cy82c693_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +#ifdef CONFIG_PM + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, +#endif +}; + +static struct ata_port_operations cy82c693_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cy82c693_set_piomode, + .set_dmamode = cy82c693_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = cy82c693_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &cy82c693_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &cy82c693_port_ops + }; + static struct ata_port_info *port_info[1] = { &info }; + + /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. + For the moment we don't handle the secondary. FIXME */ + + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + return ata_pci_init_one(pdev, port_info, 1); +} + +static const struct pci_device_id cy82c693[] = { + { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), }, + + { }, +}; + +static struct pci_driver cy82c693_pci_driver = { + .name = DRV_NAME, + .id_table = cy82c693, + .probe = cy82c693_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +static int __init cy82c693_init(void) +{ + return pci_register_driver(&cy82c693_pci_driver); +} + + +static void __exit cy82c693_exit(void) +{ + pci_unregister_driver(&cy82c693_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cy82c693); +MODULE_VERSION(DRV_VERSION); + +module_init(cy82c693_init); +module_exit(cy82c693_exit);