X-Git-Url: http://git.onelab.eu/?p=linux-2.6.git;a=blobdiff_plain;f=drivers%2Fi2c%2Fbusses%2Fscx200_acb.c;fp=drivers%2Fi2c%2Fbusses%2Fscx200_acb.c;h=766cc969c4d0c784abd0ef926363f2c37c7d735f;hp=1c4159a93623fdfb39eaf32634c925ad1006f709;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hpb=cee37fe97739d85991964371c1f3a745c00dd236 diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 1c4159a93..766cc969c 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -1,30 +1,28 @@ -/* linux/drivers/i2c/scx200_acb.c - +/* Copyright (c) 2001,2002 Christer Weinigel National Semiconductor SCx200 ACCESS.bus support - + Also supports the AMD CS5535 and AMD CS5536 + Based on i2c-keywest.c which is: Copyright (c) 2001 Benjamin Herrenschmidt Copyright (c) 2000 Philip Edelbrock - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - + This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include #include #include #include @@ -33,7 +31,9 @@ #include #include #include +#include #include +#include #include @@ -48,16 +48,7 @@ static int base[MAX_DEVICES] = { 0x820, 0x840 }; module_param_array(base, int, NULL, 0); MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); -#ifdef DEBUG -#define DBG(x...) printk(KERN_DEBUG NAME ": " x) -#else -#define DBG(x...) -#endif - -/* The hardware supports interrupt driven mode too, but I haven't - implemented that. */ -#define POLLED_MODE 1 -#define POLL_TIMEOUT (HZ) +#define POLL_TIMEOUT (HZ/5) enum scx200_acb_state { state_idle, @@ -80,12 +71,11 @@ static const char *scx200_acb_state_name[] = { }; /* Physical interface */ -struct scx200_acb_iface -{ +struct scx200_acb_iface { struct scx200_acb_iface *next; struct i2c_adapter adapter; unsigned base; - struct semaphore sem; + struct mutex mutex; /* State machine data */ enum scx200_acb_state state; @@ -101,7 +91,7 @@ struct scx200_acb_iface #define ACBSDA (iface->base + 0) #define ACBST (iface->base + 1) #define ACBST_SDAST 0x40 /* SDA Status */ -#define ACBST_BER 0x20 +#define ACBST_BER 0x20 #define ACBST_NEGACK 0x10 /* Negative Acknowledge */ #define ACBST_STASTR 0x08 /* Stall After Start */ #define ACBST_MASTER 0x02 @@ -110,9 +100,9 @@ struct scx200_acb_iface #define ACBCTL1 (iface->base + 3) #define ACBCTL1_STASTRE 0x80 #define ACBCTL1_NMINTE 0x40 -#define ACBCTL1_ACK 0x10 -#define ACBCTL1_STOP 0x02 -#define ACBCTL1_START 0x01 +#define ACBCTL1_ACK 0x10 +#define ACBCTL1_STOP 0x02 +#define ACBCTL1_START 0x01 #define ACBADDR (iface->base + 4) #define ACBCTL2 (iface->base + 5) #define ACBCTL2_ENABLE 0x01 @@ -123,8 +113,8 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) { const char *errmsg; - DBG("state %s, status = 0x%02x\n", - scx200_acb_state_name[iface->state], status); + dev_dbg(&iface->adapter.dev, "state %s, status = 0x%02x\n", + scx200_acb_state_name[iface->state], status); if (status & ACBST_BER) { errmsg = "bus error"; @@ -134,8 +124,20 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) errmsg = "not master"; goto error; } - if (status & ACBST_NEGACK) - goto negack; + if (status & ACBST_NEGACK) { + dev_dbg(&iface->adapter.dev, "negative ack in state %s\n", + scx200_acb_state_name[iface->state]); + + iface->state = state_idle; + iface->result = -ENXIO; + + outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); + outb(ACBST_STASTR | ACBST_NEGACK, ACBST); + + /* Reset the status register */ + outb(0, ACBST); + return; + } switch (iface->state) { case state_idle: @@ -161,10 +163,10 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) case state_repeat_start: outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1); /* fallthrough */ - + case state_quick: if (iface->address_byte & 1) { - if (iface->len == 1) + if (iface->len == 1) outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1); else outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1); @@ -203,26 +205,15 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); break; } - + outb(*iface->ptr++, ACBSDA); --iface->len; - + break; } return; - negack: - DBG("negative acknowledge in state %s\n", - scx200_acb_state_name[iface->state]); - - iface->state = state_idle; - iface->result = -ENXIO; - - outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); - outb(ACBST_STASTR | ACBST_NEGACK, ACBST); - return; - error: dev_err(&iface->adapter.dev, "%s in state %s\n", errmsg, scx200_acb_state_name[iface->state]); @@ -232,40 +223,37 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) iface->needs_reset = 1; } -static void scx200_acb_timeout(struct scx200_acb_iface *iface) -{ - dev_err(&iface->adapter.dev, "timeout in state %s\n", - scx200_acb_state_name[iface->state]); - - iface->state = state_idle; - iface->result = -EIO; - iface->needs_reset = 1; -} - -#ifdef POLLED_MODE static void scx200_acb_poll(struct scx200_acb_iface *iface) { - u8 status = 0; + u8 status; unsigned long timeout; timeout = jiffies + POLL_TIMEOUT; while (time_before(jiffies, timeout)) { status = inb(ACBST); + + /* Reset the status register to avoid the hang */ + outb(0, ACBST); + if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) { scx200_acb_machine(iface, status); return; } - msleep(10); + yield(); } - scx200_acb_timeout(iface); + dev_err(&iface->adapter.dev, "timeout in state %s\n", + scx200_acb_state_name[iface->state]); + + iface->state = state_idle; + iface->result = -EIO; + iface->needs_reset = 1; } -#endif /* POLLED_MODE */ static void scx200_acb_reset(struct scx200_acb_iface *iface) { /* Disable the ACCESS.bus device and Configure the SCL - frequency: 16 clock cycles */ + frequency: 16 clock cycles */ outb(0x70, ACBCTL2); /* Polling mode */ outb(0, ACBCTL1); @@ -284,9 +272,9 @@ static void scx200_acb_reset(struct scx200_acb_iface *iface) } static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, - u16 address, unsigned short flags, - char rw, u8 command, int size, - union i2c_smbus_data *data) + u16 address, unsigned short flags, + char rw, u8 command, int size, + union i2c_smbus_data *data) { struct scx200_acb_iface *iface = i2c_get_adapdata(adapter); int len; @@ -296,53 +284,47 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, switch (size) { case I2C_SMBUS_QUICK: - len = 0; - buffer = NULL; - break; + len = 0; + buffer = NULL; + break; + case I2C_SMBUS_BYTE: - if (rw == I2C_SMBUS_READ) { - len = 1; - buffer = &data->byte; - } else { - len = 1; - buffer = &command; - } - break; + len = 1; + buffer = rw ? &data->byte : &command; + break; + case I2C_SMBUS_BYTE_DATA: - len = 1; - buffer = &data->byte; - break; + len = 1; + buffer = &data->byte; + break; + case I2C_SMBUS_WORD_DATA: len = 2; - cur_word = cpu_to_le16(data->word); - buffer = (u8 *)&cur_word; + cur_word = cpu_to_le16(data->word); + buffer = (u8 *)&cur_word; break; + case I2C_SMBUS_BLOCK_DATA: - len = data->block[0]; - buffer = &data->block[1]; + len = data->block[0]; + buffer = &data->block[1]; break; + default: - return -EINVAL; + return -EINVAL; } - DBG("size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n", - size, address, command, len, rw == I2C_SMBUS_READ); + dev_dbg(&adapter->dev, + "size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n", + size, address, command, len, rw); if (!len && rw == I2C_SMBUS_READ) { - dev_warn(&adapter->dev, "zero length read\n"); + dev_dbg(&adapter->dev, "zero length read\n"); return -EINVAL; } - if (len && !buffer) { - dev_warn(&adapter->dev, "nonzero length but no buffer\n"); - return -EFAULT; - } - - down(&iface->sem); + mutex_lock(&iface->mutex); - iface->address_byte = address<<1; - if (rw == I2C_SMBUS_READ) - iface->address_byte |= 1; + iface->address_byte = (address << 1) | rw; iface->command = command; iface->ptr = buffer; iface->len = len; @@ -356,25 +338,21 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, else iface->state = state_address; -#ifdef POLLED_MODE while (iface->state != state_idle) scx200_acb_poll(iface); -#else /* POLLED_MODE */ -#error Interrupt driven mode not implemented -#endif /* POLLED_MODE */ if (iface->needs_reset) scx200_acb_reset(iface); rc = iface->result; - up(&iface->sem); + mutex_unlock(&iface->mutex); if (rc == 0 && size == I2C_SMBUS_WORD_DATA && rw == I2C_SMBUS_READ) - data->word = le16_to_cpu(cur_word); + data->word = le16_to_cpu(cur_word); #ifdef DEBUG - DBG(": transfer done, result: %d", rc); + dev_dbg(&adapter->dev, "transfer done, result: %d", rc); if (buffer) { int i; printk(" data:"); @@ -396,24 +374,23 @@ static u32 scx200_acb_func(struct i2c_adapter *adapter) /* For now, we only handle combined mode (smbus) */ static struct i2c_algorithm scx200_acb_algorithm = { - .name = "NatSemi SCx200 ACCESS.bus", - .id = I2C_ALGO_SMBUS, .smbus_xfer = scx200_acb_smbus_xfer, .functionality = scx200_acb_func, }; static struct scx200_acb_iface *scx200_acb_list; +static DECLARE_MUTEX(scx200_acb_list_mutex); static int scx200_acb_probe(struct scx200_acb_iface *iface) { u8 val; /* Disable the ACCESS.bus device and Configure the SCL - frequency: 16 clock cycles */ + frequency: 16 clock cycles */ outb(0x70, ACBCTL2); if (inb(ACBCTL2) != 0x70) { - DBG("ACBCTL2 readback failed\n"); + pr_debug(NAME ": ACBCTL2 readback failed\n"); return -ENXIO; } @@ -421,7 +398,8 @@ static int scx200_acb_probe(struct scx200_acb_iface *iface) val = inb(ACBCTL1); if (val) { - DBG("disabled, but ACBCTL1=0x%02x\n", val); + pr_debug(NAME ": disabled, but ACBCTL1=0x%02x\n", + val); return -ENXIO; } @@ -431,74 +409,71 @@ static int scx200_acb_probe(struct scx200_acb_iface *iface) val = inb(ACBCTL1); if ((val & ACBCTL1_NMINTE) != ACBCTL1_NMINTE) { - DBG("enabled, but NMINTE won't be set, ACBCTL1=0x%02x\n", val); + pr_debug(NAME ": enabled, but NMINTE won't be set, " + "ACBCTL1=0x%02x\n", val); return -ENXIO; } return 0; } -static int __init scx200_acb_create(int base, int index) +static int __init scx200_acb_create(const char *text, int base, int index) { struct scx200_acb_iface *iface; struct i2c_adapter *adapter; - int rc = 0; - char description[64]; + int rc; - iface = kmalloc(sizeof(*iface), GFP_KERNEL); + iface = kzalloc(sizeof(*iface), GFP_KERNEL); if (!iface) { printk(KERN_ERR NAME ": can't allocate memory\n"); rc = -ENOMEM; goto errout; } - memset(iface, 0, sizeof(*iface)); adapter = &iface->adapter; i2c_set_adapdata(adapter, iface); - snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index); + snprintf(adapter->name, I2C_NAME_SIZE, "%s ACB%d", text, index); adapter->owner = THIS_MODULE; - adapter->id = I2C_ALGO_SMBUS; + adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; adapter->class = I2C_CLASS_HWMON; - init_MUTEX(&iface->sem); + mutex_init(&iface->mutex); - snprintf(description, sizeof(description), "NatSemi SCx200 ACCESS.bus [%s]", adapter->name); - if (request_region(base, 8, description) == 0) { - dev_err(&adapter->dev, "can't allocate io 0x%x-0x%x\n", + if (!request_region(base, 8, adapter->name)) { + printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n", base, base + 8-1); rc = -EBUSY; - goto errout; + goto errout_free; } iface->base = base; rc = scx200_acb_probe(iface); if (rc) { - dev_warn(&adapter->dev, "probe failed\n"); - goto errout; + printk(KERN_WARNING NAME ": probe failed\n"); + goto errout_release; } scx200_acb_reset(iface); if (i2c_add_adapter(adapter) < 0) { - dev_err(&adapter->dev, "failed to register\n"); + printk(KERN_ERR NAME ": failed to register\n"); rc = -ENODEV; - goto errout; + goto errout_release; } - lock_kernel(); + down(&scx200_acb_list_mutex); iface->next = scx200_acb_list; scx200_acb_list = iface; - unlock_kernel(); + up(&scx200_acb_list_mutex); return 0; + errout_release: + release_region(iface->base, 8); + errout_free: + kfree(iface); errout: - if (iface) { - if (iface->base) - release_region(iface->base, 8); - kfree(iface); - } return rc; } @@ -508,22 +483,51 @@ static struct pci_device_id scx200[] = { { }, }; +static struct pci_device_id divil_pci[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, + { } /* NULL entry */ +}; + +#define MSR_LBAR_SMB 0x5140000B + +static __init int scx200_add_cs553x(void) +{ + u32 low, hi; + u32 smb_base; + + /* Grab & reserve the SMB I/O range */ + rdmsr(MSR_LBAR_SMB, low, hi); + + /* Check the IO mask and whether SMB is enabled */ + if (hi != 0x0000F001) { + printk(KERN_WARNING NAME ": SMBus not enabled\n"); + return -ENODEV; + } + + /* SMBus IO size is 8 bytes */ + smb_base = low & 0x0000FFF8; + + return scx200_acb_create("CS5535", smb_base, 0); +} + static int __init scx200_acb_init(void) { int i; - int rc; + int rc = -ENODEV; pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n"); /* Verify that this really is a SCx200 processor */ - if (pci_dev_present(scx200) == 0) - return -ENODEV; + if (pci_dev_present(scx200)) { + for (i = 0; i < MAX_DEVICES; ++i) { + if (base[i] > 0) + rc = scx200_acb_create("SCx200", base[i], i); + } + } else if (pci_dev_present(divil_pci)) + rc = scx200_add_cs553x(); - rc = -ENXIO; - for (i = 0; i < MAX_DEVICES; ++i) { - if (base[i] > 0) - rc = scx200_acb_create(base[i], i); - } + /* If at least one bus was created, init must succeed */ if (scx200_acb_list) return 0; return rc; @@ -532,26 +536,19 @@ static int __init scx200_acb_init(void) static void __exit scx200_acb_cleanup(void) { struct scx200_acb_iface *iface; - lock_kernel(); + + down(&scx200_acb_list_mutex); while ((iface = scx200_acb_list) != NULL) { scx200_acb_list = iface->next; - unlock_kernel(); + up(&scx200_acb_list_mutex); i2c_del_adapter(&iface->adapter); release_region(iface->base, 8); kfree(iface); - lock_kernel(); + down(&scx200_acb_list_mutex); } - unlock_kernel(); + up(&scx200_acb_list_mutex); } module_init(scx200_acb_init); module_exit(scx200_acb_cleanup); - -/* - Local variables: - compile-command: "make -k -C ../.. SUBDIRS=drivers/i2c modules" - c-basic-offset: 8 - End: -*/ -