X-Git-Url: http://git.onelab.eu/?p=linux-2.6.git;a=blobdiff_plain;f=drivers%2Fmessage%2Ffusion%2Flsi%2Fmpi_log_sas.h;fp=drivers%2Fmessage%2Ffusion%2Flsi%2Fmpi_log_sas.h;h=871ebc08b706133de56ea0ef96f5b248dda12aff;hp=9259d1ad6e6e579b47ac61908abfd99c8caa6c09;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hpb=76828883507a47dae78837ab5dec5a5b4513c667 diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h index 9259d1ad6..871ebc08b 100644 --- a/drivers/message/fusion/lsi/mpi_log_sas.h +++ b/drivers/message/fusion/lsi/mpi_log_sas.h @@ -3,43 +3,18 @@ * * * Copyright 2003 LSI Logic Corporation. All rights reserved. * * * - * This file is confidential and a trade secret of LSI Logic. The * - * receipt of or possession of this file does not convey any rights to * - * reproduce or disclose its contents or to manufacture, use, or sell * - * anything it may describe, in whole, or in part, without the specific * - * written consent of LSI Logic Corporation. * + * Description * + * ------------ * + * This include file contains SAS firmware interface IOC Log Info codes * * * - *************************************************************************** - * - * Name: iopiIocLogInfo.h - * Title: SAS Firmware IOP Interface IOC Log Info Definitions - * Programmer: Guy Kendall - * Creation Date: September 24, 2003 - * - * Version History - * --------------- - * - * Last Updated - * ------------- - * Version %version: 22 % - * Date Updated %date_modified: % - * Programmer %created_by: nperucca % - * - * Date Who Description - * -------- --- ------------------------------------------------------- - * 09/24/03 GWK Initial version - * - * - * Description - * ------------ - * This include file contains SAS firmware interface IOC Log Info codes - * - *------------------------------------------------------------------------- + *-------------------------------------------------------------------------* */ #ifndef IOPI_IOCLOGINFO_H_INCLUDED #define IOPI_IOCLOGINFO_H_INCLUDED +#define SAS_LOGINFO_NEXUS_LOSS 0x31170000 +#define SAS_LOGINFO_MASK 0xFFFF0000 /****************************************************************************/ /* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */ @@ -57,6 +32,8 @@ #define IOC_LOGINFO_ORIGINATOR_PL (0x01000000) #define IOC_LOGINFO_ORIGINATOR_IR (0x02000000) +#define IOC_LOGINFO_ORIGINATOR_MASK (0x0F000000) + /****************************************************************************/ /* LOGINFO_CODE defines */ /****************************************************************************/ @@ -76,13 +53,32 @@ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */ + +#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */ + #define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000) +#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */ +#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */ + +#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001) +#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002) +#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003) +#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004) +#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005) /****************************************************************************/ /* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */ /****************************************************************************/ #define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000) +#define PL_LOG_INFO_CODE_OPEN_FAILURE_NO_DEST_TIME_OUT (0x00010001) +#define PL_LOGINFO_CODE_OPEN_FAILURE_BAD_DESTINATION (0x00010011) +#define PL_LOGINFO_CODE_OPEN_FAILURE_PROTOCOL_NOT_SUPPORTED (0x00010013) +#define PL_LOGINFO_CODE_OPEN_FAILURE_STP_RESOURCES_BSY (0x00010018) +#define PL_LOGINFO_CODE_OPEN_FAILURE_WRONG_DESTINATION (0x00010019) +#define PL_LOGINFO_CODE_OPEN_FAILURE_ORR_TIMEOUT (0X0001001A) +#define PL_LOGINFO_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0001001B) +#define PL_LOGINFO_CODE_OPEN_FAILURE_AWT_MAXED (0x0001001C) #define PL_LOGINFO_CODE_INVALID_SGL (0x00020000) #define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000) #define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000) @@ -97,6 +93,7 @@ #define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000) #define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000) #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000) +#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */ @@ -105,11 +102,24 @@ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */ #define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000) -#define PL_LOGINFO_CODE_RESET (0x00110000) -#define PL_LOGINFO_CODE_ABORT (0x00120000) +#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below */ +#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below */ #define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000) #define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000) +#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000) +#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000) +#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000) #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100) +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101) +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */ +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0000011B) +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */ + +#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120) +#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */ +#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */ + + #define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200) #define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300) #define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) @@ -123,36 +133,119 @@ #define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00) #define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00) #define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00) +#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01) +#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00) #define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000) #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */ -#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200001) /* Error occured on SMP Read */ -#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200002) /* Error occured on SMP Write */ -#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200004) /* Encl Mgmt services not available for this WWID */ -#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200005) /* Address Mode not suppored */ -#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200006) /* Invalid Slot Number in SEP Msg */ -#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200007) /* SGPIO not present/enabled */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */ +#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */ +#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */ +#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */ +#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */ +#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */ +#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */ #define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */ #define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */ #define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */ #define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */ -#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200104) /* SEP stopped or sent bad chksum in Hdr */ -#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200105) /* SEP returned unknown scsi status */ -#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200106) /* SEP returned unknown scsi status */ -#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x00200107) /* SEP returned bad chksum after STOP */ -#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/ +#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */ +#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */ +#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */ +#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode */ /****************************************************************************/ /* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */ /****************************************************************************/ -#define IR_LOGINFO_CODE_UNUSED1 (0x00010000) -#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) +#define IR_LOGINFO_RAID_ACTION_ERROR (0x00010000) +#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) + +/* Amount of information passed down for Create Volume is too large */ +#define IR_LOGINFO_VOLUME_CREATE_INVALID_LENGTH (0x00010001) +/* Creation of duplicate volume attempted (Bus/Target ID checked) */ +#define IR_LOGINFO_VOLUME_CREATE_DUPLICATE (0x00010002) +/* Creation failed due to maximum number of supported volumes exceeded */ +#define IR_LOGINFO_VOLUME_CREATE_NO_SLOTS (0x00010003) +/* Creation failed due to DMA error in trying to read from host */ +#define IR_LOGINFO_VOLUME_CREATE_DMA_ERROR (0x00010004) +/* Creation failed due to invalid volume type passed down */ +#define IR_LOGINFO_VOLUME_CREATE_INVALID_VOLUME_TYPE (0x00010005) +/* Creation failed due to error reading MFG Page 4 */ +#define IR_LOGINFO_VOLUME_MFG_PAGE4_ERROR (0x00010006) +/* Creation failed when trying to create internal structures */ +#define IR_LOGINFO_VOLUME_INTERNAL_CONFIG_STRUCTURE_ERROR (0x00010007) + +/* Activation failed due to trying to activate an already active volume */ +#define IR_LOGINFO_VOLUME_ACTIVATING_AN_ACTIVE_VOLUME (0x00010010) +/* Activation failed due to trying to active unsupported volume type */ +#define IR_LOGINFO_VOLUME_ACTIVATING_INVALID_VOLUME_TYPE (0x00010011) +/* Activation failed due to trying to active too many volumes */ +#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_VOLUMES (0x00010012) +/* Activation failed due to Volume ID in use already */ +#define IR_LOGINFO_VOLUME_ACTIVATING_VOLUME_ID_IN_USE (0x00010013) +/* Activation failed call to activateVolume returned failure */ +#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED (0x00010014) +/* Activation failed trying to import the volume */ +#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED (0x00010015) + +/* Phys Disk failed, too many phys disks */ +#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS (0x00010020) +/* Amount of information passed down for Create Pnysdisk is too large */ +#define IR_LOGINFO_PHYSDISK_CREATE_INVALID_LENGTH (0x00010021) +/* Creation failed due to DMA error in trying to read from host */ +#define IR_LOGINFO_PHYSDISK_CREATE_DMA_ERROR (0x00010022) +/* Creation failed due to invalid Bus TargetID passed down */ +#define IR_LOGINFO_PHYSDISK_CREATE_BUS_TID_INVALID (0x00010023) +/* Creation failed due to error in creating RAID Phys Disk Config Page */ +#define IR_LOGINFO_PHYSDISK_CREATE_CONFIG_PAGE_ERROR (0x00010024) + + +/* Compatibility Error : IR Disabled */ +#define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED (0x00010030) +/* Compatibility Error : Inquiry Comand failed */ +#define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED (0x00010031) +/* Compatibility Error : Device not direct access device */ +#define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS (0x00010032) +/* Compatibility Error : Removable device found */ +#define IR_LOGINFO_COMPAT_ERROR_REMOVABLE_FOUND (0x00010033) +/* Compatibility Error : Device SCSI Version not 2 or higher */ +#define IR_LOGINFO_COMPAT_ERROR_NEED_SCSI_2_OR_HIGHER (0x00010034) +/* Compatibility Error : SATA device, 48 BIT LBA not supported */ +#define IR_LOGINFO_COMPAT_ERROR_SATA_48BIT_LBA_NOT_SUPPORTED (0x00010035) +/* Compatibility Error : Device does not have 512 byte block sizes */ +#define IR_LOGINFO_COMPAT_ERROR_DEVICE_NOT_512_BYTE_BLOCK (0x00010036) +/* Compatibility Error : Volume Type check failed */ +#define IR_LOGINFO_COMPAT_ERROR_VOLUME_TYPE_CHECK_FAILED (0x00010037) +/* Compatibility Error : Volume Type is unsupported by FW */ +#define IR_LOGINFO_COMPAT_ERROR_UNSUPPORTED_VOLUME_TYPE (0x00010038) +/* Compatibility Error : Disk drive too small for use in volume */ +#define IR_LOGINFO_COMPAT_ERROR_DISK_TOO_SMALL (0x00010039) +/* Compatibility Error : Phys disk for Create Volume not found */ +#define IR_LOGINFO_COMPAT_ERROR_PHYS_DISK_NOT_FOUND (0x0001003A) +/* Compatibility Error : membership count error, too many or too few disks for volume type */ +#define IR_LOGINFO_COMPAT_ERROR_MEMBERSHIP_COUNT (0x0001003B) +/* Compatibility Error : Disk stripe sizes must be 64KB */ +#define IR_LOGINFO_COMPAT_ERROR_NON_64K_STRIPE_SIZE (0x0001003C) +/* Compatibility Error : IME size limited to < 2TB */ +#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D) + /****************************************************************************/ -/* Defines for convienence */ +/* Defines for convenience */ /****************************************************************************/ #define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP) #define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL)