X-Git-Url: http://git.onelab.eu/?p=linux-2.6.git;a=blobdiff_plain;f=include%2Fasm-powerpc%2Fhvcall.h;fp=include%2Fasm-powerpc%2Fhvcall.h;h=38ca9ad6110d6640b37a1b0e06bd8ed50599abbc;hp=0d3c4e85711a680fe4a9ee4768d676342c322990;hb=64ba3f394c830ec48a1c31b53dcae312c56f1604;hpb=be1e6109ac94a859551f8e1774eb9a8469fe055c diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h index 0d3c4e857..38ca9ad61 100644 --- a/include/asm-powerpc/hvcall.h +++ b/include/asm-powerpc/hvcall.h @@ -4,88 +4,46 @@ #define HVSC .long 0x44000022 -#define H_SUCCESS 0 -#define H_BUSY 1 /* Hardware busy -- retry later */ -#define H_CLOSED 2 /* Resource closed */ -#define H_NOT_AVAILABLE 3 -#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ -#define H_PARTIAL 5 -#define H_IN_PROGRESS 14 /* Kind of like busy */ -#define H_PAGE_REGISTERED 15 -#define H_PARTIAL_STORE 16 -#define H_PENDING 17 /* returned from H_POLL_PENDING */ -#define H_CONTINUE 18 /* Returned from H_Join on success */ -#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ -#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ - is a good time to retry */ -#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ -#define H_HARDWARE -1 /* Hardware error */ -#define H_FUNCTION -2 /* Function not supported */ -#define H_PRIVILEGE -3 /* Caller not privileged */ -#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ -#define H_BAD_MODE -5 /* Illegal msr value */ -#define H_PTEG_FULL -6 /* PTEG is full */ -#define H_NOT_FOUND -7 /* PTE was not found" */ -#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ -#define H_NO_MEM -9 -#define H_AUTHORITY -10 -#define H_PERMISSION -11 -#define H_DROPPED -12 -#define H_SOURCE_PARM -13 -#define H_DEST_PARM -14 -#define H_REMOTE_PARM -15 -#define H_RESOURCE -16 -#define H_ADAPTER_PARM -17 -#define H_RH_PARM -18 -#define H_RCQ_PARM -19 -#define H_SCQ_PARM -20 -#define H_EQ_PARM -21 -#define H_RT_PARM -22 -#define H_ST_PARM -23 -#define H_SIGT_PARM -24 -#define H_TOKEN_PARM -25 -#define H_MLENGTH_PARM -27 -#define H_MEM_PARM -28 -#define H_MEM_ACCESS_PARM -29 -#define H_ATTR_PARM -30 -#define H_PORT_PARM -31 -#define H_MCG_PARM -32 -#define H_VL_PARM -33 -#define H_TSIZE_PARM -34 -#define H_TRACE_PARM -35 - -#define H_MASK_PARM -37 -#define H_MCG_FULL -38 -#define H_ALIAS_EXIST -39 -#define H_P_COUNTER -40 -#define H_TABLE_FULL -41 -#define H_ALT_TABLE -42 -#define H_MR_CONDITION -43 -#define H_NOT_ENOUGH_RESOURCES -44 -#define H_R_STATE -45 -#define H_RESCINDEND -46 - +#define H_Success 0 +#define H_Busy 1 /* Hardware busy -- retry later */ +#define H_Closed 2 /* Resource closed */ +#define H_Constrained 4 /* Resource request constrained to max allowed */ +#define H_InProgress 14 /* Kind of like busy */ +#define H_Continue 18 /* Returned from H_Join on success */ +#define H_LongBusyStartRange 9900 /* Start of long busy range */ +#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */ +#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */ +#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */ +#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */ +#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */ +#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */ +#define H_LongBusyEndRange 9905 /* End of long busy range */ +#define H_Hardware -1 /* Hardware error */ +#define H_Function -2 /* Function not supported */ +#define H_Privilege -3 /* Caller not privileged */ +#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */ +#define H_Bad_Mode -5 /* Illegal msr value */ +#define H_PTEG_Full -6 /* PTEG is full */ +#define H_Not_Found -7 /* PTE was not found" */ +#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ +#define H_NoMem -9 +#define H_Authority -10 +#define H_Permission -11 +#define H_Dropped -12 +#define H_SourceParm -13 +#define H_DestParm -14 +#define H_RemoteParm -15 +#define H_Resource -16 /* Long Busy is a condition that can be returned by the firmware * when a call cannot be completed now, but the identical call * should be retried later. This prevents calls blocking in the - * firmware for long periods of time. Annoyingly the firmware can return + * firmware for long periods of time. Annoyingly the firmware can return * a range of return codes, hinting at how long we should wait before * retrying. If you don't care for the hint, the macro below is a good * way to check for the long_busy return codes */ -#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ - && (x <= H_LONG_BUSY_END_RANGE)) +#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange)) /* Flags */ #define H_LARGE_PAGE (1UL<<(63-16)) @@ -102,23 +60,11 @@ #define H_PP1 (1UL<<(63-62)) #define H_PP2 (1UL<<(63-63)) -/* VASI States */ -#define H_VASI_INVALID 0 -#define H_VASI_ENABLED 1 -#define H_VASI_ABORTED 2 -#define H_VASI_SUSPENDING 3 -#define H_VASI_SUSPENDED 4 -#define H_VASI_RESUMED 5 -#define H_VASI_COMPLETED 6 - /* DABRX flags */ #define H_DABRX_HYPERVISOR (1UL<<(63-61)) #define H_DABRX_KERNEL (1UL<<(63-62)) #define H_DABRX_USER (1UL<<(63-63)) -/* Each control block has to be on a 4K bondary */ -#define H_CB_ALIGNMENT 4096 - /* pSeries hypervisor opcodes */ #define H_REMOVE 0x04 #define H_ENTER 0x08 @@ -152,54 +98,26 @@ #define H_PERFMON 0x7c #define H_MIGRATE_DMA 0x78 #define H_REGISTER_VPA 0xDC -#define H_CEDE 0xE0 +#define H_CEDE 0xE0 #define H_CONFER 0xE4 -#define H_PROD 0xE8 +#define H_PROD 0xE8 #define H_GET_PPP 0xEC #define H_SET_PPP 0xF0 #define H_PURR 0xF4 -#define H_PIC 0xF8 +#define H_PIC 0xF8 #define H_REG_CRQ 0xFC #define H_FREE_CRQ 0x100 #define H_VIO_SIGNAL 0x104 #define H_SEND_CRQ 0x108 -#define H_COPY_RDMA 0x110 +#define H_COPY_RDMA 0x110 #define H_SET_XDABR 0x134 #define H_STUFF_TCE 0x138 #define H_PUT_TCE_INDIRECT 0x13C #define H_VTERM_PARTNER_INFO 0x150 #define H_REGISTER_VTERM 0x154 #define H_FREE_VTERM 0x158 -#define H_RESET_EVENTS 0x15C -#define H_ALLOC_RESOURCE 0x160 -#define H_FREE_RESOURCE 0x164 -#define H_MODIFY_QP 0x168 -#define H_QUERY_QP 0x16C -#define H_REREGISTER_PMR 0x170 -#define H_REGISTER_SMR 0x174 -#define H_QUERY_MR 0x178 -#define H_QUERY_MW 0x17C -#define H_QUERY_HCA 0x180 -#define H_QUERY_PORT 0x184 -#define H_MODIFY_PORT 0x188 -#define H_DEFINE_AQP1 0x18C -#define H_GET_TRACE_BUFFER 0x190 -#define H_DEFINE_AQP0 0x194 -#define H_RESIZE_MR 0x198 -#define H_ATTACH_MCQP 0x19C -#define H_DETACH_MCQP 0x1A0 -#define H_CREATE_RPT 0x1A4 -#define H_REMOVE_RPT 0x1A8 -#define H_REGISTER_RPAGES 0x1AC -#define H_DISABLE_AND_GETC 0x1B0 -#define H_ERROR_DATA 0x1B4 -#define H_GET_HCA_INFO 0x1B8 -#define H_GET_PERF_COUNT 0x1BC -#define H_MANAGE_TRACE 0x1C0 -#define H_QUERY_INT_STATE 0x1E4 -#define H_POLL_PENDING 0x1D8 +#define H_POLL_PENDING 0x1D8 #define H_JOIN 0x298 -#define H_VASI_STATE 0x2A4 #define H_ENABLE_CRQ 0x2B0 #ifndef __ASSEMBLY__ @@ -233,7 +151,7 @@ long plpar_hcall_norets(unsigned long opcode, ...); */ long plpar_hcall_8arg_2ret(unsigned long opcode, unsigned long arg1, - unsigned long arg2, + unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5, @@ -257,42 +175,6 @@ long plpar_hcall_4out(unsigned long opcode, unsigned long *out3, unsigned long *out4); -long plpar_hcall_7arg_7ret(unsigned long opcode, - unsigned long arg1, - unsigned long arg2, - unsigned long arg3, - unsigned long arg4, - unsigned long arg5, - unsigned long arg6, - unsigned long arg7, - unsigned long *out1, - unsigned long *out2, - unsigned long *out3, - unsigned long *out4, - unsigned long *out5, - unsigned long *out6, - unsigned long *out7); - -long plpar_hcall_9arg_9ret(unsigned long opcode, - unsigned long arg1, - unsigned long arg2, - unsigned long arg3, - unsigned long arg4, - unsigned long arg5, - unsigned long arg6, - unsigned long arg7, - unsigned long arg8, - unsigned long arg9, - unsigned long *out1, - unsigned long *out2, - unsigned long *out3, - unsigned long *out4, - unsigned long *out5, - unsigned long *out6, - unsigned long *out7, - unsigned long *out8, - unsigned long *out9); - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_HVCALL_H */