Setting tag NodeManager-1.8-20

[nodemanager.git] / bwmon.py

diff --git a/bwmon.py b/bwmon.py
index be146f6..91a79f3 100644 (file)
--- a/bwmon.py
+++ b/bwmon.py
@@ -52,14 +52,30 @@ except:
 seconds_per_day = 24 * 60 * 60
 bits_per_byte = 8
 
+dev_default = tools.get_default_if()
 # Burst to line rate (or node cap).  Set by NM. in KBit/s
-default_MaxRate = int(bwlimit.get_bwcap() / 1000)
+default_MaxRate = int(bwlimit.get_bwcap(dev_default) / 1000)
 default_Maxi2Rate = int(bwlimit.bwmax / 1000)
 # 5.4 Gbyte per day. 5.4 * 1024 k * 1024M * 1024G 
 # 5.4 Gbyte per day max allowed transfered per recording period
-default_MaxKByte = 5662310
+# 5.4 Gbytes per day is aprox 512k/s for 24hrs (approx because original math was wrong
+# but its better to keep a higher byte total and keep people happy than correct
+# the problem and piss people off.
+# default_MaxKByte = 5662310
+
+# -- 6/1/09 
+# llp wants to double these, so we use the following
+# 1mbit * 24hrs * 60mins * 60secs = bits/day
+# 1000000 * 24 * 60 * 60 / (1024 * 8)
+default_MaxKByte = 10546875
+
 # 16.4 Gbyte per day max allowed transfered per recording period to I2
-default_Maxi2KByte = 17196646
+# default_Maxi2KByte = 17196646
+
+# -- 6/1/09
+# 3Mb/s for 24hrs a day (30.17 gigs)
+default_Maxi2KByte = 31640625
+
 # Default share quanta
 default_Share = 1
 
@@ -308,7 +324,7 @@ class Slice:
                   (self.name,
                    bwlimit.format_tc_rate(maxrate),
                    bwlimit.format_tc_rate(maxi2rate)), 1)
-            bwlimit.set(xid = self.xid, 
+            bwlimit.set(xid = self.xid, dev = dev_default,
                 minrate = self.MinRate * 1000, 
                 maxrate = self.MaxRate * 1000, 
                 maxexemptrate = self.Maxi2Rate * 1000,
@@ -646,7 +662,8 @@ def sync(nmdbcopy):
     pickle.dump((version, slices, deaddb), f)
     f.close()
 
-
+# doesnt use generic default interface because this runs as its own thread.
+# changing the config variable will not have an effect since GetSlivers: pass
 def getDefaults(nmdbcopy):
     '''
     Get defaults from default slice's slice attributes.
@@ -688,7 +705,7 @@ def run():
         nmdbcopy = copy.deepcopy(database.db)
         database.db_lock.release()
         try:  
-            if getDefaults(nmdbcopy) and len(bwlimit.tc("class show dev eth0")) > 0:
+            if getDefaults(nmdbcopy) and len(bwlimit.tc("class show dev %s" % dev_default)) > 0:
                 # class show to check if net:InitNodeLimit:bwlimit.init has run.
                 sync(nmdbcopy)
             else: logger.log("bwmon:  BW limits DISABLED.")