from sets import Set
# Defaults
-debug = False
-verbose = False
+# Set DEBUG to True if you don't want to send emails
+DEBUG = False
+# Set ENABLE to False to setup buckets, but not limit.
+ENABLE = True
+
datafile = "/var/lib/misc/bwmon.dat"
try:
sys.path.append("/etc/planetlab")
from plc_config import *
except:
+ DEBUG = True
logger.log("bwmon: Warning: Configuration file /etc/planetlab/plc_config.py not found", 2)
logger.log("bwmon: Running in DEBUG mode. Logging to file and not emailing.", 1)
# Burst to line rate (or node cap). Set by NM. in KBit/s
default_MaxRate = int(bwlimit.get_bwcap() / 1000)
default_Maxi2Rate = int(bwlimit.bwmax / 1000)
-# Min rate 8 bits/s
-default_MinRate = 0
-default_Mini2Rate = 0
# 5.4 Gbyte per day. 5.4 * 1024 k * 1024M * 1024G
# 5.4 Gbyte per day max allowed transfered per recording period
default_MaxKByte = 5662310
self.bytes = 0
self.i2bytes = 0
self.MaxRate = default_MaxRate
- self.MinRate = default_MinRate
+ self.MinRate = bwlimit.bwmin / 1000
self.Maxi2Rate = default_Maxi2Rate
- self.Mini2Rate = default_Mini2Rate
+ self.Mini2Rate = bwlimit.bwmin / 1000
self.MaxKByte = default_MaxKByte
- self.ThreshKByte = (.8 * self.MaxKByte)
+ self.ThreshKByte = int(.8 * self.MaxKByte)
self.Maxi2KByte = default_Maxi2KByte
- self.Threshi2KByte = (.8 * self.Maxi2KByte)
+ self.Threshi2KByte = int(.8 * self.Maxi2KByte)
self.Share = default_Share
self.Sharei2 = default_Share
self.emailed = False
# Sanity check plus policy decision for MinRate:
# Minrate cant be greater than 25% of MaxRate or NodeCap.
- MinRate = int(rspec.get("net_min_rate", default_MinRate))
+ MinRate = int(rspec.get("net_min_rate", bwlimit.bwmin / 1000))
if MinRate > int(.25 * default_MaxRate):
MinRate = int(.25 * default_MaxRate)
if MinRate != self.MinRate:
self.MinRate = MinRate
logger.log("bwmon: Updating %s: Min Rate = %s" %(self.name, self.MinRate))
- MaxRate = int(rspec.get('net_max_rate', bwlimit.get_bwcap() / 1000))
+ MaxRate = int(rspec.get('net_max_rate', default_MaxRate))
if MaxRate != self.MaxRate:
self.MaxRate = MaxRate
logger.log("bwmon: Updating %s: Max Rate = %s" %(self.name, self.MaxRate))
- Mini2Rate = int(rspec.get('net_i2_min_rate', default_Mini2Rate))
+ Mini2Rate = int(rspec.get('net_i2_min_rate', bwlimit.bwmin / 1000))
if Mini2Rate != self.Mini2Rate:
self.Mini2Rate = Mini2Rate
logger.log("bwmon: Updating %s: Min i2 Rate = %s" %(self.name, self.Mini2Rate))
- Maxi2Rate = int(rspec.get('net_i2_max_rate', bwlimit.bwmax / 1000))
+ Maxi2Rate = int(rspec.get('net_i2_max_rate', default_Maxi2Rate))
if Maxi2Rate != self.Maxi2Rate:
self.Maxi2Rate = Maxi2Rate
logger.log("bwmon: Updating %s: Max i2 Rate = %s" %(self.name, self.Maxi2Rate))
Begin a new recording period. Remove caps by restoring limits
to their default values.
"""
-
# Query Node Manager for max rate overrides
self.updateSliceAttributes(rspec)
'date': time.asctime(time.gmtime()) + " GMT",
'period': format_period(period)}
- if new_maxrate != self.MaxRate:
+ if new_maxrate != (self.MaxRate * 1000):
# Format template parameters for low bandwidth message
params['class'] = "low bandwidth"
params['bytes'] = format_bytes(usedbytes - self.bytes)
message += template % params
logger.log("bwmon: ** %(slice)s %(class)s capped at %(new_maxrate)s/s " % params)
- if new_maxexemptrate != self.Maxi2Rate:
+ if new_maxexemptrate != (self.Maxi2Rate * 1000):
# Format template parameters for high bandwidth message
params['class'] = "high bandwidth"
params['bytes'] = format_bytes(usedi2bytes - self.i2bytes)
params['limit'] = format_bytes(self.Maxi2KByte * 1024)
- params['new_maxexemptrate'] = bwlimit.format_tc_rate(new_maxi2rate)
+ params['new_maxrate'] = bwlimit.format_tc_rate(new_maxexemptrate)
message += template % params
logger.log("bwmon: ** %(slice)s %(class)s capped at %(new_maxrate)s/s " % params)
# Notify slice
- if message and self.emailed == False:
+ if self.emailed == False:
subject = "pl_mom capped bandwidth of slice %(slice)s on %(hostname)s" % params
- if debug:
+ if DEBUG:
logger.log("bwmon: "+ subject)
logger.log("bwmon: "+ message + (footer % params))
else:
self.emailed = True
+ logger.log("bwmon: Emailing %s" % self.name)
slicemail(self.name, subject, message + (footer % params))
def update(self, runningmaxrate, runningmaxi2rate, usedbytes, usedi2bytes, runningshare, rspec):
"""
Update byte counts and check if byte thresholds have been
- exceeded. If exceeded, cap to remaining bytes in limit over remaining in period.
+ exceeded. If exceeded, cap to remaining bytes in limit over remaining time in period.
Recalculate every time module runs.
"""
-
+
+ # copy self.Min* and self.*share values for comparison later.
+ runningMinRate = self.MinRate
+ runningMini2Rate = self.Mini2Rate
+ runningshare = self.Share
+ runningsharei2 = self.Sharei2
+
# Query Node Manager for max rate overrides
self.updateSliceAttributes(rspec)
- # Check shares for Sirius loans.
- if runningshare != self.Share:
- logger.log("bwmon: Updating share to %s" % self.share)
- bwlimit.set(xid = self.xid,
- minrate = self.MinRate * 1000,
- maxrate = self.MaxRate * 1000,
- maxexemptrate = self.Maxi2Rate * 1000,
- minexemptrate = self.Mini2Rate * 1000,
- share = self.Share)
-
- # Prepare message parameters from the template
- #message = ""
- #params = {'slice': self.name, 'hostname': socket.gethostname(),
- # 'since': time.asctime(time.gmtime(self.time)) + " GMT",
- # 'until': time.asctime(time.gmtime(self.time + period)) + " GMT",
- # 'date': time.asctime(time.gmtime()) + " GMT",
- # 'period': format_period(period)}
-
# Check limits.
if usedbytes >= (self.bytes + (self.ThreshKByte * 1024)):
sum = self.bytes + (self.ThreshKByte * 1024)
maxbyte = self.MaxKByte * 1024
bytesused = usedbytes - self.bytes
timeused = int(time.time() - self.time)
- # Calcuate new rate.
+ # Calcuate new rate. in bit/s
new_maxrate = int(((maxbyte - bytesused) * 8)/(period - timeused))
# Never go under MinRate
if new_maxrate < (self.MinRate * 1000):
new_maxrate = self.MinRate * 1000
# State information. I'm capped.
- self.capped = True
+ self.capped += True
else:
# Sanity Check
new_maxrate = self.MaxRate * 1000
- self.capped = False
-
- ## Format template parameters for low bandwidth message
- #params['class'] = "low bandwidth"
- #params['bytes'] = format_bytes(usedbytes - self.bytes)
- #params['limit'] = format_bytes(self.MaxKByte * 1024)
- #params['thresh'] = format_bytes(self.ThreshKByte * 1024)
- #params['new_maxrate'] = bwlimit.format_tc_rate(new_maxrate)
-
- # Cap low bandwidth burst rate
- #if new_maxrate != runningmaxrate:
- # message += template % params
- # logger.log("bwmon: ** %(slice)s %(class)s capped at %(new_maxrate)s/s " % params)
-
+ self.capped += False
+
if usedi2bytes >= (self.i2bytes + (self.Threshi2KByte * 1024)):
maxi2byte = self.Maxi2KByte * 1024
i2bytesused = usedi2bytes - self.i2bytes
if new_maxi2rate < (self.Mini2Rate * 1000):
new_maxi2rate = self.Mini2Rate * 1000
# State information. I'm capped.
- self.capped = True
+ self.capped += True
else:
# Sanity
new_maxi2rate = self.Maxi2Rate * 1000
- self.capped = False
-
- # Format template parameters for high bandwidth message
- #params['class'] = "high bandwidth"
- #params['bytes'] = format_bytes(usedi2bytes - self.i2bytes)
- #params['limit'] = format_bytes(self.Maxi2KByte * 1024)
- #params['new_maxexemptrate'] = bwlimit.format_tc_rate(new_maxi2rate)
-
- # Cap high bandwidth burst rate
- #if new_maxi2rate != runningmaxi2rate:
- # message += template % params
- # logger.log("bwmon: %(slice)s %(class)s capped at %(new_maxexemptrate)s/s" % params)
-
- # Apply parameters
- if new_maxrate != runningmaxrate or new_maxi2rate != runningmaxi2rate:
- bwlimit.set(xid = self.xid, maxrate = new_maxrate, maxexemptrate = new_maxi2rate)
+ self.capped += False
+
+ # Check running values against newly calculated values so as not to run tc
+ # unnecessarily
+ if (runningmaxrate != new_maxrate) or \
+ (runningMinRate != self.MinRate) or \
+ (runningmaxi2rate != new_maxi2rate) or \
+ (runningMini2Rate != self.Mini2Rate) or \
+ (runningshare != self.Share):
+ # Apply parameters
+ bwlimit.set(xid = self.xid,
+ minrate = self.MinRate * 1000,
+ maxrate = new_maxrate,
+ minexemptrate = self.Mini2Rate * 1000,
+ maxexemptrate = new_maxi2rate,
+ share = self.Share)
# Notify slice
- if self.capped == True and self.emailed == False:
- self.notify(newmaxrate, newmaxexemptrate, usedbytes, usedi2bytes)
- # subject = "pl_mom capped bandwidth of slice %(slice)s on %(hostname)s" % params
- # if debug:
- # logger.log("bwmon: "+ subject)
- # logger.log("bwmon: "+ message + (footer % params))
- # else:
- # self.emailed = True
- # slicemail(self.name, subject, message + (footer % params))
+ if self.capped == True:
+ self.notify(new_maxrate, new_maxi2rate, usedbytes, usedi2bytes)
+
def gethtbs(root_xid, default_xid):
"""
period, \
default_MaxRate, \
default_Maxi2Rate, \
- default_MinRate, \
default_MaxKByte,\
- default_ThreshKByte,\
default_Maxi2KByte,\
- default_Threshi2KByte,\
- default_Share,\
- verbose
+ default_Share
# All slices
names = []
# Incase default isn't set yet.
if default_MaxRate == -1:
- default_MaxRate = 1000000
+ default_MaxRate = 10000000
try:
f = open(datafile, "r+")
kernelhtbs = gethtbs(root_xid, default_xid)
logger.log("bwmon: now %s running HTBs" % kernelhtbs.keys().__len__(), 2)
+ # Update all byte limites on all slices
for (xid, slice) in slices.iteritems():
# Monitor only the specified slices
if xid == root_xid or xid == default_xid: continue
kernelhtbs[xid]['usedbytes'], \
kernelhtbs[xid]['usedi2bytes'], \
live[xid]['_rspec'])
- else:
+ elif ENABLE:
logger.log("bwmon: Updating slice %s" % slice.name, 2)
# Update byte counts
slice.update(kernelhtbs[xid]['maxrate'], \
pickle.dump((version, slices, deaddb), f)
f.close()
+
+def getDefaults(nmdbcopy):
+ '''
+ Get defaults from default slice's slice attributes.
+ '''
+ status = True
+ # default slice
+ dfltslice = nmdbcopy.get(PLC_SLICE_PREFIX+"_default")
+ if dfltslice:
+ if dfltslice['rspec']['net_max_rate'] == -1:
+ allOff()
+ status = False
+ return status
+
+
+def allOff():
+ """
+ Turn off all slice HTBs
+ """
+ # Get/set special slice IDs
+ root_xid = bwlimit.get_xid("root")
+ default_xid = bwlimit.get_xid("default")
+ kernelhtbs = gethtbs(root_xid, default_xid)
+ if len(kernelhtbs):
+ logger.log("bwlimit: Disabling all running HTBs.")
+ for htb in kernelhtbs.keys(): bwlimit.off(htb)
+
+
lock = threading.Event()
def run():
- """When run as a thread, wait for event, lock db, deep copy it, release it, run bwmon.GetSlivers(), then go back to waiting."""
+ """
+ When run as a thread, wait for event, lock db, deep copy it, release it,
+ run bwmon.GetSlivers(), then go back to waiting.
+ """
logger.log("bwmon: Thread started", 2)
while True:
lock.wait()
database.db_lock.acquire()
nmdbcopy = copy.deepcopy(database.db)
database.db_lock.release()
- try: sync(nmdbcopy)
+ try:
+ if getDefaults(nmdbcopy) and len(bwlimit.tc("class show dev eth0")) > 0:
+ # class show to check if net:InitNodeLimit:bwlimit.init has run.
+ sync(nmdbcopy)
+ else: logger.log("bwmon: BW limits DISABLED.")
except: logger.log_exc()
lock.clear()
git://git.onelab.eu / nodemanager.git / blobdiff