spaces after comma

[nodemanager.git] / plugins / ipv6.py

diff --git a/plugins/ipv6.py b/plugins/ipv6.py
index a9df0e7..28e138f 100644 (file)
--- a/plugins/ipv6.py
+++ b/plugins/ipv6.py
@@ -3,7 +3,7 @@
 """
 Description: IPv6 Support and Management to Slices
 ipv6 nodemanager plugin
-Version: 0.7
+Version: 0.8
 Author: Guilherme Sperb Machado <gsm@machados.org>
 
 Requirements:
@@ -12,7 +12,7 @@ Requirements:
 * The prefix specified on 'sliversipv6prefix' tag must be at least 64
   It should vary between 1 and 64, since it is the minimum amount of bits to
   have native IPv6 auto-configuration.
-* The ipv6_address on 'sliversipv6prefix' tag can be any valid IPv6 address.
+* The ipv6_address in 'sliversipv6prefix' tag value can be any valid IPv6 address.
   E.g., 2002:1000:: or 2002:1000::1
 * It is the node manager/admin responsibility to properly set the IPv6 routing,
   since slivers should receive/send any kind of traffic.
@@ -24,11 +24,17 @@ import socket
 import re
 
 import tools
-import libvirt
 import uuid
-from sliver_libvirt import Sliver_Libvirt
 from xml.dom.minidom import parseString
 
+# TODO: is there anything better to do if the "libvirt", "sliver_libvirt",
+# and are not in place in the VS distro?
+try:
+    import libvirt
+    from sliver_libvirt import Sliver_Libvirt
+except:
+    logger.log("Could not import 'sliver_lxc' or 'libvirt'.")
+
 priority=4
 
 radvd_conf_file = '/etc/radvd.conf'
@@ -187,7 +193,7 @@ interface virbr0
 
 };
 """ % locals()
-    with open(radvd_conf_file,'w') as f:
+    with open(radvd_conf_file, 'w') as f:
         f.write(configRadvd)
     kill_radvd()
     start_radvd()
@@ -223,7 +229,7 @@ def GetSlivers(data, config, plc):
     interfaces = data['interfaces']
     logger.log(repr(interfaces))
     for interface in interfaces:
-        logger.log('ipv6: get interface: %r'%(interface))
+        #logger.log('ipv6: get interface: %r'%(interface))
         if 'interface_tag_ids' in interface:
             interface_tag_ids = "interface_tag_ids"
             interface_tag_id = "interface_tag_id"
@@ -234,17 +240,17 @@ def GetSlivers(data, config, plc):
                     ipv6addrprefix = setting['value'].split('/', 1)
                     ipv6addr = ipv6addrprefix[0]
                     valid_prefix = False
-                    logger.log("ipv6: len(ipv6addrprefix)=%s" % (len(ipv6addrprefix)) )
+                    #logger.log("ipv6: len(ipv6addrprefix)=%s" % (len(ipv6addrprefix)) )
                     if len(ipv6addrprefix)>1:
                         prefix = ipv6addrprefix[1]
-                        logger.log("ipv6: prefix=%s" % (prefix) )
+                        #logger.log("ipv6: prefix=%s" % (prefix) )
                         if int(prefix)>0 and int(prefix)<=64:
                             valid_prefix = True
                         else:
                             valid_prefix = False
                     else:
                         valid_prefix = False
-                    logger.log("ipv6: '%s'=%s" % (sliversipv6prefixtag,ipv6addr) )
+                    #logger.log("ipv6: '%s'=%s" % (sliversipv6prefixtag, ipv6addr) )
                     valid_ipv6 = tools.is_valid_ipv6(ipv6addr)
                     if not(valid_ipv6):
                         logger.log("ipv6: the 'sliversipv6prefix' tag presented a non-valid IPv6 address!")
@@ -271,7 +277,7 @@ def GetSlivers(data, config, plc):
                                     tools.reboot_slivers()
                             else:
                                 logger.log("ipv6: starting to redefine the virtual network...")
-                                #network_elem = buildLibvirtDefaultNetConfig(dom,ipv6addr,prefix)
+                                #network_elem = buildLibvirtDefaultNetConfig(dom, ipv6addr, prefix)
                                 network_elem = add_ipv6(dom, ipv6addr, prefix)
                                 set_up(networkLibvirt, connLibvirt, network_elem, ipv6addr, prefix)
                                 logger.log("ipv6: trying to reboot the slivers...")