+# -*- python-indent: 4 -*-
+
"""A few things that didn't seem to fit anywhere else."""
-import os, os.path
+import os
+import os.path
import pwd
import tempfile
import fcntl
import sys
import signal
-###################################################
-# Added by Guilherme Sperb Machado <gsm@machados.org>
-###################################################
-
-import re
-import socket
-import fileinput
-
-# TODO: is there anything better to do if the "libvirt", "sliver_libvirt",
-# and "sliver_lxc" are not in place?
-try:
- import libvirt
- from sliver_libvirt import Sliver_Libvirt
- import sliver_lxc
-except:
- logger.log("Could not import sliver_lxc or libvirt or sliver_libvirt -- which is required here.")
-###################################################
-
import logger
PID_FILE = '/var/run/nodemanager.pid'
####################
+
+
def get_default_if():
interface = get_if_from_hwaddr(get_hwaddr_from_plnode())
- if not interface: interface = "eth0"
+ if not interface:
+ interface = "eth0"
return interface
+
def get_hwaddr_from_plnode():
try:
for line in open("/usr/boot/plnode.txt", 'r').readlines():
pass
return None
+
def get_if_from_hwaddr(hwaddr):
import sioc
devs = sioc.gifconf()
for dev in devs:
dev_hwaddr = sioc.gifhwaddr(dev)
- if dev_hwaddr == hwaddr: return dev
+ if dev_hwaddr == hwaddr:
+ return dev
return None
####################
# daemonizing
+
+
def as_daemon_thread(run):
- """Call function <run> with no arguments in its own thread."""
+ """
+ Call function <run> with no arguments in its own thread.
+ """
thr = threading.Thread(target=run)
thr.setDaemon(True)
thr.start()
+
def close_nonstandard_fds():
- """Close all open file descriptors other than 0, 1, and 2."""
+ """
+ Close all open file descriptors other than 0, 1, and 2.
+ """
_SC_OPEN_MAX = 4
for fd in range(3, os.sysconf(_SC_OPEN_MAX)):
- try: os.close(fd)
- except OSError: pass # most likely an fd that isn't open
+ try:
+ os.close(fd)
+ except OSError:
+ pass # most likely an fd that isn't open
# after http://www.erlenstar.demon.co.uk/unix/faq_2.html
+
+
def daemon():
- """Daemonize the current process."""
- if os.fork() != 0: os._exit(0)
+ """
+ Daemonize the current process.
+ """
+ if os.fork() != 0:
+ os._exit(0)
os.setsid()
- if os.fork() != 0: os._exit(0)
+ if os.fork() != 0:
+ os._exit(0)
os.chdir('/')
- os.umask(0022)
+ os.umask(0o022)
devnull = os.open(os.devnull, os.O_RDWR)
os.dup2(devnull, 0)
# xxx fixme - this is just to make sure that nothing gets stupidly lost - should use devnull
- crashlog = os.open('/var/log/nodemanager.daemon', os.O_RDWR | os.O_APPEND | os.O_CREAT, 0644)
+ crashlog = os.open('/var/log/nodemanager.daemon',
+ os.O_RDWR | os.O_APPEND | os.O_CREAT, 0o644)
os.dup2(crashlog, 1)
os.dup2(crashlog, 2)
+
def fork_as(su, function, *args):
- """fork(), cd / to avoid keeping unused directories open, close all nonstandard file descriptors (to avoid capturing open sockets), fork() again (to avoid zombies) and call <function> with arguments <args> in the grandchild process. If <su> is not None, set our group and user ids appropriately in the child process."""
+ """
+ fork(), cd / to avoid keeping unused directories open, close all nonstandard
+ file descriptors (to avoid capturing open sockets), fork() again (to avoid
+ zombies) and call <function> with arguments <args> in the grandchild
+ process. If <su> is not None, set our group and user ids appropriately in
+ the child process.
+ """
child_pid = os.fork()
if child_pid == 0:
try:
os.setegid(pw_ent[3])
os.seteuid(pw_ent[2])
child_pid = os.fork()
- if child_pid == 0: function(*args)
+ if child_pid == 0:
+ function(*args)
except:
os.seteuid(os.getuid()) # undo su so we can write the log file
os.setegid(os.getgid())
logger.log_exc("tools: fork_as")
os._exit(0)
- else: os.waitpid(child_pid, 0)
+ else:
+ os.waitpid(child_pid, 0)
####################
# manage files
+
+
def pid_file():
- """We use a pid file to ensure that only one copy of NM is running at a given time.
-If successful, this function will write a pid file containing the pid of the current process.
-The return value is the pid of the other running process, or None otherwise."""
+ """
+ We use a pid file to ensure that only one copy of NM is running at a given
+ time. If successful, this function will write a pid file containing the pid
+ of the current process. The return value is the pid of the other running
+ process, or None otherwise.
+ """
other_pid = None
if os.access(PID_FILE, os.F_OK): # check for a pid file
handle = open(PID_FILE) # pid file exists, read it
other_pid = int(handle.read())
handle.close()
# check for a process with that pid by sending signal 0
- try: os.kill(other_pid, 0)
- except OSError, e:
- if e.errno == errno.ESRCH: other_pid = None # doesn't exist
- else: raise # who knows
+ try:
+ os.kill(other_pid, 0)
+ except OSError as e:
+ if e.errno == errno.ESRCH:
+ other_pid = None # doesn't exist
+ else:
+ raise # who knows
if other_pid == None:
# write a new pid file
write_file(PID_FILE, lambda f: f.write(str(os.getpid())))
return other_pid
+
def write_file(filename, do_write, **kw_args):
- """Write file <filename> atomically by opening a temporary file, using <do_write> to write that file, and then renaming the temporary file."""
+ """
+ Write file <filename> atomically by opening a temporary file,
+ using <do_write> to write that file, and then renaming the temporary file.
+ """
shutil.move(write_temp_file(do_write, **kw_args), filename)
-def write_temp_file(do_write, mode=None, uidgid=None):
+
+def write_temp_file(do_write, mode=None, uidgid=None, binary=False):
fd, temporary_filename = tempfile.mkstemp()
- if mode: os.chmod(temporary_filename, mode)
- if uidgid: os.chown(temporary_filename, *uidgid)
- f = os.fdopen(fd, 'w')
- try: do_write(f)
- finally: f.close()
+ if mode:
+ os.chmod(temporary_filename, mode)
+ if uidgid:
+ os.chown(temporary_filename, *uidgid)
+ open_mode = 'wb' if binary else 'w'
+ f = os.fdopen(fd, open_mode)
+ try:
+ do_write(f)
+ finally:
+ f.close()
return temporary_filename
-# replace a target file with a new contents - checks for changes
-# can handle chmod if requested
-# can also remove resulting file if contents are void, if requested
-# performs atomically:
-# writes in a tmp file, which is then renamed (from sliverauth originally)
-# returns True if a change occurred, or the file is deleted
-def replace_file_with_string (target, new_contents, chmod=None, remove_if_empty=False):
+
+def replace_file_with_string(target, new_contents,
+ chmod=None, remove_if_empty=False):
+ """
+ Replace a target file with a new contents checks for changes: does not do
+ anything if previous state was already right can handle chmod if requested
+ can also remove resulting file if contents are void, if requested performs
+ atomically: writes in a tmp file, which is then renamed (from sliverauth
+ originally) returns True if a change occurred, or the file is deleted
+ """
try:
- current=file(target).read()
+ with open(target) as feed:
+ current = feed.read()
except:
- current=""
- if current==new_contents:
+ current = ""
+ if current == new_contents:
# if turns out to be an empty string, and remove_if_empty is set,
# then make sure to trash the file if it exists
if remove_if_empty and not new_contents and os.path.isfile(target):
- logger.verbose("tools.replace_file_with_string: removing file %s"%target)
- try: os.unlink(target)
- finally: return True
+ logger.verbose(
+ "tools.replace_file_with_string: removing file {}".format(target))
+ try:
+ os.unlink(target)
+ finally:
+ return True
return False
# overwrite target file: create a temp in the same directory
- path=os.path.dirname(target) or '.'
- fd, name = tempfile.mkstemp('','repl',path)
- os.write(fd,new_contents)
+ path = os.path.dirname(target) or '.'
+ fd, name = tempfile.mkstemp('', 'repl', path)
+ os.write(fd, new_contents.encode())
os.close(fd)
if os.path.exists(target):
os.unlink(target)
- shutil.move(name,target)
- if chmod: os.chmod(target,chmod)
+ shutil.move(name, target)
+ if chmod:
+ os.chmod(target, chmod)
return True
-
####################
# utilities functions to get (cached) information from the node
+
# get node_id from /etc/planetlab/node_id and cache it
-_node_id=None
+_node_id = None
+
+
def node_id():
global _node_id
if _node_id is None:
try:
- _node_id=int(file("/etc/planetlab/node_id").read())
+ with open("/etc/planetlab/node_id") as f:
+ _node_id = int(f.read())
except:
- _node_id=""
+ _node_id = ""
return _node_id
-_root_context_arch=None
+
+_root_context_arch = None
+
+
def root_context_arch():
global _root_context_arch
if not _root_context_arch:
- sp=subprocess.Popen(["uname","-i"],stdout=subprocess.PIPE)
- (_root_context_arch,_)=sp.communicate()
- _root_context_arch=_root_context_arch.strip()
+ sp = subprocess.Popen(["uname", "-i"], stdout=subprocess.PIPE)
+ (_root_context_arch, _) = sp.communicate()
+ _root_context_arch = _root_context_arch.strip()
return _root_context_arch
####################
class NMLock:
def __init__(self, file):
- logger.log("tools: Lock %s initialized." % file, 2)
- self.fd = os.open(file, os.O_RDWR|os.O_CREAT, 0600)
+ logger.log("tools: Lock {} initialized.".format(file), 2)
+ self.fd = os.open(file, os.O_RDWR | os.O_CREAT, 0o600)
flags = fcntl.fcntl(self.fd, fcntl.F_GETFD)
flags |= fcntl.FD_CLOEXEC
fcntl.fcntl(self.fd, fcntl.F_SETFD, flags)
+
def __del__(self):
os.close(self.fd)
+
def acquire(self):
logger.log("tools: Lock acquired.", 2)
fcntl.lockf(self.fd, fcntl.LOCK_SH)
+
def release(self):
logger.log("tools: Lock released.", 2)
fcntl.lockf(self.fd, fcntl.LOCK_UN)
# Utilities for getting the IP address of a LXC/Openvswitch slice. Do this by
# running ifconfig inside of the slice's context.
+
def get_sliver_process(slice_name, process_cmdline):
- """ Utility function to find a process inside of an LXC sliver. Returns
- (cgroup_fn, pid). cgroup_fn is the filename of the cgroup file for
- the process, for example /proc/2592/cgroup. Pid is the process id of
- the process. If the process is not found then (None, None) is returned.
+ """
+ Utility function to find a process inside of an LXC sliver. Returns
+ (cgroup_fn, pid). cgroup_fn is the filename of the cgroup file for
+ the process, for example /proc/2592/cgroup. Pid is the process id of
+ the process. If the process is not found then (None, None) is returned.
"""
try:
- cmd = 'grep %s /proc/*/cgroup | grep freezer'%slice_name
+ cmd = 'grep {} /proc/*/cgroup | grep freezer'.format(slice_name)
output = os.popen(cmd).readlines()
except:
# the slice couldn't be found
- logger.log("get_sliver_process: couldn't find slice %s" % slice_name)
+ logger.log(
+ "get_sliver_process: couldn't find slice {}".format(slice_name))
return (None, None)
cgroup_fn = None
path = l.split(':')[0]
comp = l.rsplit(':')[-1]
slice_name_check = comp.rsplit('/')[-1]
+ # the lines below were added by Guilherme <gsm@machados.org>
+ # due to the LXC requirements
+ # What we have to consider here is that libervirt on Fedora 18
+ # uses the following line:
+ # /proc/1253/cgroup:6:freezer:/machine.slice/auto_sirius.libvirt-lxc
+ # While the libvirt on Fedora 20 and 21 uses the following line:
+ # /proc/1253/cgroup:6:freezer:/machine.slice/machine-lxc\x2del_sirius.scope
+ # Further documentation on:
+ # https://libvirt.org/cgroups.html#systemdScope
+ virt = get_node_virt()
+ if virt == 'lxc':
+ # This is for Fedora 20 or later
+ regexf20orlater = re.compile(r'machine-lxc\\x2d(.+).scope')
+ isf20orlater = regexf20orlater.search(slice_name_check)
+ if isf20orlater:
+ slice_name_check = isf20orlater.group(1)
+ else:
+ # This is for Fedora 18
+ slice_name_check = slice_name_check.rsplit('.')[0]
if (slice_name_check == slice_name):
slice_path = path
pid = slice_path.split('/')[2]
- cmdline = open('/proc/%s/cmdline'%pid).read().rstrip('\n\x00')
+ with open('/proc/{}/cmdline'.format(pid)) as cmdfile:
+ cmdline = cmdfile.read().rstrip('\n\x00')
if (cmdline == process_cmdline):
cgroup_fn = slice_path
break
break
if (not cgroup_fn) or (not pid):
- logger.log("get_sliver_process: process %s not running in slice %s" % (process_cmdline, slice_name))
+ logger.log("get_sliver_process: process {} not running in slice {}"
+ .format(process_cmdline, slice_name))
return (None, None)
return (cgroup_fn, pid)
###################################################
-# Author: Guilherme Sperb Machado <gsm@machados.org>
-###################################################
-# Basically this method is just a copy from "get_process()", just
-# adding one more split() to correctly parse the processes for LXC.
-# Only for LXC!
-# TODO: maybe merge both methods, and put the type as an argument, if
-# it is LXC or vserver
+# Added by Guilherme Sperb Machado <gsm@machados.org>
###################################################
-def get_sliver_process_lxc(slice_name, process_cmdline):
- """ Utility function to find a process inside of an LXC sliver. Returns
- (cgroup_fn, pid). cgroup_fn is the filename of the cgroup file for
- the process, for example /proc/2592/cgroup. Pid is the process id of
- the process. If the process is not found then (None, None) is returned.
- """
- try:
- cmd = 'grep %s /proc/*/cgroup | grep freezer'%slice_name
- output = os.popen(cmd).readlines()
- except:
- # the slice couldn't be found
- logger.log("get_sliver_process: couldn't find slice %s" % slice_name)
- return (None, None)
- cgroup_fn = None
- pid = None
- for e in output:
- try:
- l = e.rstrip()
- #logger.log("tools: l=%s" % (l) )
- path = l.split(':')[0]
- #logger.log("tools: path=%s" % (path) )
- comp = l.rsplit(':')[-1]
- #logger.log("tools: comp=%s" % (comp) )
- slice_name_check1 = comp.rsplit('/')[-1]
- #logger.log("tools: slice_name_check1=%s" % (slice_name_check1) )
- slice_name_check2 = slice_name_check1.rsplit('.')[0]
- #logger.log("tools: slice_name_check2=%s" % (slice_name_check2) )
-
- if (slice_name_check2 == slice_name):
- slice_path = path
- pid = slice_path.split('/')[2]
- #logger.log("tools: pid=%s" % (pid) )
- cmdline = open('/proc/%s/cmdline'%pid).read().rstrip('\n\x00')
- #logger.log("tools: cmdline=%s" % (cmdline) )
- #logger.log("tools: process_cmdline=%s" % (process_cmdline) )
- if (cmdline == process_cmdline):
- cgroup_fn = slice_path
- break
- except:
- #logger.log("tools: break!")
- break
- if (not cgroup_fn) or (not pid):
- logger.log("get_sliver_process: process %s not running in slice %s" % (process_cmdline, slice_name))
- return (None, None)
+try:
+ import re
+ import socket
+ import fileinput
+except:
+ logger.log("Could not import 're', 'socket', or 'fileinput' python packages.")
- return (cgroup_fn, pid)
+# TODO: is there anything better to do if the "libvirt", "sliver_libvirt",
+# and "sliver_lxc" are not in place?
+try:
+ import libvirt
+ from sliver_libvirt import Sliver_Libvirt
+ import sliver_lxc
+except:
+ logger.log("Could not import 'sliver_lxc' or 'libvirt' or 'sliver_libvirt'.")
+###################################################
def get_sliver_ifconfig(slice_name, device="eth0"):
- """ return the output of "ifconfig" run from inside the sliver.
-
- side effects: adds "/usr/sbin" to sys.path
"""
+ return the output of "ifconfig" run from inside the sliver.
- # See if setns is installed. If it's not then we're probably not running
- # LXC.
- if not os.path.exists("/usr/sbin/setns.so"):
- return None
-
- # setns is part of lxcsu and is installed to /usr/sbin
- if not "/usr/sbin" in sys.path:
- sys.path.append("/usr/sbin")
- import setns
-
- (cgroup_fn, pid) = get_sliver_process(slice_name, "/sbin/init")
- if (not cgroup_fn) or (not pid):
- return None
-
- path = '/proc/%s/ns/net'%pid
-
- result = None
- try:
- setns.chcontext(path)
-
- args = ["/sbin/ifconfig", device]
- sub = subprocess.Popen(args, stderr = subprocess.PIPE, stdout = subprocess.PIPE)
- sub.wait()
-
- if (sub.returncode != 0):
- logger.log("get_slice_ifconfig: error in ifconfig: %s" % sub.stderr.read())
-
- result = sub.stdout.read()
- finally:
- setns.chcontext("/proc/1/ns/net")
-
- return result
-
-###################################################
-# Author: Guilherme Sperb Machado <gsm@machados.org>
-###################################################
-# Basically this method is just a copy from "get_sliver_ifconfig()", but,
-# instead, calls the "get_sliver_process_lxc()" method.
-# Only for LXC!
-# TODO: maybe merge both methods, and put the type as an argument, if
-# it is LXC or vserver
-###################################################
-def get_sliver_ifconfig_lxc(slice_name, device="eth0"):
- """ return the output of "ifconfig" run from inside the sliver.
-
- side effects: adds "/usr/sbin" to sys.path
+ side effects: adds "/usr/sbin" to sys.path
"""
# See if setns is installed. If it's not then we're probably not running
sys.path.append("/usr/sbin")
import setns
- (cgroup_fn, pid) = get_sliver_process_lxc(slice_name, "/sbin/init")
+ (cgroup_fn, pid) = get_sliver_process(slice_name, "/sbin/init")
if (not cgroup_fn) or (not pid):
return None
- path = '/proc/%s/ns/net'%pid
+ path = '/proc/{}/ns/net'.format(pid)
result = None
try:
setns.chcontext(path)
args = ["/sbin/ifconfig", device]
- sub = subprocess.Popen(args, stderr = subprocess.PIPE, stdout = subprocess.PIPE)
+ sub = subprocess.Popen(
+ args, stderr=subprocess.PIPE, stdout=subprocess.PIPE)
sub.wait()
if (sub.returncode != 0):
- logger.log("get_slice_ifconfig: error in ifconfig: %s" % sub.stderr.read())
+ logger.log("get_slice_ifconfig: error in ifconfig: {}".format(
+ sub.stderr.read()))
result = sub.stdout.read()
finally:
if "inet addr:" in line:
# example: ' inet addr:192.168.122.189 Bcast:192.168.122.255 Mask:255.255.255.0'
parts = line.strip().split()
- if len(parts)>=2 and parts[1].startswith("addr:"):
+ if len(parts) >= 2 and parts[1].startswith("addr:"):
return parts[1].split(":")[1]
return None
# Get the slice ipv6 address
# Only for LXC!
###################################################
+
+
def get_sliver_ipv6(slice_name):
- ifconfig = get_sliver_ifconfig_lxc(slice_name)
+ ifconfig = get_sliver_ifconfig(slice_name)
if not ifconfig:
- return None,None
-
+ return None, None
+
# example: 'inet6 2001:67c:16dc:1302:5054:ff:fea7:7882 prefixlen 64 scopeid 0x0<global>'
- prog = re.compile(r'inet6\s+(.*)\s+prefixlen\s+(\d+)\s+scopeid\s+(.+)<global>')
+ prog = re.compile(
+ r'inet6\s+(.*)\s+prefixlen\s+(\d+)\s+scopeid\s+(.+)<global>')
for line in ifconfig.split("\n"):
- search = prog.search(line)
- if search:
- ipv6addr = search.group(1)
- prefixlen = search.group(2)
- return (ipv6addr,prefixlen)
- return None,None
-
-###################################################
+ search = prog.search(line)
+ if search:
+ ipv6addr = search.group(1)
+ prefixlen = search.group(2)
+ return (ipv6addr, prefixlen)
+ return None, None
+
+###################################################
# Author: Guilherme Sperb Machado <gsm@machados.org>
###################################################
# Check if the address is a AF_INET6 family address
###################################################
-def isValidIPv6(ipv6addr):
- try:
- socket.inet_pton(socket.AF_INET6, ipv6addr)
- except socket.error:
- return False
- return True
-### this returns the kind of virtualization on the node
+
+def is_valid_ipv6(ipv6addr):
+ try:
+ socket.inet_pton(socket.AF_INET6, ipv6addr)
+ except socket.error:
+ return False
+ return True
+
+
+# this returns the kind of virtualization on the node
# either 'vs' or 'lxc'
# also caches it in /etc/planetlab/virt for next calls
# could be promoted to core nm if need be
-virt_stamp="/etc/planetlab/virt"
-def get_node_virt ():
+virt_stamp = "/etc/planetlab/virt"
+
+
+def get_node_virt():
try:
- return file(virt_stamp).read().strip()
+ with open(virt_stamp) as f:
+ return f.read().strip()
except:
pass
logger.log("Computing virt..")
- try:
- if subprocess.call ([ 'vserver', '--help' ]) ==0: virt='vs'
- else: virt='lxc'
+ try:
+ virt = 'vs' if subprocess.call(['vserver', '--help']) == 0 else 'lxc'
except:
- virt='lxc'
- with file(virt_stamp,"w") as f:
+ virt = 'lxc'
+ with open(virt_stamp, "w") as f:
f.write(virt)
return virt
-### this return True or False to indicate that systemctl is present on that box
+
+# this return True or False to indicate that systemctl is present on that box
# cache result in memory as _has_systemctl
-_has_systemctl=None
-def has_systemctl ():
+_has_systemctl = None
+
+
+def has_systemctl():
global _has_systemctl
if _has_systemctl is None:
- _has_systemctl = (subprocess.call([ 'systemctl', '--help' ]) == 0)
+ _has_systemctl = (subprocess.call(['systemctl', '--help']) == 0)
return _has_systemctl
###################################################
# This method was developed to support the ipv6 plugin
# Only for LXC!
###################################################
-def reboot_sliver(name):
- type = 'sliver.LXC'
- # connecting to the libvirtd
- connLibvirt = Sliver_Libvirt.getConnection(type)
- domains = connLibvirt.listAllDomains()
- for domain in domains:
- #ret = dir(domain)
- #for method in ret:
- # logger.log("ipv6: " + repr(method))
- #logger.log("tools: " + str(domain.name()) )
- try:
- domain.destroy()
- logger.log("tools: %s destroyed" % (domain.name()) )
- domain.create()
- logger.log("tools: %s created" % (domain.name()) )
- except:
- logger.log("tools: %s could not be rebooted" % (domain.name()) )
+
+
+def reboot_slivers():
+ type = 'sliver.LXC'
+ # connecting to the libvirtd
+ connLibvirt = Sliver_Libvirt.getConnection(type)
+ domains = connLibvirt.listAllDomains()
+ for domain in domains:
+ try:
+ # set the flag VIR_DOMAIN_REBOOT_INITCTL, which uses "initctl"
+ result = domain.reboot(0x04)
+ if result == 0:
+ logger.log("tools: REBOOT {}".format(domain.name()))
+ else:
+ raise Exception()
+ except Exception as e:
+ logger.log("tools: FAILED to reboot {} ({})".format(
+ domain.name(), e))
+ logger.log(
+ "tools: Trying to DESTROY/CREATE {} instead...".format(domain.name()))
+ try:
+ result = domain.destroy()
+ if result == 0:
+ logger.log("tools: DESTROYED {}".format(domain.name()))
+ else:
+ logger.log(
+ "tools: FAILED in the DESTROY call of {}".format(domain.name()))
+ result = domain.create()
+ if result == 0:
+ logger.log("tools: CREATED {}".format(domain.name()))
+ else:
+ logger.log(
+ "tools: FAILED in the CREATE call of {}".format(domain.name()))
+ except Exception as e:
+ logger.log(
+ "tools: FAILED to DESTROY/CREATE {} ({})".format(domain.name(), e))
###################################################
# Author: Guilherme Sperb Machado <gsm@machados.org>
###################################################
# Get the /etc/hosts file path
###################################################
+
+
def get_hosts_file_path(slicename):
containerDir = os.path.join(sliver_lxc.Sliver_LXC.CON_BASE_DIR, slicename)
- logger.log("tools: %s" % (containerDir) )
return os.path.join(containerDir, 'etc', 'hosts')
###################################################
# Author: Guilherme Sperb Machado <gsm@machados.org>
###################################################
-# Search if there is a specific ipv6 address in the /etc/hosts file of a given slice
+# Search if there is a specific ipv6 address in the
+# /etc/hosts file of a given slice
+# If the parameter 'ipv6addr' is None, then search
+# for any ipv6 address
###################################################
+
+
def search_ipv6addr_hosts(slicename, ipv6addr):
hostsFilePath = get_hosts_file_path(slicename)
- found=False
+ found = False
try:
- for line in fileinput.input(r'%s' % (hostsFilePath)):
- if re.search(r'%s' % (ipv6addr), line):
- found=True
- fileinput.close()
- return found
+ for line in fileinput.input(r'{}'.format(hostsFilePath)):
+ if ipv6addr is not None:
+ if re.search(r'{}'.format(ipv6addr), line):
+ found = True
+ else:
+ search = re.search(r'^(.*)\s+.*$', line)
+ if search:
+ ipv6candidate = search.group(1)
+ ipv6candidatestrip = ipv6candidate.strip()
+ valid = is_valid_ipv6(ipv6candidatestrip)
+ if valid:
+ found = True
+ fileinput.close()
+ return found
except:
- logger.log("tools: error when finding ipv6 address %s in the /etc/hosts file of slice=%s" % (ipv6addr, slicename) )
+ logger.log("tools: FAILED to search {} in /etc/hosts file of slice={}"
+ .format(ipv6addr, slicename))
###################################################
# Author: Guilherme Sperb Machado <gsm@machados.org>
###################################################
-# Removes all ipv6 addresses from the /etc/hosts file of a given slice
+# Removes all ipv6 addresses from the /etc/hosts
+# file of a given slice
###################################################
+
+
def remove_all_ipv6addr_hosts(slicename, node):
hostsFilePath = get_hosts_file_path(slicename)
try:
- for line in fileinput.input(r'%s' % (hostsFilePath), inplace=True):
- logger.log("tools: line=%s" % (line) )
- search = re.search(r'^(.*)\s+(%s|%s)$' % (node,'localhost'), line)
- if search:
- ipv6candidate = search.group(1)
- ipv6candidatestrip = ipv6candidate.strip()
- logger.log("tools: group1=%s" % (ipv6candidatestrip) )
- valid = isValidIPv6(ipv6candidatestrip)
- if not valid:
- logger.log("tools: address=%s not valid" % (ipv6candidatestrip) )
- print line,
- fileinput.close()
+ for line in fileinput.input(r'{}'.format(hostsFilePath), inplace=True):
+ search = re.search(
+ r'^(.*)\s+({}|{})$'.format(node, 'localhost'), line)
+ if search:
+ ipv6candidate = search.group(1)
+ ipv6candidatestrip = ipv6candidate.strip()
+ valid = is_valid_ipv6(ipv6candidatestrip)
+ if not valid:
+ print(line, end=' ')
+ fileinput.close()
+ logger.log("tools: REMOVED IPv6 address from /etc/hosts file of slice={}"
+ .format(slicename))
except:
- logger.log("tools: could not delete the ipv6 address from the hosts file of slice=%s" % (slicename) )
+ logger.log("tools: FAILED to remove the IPv6 address from /etc/hosts file of slice={}"
+ .format(slicename))
###################################################
# Author: Guilherme Sperb Machado <gsm@machados.org>
###################################################
# Adds an ipv6 address to the /etc/hosts file within a slice
###################################################
+
+
def add_ipv6addr_hosts_line(slicename, node, ipv6addr):
hostsFilePath = get_hosts_file_path(slicename)
- logger.log("tools: %s" % (hostsFilePath) )
+ logger.log("tools: {}".format(hostsFilePath))
# debugging purposes:
#string = "127.0.0.1\tlocalhost\n192.168.100.179\tmyplc-node1-vm.mgmt.local\n"
#string = "127.0.0.1\tlocalhost\n"
try:
- with open(hostsFilePath, "a") as file:
- # debugging purposes only:
- #file.write(string)
- file.write(ipv6addr + " " + node + "\n")
- file.close()
+ with open(hostsFilePath, "a") as file:
+ file.write(ipv6addr + " " + node + "\n")
+ file.close()
+ logger.log("tools: ADDED IPv6 address to /etc/hosts file of slice={}"
+ .format(slicename))
except:
- logger.log("tools: could not add the IPv6 address to the hosts file of slice=%s" % (slicename) )
-
+ logger.log("tools: FAILED to add the IPv6 address to /etc/hosts file of slice={}"
+ .format(slicename))
# how to run a command in a slice
# bottom line is, what actually needs to be called is
# vs: vserver exec slicename command and its arguments
# lxc: lxcsu slicename "command and its arguments"
-# which, OK, is no big deal as long as the command is simple enough,
+# which, OK, is no big deal as long as the command is simple enough,
# but do not stretch it with arguments that have spaces or need quoting as that will become a nightmare
-def command_in_slice (slicename, argv):
- virt=get_node_virt()
- if virt=='vs':
- return [ 'vserver', slicename, 'exec', ] + argv
- elif virt=='lxc':
+def command_in_slice(slicename, argv):
+ virt = get_node_virt()
+ if virt == 'vs':
+ return ['vserver', slicename, 'exec', ] + argv
+ elif virt == 'lxc':
# wrap up argv in a single string for -c
- return [ 'lxcsu', slicename, ] + [ " ".join(argv) ]
+ return ['lxcsu', slicename, ] + [" ".join(argv)]
logger.log("command_in_slice: WARNING: could not find a valid virt")
return argv
####################
-def init_signals ():
- def handler (signum, frame):
- logger.log("Received signal %d - exiting"%signum)
+
+
+def init_signals():
+ def handler(signum, frame):
+ logger.log("Received signal {} - exiting".format(signum))
os._exit(1)
- signal.signal(signal.SIGHUP,handler)
- signal.signal(signal.SIGQUIT,handler)
- signal.signal(signal.SIGINT,handler)
- signal.signal(signal.SIGTERM,handler)
+ signal.signal(signal.SIGHUP, handler)
+ signal.signal(signal.SIGQUIT, handler)
+ signal.signal(signal.SIGINT, handler)
+ signal.signal(signal.SIGTERM, handler)
git://git.onelab.eu / nodemanager.git / blobdiff