To build this driver for your kernel, please check: For kernel 2.6 --------------- Check the Makefile and run 'make'. 'make install' will copy the nozomi.ko module to the /lib/modules/KERNEL_VERSION/kernel/drivers/pci/hotplug directory and runs 'insmod' For kernel 2.4 ---------- make HW=PC_24 Device Nodes ------------- If this is the first time, you will need to run the following commands: mknod /dev/noz0 c 241 0; mknod /dev/noz1 c 241 1; mknod /dev/noz2 c 241 2; mknod /dev/noz3 c 241 3 If you have troubles: --------------------- 1) Have proper kernel headers/source as your running kernel. 2) Make sure this variable in Makefile is correct KERNELDIR = -I/path/to/kernel