/* * Copyright (c) 2009, 2010, 2011 Nicira Networks. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include #include "packets.h" #include #include #include #include #include "byte-order.h" #include "dynamic-string.h" #include "ofpbuf.h" const struct in6_addr in6addr_exact = IN6ADDR_EXACT_INIT; /* Parses 's' as a 16-digit hexadecimal number representing a datapath ID. On * success stores the dpid into '*dpidp' and returns true, on failure stores 0 * into '*dpidp' and returns false. * * Rejects an all-zeros dpid as invalid. */ bool dpid_from_string(const char *s, uint64_t *dpidp) { *dpidp = (strlen(s) == 16 && strspn(s, "0123456789abcdefABCDEF") == 16 ? strtoull(s, NULL, 16) : 0); return *dpidp != 0; } bool eth_addr_from_string(const char *s, uint8_t ea[ETH_ADDR_LEN]) { if (sscanf(s, ETH_ADDR_SCAN_FMT, ETH_ADDR_SCAN_ARGS(ea)) == ETH_ADDR_SCAN_COUNT) { return true; } else { memset(ea, 0, ETH_ADDR_LEN); return false; } } /* Fills 'b' with an 802.2 SNAP packet with Ethernet source address 'eth_src', * the Nicira OUI as SNAP organization and 'snap_type' as SNAP type. The text * string in 'tag' is enclosed as the packet payload. * * This function is used by Open vSwitch to compose packets in cases where * context is important but content doesn't (or shouldn't) matter. For this * purpose, 'snap_type' should be a random number and 'tag' should be an * English phrase that explains the purpose of the packet. (The English phrase * gives hapless admins running Wireshark the opportunity to figure out what's * going on.) */ void compose_benign_packet(struct ofpbuf *b, const char *tag, uint16_t snap_type, const uint8_t eth_src[ETH_ADDR_LEN]) { size_t tag_size = strlen(tag) + 1; char *payload; payload = snap_compose(b, eth_addr_broadcast, eth_src, 0x002320, snap_type, tag_size + ETH_ADDR_LEN); memcpy(payload, tag, tag_size); memcpy(payload + tag_size, eth_src, ETH_ADDR_LEN); } /* Modify the TCI field of 'packet', whose data must begin with an Ethernet * header. If a VLAN tag is present, its TCI field is replaced by 'tci'. If a * VLAN tag is not present, one is added with the TCI field set to 'tci'. * * Also sets 'packet->l2' to point to the new Ethernet header. */ void eth_set_vlan_tci(struct ofpbuf *packet, ovs_be16 tci) { struct eth_header *eh = packet->data; struct vlan_eth_header *veh; if (packet->size >= sizeof(struct vlan_eth_header) && eh->eth_type == htons(ETH_TYPE_VLAN)) { veh = packet->data; veh->veth_tci = tci; } else { /* Insert new 802.1Q header. */ struct vlan_eth_header tmp; memcpy(tmp.veth_dst, eh->eth_dst, ETH_ADDR_LEN); memcpy(tmp.veth_src, eh->eth_src, ETH_ADDR_LEN); tmp.veth_type = htons(ETH_TYPE_VLAN); tmp.veth_tci = tci; tmp.veth_next_type = eh->eth_type; veh = ofpbuf_push_uninit(packet, VLAN_HEADER_LEN); memcpy(veh, &tmp, sizeof tmp); } packet->l2 = packet->data; } /* Stores the string representation of the IPv6 address 'addr' into the * character array 'addr_str', which must be at least INET6_ADDRSTRLEN * bytes long. */ void format_ipv6_addr(char *addr_str, const struct in6_addr *addr) { inet_ntop(AF_INET6, addr, addr_str, INET6_ADDRSTRLEN); } void print_ipv6_addr(struct ds *string, const struct in6_addr *addr) { char addr_str[INET6_ADDRSTRLEN]; format_ipv6_addr(addr_str, addr); ds_put_format(string, "%s", addr_str); } struct in6_addr ipv6_addr_bitand(const struct in6_addr *a, const struct in6_addr *b) { int i; struct in6_addr dst; #ifdef s6_addr32 for (i=0; i<4; i++) { dst.s6_addr32[i] = a->s6_addr32[i] & b->s6_addr32[i]; } #else for (i=0; i<16; i++) { dst.s6_addr[i] = a->s6_addr[i] & b->s6_addr[i]; } #endif return dst; } /* Returns an in6_addr consisting of 'mask' high-order 1-bits and 128-N * low-order 0-bits. */ struct in6_addr ipv6_create_mask(int mask) { struct in6_addr netmask; uint8_t *netmaskp = &netmask.s6_addr[0]; memset(&netmask, 0, sizeof netmask); while (mask > 8) { *netmaskp = 0xff; netmaskp++; mask -= 8; } if (mask) { *netmaskp = 0xff << (8 - mask); } return netmask; } /* Given the IPv6 netmask 'netmask', returns the number of bits of the * IPv6 address that it wildcards. 'netmask' must be a CIDR netmask (see * ipv6_is_cidr()). */ int ipv6_count_cidr_bits(const struct in6_addr *netmask) { int i; int count = 0; const uint8_t *netmaskp = &netmask->s6_addr[0]; assert(ipv6_is_cidr(netmask)); for (i=0; i<16; i++) { if (netmaskp[i] == 0xff) { count += 8; } else { uint8_t nm; for(nm = netmaskp[i]; nm; nm <<= 1) { count++; } break; } } return count; } /* Returns true if 'netmask' is a CIDR netmask, that is, if it consists of N * high-order 1-bits and 128-N low-order 0-bits. */ bool ipv6_is_cidr(const struct in6_addr *netmask) { const uint8_t *netmaskp = &netmask->s6_addr[0]; int i; for (i=0; i<16; i++) { if (netmaskp[i] != 0xff) { uint8_t x = ~netmaskp[i]; if (x & (x + 1)) { return false; } while (++i < 16) { if (netmaskp[i]) { return false; } } } } return true; } /* Populates 'b' with an Ethernet II packet headed with the given 'eth_dst', * 'eth_src' and 'eth_type' parameters. A payload of 'size' bytes is allocated * in 'b' and returned. This payload may be populated with appropriate * information by the caller. * * The returned packet has enough headroom to insert an 802.1Q VLAN header if * desired. */ void * eth_compose(struct ofpbuf *b, const uint8_t eth_dst[ETH_ADDR_LEN], const uint8_t eth_src[ETH_ADDR_LEN], uint16_t eth_type, size_t size) { void *data; struct eth_header *eth; ofpbuf_clear(b); ofpbuf_prealloc_tailroom(b, ETH_HEADER_LEN + VLAN_HEADER_LEN + size); ofpbuf_reserve(b, VLAN_HEADER_LEN); eth = ofpbuf_put_uninit(b, ETH_HEADER_LEN); data = ofpbuf_put_uninit(b, size); memcpy(eth->eth_dst, eth_dst, ETH_ADDR_LEN); memcpy(eth->eth_src, eth_src, ETH_ADDR_LEN); eth->eth_type = htons(eth_type); return data; } /* Populates 'b' with an Ethernet LLC+SNAP packet headed with the given * 'eth_dst', 'eth_src', 'snap_org', and 'snap_type'. A payload of 'size' * bytes is allocated in 'b' and returned. This payload may be populated with * appropriate information by the caller. * * The returned packet has enough headroom to insert an 802.1Q VLAN header if * desired. */ void * snap_compose(struct ofpbuf *b, const uint8_t eth_dst[ETH_ADDR_LEN], const uint8_t eth_src[ETH_ADDR_LEN], unsigned int oui, uint16_t snap_type, size_t size) { struct eth_header *eth; struct llc_snap_header *llc_snap; void *payload; /* Compose basic packet structure. (We need the payload size to stick into * the 802.2 header.) */ ofpbuf_clear(b); ofpbuf_prealloc_tailroom(b, ETH_HEADER_LEN + VLAN_HEADER_LEN + LLC_SNAP_HEADER_LEN + size); ofpbuf_reserve(b, VLAN_HEADER_LEN); eth = ofpbuf_put_zeros(b, ETH_HEADER_LEN); llc_snap = ofpbuf_put_zeros(b, LLC_SNAP_HEADER_LEN); payload = ofpbuf_put_uninit(b, size); /* Compose 802.2 header. */ memcpy(eth->eth_dst, eth_dst, ETH_ADDR_LEN); memcpy(eth->eth_src, eth_src, ETH_ADDR_LEN); eth->eth_type = htons(b->size - ETH_HEADER_LEN); /* Compose LLC, SNAP headers. */ llc_snap->llc.llc_dsap = LLC_DSAP_SNAP; llc_snap->llc.llc_ssap = LLC_SSAP_SNAP; llc_snap->llc.llc_cntl = LLC_CNTL_SNAP; llc_snap->snap.snap_org[0] = oui >> 16; llc_snap->snap.snap_org[1] = oui >> 8; llc_snap->snap.snap_org[2] = oui; llc_snap->snap.snap_type = htons(snap_type); return payload; }