.\"  Creator: Graphviz version 2.20.2 (Sun Oct 12 22:28:10 UTC 2008)
.\"  For: (blp) Ben Pfaff,,,
.\"  Title: Open_vSwitch
.\"  save point size and font
.nr .S \n(.s
.nr DF \n(.f
.PS 6.50000 3.59722
# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
.nr SF 6500
scalethickness = 6500
# don't change anything below this line in this drawing
# non-fatal run-time pic version determination, version 2
boxrad=2.0 # will be reset to 0.0 by gpic only
scale=1.0 # required for comparisons
# boxrad is now 0.0 in gpic, else it remains 2.0
# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
# DWB 2 doesn't use fill and doesn't define fillval
# reset works in gpic and 10th edition, but isn't defined in DWB 2
# DWB 2 compatibility definitions
if boxrad > 1.0 && dashwid < 0.075 then X
	fillval = 1;
	define fill Y Y;
	define solid Y Y;
	define reset Y scale=1.0 Y;
X
reset # set to known state
# GNU pic vs. 10th Edition d\(e'tente
if fillval > 0.4 then X
	define setfillval Y fillval = 1 - Y;
	define bold Y thickness 2 Y;
	# if you use gpic and it barfs on encountering "solid",
	#	install a more recent version of gpic or switch to DWB or 10th Edition pic;
	#	sorry, the groff folks changed gpic; send any complaint to them;
X else Z
	define setfillval Y fillval = Y;
	define bold Y Y;
	define filled Y fill Y;
Z
# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
arrowhead = 7 # not used by graphviz
# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
boxrad = 0 # no rounded corners in graphviz
# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
linethick = 1; oldlinethick = linethick
# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
maxpsht = 3.597222
maxpswid = 6.500000
Dot: [
define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
setfillval 0.000000
setfillval 0.827451
.ft R 
.ps 8*\n(SFu/6500u
setfillval 1.000000
setfillval 1.000000
setfillval 1.000000
{
define attrs1 % %
#	Bridge
setfillval 0.000000
box attrs1 wid 0.53352 ht 0.32011 at (2.19631,2.56088);
{
define attrs2 % %
setfillval 0.000000
"Bridge" at (2.19631,2.55791);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	sFlow
setfillval 0.000000
box attrs1 wid 0.49795 ht 0.32011 at (0.24897,1.76060);
{
define attrs2 % %
setfillval 0.000000
"sFlow" at (0.24897,1.75764);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Bridge -> sFlow
setfillval 0.000000
setfillval 0.000000
P0: (1.92955,2.52531)
P1: (1.84522,2.51062)
P2: (1.75320,2.49315)
P3: (1.65489,2.47281)
P4: (1.55168,2.44948)
P5: (1.44494,2.42305)
P6: (1.33607,2.39342)
P7: (1.22645,2.36049)
P8: (1.11747,2.32414)
P9: (1.01051,2.28427)
P10: (0.90698,2.24077)
P11: (0.86432,2.21866)
P12: (0.82183,2.19517)
P13: (0.77965,2.17050)
P14: (0.73796,2.14488)
P15: (0.69690,2.11850)
P16: (0.65665,2.09160)
P17: (0.61736,2.06437)
P18: (0.57918,2.03703)
P19: (0.54229,2.00981)
P20: (0.50684,1.98290)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (0.52462,1.95622)
P1: (0.43570,1.92066)
P2: (0.48016,2.00068)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"sflow" at (1.12483,2.15777);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Mirror
setfillval 0.000000
box attrs1 wid 0.51573 ht 0.32011 at (1.73393,1.76060);
{
define attrs2 % %
setfillval 0.000000
"Mirror" at (1.73393,1.75764);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Bridge -> Mirror
setfillval 0.000000
setfillval 0.000000
P0: (2.09850,2.40082)
P1: (2.08807,2.38482)
P2: (2.07808,2.36881)
P3: (2.06840,2.35280)
P4: (2.05894,2.33680)
P5: (2.04959,2.32079)
P6: (2.04024,2.30479)
P7: (2.03077,2.28878)
P8: (2.02110,2.27278)
P9: (2.01111,2.25677)
P10: (2.00068,2.24077)
P11: (1.98735,2.21676)
P12: (1.97401,2.19275)
P13: (1.96067,2.16874)
P14: (1.94733,2.14473)
P15: (1.93399,2.12073)
P16: (1.92066,2.09672)
P17: (1.90732,2.07271)
P18: (1.89398,2.04870)
P19: (1.88064,2.02469)
P20: (1.86731,2.00068)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (1.89398,1.98290)
P1: (1.82285,1.92066)
P2: (1.84063,2.00958)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"mirrors" at (2.24966,2.15777);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Port
setfillval 0.000000
box attrs1 wid 0.48016 ht 0.32011 at (3.31669,1.76060);
{
define attrs2 % %
setfillval 0.000000
"Port" at (3.31224,1.75764);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Bridge -> Port
setfillval 0.000000
setfillval 0.000000
P0: (2.37415,2.40082)
P1: (2.40743,2.37073)
P2: (2.44300,2.33936)
P3: (2.48050,2.30703)
P4: (2.51955,2.27406)
P5: (2.55976,2.24077)
P6: (2.60078,2.20747)
P7: (2.64223,2.17450)
P8: (2.68373,2.14217)
P9: (2.72490,2.11080)
P10: (2.76539,2.08071)
P11: (2.78699,2.06471)
P12: (2.80907,2.04877)
P13: (2.83157,2.03294)
P14: (2.85445,2.01726)
P15: (2.87765,2.00180)
P16: (2.90112,1.98660)
P17: (2.92480,1.97172)
P18: (2.94863,1.95722)
P19: (2.97258,1.94314)
P20: (2.99658,1.92955)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (3.01436,1.95622)
P1: (3.07661,1.88509)
P2: (2.98769,1.90287)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"ports" at (2.92100,2.15777);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Controller
setfillval 0.000000
box attrs1 wid 0.74692 ht 0.32011 at (4.09029,1.76060);
{
define attrs2 % %
setfillval 0.000000
"Controller" at (4.08584,1.75764);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Bridge -> Controller
setfillval 0.000000
setfillval 0.000000
P0: (2.46306,2.48085)
P1: (2.51818,2.46164)
P2: (2.57638,2.44137)
P3: (2.63704,2.42003)
P4: (2.69952,2.39762)
P5: (2.76317,2.37415)
P6: (2.82735,2.34960)
P7: (2.89142,2.32399)
P8: (2.95475,2.29732)
P9: (3.01669,2.26958)
P10: (3.07661,2.24077)
P11: (3.11337,2.22284)
P12: (3.14447,2.20619)
P13: (3.17120,2.19051)
P14: (3.19483,2.17546)
P15: (3.21666,2.16074)
P16: (3.23794,2.14601)
P17: (3.25998,2.13097)
P18: (3.28404,2.11528)
P19: (3.31141,2.09864)
P20: (3.34337,2.08071)
P21: (3.37271,2.06713)
P22: (3.40205,2.05318)
P23: (3.43140,2.03902)
P24: (3.46074,2.02480)
P25: (3.49008,2.01069)
P26: (3.51943,1.99684)
P27: (3.54877,1.98342)
P28: (3.57811,1.97059)
P29: (3.60746,1.95851)
P30: (3.63680,1.94733)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
move to P20; line attrs1 to P21 then to P22
move to P22; line attrs1 to P23 then to P24
move to P24; line attrs1 to P25 then to P26
move to P26; line attrs1 to P27 then to P28
move to P28; line attrs1 to P29 then to P30
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (3.64569,1.97401)
P1: (3.71683,1.91176)
P2: (3.61902,1.92066)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"controller" at (3.63680,2.15777);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	NetFlow
setfillval 0.000000
box attrs1 wid 0.65800 ht 0.32011 at (0.98700,1.76060);
{
define attrs2 % %
setfillval 0.000000
"NetFlow" at (0.98700,1.75764);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Bridge -> NetFlow
setfillval 0.000000
setfillval 0.000000
P0: (1.92955,2.48085)
P1: (1.88055,2.46404)
P2: (1.82989,2.44564)
P3: (1.77806,2.42563)
P4: (1.72553,2.40402)
P5: (1.67279,2.38081)
P6: (1.62032,2.35601)
P7: (1.56860,2.32960)
P8: (1.51810,2.30159)
P9: (1.46931,2.27198)
P10: (1.42271,2.24077)
P11: (1.39363,2.21891)
P12: (1.36509,2.19609)
P13: (1.33708,2.17242)
P14: (1.30960,2.14801)
P15: (1.28266,2.12295)
P16: (1.25625,2.09736)
P17: (1.23038,2.07134)
P18: (1.20503,2.04500)
P19: (1.18023,2.01845)
P20: (1.15595,1.99179)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (1.18263,1.97401)
P1: (1.10260,1.92066)
P2: (1.12927,2.00958)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"netflow" at (1.71170,2.15777);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Mirror -> Port
setfillval 0.000000
setfillval 0.000000
P0: (1.79617,1.60055)
P1: (1.81565,1.56758)
P2: (1.83679,1.53318)
P3: (1.85963,1.49803)
P4: (1.88424,1.46283)
P5: (1.91065,1.42827)
P6: (1.93894,1.39504)
P7: (1.96914,1.36384)
P8: (2.00132,1.33535)
P9: (2.03553,1.31029)
P10: (2.07182,1.28933)
P11: (2.17646,1.23651)
P12: (2.27299,1.19543)
P13: (2.36344,1.16609)
P14: (2.44983,1.14848)
P15: (2.53420,1.14261)
P16: (2.61857,1.14848)
P17: (2.70496,1.16609)
P18: (2.79541,1.19543)
P19: (2.89194,1.23651)
P20: (2.99658,1.28933)
P21: (3.02512,1.30421)
P22: (3.05207,1.32191)
P23: (3.07741,1.34207)
P24: (3.10115,1.36431)
P25: (3.12329,1.38825)
P26: (3.14383,1.41353)
P27: (3.16277,1.43977)
P28: (3.18011,1.46660)
P29: (3.19585,1.49364)
P30: (3.20999,1.52052)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
move to P20; line attrs1 to P21 then to P22
move to P22; line attrs1 to P23 then to P24
move to P24; line attrs1 to P25 then to P26
move to P26; line attrs1 to P27 then to P28
move to P28; line attrs1 to P29 then to P30
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (3.18331,1.53830)
P1: (3.25445,1.60055)
P2: (3.23666,1.51163)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"select_src_port" at (2.52975,1.35750);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Mirror -> Port
setfillval 0.000000
setfillval 0.000000
P0: (1.99179,1.76060)
P1: (2.07850,1.76060)
P2: (2.17219,1.76060)
P3: (2.27133,1.76060)
P4: (2.37436,1.76060)
P5: (2.47974,1.76060)
P6: (2.58592,1.76060)
P7: (2.69135,1.76060)
P8: (2.79448,1.76060)
P9: (2.89378,1.76060)
P10: (2.98769,1.76060)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (2.98769,1.79617)
P1: (3.07661,1.76060)
P2: (2.98769,1.73393)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"output_port" at (2.52975,1.82877);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Mirror -> Port
setfillval 0.000000
setfillval 0.000000
P0: (1.99179,1.60055)
P1: (1.99979,1.59788)
P2: (2.00780,1.59521)
P3: (2.01580,1.59254)
P4: (2.02380,1.58988)
P5: (2.03181,1.58721)
P6: (2.03981,1.58454)
P7: (2.04781,1.58187)
P8: (2.05581,1.57921)
P9: (2.06382,1.57654)
P10: (2.07182,1.57387)
P11: (2.17501,1.54698)
P12: (2.26780,1.52521)
P13: (2.35312,1.50889)
P14: (2.43390,1.49833)
P15: (2.51308,1.49384)
P16: (2.59360,1.49576)
P17: (2.67838,1.50441)
P18: (2.77037,1.52009)
P19: (2.87249,1.54314)
P20: (2.98769,1.57387)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (2.97880,1.60055)
P1: (3.07661,1.60055)
P2: (2.99658,1.54720)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"select_dst_port" at (2.53420,1.64204);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	QoS
setfillval 0.000000
box attrs1 wid 0.48016 ht 0.32011 at (2.77428,0.96033);
{
define attrs2 % %
setfillval 0.000000
"QoS" at (2.76984,0.95736);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Port -> QoS
setfillval 0.000000
setfillval 0.000000
P0: (3.20999,1.60055)
P1: (3.18522,1.56461)
P2: (3.15912,1.52642)
P3: (3.13196,1.48643)
P4: (3.10399,1.44505)
P5: (3.07550,1.40270)
P6: (3.04673,1.35982)
P7: (3.01797,1.31684)
P8: (2.98947,1.27418)
P9: (2.96150,1.23226)
P10: (2.93434,1.19152)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (2.96101,1.17373)
P1: (2.88098,1.12038)
P2: (2.90766,1.20930)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"qos" at (3.20554,1.35750);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Interface
setfillval 0.000000
box attrs1 wid 0.69357 ht 0.32011 at (3.52120,0.96033);
{
define attrs2 % %
setfillval 0.000000
"Interface" at (3.52120,0.95736);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Port -> Interface
setfillval 0.000000
setfillval 0.000000
P0: (3.36115,1.60055)
P1: (3.36941,1.56486)
P2: (3.37815,1.52742)
P3: (3.38732,1.48859)
P4: (3.39686,1.44874)
P5: (3.40672,1.40826)
P6: (3.41685,1.36751)
P7: (3.42719,1.32686)
P8: (3.43769,1.28670)
P9: (3.44830,1.24739)
P10: (3.45896,1.20930)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (3.48564,1.20930)
P1: (3.47674,1.12038)
P2: (3.43228,1.20041)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"interfaces" at (3.75239,1.35750);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Queue
setfillval 0.000000
box attrs1 wid 0.55130 ht 0.32011 at (2.77428,0.16005);
{
define attrs2 % %
setfillval 0.000000
"Queue" at (2.77428,0.15709);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	QoS -> Queue
setfillval 0.000000
setfillval 0.000000
P0: (2.77428,0.80027)
P1: (2.77428,0.76483)
P2: (2.77428,0.72800)
P3: (2.77428,0.69000)
P4: (2.77428,0.65103)
P5: (2.77428,0.61132)
P6: (2.77428,0.57108)
P7: (2.77428,0.53051)
P8: (2.77428,0.48984)
P9: (2.77428,0.44927)
P10: (2.77428,0.40903)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (2.80985,0.40903)
P1: (2.77428,0.32011)
P2: (2.74761,0.40903)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"queues value" at (3.18331,0.55723);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Open_vSwitch
setfillval 0.000000
box attrs1 wid 1.03146 ht 0.32011 at (4.49042,3.36115);
{
define attrs2 % %
setfillval 0.000000
"Open_vSwitch" at (4.49042,3.35819);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Open_vSwitch -> Bridge
setfillval 0.000000
setfillval 0.000000
P0: (3.97469,3.20109)
P1: (3.92643,3.18509)
P2: (3.87773,3.16908)
P3: (3.82872,3.15308)
P4: (3.77950,3.13707)
P5: (3.73016,3.12107)
P6: (3.68083,3.10506)
P7: (3.63161,3.08906)
P8: (3.58259,3.07305)
P9: (3.53390,3.05705)
P10: (3.48564,3.04104)
P11: (3.38867,3.00613)
P12: (3.29037,2.97090)
P13: (3.19154,2.93556)
P14: (3.09297,2.90033)
P15: (2.99547,2.86542)
P16: (2.89984,2.83105)
P17: (2.80687,2.79742)
P18: (2.71737,2.76475)
P19: (2.63214,2.73325)
P20: (2.55198,2.70315)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (2.56088,2.66758)
P1: (2.46306,2.66758)
P2: (2.53420,2.72982)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"bridges" at (3.76129,2.95805);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Open_vSwitch -> Controller
setfillval 0.000000
setfillval 0.000000
P0: (4.36594,3.20109)
P1: (4.34122,3.16220)
P2: (4.31543,3.12043)
P3: (4.28911,3.07609)
P4: (4.26279,3.02952)
P5: (4.23700,2.98102)
P6: (4.21228,2.93092)
P7: (4.18917,2.87954)
P8: (4.16818,2.82721)
P9: (4.14986,2.77423)
P10: (4.13475,2.72093)
P11: (4.11548,2.64795)
P12: (4.10010,2.57354)
P13: (4.08825,2.49837)
P14: (4.07955,2.42316)
P15: (4.07361,2.34858)
P16: (4.07008,2.27534)
P17: (4.06858,2.20412)
P18: (4.06873,2.13563)
P19: (4.07016,2.07055)
P20: (4.07250,2.00958)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (4.10807,2.00958)
P1: (4.07250,1.92066)
P2: (4.04583,2.00958)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"controller" at (4.42818,2.55791);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Capability
setfillval 0.000000
box attrs1 wid 0.74692 ht 0.32011 at (5.17510,2.56088);
{
define attrs2 % %
setfillval 0.000000
"Capability" at (5.17510,2.55791);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Open_vSwitch -> Capability
setfillval 0.000000
setfillval 0.000000
P0: (4.63269,3.20109)
P1: (4.66305,3.16515)
P2: (4.69522,3.12697)
P3: (4.72889,3.08698)
P4: (4.76373,3.04559)
P5: (4.79942,3.00325)
P6: (4.83564,2.96037)
P7: (4.87208,2.91739)
P8: (4.90842,2.87473)
P9: (4.94432,2.83281)
P10: (4.97948,2.79207)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (5.00616,2.80985)
P1: (5.03283,2.72093)
P2: (4.95280,2.77428)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"capabilities value" at (5.41518,2.95805);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	SSL
setfillval 0.000000
box attrs1 wid 0.48016 ht 0.32011 at (6.18878,2.56088);
{
define attrs2 % %
setfillval 0.000000
"SSL" at (6.18878,2.55791);
}
linethick = oldlinethick
}
linethick = oldlinethick
{
define attrs1 % %
#	Open_vSwitch -> SSL
setfillval 0.000000
setfillval 0.000000
P0: (5.00616,3.29891)
P1: (5.11780,3.28184)
P2: (5.23244,3.26270)
P3: (5.34771,3.24153)
P4: (5.46128,3.21838)
P5: (5.57079,3.19331)
P6: (5.67390,3.16638)
P7: (5.76827,3.13763)
P8: (5.85153,3.10712)
P9: (5.92135,3.07491)
P10: (5.97538,3.04104)
P11: (5.99617,3.02160)
P12: (6.01585,3.00078)
P13: (6.03436,2.97878)
P14: (6.05163,2.95582)
P15: (6.06763,2.93211)
P16: (6.08229,2.90787)
P17: (6.09557,2.88331)
P18: (6.10740,2.85865)
P19: (6.11774,2.83409)
P20: (6.12654,2.80985)
move to P0; line attrs1 to P1 then to P2
move to P2; line attrs1 to P3 then to P4
move to P4; line attrs1 to P5 then to P6
move to P6; line attrs1 to P7 then to P8
move to P8; line attrs1 to P9 then to P10
move to P10; line attrs1 to P11 then to P12
move to P12; line attrs1 to P13 then to P14
move to P14; line attrs1 to P15 then to P16
move to P16; line attrs1 to P17 then to P18
move to P18; line attrs1 to P19 then to P20
{
define attrs2 % %
define attrs2 % solid %
oldlinethick = linethick;linethick = 1 * scalethickness / 10153
P0: (6.15321,2.81874)
P1: (6.15321,2.72093)
P2: (6.09986,2.80096)
move to P0; line attrs2 to P1
move to P1; line attrs2 to P2
move to P2; line attrs2 to P0
}
linethick = oldlinethick
{
define attrs2 % %
setfillval 0.000000
"ssl" at (6.14877,2.95805);
}
linethick = oldlinethick
}
linethick = oldlinethick
]
.PE
.\"  restore point size and font
.ps \n(.S
.ft \n(DF