From: Ben Pfaff Date: Wed, 25 Aug 2010 16:57:11 +0000 (-0700) Subject: utilities: Remove ovs-monitor. X-Git-Tag: v1.1.0pre1~52 X-Git-Url: http://git.onelab.eu/?p=sliver-openvswitch.git;a=commitdiff_plain;h=1f0af7586e9ffbdbafe00344aca56cd2663b1f62 utilities: Remove ovs-monitor. The ovs-monitor script is now more than adequately replaced by the --monitor option to the various daemons. CC: Simon Horman Signed-off-by: Ben Pfaff --- diff --git a/debian/.gitignore b/debian/.gitignore index 345f3fecc..aa8169b2b 100644 --- a/debian/.gitignore +++ b/debian/.gitignore @@ -11,7 +11,6 @@ /openvswitch-controller /openvswitch-datapath-source /openvswitch-dbg -/openvswitch-monitor /openvswitch-pki /openvswitch-pki-server /openvswitch-switch diff --git a/debian/automake.mk b/debian/automake.mk index 682488a3e..c8b791b49 100644 --- a/debian/automake.mk +++ b/debian/automake.mk @@ -23,10 +23,6 @@ EXTRA_DIST += \ debian/openvswitch-datapath-source.copyright \ debian/openvswitch-datapath-source.dirs \ debian/openvswitch-datapath-source.install \ - debian/openvswitch-monitor.default \ - debian/openvswitch-monitor.dirs \ - debian/openvswitch-monitor.init \ - debian/openvswitch-monitor.install \ debian/openvswitch-pki-server.apache2 \ debian/openvswitch-pki-server.dirs \ debian/openvswitch-pki-server.install \ diff --git a/debian/control b/debian/control index 9dfc4b57d..32a8fca13 100644 --- a/debian/control +++ b/debian/control @@ -99,15 +99,6 @@ Description: Debug symbols for Open vSwitch packages packages. Install it to debug one of them or to examine a core dump produced by one of them. -Package: openvswitch-monitor -Architecture: any -Recommends: openvswitch-switch -Depends: ${shlibs:Depends}, ${misc:Depends} -Description: Monitor utility for Open vSwitch switches - The ovs-monitor utility included in this package monitors the - ovs-openflowd process and the kernel datapath. If either become - unresponsive, it reboots the machine. - Package: openvswitch-wdt Architecture: any Recommends: openvswitch-switch diff --git a/debian/openvswitch-monitor.default b/debian/openvswitch-monitor.default deleted file mode 100644 index e61e91e7f..000000000 --- a/debian/openvswitch-monitor.default +++ /dev/null @@ -1,28 +0,0 @@ -# This is a POSIX shell fragment -*- sh -*- - -# To configure the Open vSwitch monitor package, modify the following. -# Afterward, the monitor will be configured automatically at boot time. -# It can be started immediately with -# /etc/init.d/openvswitch-monitor start - -# Defaults for initscript -# sourced by /etc/init.d/openvswitch-monitor -# installed at /etc/default/openvswitch-monitor by the maintainer scripts - -# THRESHOLD: The number of failed attempts the monitor should make until -# it reboots the system. A value of zero disables the monitor. -THRESHOLD=3 - -# INTERVAL: The number of seconds to wait between probing -# ovs-openflowd and the datapath. -INTERVAL=1 - -# LOG_FILE: File to log messages related to monitoring. -LOG_FILE="/var/log/openvswitch/ovs-monitor.log" - -# SWITCH_VCONN: The vconn used to connect to the switch -# (ovs-openflowd). The ovs-openflowd must be configured to listen to -# this vconn. The default here set is also listened to by default by -# the openvswitch-switch package, so ordinarily there is no need to -# modify this. -SWITCH_VCONN="/var/run/openvswitch/ovs-openflowd.mgmt" diff --git a/debian/openvswitch-monitor.dirs b/debian/openvswitch-monitor.dirs deleted file mode 100644 index 236670a2d..000000000 --- a/debian/openvswitch-monitor.dirs +++ /dev/null @@ -1 +0,0 @@ -usr/sbin diff --git a/debian/openvswitch-monitor.init b/debian/openvswitch-monitor.init deleted file mode 100755 index 62c0ac8f7..000000000 --- a/debian/openvswitch-monitor.init +++ /dev/null @@ -1,175 +0,0 @@ -#!/bin/sh -# -# Example init.d script with LSB support. -# -# Please read this init.d carefully and modify the sections to -# adjust it to the program you want to run. -# -# Copyright (c) 2007, 2009 Javier Fernandez-Sanguino -# -# This is free software; you may redistribute it and/or modify -# it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2, -# or (at your option) any later version. -# -# This is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License with -# the Debian operating system, in /usr/share/common-licenses/GPL; if -# not, write to the Free Software Foundation, Inc., 59 Temple Place, -# Suite 330, Boston, MA 02111-1307 USA -# -### BEGIN INIT INFO -# Provides: openvswitch-monitor -# Required-Start: $network $local_fs $remote_fs -# Required-Stop: $remote_fs -# Should-Start: $named $syslog openvswitch-switch -# Should-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Open vSwitch switch monitor -### END INIT INFO - -PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin - -DAEMON=/usr/sbin/ovs-monitor -NAME=ovs-monitor -DESC="Open vSwitch switch monitor" - -PIDFILE=/var/run/openvswitch/$NAME.pid - -test -x $DAEMON || exit 0 - -. /lib/lsb/init-functions - -# Default options, these can be overriden by the information -# at /etc/default/openvswitch-monitor -DAEMON_OPTS="" # Additional options given to the daemon - -DODTIME=10 # Time to wait for the daemon to die, in seconds - # If this value is set too low you might not - # let some daemons to die gracefully and - # 'restart' will not work - -# Include defaults if available -default=/etc/default/openvswitch-monitor -if [ -f $default ] ; then - . $default -fi - -set -e - -running_pid() { -# Check if a given process pid's cmdline matches a given name - pid=$1 - name=$2 - [ -z "$pid" ] && return 1 - [ ! -d /proc/$pid ] && return 1 - return 0 -} - -running() { -# Check if the process is running looking at /proc -# (works for all users) - - # No pidfile, probably no daemon present - [ ! -f "$PIDFILE" ] && return 1 - pid=`cat $PIDFILE` - running_pid $pid $DAEMON || return 1 - return 0 -} - -start_daemon() { -# Start the process using the wrapper - if test $THRESHOLD != 0; then - start-stop-daemon --start --quiet -m --background --pidfile $PIDFILE \ - --exec $DAEMON -- -c $THRESHOLD -i $INTERVAL -l $LOG_FILE \ - -s $SWITCH_VCONN $DAEMON_OPTS - fi - - # Wait up to 3 seconds for the daemon to start. - for i in 1 2 3; do - if running; then - break - fi - sleep 1 - done -} - -stop_daemon() { - start-stop-daemon -o --stop --pidfile $PIDFILE - rm $PIDFILE -} - -case "$1" in - start) - log_daemon_msg "Starting $DESC " "$NAME" - # Check if it's running first - if running ; then - log_progress_msg "apparently already running" - log_end_msg 0 - exit 0 - fi - if start_daemon && running ; then - # It's ok, the daemon started and is running - log_end_msg 0 - else - # Either we could not start it or it is not running - # after we did - # NOTE: Some daemons might die some time after they start, - # this code does not try to detect this and might give - # a false positive (use 'status' for that) - log_end_msg 1 - fi - ;; - stop) - log_daemon_msg "Stopping $DESC" "$NAME" - if running ; then - # Only stop the daemon if we see it running - stop_daemon - log_end_msg $? - else - # If it's not running don't do anything - log_progress_msg "apparently not running" - log_end_msg 0 - exit 0 - fi - ;; - restart|force-reload) - log_daemon_msg "Restarting $DESC" "$NAME" - if running ; then - stop_daemon - # Wait some sensible amount, some daemons need this - [ -n "$DIETIME" ] && sleep $DIETIME - fi - start_daemon - running - log_end_msg $? - ;; - status) - log_daemon_msg "Checking status of $DESC" "$NAME" - if running ; then - log_progress_msg "running" - log_end_msg 0 - else - log_progress_msg "apparently not running" - log_end_msg 1 - exit 1 - fi - ;; - # Use this if the daemon cannot reload - reload) - log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon" - log_warning_msg "cannot re-read the config file (use restart)." - ;; - *) - N=/etc/init.d/openvswitch-monitor - echo "Usage: $N {start|stop|restart|force-reload|status}" >&2 - exit 1 - ;; -esac - -exit 0 diff --git a/debian/openvswitch-monitor.install b/debian/openvswitch-monitor.install deleted file mode 100644 index 9fc601a8a..000000000 --- a/debian/openvswitch-monitor.install +++ /dev/null @@ -1 +0,0 @@ -utilities/ovs-monitor usr/sbin diff --git a/utilities/automake.mk b/utilities/automake.mk index 280ee87af..1fed6bbe3 100644 --- a/utilities/automake.mk +++ b/utilities/automake.mk @@ -9,7 +9,6 @@ bin_PROGRAMS += \ utilities/ovs-vsctl bin_SCRIPTS += utilities/ovs-pki utilities/ovs-vsctl noinst_SCRIPTS += utilities/ovs-pki-cgi utilities/ovs-parse-leaks -dist_sbin_SCRIPTS += utilities/ovs-monitor EXTRA_DIST += \ utilities/ovs-appctl.8.in \ diff --git a/utilities/ovs-monitor b/utilities/ovs-monitor deleted file mode 100755 index 9df05f0d3..000000000 --- a/utilities/ovs-monitor +++ /dev/null @@ -1,127 +0,0 @@ -#!/bin/sh - -# Copyright (C) 2008, 2009 Nicira Networks, Inc. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin - -OPENFLOWD_PID=/var/run/openvswitch/ovs-openflowd.pid -OPENFLOWD_SOCK=/var/run/openvswitch/ovs-openflowd.mgmt -LOG_FILE=/var/log/openvswitch/ovs-monitor.log -INTERVAL=1 -FAIL_THRESH=3 - -usage() { - echo usage: $0 options - echo - echo "OPTIONS:" - echo " -h Show this message" - echo " -p PID file for ovs-openflowd (default: $OPENFLOWD_PID)" - echo " -s Unix socket for ovs-openflowd (default: $OPENFLOWD_SOCK)" - echo " -l File to log messages (default: $LOG_FILE)" - echo " -i Interval to send probes in seconds (default: $INTERVAL)" - echo " -c Number of failed probes before reboot (default: $FAIL_THRESH)" -} - -log() { - echo `date +"%b %d %X"`:$1 - echo `date +"%b %d %X"`:$1 >> $LOG_FILE -} - - -while getopts "hp:s:l:i:c:" OPTION; do - case $OPTION in - h) - usage - exit 1 - ;; - - p) - OPENFLOWD_PID=$OPTARG - ;; - - s) - OPENFLOWD_SOCK=$OPTARG - ;; - - l) - LOG_FILE=$OPTARG - ;; - - i) - INTERVAL=$OPTARG - ;; - - c) - FAIL_THRESH=$OPTARG - ;; - - *) - echo "Unknown option: ${OPTION}" - esac -done - - -if [ ! -f $OPENFLOWD_PID ]; then - log "No ovs-openflowd pid file: ${OPENFLOWD_PID}" - echo "No ovs-openflowd pid file: ${OPENFLOWD_PID}" -fi - -if [ ! -S $OPENFLOWD_SOCK ]; then - log "No ovs-openflowd sock file: ${OPENFLOWD_SOCK}" - echo "No ovs-openflowd sock file: ${OPENFLOWD_SOCK}" -fi - -if [ ! -d `dirname $LOG_FILE` ]; then - mkdir -p `dirname $LOG_FILE` -fi - -let DP_DOWN=0 -let OPENFLOWD_DOWN=0 -log "===== Starting Monitor ====" -while `/bin/true`; do - # Only check for liveness if ovs-openflowd's PID file exists. The PID - # file is removed when ovs-openflowd is brought down gracefully. - if [ -f $OPENFLOWD_PID ]; then - pid=`cat $OPENFLOWD_PID` - if [ -d /proc/$pid ]; then - # Check if the ovs-openflowd and datapath still can communicate - if [ -S $OPENFLOWD_SOCK ]; then - ovs-ofctl probe -t 2 unix:$OPENFLOWD_SOCK - if [ $? -ne 0 ]; then - log "datapath probe failed" - let DP_DOWN++ - else - let DP_DOWN=0 - fi - fi - let OPENFLOWD_DOWN=0 - else - log "ovs-openflowd probe failed" - let OPENFLOWD_DOWN++ - fi - fi - - if [ $OPENFLOWD_DOWN -ge $FAIL_THRESH ]; then - log "Failed to probe ovs-openflowd after ${OPENFLOWD_DOWN} tries...rebooting!" - reboot - fi - - if [ $DP_DOWN -ge $FAIL_THRESH ]; then - log "Failed to probe datapath after ${DP_DOWN} tries...rebooting!" - reboot - fi - - sleep $INTERVAL -done diff --git a/xenserver/openvswitch-xen.spec b/xenserver/openvswitch-xen.spec index d2433f986..0b3c65591 100644 --- a/xenserver/openvswitch-xen.spec +++ b/xenserver/openvswitch-xen.spec @@ -97,7 +97,6 @@ rm \ $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \ $RPM_BUILD_ROOT/usr/bin/ovs-pki \ $RPM_BUILD_ROOT/usr/bin/ovs-wdt \ - $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \