From 3d92fe960c9ad10fab3978623e4f77045340c36b Mon Sep 17 00:00:00 2001 From: Ben Pfaff Date: Mon, 30 Aug 2010 10:03:46 -0700 Subject: [PATCH] Remove openvswitch-switch-config package. This package was never used by many users, has not worked properly for a while, and causes lintian warnings, so remove it. CC: Simon Horman Signed-off-by: Ben Pfaff --- debian/.gitignore | 1 - debian/automake.mk | 10 - debian/control | 9 - debian/openvswitch-switch-config.dirs | 1 - debian/openvswitch-switch-config.install | 1 - debian/openvswitch-switch-config.manpages | 1 - debian/openvswitch-switch-config.overrides | 1 - debian/openvswitch-switch-config.templates | 225 -------- debian/openvswitch-switch.README.Debian | 10 +- debian/ovs-switch-setup | 615 --------------------- debian/ovs-switch-setup.8 | 41 -- debian/po/POTFILES.in | 1 - debian/po/templates.pot | 513 ----------------- debian/reconfigure | 128 ----- debian/rules | 2 - 15 files changed, 4 insertions(+), 1555 deletions(-) delete mode 100644 debian/openvswitch-switch-config.dirs delete mode 100644 debian/openvswitch-switch-config.install delete mode 100644 debian/openvswitch-switch-config.manpages delete mode 100644 debian/openvswitch-switch-config.overrides delete mode 100644 debian/openvswitch-switch-config.templates delete mode 100755 debian/ovs-switch-setup delete mode 100644 debian/ovs-switch-setup.8 delete mode 100644 debian/po/POTFILES.in delete mode 100644 debian/po/templates.pot delete mode 100755 debian/reconfigure diff --git a/debian/.gitignore b/debian/.gitignore index 3a6b6bb81..3beef4405 100644 --- a/debian/.gitignore +++ b/debian/.gitignore @@ -14,5 +14,4 @@ /openvswitch-pki /openvswitch-pki-server /openvswitch-switch -/openvswitch-switch-config /openvswitch-switch.copyright diff --git a/debian/automake.mk b/debian/automake.mk index 51eeed5ae..5a23d4632 100644 --- a/debian/automake.mk +++ b/debian/automake.mk @@ -28,11 +28,6 @@ EXTRA_DIST += \ debian/openvswitch-pki-server.install \ debian/openvswitch-pki-server.postinst \ debian/openvswitch-pki.postinst \ - debian/openvswitch-switch-config.dirs \ - debian/openvswitch-switch-config.install \ - debian/openvswitch-switch-config.manpages \ - debian/openvswitch-switch-config.overrides \ - debian/openvswitch-switch-config.templates \ debian/openvswitch-switch.README.Debian \ debian/openvswitch-switch.dirs \ debian/openvswitch-switch.init \ @@ -42,11 +37,6 @@ EXTRA_DIST += \ debian/openvswitch-switch.postinst \ debian/openvswitch-switch.postrm \ debian/openvswitch-switch.template \ - debian/ovs-switch-setup \ - debian/ovs-switch-setup.8 \ - debian/po/POTFILES.in \ - debian/po/templates.pot \ - debian/reconfigure \ debian/rules \ debian/rules.modules diff --git a/debian/control b/debian/control index fac33797d..c07eca08a 100644 --- a/debian/control +++ b/debian/control @@ -40,15 +40,6 @@ Description: Open vSwitch switch implementations . Open vSwitch is a full-featured software-based Ethernet switch. -Package: openvswitch-switch-config -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends}, openvswitch-switch (= ${binary:Version}), libwww-perl, libdigest-sha1-perl -Description: Open vSwitch switch implementations - openvswitch-switch-config provides a utility for interactively configuring - the Open vSwitch switch provided in the openvswitch-switch package. - . - Open vSwitch is a full-featured software-based Ethernet switch. - Package: openvswitch-pki Architecture: all Depends: diff --git a/debian/openvswitch-switch-config.dirs b/debian/openvswitch-switch-config.dirs deleted file mode 100644 index 881ded8ae..000000000 --- a/debian/openvswitch-switch-config.dirs +++ /dev/null @@ -1 +0,0 @@ -/usr/share/lintian/overrides diff --git a/debian/openvswitch-switch-config.install b/debian/openvswitch-switch-config.install deleted file mode 100644 index c8cbf17f1..000000000 --- a/debian/openvswitch-switch-config.install +++ /dev/null @@ -1 +0,0 @@ -debian/ovs-switch-setup usr/sbin diff --git a/debian/openvswitch-switch-config.manpages b/debian/openvswitch-switch-config.manpages deleted file mode 100644 index 0e1227932..000000000 --- a/debian/openvswitch-switch-config.manpages +++ /dev/null @@ -1 +0,0 @@ -debian/ovs-switch-setup.8 diff --git a/debian/openvswitch-switch-config.overrides b/debian/openvswitch-switch-config.overrides deleted file mode 100644 index 4ac77abac..000000000 --- a/debian/openvswitch-switch-config.overrides +++ /dev/null @@ -1 +0,0 @@ -debconf-is-not-a-registry diff --git a/debian/openvswitch-switch-config.templates b/debian/openvswitch-switch-config.templates deleted file mode 100644 index bfb228dd8..000000000 --- a/debian/openvswitch-switch-config.templates +++ /dev/null @@ -1,225 +0,0 @@ -Template: openvswitch-switch/netdevs -Type: multiselect -_Choices: ${choices} -_Description: Open vSwitch network devices: - Choose the network devices that should become part of the Open vSwitch - instance. At least two devices must be selected for this machine to be - a useful switch. Unselecting all network devices will disable - Open vSwitch entirely. - . - The network devices that you select should not be configured with IP - or IPv6 addresses, even if the switch contacts the controller over - one of the selected network devices. This is because a running - Open vSwitch takes over network devices at a low level: they - become part of the switch and cannot be used for other purposes. - -Template: openvswitch-switch/no-netdevs -Type: error -_Description: No network devices were selected. - No network devices were selected for inclusion in the Open vSwitch - instance. The switch will be disabled. - -Template: openvswitch-switch/configured-netdevs -Type: note -_Description: Some Network Devices Have IP or IPv6 Addresses - The following network devices selected to be part of the Open vSwitch - instance have IP or IPv6 addresses configured: - . - ${configured-netdevs} - . - This is usually a mistake, even if the switch contacts the controller over - one of the selected network devices. This is because running Open vSwitch - takes over network devices at a low level: they become part of the switch - and cannot be used for other purposes. - . - If this is an unintentional mistake, move back and fix the selection, - or de-configure the IP or IPv6 from these network devices. - -Template: openvswitch-switch/mode -Type: select -_Choices: discovery, in-band, out-of-band -Default: discovery -_Description: Switch-to-controller access method: - Open vSwitch must be able to contact the OpenFlow controller over the - network. It can do so in one of three ways: - . - discovery: A single network is used for OpenFlow traffic and other - data traffic; that is, the switch contacts the controller over one of - the network devices selected as Open vSwitch network devices in - the previous question. The switch automatically determines the - location of the controller using a DHCP request with an - OpenFlow-specific vendor option. This is the most common case. - . - in-band: As above, but the location of the controller is manually - configured. - . - out-of-band: OpenFlow traffic uses a network separate from the data traffic - that it controls. If this is the case, the control network must already - be configured on a network device other than one of those selected as - an Open vSwitch netdev in the previous question. - -Template: openvswitch-switch/discover -Type: note -_Description: Preparing to discover controller - The setup program will now attempt to discover the OpenFlow controller. - Controller discovery may take up to 30 seconds. Please be patient. - . - See ovs-openflowd(8) for instructions on how to configure a DHCP server for - controller discovery. - -Template: openvswitch-switch/discovery-failure -Type: error -_Description: Controller discovery failed. - The controller's location could not be determined automatically. - . - Ensure that the OpenFlow DHCP server is properly configured. See - ovs-openflowd(8) for instructions on how to configure a DHCP server for - controller discovery. - -Template: openvswitch-switch/discovery-success -Type: boolean -Default: true -_Description: Use discovered settings? - Controller discovery obtained the following settings: - . - Controller location: ${controller-vconn} - . - PKI URL: ${pki-uri} - . - Please verify that these settings are correct. - -Template: openvswitch-switch/switch-ip -Type: string -Default: dhcp -_Description: Switch IP address: - For in-band communication with the controller, the Open vSwitch instance - must be able to determine its own IP address. Its IP address may be - configured statically or dynamically. - . - For static configuration, specify the switch's IP address as a string. - . - For dynamic configuration with DHCP (the most common case), specify "dhcp". - Configuration with DHCP will only work reliably if the network topology - allows the switch to contact the DHCP server before it connects to the - OpenFlow controller. - -Template: openvswitch-switch/switch-ip-error -Type: error -_Description: The switch IP address is invalid. - The switch IP address must specified as "dhcp" or a valid IP address in - dotted-octet form (e.g. "1.2.3.4"). - -Template: openvswitch-switch/controller-vconn -Type: string -_Description: Controller location: - Specify how Open vSwitch should connect to the OpenFlow controller. The - value should be in form "ssl:IP[:PORT]" to connect to the controller - over SSL (recommended for security) or "tcp:IP[:PORT]" to connect over - cleartext TCP. - -Template: openvswitch-switch/controller-vconn-error -Type: error -_Description: The controller location is invalid. - The controller location must be specifed as "ssl:IP[:PORT]" to - connect to the controller over SSL (recommended for security) or - "tcp:IP[:PORT]" to connect over cleartext TCP. - -Template: openvswitch-switch/pki-uri -Type: string -_Description: Open vSwitch PKI server host name or URL: - Specify a URL to the Open vSwitch public key infrastructure (PKI). If a - host name or IP address is specified in place of a URL, then - http:///openvswitch/pki/ will be used, - where is the specified host name or IP address. - . - The Open vSwitch PKI is usually on the same machine as the OpenFlow - controller. - . - The setup process will connect to the Open vSwitch PKI server over - HTTP, using the system's configured default HTTP proxy (if any). - -Template: openvswitch-switch/fetch-cacert-failed -Type: error -_Description: The switch CA certificate could not be retrieved. - Retrieval of ${url} failed, with the following status: "${error}". - . - Ensure that the Open vSwitch PKI server is correctly configured and - available at ${pki-uri}. If the system is configured to use an HTTP - proxy, also make sure that the HTTP proxy is available and that the - PKI server can be reached through it. - -Template: openvswitch-switch/verify-controller-ca -Type: boolean -Default: true -_Description: Is ${fingerprint} the controller CA's fingerprint? - If a man-in-the-middle attack is possible in your network - environment, check that the controller CA's fingerprint is really - ${fingerprint}. Answer "true" if it matches, "false" if - there is a discrepancy. - . - If a man-in-the-middle attack is not a concern, there is no need to - verify the fingerprint. Simply answer "true". - -Template: openvswitch-switch/send-cert-req -Type: boolean -Default: true -_Description: Send certificate request to switch CA? - Before it can connect to the controller over SSL, the Open vSwitch's - key must be signed by the switch certificate authority (CA) located - on the Open vSwitch PKI server, which is usually collocated with - the OpenFlow controller. A signing request can be sent to the PKI - server now. - . - Answer "true" to send a signing request to the switch CA now. This is - ordinarily the correct choice. There is no harm in sending a given - signing request more than once. - . - Answer "false" to skip sending a signing request to the switch CA. - Unless the request has already been sent to the switch CA, manual - sending of the request and signing will be necessary. - -Template: openvswitch-switch/send-cert-req-failed -Type: error -_Description: The certificate request could not be sent. - Posting to ${url} failed, with the following status: "${error}". - . - Ensure that the Open vSwitch PKI server is correctly configured and - available at ${pki-uri}. - -Template: openvswitch-switch/fetch-switch-cert -Type: boolean -_Description: Fetch signed switch certificate from PKI server? - Before it can connect to the controller over SSL, the Open vSwitch's - key must be signed by the switch certificate authority (CA) located - on the Open vSwitch PKI server, which is usually collocated with the - OpenFlow controller. - . - At this point, a signing request has been sent to the switch CA (or - sending a request has been manually skipped), but the signed - certificate has not yet been retrieved. Manual action may need to be - taken at the PKI server to approve the signing request. - . - Answer "true" to attempt to retrieve the signed switch certificate - from the switch CA. If the switch certificate request has been - signed at the PKI server, this is the correct choice. - . - Answer "false" to postpone switch configuration. The configuration - process must be restarted later, when the switch certificate request - has been signed. - -Template: openvswitch-switch/fetch-switch-cert-failed -Type: error -_Description: Signed switch certificate could not be retrieved. - The signed switch certificate could not be retrieved from the switch - CA: retrieval of ${url} failed, with the following status: "${error}". - . - This probably indicates that the switch's certificate request has not - yet been signed. If this is the problem, it may be fixed by signing - the certificate request at ${pki-uri}, then trying to fetch the - signed switch certificate again. - -Template: openvswitch-switch/complete -Type: note -_Description: Open vSwitch Setup Finished - Setup of this Open vSwitch instance is finished. Complete the setup - procedure to enable the switch. diff --git a/debian/openvswitch-switch.README.Debian b/debian/openvswitch-switch.README.Debian index eb504f655..ef92d3eef 100644 --- a/debian/openvswitch-switch.README.Debian +++ b/debian/openvswitch-switch.README.Debian @@ -1,11 +1,9 @@ README.Debian for openvswitch-switch --------------------------------- -* The switch must be configured before it can be used. To configure - it interactively, install the openvswitch-switch-config package and run - the ovs-switch-setup program. Alternatively, edit - /etc/default/openvswitch-switch by hand, then start the switch manually - with "/etc/init.d/openvswitch-switch start". +* The switch must be configured before it can be used. Edit + /etc/default/openvswitch-switch, then start the switch manually with + "/etc/init.d/openvswitch-switch start". * To use the Linux kernel-based switch implementation, you will need to build and install the Open vSwitch kernel module. To do so, install @@ -15,4 +13,4 @@ README.Debian for openvswitch-switch * This package does not yet support the userspace datapath-based switch implementation. - -- Ben Pfaff , Mon, 11 May 2009 13:29:43 -0700 + -- Ben Pfaff , Mon, 30 Aug 2010 09:51:19 -0700 diff --git a/debian/ovs-switch-setup b/debian/ovs-switch-setup deleted file mode 100755 index e6e26fb3a..000000000 --- a/debian/ovs-switch-setup +++ /dev/null @@ -1,615 +0,0 @@ -#! /usr/bin/perl - -use POSIX; -use Debconf::Client::ConfModule ':all'; -use HTTP::Request; -use LWP::UserAgent; -use Digest::SHA1 'sha1_hex'; -use strict; -use warnings; - -# XXX should support configuring SWITCH_NETMASK and SWITCH_GATEWAY -# when the mode is in-band. - -my $debconf_owner = 'openvswitch-switch'; - -my $default = '/etc/default/openvswitch-switch'; -my $template = '/usr/share/openvswitch/switch/default.template'; -my $etc = '/etc/openvswitch'; -my $rundir = '/var/run/openvswitch'; -my $privkey_file = "$etc/of0-privkey.pem"; -my $req_file = "$etc/of0-req.pem"; -my $cert_file = "$etc/of0-cert.pem"; -my $cacert_file = "$etc/cacert.pem"; -my $ovs_discover_pidfile = "$rundir/ovs-discover.pid"; - -my $ua = LWP::UserAgent->new; -$ua->timeout(10); -$ua->env_proxy; - -system("/etc/init.d/openvswitch-switch stop 1>&2"); -kill_ovs_discover(); - -version('2.0'); -capb('backup'); -title('Open vSwitch Switch Setup'); - -my (%netdevs) = find_netdevs(); -db_subst('netdevs', 'choices', - join(', ', map($netdevs{$_}, sort(keys(%netdevs))))); -db_set('netdevs', join(', ', grep(!/IP/, values(%netdevs)))); - -my %oldconfig; -if (-e $default) { - %oldconfig = load_config($default); - - my (%map) = - (NETDEVS => sub { - db_set('netdevs', join(', ', map($netdevs{$_}, - grep(exists $netdevs{$_}, split)))) - }, - MODE => sub { - db_set('mode', - $_ eq 'in-band' || $_ eq 'out-of-band' ? $_ : 'discovery') - }, - SWITCH_IP => sub { db_set('switch-ip', $_) }, - CONTROLLER => sub { db_set('controller-vconn', $_) }, - PRIVKEY => sub { $privkey_file = $_ }, - CERT => sub { $cert_file = $_ }, - CACERT => sub { $cacert_file = $_ }, - ); - - for my $key (keys(%map)) { - local $_ = $oldconfig{$key}; - &{$map{$key}}() if defined && !/^\s*$/; - } -} elsif (-e $template) { - %oldconfig = load_config($template); -} - -my $cacert_preverified = -e $cacert_file; -my ($req, $req_fingerprint); - -my %options; - -my (@states) = - (sub { - # User backed up from first dialog box. - exit(10); - }, - sub { - # Prompt for ports to include in switch. - db_input('netdevs'); - return; - }, - sub { - # Validate the chosen ports. - my (@netdevs) = split(', ', db_get('netdevs')); - if (!@netdevs) { - # No ports chosen. Disable switch. - db_input('no-netdevs'); - return 'prev' if db_go(); - return 'done'; - } elsif (my (@conf_netdevs) = grep(/IP/, @netdevs)) { - # Point out that some ports have configured IP addresses. - db_subst('configured-netdevs', 'configured-netdevs', - join(', ', @conf_netdevs)); - db_input('configured-netdevs'); - return; - } else { - # Otherwise proceed. - return 'skip'; - } - }, - sub { - # Discovery or in-band or out-of-band controller? - db_input('mode'); - return; - }, - sub { - return 'skip' if db_get('mode') ne 'discovery'; - for (;;) { - # Notify user that we are going to do discovery. - db_input('discover'); - return 'prev' if db_go(); - print STDERR "Please wait up to 30 seconds for discovery...\n"; - - # Make sure that there's no running discovery process. - kill_ovs_discover(); - - # Do discovery. - %options = (); - open(DISCOVER, '-|', 'ovs-discover --timeout=30 --pidfile ' - . join(' ', netdev_names())); - while () { - chomp; - if (my ($name, $value) = /^([^=]+)=(.*)$/) { - if ($value =~ /^"(.*)"$/) { - $value = $1; - $value =~ s/\\([0-7][0-7][0-7])/chr($1)/ge; - } else { - $value =~ s/^(0x[[:xdigit:]]+)$/hex($1)/e; - $value = '' if $value eq 'empty'; - next if $value eq 'null'; # Shouldn't happen. - } - $options{$name} = $value; - } - last if /^$/; - } - - # Check results. - my $vconn = $options{'ovs-controller-vconn'}; - my $pki_uri = $options{'ovs-pki-uri'}; - return 'next' - if (defined($vconn) - && is_valid_vconn($vconn) - && (!is_ssl_vconn($vconn) || defined($pki_uri))); - - # Try again? - kill_ovs_discover(); - db_input('discovery-failure'); - db_go(); - } - }, - sub { - return 'skip' if db_get('mode') ne 'discovery'; - - my $vconn = $options{'ovs-controller-vconn'}; - my $pki_uri = $options{'ovs-pki-uri'}; - db_subst('discovery-success', 'controller-vconn', $vconn); - db_subst('discovery-success', - 'pki-uri', is_ssl_vconn($vconn) ? $pki_uri : "no PKI in use"); - db_input('discovery-success'); - return 'prev' if db_go(); - db_set('controller-vconn', $vconn); - db_set('pki-uri', $pki_uri); - return 'next'; - }, - sub { - return 'skip' if db_get('mode') ne 'in-band'; - for (;;) { - db_input('switch-ip'); - return 'prev' if db_go(); - - my $ip = db_get('switch-ip'); - return 'next' if $ip =~ /^dhcp|\d+\.\d+.\d+.\d+$/i; - - db_input('switch-ip-error'); - db_go(); - } - }, - sub { - return 'skip' if db_get('mode') eq 'discovery'; - for (;;) { - my $old_vconn = db_get('controller-vconn'); - db_input('controller-vconn'); - return 'prev' if db_go(); - - my $vconn = db_get('controller-vconn'); - if (is_valid_vconn($vconn)) { - if ($old_vconn ne $vconn || db_get('pki-uri') eq '') { - db_set('pki-uri', pki_host_to_uri($2)); - } - return 'next'; - } - - db_input('controller-vconn-error'); - db_go(); - } - }, - sub { - return 'skip' if !ssl_enabled(); - - if (! -e $privkey_file) { - my $old_umask = umask(077); - run_cmd("ovs-pki req $etc/of0 >&2 2>/dev/null"); - chmod(0644, $req_file) or die "$req_file: chmod: $!\n"; - umask($old_umask); - } - - if (! -e $cert_file) { - open(REQ, '<', $req_file) or die "$req_file: open: $!\n"; - $req = join('', ); - close(REQ); - $req_fingerprint = sha1_hex($req); - } - return 'skip'; - }, - sub { - return 'skip' if !ssl_enabled(); - return 'skip' if -e $cacert_file && -e $cert_file; - - db_input('pki-uri'); - return 'prev' if db_go(); - return; - }, - sub { - return 'skip' if !ssl_enabled(); - return 'skip' if -e $cacert_file; - - my $pki_uri = db_get('pki-uri'); - if ($pki_uri !~ /:/) { - $pki_uri = pki_host_to_uri($pki_uri); - } else { - # Trim trailing slashes. - $pki_uri =~ s%/+$%%; - } - db_set('pki-uri', $pki_uri); - - my $url = "$pki_uri/controllerca/cacert.pem"; - my $response = $ua->get($url, ':content_file' => $cacert_file); - if ($response->is_success) { - return 'next'; - } - - db_subst('fetch-cacert-failed', 'url', $url); - db_subst('fetch-cacert-failed', 'error', $response->status_line); - db_subst('fetch-cacert-failed', 'pki-uri', $pki_uri); - db_input('fetch-cacert-failed'); - db_go(); - return 'prev'; - }, - sub { - return 'skip' if !ssl_enabled(); - return 'skip' if -e $cert_file; - - for (;;) { - db_set('send-cert-req', 'true'); - db_input('send-cert-req'); - return 'prev' if db_go(); - return 'next' if db_get('send-cert-req') eq 'false'; - - my $pki_uri = db_get('pki-uri'); - my ($pki_base_uri) = $pki_uri =~ m%^([^/]+://[^/]+)/%; - my $url = "$pki_base_uri/cgi-bin/ovs-pki-cgi"; - my $response = $ua->post($url, {'type' => 'switch', - 'req' => $req}); - return 'next' if $response->is_success; - - db_subst('send-cert-req-failed', 'url', $url); - db_subst('send-cert-req-failed', 'error', - $response->status_line); - db_subst('send-cert-req-failed', 'pki-uri', $pki_uri); - db_input('send-cert-req-failed'); - db_go(); - } - }, - sub { - return 'skip' if !ssl_enabled(); - return 'skip' if $cacert_preverified; - - my ($cacert_fingerprint) = x509_fingerprint($cacert_file); - db_subst('verify-controller-ca', 'fingerprint', $cacert_fingerprint); - db_input('verify-controller-ca'); - return 'prev' if db_go(); - return 'next' if db_get('verify-controller-ca') eq 'true'; - unlink($cacert_file); - return 'prev'; - }, - sub { - return 'skip' if !ssl_enabled(); - return 'skip' if -e $cert_file; - - for (;;) { - db_set('fetch-switch-cert', 'true'); - db_input('fetch-switch-cert'); - return 'prev' if db_go(); - exit(1) if db_get('fetch-switch-cert') eq 'false'; - - my $pki_uri = db_get('pki-uri'); - my $url = "$pki_uri/switchca/certs/$req_fingerprint-cert.pem"; - my $response = $ua->get($url, ':content_file' => $cert_file); - if ($response->is_success) { - return 'next'; - } - - db_subst('fetch-switch-cert-failed', 'url', $url); - db_subst('fetch-switch-cert-failed', 'error', - $response->status_line); - db_subst('fetch-switch-cert-failed', 'pki-uri', $pki_uri); - db_input('fetch-switch-cert-failed'); - db_go(); - } - }, - sub { - db_input('complete'); - db_go(); - return; - }, - sub { - return 'done'; - }, -); - -my $state = 1; -my $direction = 1; -for (;;) { - my $ret = &{$states[$state]}(); - $ret = db_go() ? 'prev' : 'next' if !defined $ret; - if ($ret eq 'next') { - $direction = 1; - } elsif ($ret eq 'prev') { - $direction = -1; - } elsif ($ret eq 'skip') { - # Nothing to do. - } elsif ($ret eq 'done') { - last; - } else { - die "unknown ret $ret"; - } - $state += $direction; -} - -my %config = %oldconfig; -$config{NETDEVS} = join(' ', netdev_names()); -$config{MODE} = db_get('mode'); -if (db_get('mode') eq 'in-band') { - $config{SWITCH_IP} = db_get('switch-ip'); -} -if (db_get('mode') ne 'discovery') { - $config{CONTROLLER} = db_get('controller-vconn'); -} -$config{PRIVKEY} = $privkey_file; -$config{CERT} = $cert_file; -$config{CACERT} = $cacert_file; -save_config($default, %config); - -dup2(2, 1); # Get stdout back. -kill_ovs_discover(); -system("/etc/init.d/openvswitch-switch start"); - -sub ssl_enabled { - return is_ssl_vconn(db_get('controller-vconn')); -} - -sub db_subst { - my ($question, $key, $value) = @_; - $question = "$debconf_owner/$question"; - my ($ret, $seen) = subst($question, $key, $value); - if ($ret && $ret != 30) { - die "Error substituting $value for $key in debconf question " - . "$question: $seen"; - } -} - -sub db_set { - my ($question, $value) = @_; - $question = "$debconf_owner/$question"; - my ($ret, $seen) = set($question, $value); - if ($ret && $ret != 30) { - die "Error setting debconf question $question to $value: $seen"; - } -} - -sub db_get { - my ($question) = @_; - $question = "$debconf_owner/$question"; - my ($ret, $seen) = get($question); - if ($ret) { - die "Error getting debconf question $question answer: $seen"; - } - return $seen; -} - -sub db_fset { - my ($question, $flag, $value) = @_; - $question = "$debconf_owner/$question"; - my ($ret, $seen) = fset($question, $flag, $value); - if ($ret && $ret != 30) { - die "Error setting debconf question $question flag $flag to $value: " - . "$seen"; - } -} - -sub db_fget { - my ($question, $flag) = @_; - $question = "$debconf_owner/$question"; - my ($ret, $seen) = fget($question, $flag); - if ($ret) { - die "Error getting debconf question $question flag $flag: $seen"; - } - return $seen; -} - -sub db_input { - my ($question) = @_; - db_fset($question, "seen", "false"); - - $question = "$debconf_owner/$question"; - my ($ret, $seen) = input('high', $question); - if ($ret && $ret != 30) { - die "Error requesting debconf question $question: $seen"; - } - return $ret; -} - -sub db_go { - my ($ret, $seen) = go(); - if (!defined($ret)) { - exit(1); # Cancel button was pushed. - } - if ($ret && $ret != 30) { - die "Error asking debconf questions: $seen"; - } - return $ret; -} - -sub run_cmd { - my ($cmd) = @_; - return if system($cmd) == 0; - - if ($? == -1) { - die "$cmd: failed to execute: $!\n"; - } elsif ($? & 127) { - die sprintf("$cmd: child died with signal %d, %s coredump\n", - ($? & 127), ($? & 128) ? 'with' : 'without'); - } else { - die sprintf("$cmd: child exited with value %d\n", $? >> 8); - } -} - -sub x509_fingerprint { - my ($file) = @_; - my $cmd = "openssl x509 -noout -in $file -fingerprint"; - open(OPENSSL, '-|', $cmd) or die "$cmd: failed to execute: $!\n"; - my $line = ; - close(OPENSSL); - my ($fingerprint) = $line =~ /SHA1 Fingerprint=(.*)/; - return $line if !defined $fingerprint; - $fingerprint =~ s/://g; - return $fingerprint; -} - -sub find_netdevs { - my ($netdev, %netdevs); - open(IFCONFIG, "/sbin/ifconfig -a|") or die "ifconfig failed: $!"; - while () { - if (my ($nd) = /^([^\s]+)/) { - $netdev = $nd; - $netdevs{$netdev} = "$netdev"; - if (my ($hwaddr) = /HWaddr (\S+)/) { - $netdevs{$netdev} .= " (MAC: $hwaddr)"; - } - } elsif (my ($ip4) = /^\s*inet addr:(\S+)/) { - $netdevs{$netdev} .= " (IP: $ip4)"; - } elsif (my ($ip6) = /^\s*inet6 addr:(\S+)/) { - $netdevs{$netdev} .= " (IPv6: $ip6)"; - } - } - foreach my $nd (keys(%netdevs)) { - delete $netdevs{$nd} if $nd eq 'lo' || $nd =~ /^wmaster/; - } - close(IFCONFIG); - return %netdevs; -} - -sub load_config { - my ($file) = @_; - - # Get the list of the variables that the shell sets automatically. - my (%auto_vars) = read_vars("set -a && env"); - - # Get the variables from $default. - my (%config) = read_vars("set -a && . '$default' && env"); - - # Subtract. - delete @config{keys %auto_vars}; - - return %config; -} - -sub read_vars { - my ($cmd) = @_; - local @ENV; - if (!open(VARS, '-|', $cmd)) { - print STDERR "$cmd: failed to execute: $!\n"; - return (); - } - my (%config); - while () { - my ($var, $value) = /^([^=]+)=(.*)$/ or next; - $config{$var} = $value; - } - close(VARS); - return %config; -} - -sub shell_escape { - local $_ = $_[0]; - if ($_ eq '') { - return '""'; - } elsif (m&^[-a-zA-Z0-9:./%^_+,]*$&) { - return $_; - } else { - s/'/'\\''/; - return "'$_'"; - } -} - -sub shell_assign { - my ($var, $value) = @_; - return $var . '=' . shell_escape($value); -} - -sub save_config { - my ($file, %config) = @_; - my (@lines); - if (open(FILE, '<', $file)) { - @lines = ; - chomp @lines; - close(FILE); - } - - # Replace all existing variable assignments. - for (my ($i) = 0; $i <= $#lines; $i++) { - local $_ = $lines[$i]; - my ($var, $value) = /^\s*([^=#]+)=(.*)$/ or next; - if (exists($config{$var})) { - $lines[$i] = shell_assign($var, $config{$var}); - delete $config{$var}; - } else { - $lines[$i] = "#$lines[$i]"; - } - } - - # Find a place to put any remaining variable assignments. - VAR: - for my $var (keys(%config)) { - my $assign = shell_assign($var, $config{$var}); - - # Replace the last commented-out variable assignment to $var, if any. - for (my ($i) = $#lines; $i >= 0; $i--) { - local $_ = $lines[$i]; - if (/^\s*#\s*$var=/) { - $lines[$i] = $assign; - next VAR; - } - } - - # Find a place to add the var: after the final commented line - # just after a line that contains "$var:". - for (my ($i) = 0; $i <= $#lines; $i++) { - if ($lines[$i] =~ /^\s*#\s*$var:/) { - for (my ($j) = $i + 1; $j <= $#lines; $j++) { - if ($lines[$j] !~ /^\s*#/) { - splice(@lines, $j, 0, $assign); - next VAR; - } - } - } - } - - # Just append it. - push(@lines, $assign); - } - - open(NEWFILE, '>', "$file.tmp") or die "$file.tmp: create: $!\n"; - print NEWFILE join('', map("$_\n", @lines)); - close(NEWFILE); - rename("$file.tmp", $file) or die "$file.tmp: rename to $file: $!\n"; -} - -sub pki_host_to_uri { - my ($pki_host) = @_; - return "http://$pki_host/openvswitch/pki"; -} - -sub kill_ovs_discover { - # Delegate this to a subprocess because there is no portable way - # to invoke fcntl(F_GETLK) from Perl. - system("ovs-kill --force $ovs_discover_pidfile"); -} - -sub netdev_names { - return map(/^(\S+)/, split(', ', db_get('netdevs'))); -} - -sub is_valid_vconn { - my ($vconn) = @_; - return scalar($vconn =~ /^(tcp|ssl):([^:]+)(:.*)?/); -} - -sub is_ssl_vconn { - my ($vconn) = @_; - return scalar($vconn =~ /^ssl:/); -} diff --git a/debian/ovs-switch-setup.8 b/debian/ovs-switch-setup.8 deleted file mode 100644 index f83377330..000000000 --- a/debian/ovs-switch-setup.8 +++ /dev/null @@ -1,41 +0,0 @@ -.TH ovs\-switch\-setup 8 "June 2008" "Open vSwitch" "Open vSwitch Manual" - -.SH NAME -ovs\-switch\-setup \- interactive setup for Open vSwitch switch - -.SH SYNOPSIS -.B ovs\-switch\-setup - -.SH DESCRIPTION -The \fBovs\-switch\-setup\fR program is an interactive program that -assists the system administrator in configuring an Open vSwitch switch, -including the underlying public key infrastructure (PKI). - -.SH OPTIONS -ovs\-switch\-setup does not accept any command-line options. - -.SH FILES -.IP /etc/default/openvswitch\-switch -Main configuration file for Open vSwitch switch. - -.IP /etc/openvswitch/cacert.pem -Default location of CA certificate for OpenFlow controllers. - -.IP /etc/openvswitch/of0\-cert.pem -Default location of certificate for the Open vSwitch switch's private key. - -.IP /etc/openvswitch/of0\-privkey.pem -Default location of the Open vSwitch switch's private key. This file -should be readable only by \fBroot\fR. - -.IP /etc/openvswitch/of0\-req.pem -Default location of certificate request for the Open vSwitch switch's -certificate. This file is not used after the signed certificate -(typically \fB/etc/openvswitch/of0\-cert.pem\fR, above) has been -obtained from the OpenFlow PKI server. - -.SH "SEE ALSO" - -.BR ovs\-dpctl (8), -.BR ovs\-pki (8), -.BR ovs\-openflowd (8) diff --git a/debian/po/POTFILES.in b/debian/po/POTFILES.in deleted file mode 100644 index 865bf94c0..000000000 --- a/debian/po/POTFILES.in +++ /dev/null @@ -1 +0,0 @@ -[type: gettext/rfc822deb] openvswitch-switch-config.templates diff --git a/debian/po/templates.pot b/debian/po/templates.pot deleted file mode 100644 index c57ed5d41..000000000 --- a/debian/po/templates.pot +++ /dev/null @@ -1,513 +0,0 @@ -# SOME DESCRIPTIVE TITLE. -# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER -# This file is distributed under the same license as the PACKAGE package. -# FIRST AUTHOR , YEAR. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: openvswitch@packages.debian.org\n" -"POT-Creation-Date: 2010-03-31 23:19-0700\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=CHARSET\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Type: multiselect -#. Choices -#: ../openvswitch-switch-config.templates:1001 -msgid "${choices}" -msgstr "" - -#. Type: multiselect -#. Description -#: ../openvswitch-switch-config.templates:1002 -msgid "Open vSwitch network devices:" -msgstr "" - -#. Type: multiselect -#. Description -#: ../openvswitch-switch-config.templates:1002 -msgid "" -"Choose the network devices that should become part of the Open vSwitch " -"instance. At least two devices must be selected for this machine to be a " -"useful switch. Unselecting all network devices will disable Open vSwitch " -"entirely." -msgstr "" - -#. Type: multiselect -#. Description -#: ../openvswitch-switch-config.templates:1002 -msgid "" -"The network devices that you select should not be configured with IP or IPv6 " -"addresses, even if the switch contacts the controller over one of the " -"selected network devices. This is because a running Open vSwitch takes over " -"network devices at a low level: they become part of the switch and cannot be " -"used for other purposes." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:2001 -msgid "No network devices were selected." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:2001 -msgid "" -"No network devices were selected for inclusion in the Open vSwitch " -"instance. The switch will be disabled." -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:3001 -msgid "Some Network Devices Have IP or IPv6 Addresses" -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:3001 -msgid "" -"The following network devices selected to be part of the Open vSwitch " -"instance have IP or IPv6 addresses configured:" -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:3001 -msgid "${configured-netdevs}" -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:3001 -msgid "" -"This is usually a mistake, even if the switch contacts the controller over " -"one of the selected network devices. This is because running Open vSwitch " -"takes over network devices at a low level: they become part of the switch " -"and cannot be used for other purposes." -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:3001 -msgid "" -"If this is an unintentional mistake, move back and fix the selection, or de-" -"configure the IP or IPv6 from these network devices." -msgstr "" - -#. Type: select -#. Choices -#: ../openvswitch-switch-config.templates:4001 -msgid "discovery, in-band, out-of-band" -msgstr "" - -#. Type: select -#. Description -#: ../openvswitch-switch-config.templates:4002 -msgid "Switch-to-controller access method:" -msgstr "" - -#. Type: select -#. Description -#: ../openvswitch-switch-config.templates:4002 -msgid "" -"Open vSwitch must be able to contact the OpenFlow controller over the " -"network. It can do so in one of three ways:" -msgstr "" - -#. Type: select -#. Description -#: ../openvswitch-switch-config.templates:4002 -msgid "" -"discovery: A single network is used for OpenFlow traffic and other data " -"traffic; that is, the switch contacts the controller over one of the network " -"devices selected as Open vSwitch network devices in the previous question. " -"The switch automatically determines the location of the controller using a " -"DHCP request with an OpenFlow-specific vendor option. This is the most " -"common case." -msgstr "" - -#. Type: select -#. Description -#: ../openvswitch-switch-config.templates:4002 -msgid "" -"in-band: As above, but the location of the controller is manually configured." -msgstr "" - -#. Type: select -#. Description -#: ../openvswitch-switch-config.templates:4002 -msgid "" -"out-of-band: OpenFlow traffic uses a network separate from the data traffic " -"that it controls. If this is the case, the control network must already be " -"configured on a network device other than one of those selected as an Open " -"vSwitch netdev in the previous question." -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:5001 -msgid "Preparing to discover controller" -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:5001 -msgid "" -"The setup program will now attempt to discover the OpenFlow controller. " -"Controller discovery may take up to 30 seconds. Please be patient." -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:5001 -msgid "" -"See ovs-openflowd(8) for instructions on how to configure a DHCP server for " -"controller discovery." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:6001 -msgid "Controller discovery failed." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:6001 -msgid "The controller's location could not be determined automatically." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:6001 -msgid "" -"Ensure that the OpenFlow DHCP server is properly configured. See ovs-" -"openflowd(8) for instructions on how to configure a DHCP server for " -"controller discovery." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:7001 -msgid "Use discovered settings?" -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:7001 -msgid "Controller discovery obtained the following settings:" -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:7001 -msgid "Controller location: ${controller-vconn}" -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:7001 -msgid "PKI URL: ${pki-uri}" -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:7001 -msgid "Please verify that these settings are correct." -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:8001 -msgid "Switch IP address:" -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:8001 -msgid "" -"For in-band communication with the controller, the Open vSwitch instance " -"must be able to determine its own IP address. Its IP address may be " -"configured statically or dynamically." -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:8001 -msgid "For static configuration, specify the switch's IP address as a string." -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:8001 -msgid "" -"For dynamic configuration with DHCP (the most common case), specify \"dhcp" -"\". Configuration with DHCP will only work reliably if the network topology " -"allows the switch to contact the DHCP server before it connects to the " -"OpenFlow controller." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:9001 -msgid "The switch IP address is invalid." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:9001 -msgid "" -"The switch IP address must specified as \"dhcp\" or a valid IP address in " -"dotted-octet form (e.g. \"1.2.3.4\")." -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:10001 -msgid "Controller location:" -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:10001 -msgid "" -"Specify how Open vSwitch should connect to the OpenFlow controller. The " -"value should be in form \"ssl:IP[:PORT]\" to connect to the controller over " -"SSL (recommended for security) or \"tcp:IP[:PORT]\" to connect over " -"cleartext TCP." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:11001 -msgid "The controller location is invalid." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:11001 -msgid "" -"The controller location must be specifed as \"ssl:IP[:PORT]\" to connect to " -"the controller over SSL (recommended for security) or \"tcp:IP[:PORT]\" to " -"connect over cleartext TCP." -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:12001 -msgid "Open vSwitch PKI server host name or URL:" -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:12001 -msgid "" -"Specify a URL to the Open vSwitch public key infrastructure (PKI). If a " -"host name or IP address is specified in place of a URL, then http:///" -"openvswitch/pki/ will be used, where is the specified host name or IP " -"address." -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:12001 -msgid "" -"The Open vSwitch PKI is usually on the same machine as the OpenFlow " -"controller." -msgstr "" - -#. Type: string -#. Description -#: ../openvswitch-switch-config.templates:12001 -msgid "" -"The setup process will connect to the Open vSwitch PKI server over HTTP, " -"using the system's configured default HTTP proxy (if any)." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:13001 -msgid "The switch CA certificate could not be retrieved." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:13001 -msgid "Retrieval of ${url} failed, with the following status: \"${error}\"." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:13001 -msgid "" -"Ensure that the Open vSwitch PKI server is correctly configured and " -"available at ${pki-uri}. If the system is configured to use an HTTP proxy, " -"also make sure that the HTTP proxy is available and that the PKI server can " -"be reached through it." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:14001 -msgid "Is ${fingerprint} the controller CA's fingerprint?" -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:14001 -msgid "" -"If a man-in-the-middle attack is possible in your network environment, check " -"that the controller CA's fingerprint is really ${fingerprint}. Answer \"true" -"\" if it matches, \"false\" if there is a discrepancy." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:14001 -msgid "" -"If a man-in-the-middle attack is not a concern, there is no need to verify " -"the fingerprint. Simply answer \"true\"." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:15001 -msgid "Send certificate request to switch CA?" -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:15001 -msgid "" -"Before it can connect to the controller over SSL, the Open vSwitch's key " -"must be signed by the switch certificate authority (CA) located on the Open " -"vSwitch PKI server, which is usually collocated with the OpenFlow " -"controller. A signing request can be sent to the PKI server now." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:15001 -msgid "" -"Answer \"true\" to send a signing request to the switch CA now. This is " -"ordinarily the correct choice. There is no harm in sending a given signing " -"request more than once." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:15001 -msgid "" -"Answer \"false\" to skip sending a signing request to the switch CA. Unless " -"the request has already been sent to the switch CA, manual sending of the " -"request and signing will be necessary." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:16001 -msgid "The certificate request could not be sent." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:16001 -msgid "Posting to ${url} failed, with the following status: \"${error}\"." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:16001 -msgid "" -"Ensure that the Open vSwitch PKI server is correctly configured and " -"available at ${pki-uri}." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:17001 -msgid "Fetch signed switch certificate from PKI server?" -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:17001 -msgid "" -"Before it can connect to the controller over SSL, the Open vSwitch's key " -"must be signed by the switch certificate authority (CA) located on the Open " -"vSwitch PKI server, which is usually collocated with the OpenFlow " -"controller." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:17001 -msgid "" -"At this point, a signing request has been sent to the switch CA (or sending " -"a request has been manually skipped), but the signed certificate has not yet " -"been retrieved. Manual action may need to be taken at the PKI server to " -"approve the signing request." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:17001 -msgid "" -"Answer \"true\" to attempt to retrieve the signed switch certificate from " -"the switch CA. If the switch certificate request has been signed at the PKI " -"server, this is the correct choice." -msgstr "" - -#. Type: boolean -#. Description -#: ../openvswitch-switch-config.templates:17001 -msgid "" -"Answer \"false\" to postpone switch configuration. The configuration " -"process must be restarted later, when the switch certificate request has " -"been signed." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:18001 -msgid "Signed switch certificate could not be retrieved." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:18001 -msgid "" -"The signed switch certificate could not be retrieved from the switch CA: " -"retrieval of ${url} failed, with the following status: \"${error}\"." -msgstr "" - -#. Type: error -#. Description -#: ../openvswitch-switch-config.templates:18001 -msgid "" -"This probably indicates that the switch's certificate request has not yet " -"been signed. If this is the problem, it may be fixed by signing the " -"certificate request at ${pki-uri}, then trying to fetch the signed switch " -"certificate again." -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:19001 -msgid "Open vSwitch Setup Finished" -msgstr "" - -#. Type: note -#. Description -#: ../openvswitch-switch-config.templates:19001 -msgid "" -"Setup of this Open vSwitch instance is finished. Complete the setup " -"procedure to enable the switch." -msgstr "" diff --git a/debian/reconfigure b/debian/reconfigure deleted file mode 100755 index dc493a188..000000000 --- a/debian/reconfigure +++ /dev/null @@ -1,128 +0,0 @@ -#! /usr/bin/perl - -use POSIX; -use strict; -use warnings; - -my $default = '/etc/default/openvswitch-switch'; - -my (%config) = load_config($default); -if (@ARGV) { - foreach my $arg (@ARGV) { - my ($key, $value) = $arg =~ /^([^=]+)=(.*)/ - or die "bad argument '$arg'\n"; - if ($value ne '') { - $config{$key} = $value; - } else { - delete $config{$key}; - } - } - save_config($default, %config); -} -print "$_=$config{$_}\n" foreach sort(keys(%config)); - -sub load_config { - my ($file) = @_; - - # Get the list of the variables that the shell sets automatically. - my (%auto_vars) = read_vars("set -a && env"); - - # Get the variables from $default. - my (%config) = read_vars("set -a && . '$default' && env"); - - # Subtract. - delete @config{keys %auto_vars}; - - return %config; -} - -sub read_vars { - my ($cmd) = @_; - local @ENV; - if (!open(VARS, '-|', $cmd)) { - print STDERR "$cmd: failed to execute: $!\n"; - return (); - } - my (%config); - while () { - my ($var, $value) = /^([^=]+)=(.*)$/ or next; - $config{$var} = $value; - } - close(VARS); - return %config; -} - -sub shell_escape { - local $_ = $_[0]; - if ($_ eq '') { - return '""'; - } elsif (m&^[-a-zA-Z0-9:./%^_+,]*$&) { - return $_; - } else { - s/'/'\\''/; - return "'$_'"; - } -} - -sub shell_assign { - my ($var, $value) = @_; - return $var . '=' . shell_escape($value); -} - -sub save_config { - my ($file, %config) = @_; - my (@lines); - if (open(FILE, '<', $file)) { - @lines = ; - chomp @lines; - close(FILE); - } - - # Replace all existing variable assignments. - for (my ($i) = 0; $i <= $#lines; $i++) { - local $_ = $lines[$i]; - my ($var, $value) = /^\s*([^=#]+)=(.*)$/ or next; - if (exists($config{$var})) { - $lines[$i] = shell_assign($var, $config{$var}); - delete $config{$var}; - } else { - $lines[$i] = "#$lines[$i]"; - } - } - - # Find a place to put any remaining variable assignments. - VAR: - for my $var (keys(%config)) { - my $assign = shell_assign($var, $config{$var}); - - # Replace the last commented-out variable assignment to $var, if any. - for (my ($i) = $#lines; $i >= 0; $i--) { - local $_ = $lines[$i]; - if (/^\s*#\s*$var=/) { - $lines[$i] = $assign; - next VAR; - } - } - - # Find a place to add the var: after the final commented line - # just after a line that contains "$var:". - for (my ($i) = 0; $i <= $#lines; $i++) { - if ($lines[$i] =~ /^\s*#\s*$var:/) { - for (my ($j) = $i + 1; $j <= $#lines; $j++) { - if ($lines[$j] !~ /^\s*#/) { - splice(@lines, $j, 0, $assign); - next VAR; - } - } - } - } - - # Just append it. - push(@lines, $assign); - } - - open(NEWFILE, '>', "$file.tmp") or die "$file.tmp: create: $!\n"; - print NEWFILE join('', map("$_\n", @lines)); - close(NEWFILE); - rename("$file.tmp", $file) or die "$file.tmp: rename to $file: $!\n"; -} diff --git a/debian/rules b/debian/rules index 913d6809d..49d562ad7 100755 --- a/debian/rules +++ b/debian/rules @@ -60,7 +60,6 @@ clean: rm -rf _debian [ ! -f Makefile ] || $(MAKE) distclean dh_clean - debconf-updatepo install: install-indep install-arch install-indep: build-indep @@ -83,7 +82,6 @@ install-arch: build-arch dh_clean -k -s dh_installdirs -s $(MAKE) -C _debian DESTDIR=$(CURDIR)/debian/openvswitch install - cp debian/openvswitch-switch-config.overrides debian/openvswitch-switch-config/usr/share/lintian/overrides/openvswitch-switch-config cp debian/openvswitch-switch.template debian/openvswitch-switch/usr/share/openvswitch/switch/default.template dh_install -s -- 2.43.0