From c9d3af4e88444768eaeb2939f1e001e239fe8660 Mon Sep 17 00:00:00 2001 From: Ben Pfaff Date: Wed, 6 Apr 2011 09:15:58 -0700 Subject: [PATCH] Update top-level documentation to bring it up to date with latest features. --- INSTALL.KVM | 2 +- INSTALL.Linux | 17 +++++++++++++++-- INSTALL.OpenFlow | 8 ++++---- README | 27 ++++++++++++++------------- 4 files changed, 34 insertions(+), 20 deletions(-) diff --git a/INSTALL.KVM b/INSTALL.KVM index 6e61f5084..09a8d67fb 100644 --- a/INSTALL.KVM +++ b/INSTALL.KVM @@ -3,7 +3,7 @@ This document describes how to use Open vSwitch with the Kernel-based Virtual Machine (KVM). This document assumes that you have read and -followed INSTALL.Linux to get Open vSwitch setup on your Linux system +followed INSTALL.Linux to get Open vSwitch setup on your Linux system. Setup ----- diff --git a/INSTALL.Linux b/INSTALL.Linux index 0d56da65d..0872922dc 100644 --- a/INSTALL.Linux +++ b/INSTALL.Linux @@ -54,6 +54,9 @@ INSTALL.userspace for more information. be compiled with IPv6 support (CONFIG_IPV6). This allows for special handling (such as path MTU discovery) of IPv6 packets. + To configure HTB or HFSC quality of service with Open vSwitch, + you must enable the respective configuration options. + To use Open vSwitch support for TAP devices, you must enable CONFIG_TUN. @@ -67,8 +70,8 @@ INSTALL.userspace for more information. infrastructure. If you are working from a Git tree or snapshot (instead of from a -distribution tarball), or if you modify the Open vSwitch build system, -you will also need the following software: +distribution tarball), or if you modify the Open vSwitch build system +or the database schema, you will also need the following software: - Autoconf version 2.64 or later. @@ -81,12 +84,22 @@ following: - pyuic4 from PyQt4 (http://www.riverbankcomputing.co.uk). +To run the unit tests, you also need: + + - Perl. Version 5.10.1 is known to work. Earlier versions should + also work. + If you modify the vswitchd database schema, then the E-R diagram in the ovs-vswitchd.conf.db(5) manpage will be updated properly only if you have the following: - "dot" from graphviz (http://www.graphviz.org/). + - Perl. Version 5.10.1 is known to work. Earlier versions should + also work. + + - Python 2.x, for x >= 4. + Installation Requirements ------------------------- diff --git a/INSTALL.OpenFlow b/INSTALL.OpenFlow index 10220f1f9..173a68833 100644 --- a/INSTALL.OpenFlow +++ b/INSTALL.OpenFlow @@ -58,10 +58,10 @@ OpenFlow switch. % insmod datapath/linux-2.6/openvswitch_mod.ko - This kernel module cannot be loaded if the Linux bridge module is - already loaded. Thus, you may need to remove any existing bridges - and unload the bridge module with "rmmod bridge" before you can do - this. + If your Linux kernel is earlier than 2.6.36, this kernel module + cannot be loaded if the Linux bridge module is already loaded. + Thus, you may need to remove any existing bridges and unload the + bridge module with "rmmod bridge" before you can do this. 3. Create a datapath instance. The command below creates a datapath identified as dp0 (see ovs-dpctl(8) for more detailed usage diff --git a/README b/README index 114878db8..8972aec09 100644 --- a/README +++ b/README @@ -6,8 +6,8 @@ What is Open vSwitch? Open vSwitch is a multilayer software switch licensed under the open source Apache 2 license. Our goal is to implement a production quality switch platform that supports standard management interfaces -(e.g. NetFlow, sFlow(R), RSPAN, ERSPAN, IOS-like CLI), and opens the -forwarding functions to programmatic extension and control. +and opens the forwarding functions to programmatic extension and +control. Open vSwitch is well suited to function as a virtual switch in VM environments. In addition to exposing standard control and visibility @@ -20,19 +20,20 @@ The bulk of the code is written in platform-independent C and is easily ported to other environments. The current release of Open vSwitch supports the following features: - * Visibility into inter-VM communication via NetFlow, sFlow, SPAN, - and RSPAN - * Standard 802.1Q VLAN model with trunking - * Per VM policing - * NIC bonding with source-MAC load balancing - * Kernel-based forwarding - * Support for OpenFlow - * Compatibility layer for the Linux bridging code + * Standard 802.1Q VLAN model with trunk and access ports + * NIC bonding with or without LACP on upstream switch + * NetFlow, sFlow(R), SPAN, RSPAN, and ERSPAN for increased visibility + * QoS (Quality of Service) configuration, plus policing + * GRE, GRE over IPSEC, and CAPWAP tunneling + * 802.1ag connectivity fault management + * OpenFlow 1.0 plus numerous extensions + * Transactional configuration database with C and Python bindings + * Compatibility layer for Linux bridging code + * High-performance forwarding using a Linux kernel module The included Linux kernel module supports Linux 2.6.18 and up, with -testing focused on 2.6.18 with Centos and Xen patches and version -2.6.26 from kernel.org. Open vSwitch also has special support for -Citrix XenServer hosts. +testing focused on 2.6.32 with Centos and Xen patches. Open vSwitch +also has special support for Citrix XenServer hosts. Open vSwitch can also operate, at a cost in performance, entirely in userspace, without assistance from a kernel module. This userspace -- 2.43.0