1 Open vSwitch <http://openvswitch.org>
3 Frequently Asked Questions
4 ==========================
9 Q: What is Open vSwitch?
11 A: Open vSwitch is a production quality open source software switch
12 designed to be used as a vswitch in virtualized server
13 environments. A vswitch forwards traffic between different VMs on
14 the same physical host and also forwards traffic between VMs and
15 the physical network. Open vSwitch supports standard management
16 interfaces (e.g. sFlow, NetFlow, IPFIX, RSPAN, CLI), and is open to
17 programmatic extension and control using OpenFlow and the OVSDB
20 Open vSwitch as designed to be compatible with modern switching
21 chipsets. This means that it can be ported to existing high-fanout
22 switches allowing the same flexible control of the physical
23 infrastructure as the virtual infrastructure. It also means that
24 Open vSwitch will be able to take advantage of on-NIC switching
25 chipsets as their functionality matures.
27 Q: What virtualization platforms can use Open vSwitch?
29 A: Open vSwitch can currently run on any Linux-based virtualization
30 platform (kernel 2.6.32 and newer), including: KVM, VirtualBox, Xen,
31 Xen Cloud Platform, XenServer. As of Linux 3.3 it is part of the
32 mainline kernel. The bulk of the code is written in platform-
33 independent C and is easily ported to other environments. We welcome
34 inquires about integrating Open vSwitch with other virtualization
37 Q: How can I try Open vSwitch?
39 A: The Open vSwitch source code can be built on a Linux system. You can
40 build and experiment with Open vSwitch on any Linux machine.
41 Packages for various Linux distributions are available on many
42 platforms, including: Debian, Ubuntu, Fedora.
44 You may also download and run a virtualization platform that already
45 has Open vSwitch integrated. For example, download a recent ISO for
46 XenServer or Xen Cloud Platform. Be aware that the version
47 integrated with a particular platform may not be the most recent Open
50 Q: Does Open vSwitch only work on Linux?
52 A: No, Open vSwitch has been ported to a number of different operating
53 systems and hardware platforms. Most of the development work occurs
54 on Linux, but the code should be portable to any POSIX system. We've
55 seen Open vSwitch ported to a number of different platforms,
56 including FreeBSD, Windows, and even non-POSIX embedded systems.
58 By definition, the Open vSwitch Linux kernel module only works on
59 Linux and will provide the highest performance. However, a userspace
60 datapath is available that should be very portable.
62 Q: What's involved with porting Open vSwitch to a new platform or
65 A: The PORTING document describes how one would go about porting Open
66 vSwitch to a new operating system or hardware platform.
68 Q: Why would I use Open vSwitch instead of the Linux bridge?
70 A: Open vSwitch is specially designed to make it easier to manage VM
71 network configuration and monitor state spread across many physical
72 hosts in dynamic virtualized environments. Please see WHY-OVS for a
73 more detailed description of how Open vSwitch relates to the Linux
76 Q: How is Open vSwitch related to distributed virtual switches like the
77 VMware vNetwork distributed switch or the Cisco Nexus 1000V?
79 A: Distributed vswitch applications (e.g., VMware vNetwork distributed
80 switch, Cisco Nexus 1000V) provide a centralized way to configure and
81 monitor the network state of VMs that are spread across many physical
82 hosts. Open vSwitch is not a distributed vswitch itself, rather it
83 runs on each physical host and supports remote management in a way
84 that makes it easier for developers of virtualization/cloud
85 management platforms to offer distributed vswitch capabilities.
87 To aid in distribution, Open vSwitch provides two open protocols that
88 are specially designed for remote management in virtualized network
89 environments: OpenFlow, which exposes flow-based forwarding state,
90 and the OVSDB management protocol, which exposes switch port state.
91 In addition to the switch implementation itself, Open vSwitch
92 includes tools (ovs-controller, ovs-ofctl, ovs-vsctl) that developers
93 can script and extend to provide distributed vswitch capabilities
94 that are closely integrated with their virtualization management
97 Q: Why doesn't Open vSwitch support distribution?
99 A: Open vSwitch is intended to be a useful component for building
100 flexible network infrastructure. There are many different approaches
101 to distribution which balance trade-offs between simplicity,
102 scalability, hardware compatibility, convergence times, logical
103 forwarding model, etc. The goal of Open vSwitch is to be able to
104 support all as a primitive building block rather than choose a
105 particular point in the distributed design space.
107 Q: How can I contribute to the Open vSwitch Community?
109 A: You can start by joining the mailing lists and helping to answer
110 questions. You can also suggest improvements to documentation. If
111 you have a feature or bug you would like to work on, send a mail to
112 one of the mailing lists:
114 http://openvswitch.org/mlists/
120 Q: What does it mean for an Open vSwitch release to be LTS (long-term
123 A: All official releases have been through a comprehensive testing
124 process and are suitable for production use. Planned releases will
125 occur several times a year. If a significant bug is identified in an
126 LTS release, we will provide an updated release that includes the
127 fix. Releases that are not LTS may not be fixed and may just be
128 supplanted by the next major release. The current LTS release is
131 Q: What Linux kernel versions does each Open vSwitch release work with?
133 A: The following table lists the Linux kernel versions against which the
134 given versions of the Open vSwitch kernel module will successfully
135 build. The Linux kernel versions are upstream kernel versions, so
136 Linux kernels modified from the upstream sources may not build in
137 some cases even if they are based on a supported version. This is
138 most notably true of Red Hat Enterprise Linux (RHEL) kernels, which
139 are extensively modified from upstream.
141 Open vSwitch Linux kernel
142 ------------ -------------
153 Open vSwitch userspace should also work with the Linux kernel module
154 built into Linux 3.3 and later.
156 Open vSwitch userspace is not sensitive to the Linux kernel version.
157 It should build against almost any kernel, certainly against 2.6.32
160 Q: What Linux kernel versions does IPFIX flow monitoring work with?
162 A: IPFIX flow monitoring requires the Linux kernel module from Open
163 vSwitch version 1.10.90 or later.
165 Q: Should userspace or kernel be upgraded first to minimize downtime?
167 In general, the Open vSwitch userspace should be used with the
168 kernel version included in the same release or with the version
169 from upstream Linux. However, when upgrading between two releases
170 of Open vSwitch it is best to migrate userspace first to reduce
171 the possbility of incompatibilities.
173 Q: What features are not available in the Open vSwitch kernel datapath
174 that ships as part of the upstream Linux kernel?
176 A: The kernel module in upstream Linux 3.3 and later does not include
177 tunnel virtual ports, that is, interfaces with type "gre",
178 "ipsec_gre", "gre64", "ipsec_gre64", "vxlan", or "lisp". It is
179 possible to create tunnels in Linux and attach them to Open vSwitch
180 as system devices. However, they cannot be dynamically created
181 through the OVSDB protocol or set the tunnel ids as a flow action.
183 Work is in progress in adding tunnel virtual ports to the upstream
184 Linux version of the Open vSwitch kernel module. For now, if you
185 need these features, use the kernel module from the Open vSwitch
186 distribution instead of the upstream Linux kernel module.
188 The upstream kernel module does not include patch ports, but this
189 only matters for Open vSwitch 1.9 and earlier, because Open vSwitch
190 1.10 and later implement patch ports without using this kernel
193 Q: What features are not available when using the userspace datapath?
195 A: Tunnel virtual ports are not supported, as described in the
196 previous answer. It is also not possible to use queue-related
197 actions. On Linux kernels before 2.6.39, maximum-sized VLAN packets
198 may not be transmitted.
204 Q: I thought Open vSwitch was a virtual Ethernet switch, but the
205 documentation keeps talking about bridges. What's a bridge?
207 A: In networking, the terms "bridge" and "switch" are synonyms. Open
208 vSwitch implements an Ethernet switch, which means that it is also
213 A: See the "VLAN" section below.
219 Q: How do I configure a port as an access port?
221 A: Add "tag=VLAN" to your "ovs-vsctl add-port" command. For example,
222 the following commands configure br0 with eth0 as a trunk port (the
223 default) and tap0 as an access port for VLAN 9:
226 ovs-vsctl add-port br0 eth0
227 ovs-vsctl add-port br0 tap0 tag=9
229 If you want to configure an already added port as an access port,
230 use "ovs-vsctl set", e.g.:
232 ovs-vsctl set port tap0 tag=9
234 Q: How do I configure a port as a SPAN port, that is, enable mirroring
235 of all traffic to that port?
237 A: The following commands configure br0 with eth0 and tap0 as trunk
238 ports. All traffic coming in or going out on eth0 or tap0 is also
239 mirrored to tap1; any traffic arriving on tap1 is dropped:
242 ovs-vsctl add-port br0 eth0
243 ovs-vsctl add-port br0 tap0
244 ovs-vsctl add-port br0 tap1 \
245 -- --id=@p get port tap1 \
246 -- --id=@m create mirror name=m0 select-all=true output-port=@p \
247 -- set bridge br0 mirrors=@m
249 To later disable mirroring, run:
251 ovs-vsctl clear bridge br0 mirrors
253 Q: Does Open vSwitch support configuring a port in promiscuous mode?
255 A: Yes. How you configure it depends on what you mean by "promiscuous
258 - Conventionally, "promiscuous mode" is a feature of a network
259 interface card. Ordinarily, a NIC passes to the CPU only the
260 packets actually destined to its host machine. It discards
261 the rest to avoid wasting memory and CPU cycles. When
262 promiscuous mode is enabled, however, it passes every packet
263 to the CPU. On an old-style shared-media or hub-based
264 network, this allows the host to spy on all packets on the
265 network. But in the switched networks that are almost
266 everywhere these days, promiscuous mode doesn't have much
267 effect, because few packets not destined to a host are
268 delivered to the host's NIC.
270 This form of promiscuous mode is configured in the guest OS of
271 the VMs on your bridge, e.g. with "ifconfig".
273 - The VMware vSwitch uses a different definition of "promiscuous
274 mode". When you configure promiscuous mode on a VMware vNIC,
275 the vSwitch sends a copy of every packet received by the
276 vSwitch to that vNIC. That has a much bigger effect than just
277 enabling promiscuous mode in a guest OS. Rather than getting
278 a few stray packets for which the switch does not yet know the
279 correct destination, the vNIC gets every packet. The effect
280 is similar to replacing the vSwitch by a virtual hub.
282 This "promiscuous mode" is what switches normally call "port
283 mirroring" or "SPAN". For information on how to configure
284 SPAN, see "How do I configure a port as a SPAN port, that is,
285 enable mirroring of all traffic to that port?"
287 Q: How do I configure a VLAN as an RSPAN VLAN, that is, enable
288 mirroring of all traffic to that VLAN?
290 A: The following commands configure br0 with eth0 as a trunk port and
291 tap0 as an access port for VLAN 10. All traffic coming in or going
292 out on tap0, as well as traffic coming in or going out on eth0 in
293 VLAN 10, is also mirrored to VLAN 15 on eth0. The original tag for
294 VLAN 10, in cases where one is present, is dropped as part of
298 ovs-vsctl add-port br0 eth0
299 ovs-vsctl add-port br0 tap0 tag=10
301 -- --id=@m create mirror name=m0 select-all=true select-vlan=10 \
303 -- set bridge br0 mirrors=@m
305 To later disable mirroring, run:
307 ovs-vsctl clear bridge br0 mirrors
309 Mirroring to a VLAN can disrupt a network that contains unmanaged
310 switches. See ovs-vswitchd.conf.db(5) for details. Mirroring to a
311 GRE tunnel has fewer caveats than mirroring to a VLAN and should
312 generally be preferred.
314 Q: Can I mirror more than one input VLAN to an RSPAN VLAN?
316 A: Yes, but mirroring to a VLAN strips the original VLAN tag in favor
317 of the specified output-vlan. This loss of information may make
318 the mirrored traffic too hard to interpret.
320 To mirror multiple VLANs, use the commands above, but specify a
321 comma-separated list of VLANs as the value for select-vlan. To
322 mirror every VLAN, use the commands above, but omit select-vlan and
325 When a packet arrives on a VLAN that is used as a mirror output
326 VLAN, the mirror is disregarded. Instead, in standalone mode, OVS
327 floods the packet across all the ports for which the mirror output
328 VLAN is configured. (If an OpenFlow controller is in use, then it
329 can override this behavior through the flow table.) If OVS is used
330 as an intermediate switch, rather than an edge switch, this ensures
331 that the RSPAN traffic is distributed through the network.
333 Mirroring to a VLAN can disrupt a network that contains unmanaged
334 switches. See ovs-vswitchd.conf.db(5) for details. Mirroring to a
335 GRE tunnel has fewer caveats than mirroring to a VLAN and should
336 generally be preferred.
338 Q: How do I configure mirroring of all traffic to a GRE tunnel?
340 A: The following commands configure br0 with eth0 and tap0 as trunk
341 ports. All traffic coming in or going out on eth0 or tap0 is also
342 mirrored to gre0, a GRE tunnel to the remote host 192.168.1.10; any
343 traffic arriving on gre0 is dropped:
346 ovs-vsctl add-port br0 eth0
347 ovs-vsctl add-port br0 tap0
348 ovs-vsctl add-port br0 gre0 \
349 -- set interface gre0 type=gre options:remote_ip=192.168.1.10 \
350 -- --id=@p get port gre0 \
351 -- --id=@m create mirror name=m0 select-all=true output-port=@p \
352 -- set bridge br0 mirrors=@m
354 To later disable mirroring and destroy the GRE tunnel:
356 ovs-vsctl clear bridge br0 mirrors
357 ovs-vcstl del-port br0 gre0
359 Q: Does Open vSwitch support ERSPAN?
361 A: No. ERSPAN is an undocumented proprietary protocol. As an
362 alternative, Open vSwitch supports mirroring to a GRE tunnel (see
365 Q: How do I connect two bridges?
367 A: First, why do you want to do this? Two connected bridges are not
368 much different from a single bridge, so you might as well just have
369 a single bridge with all your ports on it.
371 If you still want to connect two bridges, you can use a pair of
372 patch ports. The following example creates bridges br0 and br1,
373 adds eth0 and tap0 to br0, adds tap1 to br1, and then connects br0
374 and br1 with a pair of patch ports.
377 ovs-vsctl add-port br0 eth0
378 ovs-vsctl add-port br0 tap0
380 ovs-vsctl add-port br1 tap1
382 -- add-port br0 patch0 \
383 -- set interface patch0 type=patch options:peer=patch1 \
384 -- add-port br1 patch1 \
385 -- set interface patch1 type=patch options:peer=patch0
387 Bridges connected with patch ports are much like a single bridge.
388 For instance, if the example above also added eth1 to br1, and both
389 eth0 and eth1 happened to be connected to the same next-hop switch,
390 then you could loop your network just as you would if you added
391 eth0 and eth1 to the same bridge (see the "Configuration Problems"
392 section below for more information).
394 If you are using Open vSwitch 1.9 or an earlier version, then you
395 need to be using the kernel module bundled with Open vSwitch rather
396 than the one that is integrated into Linux 3.3 and later, because
397 Open vSwitch 1.9 and earlier versions need kernel support for patch
398 ports. This also means that in Open vSwitch 1.9 and earlier, patch
399 ports will not work with the userspace datapath, only with the
402 Q: Why are there so many different ways to dump flows?
404 A: Open vSwitch uses different kinds of flows for different purposes:
406 - OpenFlow flows are the most important kind of flow. OpenFlow
407 controllers use these flows to define a switch's policy.
408 OpenFlow flows support wildcards, priorities, and multiple
411 When in-band control is in use, Open vSwitch sets up a few
412 "hidden" flows, with priority higher than a controller or the
413 user can configure, that are not visible via OpenFlow. (See
414 the "Controller" section of the FAQ for more information
417 - The Open vSwitch software switch implementation uses a second
418 kind of flow internally. These flows, called "exact-match"
419 or "datapath" or "kernel" flows, do not support wildcards or
420 priorities and comprise only a single table, which makes them
421 suitable for caching. OpenFlow flows and exact-match flows
422 also support different actions and number ports differently.
424 Exact-match flows are an implementation detail that is
425 subject to change in future versions of Open vSwitch. Even
426 with the current version of Open vSwitch, hardware switch
427 implementations do not necessarily use exact-match flows.
429 Each of the commands for dumping flows has a different purpose:
431 - "ovs-ofctl dump-flows <br>" dumps OpenFlow flows, excluding
432 hidden flows. This is the most commonly useful form of flow
433 dump. (Unlike the other commands, this should work with any
434 OpenFlow switch, not just Open vSwitch.)
436 - "ovs-appctl bridge/dump-flows <br>" dumps OpenFlow flows,
437 including hidden flows. This is occasionally useful for
438 troubleshooting suspected issues with in-band control.
440 - "ovs-dpctl dump-flows [dp]" dumps the exact-match flow table
441 entries for a Linux kernel-based datapath. In Open vSwitch
442 1.10 and later, ovs-vswitchd merges multiple switches into a
443 single datapath, so it will show all the flows on all your
444 kernel-based switches. This command can occasionally be
445 useful for debugging.
447 - "ovs-appctl dpif/dump-flows <br>", new in Open vSwitch 1.10,
448 dumps exact-match flows for only the specified bridge,
449 regardless of the type.
452 Configuration Problems
453 ----------------------
455 Q: I created a bridge and added my Ethernet port to it, using commands
459 ovs-vsctl add-port br0 eth0
461 and as soon as I ran the "add-port" command I lost all connectivity
464 A: A physical Ethernet device that is part of an Open vSwitch bridge
465 should not have an IP address. If one does, then that IP address
466 will not be fully functional.
468 You can restore functionality by moving the IP address to an Open
469 vSwitch "internal" device, such as the network device named after
470 the bridge itself. For example, assuming that eth0's IP address is
471 192.168.128.5, you could run the commands below to fix up the
474 ifconfig eth0 0.0.0.0
475 ifconfig br0 192.168.128.5
477 (If your only connection to the machine running OVS is through the
478 IP address in question, then you would want to run all of these
479 commands on a single command line, or put them into a script.) If
480 there were any additional routes assigned to eth0, then you would
481 also want to use commands to adjust these routes to go through br0.
483 If you use DHCP to obtain an IP address, then you should kill the
484 DHCP client that was listening on the physical Ethernet interface
485 (e.g. eth0) and start one listening on the internal interface
486 (e.g. br0). You might still need to manually clear the IP address
487 from the physical interface (e.g. with "ifconfig eth0 0.0.0.0").
489 There is no compelling reason why Open vSwitch must work this way.
490 However, this is the way that the Linux kernel bridge module has
491 always worked, so it's a model that those accustomed to Linux
492 bridging are already used to. Also, the model that most people
493 expect is not implementable without kernel changes on all the
494 versions of Linux that Open vSwitch supports.
496 By the way, this issue is not specific to physical Ethernet
497 devices. It applies to all network devices except Open vswitch
500 Q: I created a bridge and added a couple of Ethernet ports to it,
501 using commands like these:
504 ovs-vsctl add-port br0 eth0
505 ovs-vsctl add-port br0 eth1
507 and now my network seems to have melted: connectivity is unreliable
508 (even connectivity that doesn't go through Open vSwitch), all the
509 LEDs on my physical switches are blinking, wireshark shows
510 duplicated packets, and CPU usage is very high.
512 A: More than likely, you've looped your network. Probably, eth0 and
513 eth1 are connected to the same physical Ethernet switch. This
514 yields a scenario where OVS receives a broadcast packet on eth0 and
515 sends it out on eth1, then the physical switch connected to eth1
516 sends the packet back on eth0, and so on forever. More complicated
517 scenarios, involving a loop through multiple switches, are possible
520 The solution depends on what you are trying to do:
522 - If you added eth0 and eth1 to get higher bandwidth or higher
523 reliability between OVS and your physical Ethernet switch,
524 use a bond. The following commands create br0 and then add
525 eth0 and eth1 as a bond:
528 ovs-vsctl add-bond br0 bond0 eth0 eth1
530 Bonds have tons of configuration options. Please read the
531 documentation on the Port table in ovs-vswitchd.conf.db(5)
534 - Perhaps you don't actually need eth0 and eth1 to be on the
535 same bridge. For example, if you simply want to be able to
536 connect each of them to virtual machines, then you can put
537 each of them on a bridge of its own:
540 ovs-vsctl add-port br0 eth0
543 ovs-vsctl add-port br1 eth1
545 and then connect VMs to br0 and br1. (A potential
546 disadvantage is that traffic cannot directly pass between br0
547 and br1. Instead, it will go out eth0 and come back in eth1,
550 - If you have a redundant or complex network topology and you
551 want to prevent loops, turn on spanning tree protocol (STP).
552 The following commands create br0, enable STP, and add eth0
553 and eth1 to the bridge. The order is important because you
554 don't want have to have a loop in your network even
558 ovs-vsctl set bridge br0 stp_enable=true
559 ovs-vsctl add-port br0 eth0
560 ovs-vsctl add-port br0 eth1
562 The Open vSwitch implementation of STP is not well tested.
563 Please report any bugs you observe, but if you'd rather avoid
564 acting as a beta tester then another option might be your
567 Q: I can't seem to use Open vSwitch in a wireless network.
569 A: Wireless base stations generally only allow packets with the source
570 MAC address of NIC that completed the initial handshake.
571 Therefore, without MAC rewriting, only a single device can
572 communicate over a single wireless link.
574 This isn't specific to Open vSwitch, it's enforced by the access
575 point, so the same problems will show up with the Linux bridge or
576 any other way to do bridging.
578 Q: I can't seem to add my PPP interface to an Open vSwitch bridge.
580 A: PPP most commonly carries IP packets, but Open vSwitch works only
581 with Ethernet frames. The correct way to interface PPP to an
582 Ethernet network is usually to use routing instead of switching.
584 Q: Is there any documentation on the database tables and fields?
586 A: Yes. ovs-vswitchd.conf.db(5) is a comprehensive reference.
588 Q: When I run ovs-dpctl I no longer see the bridges I created. Instead,
589 I only see a datapath called "ovs-system". How can I see datapath
590 information about a particular bridge?
592 A: In version 1.9.0, OVS switched to using a single datapath that is
593 shared by all bridges of that type. The "ovs-appctl dpif/*"
594 commands provide similar functionality that is scoped by the bridge.
597 Quality of Service (QoS)
598 ------------------------
600 Q: How do I configure Quality of Service (QoS)?
602 A: Suppose that you want to set up bridge br0 connected to physical
603 Ethernet port eth0 (a 1 Gbps device) and virtual machine interfaces
604 vif1.0 and vif2.0, and that you want to limit traffic from vif1.0
605 to eth0 to 10 Mbps and from vif2.0 to eth0 to 20 Mbps. Then, you
606 could configure the bridge this way:
610 add-port br0 eth0 -- \
611 add-port br0 vif1.0 -- set interface vif1.0 ofport_request=5 -- \
612 add-port br0 vif2.0 -- set interface vif2.0 ofport_request=6 -- \
613 set port eth0 qos=@newqos -- \
614 --id=@newqos create qos type=linux-htb \
615 other-config:max-rate=1000000000 \
616 queues:123=@vif10queue \
617 queues:234=@vif20queue -- \
618 --id=@vif10queue create queue other-config:max-rate=10000000 -- \
619 --id=@vif20queue create queue other-config:max-rate=20000000
621 At this point, bridge br0 is configured with the ports and eth0 is
622 configured with the queues that you need for QoS, but nothing is
623 actually directing packets from vif1.0 or vif2.0 to the queues that
624 we have set up for them. That means that all of the packets to
625 eth0 are going to the "default queue", which is not what we want.
627 We use OpenFlow to direct packets from vif1.0 and vif2.0 to the
628 queues reserved for them:
630 ovs-ofctl add-flow br0 in_port=5,actions=set_queue:123,normal
631 ovs-ofctl add-flow br0 in_port=6,actions=set_queue:234,normal
633 Each of the above flows matches on the input port, sets up the
634 appropriate queue (123 for vif1.0, 234 for vif2.0), and then
635 executes the "normal" action, which performs the same switching
636 that Open vSwitch would have done without any OpenFlow flows being
637 present. (We know that vif1.0 and vif2.0 have OpenFlow port
638 numbers 5 and 6, respectively, because we set their ofport_request
639 columns above. If we had not done that, then we would have needed
640 to find out their port numbers before setting up these flows.)
642 Now traffic going from vif1.0 or vif2.0 to eth0 should be
645 By the way, if you delete the bridge created by the above commands,
650 then that will leave one unreferenced QoS record and two
651 unreferenced Queue records in the Open vSwich database. One way to
652 clear them out, assuming you don't have other QoS or Queue records
653 that you want to keep, is:
655 ovs-vsctl -- --all destroy QoS -- --all destroy Queue
657 If you do want to keep some QoS or Queue records, or the Open
658 vSwitch you are using is older than version 1.8 (which added the
659 --all option), then you will have to destroy QoS and Queue records
662 Q: I configured Quality of Service (QoS) in my OpenFlow network by
663 adding records to the QoS and Queue table, but the results aren't
666 A: Did you install OpenFlow flows that use your queues? This is the
667 primary way to tell Open vSwitch which queues you want to use. If
668 you don't do this, then the default queue will be used, which will
669 probably not have the effect you want.
671 Refer to the previous question for an example.
673 Q: I configured QoS, correctly, but my measurements show that it isn't
674 working as well as I expect.
676 A: With the Linux kernel, the Open vSwitch implementation of QoS has
679 - Open vSwitch configures a subset of Linux kernel QoS
680 features, according to what is in OVSDB. It is possible that
681 this code has bugs. If you believe that this is so, then you
682 can configure the Linux traffic control (QoS) stack directly
683 with the "tc" program. If you get better results that way,
684 you can send a detailed bug report to bugs@openvswitch.org.
686 It is certain that Open vSwitch cannot configure every Linux
687 kernel QoS feature. If you need some feature that OVS cannot
688 configure, then you can also use "tc" directly (or add that
691 - The Open vSwitch implementation of OpenFlow allows flows to
692 be directed to particular queues. This is pretty simple and
693 unlikely to have serious bugs at this point.
695 However, most problems with QoS on Linux are not bugs in Open
696 vSwitch at all. They tend to be either configuration errors
697 (please see the earlier questions in this section) or issues with
698 the traffic control (QoS) stack in Linux. The Open vSwitch
699 developers are not experts on Linux traffic control. We suggest
700 that, if you believe you are encountering a problem with Linux
701 traffic control, that you consult the tc manpages (e.g. tc(8),
702 tc-htb(8), tc-hfsc(8)), web resources (e.g. http://lartc.org/), or
703 mailing lists (e.g. http://vger.kernel.org/vger-lists.html#netdev).
711 A: At the simplest level, a VLAN (short for "virtual LAN") is a way to
712 partition a single switch into multiple switches. Suppose, for
713 example, that you have two groups of machines, group A and group B.
714 You want the machines in group A to be able to talk to each other,
715 and you want the machine in group B to be able to talk to each
716 other, but you don't want the machines in group A to be able to
717 talk to the machines in group B. You can do this with two
718 switches, by plugging the machines in group A into one switch and
719 the machines in group B into the other switch.
721 If you only have one switch, then you can use VLANs to do the same
722 thing, by configuring the ports for machines in group A as VLAN
723 "access ports" for one VLAN and the ports for group B as "access
724 ports" for a different VLAN. The switch will only forward packets
725 between ports that are assigned to the same VLAN, so this
726 effectively subdivides your single switch into two independent
727 switches, one for each group of machines.
729 So far we haven't said anything about VLAN headers. With access
730 ports, like we've described so far, no VLAN header is present in
731 the Ethernet frame. This means that the machines (or switches)
732 connected to access ports need not be aware that VLANs are
733 involved, just like in the case where we use two different physical
736 Now suppose that you have a whole bunch of switches in your
737 network, instead of just one, and that some machines in group A are
738 connected directly to both switches 1 and 2. To allow these
739 machines to talk to each other, you could add an access port for
740 group A's VLAN to switch 1 and another to switch 2, and then
741 connect an Ethernet cable between those ports. That works fine,
742 but it doesn't scale well as the number of switches and the number
743 of VLANs increases, because you use up a lot of valuable switch
744 ports just connecting together your VLANs.
746 This is where VLAN headers come in. Instead of using one cable and
747 two ports per VLAN to connect a pair of switches, we configure a
748 port on each switch as a VLAN "trunk port". Packets sent and
749 received on a trunk port carry a VLAN header that says what VLAN
750 the packet belongs to, so that only two ports total are required to
751 connect the switches, regardless of the number of VLANs in use.
752 Normally, only switches (either physical or virtual) are connected
753 to a trunk port, not individual hosts, because individual hosts
754 don't expect to see a VLAN header in the traffic that they receive.
756 None of the above discussion says anything about particular VLAN
757 numbers. This is because VLAN numbers are completely arbitrary.
758 One must only ensure that a given VLAN is numbered consistently
759 throughout a network and that different VLANs are given different
760 numbers. (That said, VLAN 0 is usually synonymous with a packet
761 that has no VLAN header, and VLAN 4095 is reserved.)
765 A: Many drivers in Linux kernels before version 3.3 had VLAN-related
766 bugs. If you are having problems with VLANs that you suspect to be
767 driver related, then you have several options:
769 - Upgrade to Linux 3.3 or later.
771 - Build and install a fixed version of the particular driver
772 that is causing trouble, if one is available.
774 - Use a NIC whose driver does not have VLAN problems.
776 - Use "VLAN splinters", a feature in Open vSwitch 1.4 and later
777 that works around bugs in kernel drivers. To enable VLAN
778 splinters on interface eth0, use the command:
780 ovs-vsctl set interface eth0 other-config:enable-vlan-splinters=true
782 For VLAN splinters to be effective, Open vSwitch must know
783 which VLANs are in use. See the "VLAN splinters" section in
784 the Interface table in ovs-vswitchd.conf.db(5) for details on
785 how Open vSwitch infers in-use VLANs.
787 VLAN splinters increase memory use and reduce performance, so
788 use them only if needed.
790 - Apply the "vlan workaround" patch from the XenServer kernel
791 patch queue, build Open vSwitch against this patched kernel,
792 and then use ovs-vlan-bug-workaround(8) to enable the VLAN
793 workaround for each interface whose driver is buggy.
795 (This is a nontrivial exercise, so this option is included
796 only for completeness.)
798 It is not always easy to tell whether a Linux kernel driver has
799 buggy VLAN support. The ovs-vlan-test(8) and ovs-test(8) utilities
800 can help you test. See their manpages for details. Of the two
801 utilities, ovs-test(8) is newer and more thorough, but
802 ovs-vlan-test(8) may be easier to use.
804 Q: VLANs still don't work. I've tested the driver so I know that it's OK.
806 A: Do you have VLANs enabled on the physical switch that OVS is
807 attached to? Make sure that the port is configured to trunk the
808 VLAN or VLANs that you are using with OVS.
810 Q: Outgoing VLAN-tagged traffic goes through OVS to my physical switch
811 and to its destination host, but OVS seems to drop incoming return
814 A: It's possible that you have the VLAN configured on your physical
815 switch as the "native" VLAN. In this mode, the switch treats
816 incoming packets either tagged with the native VLAN or untagged as
817 part of the native VLAN. It may also send outgoing packets in the
818 native VLAN without a VLAN tag.
820 If this is the case, you have two choices:
822 - Change the physical switch port configuration to tag packets
823 it forwards to OVS with the native VLAN instead of forwarding
826 - Change the OVS configuration for the physical port to a
827 native VLAN mode. For example, the following sets up a
828 bridge with port eth0 in "native-tagged" mode in VLAN 9:
831 ovs-vsctl add-port br0 eth0 tag=9 vlan_mode=native-tagged
833 In this situation, "native-untagged" mode will probably work
834 equally well. Refer to the documentation for the Port table
835 in ovs-vswitchd.conf.db(5) for more information.
837 Q: I added a pair of VMs on different VLANs, like this:
840 ovs-vsctl add-port br0 eth0
841 ovs-vsctl add-port br0 tap0 tag=9
842 ovs-vsctl add-port br0 tap1 tag=10
844 but the VMs can't access each other, the external network, or the
847 A: It is to be expected that the VMs can't access each other. VLANs
848 are a means to partition a network. When you configured tap0 and
849 tap1 as access ports for different VLANs, you indicated that they
850 should be isolated from each other.
852 As for the external network and the Internet, it seems likely that
853 the machines you are trying to access are not on VLAN 9 (or 10) and
854 that the Internet is not available on VLAN 9 (or 10).
856 Q: I added a pair of VMs on the same VLAN, like this:
859 ovs-vsctl add-port br0 eth0
860 ovs-vsctl add-port br0 tap0 tag=9
861 ovs-vsctl add-port br0 tap1 tag=9
863 The VMs can access each other, but not the external network or the
866 A: It seems likely that the machines you are trying to access in the
867 external network are not on VLAN 9 and that the Internet is not
868 available on VLAN 9. Also, ensure VLAN 9 is set up as an allowed
869 trunk VLAN on the upstream switch port to which eth0 is connected.
871 Q: Can I configure an IP address on a VLAN?
873 A: Yes. Use an "internal port" configured as an access port. For
874 example, the following configures IP address 192.168.0.7 on VLAN 9.
875 That is, OVS will forward packets from eth0 to 192.168.0.7 only if
876 they have an 802.1Q header with VLAN 9. Conversely, traffic
877 forwarded from 192.168.0.7 to eth0 will be tagged with an 802.1Q
881 ovs-vsctl add-port br0 eth0
882 ovs-vsctl add-port br0 vlan9 tag=9 -- set interface vlan9 type=internal
883 ifconfig vlan9 192.168.0.7
885 Q: My OpenFlow controller doesn't see the VLANs that I expect.
887 A: The configuration for VLANs in the Open vSwitch database (e.g. via
888 ovs-vsctl) only affects traffic that goes through Open vSwitch's
889 implementation of the OpenFlow "normal switching" action. By
890 default, when Open vSwitch isn't connected to a controller and
891 nothing has been manually configured in the flow table, all traffic
892 goes through the "normal switching" action. But, if you set up
893 OpenFlow flows on your own, through a controller or using ovs-ofctl
894 or through other means, then you have to implement VLAN handling
897 You can use "normal switching" as a component of your OpenFlow
898 actions, e.g. by putting "normal" into the lists of actions on
899 ovs-ofctl or by outputting to OFPP_NORMAL from an OpenFlow
900 controller. In situations where this is not suitable, you can
901 implement VLAN handling yourself, e.g.:
903 - If a packet comes in on an access port, and the flow table
904 needs to send it out on a trunk port, then the flow can add
905 the appropriate VLAN tag with the "mod_vlan_vid" action.
907 - If a packet comes in on a trunk port, and the flow table
908 needs to send it out on an access port, then the flow can
909 strip the VLAN tag with the "strip_vlan" action.
911 Q: I configured ports on a bridge as access ports with different VLAN
915 ovs-vsctl set-controller br0 tcp:192.168.0.10:6633
916 ovs-vsctl add-port br0 eth0
917 ovs-vsctl add-port br0 tap0 tag=9
918 ovs-vsctl add-port br0 tap1 tag=10
920 but the VMs running behind tap0 and tap1 can still communicate,
921 that is, they are not isolated from each other even though they are
924 A: Do you have a controller configured on br0 (as the commands above
925 do)? If so, then this is a variant on the previous question, "My
926 OpenFlow controller doesn't see the VLANs that I expect," and you
927 can refer to the answer there for more information.
935 A: VXLAN stands for Virtual eXtensible Local Area Network, and is a means
936 to solve the scaling challenges of VLAN networks in a multi-tenant
937 environment. VXLAN is an overlay network which transports an L2 network
938 over an existing L3 network. For more information on VXLAN, please see
939 the IETF draft available here:
941 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03
943 Q: How much of the VXLAN protocol does Open vSwitch currently support?
945 A: Open vSwitch currently supports the framing format for packets on the
946 wire. There is currently no support for the multicast aspects of VXLAN.
947 To get around the lack of multicast support, it is possible to
948 pre-provision MAC to IP address mappings either manually or from a
951 Q: What destination UDP port does the VXLAN implementation in Open vSwitch
954 A: By default, Open vSwitch will use the assigned IANA port for VXLAN, which
955 is 4789. However, it is possible to configure the destination UDP port
956 manually on a per-VXLAN tunnel basis. An example of this configuration is
960 ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1
961 type=vxlan options:remote_ip=192.168.1.2 options:key=flow
962 options:dst_port=8472
965 Using OpenFlow (Manually or Via Controller)
966 -------------------------------------------
968 Q: What versions of OpenFlow does Open vSwitch support?
970 A: Open vSwitch 1.9 and earlier support only OpenFlow 1.0 (plus
971 extensions that bring in many of the features from later versions
974 Open vSwitch 1.10 and later have experimental support for OpenFlow
975 1.2 and 1.3. On these versions of Open vSwitch, the following
976 command enables OpenFlow 1.0, 1.2, and 1.3 on bridge br0:
978 ovs-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow12,OpenFlow13
980 Open vSwitch version 1.12 and later will have experimental support
981 for OpenFlow 1.1, 1.2, and 1.3. On these versions of Open vSwitch,
982 the following command enables OpenFlow 1.0, 1.1, 1.2, and 1.3 on
985 ovs-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13
987 Use the -O option to enable support for later versions of OpenFlow
988 in ovs-ofctl. For example:
990 ovs-ofctl -O OpenFlow13 dump-flows br0
992 Support for OpenFlow 1.1, 1.2, and 1.3 is still incomplete. Work
993 to be done is tracked in OPENFLOW-1.1+ in the Open vSwitch sources
994 (also via http://openvswitch.org/development/openflow-1-x-plan/).
995 When support for a given OpenFlow version is solidly implemented,
996 Open vSwitch will enable that version by default.
998 Q: I'm getting "error type 45250 code 0". What's that?
1000 A: This is a Open vSwitch extension to OpenFlow error codes. Open
1001 vSwitch uses this extension when it must report an error to an
1002 OpenFlow controller but no standard OpenFlow error code is
1005 Open vSwitch logs the errors that it sends to controllers, so the
1006 easiest thing to do is probably to look at the ovs-vswitchd log to
1007 find out what the error was.
1009 If you want to dissect the extended error message yourself, the
1010 format is documented in include/openflow/nicira-ext.h in the Open
1011 vSwitch source distribution. The extended error codes are
1012 documented in lib/ofp-errors.h.
1014 Q1: Some of the traffic that I'd expect my OpenFlow controller to see
1015 doesn't actually appear through the OpenFlow connection, even
1016 though I know that it's going through.
1017 Q2: Some of the OpenFlow flows that my controller sets up don't seem
1018 to apply to certain traffic, especially traffic between OVS and
1019 the controller itself.
1021 A: By default, Open vSwitch assumes that OpenFlow controllers are
1022 connected "in-band", that is, that the controllers are actually
1023 part of the network that is being controlled. In in-band mode,
1024 Open vSwitch sets up special "hidden" flows to make sure that
1025 traffic can make it back and forth between OVS and the controllers.
1026 These hidden flows are higher priority than any flows that can be
1027 set up through OpenFlow, and they are not visible through normal
1028 OpenFlow flow table dumps.
1030 Usually, the hidden flows are desirable and helpful, but
1031 occasionally they can cause unexpected behavior. You can view the
1032 full OpenFlow flow table, including hidden flows, on bridge br0
1035 ovs-appctl bridge/dump-flows br0
1037 to help you debug. The hidden flows are those with priorities
1038 greater than 65535 (the maximum priority that can be set with
1041 The DESIGN file at the top level of the Open vSwitch source
1042 distribution describes the in-band model in detail.
1044 If your controllers are not actually in-band (e.g. they are on
1045 localhost via 127.0.0.1, or on a separate network), then you should
1046 configure your controllers in "out-of-band" mode. If you have one
1047 controller on bridge br0, then you can configure out-of-band mode
1050 ovs-vsctl set controller br0 connection-mode=out-of-band
1052 Q: I configured all my controllers for out-of-band control mode but
1053 "ovs-appctl bridge/dump-flows" still shows some hidden flows.
1055 A: You probably have a remote manager configured (e.g. with "ovs-vsctl
1056 set-manager"). By default, Open vSwitch assumes that managers need
1057 in-band rules set up on every bridge. You can disable these rules
1060 ovs-vsctl set bridge br0 other-config:disable-in-band=true
1062 This actually disables in-band control entirely for the bridge, as
1063 if all the bridge's controllers were configured for out-of-band
1066 Q: My OpenFlow controller doesn't see the VLANs that I expect.
1068 A: See answer under "VLANs", above.
1070 Q: I ran "ovs-ofctl add-flow br0 nw_dst=192.168.0.1,actions=drop"
1071 but I got a funny message like this:
1073 ofp_util|INFO|normalization changed ofp_match, details:
1074 ofp_util|INFO| pre: nw_dst=192.168.0.1
1077 and when I ran "ovs-ofctl dump-flows br0" I saw that my nw_dst
1078 match had disappeared, so that the flow ends up matching every
1081 A: The term "normalization" in the log message means that a flow
1082 cannot match on an L3 field without saying what L3 protocol is in
1083 use. The "ovs-ofctl" command above didn't specify an L3 protocol,
1084 so the L3 field match was dropped.
1086 In this case, the L3 protocol could be IP or ARP. A correct
1087 command for each possibility is, respectively:
1089 ovs-ofctl add-flow br0 ip,nw_dst=192.168.0.1,actions=drop
1093 ovs-ofctl add-flow br0 arp,nw_dst=192.168.0.1,actions=drop
1095 Similarly, a flow cannot match on an L4 field without saying what
1096 L4 protocol is in use. For example, the flow match "tp_src=1234"
1097 is, by itself, meaningless and will be ignored. Instead, to match
1098 TCP source port 1234, write "tcp,tp_src=1234", or to match UDP
1099 source port 1234, write "udp,tp_src=1234".
1101 Q: How can I figure out the OpenFlow port number for a given port?
1103 A: The OFPT_FEATURES_REQUEST message requests an OpenFlow switch to
1104 respond with an OFPT_FEATURES_REPLY that, among other information,
1105 includes a mapping between OpenFlow port names and numbers. From a
1106 command prompt, "ovs-ofctl show br0" makes such a request and
1107 prints the response for switch br0.
1109 The Interface table in the Open vSwitch database also maps OpenFlow
1110 port names to numbers. To print the OpenFlow port number
1111 associated with interface eth0, run:
1113 ovs-vsctl get Interface eth0 ofport
1115 You can print the entire mapping with:
1117 ovs-vsctl -- --columns=name,ofport list Interface
1119 but the output mixes together interfaces from all bridges in the
1120 database, so it may be confusing if more than one bridge exists.
1122 In the Open vSwitch database, ofport value -1 means that the
1123 interface could not be created due to an error. (The Open vSwitch
1124 log should indicate the reason.) ofport value [] (the empty set)
1125 means that the interface hasn't been created yet. The latter is
1126 normally an intermittent condition (unless ovs-vswitchd is not
1129 Q: I added some flows with my controller or with ovs-ofctl, but when I
1130 run "ovs-dpctl dump-flows" I don't see them.
1132 A: ovs-dpctl queries a kernel datapath, not an OpenFlow switch. It
1133 won't display the information that you want. You want to use
1134 "ovs-ofctl dump-flows" instead.
1136 Q: It looks like each of the interfaces in my bonded port shows up
1137 as an individual OpenFlow port. Is that right?
1139 A: Yes, Open vSwitch makes individual bond interfaces visible as
1140 OpenFlow ports, rather than the bond as a whole. The interfaces
1141 are treated together as a bond for only a few purposes:
1143 - Sending a packet to the OFPP_NORMAL port. (When an OpenFlow
1144 controller is not configured, this happens implicitly to
1147 - Mirrors configured for output to a bonded port.
1149 It would make a lot of sense for Open vSwitch to present a bond as
1150 a single OpenFlow port. If you want to contribute an
1151 implementation of such a feature, please bring it up on the Open
1152 vSwitch development mailing list at dev@openvswitch.org.
1154 Q: I have a sophisticated network setup involving Open vSwitch, VMs or
1155 multiple hosts, and other components. The behavior isn't what I
1158 A: To debug network behavior problems, trace the path of a packet,
1159 hop-by-hop, from its origin in one host to a remote host. If
1160 that's correct, then trace the path of the response packet back to
1163 Usually a simple ICMP echo request and reply ("ping") packet is
1164 good enough. Start by initiating an ongoing "ping" from the origin
1165 host to a remote host. If you are tracking down a connectivity
1166 problem, the "ping" will not display any successful output, but
1167 packets are still being sent. (In this case the packets being sent
1168 are likely ARP rather than ICMP.)
1170 Tools available for tracing include the following:
1172 - "tcpdump" and "wireshark" for observing hops across network
1173 devices, such as Open vSwitch internal devices and physical
1176 - "ovs-appctl dpif/dump-flows <br>" in Open vSwitch 1.10 and
1177 later or "ovs-dpctl dump-flows <br>" in earlier versions.
1178 These tools allow one to observe the actions being taken on
1179 packets in ongoing flows.
1181 See ovs-vswitchd(8) for "ovs-appctl dpif/dump-flows"
1182 documentation, ovs-dpctl(8) for "ovs-dpctl dump-flows"
1183 documentation, and "Why are there so many different ways to
1184 dump flows?" above for some background.
1186 - "ovs-appctl ofproto/trace" to observe the logic behind how
1187 ovs-vswitchd treats packets. See ovs-vswitchd(8) for
1188 documentation. You can out more details about a given flow
1189 that "ovs-dpctl dump-flows" displays, by cutting and pasting
1190 a flow from the output into an "ovs-appctl ofproto/trace"
1193 - SPAN, RSPAN, and ERSPAN features of physical switches, to
1194 observe what goes on at these physical hops.
1196 Starting at the origin of a given packet, observe the packet at
1197 each hop in turn. For example, in one plausible scenario, you
1200 1. "tcpdump" the "eth" interface through which an ARP egresses
1201 a VM, from inside the VM.
1203 2. "tcpdump" the "vif" or "tap" interface through which the ARP
1204 ingresses the host machine.
1206 3. Use "ovs-dpctl dump-flows" to spot the ARP flow and observe
1207 the host interface through which the ARP egresses the
1208 physical machine. You may need to use "ovs-dpctl show" to
1209 interpret the port numbers. If the output seems surprising,
1210 you can use "ovs-appctl ofproto/trace" to observe details of
1211 how ovs-vswitchd determined the actions in the "ovs-dpctl
1214 4. "tcpdump" the "eth" interface through which the ARP egresses
1215 the physical machine.
1217 5. "tcpdump" the "eth" interface through which the ARP
1218 ingresses the physical machine, at the remote host that
1221 6. Use "ovs-dpctl dump-flows" to spot the ARP flow on the
1222 remote host that receives the ARP and observe the VM "vif"
1223 or "tap" interface to which the flow is directed. Again,
1224 "ovs-dpctl show" and "ovs-appctl ofproto/trace" might help.
1226 7. "tcpdump" the "vif" or "tap" interface to which the ARP is
1229 8. "tcpdump" the "eth" interface through which the ARP
1230 ingresses a VM, from inside the VM.
1232 It is likely that during one of these steps you will figure out the
1233 problem. If not, then follow the ARP reply back to the origin, in
1236 Q: How do I make a flow drop packets?
1238 A: An empty set of actions causes a packet to be dropped. You can
1239 specify an empty set of actions with "actions=" on the ovs-ofctl
1240 command line. For example:
1242 ovs-ofctl add-flow br0 priority=65535,actions=
1244 would cause every packet entering switch br0 to be dropped.
1246 You can write "drop" explicitly if you like. The effect is the
1247 same. Thus, the following command also causes every packet
1248 entering switch br0 to be dropped:
1250 ovs-ofctl add-flow br0 priority=65535,actions=drop
1252 Q: I added a flow to send packets out the ingress port, like this:
1254 ovs-ofctl add-flow br0 in_port=2,actions=2
1256 but OVS drops the packets instead.
1258 A: Yes, OpenFlow requires a switch to ignore attempts to send a packet
1259 out its ingress port. The rationale is that dropping these packets
1260 makes it harder to loop the network. Sometimes this behavior can
1261 even be convenient, e.g. it is often the desired behavior in a flow
1262 that forwards a packet to several ports ("floods" the packet).
1264 Sometimes one really needs to send a packet out its ingress port.
1265 In this case, output to OFPP_IN_PORT, which in ovs-ofctl syntax is
1266 expressed as just "in_port", e.g.:
1268 ovs-ofctl add-flow br0 in_port=2,actions=in_port
1270 This also works in some circumstances where the flow doesn't match
1271 on the input port. For example, if you know that your switch has
1272 five ports numbered 2 through 6, then the following will send every
1273 received packet out every port, even its ingress port:
1275 ovs-ofctl add-flow br0 actions=2,3,4,5,6,in_port
1279 ovs-ofctl add-flow br0 actions=all,in_port
1281 Sometimes, in complicated flow tables with multiple levels of
1282 "resubmit" actions, a flow needs to output to a particular port
1283 that may or may not be the ingress port. It's difficult to take
1284 advantage of OFPP_IN_PORT in this situation. To help, Open vSwitch
1285 provides, as an OpenFlow extension, the ability to modify the
1286 in_port field. Whatever value is currently in the in_port field is
1287 the port to which outputs will be dropped, as well as the
1288 destination for OFPP_IN_PORT. This means that the following will
1289 reliably output to port 2 or to ports 2 through 6, respectively:
1291 ovs-ofctl add-flow br0 in_port=2,actions=load:0->NXM_OF_IN_PORT[],2
1292 ovs-ofctl add-flow br0 actions=load:0->NXM_OF_IN_PORT[],2,3,4,5,6
1294 If the input port is important, then one may save and restore it on
1297 ovs-ofctl add-flow br0 actions=push:NXM_OF_IN_PORT[],\
1298 load:0->NXM_OF_IN_PORT[],\
1300 pop:NXM_OF_IN_PORT[]
1306 bugs@openvswitch.org
1307 http://openvswitch.org/
git://git.onelab.eu / sliver-openvswitch.git / blob