2 ------------------------
3 - Compatible with Open vSwitch kernel module included in Linux 3.3.
4 - New "VLAN splinters" feature to work around buggy device drivers
5 in old Linux versions. (This feature is deprecated. When
6 broken device drivers are no longer in widespread use, we will
7 delete this feature.) See ovs-vswitchd.conf.db(5) for more
10 - Added ability to match on IPv6 flow label through NXM.
11 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
12 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
13 - Added ability to modify ECN bits in IPv4.
14 - Added ability to modify TTL in IPv4.
16 - Don't require the "normal" action to use mirrors. Traffic will
17 now be properly mirrored for any flows, regardless of their
19 - Track packet and byte statistics sent on mirrors.
21 - New "fdb/flush" command to flush bridge's MAC learning table.
23 - A new distributed testing tool that allows one to diagnose performance
24 and connectivity issues. This tool currently is not included in RH or
26 - RHEL packaging now supports integration with Red Hat network scripts.
28 - Post 1.4.*, OVS will be changing the default bond mode from balance-slb
29 to active-backup. SLB bonds carry significant risks with them
30 (documented vswitchd/INTERNALS) which we want to prevent unsuspecting
31 users from running into. Users are advised to update any scripts or
32 configuration which may be negatively impacted by explicitly setting
33 the bond mode which they want to use.
37 ------------------------
39 - Added an OpenFlow extension which allows the "output" action to accept
41 - Added an OpenFlow extension for flexible learning.
42 - Bumped number of NXM registers from four to five.
44 - New "version" command to determine version of running daemon.
45 - If no argument is provided for "cfm/show", displays detailed
46 information about all interfaces with CFM enabled.
47 - If no argument is provided for "lacp/show", displays detailed
48 information about all ports with LACP enabled.
50 - New "set-if" command to modify a datapath port's configuration.
52 - The software switch now supports 255 OpenFlow tables, instead
53 of just one. By default, only table 0 is consulted, but the
54 new NXAST_RESUBMIT_TABLE action can look up in additional
55 tables. Tables 128 and above are reserved for use by the
56 switch itself; please use only tables 0 through 127.
57 - Add support for 802.1D spanning tree (STP).
58 - Fragment handling extensions:
59 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
60 fields are made available for matching in fragments with
62 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
63 via "ip_frag" in ovs-ofctl).
64 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
65 fragment handling policy.
66 - CAPWAP tunneling now supports an extension to transport a 64-bit key.
67 By default it remains compatible with the old version and other
68 standards-based implementations.
69 - Flow setups are now processed in a round-robin manner across ports
70 to prevent any single client from monopolizing the CPU and conducting
71 a denial of service attack.
72 - Added support for native VLAN tagging. A new "vlan_mode"
73 parameter can be set for "port". Possible values: "access",
74 "trunk", "native-tagged" and "native-untagged".
75 - test-openflowd has been removed. Please use ovs-vswitchd instead.
78 ------------------------
79 - New "ofproto" abstraction layer to ease porting to hardware
81 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
82 - Datapath support for Linux kernels up to 3.0.
84 - New "bundle" and "bundle_load" action extensions.
86 - Implement table unique constraints.
87 - Support cooperative locking between callers.
89 - New "-s" option for "show" command prints packet and byte
90 counters for each port.
92 - New "--readd" option for "replace-flows".
94 - New "show" command to print an overview of configuration.
95 - New "comment" command to add remark that explains intentions.
96 - ovs-brcompatd has been rewritten to fix long-standing bugs.
97 - ovs-openflowd has been renamed test-openflowd and moved into the
98 tests directory. Its presence confused too many users. Please
99 use ovs-vswitchd instead.
100 - New ovs-benchmark utility to test flow setup performance.
101 - A new log level "off" has been added. Configuring a log facility
102 "off" prevents any messages from being logged to it. Previously,
103 "emer" was effectively "off" because no messages were ever logged at
104 level "emer". Now, errors that cause a process to exit are logged
106 - "configure" option --with-l26 has been renamed --with-linux, and
107 --with-l26-source has been renamed --with-linux-source. The old
108 names will be removed after the next release, so please update
110 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
111 datapath/linux-2.6/compat-2.6 directories.
113 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
114 Please use the extensible match extensions instead.
115 - Removed the Maintenance_Point and Monitor tables in an effort
116 to simplify 802.1ag configuration.
117 - Performance and scalability improvements
121 ------------------------
122 - Ability to define policies over IPv6
125 - Support for extensible match extensions to OpenFlow
127 - Support for HFSC qdisc.
128 - Queue used by in-band control can now be configured.
130 - Kernel<->userspace interface has been reworked and should be
131 close to a stable ABI now.
132 - "Port group" concept has been dropped.
133 - GRE over IPSEC tunnels
135 - New active backup bonding mode.
136 - New L4 hashing support when LACP is enabled.
137 - Source MAC hash now includes VLAN field also.
139 - Greatly improved handling of large flow tables
141 - "show" command now prints full vport configuration.
142 - "dump-groups" command removed since kernel support for
143 port groups was dropped.
145 - New commands for working with the new Managers table.
146 - "list" command enhanced with new formatting options and --columns
148 - "get" command now accepts new --id option.
149 - New "find" command.
151 - New "queue-stats" command for printing queue stats.
152 - New commands "replace-flows" and "diff-flows".
153 - Commands to add and remove flows can now read from files.
154 - New --flow-format option to enable or disable NXM.
155 - New --more option to increase OpenFlow message verbosity.
156 - Removed "tun-cookie" command, which is no longer useful.
157 - ovs-controller enhancements for testing various features.
158 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
159 bugs. New ovs-vlan-bug-workaround command for enabling and
160 disabling a workaround for these driver bugs.
162 - "Resubmit" actions now update flow statistics.
163 - New "register" extension for use in matching and actions, via NXM.
164 - New "multipath" experimental action extension.
165 - New support for matching multicast Ethernet frames, via NXM.
166 - New extension for OpenFlow vendor error codes.
167 - New extension to set the QoS output queue without actually
168 sending to an output port.
169 - Open vSwitch now reports a single flow table, instead of
170 separate hash and wildcard tables. This better models the
171 current implementation.
172 - New experimental "note" action.
173 - New "ofproto/trace" ovs-appctl command and associated utilities
174 to ease debugging complex flow tables.
176 - Schema documentation now includes an entity-relationship diagram.
177 - The database is now garbage collected. In most tables,
178 unreferenced rows will be deleted automatically.
179 - Many tables now include statistics updated periodically by
180 ovs-vswitchd or ovsdb-server.
181 - Every table now has an "external-ids" column for use by OVS
183 - There is no default controller anymore. Each bridge must have its
184 controller individually specified.
185 - The "fail-mode" is now a property of a Bridge instead of a Controller.
186 - New versioning and checksum features.
187 - New Managers table and manager_options column in Open_vSwitch table
188 for specifying managers. The old "managers" column in the
189 Open_vSwitch table has been removed.
190 - Many "name" columns are now immutable.
192 - Dropped support for XenServer pre-5.6.100.
193 - Dropped support for Linux pre-2.6.18.
194 - Dropped controller discovery support.
195 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
196 Statistics reporting in the database is a rough equivalent.
197 - Dropped the "corekeeper" package (now separate, at
198 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
199 - Performance and scalability improvements
202 v1.1.0pre2 - 13 Sep 2010
203 ------------------------
206 v1.1.0pre1 - 31 Aug 2010
207 ------------------------
208 - OpenFlow 1.0 slicing (QoS) functionality
209 - Python bindings for configuration database (no write support)
210 - Performance and scalability improvements
215 - New "patch" interface type
220 - Configuration database with remote management
223 - Support for XenServer 5.5 and 5.6
224 - Performance and scalability improvements
227 v0.99.2 - 18 Feb 2010
228 ---------------------
231 v0.99.1 - 25 Jan 2010
232 ---------------------
233 - Add support for sFlow(R)
234 - Make headers compatible with C++
237 v0.99.0 - 14 Jan 2010
238 ---------------------
239 - User-space forwarding engine
242 v0.90.7 - 29 Nov 2009
243 ---------------------
244 - Add support for NetFlow active timeouts
251 v0.90.5 - 21 Sep 2009
252 ---------------------
253 - Generalize in-band control to more diverse network setups