2 * arch/arm/mach-ixp2000/common.c
4 * Common routines used by all IXP2400/2800 based platforms.
6 * Author: Deepak Saxena <dsaxena@plexity.net>
8 * Copyright 2004 (C) MontaVista Software, Inc.
10 * Based on work Copyright (C) 2002-2003 Intel Corporation
12 * This file is licensed under the terms of the GNU General Public
13 * License version 2. This program is licensed "as is" without any
14 * warranty of any kind, whether express or implied.
17 #include <linux/config.h>
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/spinlock.h>
21 #include <linux/sched.h>
22 #include <linux/interrupt.h>
23 #include <linux/serial.h>
24 #include <linux/tty.h>
25 #include <linux/bitops.h>
26 #include <linux/serial_core.h>
29 #include <asm/types.h>
30 #include <asm/setup.h>
31 #include <asm/memory.h>
32 #include <asm/hardware.h>
33 #include <asm/mach-types.h>
35 #include <asm/system.h>
36 #include <asm/tlbflush.h>
37 #include <asm/pgtable.h>
39 #include <asm/mach/map.h>
40 #include <asm/mach/time.h>
41 #include <asm/mach/irq.h>
43 static spinlock_t ixp2000_slowport_lock = SPIN_LOCK_UNLOCKED;
44 static unsigned long ixp2000_slowport_irq_flags;
46 /*************************************************************************
47 * Slowport access routines
48 *************************************************************************/
49 void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
52 spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
54 old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
55 old_cfg->WTC = *IXP2000_SLOWPORT_WTC2;
56 old_cfg->RTC = *IXP2000_SLOWPORT_RTC2;
57 old_cfg->PCR = *IXP2000_SLOWPORT_PCR;
58 old_cfg->ADC = *IXP2000_SLOWPORT_ADC;
60 ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR);
61 ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
62 ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
63 ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
64 ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
67 void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
69 ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR);
70 ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
71 ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
72 ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
73 ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
75 spin_unlock_irqrestore(&ixp2000_slowport_lock,
76 ixp2000_slowport_irq_flags);
79 /*************************************************************************
80 * Chip specific mappings shared by all IXP2000 systems
81 *************************************************************************/
82 static struct map_desc ixp2000_small_io_desc[] __initdata = {
84 .virtual = IXP2000_GLOBAL_REG_VIRT_BASE,
85 .physical = IXP2000_GLOBAL_REG_PHYS_BASE,
86 .length = IXP2000_GLOBAL_REG_SIZE,
89 .virtual = IXP2000_GPIO_VIRT_BASE,
90 .physical = IXP2000_GPIO_PHYS_BASE,
91 .length = IXP2000_GPIO_SIZE,
94 .virtual = IXP2000_TIMER_VIRT_BASE,
95 .physical = IXP2000_TIMER_PHYS_BASE,
96 .length = IXP2000_TIMER_SIZE,
99 .virtual = IXP2000_UART_VIRT_BASE,
100 .physical = IXP2000_UART_PHYS_BASE,
101 .length = IXP2000_UART_SIZE,
104 .virtual = IXP2000_SLOWPORT_CSR_VIRT_BASE,
105 .physical = IXP2000_SLOWPORT_CSR_PHYS_BASE,
106 .length = IXP2000_SLOWPORT_CSR_SIZE,
109 .virtual = IXP2000_INTCTL_VIRT_BASE,
110 .physical = IXP2000_INTCTL_PHYS_BASE,
111 .length = IXP2000_INTCTL_SIZE,
114 .virtual = IXP2000_PCI_CREG_VIRT_BASE,
115 .physical = IXP2000_PCI_CREG_PHYS_BASE,
116 .length = IXP2000_PCI_CREG_SIZE,
121 static struct map_desc ixp2000_large_io_desc[] __initdata = {
123 .virtual = IXP2000_PCI_CSR_VIRT_BASE,
124 .physical = IXP2000_PCI_CSR_PHYS_BASE,
125 .length = IXP2000_PCI_CSR_SIZE,
128 .virtual = IXP2000_PCI_IO_VIRT_BASE,
129 .physical = IXP2000_PCI_IO_PHYS_BASE,
130 .length = IXP2000_PCI_IO_SIZE,
133 .virtual = IXP2000_PCI_CFG0_VIRT_BASE,
134 .physical = IXP2000_PCI_CFG0_PHYS_BASE,
135 .length = IXP2000_PCI_CFG0_SIZE,
138 .virtual = IXP2000_PCI_CFG1_VIRT_BASE,
139 .physical = IXP2000_PCI_CFG1_PHYS_BASE,
140 .length = IXP2000_PCI_CFG1_SIZE,
145 static struct uart_port ixp2000_serial_port = {
146 .membase = (char *)(IXP2000_UART_VIRT_BASE + 3),
147 .mapbase = IXP2000_UART_PHYS_BASE + 3,
148 .irq = IRQ_IXP2000_UART,
149 .flags = UPF_SKIP_TEST,
158 void __init ixp2000_map_io(void)
160 iotable_init(ixp2000_small_io_desc, ARRAY_SIZE(ixp2000_small_io_desc));
161 iotable_init(ixp2000_large_io_desc, ARRAY_SIZE(ixp2000_large_io_desc));
162 early_serial_setup(&ixp2000_serial_port);
165 /*************************************************************************
166 * Timer-tick functions for IXP2000
167 *************************************************************************/
168 static unsigned ticks_per_jiffy;
169 static unsigned ticks_per_usec;
171 unsigned long ixp2000_gettimeoffset (void)
173 unsigned long elapsed;
175 /* Get ticks since last perfect jiffy */
176 elapsed = ticks_per_jiffy - *IXP2000_T1_CSR;
178 return elapsed / ticks_per_usec;
181 static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
183 write_seqlock(&xtime_lock);
186 ixp2000_reg_write(IXP2000_T1_CLR, 1);
190 write_sequnlock(&xtime_lock);
195 static struct irqaction ixp2000_timer_irq = {
196 .name = "IXP2000 Timer Tick",
197 .flags = SA_INTERRUPT,
198 .handler = ixp2000_timer_interrupt
201 void __init ixp2000_init_time(unsigned long tick_rate)
203 ixp2000_reg_write(IXP2000_T1_CLR, 0);
204 ixp2000_reg_write(IXP2000_T2_CLR, 0);
206 ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
207 ticks_per_usec = tick_rate / 1000000;
209 ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy);
210 ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7));
212 /* register for interrupt */
213 setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq);
216 /*************************************************************************
218 *************************************************************************/
219 static unsigned long GPIO_IRQ_rising_edge;
220 static unsigned long GPIO_IRQ_falling_edge;
221 static unsigned long GPIO_IRQ_level_low;
222 static unsigned long GPIO_IRQ_level_high;
224 void gpio_line_config(int line, int style)
228 local_irq_save(flags);
230 if(style == GPIO_OUT) {
231 /* if it's an output, it ain't an interrupt anymore */
232 ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line));
233 GPIO_IRQ_falling_edge &= ~(1 << line);
234 GPIO_IRQ_rising_edge &= ~(1 << line);
235 GPIO_IRQ_level_low &= ~(1 << line);
236 GPIO_IRQ_level_high &= ~(1 << line);
237 ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
238 ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
239 ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
240 ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
241 irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0;
242 } else if(style == GPIO_IN) {
243 ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line));
246 local_irq_restore(flags);
250 /*************************************************************************
251 * IRQ handling IXP2000
252 *************************************************************************/
253 static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
256 unsigned long status = *IXP2000_GPIO_INST;
258 for (i = 0; i <= 7; i++) {
259 if (status & (1<<i)) {
260 desc = irq_desc + i + IRQ_IXP2000_GPIO0;
261 desc->handle(i + IRQ_IXP2000_GPIO0, desc, regs);
266 static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
268 ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
269 ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
272 static void ixp2000_GPIO_irq_mask(unsigned int irq)
274 ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
277 static void ixp2000_GPIO_irq_unmask(unsigned int irq)
279 ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
282 static struct irqchip ixp2000_GPIO_irq_chip = {
283 .ack = ixp2000_GPIO_irq_mask_ack,
284 .mask = ixp2000_GPIO_irq_mask,
285 .unmask = ixp2000_GPIO_irq_unmask
288 static void ixp2000_pci_irq_mask(unsigned int irq)
290 unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
291 if (irq == IRQ_IXP2000_PCIA)
292 ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
293 else if (irq == IRQ_IXP2000_PCIB)
294 ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
297 static void ixp2000_pci_irq_unmask(unsigned int irq)
299 unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
300 if (irq == IRQ_IXP2000_PCIA)
301 ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26)));
302 else if (irq == IRQ_IXP2000_PCIB)
303 ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
306 static struct irqchip ixp2000_pci_irq_chip = {
307 .ack = ixp2000_pci_irq_mask,
308 .mask = ixp2000_pci_irq_mask,
309 .unmask = ixp2000_pci_irq_unmask
312 static void ixp2000_irq_mask(unsigned int irq)
314 ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
317 static void ixp2000_irq_unmask(unsigned int irq)
319 ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq));
322 static struct irqchip ixp2000_irq_chip = {
323 .ack = ixp2000_irq_mask,
324 .mask = ixp2000_irq_mask,
325 .unmask = ixp2000_irq_unmask
328 void __init ixp2000_init_irq(void)
335 ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff);
336 ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff);
338 /* clear all GPIO edge/level detects */
339 ixp2000_reg_write(IXP2000_GPIO_REDR, 0);
340 ixp2000_reg_write(IXP2000_GPIO_FEDR, 0);
341 ixp2000_reg_write(IXP2000_GPIO_LSHR, 0);
342 ixp2000_reg_write(IXP2000_GPIO_LSLR, 0);
343 ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
345 /* clear PCI interrupt sources */
346 ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
349 * Certain bits in the IRQ status register of the
350 * IXP2000 are reserved. Instead of trying to map
351 * things non 1:1 from bit position to IRQ number,
352 * we mark the reserved IRQs as invalid. This makes
353 * our mask/unmask code much simpler.
355 for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
356 if((1 << irq) & IXP2000_VALID_IRQ_MASK) {
357 set_irq_chip(irq, &ixp2000_irq_chip);
358 set_irq_handler(irq, do_level_IRQ);
359 set_irq_flags(irq, IRQF_VALID);
360 } else set_irq_flags(irq, 0);
364 * GPIO IRQs are invalid until someone sets the interrupt mode
365 * by calling gpio_line_set();
367 for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
368 set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
369 set_irq_handler(irq, do_level_IRQ);
370 set_irq_flags(irq, 0);
372 set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
377 ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI));
378 for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) {
379 set_irq_chip(irq, &ixp2000_pci_irq_chip);
380 set_irq_handler(irq, do_level_IRQ);
381 set_irq_flags(irq, IRQF_VALID);