2 menu "SA11x0 Implementations"
8 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
9 Microprocessor Development Board (also known as the Assabet).
11 config ASSABET_NEPONSET
12 bool "Include support for Neponset"
13 depends on SA1100_ASSABET
15 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
16 Microprocessor Development Board (Assabet) with the SA-1111
17 Development Board (Nepon).
19 config SA1100_ADSBITSY
21 depends on ARCH_SA1100
23 Say Y here if you are using Applied Data Systems Intel(R)
24 StrongARM(R) 1110 based Bitsy, 3 x 5 inches in size, Compaq - IPAQ -
26 <http://www.applieddata.net/products_bitsySpec.asp> for more
31 depends on ARCH_SA1100
33 Say Y here if you are using the Intel(R) StrongARM(R) SA-1100
34 Microprocessor Development Board (also known as the Brutus).
38 depends on ARCH_SA1100
40 The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
41 More information is available at:
42 <http://www.intrinsyc.com/products/cerfboard/>.
44 Say Y if configuring for an Intrinsyc CerfBoard.
48 prompt "Cerf Flash available"
49 depends on SA1100_CERF
50 default SA1100_CERF_FLASH_8MB
52 config SA1100_CERF_FLASH_8MB
55 config SA1100_CERF_FLASH_16MB
58 config SA1100_CERF_FLASH_32MB
64 bool "Compaq iPAQ H3100"
65 depends on ARCH_SA1100
67 Say Y here if you intend to run this kernel on the Compaq iPAQ
68 H3100 handheld computer. Information about this machine and the
69 Linux port to this machine can be found at:
71 <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
72 <http://www.compaq.com/products/handhelds/pocketpc/>
75 bool "Compaq iPAQ H3600/H3700"
76 depends on ARCH_SA1100
78 Say Y here if you intend to run this kernel on the Compaq iPAQ
79 H3600 handheld computer. Information about this machine and the
80 Linux port to this machine can be found at:
82 <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
83 <http://www.compaq.com/products/handhelds/pocketpc/>
86 bool "Compaq iPAQ H3800"
87 depends on ARCH_SA1100
89 Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
90 series handheld computer. Information about this machine and the
91 Linux port to this machine can be found at:
93 <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
94 <http://www.compaq.com/products/handhelds/pocketpc/>
98 depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800
101 #dep_bool ' Consus' CONFIG_SA1100_CONSUS $CONFIG_ARCH_SA1100
102 #dep_bool ' Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
103 config SA1100_EXTENEX1
104 bool "Extenex HandHeld Theater (Squashtail)"
105 depends on ARCH_SA1100
107 config SA1100_EXTENEX1_16MB
108 bool "Support 16 MB of DRAM (not just 8)"
109 depends on SA1100_EXTENEX1
111 config SA1100_FLEXANET
113 depends on ARCH_SA1100
115 Say Y here if you intend to run this kernel on the FlexaNet
116 handheld instruments. Information about this machine can be
117 found at: <http://www.flexanet.com/>.
119 config SA1100_FREEBIRD
121 depends on ARCH_SA1100
123 Support the FreeBird board used in Coventive embedded products. See
124 Documentation/arm/SA1100/Freebird for more.
126 config SA1100_GRAPHICSCLIENT
127 bool "GraphicsClient Plus"
128 depends on ARCH_SA1100
130 Say Y here if you are using an Applied Data Systems Intel(R)
131 StrongARM(R) SA-1100 based Graphics Client SBC. See
132 <http://www.flatpanels.com/> for information on this system.
134 config SA1100_GRAPHICSMASTER
135 bool "GraphicsMaster"
136 depends on ARCH_SA1100
138 Say Y here if you are using an Applied Data Systems Intel(R)
139 StrongARM(R) SA-1100 based Graphics Master SBC with SA-1111
140 StrongARM companion chip. See
141 <http://www.applieddata.net/products_masterSpec.asp> for information
145 bool "HP Labs BadgePAD 4"
146 depends on ARCH_SA1100
148 Say Y here if you want to build a kernel for the HP Laboratories
151 config SA1100_JORNADA720
152 bool "HP Jornada 720"
153 depends on ARCH_SA1100
155 Say Y here if you want to build a kernel for the HP Jornada 720
156 handheld computer. See <http://www.hp.com/jornada/products/720>
159 config SA1100_HACKKIT
160 bool "HackKit Core CPU Board"
161 depends on ARCH_SA1100
163 Say Y here to support the HackKit Core CPU Board
164 <http://hackkit.eletztrick.de>;
166 config SA1100_HUW_WEBPANEL
168 depends on ARCH_SA1100
170 Say Y here to support the HuW Webpanel produced by Hoeft & Wessel
171 AG. English-language website is at
172 <http://www.hoeft-wessel.de/en.htm>; credits and build instructions
173 at Documentation/arm/SA1100/HUW_WEBPANEL.
177 depends on ARCH_SA1100
179 Say Y here if you are using the Compaq Itsy experimental pocket
180 computer. See <http://research.compaq.com/wrl/projects/itsy/> for
185 depends on ARCH_SA1100
187 Say Y here if you are using the Linux Advanced Radio Terminal
188 (also known as the LART). See <http://www.lart.tudelft.nl/> for
189 information on the LART.
191 config SA1100_NANOENGINE
193 depends on ARCH_SA1100
195 The nanoEngine is a StrongARM 1110-based single board computer
196 from Bright Star Engineering. More information is available at:
197 <http://www.brightstareng.com/arm/nanoeng.htm>.
199 Say Y if configuring for a nanoEngine.
202 config SA1100_OMNIMETER
204 depends on ARCH_SA1100
206 Say Y here if you are using the inhand electronics OmniMeter. See
207 <http://www.inhandelectronics.com/omnimeter.asp> for details.
209 config SA1100_PANGOLIN
211 depends on ARCH_SA1100
213 Pangolin is a StrongARM 1110-based evaluation platform produced
214 by Dialogue Technology. It has EISA slots for ease of configuration
215 with SDRAM/Flash memory card, USB/Serial/Audio card, Compact Flash
216 card, and TFT-LCD card.
218 Say Y if configuring for a Pangolin.
223 depends on ARCH_SA1100
225 Say Y here if you are using a Portable Linux Embedded Board
226 (also known as PLEB). See <http://www.cse.unsw.edu.au/~pleb/>
227 for more information.
229 config SA1100_PT_SYSTEM3
231 depends on ARCH_SA1100
233 Say Y here if you intend to build a kernel suitable to run on
234 a Pruftechnik Digital Board. For more information see
235 <http://www.pruftechnik.com/>
237 config SA1100_SHANNON
239 depends on ARCH_SA1100
241 The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
242 limited edition webphone produced by Philips. The Shannon is a SA1100
243 platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
244 and a telco interface.
246 config SA1100_SHERMAN
248 depends on ARCH_SA1100
250 Say Y here to support the Blazie Engineering `Sherman' StrongARM
251 1110-based SBC, used primarily in assistance products for the
252 visually impaired. The company is now Freedom Scientific, with
253 a website at <http://www.freedomscientific.com/>. The Sherman
254 product, however, appears to have been discontinued.
258 depends on ARCH_SA1100
260 The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
261 are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
262 FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
263 PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
264 like CL4 in additional it has a PCMCIA-Slot. For more information
265 visit <http://www.my-siemens.com/> or <http://www.siemens.ch/>.
269 depends on ARCH_SA1100
271 The Radisys Corp. PFS-168 (aka Tulsa) is an IntelĀ® StrongArmĀ® SA-1110 based
272 computer which includes the SA-1111 Microprocessor Companion Chip and other
273 custom I/O designed to add connectivity and multimedia features for vending
274 and business machine applications. Say Y here if you require support for
279 depends on ARCH_SA1100
281 Say Y here if you are using a Visu Aide Intel(R) StrongARM(R)
282 SA-1100 based Victor Digital Talking Book Reader. See
283 <http://www.visuaide.com/products.html> for information on
288 depends on ARCH_SA1100
290 :: Config help missing ::
295 depends on ARCH_SA1100
297 Say Y here to support the Yopy PDA. Product information at
298 <http://www.yopy.com/>. See Documentation/arm/SA1100/Yopy
303 depends on ARCH_SA1100
305 Say Y here if you intend to run this kernel on the Stork
308 #config SA1100_TRIZEPS
310 # depends on ARCH_SA1100
314 #config TRIZEPS_MFTB2
316 # depends on SA1100_TRIZEPS
321 tristate "Generic PIO SSP"
322 depends on ARCH_SA1100
324 Say Y here to enable support for the generic PIO SSP driver.
325 This isn't for audio support, but for attached sensors and
326 other devices, eg for BadgePAD 4 sensor support, or Jornada
327 720 touchscreen support.
330 tristate "SA1100 USB function support"
331 depends on ARCH_SA1100
333 config SA1100_USB_NETLINK
334 tristate "Support for SA11x0 USB network link function"
335 depends on SA1100_USB
337 config SA1100_USB_CHAR
338 tristate "Support for SA11x0 USB character device emulation"
339 depends on SA1100_USB
342 tristate "Compaq iPAQ Handheld sleeve support"
343 depends on SA1100_H3600
345 Choose this option to enable support for extension packs (sleeves)
346 for the Compaq iPAQ H3XXX series of handheld computers. This option
347 is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension