1 openvswitch (1.12.0-1) unstable; urgency=low
5 * Experimental support for OpenFlow 1.1 (in addition to 1.2 and
6 1.3, which had experimental support in 1.10).
7 * New support for matching outer source and destination IP address
8 of tunneled packets, for tunnel ports configured with the newly
9 added "remote_ip=flow" and "local_ip=flow" options.
10 - The Interface table in the database has a new "ifindex" column to
11 report the interface's OS-assigned ifindex.
12 - New "check-oftest" Makefile target for running OFTest against Open
13 vSwitch. See README-OFTest for details.
14 - The flow eviction threshold has been moved to the Open_vSwitch table.
15 - Database names are now mandatory when specifying ovsdb-server options
16 through database paths (e.g. Private key option with the database name
17 should look like "--private-key=db:Open_vSwitch,SSL,private_key").
18 - Added ovs-dev.py, a utility script helpful for Open vSwitch developers.
20 -- Open vSwitch team <dev@openvswitch.org> Tue, 03 Jul 2013 15:02:34 -0700
22 openvswitch (1.11.0-1) unstable; urgency=low
24 * New upstream version
25 - Support for megaflows, which allows wildcarding in the kernel (and
26 any dpif implementation that supports wildcards). Depending on
27 the flow table and switch configuration, flow set up rates are
28 close to the Linux bridge.
29 - The "tutorial" directory contains a new tutorial for some advanced
30 Open vSwitch features.
31 - Stable bond mode has been removed.
32 - The autopath action has been removed.
33 - New support for the data encapsulation format of the LISP tunnel
34 protocol (RFC 6830). An external control plane or manual flow
35 setup is required for EID-to-RLOC mapping.
37 * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
38 1.1 and later are now implemented.
39 * New "stack" extension for use in actions, to push and pop from
41 * The "load" and "set_field" actions can now modify the "in_port". (This
42 allows one to enable output to a flow's input port by setting the
43 in_port to some unused value, such as OFPP_NONE.)
45 * New debugging commands "add-flow", "mod-flow", "del-flow".
46 - In dpif-based bridges, cache action translations, which can improve
47 flow set up performance by 80% with a complicated flow table.
48 - New syslog format, prefixed with "ovs|", to be easier to filter.
49 - RHEL: Removes the default firewall rule that allowed GRE traffic to
50 pass through. Any users that relied on this automatic firewall hole
51 will have to manually configure it. The ovs-ctl(8) manpage documents
52 the "enable-protocol" command that can be used as an alternative.
53 - New CFM demand mode which uses data traffic to indicate interface
56 -- Open vSwitch team <dev@openvswitch.org> Mon, 29 Apr 2013 14:30:34 -0700
58 openvswitch (1.10.0-1) unstable; urgency=low
60 * New upstream version
61 - Bridge compatibility support has been removed. Any uses that
62 rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
63 or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
65 - The maximum size of the MAC learning table is now configurable.
66 - With the Linux datapath, packets for new flows are now queued
67 separately on a per-port basis, so it should no longer be
68 possible for a large number of new flows arriving on one port to
69 prevent new flows from being processed on other ports.
70 - Many "ovs-vsctl" database commands now accept an --if-exists option.
71 Please refer to the ovs-vsctl manpage for details.
73 - Experimental support for newer versions of OpenFlow. See
74 the "What versions of OpenFlow does Open vSwitch support?"
75 question in the FAQ for more details.
76 - The OpenFlow "dp_desc" may now be configured by setting the
77 value of other-config:dp-desc in the Bridge table.
78 - It is possible to request the OpenFlow port number with the
79 "ofport_request" column in the Interface table.
81 - New support for the VXLAN tunnel protocol (see the IETF draft here:
82 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
83 - Tunneling requires the version of the kernel module paired with
84 Open vSwitch 1.9.0 or later.
85 - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
86 is no longer supported.
87 - Path MTU discovery is no longer supported.
89 - The "dump-flows" and "del-flows" no longer require an argument
90 if only one datapath exists.
92 - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
93 commands available allow control over logging rate limits.
94 - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
95 that mimic the equivalent ovs-dpctl commands.
96 - The ofproto library is now responsible for assigning OpenFlow port
97 numbers. An ofproto implementation should assign them when
98 port_construct() is called.
99 - All dpif-based bridges of a particular type share a common
100 datapath called "ovs-<type>", e.g. "ovs-system". The ovs-dpctl
101 commands will now return information on that shared datapath. To
102 get the equivalent bridge-specific information, use the new
103 "ovs-appctl dpif/*" commands.
104 - Backward-incompatible changes:
105 - Earlier Open vSwitch versions treated ANY as a wildcard in flow
106 syntax. OpenFlow 1.1 adds a port named ANY, which introduces a
107 conflict. ANY was rarely used in flow syntax, so we chose to
108 retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
109 - Patch ports no longer require kernel support, so they now work
110 with FreeBSD and the kernel module built into Linux 3.3 and later.
112 -- Open vSwitch team <dev@openvswitch.org> Wed, 01 May 2013 14:28:21 -0700
114 openvswitch (1.9.0-1) unstable; urgency=low
115 [ Open vSwitch team ]
116 * New upstream version
118 - Support for ipv6 set action.
119 - SKB mark matching and setting.
120 - support for Linux kernels up to 3.8
121 - FreeBSD is now a supported platform, thanks to code contributions from
122 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
123 - ovs-bugtool: New --ovs option to report only OVS related information.
124 - New %t and %T log escapes to identify the subprogram within a
125 cooperating group of processes or threads that emitted a log message.
126 The default log patterns now include this information.
128 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
129 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
130 - Adds support for writing to the metadata field for a flow.
132 - The tunneling code no longer assumes input and output keys are
133 symmetric. If they are not, PMTUD needs to be disabled for
134 tunneling to work. Note this only applies to flow-based keys.
135 - New support for a nonstandard form of GRE that supports a 64-bit key.
136 - Tunnel Path MTU Discovery default value was set to 'disabled'.
137 This feature is deprecated and will be removed soon.
138 - Tunnel header caching removed.
140 - Commands and actions that accept port numbers now also accept keywords
141 that represent those ports (such as LOCAL, NONE, and ALL). This is
142 also the recommended way to specify these ports, for compatibility
143 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
144 for these ports for different purposes).
146 - Support requesting the port number with the "port_no" option in
147 the "add-if" command.
148 - ovs-pki: The "online PKI" features have been removed, along with
149 the ovs-pki-cgi program that facilitated it, because of some
150 alarmist insecurity claims. We do not believe that these claims
151 are true, but because we do not know of any users for this
152 feature it seems better on balance to remove it. (The ovs-pki-cgi
153 program was not included in distribution packaging.)
154 - ovsdb-server now enforces the immutability of immutable columns. This
155 was not enforced in earlier versions due to an oversight.
156 - The following features are now deprecated. They will be removed no
157 earlier than February 2013. Please email dev@openvswitch.org with
159 - Bridge compatibility.
161 - The autopath action.
162 - Interface type "null".
163 - Numeric values for reserved ports (see "ovs-ofctl" note above).
164 - Tunnel Path MTU Discovery.
165 - CAPWAP tunnel support.
166 - The data in the RARP packets can now be matched in the same way as the
169 -- Open vSwitch team <dev@openvswitch.org> Tue, 26 Feb 2013 11:23:19 -0700
171 openvswitch (1.8.0-1) unstable; urgency=low
172 [ Open vSwitch team ]
173 * New upstream version
174 *** Internal only release ***
175 - New FAQ. Please send updates and additions!
176 - Authors of controllers, please read the new section titled "Action
177 Reproduction" in DESIGN, which describes an Open vSwitch change in
178 behavior in corner cases that may affect some controllers.
180 - A new test utility that can create L3 tunnel between two Open
181 vSwitches and detect connectivity issues.
183 - New --sort and --rsort options for "dump-flows" command.
184 - "mod-port" command can now control all OpenFlow config flags.
186 - Allow general bitwise masking for IPv4 and IPv6 addresses in
187 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
189 - Allow support for arbitrary Ethernet masks. (Previously, only
190 the multicast bit in the destination address could be individually
192 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
193 - The OFPST_QUEUE request now reports an error if a specified port or
194 queue does not exist, or for requests for a specific queue on all
195 ports, if the specified queue does not exist on any port. (Previous
196 versions generally reported an empty set of results.)
197 - New "flow monitor" feature to allow controllers to be notified of
198 flow table changes as they happen.
199 - Additional protocols are not mirrored and dropped when forward-bpdu is
200 false. For a full list, see the ovs-vswitchd.conf.db man page.
201 - Open vSwitch now sends RARP packets in situations where it previously
202 sent a custom protocol, making it consistent with behavior of QEMU and
204 - All Open vSwitch programs and log files now show timestamps in UTC,
205 instead the local timezone, by default.
207 -- Open vSwitch team <dev@openvswitch.org> Mon, 16 Jul 2012 16:44:52 +0900
209 openvswitch (1.7.0-1) unstable; urgency=low
210 [ Open vSwitch team ]
211 * New upstream version
212 - kernel modules are renamed. openvswitch_mod.ko is now
213 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
214 - Increased the number of NXM registers to 8.
215 - Added ability to configure dscp setting for manager and controller
216 connections. By default, these connections have a DSCP value of
217 Internetwork Control (0xc0).
218 - Added the granular link health statistics, 'cfm_health', to an
221 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
222 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
225 - Added the "dump-ports-desc" command to retrieve port
226 information using the new port description multipart messages.
228 - Added support for spawning ovs-test server from the client.
229 - Now ovs-test is able to automatically create test bridges and ports.
230 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
231 - Tripled flow setup performance.
232 - The "coverage/log" command previously available through ovs-appctl
233 has been replaced by "coverage/show". The new command replies with
234 coverage counter values, instead of logging them.
236 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jul 2012 17:23:57 +0900
238 openvswitch (1.6.1-1) unstable; urgency=low
239 [ Open vSwitch team ]
240 * New upstream version
241 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
243 -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900
245 openvswitch (1.6.0-1) unstable; urgency=low
246 [ Open vSwitch team ]
247 * New upstream version
249 - LACP bonds no longer fall back to balance-slb when negotiations fail.
250 Instead they drop traffic.
251 - The default bond_mode changed from SLB to active-backup, to protect
252 unsuspecting users from the significant risks of SLB bonds (which are
253 documented in vswitchd/INTERNALS).
254 - Load balancing can be disabled by setting the bond-rebalance-interval
257 - Added support for bitwise matching on TCP and UDP ports.
258 See ovs-ofctl(8) for more information.
259 - NXM flow dumps now include times elapsed toward idle and hard
261 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
262 controllers more precise control over which OpenFlow messages they
263 receive asynchronously.
264 - New "fin_timeout" action.
265 - Added "fin_timeout" support to "learn" action.
266 - The default MAC learning timeout has been increased from 60 seconds
267 to 300 seconds. The MAC learning timeout is now configurable.
268 - When QoS settings for an interface do not configure a default queue
269 (queue 0), Open vSwitch now uses a default configuration for that
270 queue, instead of dropping all packets as in previous versions.
271 - Logging to console and file will have UTC timestamp as a default for all
272 the daemons. An example of the default format is 2012-01-27T16:35:17Z.
273 ovs-appctl can be used to change the default format as before.
274 - New support for limiting the number of flows in an OpenFlow flow
275 table, with configurable policy for evicting flows upon
276 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
277 for more information.
278 - New "enable-async-messages" column in the Controller table. If set to
279 false, OpenFlow connections to the controller will initially have all
280 asynchronous messages disabled, overriding normal OpenFlow behavior.
281 - ofproto-provider interface:
282 - "struct rule" has a new member "used" that ofproto implementations
283 should maintain by updating with ofproto_rule_update_used().
285 - The new option --timestamp causes the "monitor" command to print
286 a timestamp with every update.
287 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
289 -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900
291 openvswitch (1.5.0-1) unstable; urgency=low
292 [ Open vSwitch team ]
293 * New upstream version
295 - Added support for querying, modifying, and deleting flows
296 based on flow cookie when using NXM.
297 - Added new NXM_PACKET_IN format.
299 - Added daemonization support to the monitor and snoop commands.
301 - The "find" command supports new set relational operators
302 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
303 - ovsdb-tool now uses the typical database and schema installation
304 directories as defaults.
306 -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900
308 openvswitch (1.4.0+git20120426-1) unstable; urgency=low
310 * New upstream release fixing the following bugs:
311 o Broken log rotation.
312 o Use-after-free error when ports disappear.
313 o Minor memory leaks.
314 o Testsuite failures on big-endian architectures.
316 -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700
318 openvswitch (1.4.0+git20120321-1) unstable; urgency=low
320 * New upstream version including:
322 - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
323 - vswitchd: Make the MAC entry aging time configurable.
324 - mac-learning: Increase MAC learning timeout to 300 seconds.
326 - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
328 - netlink-socket: Increase Netlink socket receive buffer size.
329 - ofproto: Fix code that keeps track of MTU.
330 - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
331 - bond: Incorrectly reported an error in appctl.
332 - socket-util: Unlink Unix domain sockets that bind but fail to connect.
333 - bridge: Remove unwanted ports at time of ofproto creation.
334 - dpif-linux: Make dpif_linux_port_query_by_name() query only one
336 - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
337 - configure: Try to extract kernel source directory from build Makefile.
338 - vswitchd: Always configure a default queue for QoS.
339 - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
340 - sflow_agent: Use snprintf() in place of sprintf().
342 - Move PKI directory to FHS-compliant location. Closes: #661090.
343 Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
345 - Use a different way to avoid failing install without kernel module.
346 - Avoid unit test failure when doing "unofficial" builds.
347 - Bump standards-version to 3.9.3.
348 - Remove some useless files from the dkms package.
349 - Clean .pyc files in "clean" target.
350 - Remove po-debconf build dependency.
351 - Build-depend on python-all to pull in all Python versions.
352 - Add missing ${python:Depends} to openvswitch-test package.
353 - Improve long descriptions so as to better describe the packages.
354 - Bump debhelper compat level to 8 and make build-depends consistent.
355 - Fix exit status of openvswitch-switch init script "status" command.
356 - Use provided kernel source dir instead of host kernel version.
357 - Do not run "make" if "configure" fails during DKMS build.
358 - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
359 - Fix dependencies for openvswitch-datapath-dkms package.
360 - Don't install Python modules for obsolete Python versions.
361 - Add dependency on ${misc:Depends} to openvswitch-test
362 o Documentation improvements:
363 - ovsdb-doc: Use minus sign in negative numbers in nroff output.
364 - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
366 - ovsdb-doc: Put NAME section into generated manpage.
367 - Fix typo in manpage.
368 - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
369 - netdev: Fix typo in error message.
370 - INSTALL.Linux: minor typo
372 * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
373 of the packaging fixes listed above.
375 * This version fixes most of the lintian errors described in bug
376 #663051, but a few remain, so this upload does not close that bug. I
377 believe that this upload should be suitable for downgrading that bug's
380 -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700
382 openvswitch (1.4.0-2+nmu1) unstable; urgency=low
384 * Non maintainer upload.
385 * Removes all patches in debian/patches, because they are patching stuff
386 inconditionally in debian/*, and this should be applied by default.
387 * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
388 the kernel module builds as expected (Closes: #659685).
390 -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000
392 openvswitch (1.4.0-2) unstable; urgency=low
394 * Use explicit DKMS variable for kernel source directory
395 - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
396 - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
397 - 0001-debian-Use-provided-kernel-source-dir.patch
398 - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
400 * Don't install Python modules for obsolete Python versions
401 - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
403 -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900
405 openvswitch (1.4.0-1) unstable; urgency=low
406 [ Open vSwitch team ]
407 * New upstream version
408 - Compatible with Open vSwitch kernel module included in Linux 3.3.
409 - New "VLAN splinters" feature to work around buggy device drivers
410 in old Linux versions. (This feature is deprecated. When
411 broken device drivers are no longer in widespread use, we will
412 delete this feature.) See ovs-vswitchd.conf.db(5) for more
415 - Added ability to match on IPv6 flow label through NXM.
416 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
417 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
418 - Added ability to modify ECN bits in IPv4.
419 - Added ability to modify TTL in IPv4.
421 - Don't require the "normal" action to use mirrors. Traffic will
422 now be properly mirrored for any flows, regardless of their
424 - Track packet and byte statistics sent on mirrors.
426 - New "fdb/flush" command to flush bridge's MAC learning table.
428 - A new distributed testing tool that allows one to diagnose performance
429 and connectivity issues. This tool currently is not included in RH or
431 - RHEL packaging now supports integration with Red Hat network scripts.
432 - Debian: Depend on python (>= 2.7) | python-argparse instead of
433 python-argparse to avoid pulling in python2.6
436 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jan 2012 23:36:00 +0000
438 openvswitch (1.3.0-1) unstable; urgency=low
439 [ Open vSwitch team ]
440 * New upstream version
442 - Added an OpenFlow extension which allows the "output" action to accept
444 - Added an OpenFlow extension for flexible learning.
445 - Bumped number of NXM registers from four to five.
447 - New "version" command to determine version of running daemon.
448 - If no argument is provided for "cfm/show", displays detailed
449 information about all interfaces with CFM enabled.
450 - If no argument is provided for "lacp/show", displays detailed
451 information about all ports with LACP enabled.
453 - The software switch now supports 255 OpenFlow tables, instead
454 of just one. By default, only table 0 is consulted, but the
455 new NXAST_RESUBMIT_TABLE action can look up in additional
456 tables. Tables 128 and above are reserved for use by the
457 switch itself; please use only tables 0 through 127.
458 - Add support for 802.1D spanning tree (STP).
459 - Fragment handling extensions:
460 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
461 fields are made available for matching in fragments with
463 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
464 via "ip_frag" in ovs-ofctl).
465 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
466 fragment handling policy.
467 - CAPWAP tunneling now supports an extension to transport a 64-key. By
468 default it remains compatible with the old version and other
469 standards-based implementations.
470 - Flow setups are now processed in a round-robin manner across ports
471 to prevent any single client from monopolizing the CPU and conducting
472 a denial of service attack.
473 - Added support for native VLAN tagging. A new "vlan_mode"
474 parameter can be set for "port". Possible values: "access",
475 "trunk", "native-tagged" and "native-untagged".
476 - test-openflowd has been removed. Please use ovs-vswitchd instead.
478 -- Open vSwitch team <dev@openvswitch.org> Mon, 09 Dec 2011 23:36:00 +0000
480 openvswitch (1.2.0-1) unstable; urgency=low
482 [ Open vSwitch team ]
483 * New upstream version
484 - New "ofproto" abstraction layer to ease porting to hardware
486 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
487 - Datapath support for Linux kernels up to 3.0.
489 - New "bundle" and "bundle_load" action extensions.
491 - Implement table unique constraints.
492 - Support cooperative locking between callers.
494 - New "-s" option for "show" command prints packet and byte
495 counters for each port.
497 - New "--readd" option for "replace-flows".
499 - New "show" command to print an overview of configuration.
500 - New "comment" command to add remark that explains intentions.
501 - ovs-brcompatd has been rewritten to fix long-standing bugs.
502 - ovs-openflowd has been renamed test-openflowd and moved into the
503 tests directory. Its presence confused too many users. Please
504 use ovs-vswitchd instead.
505 - New ovs-benchmark utility to test flow setup performance.
506 - A new log level "off" has been added. Configuring a log facility
507 "off" prevents any messages from being logged to it. Previously,
508 "emer" was effectively "off" because no messages were ever logged at
509 level "emer". Now, errors that cause a process to exit are logged
511 - "configure" option --with-l26 has been renamed --with-linux, and
512 --with-l26-source has been renamed --with-linux-source. The old
513 names will be removed after the next release, so please update
515 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
516 datapath/linux-2.6/compat-2.6 directories.
518 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
519 Please use the extensible match extensions instead.
520 - Removed the Maintenance_Point and Monitor tables in an effort
521 to simplify 802.1ag configuration.
522 - Performance and scalability improvements
525 -- Open vSwitch team <dev@openvswitch.org> Wed, 03 Aug 2011 14:43:00 +0000
527 openvswitch (1.1.1-1) unstable; urgency=low
529 [ Open vSwitch team ]
533 * docs: Suppress warning marcro DD not defined
534 (upstream commit 58f870d0)
535 * debian: Make openvswitch depend on Python
536 (upstream commit aa41cb61)
537 * debian: Don't begin openvswitch-pki description with article.
538 (upstream commit bc6bb66)
539 * Debian: Add ${misc:Depends} dependency to python-openvswitch
540 * Debian: Update standards version from 3.9.1 to 3.9.2
541 * Debian: ${source:Version} dependency on python openvswitch
542 * Debian: ${source:Version} dependency for python openvswitch
543 * Switch to dpkg-source 3.0 (quilt) format
544 - For local non-debian/ patches (above)
546 -- Simon Horman <horms@debian.org> Wed, 15 Jun 2011 10:46:15 +0900
548 openvswitch (1.1.0-1) unstable; urgency=low
550 [ Open vSwitch team ]
551 * New upstream version
552 - Ability to define policies over IPv6
555 - Support for extensible match extensions to OpenFlow
557 - Support for HFSC qdisc.
558 - Queue used by in-band control can now be configured.
560 - Kernel<->userspace interface has been reworked and should be
561 close to a stable ABI now.
562 - "Port group" concept has been dropped.
563 - GRE over IPSEC tunnels
565 - New active backup bonding mode.
566 - New L4 hashing support when LACP is enabled.
567 - Source MAC hash now includes VLAN field also.
569 - Greatly improved handling of large flow tables
571 - "show" command now prints full vport configuration.
572 - "dump-groups" command removed since kernel support for
573 port groups was dropped.
575 - New commands for working with the new Managers table.
576 - "list" command enhanced with new formatting options and --columns
578 - "get" command now accepts new --id option.
579 - New "find" command.
581 - New "queue-stats" command for printing queue stats.
582 - New commands "replace-flows" and "diff-flows".
583 - Commands to add and remove flows can now read from files.
584 - New --flow-format option to enable or disable NXM.
585 - New --more option to increase OpenFlow message verbosity.
586 - Removed "tun-cookie" command, which is no longer useful.
587 - ovs-controller enhancements for testing various features.
588 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
589 bugs. New ovs-vlan-bug-workaround command for enabling and
590 disabling a workaround for these driver bugs.
592 - "Resubmit" actions now update flow statistics.
593 - New "register" extension for use in matching and actions, via NXM.
594 - New "multipath" experimental action extension.
595 - New support for matching multicast Ethernet frames, via NXM.
596 - New extension for OpenFlow vendor error codes.
597 - New extension to set the QoS output queue without actually
598 sending to an output port.
599 - Open vSwitch now reports a single flow table, instead of
600 separate hash and wildcard tables. This better models the
601 current implementation.
602 - New experimental "note" action.
603 - New "ofproto/trace" ovs-appctl command and associated utilities
604 to ease debugging complex flow tables.
606 - Schema documentation now includes an entity-relationship diagram.
607 - The database is now garbage collected. In most tables,
608 unreferenced rows will be deleted automatically.
609 - Many tables now include statistics updated periodically by
610 ovs-vswitchd or ovsdb-server.
611 - Every table now has an "external-ids" column for use by OVS
613 - There is no default controller anymore. Each bridge must have its
614 controller individually specified.
615 - The "fail-mode" is now a property of a Bridge instead of a Controller.
616 - New versioning and checksum features.
617 - New Managers table and manager_options column in Open_vSwitch table
618 for specifying managers. The old "managers" column in the
619 Open_vSwitch table has been removed.
620 - Many "name" columns are now immutable.
622 - Dropped support for XenServer pre-5.6.100.
623 - Dropped support for Linux pre-2.6.18.
624 - Dropped controller discovery support.
625 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
626 Statistics reporting in the database is a rough equivalent.
627 - Dropped the "corekeeper" package (now separate, at
628 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
629 - Performance and scalability improvements
633 * Add the following fixes from upstream branch-1.1
634 - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
635 dpif_linux_is_internal_device().
636 - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
638 - 002d4a3 vswitch: Improve schema documentation.
639 - 58bd294 cfm: Fix broken fault logic.
640 - c042664 bridge: Run once before configuring CFM.
641 * Switch to dpkg-source 3.0 (quilt) format
643 -- Simon Horman <horms@debian.org> Wed, 27 Apr 2011 17:11:10 +0900
645 openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low
647 * Git snapshot, including
648 - tests: Fix Y2011 bug in testsuite
651 -- Simon Horman <horms@debian.org> Wed, 12 Jan 2011 08:34:35 +0900
653 openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low
657 -- Simon Horman <horms@debian.org> Thu, 06 Jan 2011 11:11:55 +0900
659 openvswitch (1.1.0~pre2-5) unstable; urgency=low
661 * Open vSwitch only works on Linux so set
662 the Architecture of binary packages to linux-any accordingly
664 -- Simon Horman <horms@debian.org> Tue, 23 Nov 2010 07:55:19 +0900
666 openvswitch (1.1.0~pre2-4) unstable; urgency=low
668 * Add procps to Build-Depends
671 -- Simon Horman <horms@debian.org> Tue, 16 Nov 2010 06:46:17 +0900
673 openvswitch (1.1.0~pre2-3) unstable; urgency=low
675 * Remove the corekeeper package as it isn't strongly related
676 to Open vSwitch. It has subsequently been broken off into
677 a separate source repository and may be uploaded as its
678 own debian source package.
679 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
681 * Avoid the use of long socket names.
682 (closes: #602891, closes: #602911)
684 -- Simon Horman <horms@debian.org> Thu, 11 Nov 2010 06:35:05 +0900
686 openvswitch (1.1.0~pre2-2) unstable; urgency=low
688 * Clarify licensing of files in xenserver/
690 -- Simon Horman <horms@debian.org> Thu, 23 Sep 2010 10:56:18 +0900
692 openvswitch (1.1.0~pre2-1) unstable; urgency=low
694 * New upstream version
697 -- Simon Horman <horms@debian.org> Wed, 15 Sep 2010 18:28:59 +0900
699 openvswitch (1.1.0~pre1-1) unstable; urgency=low
701 * New upstream version
702 - OpenFlow 1.0 slicing (QoS) functionality
703 - Python bindings for configuration database (no write support)
704 - Performance and scalability improvements
707 -- Open vSwitch team <dev@openvswitch.org> Tue, 31 Aug 2010 23:20:00 +0000
709 openvswitch (1.0.1-1) unstable; urgency=low
711 * New upstream version.
713 -- Open vSwitch team <dev@openvswitch.org> Mon, 17 May 2010 10:36:00 +0000