drivers/media/video/bttv-cards.c

   1 /*
   2
   3     bttv-cards.c
   4
   5     this file has configuration informations - card-specific stuff
   6     like the big tvcards array for the most part
   7
   8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; either version 2 of the License, or
  15     (at your option) any later version.
  16
  17     This program is distributed in the hope that it will be useful,
  18     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20     GNU General Public License for more details.
  21
  22     You should have received a copy of the GNU General Public License
  23     along with this program; if not, write to the Free Software
  24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26 */
  27
  28 #include <linux/config.h>
  29 #include <linux/delay.h>
  30 #include <linux/module.h>
  31 #include <linux/moduleparam.h>
  32 #include <linux/kmod.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/firmware.h>
  37
  38 #include <asm/io.h>
  39
  40 #include "bttvp.h"
  41 #include <media/v4l2-common.h>
  42
  43 /* fwd decl */
  44 static void boot_msp34xx(struct bttv *btv, int pin);
  45 static void boot_bt832(struct bttv *btv);
  46 static void hauppauge_eeprom(struct bttv *btv);
  47 static void avermedia_eeprom(struct bttv *btv);
  48 static void osprey_eeprom(struct bttv *btv);
  49 static void modtec_eeprom(struct bttv *btv);
  50 static void init_PXC200(struct bttv *btv);
  51 static void init_RTV24(struct bttv *btv);
  52
  53 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
  54 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
  55 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
  56                                     int set);
  57 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
  58                                       int set);
  59 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
  60 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
  61 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
  62 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
  63 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
  64 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
  65 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
  66 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
  67 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  68 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  69 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  70 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  71 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  72
  73 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  74
  75 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  76 static void picolo_tetra_init(struct bttv *btv);
  77
  78 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  79 static void tibetCS16_init(struct bttv *btv);
  80
  81 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  82 static void kodicom4400r_init(struct bttv *btv);
  83
  84 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  85 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  86
  87 static int terratec_active_radio_upgrade(struct bttv *btv);
  88 static int tea5757_read(struct bttv *btv);
  89 static int tea5757_write(struct bttv *btv, int value);
  90 static void identify_by_eeprom(struct bttv *btv,
  91                                unsigned char eeprom_data[256]);
  92 static int __devinit pvr_boot(struct bttv *btv);
  93
  94 /* config variables */
  95 static unsigned int triton1;
  96 static unsigned int vsfx;
  97 static unsigned int latency = UNSET;
  98 int no_overlay=-1;
  99
 100 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 101 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 102 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 103 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 104 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 105 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 106 #ifdef MODULE
 107 static unsigned int autoload = 1;
 108 #else
 109 static unsigned int autoload;
 110 #endif
 111 static unsigned int gpiomask = UNSET;
 112 static unsigned int audioall = UNSET;
 113 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 114
 115 /* insmod options */
 116 module_param(triton1,    int, 0444);
 117 module_param(vsfx,       int, 0444);
 118 module_param(no_overlay, int, 0444);
 119 module_param(latency,    int, 0444);
 120 module_param(gpiomask,   int, 0444);
 121 module_param(audioall,   int, 0444);
 122 module_param(autoload,   int, 0444);
 123
 124 module_param_array(card,     int, NULL, 0444);
 125 module_param_array(pll,      int, NULL, 0444);
 126 module_param_array(tuner,    int, NULL, 0444);
 127 module_param_array(svhs,     int, NULL, 0444);
 128 module_param_array(remote,   int, NULL, 0444);
 129 module_param_array(audiomux, int, NULL, 0444);
 130
 131 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 132                  "[enable bug compatibility for triton1 + others]");
 133 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 134                  "[yet another chipset flaw workaround]");
 135 MODULE_PARM_DESC(latency,"pci latency timer");
 136 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 137 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 138 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 139 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
 140
 141 /* ----------------------------------------------------------------------- */
 142 /* list of card IDs for bt878+ cards                                       */
 143
 144 static struct CARD {
 145         unsigned id;
 146         int cardnr;
 147         char *name;
 148 } cards[] __devinitdata = {
 149         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 150         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 151         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 152         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 153         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 154         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 155         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 156         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 157         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 158
 159         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 160         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 161
 162         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 163         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 164         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 165         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 166         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 167         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 168         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 169         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 170         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 171
 172         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 173         /* some cards ship with byteswapped IDs ... */
 174         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 175         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 176         /* this seems to happen as well ... */
 177         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 178
 179         { 0x3000121a, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM/ VoodooTV 200" },
 180         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM/ VoodooTV 200" },
 181         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 182
 183         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 184         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 185         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 186         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 187         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 188         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 189         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 190
 191         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 192         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 193         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 194         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 195         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 196
 197         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 198         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 199         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 200         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 201
 202         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 203         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 204         /* clashes with FlyVideo
 205          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 206         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 207         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 208         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 209         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 210
 211         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 212         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 213         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 214         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 215         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 216
 217         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 218         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 219         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 220         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 221         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 222
 223         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 224         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 225         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 226         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 227
 228         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 229         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 230         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 231         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 232
 233         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 234         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 235         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 236         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 237         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 238         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 239         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 240         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 241         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 242         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 243         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 244         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 245         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 246         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 247         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 248         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 249         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 250         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 251         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 252         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 253         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 254         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 255         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 256         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 257         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 258
 259         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 260         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 261
 262         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 263         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 264         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 265         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 266         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 267         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 268
 269         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 270         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 271
 272         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 273         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 274         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 275         { 0x03116000, BTTV_BOARD_SENSORAY311,   "Sensoray 311" },
 276         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 277         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 278         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 279         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 280         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 281         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 282
 283         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 284         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 285
 286         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 287         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 288         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 289         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 290
 291         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 292
 293         /* likely broken, vendor id doesn't match the other magic views ...
 294          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 295
 296         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 297         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 298
 299         /* DVB cards (using pci function .1 for mpeg data xfer) */
 300         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 301         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 302         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 303         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 304         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 305         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 306         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 307         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 308         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 309
 310         { 0, -1, NULL }
 311 };
 312
 313 /* ----------------------------------------------------------------------- */
 314 /* array with description for bt848 / bt878 tv/grabber cards               */
 315
 316 struct tvcard bttv_tvcards[] = {
 317         /* ---- card 0x00 ---------------------------------- */
 318         [BTTV_BOARD_UNKNOWN] = {
 319                 .name           = " *** UNKNOWN/GENERIC *** ",
 320                 .video_inputs   = 4,
 321                 .audio_inputs   = 1,
 322                 .tuner          = 0,
 323                 .svhs           = 2,
 324                 .muxsel         = { 2, 3, 1, 0 },
 325                 .tuner_type     = -1,
 326                 .tuner_addr     = ADDR_UNSET,
 327                 .radio_addr     = ADDR_UNSET,
 328         },
 329         [BTTV_BOARD_MIRO] = {
 330                 .name           = "MIRO PCTV",
 331                 .video_inputs   = 4,
 332                 .audio_inputs   = 1,
 333                 .tuner          = 0,
 334                 .svhs           = 2,
 335                 .gpiomask       = 15,
 336                 .muxsel         = { 2, 3, 1, 1 },
 337                 .audiomux       = { 2, 0, 0, 0, 10 },
 338                 .needs_tvaudio  = 1,
 339                 .tuner_type     = -1,
 340                 .tuner_addr     = ADDR_UNSET,
 341                 .radio_addr     = ADDR_UNSET,
 342         },
 343         [BTTV_BOARD_HAUPPAUGE] = {
 344                 .name           = "Hauppauge (bt848)",
 345                 .video_inputs   = 4,
 346                 .audio_inputs   = 1,
 347                 .tuner          = 0,
 348                 .svhs           = 2,
 349                 .gpiomask       = 7,
 350                 .muxsel         = { 2, 3, 1, 1 },
 351                 .audiomux       = { 0, 1, 2, 3, 4 },
 352                 .needs_tvaudio  = 1,
 353                 .tuner_type     = -1,
 354                 .tuner_addr     = ADDR_UNSET,
 355                 .radio_addr     = ADDR_UNSET,
 356         },
 357         [BTTV_BOARD_STB] = {
 358                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 359                 .video_inputs   = 3,
 360                 .audio_inputs   = 1,
 361                 .tuner          = 0,
 362                 .svhs           = 2,
 363                 .gpiomask       = 7,
 364                 .muxsel         = { 2, 3, 1, 1 },
 365                 .audiomux       = { 4, 0, 2, 3, 1 },
 366                 .no_msp34xx     = 1,
 367                 .needs_tvaudio  = 1,
 368                 .tuner_type     = TUNER_PHILIPS_NTSC,
 369                 .tuner_addr     = ADDR_UNSET,
 370                 .radio_addr     = ADDR_UNSET,
 371                 .pll            = PLL_28,
 372                 .has_radio      = 1,
 373         },
 374
 375         /* ---- card 0x04 ---------------------------------- */
 376         [BTTV_BOARD_INTEL] = {
 377                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 378                 .video_inputs   = 4,
 379                 .audio_inputs   = 0,
 380                 .tuner          = -1,
 381                 .svhs           = 2,
 382                 .gpiomask       = 0,
 383                 .muxsel         = { 2, 3, 1, 1 },
 384                 .audiomux       = { 0 },
 385                 .needs_tvaudio  = 0,
 386                 .tuner_type     = 4,
 387                 .tuner_addr     = ADDR_UNSET,
 388                 .radio_addr     = ADDR_UNSET,
 389         },
 390         [BTTV_BOARD_DIAMOND] = {
 391                 .name           = "Diamond DTV2000",
 392                 .video_inputs   = 4,
 393                 .audio_inputs   = 1,
 394                 .tuner          = 0,
 395                 .svhs           = 2,
 396                 .gpiomask       = 3,
 397                 .muxsel         = { 2, 3, 1, 0 },
 398                 .audiomux       = { 0, 1, 0, 1, 3 },
 399                 .needs_tvaudio  = 1,
 400                 .tuner_type     = -1,
 401                 .tuner_addr     = ADDR_UNSET,
 402                 .radio_addr     = ADDR_UNSET,
 403         },
 404         [BTTV_BOARD_AVERMEDIA] = {
 405                 .name           = "AVerMedia TVPhone",
 406                 .video_inputs   = 3,
 407                 .audio_inputs   = 1,
 408                 .tuner          = 0,
 409                 .svhs           = 3,
 410                 .muxsel         = { 2, 3, 1, 1 },
 411                 .gpiomask       = 0x0f,
 412                 .audiomux       = { 0x0c, 0x04, 0x08, 0x04, 0 },
 413                 /*                0x04 for some cards ?? */
 414                 .needs_tvaudio  = 1,
 415                 .tuner_type     = -1,
 416                 .tuner_addr     = ADDR_UNSET,
 417                 .radio_addr     = ADDR_UNSET,
 418                 .audio_hook     = avermedia_tvphone_audio,
 419                 .has_remote     = 1,
 420         },
 421         [BTTV_BOARD_MATRIX_VISION] = {
 422                 .name           = "MATRIX-Vision MV-Delta",
 423                 .video_inputs   = 5,
 424                 .audio_inputs   = 1,
 425                 .tuner          = -1,
 426                 .svhs           = 3,
 427                 .gpiomask       = 0,
 428                 .muxsel         = { 2, 3, 1, 0, 0 },
 429                 .audiomux       = { 0 },
 430                 .needs_tvaudio  = 1,
 431                 .tuner_type     = -1,
 432                 .tuner_addr     = ADDR_UNSET,
 433                 .radio_addr     = ADDR_UNSET,
 434         },
 435
 436         /* ---- card 0x08 ---------------------------------- */
 437         [BTTV_BOARD_FLYVIDEO] = {
 438                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 439                 .video_inputs   = 4,
 440                 .audio_inputs   = 1,
 441                 .tuner          = 0,
 442                 .svhs           = 2,
 443                 .gpiomask       = 0xc00,
 444                 .muxsel         = { 2, 3, 1, 1 },
 445                 .audiomux       = { 0, 0xc00, 0x800, 0x400, 0xc00, 0 },
 446                 .needs_tvaudio  = 1,
 447                 .pll            = PLL_28,
 448                 .tuner_type     = -1,
 449                 .tuner_addr     = ADDR_UNSET,
 450                 .radio_addr     = ADDR_UNSET,
 451         },
 452         [BTTV_BOARD_TURBOTV] = {
 453                 .name           = "IMS/IXmicro TurboTV",
 454                 .video_inputs   = 3,
 455                 .audio_inputs   = 1,
 456                 .tuner          = 0,
 457                 .svhs           = 2,
 458                 .gpiomask       = 3,
 459                 .muxsel         = { 2, 3, 1, 1 },
 460                 .audiomux       = { 1, 1, 2, 3, 0 },
 461                 .needs_tvaudio  = 0,
 462                 .pll            = PLL_28,
 463                 .tuner_type     = TUNER_TEMIC_PAL,
 464                 .tuner_addr     = ADDR_UNSET,
 465                 .radio_addr     = ADDR_UNSET,
 466         },
 467         [BTTV_BOARD_HAUPPAUGE878] = {
 468                 .name           = "Hauppauge (bt878)",
 469                 .video_inputs   = 4,
 470                 .audio_inputs   = 1,
 471                 .tuner          = 0,
 472                 .svhs           = 2,
 473                 .gpiomask       = 0x0f, /* old: 7 */
 474                 .muxsel         = { 2, 0, 1, 1 },
 475                 .audiomux       = { 0, 1, 2, 3, 4 },
 476                 .needs_tvaudio  = 1,
 477                 .pll            = PLL_28,
 478                 .tuner_type     = -1,
 479                 .tuner_addr     = ADDR_UNSET,
 480                 .radio_addr     = ADDR_UNSET,
 481         },
 482         [BTTV_BOARD_MIROPRO] = {
 483                 .name           = "MIRO PCTV pro",
 484                 .video_inputs   = 3,
 485                 .audio_inputs   = 1,
 486                 .tuner          = 0,
 487                 .svhs           = 2,
 488                 .gpiomask       = 0x3014f,
 489                 .muxsel         = { 2, 3, 1, 1 },
 490                 .audiomux       = { 0x20001,0x10001, 0, 0,10 },
 491                 .needs_tvaudio  = 1,
 492                 .tuner_type     = -1,
 493                 .tuner_addr     = ADDR_UNSET,
 494                 .radio_addr     = ADDR_UNSET,
 495         },
 496
 497         /* ---- card 0x0c ---------------------------------- */
 498         [BTTV_BOARD_ADSTECH_TV] = {
 499                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 500                 .video_inputs   = 3,
 501                 .audio_inputs   = 1,
 502                 .tuner          = 0,
 503                 .svhs           = 2,
 504                 .gpiomask       = 15,
 505                 .muxsel         = { 2, 3, 1, 1 },
 506                 .audiomux       = { 13, 14, 11, 7, 0, 0 },
 507                 .needs_tvaudio  = 1,
 508                 .tuner_type     = -1,
 509                 .tuner_addr     = ADDR_UNSET,
 510                 .radio_addr     = ADDR_UNSET,
 511         },
 512         [BTTV_BOARD_AVERMEDIA98] = {
 513                 .name           = "AVerMedia TVCapture 98",
 514                 .video_inputs   = 3,
 515                 .audio_inputs   = 4,
 516                 .tuner          = 0,
 517                 .svhs           = 2,
 518                 .gpiomask       = 15,
 519                 .muxsel         = { 2, 3, 1, 1 },
 520                 .audiomux       = { 13, 14, 11, 7, 0, 0 },
 521                 .needs_tvaudio  = 1,
 522                 .msp34xx_alt    = 1,
 523                 .pll            = PLL_28,
 524                 .tuner_type     = TUNER_PHILIPS_PAL,
 525                 .tuner_addr     = ADDR_UNSET,
 526                 .radio_addr     = ADDR_UNSET,
 527                 .audio_hook     = avermedia_tv_stereo_audio,
 528                 .no_gpioirq     = 1,
 529         },
 530         [BTTV_BOARD_VHX] = {
 531                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 532                 .video_inputs   = 3,
 533                 .audio_inputs   = 1,
 534                 .tuner          = 0,
 535                 .svhs           = 2,
 536                 .gpiomask       = 7,
 537                 .muxsel         = { 2, 3, 1, 1 },
 538                 .audiomux       = { 0, 2, 1, 3, 4 }, /* old: {0, 1, 2, 3, 4} */
 539                 .needs_tvaudio  = 1,
 540                 .pll            = PLL_28,
 541                 .tuner_type     = -1,
 542                 .tuner_addr     = ADDR_UNSET,
 543                 .radio_addr     = ADDR_UNSET,
 544         },
 545         [BTTV_BOARD_ZOLTRIX] = {
 546                 .name           = "Zoltrix TV-Max",
 547                 .video_inputs   = 3,
 548                 .audio_inputs   = 1,
 549                 .tuner          = 0,
 550                 .svhs           = 2,
 551                 .gpiomask       = 15,
 552                 .muxsel         = { 2, 3, 1, 1 },
 553                 .audiomux       = { 0 , 0, 1 , 0, 10 },
 554                 .needs_tvaudio  = 1,
 555                 .tuner_type     = -1,
 556                 .tuner_addr     = ADDR_UNSET,
 557                 .radio_addr     = ADDR_UNSET,
 558         },
 559
 560         /* ---- card 0x10 ---------------------------------- */
 561         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 562                 .name           = "Prolink Pixelview PlayTV (bt878)",
 563                 .video_inputs   = 3,
 564                 .audio_inputs   = 1,
 565                 .tuner          = 0,
 566                 .svhs           = 2,
 567                 .gpiomask       = 0x01fe00,
 568                 .muxsel         = { 2, 3, 1, 1 },
 569         #if 0
 570                 /* old */
 571                 .audiomux       = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
 572         #else
 573                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 574                 .audiomux       = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
 575         #endif
 576                 .needs_tvaudio  = 1,
 577                 .pll            = PLL_28,
 578                 .tuner_type     = -1,
 579         },
 580         [BTTV_BOARD_WINVIEW_601] = {
 581                 .name           = "Leadtek WinView 601",
 582                 .video_inputs   = 3,
 583                 .audio_inputs   = 1,
 584                 .tuner          = 0,
 585                 .svhs           = 2,
 586                 .gpiomask       = 0x8300f8,
 587                 .muxsel         = { 2, 3, 1, 1,0 },
 588                 .audiomux       = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007 },
 589                 .needs_tvaudio  = 1,
 590                 .tuner_type     = -1,
 591                 .tuner_addr     = ADDR_UNSET,
 592                 .radio_addr     = ADDR_UNSET,
 593                 .audio_hook     = winview_audio,
 594                 .has_radio      = 1,
 595         },
 596         [BTTV_BOARD_AVEC_INTERCAP] = {
 597                 .name           = "AVEC Intercapture",
 598                 .video_inputs   = 3,
 599                 .audio_inputs   = 2,
 600                 .tuner          = 0,
 601                 .svhs           = 2,
 602                 .gpiomask       = 0,
 603                 .muxsel         = { 2, 3, 1, 1 },
 604                 .audiomux       = { 1, 0, 0, 0, 0 },
 605                 .needs_tvaudio  = 1,
 606                 .tuner_type     = -1,
 607                 .tuner_addr     = ADDR_UNSET,
 608                 .radio_addr     = ADDR_UNSET,
 609         },
 610         [BTTV_BOARD_LIFE_FLYKIT] = {
 611                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 612                 .video_inputs   = 4,
 613                 .audio_inputs   = 1,
 614                 .tuner          = -1,
 615                 .svhs           = -1,
 616                 .gpiomask       = 0x8dff00,
 617                 .muxsel         = { 2, 3, 1, 1 },
 618                 .audiomux       = { 0 },
 619                 .no_msp34xx     = 1,
 620                 .tuner_type     = -1,
 621                 .tuner_addr     = ADDR_UNSET,
 622                 .radio_addr     = ADDR_UNSET,
 623         },
 624
 625         /* ---- card 0x14 ---------------------------------- */
 626         [BTTV_BOARD_CEI_RAFFLES] = {
 627                 .name           = "CEI Raffles Card",
 628                 .video_inputs   = 3,
 629                 .audio_inputs   = 3,
 630                 .tuner          = 0,
 631                 .svhs           = 2,
 632                 .muxsel         = { 2, 3, 1, 1 },
 633                 .tuner_type     = -1,
 634                 .tuner_addr     = ADDR_UNSET,
 635                 .radio_addr     = ADDR_UNSET,
 636         },
 637         [BTTV_BOARD_CONFERENCETV] = {
 638                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 639                 .video_inputs   = 4,
 640                 .audio_inputs   = 2,  /* tuner, line in */
 641                 .tuner          = 0,
 642                 .svhs           = 2,
 643                 .gpiomask       = 0x1800,
 644                 .muxsel         = { 2, 3, 1, 1 },
 645                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800 },
 646                 .pll            = PLL_28,
 647                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 648                 .tuner_addr     = ADDR_UNSET,
 649                 .radio_addr     = ADDR_UNSET,
 650         },
 651         [BTTV_BOARD_PHOEBE_TVMAS] = {
 652                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 653                 .video_inputs   = 3,
 654                 .audio_inputs   = 1,
 655                 .tuner          = 0,
 656                 .svhs           = 2,
 657                 .gpiomask       = 0xc00,
 658                 .muxsel         = { 2, 3, 1, 1 },
 659                 .audiomux       = { 0, 1, 0x800, 0x400, 0xc00, 0 },
 660                 .needs_tvaudio  = 1,
 661                 .pll            = PLL_28,
 662                 .tuner_type     = -1,
 663                 .tuner_addr     = ADDR_UNSET,
 664                 .radio_addr     = ADDR_UNSET,
 665         },
 666         [BTTV_BOARD_MODTEC_205] = {
 667                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 668                 .video_inputs   = 3,
 669                 .audio_inputs   = 1,
 670                 .tuner          = 0,
 671                 .svhs           = -1,
 672                 .gpiomask       = 7,
 673                 .muxsel         = { 2, 3, -1 },
 674                 .digital_mode   = DIGITAL_MODE_CAMERA,
 675                 .audiomux       = { 0, 0, 0, 0, 0 },
 676                 .no_msp34xx     = 1,
 677                 .pll            = PLL_28,
 678                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 679                 .tuner_addr     = ADDR_UNSET,
 680                 .radio_addr     = ADDR_UNSET,
 681         },
 682
 683         /* ---- card 0x18 ---------------------------------- */
 684         [BTTV_BOARD_MAGICTVIEW061] = {
 685                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 686                 .video_inputs   = 3,
 687                 .audio_inputs   = 1,
 688                 .tuner          = 0,
 689                 .svhs           = 2,
 690                 .gpiomask       = 0xe00,
 691                 .muxsel         = { 2, 3, 1, 1 },
 692                 .audiomux       = {0x400, 0x400, 0x400, 0x400, 0xc00 },
 693                 .needs_tvaudio  = 1,
 694                 .pll            = PLL_28,
 695                 .tuner_type     = -1,
 696                 .tuner_addr     = ADDR_UNSET,
 697                 .radio_addr     = ADDR_UNSET,
 698                 .has_remote     = 1,
 699         },
 700         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 701                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 702                 .video_inputs   = 3,
 703                 .audio_inputs   = 1,
 704                 .tuner          = 0,
 705                 .svhs           = 2,
 706                 .gpiomask       = 0x1f0fff,
 707                 .muxsel         = { 2, 3, 1, 1 },
 708                 .audiomux       = { 0x20000, 0x30000, 0x10000, 0, 0x40000 },
 709                 .needs_tvaudio  = 0,
 710                 .tuner_type     = TUNER_PHILIPS_PAL,
 711                 .tuner_addr     = ADDR_UNSET,
 712                 .radio_addr     = ADDR_UNSET,
 713                 .audio_hook     = terratv_audio,
 714         },
 715         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 716                 .name           = "Hauppauge WinCam newer (bt878)",
 717                 .video_inputs   = 4,
 718                 .audio_inputs   = 1,
 719                 .tuner          = 0,
 720                 .svhs           = 3,
 721                 .gpiomask       = 7,
 722                 .muxsel         = { 2, 0, 1, 1 },
 723                 .audiomux       = { 0, 1, 2, 3, 4 },
 724                 .needs_tvaudio  = 1,
 725                 .tuner_type     = -1,
 726                 .tuner_addr     = ADDR_UNSET,
 727                 .radio_addr     = ADDR_UNSET,
 728         },
 729         [BTTV_BOARD_MAXI] = {
 730                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 731                 .video_inputs   = 4,
 732                 .audio_inputs   = 2,
 733                 .tuner          = 0,
 734                 .svhs           = 2,
 735                 .gpiomask       = 0x1800,
 736                 .muxsel         = { 2, 3, 1, 1 },
 737                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800 },
 738                 .pll            = PLL_28,
 739                 .tuner_type     = TUNER_PHILIPS_SECAM,
 740                 .tuner_addr     = ADDR_UNSET,
 741                 .radio_addr     = ADDR_UNSET,
 742         },
 743
 744         /* ---- card 0x1c ---------------------------------- */
 745         [BTTV_BOARD_TERRATV] = {
 746                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 747                 .video_inputs   = 3,
 748                 .audio_inputs   = 1,
 749                 .tuner          = 0,
 750                 .svhs           = 2,
 751                 .gpiomask       = 0x1f0fff,
 752                 .muxsel         = { 2, 3, 1, 1 },
 753                 .audiomux       = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000 },
 754                 .needs_tvaudio  = 0,
 755                 .tuner_type     = TUNER_PHILIPS_PAL,
 756                 .tuner_addr     = ADDR_UNSET,
 757                 .radio_addr     = ADDR_UNSET,
 758                 .audio_hook     = terratv_audio,
 759                 /* GPIO wiring:
 760                 External 20 pin connector (for Active Radio Upgrade board)
 761                 gpio00: i2c-sda
 762                 gpio01: i2c-scl
 763                 gpio02: om5610-data
 764                 gpio03: om5610-clk
 765                 gpio04: om5610-wre
 766                 gpio05: om5610-stereo
 767                 gpio06: rds6588-davn
 768                 gpio07: Pin 7 n.c.
 769                 gpio08: nIOW
 770                 gpio09+10: nIOR, nSEL ?? (bt878)
 771                         gpio09: nIOR (bt848)
 772                         gpio10: nSEL (bt848)
 773                 Sound Routing:
 774                 gpio16: u2-A0 (1st 4052bt)
 775                 gpio17: u2-A1
 776                 gpio18: u2-nEN
 777                 gpio19: u4-A0 (2nd 4052)
 778                 gpio20: u4-A1
 779                         u4-nEN - GND
 780                 Btspy:
 781                         00000 : Cdrom (internal audio input)
 782                         10000 : ext. Video audio input
 783                         20000 : TV Mono
 784                         a0000 : TV Mono/2
 785                 1a0000 : TV Stereo
 786                         30000 : Radio
 787                         40000 : Mute
 788         */
 789
 790         },
 791         [BTTV_BOARD_PXC200] = {
 792                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 793                 .name           = "Imagenation PXC200",
 794                 .video_inputs   = 5,
 795                 .audio_inputs   = 1,
 796                 .tuner          = -1,
 797                 .svhs           = 1, /* was: 4 */
 798                 .gpiomask       = 0,
 799                 .muxsel         = { 2, 3, 1, 0, 0},
 800                 .audiomux       = { 0 },
 801                 .needs_tvaudio  = 1,
 802                 .tuner_type     = -1,
 803                 .tuner_addr     = ADDR_UNSET,
 804                 .radio_addr     = ADDR_UNSET,
 805                 .muxsel_hook    = PXC200_muxsel,
 806
 807         },
 808         [BTTV_BOARD_FLYVIDEO_98] = {
 809                 .name           = "Lifeview FlyVideo 98 LR50",
 810                 .video_inputs   = 4,
 811                 .audio_inputs   = 1,
 812                 .tuner          = 0,
 813                 .svhs           = 2,
 814                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 815                 .muxsel         = { 2, 3, 1, 1 },
 816                 .audiomux       = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
 817                 .pll            = PLL_28,
 818                 .tuner_type     = -1,
 819                 .tuner_addr     = ADDR_UNSET,
 820                 .radio_addr     = ADDR_UNSET,
 821         },
 822         [BTTV_BOARD_IPROTV] = {
 823                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 824                 .video_inputs   = 4,
 825                 .audio_inputs   = 1,
 826                 .tuner          = 0,
 827                 .svhs           = 3,
 828                 .gpiomask       = 1,
 829                 .muxsel         = { 2, 3, 1, 1 },
 830                 .audiomux       = { 1, 0, 0, 0, 0 },
 831                 .pll            = PLL_28,
 832                 .tuner_type     = TUNER_PHILIPS_PAL,
 833                 .tuner_addr     = ADDR_UNSET,
 834                 .radio_addr     = ADDR_UNSET,
 835         },
 836
 837         /* ---- card 0x20 ---------------------------------- */
 838         [BTTV_BOARD_INTEL_C_S_PCI] = {
 839                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 840                 .video_inputs   = 4,
 841                 .audio_inputs   = 0,
 842                 .tuner          = -1,
 843                 .svhs           = 2,
 844                 .gpiomask       = 0,
 845                 .muxsel         = { 2, 3, 1, 1 },
 846                 .audiomux       = { 0 },
 847                 .needs_tvaudio  = 0,
 848                 .tuner_type     = 4,
 849                 .tuner_addr     = ADDR_UNSET,
 850                 .radio_addr     = ADDR_UNSET,
 851         },
 852         [BTTV_BOARD_TERRATVALUE] = {
 853                 .name           = "Terratec TerraTValue Version Bt878",
 854                 .video_inputs   = 3,
 855                 .audio_inputs   = 1,
 856                 .tuner          = 0,
 857                 .svhs           = 2,
 858                 .gpiomask       = 0xffff00,
 859                 .muxsel         = { 2, 3, 1, 1 },
 860                 .audiomux       = { 0x500, 0, 0x300, 0x900, 0x900 },
 861                 .needs_tvaudio  = 1,
 862                 .pll            = PLL_28,
 863                 .tuner_type     = TUNER_PHILIPS_PAL,
 864                 .tuner_addr     = ADDR_UNSET,
 865                 .radio_addr     = ADDR_UNSET,
 866         },
 867         [BTTV_BOARD_WINFAST2000] = {
 868                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 869                 .video_inputs   = 4,
 870                 .audio_inputs   = 1,
 871                 .tuner          = 0,
 872                 .svhs           = 2,
 873                 .muxsel         = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
 874         #if 0
 875                 .gpiomask       = 0xc33000,
 876                 .audiomux       = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
 877         #else
 878                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 879                 .gpiomask       = 0xb33000,
 880                 .audiomux       = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
 881         #endif
 882                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 883                         gpio23 -- hef4052:nEnable (0x800000)
 884                         gpio12 -- hef4052:A1
 885                         gpio13 -- hef4052:A0
 886                 0x0000: external audio
 887                 0x1000: FM
 888                 0x2000: TV
 889                 0x3000: n.c.
 890                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 891                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 892                 */
 893                 .needs_tvaudio  = 0,
 894                 .pll            = PLL_28,
 895                 .has_radio      = 1,
 896                 .tuner_type     = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 897                 .tuner_addr     = ADDR_UNSET,
 898                 .radio_addr     = ADDR_UNSET,
 899                 .audio_hook     = winfast2000_audio,
 900                 .has_remote     = 1,
 901         },
 902         [BTTV_BOARD_CHRONOS_VS2] = {
 903                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 904                 .video_inputs   = 4,
 905                 .audio_inputs   = 3,
 906                 .tuner          = 0,
 907                 .svhs           = 2,
 908                 .gpiomask       = 0x1800,
 909                 .muxsel         = { 2, 3, 1, 1 },
 910                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800 },
 911                 .pll            = PLL_28,
 912                 .tuner_type     = -1,
 913                 .tuner_addr     = ADDR_UNSET,
 914                 .radio_addr     = ADDR_UNSET,
 915         },
 916
 917         /* ---- card 0x24 ---------------------------------- */
 918         [BTTV_BOARD_TYPHOON_TVIEW] = {
 919                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 920                 .video_inputs   = 4,
 921                 .audio_inputs   = 3,
 922                 .tuner          = 0,
 923                 .svhs           = 2,
 924                 .gpiomask       = 0x1800,
 925                 .muxsel         = { 2, 3, 1, 1 },
 926                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
 927                 .pll            = PLL_28,
 928                 .tuner_type     = -1,
 929                 .tuner_addr     = ADDR_UNSET,
 930                 .radio_addr     = ADDR_UNSET,
 931                 .has_radio      = 1,
 932         },
 933         [BTTV_BOARD_PXELVWPLTVPRO] = {
 934                 .name           = "Prolink PixelView PlayTV pro",
 935                 .video_inputs   = 3,
 936                 .audio_inputs   = 1,
 937                 .tuner          = 0,
 938                 .svhs           = 2,
 939                 .gpiomask       = 0xff,
 940                 .muxsel         = { 2, 3, 1, 1 },
 941                 .audiomux       = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
 942                 .no_msp34xx     = 1,
 943                 .pll            = PLL_28,
 944                 .tuner_type     = -1,
 945                 .tuner_addr     = ADDR_UNSET,
 946                 .radio_addr     = ADDR_UNSET,
 947         },
 948         [BTTV_BOARD_MAGICTVIEW063] = {
 949                 .name           = "Askey CPH06X TView99",
 950                 .video_inputs   = 4,
 951                 .audio_inputs   = 1,
 952                 .tuner          = 0,
 953                 .svhs           = 2,
 954                 .gpiomask       = 0x551e00,
 955                 .muxsel         = { 2, 3, 1, 0 },
 956                 .audiomux       = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
 957                 .needs_tvaudio  = 1,
 958                 .pll            = PLL_28,
 959                 .tuner_type     = 1,
 960                 .tuner_addr     = ADDR_UNSET,
 961                 .radio_addr     = ADDR_UNSET,
 962                 .has_remote     = 1,
 963         },
 964         [BTTV_BOARD_PINNACLE] = {
 965                 .name           = "Pinnacle PCTV Studio/Rave",
 966                 .video_inputs   = 3,
 967                 .audio_inputs   = 1,
 968                 .tuner          = 0,
 969                 .svhs           = 2,
 970                 .gpiomask       = 0x03000F,
 971                 .muxsel         = { 2, 3, 1, 1 },
 972                 .audiomux       = { 2, 0xd0001, 0, 0, 1 },
 973                 .needs_tvaudio  = 0,
 974                 .pll            = PLL_28,
 975                 .tuner_type     = -1,
 976                 .tuner_addr     = ADDR_UNSET,
 977                 .radio_addr     = ADDR_UNSET,
 978         },
 979
 980         /* ---- card 0x28 ---------------------------------- */
 981         [BTTV_BOARD_STB2] = {
 982                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 983                 .video_inputs   = 3,
 984                 .audio_inputs   = 1,
 985                 .tuner          = 0,
 986                 .svhs           = 2,
 987                 .gpiomask       = 7,
 988                 .muxsel         = { 2, 3, 1, 1 },
 989                 .audiomux       = { 4, 0, 2, 3, 1 },
 990                 .no_msp34xx     = 1,
 991                 .needs_tvaudio  = 1,
 992                 .tuner_type     = TUNER_PHILIPS_NTSC,
 993                 .tuner_addr     = ADDR_UNSET,
 994                 .radio_addr     = ADDR_UNSET,
 995                 .pll            = PLL_28,
 996                 .has_radio      = 1,
 997         },
 998         [BTTV_BOARD_AVPHONE98] = {
 999                 .name           = "AVerMedia TVPhone 98",
1000                 .video_inputs   = 3,
1001                 .audio_inputs   = 4,
1002                 .tuner          = 0,
1003                 .svhs           = 2,
1004                 .gpiomask       = 15,
1005                 .muxsel         = { 2, 3, 1, 1 },
1006                 .audiomux       = { 13, 4, 11, 7, 0, 0 },
1007                 .needs_tvaudio  = 1,
1008                 .pll            = PLL_28,
1009                 .tuner_type     = -1,
1010                 .tuner_addr     = ADDR_UNSET,
1011                 .radio_addr     = ADDR_UNSET,
1012                 .has_radio      = 1,
1013                 .audio_hook     = avermedia_tvphone_audio,
1014         },
1015         [BTTV_BOARD_PV951] = {
1016                 .name           = "ProVideo PV951", /* pic16c54 */
1017                 .video_inputs   = 3,
1018                 .audio_inputs   = 1,
1019                 .tuner          = 0,
1020                 .svhs           = 2,
1021                 .gpiomask       = 0,
1022                 .muxsel         = { 2, 3, 1, 1},
1023                 .audiomux       = { 0, 0, 0, 0, 0},
1024                 .needs_tvaudio  = 1,
1025                 .no_msp34xx     = 1,
1026                 .pll            = PLL_28,
1027                 .tuner_type     = 1,
1028                 .tuner_addr     = ADDR_UNSET,
1029                 .radio_addr     = ADDR_UNSET,
1030         },
1031         [BTTV_BOARD_ONAIR_TV] = {
1032                 .name           = "Little OnAir TV",
1033                 .video_inputs   = 3,
1034                 .audio_inputs   = 1,
1035                 .tuner          = 0,
1036                 .svhs           = 2,
1037                 .gpiomask       = 0xe00b,
1038                 .muxsel         = { 2, 3, 1, 1 },
1039                 .audiomux       = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc },
1040                 .no_msp34xx     = 1,
1041                 .tuner_type     = -1,
1042                 .tuner_addr     = ADDR_UNSET,
1043                 .radio_addr     = ADDR_UNSET,
1044         },
1045
1046         /* ---- card 0x2c ---------------------------------- */
1047         [BTTV_BOARD_SIGMA_TVII_FM] = {
1048                 .name           = "Sigma TVII-FM",
1049                 .video_inputs   = 2,
1050                 .audio_inputs   = 1,
1051                 .tuner          = 0,
1052                 .svhs           = -1,
1053                 .gpiomask       = 3,
1054                 .muxsel         = { 2, 3, 1, 1 },
1055                 .audiomux       = { 1, 1, 0, 2, 3 },
1056                 .no_msp34xx     = 1,
1057                 .pll            = PLL_NONE,
1058                 .tuner_type     = -1,
1059                 .tuner_addr     = ADDR_UNSET,
1060                 .radio_addr     = ADDR_UNSET,
1061         },
1062         [BTTV_BOARD_MATRIX_VISION2] = {
1063                 .name           = "MATRIX-Vision MV-Delta 2",
1064                 .video_inputs   = 5,
1065                 .audio_inputs   = 1,
1066                 .tuner          = -1,
1067                 .svhs           = 3,
1068                 .gpiomask       = 0,
1069                 .muxsel         = { 2, 3, 1, 0, 0 },
1070                 .audiomux       = { 0 },
1071                 .no_msp34xx     = 1,
1072                 .pll            = PLL_28,
1073                 .tuner_type     = -1,
1074                 .tuner_addr     = ADDR_UNSET,
1075                 .radio_addr     = ADDR_UNSET,
1076         },
1077         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1078                 .name           = "Zoltrix Genie TV/FM",
1079                 .video_inputs   = 3,
1080                 .audio_inputs   = 1,
1081                 .tuner          = 0,
1082                 .svhs           = 2,
1083                 .gpiomask       = 0xbcf03f,
1084                 .muxsel         = { 2, 3, 1, 1 },
1085                 .audiomux       = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f },
1086                 .no_msp34xx     = 1,
1087                 .pll            = PLL_28,
1088                 .tuner_type     = 21,
1089                 .tuner_addr     = ADDR_UNSET,
1090                 .radio_addr     = ADDR_UNSET,
1091         },
1092         [BTTV_BOARD_TERRATVRADIO] = {
1093                 .name           = "Terratec TV/Radio+",
1094                 .video_inputs   = 3,
1095                 .audio_inputs   = 1,
1096                 .tuner          = 0,
1097                 .svhs           = 2,
1098                 .gpiomask       = 0x70000,
1099                 .muxsel         = { 2, 3, 1, 1 },
1100                 .audiomux       = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
1101                 .needs_tvaudio  = 1,
1102                 .no_msp34xx     = 1,
1103                 .pll            = PLL_35,
1104                 .tuner_type     = 1,
1105                 .tuner_addr     = ADDR_UNSET,
1106                 .radio_addr     = ADDR_UNSET,
1107                 .has_radio      = 1,
1108         },
1109
1110         /* ---- card 0x30 ---------------------------------- */
1111         [BTTV_BOARD_DYNALINK] = {
1112                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1113                 .video_inputs   = 3,
1114                 .audio_inputs   = 1,
1115                 .tuner          = 0,
1116                 .svhs           = 2,
1117                 .gpiomask       = 15,
1118                 .muxsel         = { 2, 3, 1, 1 },
1119                 .audiomux       = {2,0,0,0,1 },
1120                 .needs_tvaudio  = 1,
1121                 .pll            = PLL_28,
1122                 .tuner_type     = -1,
1123                 .tuner_addr     = ADDR_UNSET,
1124                 .radio_addr     = ADDR_UNSET,
1125         },
1126         [BTTV_BOARD_GVBCTV3PCI] = {
1127                 .name           = "IODATA GV-BCTV3/PCI",
1128                 .video_inputs   = 3,
1129                 .audio_inputs   = 1,
1130                 .tuner          = 0,
1131                 .svhs           = 2,
1132                 .gpiomask       = 0x010f00,
1133                 .muxsel         = {2, 3, 0, 0 },
1134                 .audiomux       = {0x10000, 0, 0x10000, 0, 0, 0 },
1135                 .no_msp34xx     = 1,
1136                 .pll            = PLL_28,
1137                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1138                 .tuner_addr     = ADDR_UNSET,
1139                 .radio_addr     = ADDR_UNSET,
1140                 .audio_hook     = gvbctv3pci_audio,
1141         },
1142         [BTTV_BOARD_PXELVWPLTVPAK] = {
1143                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1144                 .video_inputs   = 5,
1145                 .audio_inputs   = 1,
1146                 .tuner          = 0,
1147                 .svhs           = 3,
1148                 .gpiomask       = 0xAA0000,
1149                 .muxsel         = { 2,3,1,1,-1 },
1150                 .digital_mode   = DIGITAL_MODE_CAMERA,
1151                 .audiomux       = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000  },
1152                 .no_msp34xx     = 1,
1153                 .pll            = PLL_28,
1154                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1155                 .tuner_addr     = ADDR_UNSET,
1156                 .radio_addr     = ADDR_UNSET,
1157                 .has_remote     = 1,
1158                 /* GPIO wiring: (different from Rev.4C !)
1159                         GPIO17: U4.A0 (first hef4052bt)
1160                         GPIO19: U4.A1
1161                         GPIO20: U5.A1 (second hef4052bt)
1162                         GPIO21: U4.nEN
1163                         GPIO22: BT832 Reset Line
1164                         GPIO23: A5,A0, U5,nEN
1165                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1166                 */
1167         },
1168         [BTTV_BOARD_EAGLE] = {
1169                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1170                 .video_inputs   = 4,
1171                 .audio_inputs   = 1,
1172                 .tuner          = 0,
1173                 .svhs           = 2,
1174                 .gpiomask       = 7,
1175                 .muxsel         = { 2, 0, 1, 1 },
1176                 .audiomux       = { 0, 1, 2, 3, 4 },
1177                 .pll            = PLL_28,
1178                 .tuner_type     = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1179                 .tuner_addr     = ADDR_UNSET,
1180                 .radio_addr     = ADDR_UNSET,
1181         },
1182
1183         /* ---- card 0x34 ---------------------------------- */
1184         [BTTV_BOARD_PINNACLEPRO] = {
1185                 /* David Härdeman <david@2gen.com> */
1186                 .name           = "Pinnacle PCTV Studio Pro",
1187                 .video_inputs   = 4,
1188                 .audio_inputs   = 1,
1189                 .tuner          = 0,
1190                 .svhs           = 3,
1191                 .gpiomask       = 0x03000F,
1192                 .muxsel         = { 2, 3, 1, 1 },
1193                 .audiomux       = { 1, 0xd0001, 0, 0, 10 },
1194                                 /* sound path (5 sources):
1195                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1196                                         0= ext. Audio IN
1197                                         1= from MUX2
1198                                         2= Mono TV sound from Tuner
1199                                         3= not connected
1200                                 MUX2 (mask 0x30000):
1201                                         0,2,3= from MSP34xx
1202                                         1= FM stereo Radio from Tuner */
1203                 .needs_tvaudio  = 0,
1204                 .pll            = PLL_28,
1205                 .tuner_type     = -1,
1206                 .tuner_addr     = ADDR_UNSET,
1207                 .radio_addr     = ADDR_UNSET,
1208         },
1209         [BTTV_BOARD_TVIEW_RDS_FM] = {
1210                 /* Claas Langbehn <claas@bigfoot.com>,
1211                 Sven Grothklags <sven@upb.de> */
1212                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1213                 .video_inputs   = 4,
1214                 .audio_inputs   = 3,
1215                 .tuner          = 0,
1216                 .svhs           = 2,
1217                 .gpiomask       = 0x1c,
1218                 .muxsel         = { 2, 3, 1, 1 },
1219                 .audiomux       = { 0, 0, 0x10, 8, 4 },
1220                 .needs_tvaudio  = 1,
1221                 .pll            = PLL_28,
1222                 .tuner_type     = TUNER_PHILIPS_PAL,
1223                 .tuner_addr     = ADDR_UNSET,
1224                 .radio_addr     = ADDR_UNSET,
1225                 .has_radio      = 1,
1226         },
1227         [BTTV_BOARD_LIFETEC_9415] = {
1228                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1229                 in de.comp.os.unix.linux.hardware:
1230                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1231                         audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1232                         options tuner type=5 */
1233                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1234                 .video_inputs   = 4,
1235                 .audio_inputs   = 1,
1236                 .tuner          = 0,
1237                 .svhs           = 2,
1238                 .gpiomask       = 0x18e0,
1239                 .muxsel         = { 2, 3, 1, 1 },
1240                 .audiomux       = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1241                         /* For cards with tda9820/tda9821:
1242                                 0x0000: Tuner normal stereo
1243                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1244                                 0x0880: Tuner A2 stereo */
1245                 .pll            = PLL_28,
1246                 .tuner_type     = -1,
1247                 .tuner_addr     = ADDR_UNSET,
1248                 .radio_addr     = ADDR_UNSET,
1249         },
1250         [BTTV_BOARD_BESTBUY_EASYTV] = {
1251                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1252                 old Easy TV BT848 version (model CPH031) */
1253                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1254                 .video_inputs   = 4,
1255                 .audio_inputs   = 1,
1256                 .tuner          = 0,
1257                 .svhs           = 2,
1258                 .gpiomask       = 0xF,
1259                 .muxsel         = { 2, 3, 1, 0 },
1260                 .audiomux       = { 2, 0, 0, 0, 10 },
1261                 .needs_tvaudio  = 0,
1262                 .pll            = PLL_28,
1263                 .tuner_type     = TUNER_TEMIC_PAL,
1264                 .tuner_addr     = ADDR_UNSET,
1265                 .radio_addr     = ADDR_UNSET,
1266         },
1267
1268         /* ---- card 0x38 ---------------------------------- */
1269         [BTTV_BOARD_FLYVIDEO_98FM] = {
1270                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1271                 .name           = "Lifeview FlyVideo 98FM LR50",
1272                 .video_inputs   = 4,
1273                 .audio_inputs   = 3,
1274                 .tuner          = 0,
1275                 .svhs           = 2,
1276                 .gpiomask       = 0x1800,
1277                 .muxsel         = { 2, 3, 1, 1 },
1278                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1279                 .pll            = PLL_28,
1280                 .tuner_type     = 5,
1281                 .tuner_addr     = ADDR_UNSET,
1282                 .radio_addr     = ADDR_UNSET,
1283         },
1284                 /* This is the ultimate cheapo capture card
1285                 * just a BT848A on a small PCB!
1286                 * Steve Hosgood <steve@equiinet.com> */
1287         [BTTV_BOARD_GRANDTEC] = {
1288                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1289                 .video_inputs   = 2,
1290                 .audio_inputs   = 0,
1291                 .tuner          = -1,
1292                 .svhs           = 1,
1293                 .gpiomask       = 0,
1294                 .muxsel         = { 3, 1 },
1295                 .audiomux       = { 0 },
1296                 .needs_tvaudio  = 0,
1297                 .no_msp34xx     = 1,
1298                 .pll            = PLL_35,
1299                 .tuner_type     = -1,
1300                 .tuner_addr     = ADDR_UNSET,
1301                 .radio_addr     = ADDR_UNSET,
1302         },
1303         [BTTV_BOARD_ASKEY_CPH060] = {
1304                 /* Daniel Herrington <daniel.herrington@home.com> */
1305                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1306                 .video_inputs   = 3,
1307                 .audio_inputs   = 1,
1308                 .tuner          = 0,
1309                 .svhs           = 2,
1310                 .gpiomask       = 0xe00,
1311                 .muxsel         = { 2, 3, 1, 1},
1312                 .audiomux       = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1313                 .needs_tvaudio  = 1,
1314                 .pll            = PLL_28,
1315                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1316                 .tuner_addr     = ADDR_UNSET,
1317                 .radio_addr     = ADDR_UNSET,
1318         },
1319         [BTTV_BOARD_ASKEY_CPH03X] = {
1320                 /* Matti Mottus <mottus@physic.ut.ee> */
1321                 .name           = "Askey CPH03x TV Capturer",
1322                 .video_inputs   = 4,
1323                 .audio_inputs   = 1,
1324                 .tuner          = 0,
1325                 .svhs           = 2,
1326                 .gpiomask       = 0x03000F,
1327                 .muxsel         = { 2, 3, 1, 0 },
1328                 .audiomux       = { 2, 0, 0, 0, 1 },
1329                 .pll            = PLL_28,
1330                 .tuner_type     = 0,
1331                 .tuner_addr     = ADDR_UNSET,
1332                 .radio_addr     = ADDR_UNSET,
1333         },
1334
1335         /* ---- card 0x3c ---------------------------------- */
1336         [BTTV_BOARD_MM100PCTV] = {
1337                 /* Philip Blundell <philb@gnu.org> */
1338                 .name           = "Modular Technology MM100PCTV",
1339                 .video_inputs   = 2,
1340                 .audio_inputs   = 2,
1341                 .tuner          = 0,
1342                 .svhs           = -1,
1343                 .gpiomask       = 11,
1344                 .muxsel         = { 2, 3, 1, 1 },
1345                 .audiomux       = { 2, 0, 0, 1, 8 },
1346                 .pll            = PLL_35,
1347                 .tuner_type     = TUNER_TEMIC_PAL,
1348                 .tuner_addr     = ADDR_UNSET,
1349                 .radio_addr     = ADDR_UNSET,
1350         },
1351         [BTTV_BOARD_GMV1] = {
1352                 /* Adrian Cox <adrian@humboldt.co.uk */
1353                 .name           = "AG Electronics GMV1",
1354                 .video_inputs   = 2,
1355                 .audio_inputs   = 0,
1356                 .tuner          = -1,
1357                 .svhs           = 1,
1358                 .gpiomask       = 0xF,
1359                 .muxsel         = { 2, 2 },
1360                 .audiomux       = { },
1361                 .no_msp34xx     = 1,
1362                 .needs_tvaudio  = 0,
1363                 .pll            = PLL_28,
1364                 .tuner_type     = -1,
1365                 .tuner_addr     = ADDR_UNSET,
1366                 .radio_addr     = ADDR_UNSET,
1367         },
1368         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1369                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1370                 new Easy TV BT878 version (model CPH061)
1371                 special thanks to Informatica Mieres for providing the card */
1372                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1373                 .video_inputs   = 3,
1374                 .audio_inputs   = 2,
1375                 .tuner          = 0,
1376                 .svhs           = 2,
1377                 .gpiomask       = 0xFF,
1378                 .muxsel         = { 2, 3, 1, 0 },
1379                 .audiomux       = { 1, 0, 4, 4, 9 },
1380                 .needs_tvaudio  = 0,
1381                 .pll            = PLL_28,
1382                 .tuner_type     = TUNER_PHILIPS_PAL,
1383                 .tuner_addr     = ADDR_UNSET,
1384                 .radio_addr     = ADDR_UNSET,
1385         },
1386         [BTTV_BOARD_ATI_TVWONDER] = {
1387                 /* Lukas Gebauer <geby@volny.cz> */
1388                 .name           = "ATI TV-Wonder",
1389                 .video_inputs   = 3,
1390                 .audio_inputs   = 1,
1391                 .tuner          = 0,
1392                 .svhs           = 2,
1393                 .gpiomask       = 0xf03f,
1394                 .muxsel         = { 2, 3, 1, 0 },
1395                 .audiomux       = { 0xbffe, 0, 0xbfff, 0, 0xbffe },
1396                 .pll            = PLL_28,
1397                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1398                 .tuner_addr     = ADDR_UNSET,
1399                 .radio_addr     = ADDR_UNSET,
1400         },
1401
1402         /* ---- card 0x40 ---------------------------------- */
1403         [BTTV_BOARD_ATI_TVWONDERVE] = {
1404                 /* Lukas Gebauer <geby@volny.cz> */
1405                 .name           = "ATI TV-Wonder VE",
1406                 .video_inputs   = 2,
1407                 .audio_inputs   = 1,
1408                 .tuner          = 0,
1409                 .svhs           = -1,
1410                 .gpiomask       = 1,
1411                 .muxsel         = { 2, 3, 0, 1 },
1412                 .audiomux       = { 0, 0, 1, 0, 0 },
1413                 .no_msp34xx     = 1,
1414                 .pll            = PLL_28,
1415                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1416                 .tuner_addr     = ADDR_UNSET,
1417                 .radio_addr     = ADDR_UNSET,
1418         },
1419         [BTTV_BOARD_FLYVIDEO2000] = {
1420                 /* DeeJay <deejay@westel900.net (2000S) */
1421                 .name           = "Lifeview FlyVideo 2000S LR90",
1422                 .video_inputs   = 3,
1423                 .audio_inputs   = 3,
1424                 .tuner          = 0,
1425                 .svhs           = 2,
1426                 .gpiomask       = 0x18e0,
1427                 .muxsel         = { 2, 3, 0, 1 },
1428                                 /* Radio changed from 1e80 to 0x800 to make
1429                                 FlyVideo2000S in .hu happy (gm)*/
1430                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1431                 .audiomux       = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1432                 .audio_hook     = fv2000s_audio,
1433                 .no_msp34xx     = 1,
1434                 .no_tda9875     = 1,
1435                 .needs_tvaudio  = 1,
1436                 .pll            = PLL_28,
1437                 .tuner_type     = 5,
1438                 .tuner_addr     = ADDR_UNSET,
1439                 .radio_addr     = ADDR_UNSET,
1440         },
1441         [BTTV_BOARD_TERRATVALUER] = {
1442                 .name           = "Terratec TValueRadio",
1443                 .video_inputs   = 3,
1444                 .audio_inputs   = 1,
1445                 .tuner          = 0,
1446                 .svhs           = 2,
1447                 .gpiomask       = 0xffff00,
1448                 .muxsel         = { 2, 3, 1, 1 },
1449                 .audiomux       = { 0x500, 0x500, 0x300, 0x900, 0x900 },
1450                 .needs_tvaudio  = 1,
1451                 .pll            = PLL_28,
1452                 .tuner_type     = TUNER_PHILIPS_PAL,
1453                 .tuner_addr     = ADDR_UNSET,
1454                 .radio_addr     = ADDR_UNSET,
1455                 .has_radio      = 1,
1456         },
1457         [BTTV_BOARD_GVBCTV4PCI] = {
1458                 /* TANAKA Kei <peg00625@nifty.com> */
1459                 .name           = "IODATA GV-BCTV4/PCI",
1460                 .video_inputs   = 3,
1461                 .audio_inputs   = 1,
1462                 .tuner          = 0,
1463                 .svhs           = 2,
1464                 .gpiomask       = 0x010f00,
1465                 .muxsel         = {2, 3, 0, 0 },
1466                 .audiomux       = {0x10000, 0, 0x10000, 0, 0, 0 },
1467                 .no_msp34xx     = 1,
1468                 .pll            = PLL_28,
1469                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1470                 .tuner_addr     = ADDR_UNSET,
1471                 .radio_addr     = ADDR_UNSET,
1472                 .audio_hook     = gvbctv3pci_audio,
1473         },
1474
1475         /* ---- card 0x44 ---------------------------------- */
1476         [BTTV_BOARD_VOODOOTV_FM] = {
1477                 .name           = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1478                 /* try "insmod msp3400 simple=0" if you have
1479                 * sound problems with this card. */
1480                 .video_inputs   = 4,
1481                 .audio_inputs   = 1,
1482                 .tuner          = 0,
1483                 .svhs           = -1,
1484                 .gpiomask       = 0x4f8a00,
1485                 /* 0x100000: 1=MSP enabled (0=disable again)
1486                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1487                 .audiomux       = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1488                 /* tvtuner, radio,   external,internal, mute,  stereo
1489                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1490                 .muxsel         = { 2, 3 ,0 ,1 },
1491                 .tuner_type     = TUNER_MT2032,
1492                 .tuner_addr     = ADDR_UNSET,
1493                 .radio_addr     = ADDR_UNSET,
1494                 .pll            = PLL_28,
1495                 .has_radio      = 1,
1496         },
1497         [BTTV_BOARD_AIMMS] = {
1498                 /* Philip Blundell <pb@nexus.co.uk> */
1499                 .name           = "Active Imaging AIMMS",
1500                 .video_inputs   = 1,
1501                 .audio_inputs   = 0,
1502                 .tuner          = -1,
1503                 .tuner_type     = -1,
1504                 .tuner_addr     = ADDR_UNSET,
1505                 .radio_addr     = ADDR_UNSET,
1506                 .pll            = PLL_28,
1507                 .muxsel         = { 2 },
1508                 .gpiomask       = 0
1509         },
1510         [BTTV_BOARD_PV_BT878P_PLUS] = {
1511                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1512                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1513                 .video_inputs   = 3,
1514                 .audio_inputs   = 4,
1515                 .tuner          = 0,
1516                 .svhs           = 2,
1517                 .gpiomask       = 15,
1518                 .muxsel         = { 2, 3, 1, 1 },
1519                 .audiomux       = { 0, 0, 11, 7, 13, 0 }, /* TV and Radio with same GPIO ! */
1520                 .needs_tvaudio  = 1,
1521                 .pll            = PLL_28,
1522                 .tuner_type     = 25,
1523                 .tuner_addr     = ADDR_UNSET,
1524                 .radio_addr     = ADDR_UNSET,
1525                 .has_remote     = 1,
1526                 /* GPIO wiring:
1527                         GPIO0: U4.A0 (hef4052bt)
1528                         GPIO1: U4.A1
1529                         GPIO2: U4.A1 (second hef4052bt)
1530                         GPIO3: U4.nEN, U5.A0, A5.nEN
1531                         GPIO8-15: vrd866b ?
1532                 */
1533         },
1534         [BTTV_BOARD_FLYVIDEO98EZ] = {
1535                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1536                 .video_inputs   = 4,
1537                 .audio_inputs   = 0,
1538                 .tuner          = -1,
1539                 .svhs           = 2,
1540                 .muxsel         = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1541                 .pll            = PLL_28,
1542                 .no_msp34xx     = 1,
1543                 .tuner_type     = UNSET,
1544                 .tuner_addr     = ADDR_UNSET,
1545                 .radio_addr     = ADDR_UNSET,
1546         },
1547
1548         /* ---- card 0x48 ---------------------------------- */
1549         [BTTV_BOARD_PV_BT878P_9B] = {
1550                 /* Dariusz Kowalewski <darekk@automex.pl> */
1551                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1552                 .video_inputs   = 4,
1553                 .audio_inputs   = 1,
1554                 .tuner          = 0,
1555                 .svhs           = 2,
1556                 .gpiomask       = 0x3f,
1557                 .muxsel         = { 2, 3, 1, 1 },
1558                 .audiomux       = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1559                 .needs_tvaudio  = 1,
1560                 .no_msp34xx     = 1,
1561                 .no_tda9875     = 1,
1562                 .pll            = PLL_28,
1563                 .tuner_type     = 5,
1564                 .tuner_addr     = ADDR_UNSET,
1565                 .radio_addr     = ADDR_UNSET,
1566                 .audio_hook     = pvbt878p9b_audio, /* Note: not all cards have stereo */
1567                 .has_radio      = 1,  /* Note: not all cards have radio */
1568                 .has_remote     = 1,
1569                 /* GPIO wiring:
1570                         GPIO0: A0 hef4052
1571                         GPIO1: A1 hef4052
1572                         GPIO3: nEN hef4052
1573                         GPIO8-15: vrd866b
1574                         GPIO20,22,23: R30,R29,R28
1575                 */
1576         },
1577         [BTTV_BOARD_SENSORAY311] = {
1578                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1579                 /* you must jumper JP5 for the card to work */
1580                 .name           = "Sensoray 311",
1581                 .video_inputs   = 5,
1582                 .audio_inputs   = 0,
1583                 .tuner          = -1,
1584                 .svhs           = 4,
1585                 .gpiomask       = 0,
1586                 .muxsel         = { 2, 3, 1, 0, 0 },
1587                 .audiomux       = { 0 },
1588                 .needs_tvaudio  = 0,
1589                 .tuner_type     = -1,
1590                 .tuner_addr     = ADDR_UNSET,
1591                 .radio_addr     = ADDR_UNSET,
1592         },
1593         [BTTV_BOARD_RV605] = {
1594                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1595                 .name           = "RemoteVision MX (RV605)",
1596                 .video_inputs   = 16,
1597                 .audio_inputs   = 0,
1598                 .tuner          = -1,
1599                 .svhs           = -1,
1600                 .gpiomask       = 0x00,
1601                 .gpiomask2      = 0x07ff,
1602                 .muxsel         = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1603                                 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1604                 .no_msp34xx     = 1,
1605                 .no_tda9875     = 1,
1606                 .tuner_type     = -1,
1607                 .tuner_addr     = ADDR_UNSET,
1608                 .radio_addr     = ADDR_UNSET,
1609                 .muxsel_hook    = rv605_muxsel,
1610         },
1611         [BTTV_BOARD_POWERCLR_MTV878] = {
1612                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1613                 .video_inputs   = 3,
1614                 .audio_inputs   = 2,
1615                 .tuner          = 0,
1616                 .svhs           = 2,
1617                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1618                 .muxsel         = { 2, 1, 1, },
1619                 .audiomux       = { 0, 1, 2, 2, 4 },
1620                 .needs_tvaudio  = 0,
1621                 .tuner_type     = TUNER_PHILIPS_PAL,
1622                 .tuner_addr     = ADDR_UNSET,
1623                 .radio_addr     = ADDR_UNSET,
1624                 .pll            = PLL_28,
1625                 .has_radio      = 1,
1626         },
1627
1628         /* ---- card 0x4c ---------------------------------- */
1629         [BTTV_BOARD_WINDVR] = {
1630                 /* Masaki Suzuki <masaki@btree.org> */
1631                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1632                 .video_inputs   = 3,
1633                 .audio_inputs   = 1,
1634                 .tuner          = 0,
1635                 .svhs           = 2,
1636                 .gpiomask       = 0x140007,
1637                 .muxsel         = { 2, 3, 1, 1 },
1638                 .audiomux       = { 0, 1, 2, 3, 4, 0 },
1639                 .tuner_type     = TUNER_PHILIPS_NTSC,
1640                 .tuner_addr     = ADDR_UNSET,
1641                 .radio_addr     = ADDR_UNSET,
1642                 .audio_hook     = windvr_audio,
1643         },
1644         [BTTV_BOARD_GRANDTEC_MULTI] = {
1645                 .name           = "GrandTec Multi Capture Card (Bt878)",
1646                 .video_inputs   = 4,
1647                 .audio_inputs   = 0,
1648                 .tuner          = -1,
1649                 .svhs           = -1,
1650                 .gpiomask       = 0,
1651                 .muxsel         = { 2, 3, 1, 0 },
1652                 .audiomux       = { 0 },
1653                 .needs_tvaudio  = 0,
1654                 .no_msp34xx     = 1,
1655                 .pll            = PLL_28,
1656                 .tuner_type     = -1,
1657                 .tuner_addr     = ADDR_UNSET,
1658                 .radio_addr     = ADDR_UNSET,
1659         },
1660         [BTTV_BOARD_KWORLD] = {
1661                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1662                 .video_inputs   = 4,
1663                 .audio_inputs   = 3,
1664                 .tuner          = 0,
1665                 .svhs           = 2,
1666                 .gpiomask       = 7,
1667                 .muxsel         = { 2, 3, 1, 1 },   /* Tuner, SVid, SVHS, SVid to SVHS connector */
1668                 .audiomux       = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
1669                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1670                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1671                                                 * This card lacks PCI subsystem ID, sigh.
1672                                                 * audiomux=1: lower volume, 2+3: mute
1673                                                 * btwincap uses 0x80000/0x80003
1674                                                 */
1675                 .needs_tvaudio  = 0,
1676                 .no_msp34xx     = 1,
1677                 .pll            = PLL_28,
1678                 .tuner_type     = 5,
1679                 .tuner_addr     = ADDR_UNSET,
1680                 .radio_addr     = ADDR_UNSET,
1681                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1682                 radio signal strength indicators work fine. */
1683                 .has_radio      = 1,
1684                 /* GPIO Info:
1685                         GPIO0,1:   HEF4052 A0,A1
1686                         GPIO2:     HEF4052 nENABLE
1687                         GPIO3-7:   n.c.
1688                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1689                         GPIO14,15: ??
1690                         GPIO16-21: n.c.
1691                         GPIO22,23: ??
1692                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1693         },
1694         [BTTV_BOARD_DSP_TCVIDEO] = {
1695                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1696                 .name           = "DSP Design TCVIDEO",
1697                 .video_inputs   = 4,
1698                 .svhs           = -1,
1699                 .muxsel         = { 2, 3, 1, 0 },
1700                 .pll            = PLL_28,
1701                 .tuner_type     = -1,
1702                 .tuner_addr     = ADDR_UNSET,
1703                 .radio_addr     = ADDR_UNSET,
1704         },
1705
1706                 /* ---- card 0x50 ---------------------------------- */
1707         [BTTV_BOARD_HAUPPAUGEPVR] = {
1708                 .name           = "Hauppauge WinTV PVR",
1709                 .video_inputs   = 4,
1710                 .audio_inputs   = 1,
1711                 .tuner          = 0,
1712                 .svhs           = 2,
1713                 .muxsel         = { 2, 0, 1, 1 },
1714                 .needs_tvaudio  = 1,
1715                 .pll            = PLL_28,
1716                 .tuner_type     = -1,
1717                 .tuner_addr     = ADDR_UNSET,
1718                 .radio_addr     = ADDR_UNSET,
1719
1720                 .gpiomask       = 7,
1721                 .audiomux       = {7},
1722         },
1723         [BTTV_BOARD_GVBCTV5PCI] = {
1724                 .name           = "IODATA GV-BCTV5/PCI",
1725                 .video_inputs   = 3,
1726                 .audio_inputs   = 1,
1727                 .tuner          = 0,
1728                 .svhs           = 2,
1729                 .gpiomask       = 0x0f0f80,
1730                 .muxsel         = {2, 3, 1, 0 },
1731                 .audiomux       = {0x030000, 0x010000, 0, 0, 0x020000, 0},
1732                 .no_msp34xx     = 1,
1733                 .pll            = PLL_28,
1734                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1735                 .tuner_addr     = ADDR_UNSET,
1736                 .radio_addr     = ADDR_UNSET,
1737                 .audio_hook     = gvbctv5pci_audio,
1738                 .has_radio      = 1,
1739         },
1740         [BTTV_BOARD_OSPREY1x0] = {
1741                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1742                 .video_inputs   = 4,                  /* id-inputs-clock */
1743                 .audio_inputs   = 0,
1744                 .tuner          = -1,
1745                 .svhs           = 3,
1746                 .muxsel         = { 3, 2, 0, 1 },
1747                 .pll            = PLL_28,
1748                 .tuner_type     = -1,
1749                 .tuner_addr     = ADDR_UNSET,
1750                 .radio_addr     = ADDR_UNSET,
1751                 .no_msp34xx     = 1,
1752                 .no_tda9875     = 1,
1753                 .no_tda7432     = 1,
1754         },
1755         [BTTV_BOARD_OSPREY1x0_848] = {
1756                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1757                 .video_inputs   = 3,
1758                 .audio_inputs   = 0,
1759                 .tuner          = -1,
1760                 .svhs           = 2,
1761                 .muxsel         = { 2, 3, 1 },
1762                 .pll            = PLL_28,
1763                 .tuner_type     = -1,
1764                 .tuner_addr     = ADDR_UNSET,
1765                 .radio_addr     = ADDR_UNSET,
1766                 .no_msp34xx     = 1,
1767                 .no_tda9875     = 1,
1768                 .no_tda7432     = 1,
1769         },
1770
1771                 /* ---- card 0x54 ---------------------------------- */
1772         [BTTV_BOARD_OSPREY101_848] = {
1773                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1774                 .video_inputs   = 2,
1775                 .audio_inputs   = 0,
1776                 .tuner          = -1,
1777                 .svhs           = 1,
1778                 .muxsel         = { 3, 1 },
1779                 .pll            = PLL_28,
1780                 .tuner_type     = -1,
1781                 .tuner_addr     = ADDR_UNSET,
1782                 .radio_addr     = ADDR_UNSET,
1783                 .no_msp34xx     = 1,
1784                 .no_tda9875     = 1,
1785                 .no_tda7432     = 1,
1786         },
1787         [BTTV_BOARD_OSPREY1x1] = {
1788                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1789                 .video_inputs   = 1,
1790                 .audio_inputs   = 0,
1791                 .tuner          = -1,
1792                 .svhs           = -1,
1793                 .muxsel         = { 0 },
1794                 .pll            = PLL_28,
1795                 .tuner_type     = -1,
1796                 .tuner_addr     = ADDR_UNSET,
1797                 .radio_addr     = ADDR_UNSET,
1798                 .no_msp34xx     = 1,
1799                 .no_tda9875     = 1,
1800                 .no_tda7432     = 1,
1801         },
1802         [BTTV_BOARD_OSPREY1x1_SVID] = {
1803                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1804                 .video_inputs   = 2,
1805                 .audio_inputs   = 0,
1806                 .tuner          = -1,
1807                 .svhs           = 1,
1808                 .muxsel         = { 0, 1 },
1809                 .pll            = PLL_28,
1810                 .tuner_type     = -1,
1811                 .tuner_addr     = ADDR_UNSET,
1812                 .radio_addr     = ADDR_UNSET,
1813                 .no_msp34xx     = 1,
1814                 .no_tda9875     = 1,
1815                 .no_tda7432     = 1,
1816         },
1817         [BTTV_BOARD_OSPREY2xx] = {
1818                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1819                 .video_inputs   = 1,
1820                 .audio_inputs   = 1,
1821                 .tuner          = -1,
1822                 .svhs           = -1,
1823                 .muxsel         = { 0 },
1824                 .pll            = PLL_28,
1825                 .tuner_type     = UNSET,
1826                 .tuner_addr     = ADDR_UNSET,
1827                 .radio_addr     = ADDR_UNSET,
1828                 .no_msp34xx     = 1,
1829                 .no_tda9875     = 1,
1830                 .no_tda7432     = 1,
1831         },
1832
1833                 /* ---- card 0x58 ---------------------------------- */
1834         [BTTV_BOARD_OSPREY2x0_SVID] = {
1835                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1836                 .video_inputs   = 2,
1837                 .audio_inputs   = 1,
1838                 .tuner          = -1,
1839                 .svhs           = 1,
1840                 .muxsel         = { 0, 1 },
1841                 .pll            = PLL_28,
1842                 .tuner_type     = UNSET,
1843                 .tuner_addr     = ADDR_UNSET,
1844                 .radio_addr     = ADDR_UNSET,
1845                 .no_msp34xx     = 1,
1846                 .no_tda9875     = 1,
1847                 .no_tda7432     = 1,
1848         },
1849         [BTTV_BOARD_OSPREY2x0] = {
1850                 .name           = "Osprey 210/220",   /* 0x1(A|B)-04C0-C1 */
1851                 .video_inputs   = 2,
1852                 .audio_inputs   = 1,
1853                 .tuner          = -1,
1854                 .svhs           = 1,
1855                 .muxsel         = { 2, 3 },
1856                 .pll            = PLL_28,
1857                 .tuner_type     = UNSET,
1858                 .tuner_addr     = ADDR_UNSET,
1859                 .radio_addr     = ADDR_UNSET,
1860                 .no_msp34xx     = 1,
1861                 .no_tda9875     = 1,
1862                 .no_tda7432     = 1,
1863         },
1864         [BTTV_BOARD_OSPREY500] = {
1865                 .name           = "Osprey 500",   /* 500 */
1866                 .video_inputs   = 2,
1867                 .audio_inputs   = 1,
1868                 .tuner          = -1,
1869                 .svhs           = 1,
1870                 .muxsel         = { 2, 3 },
1871                 .pll            = PLL_28,
1872                 .tuner_type     = -1,
1873                 .tuner_addr     = ADDR_UNSET,
1874                 .radio_addr     = ADDR_UNSET,
1875                 .no_msp34xx     = 1,
1876                 .no_tda9875     = 1,
1877                 .no_tda7432     = 1,
1878         },
1879         [BTTV_BOARD_OSPREY540] = {
1880                 .name           = "Osprey 540",   /* 540 */
1881                 .video_inputs   = 4,
1882                 .audio_inputs   = 1,
1883                 .tuner          = -1,
1884         #if 0 /* TODO ... */
1885                 .svhs           = OSPREY540_SVID_ANALOG,
1886                 .muxsel         = {       [OSPREY540_COMP_ANALOG] = 2,
1887                                         [OSPREY540_SVID_ANALOG] = 3, },
1888         #endif
1889                 .pll            = PLL_28,
1890                 .tuner_type     = -1,
1891                 .tuner_addr     = ADDR_UNSET,
1892                 .radio_addr     = ADDR_UNSET,
1893                 .no_msp34xx     = 1,
1894                 .no_tda9875     = 1,
1895                 .no_tda7432     = 1,
1896         #if 0 /* TODO ... */
1897                 .muxsel_hook    = osprey_540_muxsel,
1898                 .picture_hook   = osprey_540_set_picture,
1899         #endif
1900         },
1901
1902                 /* ---- card 0x5C ---------------------------------- */
1903         [BTTV_BOARD_OSPREY2000] = {
1904                 .name           = "Osprey 2000",  /* 2000 */
1905                 .video_inputs   = 2,
1906                 .audio_inputs   = 1,
1907                 .tuner          = -1,
1908                 .svhs           = 1,
1909                 .muxsel         = { 2, 3 },
1910                 .pll            = PLL_28,
1911                 .tuner_type     = UNSET,
1912                 .tuner_addr     = ADDR_UNSET,
1913                 .radio_addr     = ADDR_UNSET,
1914                 .no_msp34xx     = 1,
1915                 .no_tda9875     = 1,
1916                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1917         },
1918         [BTTV_BOARD_IDS_EAGLE] = {
1919                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1920                 .name           = "IDS Eagle",
1921                 .video_inputs   = 4,
1922                 .audio_inputs   = 0,
1923                 .tuner          = -1,
1924                 .tuner_type     = -1,
1925                 .tuner_addr     = ADDR_UNSET,
1926                 .radio_addr     = ADDR_UNSET,
1927                 .svhs           = -1,
1928                 .gpiomask       = 0,
1929                 .muxsel         = { 0, 1, 2, 3 },
1930                 .muxsel_hook    = eagle_muxsel,
1931                 .no_msp34xx     = 1,
1932                 .no_tda9875     = 1,
1933                 .pll            = PLL_28,
1934         },
1935         [BTTV_BOARD_PINNACLESAT] = {
1936                 .name           = "Pinnacle PCTV Sat",
1937                 .video_inputs   = 2,
1938                 .audio_inputs   = 0,
1939                 .svhs           = 1,
1940                 .tuner          = -1,
1941                 .tuner_type     = -1,
1942                 .tuner_addr     = ADDR_UNSET,
1943                 .radio_addr     = ADDR_UNSET,
1944                 .no_msp34xx     = 1,
1945                 .no_tda9875     = 1,
1946                 .no_tda7432     = 1,
1947                 .muxsel         = { 3, 0, 1, 2 },
1948                 .pll            = PLL_28,
1949                 .no_gpioirq     = 1,
1950                 .has_dvb        = 1,
1951         },
1952         [BTTV_BOARD_FORMAC_PROTV] = {
1953                 .name           = "Formac ProTV II (bt878)",
1954                 .video_inputs   = 4,
1955                 .audio_inputs   = 1,
1956                 .tuner          = 0,
1957                 .svhs           = 3,
1958                 .gpiomask       = 2,
1959                 /* TV, Comp1, Composite over SVID con, SVID */
1960                 .muxsel         = { 2, 3, 1, 1 },
1961                 .audiomux       = { 2, 2, 0, 0, 0 },
1962                 .pll            = PLL_28,
1963                 .has_radio      = 1,
1964                 .tuner_type     = TUNER_PHILIPS_PAL,
1965                 .tuner_addr     = ADDR_UNSET,
1966                 .radio_addr     = ADDR_UNSET,
1967         /* sound routing:
1968                 GPIO=0x00,0x01,0x03: mute (?)
1969                 0x02: both TV and radio (tuner: FM1216/I)
1970                 The card has onboard audio connectors labeled "cdrom" and "board",
1971                 not soldered here, though unknown wiring.
1972                 Card lacks: external audio in, pci subsystem id.
1973         */
1974         },
1975
1976                 /* ---- card 0x60 ---------------------------------- */
1977         [BTTV_BOARD_MACHTV] = {
1978                 .name           = "MachTV",
1979                 .video_inputs   = 3,
1980                 .audio_inputs   = 1,
1981                 .tuner          = 0,
1982                 .svhs           = -1,
1983                 .gpiomask       = 7,
1984                 .muxsel         = { 2, 3, 1, 1},
1985                 .audiomux       = { 0, 1, 2, 3, 4},
1986                 .needs_tvaudio  = 1,
1987                 .tuner_type     = 5,
1988                 .tuner_addr     = ADDR_UNSET,
1989                 .radio_addr     = ADDR_UNSET,
1990                 .pll            = PLL_28,
1991         },
1992         [BTTV_BOARD_EURESYS_PICOLO] = {
1993                 .name           = "Euresys Picolo",
1994                 .video_inputs   = 3,
1995                 .audio_inputs   = 0,
1996                 .tuner          = -1,
1997                 .svhs           = 2,
1998                 .gpiomask       = 0,
1999                 .no_msp34xx     = 1,
2000                 .no_tda9875     = 1,
2001                 .no_tda7432     = 1,
2002                 .muxsel         = { 2, 0, 1},
2003                 .pll            = PLL_28,
2004                 .tuner_type     = UNSET,
2005                 .tuner_addr     = ADDR_UNSET,
2006                 .radio_addr     = ADDR_UNSET,
2007         },
2008         [BTTV_BOARD_PV150] = {
2009                 /* Luc Van Hoeylandt <luc@e-magic.be> */
2010                 .name           = "ProVideo PV150", /* 0x4f */
2011                 .video_inputs   = 2,
2012                 .audio_inputs   = 0,
2013                 .tuner          = -1,
2014                 .svhs           = -1,
2015                 .gpiomask       = 0,
2016                 .muxsel         = { 2, 3 },
2017                 .audiomux       = { 0 },
2018                 .needs_tvaudio  = 0,
2019                 .no_msp34xx     = 1,
2020                 .pll            = PLL_28,
2021                 .tuner_type     = UNSET,
2022                 .tuner_addr     = ADDR_UNSET,
2023                 .radio_addr     = ADDR_UNSET,
2024         },
2025         [BTTV_BOARD_AD_TVK503] = {
2026                 /* Hiroshi Takekawa <sian@big.or.jp> */
2027                 /* This card lacks subsystem ID */
2028                 .name           = "AD-TVK503", /* 0x63 */
2029                 .video_inputs   = 4,
2030                 .audio_inputs   = 1,
2031                 .tuner          = 0,
2032                 .svhs           = 2,
2033                 .gpiomask       = 0x001e8007,
2034                 .muxsel         = { 2, 3, 1, 0 },
2035                 /*                  Tuner, Radio, external, internal, off,  on */
2036                 .audiomux       = { 0x08,  0x0f,  0x0a,     0x08,     0x0f, 0x08 },
2037                 .needs_tvaudio  = 0,
2038                 .no_msp34xx     = 1,
2039                 .pll            = PLL_28,
2040                 .tuner_type     = 2,
2041                 .tuner_addr     = ADDR_UNSET,
2042                 .radio_addr     = ADDR_UNSET,
2043                 .audio_hook     = adtvk503_audio,
2044         },
2045
2046                 /* ---- card 0x64 ---------------------------------- */
2047         [BTTV_BOARD_HERCULES_SM_TV] = {
2048                 .name           = "Hercules Smart TV Stereo",
2049                 .video_inputs   = 4,
2050                 .audio_inputs   = 1,
2051                 .tuner          = 0,
2052                 .svhs           = 2,
2053                 .gpiomask       = 0x00,
2054                 .muxsel         = { 2, 3, 1, 1 },
2055                 .needs_tvaudio  = 1,
2056                 .no_msp34xx     = 1,
2057                 .pll            = PLL_28,
2058                 .tuner_type     = 5,
2059                 .tuner_addr     = ADDR_UNSET,
2060                 .radio_addr     = ADDR_UNSET,
2061                 /* Notes:
2062                 - card lacks subsystem ID
2063                 - stereo variant w/ daughter board with tda9874a @0xb0
2064                 - Audio Routing:
2065                         always from tda9874 independent of GPIO (?)
2066                         external line in: unknown
2067                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2068                         hef4053 (instead 4052) for unknown function
2069                 */
2070         },
2071         [BTTV_BOARD_PACETV] = {
2072                 .name           = "Pace TV & Radio Card",
2073                 .video_inputs   = 4,
2074                 .audio_inputs   = 1,
2075                 .tuner          = 0,
2076                 .svhs           = 2,
2077                 .muxsel         = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2078                 .gpiomask       = 0,
2079                 .no_tda9875     = 1,
2080                 .no_tda7432     = 1,
2081                 .tuner_type     = 1,
2082                 .tuner_addr     = ADDR_UNSET,
2083                 .radio_addr     = ADDR_UNSET,
2084                 .has_radio      = 1,
2085                 .pll            = PLL_28,
2086                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2087                 only internal line out: (4pin header) RGGL
2088                 Radio must be decoded by msp3410d (not routed through)*/
2089                 /*
2090                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
2091                 */
2092         },
2093         [BTTV_BOARD_IVC200] = {
2094                 /* Chris Willing <chris@vislab.usyd.edu.au> */
2095                 .name           = "IVC-200",
2096                 .video_inputs   = 1,
2097                 .audio_inputs   = 0,
2098                 .tuner          = -1,
2099                 .tuner_type     = -1,
2100                 .tuner_addr     = ADDR_UNSET,
2101                 .radio_addr     = ADDR_UNSET,
2102                 .svhs           = -1,
2103                 .gpiomask       = 0xdf,
2104                 .muxsel         = { 2 },
2105                 .pll            = PLL_28,
2106         },
2107         [BTTV_BOARD_XGUARD] = {
2108                 .name           = "Grand X-Guard / Trust 814PCI",
2109                 .video_inputs   = 16,
2110                 .audio_inputs   = 0,
2111                 .tuner          = -1,
2112                 .svhs           = -1,
2113                 .tuner_type     = 4,
2114                 .tuner_addr     = ADDR_UNSET,
2115                 .radio_addr     = ADDR_UNSET,
2116                 .gpiomask2      = 0xff,
2117                 .muxsel         = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2118                 .muxsel_hook    = xguard_muxsel,
2119                 .no_msp34xx     = 1,
2120                 .no_tda9875     = 1,
2121                 .no_tda7432     = 1,
2122                 .pll            = PLL_28,
2123         },
2124
2125                 /* ---- card 0x68 ---------------------------------- */
2126         [BTTV_BOARD_NEBULA_DIGITV] = {
2127                 .name           = "Nebula Electronics DigiTV",
2128                 .video_inputs   = 1,
2129                 .tuner          = -1,
2130                 .svhs           = -1,
2131                 .muxsel         = { 2, 3, 1, 0 },
2132                 .no_msp34xx     = 1,
2133                 .no_tda9875     = 1,
2134                 .no_tda7432     = 1,
2135                 .pll            = PLL_28,
2136                 .tuner_type     = -1,
2137                 .tuner_addr     = ADDR_UNSET,
2138                 .radio_addr     = ADDR_UNSET,
2139                 .has_dvb        = 1,
2140                 .has_remote     = 1,
2141                 .gpiomask       = 0x1b,
2142                 .no_gpioirq     = 1,
2143         },
2144         [BTTV_BOARD_PV143] = {
2145                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2146                 .name           = "ProVideo PV143",
2147                 .video_inputs   = 4,
2148                 .audio_inputs   = 0,
2149                 .tuner          = -1,
2150                 .svhs           = -1,
2151                 .gpiomask       = 0,
2152                 .muxsel         = { 2, 3, 1, 0 },
2153                 .audiomux       = { 0 },
2154                 .needs_tvaudio  = 0,
2155                 .no_msp34xx     = 1,
2156                 .pll            = PLL_28,
2157                 .tuner_type     = -1,
2158                 .tuner_addr     = ADDR_UNSET,
2159                 .radio_addr     = ADDR_UNSET,
2160         },
2161         [BTTV_BOARD_VD009X1_MINIDIN] = {
2162                 /* M.Klahr@phytec.de */
2163                 .name           = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2164                 .video_inputs   = 4,
2165                 .audio_inputs   = 0,
2166                 .tuner          = -1, /* card has no tuner */
2167                 .svhs           = 3,
2168                 .gpiomask       = 0x00,
2169                 .muxsel         = { 2, 3, 1, 0 },
2170                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2171                 .needs_tvaudio  = 1,
2172                 .pll            = PLL_28,
2173                 .tuner_type     = -1,
2174                 .tuner_addr     = ADDR_UNSET,
2175                 .radio_addr     = ADDR_UNSET,
2176         },
2177         [BTTV_BOARD_VD009X1_COMBI] = {
2178                 .name           = "PHYTEC VD-009-X1 Combi (bt878)",
2179                 .video_inputs   = 4,
2180                 .audio_inputs   = 0,
2181                 .tuner          = -1, /* card has no tuner */
2182                 .svhs           = 3,
2183                 .gpiomask       = 0x00,
2184                 .muxsel         = { 2, 3, 1, 1 },
2185                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2186                 .needs_tvaudio  = 1,
2187                 .pll            = PLL_28,
2188                 .tuner_type     = -1,
2189                 .tuner_addr     = ADDR_UNSET,
2190                 .radio_addr     = ADDR_UNSET,
2191         },
2192
2193                 /* ---- card 0x6c ---------------------------------- */
2194         [BTTV_BOARD_VD009_MINIDIN] = {
2195                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2196                 .video_inputs   = 10,
2197                 .audio_inputs   = 0,
2198                 .tuner          = -1, /* card has no tuner */
2199                 .svhs           = 9,
2200                 .gpiomask       = 0x00,
2201                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2202                                         via the upper nibble of muxsel. here: used for
2203                                         xternal video-mux */
2204                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2205                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2206                 .needs_tvaudio  = 1,
2207                 .pll            = PLL_28,
2208                 .tuner_type     = -1,
2209                 .tuner_addr     = ADDR_UNSET,
2210                 .radio_addr     = ADDR_UNSET,
2211         },
2212         [BTTV_BOARD_VD009_COMBI] = {
2213                 .name           = "PHYTEC VD-009 Combi (bt878)",
2214                 .video_inputs   = 10,
2215                 .audio_inputs   = 0,
2216                 .tuner          = -1, /* card has no tuner */
2217                 .svhs           = 9,
2218                 .gpiomask       = 0x00,
2219                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2220                                         via the upper nibble of muxsel. here: used for
2221                                         xternal video-mux */
2222                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2223                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2224                 .needs_tvaudio  = 1,
2225                 .pll            = PLL_28,
2226                 .tuner_type     = -1,
2227                 .tuner_addr     = ADDR_UNSET,
2228                 .radio_addr     = ADDR_UNSET,
2229         },
2230         [BTTV_BOARD_IVC100] = {
2231                 .name           = "IVC-100",
2232                 .video_inputs   = 4,
2233                 .audio_inputs   = 0,
2234                 .tuner          = -1,
2235                 .tuner_type     = -1,
2236                 .tuner_addr     = ADDR_UNSET,
2237                 .radio_addr     = ADDR_UNSET,
2238                 .svhs           = -1,
2239                 .gpiomask       = 0xdf,
2240                 .muxsel         = { 2, 3, 1, 0 },
2241                 .pll            = PLL_28,
2242         },
2243         [BTTV_BOARD_IVC120] = {
2244                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2245                 .name           = "IVC-120G",
2246                 .video_inputs   = 16,
2247                 .audio_inputs   = 0,    /* card has no audio */
2248                 .tuner          = -1,   /* card has no tuner */
2249                 .tuner_type     = -1,
2250                 .tuner_addr     = ADDR_UNSET,
2251                 .radio_addr     = ADDR_UNSET,
2252                 .svhs           = -1,   /* card has no svhs */
2253                 .needs_tvaudio  = 0,
2254                 .no_msp34xx     = 1,
2255                 .no_tda9875     = 1,
2256                 .no_tda7432     = 1,
2257                 .gpiomask       = 0x00,
2258                 .muxsel         = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2259                                 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2260                 .muxsel_hook    = ivc120_muxsel,
2261                 .pll            = PLL_28,
2262         },
2263
2264                 /* ---- card 0x70 ---------------------------------- */
2265         [BTTV_BOARD_PC_HDTV] = {
2266                 .name           = "pcHDTV HD-2000 TV",
2267                 .video_inputs   = 4,
2268                 .audio_inputs   = 1,
2269                 .tuner          = 0,
2270                 .svhs           = 2,
2271                 .muxsel         = { 2, 3, 1, 0 },
2272                 .tuner_type     = TUNER_PHILIPS_ATSC,
2273                 .tuner_addr     = ADDR_UNSET,
2274                 .radio_addr     = ADDR_UNSET,
2275                 .has_dvb        = 1,
2276         },
2277         [BTTV_BOARD_TWINHAN_DST] = {
2278                 .name           = "Twinhan DST + clones",
2279                 .no_msp34xx     = 1,
2280                 .no_tda9875     = 1,
2281                 .no_tda7432     = 1,
2282                 .tuner_type     = TUNER_ABSENT,
2283                 .tuner_addr     = ADDR_UNSET,
2284                 .radio_addr     = ADDR_UNSET,
2285                 .no_video       = 1,
2286                 .has_dvb        = 1,
2287         },
2288         [BTTV_BOARD_WINFASTVC100] = {
2289                 .name           = "Winfast VC100",
2290                 .video_inputs   = 3,
2291                 .audio_inputs   = 0,
2292                 .svhs           = 1,
2293                 .tuner          = -1,
2294                 .muxsel         = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2295                 .no_msp34xx     = 1,
2296                 .no_tda9875     = 1,
2297                 .no_tda7432     = 1,
2298                 .tuner_type     = TUNER_ABSENT,
2299                 .tuner_addr     = ADDR_UNSET,
2300                 .radio_addr     = ADDR_UNSET,
2301                 .pll            = PLL_28,
2302         },
2303         [BTTV_BOARD_TEV560] = {
2304                 .name           = "Teppro TEV-560/InterVision IV-560",
2305                 .video_inputs   = 3,
2306                 .audio_inputs   = 1,
2307                 .tuner          = 0,
2308                 .svhs           = 2,
2309                 .gpiomask       = 3,
2310                 .muxsel         = { 2, 3, 1, 1 },
2311                 .audiomux       = { 1, 1, 1, 1, 0 },
2312                 .needs_tvaudio  = 1,
2313                 .tuner_type     = TUNER_PHILIPS_PAL,
2314                 .tuner_addr     = ADDR_UNSET,
2315                 .radio_addr     = ADDR_UNSET,
2316                 .pll            = PLL_35,
2317         },
2318
2319                 /* ---- card 0x74 ---------------------------------- */
2320         [BTTV_BOARD_SIMUS_GVC1100] = {
2321                 .name           = "SIMUS GVC1100",
2322                 .video_inputs   = 4,
2323                 .audio_inputs   = 0,
2324                 .tuner          = -1,
2325                 .svhs           = -1,
2326                 .tuner_type     = -1,
2327                 .tuner_addr     = ADDR_UNSET,
2328                 .radio_addr     = ADDR_UNSET,
2329                 .pll            = PLL_28,
2330                 .muxsel         = { 2, 2, 2, 2 },
2331                 .gpiomask       = 0x3F,
2332                 .muxsel_hook    = gvc1100_muxsel,
2333         },
2334         [BTTV_BOARD_NGSTV_PLUS] = {
2335                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2336                 .name           = "NGS NGSTV+",
2337                 .video_inputs   = 3,
2338                 .tuner          = 0,
2339                 .svhs           = 2,
2340                 .gpiomask       = 0x008007,
2341                 .muxsel         = { 2, 3, 0, 0 },
2342                 .audiomux       = { 0, 0, 0, 0, 0x000003, 0 },
2343                 .pll            = PLL_28,
2344                 .tuner_type     = TUNER_PHILIPS_PAL,
2345                 .tuner_addr     = ADDR_UNSET,
2346                 .radio_addr     = ADDR_UNSET,
2347                 .has_remote     = 1,
2348         },
2349         [BTTV_BOARD_LMLBT4] = {
2350                 /* http://linuxmedialabs.com */
2351                 .name           = "LMLBT4",
2352                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2353                 .audio_inputs   = 0,
2354                 .tuner          = -1,
2355                 .svhs           = -1,
2356                 .muxsel         = { 2, 3, 1, 0 },
2357                 .no_msp34xx     = 1,
2358                 .no_tda9875     = 1,
2359                 .no_tda7432     = 1,
2360                 .needs_tvaudio  = 0,
2361                 .tuner_type     = -1,
2362                 .tuner_addr     = ADDR_UNSET,
2363                 .radio_addr     = ADDR_UNSET,
2364         },
2365         [BTTV_BOARD_TEKRAM_M205] = {
2366                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2367                 .name           = "Tekram M205 PRO",
2368                 .video_inputs   = 3,
2369                 .audio_inputs   = 1,
2370                 .tuner          = 0,
2371                 .tuner_type     = TUNER_PHILIPS_PAL,
2372                 .tuner_addr     = ADDR_UNSET,
2373                 .radio_addr     = ADDR_UNSET,
2374                 .svhs           = 2,
2375                 .needs_tvaudio  = 0,
2376                 .gpiomask       = 0x68,
2377                 .muxsel         = { 2, 3, 1 },
2378                 .audiomux       = { 0x68, 0x68, 0x61, 0x61, 0x00 },
2379                 .pll            = PLL_28,
2380         },
2381
2382                 /* ---- card 0x78 ---------------------------------- */
2383         [BTTV_BOARD_CONTVFMI] = {
2384                 /* Javier Cendan Ares <jcendan@lycos.es> */
2385                 /* bt878 TV + FM without subsystem ID */
2386                 .name           = "Conceptronic CONTVFMi",
2387                 .video_inputs   = 3,
2388                 .audio_inputs   = 1,
2389                 .tuner          = 0,
2390                 .svhs           = 2,
2391                 .gpiomask       = 0x008007,
2392                 .muxsel         = { 2, 3, 1, 1 },
2393                 .audiomux       = { 0, 1, 2, 2, 3 },
2394                 .needs_tvaudio  = 0,
2395                 .pll            = PLL_28,
2396                 .tuner_type     = TUNER_PHILIPS_PAL,
2397                 .tuner_addr     = ADDR_UNSET,
2398                 .radio_addr     = ADDR_UNSET,
2399                 .has_remote     = 1,
2400                 .has_radio      = 1,
2401         },
2402         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2403                 /*Eric DEBIEF <debief@telemsa.com>*/
2404                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2405                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2406                 /*0x79 in bttv.h*/
2407                 .name           = "Euresys Picolo Tetra",
2408                 .video_inputs   = 4,
2409                 .audio_inputs   = 0,
2410                 .tuner          = -1,
2411                 .svhs           = -1,
2412                 .gpiomask       = 0,
2413                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2414                 .no_msp34xx     = 1,
2415                 .no_tda9875     = 1,
2416                 .no_tda7432     = 1,
2417                 .muxsel         = {2,2,2,2},/*878A input is always MUX0, see above.*/
2418                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2419                 .pll            = PLL_28,
2420                 .needs_tvaudio  = 0,
2421                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2422                 .tuner_type     = -1,
2423                 .tuner_addr     = ADDR_UNSET,
2424                 .radio_addr     = ADDR_UNSET,
2425         },
2426         [BTTV_BOARD_SPIRIT_TV] = {
2427                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2428                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2429                 .name           = "Spirit TV Tuner",
2430                 .video_inputs   = 3,
2431                 .audio_inputs   = 1,
2432                 .tuner          = 0,
2433                 .svhs           = 2,
2434                 .gpiomask       = 0x0000000f,
2435                 .muxsel         = { 2, 1, 1 },
2436                 .audiomux       = { 0x02, 0x00, 0x00, 0x00, 0x00 },
2437                 .tuner_type     = TUNER_TEMIC_PAL,
2438                 .tuner_addr     = ADDR_UNSET,
2439                 .radio_addr     = ADDR_UNSET,
2440                 .no_msp34xx     = 1,
2441                 .no_tda9875     = 1,
2442         },
2443         [BTTV_BOARD_AVDVBT_771] = {
2444                 /* Wolfram Joost <wojo@frokaschwei.de> */
2445                 .name           = "AVerMedia AVerTV DVB-T 771",
2446                 .video_inputs   = 2,
2447                 .svhs           = 1,
2448                 .tuner          = -1,
2449                 .tuner_type     = TUNER_ABSENT,
2450                 .tuner_addr     = ADDR_UNSET,
2451                 .radio_addr     = ADDR_UNSET,
2452                 .muxsel         = { 3 , 3 },
2453                 .no_msp34xx     = 1,
2454                 .no_tda9875     = 1,
2455                 .no_tda7432     = 1,
2456                 .pll            = PLL_28,
2457                 .has_dvb        = 1,
2458                 .no_gpioirq     = 1,
2459                 .has_remote     = 1,
2460         },
2461                 /* ---- card 0x7c ---------------------------------- */
2462         [BTTV_BOARD_AVDVBT_761] = {
2463                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2464                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2465                 .name           = "AverMedia AverTV DVB-T 761",
2466                 .video_inputs   = 2,
2467                 .tuner          = -1,
2468                 .svhs           = 1,
2469                 .muxsel         = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2470                 .no_msp34xx     = 1,
2471                 .no_tda9875     = 1,
2472                 .no_tda7432     = 1,
2473                 .pll            = PLL_28,
2474                 .tuner_type     = -1,
2475                 .tuner_addr     = ADDR_UNSET,
2476                 .radio_addr     = ADDR_UNSET,
2477                 .has_dvb        = 1,
2478                 .no_gpioirq     = 1,
2479                 .has_remote     = 1,
2480         },
2481         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2482                 /* andre.schwarz@matrix-vision.de */
2483                 .name             = "MATRIX Vision Sigma-SQ",
2484                 .video_inputs     = 16,
2485                 .audio_inputs     = 0,
2486                 .tuner            = -1,
2487                 .svhs             = -1,
2488                 .gpiomask         = 0x0,
2489                 .muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
2490                                 3, 3, 3, 3, 3, 3, 3, 3 },
2491                 .muxsel_hook      = sigmaSQ_muxsel,
2492                 .audiomux         = { 0 },
2493                 .no_msp34xx       = 1,
2494                 .pll              = PLL_28,
2495                 .tuner_type       = -1,
2496                 .tuner_addr       = ADDR_UNSET,
2497                 .radio_addr     = ADDR_UNSET,
2498         },
2499         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2500                 /* andre.schwarz@matrix-vision.de */
2501                 .name             = "MATRIX Vision Sigma-SLC",
2502                 .video_inputs     = 4,
2503                 .audio_inputs     = 0,
2504                 .tuner            = -1,
2505                 .svhs             = -1,
2506                 .gpiomask         = 0x0,
2507                 .muxsel           = { 2, 2, 2, 2 },
2508                 .muxsel_hook      = sigmaSLC_muxsel,
2509                 .audiomux         = { 0 },
2510                 .no_msp34xx       = 1,
2511                 .pll              = PLL_28,
2512                 .tuner_type       = -1,
2513                 .tuner_addr       = ADDR_UNSET,
2514                 .radio_addr     = ADDR_UNSET,
2515         },
2516                 /* BTTV_BOARD_APAC_VIEWCOMP */
2517         [BTTV_BOARD_APAC_VIEWCOMP] = {
2518                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2519                 /* bt878 TV + FM 0x00000000 subsystem ID */
2520                 .name           = "APAC Viewcomp 878(AMAX)",
2521                 .video_inputs   = 2,
2522                 .audio_inputs   = 1,
2523                 .tuner          = 0,
2524                 .svhs           = -1,
2525                 .gpiomask       = 0xFF,
2526                 .muxsel         = { 2, 3, 1, 1 },
2527                 .audiomux       = { 2, 0, 0, 0, 10 },
2528                 .needs_tvaudio  = 0,
2529                 .pll            = PLL_28,
2530                 .tuner_type     = TUNER_PHILIPS_PAL,
2531                 .tuner_addr     = ADDR_UNSET,
2532                 .radio_addr     = ADDR_UNSET,
2533                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2534                 .has_radio      = 1,   /* not every card has radio */
2535         },
2536
2537                 /* ---- card 0x80 ---------------------------------- */
2538         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2539                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2540                 .name           = "DViCO FusionHDTV DVB-T Lite",
2541                 .tuner          = -1,
2542                 .no_msp34xx     = 1,
2543                 .no_tda9875     = 1,
2544                 .no_tda7432     = 1,
2545                 .pll            = PLL_28,
2546                 .no_video       = 1,
2547                 .has_dvb        = 1,
2548                 .tuner_type     = -1,
2549                 .tuner_addr     = ADDR_UNSET,
2550                 .radio_addr     = ADDR_UNSET,
2551         },
2552         [BTTV_BOARD_VGEAR_MYVCD] = {
2553                 /* Steven <photon38@pchome.com.tw> */
2554                 .name           = "V-Gear MyVCD",
2555                 .video_inputs   = 3,
2556                 .audio_inputs   = 1,
2557                 .tuner          = 0,
2558                 .svhs           = 2,
2559                 .gpiomask       = 0x3f,
2560                 .muxsel         = {2, 3, 1, 0 },
2561                 .audiomux       = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31 },
2562                 .no_msp34xx     = 1,
2563                 .pll            = PLL_28,
2564                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2565                 .tuner_addr     = ADDR_UNSET,
2566                 .radio_addr     = ADDR_UNSET,
2567                 .has_radio      = 0,
2568         #if 0
2569                 .has_remote     = 1,
2570         #endif
2571         },
2572         [BTTV_BOARD_SUPER_TV] = {
2573                 /* Rick C <cryptdragoon@gmail.com> */
2574                 .name           = "Super TV Tuner",
2575                 .video_inputs   = 4,
2576                 .audio_inputs   = 1,
2577                 .tuner          = 0,
2578                 .svhs           = 2,
2579                 .muxsel         = { 2, 3, 1, 0 },
2580                 .tuner_type     = TUNER_PHILIPS_NTSC,
2581                 .tuner_addr     = ADDR_UNSET,
2582                 .radio_addr     = ADDR_UNSET,
2583                 .gpiomask       = 0x008007,
2584                 .audiomux       = { 0, 0x000001,0,0, 0 },
2585                 .needs_tvaudio  = 1,
2586                 .has_radio      = 1,
2587         },
2588         [BTTV_BOARD_TIBET_CS16] = {
2589                 /* Chris Fanning <video4linux@haydon.net> */
2590                 .name           = "Tibet Systems 'Progress DVR' CS16",
2591                 .video_inputs   = 16,
2592                 .audio_inputs   = 0,
2593                 .tuner          = -1,
2594                 .svhs           = -1,
2595                 .muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2596                 .pll            = PLL_28,
2597                 .no_msp34xx     = 1,
2598                 .no_tda9875     = 1,
2599                 .no_tda7432     = 1,
2600                 .tuner_type     = -1,
2601                 .tuner_addr     = ADDR_UNSET,
2602                 .radio_addr     = ADDR_UNSET,
2603                 .muxsel_hook    = tibetCS16_muxsel,
2604         },
2605         [BTTV_BOARD_KODICOM_4400R] = {
2606                 /* Bill Brack <wbrack@mmm.com.hk> */
2607                 /*
2608                 * Note that, because of the card's wiring, the "master"
2609                 * BT878A chip (i.e. the one which controls the analog switch
2610                 * and must use this card type) is the 2nd one detected.  The
2611                 * other 3 chips should use card type 0x85, whose description
2612                 * follows this one.  There is a EEPROM on the card (which is
2613                 * connected to the I2C of one of those other chips), but is
2614                 * not currently handled.  There is also a facility for a
2615                 * "monitor", which is also not currently implemented.
2616                 */
2617                 .name           = "Kodicom 4400R (master)",
2618                 .video_inputs   = 16,
2619                 .audio_inputs   = 0,
2620                 .tuner          = -1,
2621                 .tuner_type     = -1,
2622                 .tuner_addr     = ADDR_UNSET,
2623                 .radio_addr     = ADDR_UNSET,
2624                 .svhs           = -1,
2625                 /* GPIO bits 0-9 used for analog switch:
2626                 *   00 - 03:    camera selector
2627                 *   04 - 06:    channel (controller) selector
2628                 *   07: data (1->on, 0->off)
2629                 *   08: strobe
2630                 *   09: reset
2631                 * bit 16 is input from sync separator for the channel
2632                 */
2633                 .gpiomask       = 0x0003ff,
2634                 .no_gpioirq     = 1,
2635                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2636                 .pll            = PLL_28,
2637                 .no_msp34xx     = 1,
2638                 .no_tda7432     = 1,
2639                 .no_tda9875     = 1,
2640                 .muxsel_hook    = kodicom4400r_muxsel,
2641         },
2642         [BTTV_BOARD_KODICOM_4400R_SL] = {
2643                 /* Bill Brack <wbrack@mmm.com.hk> */
2644                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2645                 * one which controls the analog switch, and must use the card type)
2646                 * is the 2nd one detected.  The other 3 chips should use this card
2647                 * type
2648                 */
2649                 .name           = "Kodicom 4400R (slave)",
2650                 .video_inputs   = 16,
2651                 .audio_inputs   = 0,
2652                 .tuner          = -1,
2653                 .tuner_type     = -1,
2654                 .tuner_addr     = ADDR_UNSET,
2655                 .radio_addr     = ADDR_UNSET,
2656                 .svhs           = -1,
2657                 .gpiomask       = 0x010000,
2658                 .no_gpioirq     = 1,
2659                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2660                 .pll            = PLL_28,
2661                 .no_msp34xx     = 1,
2662                 .no_tda7432     = 1,
2663                 .no_tda9875     = 1,
2664                 .muxsel_hook    = kodicom4400r_muxsel,
2665         },
2666                 /* ---- card 0x86---------------------------------- */
2667         [BTTV_BOARD_ADLINK_RTV24] = {
2668                 /* Michael Henson <mhenson@clarityvi.com> */
2669                 /* Adlink RTV24 with special unlock codes */
2670                 .name           = "Adlink RTV24",
2671                 .video_inputs   = 4,
2672                 .audio_inputs   = 1,
2673                 .tuner          = 0,
2674                 .svhs           = 2,
2675                 .muxsel         = { 2, 3, 1, 0 },
2676                 .tuner_type     = -1,
2677                 .tuner_addr     = ADDR_UNSET,
2678                 .radio_addr     = ADDR_UNSET,
2679                 .pll            = PLL_28,
2680         },
2681                 /* ---- card 0x87---------------------------------- */
2682         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2683                 /* Michael Krufky <mkrufky@m1k.net> */
2684                 .name           = "DViCO FusionHDTV 5 Lite",
2685                 .tuner          = 0,
2686                 .tuner_type     = TUNER_LG_TDVS_H062F,
2687                 .tuner_addr     = ADDR_UNSET,
2688                 .radio_addr     = ADDR_UNSET,
2689                 .video_inputs   = 3,
2690                 .audio_inputs   = 1,
2691                 .svhs           = 2,
2692                 .muxsel         = { 2, 3, 1 },
2693                 .gpiomask       = 0x00e00007,
2694                 .audiomux       = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 },
2695                 .no_msp34xx     = 1,
2696                 .no_tda9875     = 1,
2697                 .no_tda7432     = 1,
2698                 .has_dvb        = 1,
2699         },
2700                 /* ---- card 0x88---------------------------------- */
2701         [BTTV_BOARD_ACORP_Y878F] = {
2702                 /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
2703                 .name           = "Acorp Y878F",
2704                 .video_inputs   = 3,
2705                 .audio_inputs   = 1,
2706                 .tuner          = 0,
2707                 .svhs           = 2,
2708                 .gpiomask       = 0x01fe00,
2709                 .muxsel         = { 2, 3, 1, 1 },
2710                 .audiomux       = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
2711                 .needs_tvaudio  = 1,
2712                 .pll            = PLL_28,
2713                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2714                 .tuner_addr     = 0xc1 >>1,
2715                 .radio_addr     = 0xc1 >>1,
2716                 .has_radio      = 1,
2717         },
2718                 /* ---- card 0x89 ---------------------------------- */
2719         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2720                 .name           = "Conceptronic CTVFMi v2",
2721                 .video_inputs   = 3,
2722                 .audio_inputs   = 1,
2723                 .tuner          = 0,
2724                 .svhs           = 2,
2725                 .gpiomask       = 0x001c0007,
2726                 .muxsel         = { 2, 3, 1, 1 },
2727                 .audiomux       = { 0, 1, 2, 2, 3 },
2728                 .needs_tvaudio  = 0,
2729                 .pll            = PLL_28,
2730                 .tuner_type     = TUNER_TENA_9533_DI,
2731                 .tuner_addr     = ADDR_UNSET,
2732                 .radio_addr     = ADDR_UNSET,
2733                 .has_remote     = 1,
2734                 .has_radio      = 1,
2735         },
2736                 /* ---- card 0x8a ---------------------------------- */
2737         [BTTV_BOARD_PV_BT878P_2E] = {
2738                 .name          = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2739                 .video_inputs  = 5,
2740                 .audio_inputs  = 1,
2741                 .tuner         = 0,
2742                 .svhs          = 3,
2743                 .gpiomask      = 0x01fe00,
2744                 .muxsel        = { 2,3,1,1,-1 },
2745                 .digital_mode  = DIGITAL_MODE_CAMERA,
2746                 .audiomux      = { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000  },
2747                 .no_msp34xx    = 1,
2748                 .pll           = PLL_28,
2749                 .tuner_type    = TUNER_LG_PAL_FM,
2750                 .tuner_addr     = ADDR_UNSET,
2751                 .radio_addr     = ADDR_UNSET,
2752                 .has_remote    = 1,
2753         },
2754                 /* ---- card 0x8b ---------------------------------- */
2755         [BTTV_BOARD_PV_M4900] = {
2756                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2757                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2758                 .video_inputs   = 3,
2759                 .audio_inputs   = 1,
2760                 .tuner          = 0,
2761                 .svhs           = 2,
2762                 .gpiomask       = 0x3f,
2763                 .muxsel         = { 2, 3, 1, 1 },
2764                 .audiomux       = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
2765                 .no_msp34xx     = 1,
2766                 .pll            = PLL_28,
2767                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2768                 .tuner_addr     = ADDR_UNSET,
2769                 .radio_addr     = ADDR_UNSET,
2770                 .has_radio      = 1,
2771                 .has_remote     = 1,
2772         },
2773                 /* ---- card 0x8c ---------------------------------- */
2774         [BTTV_BOARD_OSPREY440]  = {
2775                 .name           = "Osprey 440",
2776                 .video_inputs   = 1,
2777                 .audio_inputs   = 1,
2778                 .tuner          = -1,
2779                 .svhs           = 1,
2780                 .muxsel         = { 2 },
2781                 .pll            = PLL_28,
2782                 .tuner_type     = UNSET,
2783                 .tuner_addr     = ADDR_UNSET,
2784                 .radio_addr     = ADDR_UNSET,
2785                 .no_msp34xx     = 1,
2786                 .no_tda9875     = 1,
2787                 .no_tda7432     = 1,
2788         },
2789                 /* ---- card 0x8d ---------------------------------- */
2790         [BTTV_BOARD_ASOUND_SKYEYE] = {
2791                 .name           = "Asound Skyeye PCTV",
2792                 .video_inputs   = 3,
2793                 .audio_inputs   = 1,
2794                 .tuner          = 0,
2795                 .svhs           = 2,
2796                 .gpiomask       = 15,
2797                 .muxsel         = { 2, 3, 1, 1 },
2798                 .audiomux       = { 2, 0, 0, 0, 1 },
2799                 .needs_tvaudio  = 1,
2800                 .pll            = PLL_28,
2801                 .tuner_type     = 2,
2802                 .tuner_addr     = ADDR_UNSET,
2803                 .radio_addr     = ADDR_UNSET,
2804         },
2805                 /* ---- card 0x8e ---------------------------------- */
2806         [BTTV_BOARD_SABRENT_TVFM] = {
2807                 .name           = "Sabrent TV-FM (bttv version)",
2808                 .video_inputs   = 3,
2809                 .audio_inputs   = 1,
2810                 .tuner          = 0,
2811                 .svhs           = 2,
2812                 .gpiomask       = 0x108007,
2813                 .muxsel         = { 2, 3, 1, 1 },
2814                 .audiomux       = { 100000, 100002, 100002, 100000 },
2815                 .no_msp34xx     = 1,
2816                 .no_tda9875     = 1,
2817                 .no_tda7432     = 1,
2818                 .pll            = PLL_28,
2819                 .tuner_type     = TUNER_TNF_5335MF,
2820                 .tuner_addr     = ADDR_UNSET,
2821                 .has_radio      = 1,
2822         },
2823         /* ---- card 0x8f ---------------------------------- */
2824         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2825                 .name           = "Hauppauge ImpactVCB (bt878)",
2826                 .video_inputs   = 4,
2827                 .audio_inputs   = 0,
2828                 .tuner          = -1,
2829                 .svhs           = -1,
2830                 .gpiomask       = 0x0f, /* old: 7 */
2831                 .muxsel         = { 0, 1, 3, 2 }, /* Composite 0-3 */
2832                 .no_msp34xx     = 1,
2833                 .no_tda9875     = 1,
2834                 .no_tda7432     = 1,
2835                 .tuner_type     = -1,
2836                 .tuner_addr     = ADDR_UNSET,
2837                 .radio_addr     = ADDR_UNSET,
2838         },
2839         [BTTV_BOARD_MACHTV_MAGICTV] = {
2840                 /* Julian Calaby <julian.calaby@gmail.com>
2841                  * Slightly different from original MachTV definition (0x60)
2842
2843                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2844                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2845                  * properly (methinks) causing no keyup bits being set */
2846
2847                 .name           = "MagicTV", /* rebranded MachTV */
2848                 .video_inputs   = 3,
2849                 .audio_inputs   = 1,
2850                 .tuner          = 0,
2851                 .svhs           = 2,
2852                 .gpiomask       = 7,
2853                 .muxsel         = { 2, 3, 1, 1 },
2854                 .audiomux       = { 0, 1, 2, 3, 4 },
2855                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2856                 .tuner_addr     = ADDR_UNSET,
2857                 .radio_addr     = ADDR_UNSET,
2858                 .pll            = PLL_28,
2859                 .has_radio      = 1,
2860                 .has_remote     = 1,
2861         },
2862 };
2863
2864 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2865
2866 /* ----------------------------------------------------------------------- */
2867
2868 static unsigned char eeprom_data[256];
2869
2870 /*
2871  * identify card
2872  */
2873 void __devinit bttv_idcard(struct bttv *btv)
2874 {
2875         unsigned int gpiobits;
2876         int i,type;
2877         unsigned short tmp;
2878
2879         /* read PCI subsystem ID */
2880         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2881         btv->cardid = tmp << 16;
2882         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2883         btv->cardid |= tmp;
2884
2885         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2886                 /* look for the card */
2887                 for (type = -1, i = 0; cards[i].id != 0; i++)
2888                         if (cards[i].id  == btv->cardid)
2889                                 type = i;
2890
2891                 if (type != -1) {
2892                         /* found it */
2893                         printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2894                                "PCI subsystem ID is %04x:%04x\n",
2895                                btv->c.nr,cards[type].name,cards[type].cardnr,
2896                                btv->cardid & 0xffff,
2897                                (btv->cardid >> 16) & 0xffff);
2898                         btv->c.type = cards[type].cardnr;
2899                 } else {
2900                         /* 404 */
2901                         printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2902                                btv->c.nr, btv->cardid & 0xffff,
2903                                (btv->cardid >> 16) & 0xffff);
2904                         printk(KERN_DEBUG "please mail id, board name and "
2905                                "the correct card= insmod option to video4linux-list@redhat.com\n");
2906                 }
2907         }
2908
2909         /* let the user override the autodetected type */
2910         if (card[btv->c.nr] < bttv_num_tvcards)
2911                 btv->c.type=card[btv->c.nr];
2912
2913         /* print which card config we are using */
2914         printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2915                bttv_tvcards[btv->c.type].name, btv->c.type,
2916                card[btv->c.nr] < bttv_num_tvcards
2917                ? "insmod option" : "autodetected");
2918
2919         /* overwrite gpio stuff ?? */
2920         if (UNSET == audioall && UNSET == audiomux[0])
2921                 return;
2922
2923         if (UNSET != audiomux[0]) {
2924                 gpiobits = 0;
2925                 for (i = 0; i < 5; i++) {
2926                         bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
2927                         gpiobits |= audiomux[i];
2928                 }
2929         } else {
2930                 gpiobits = audioall;
2931                 for (i = 0; i < 5; i++) {
2932                         bttv_tvcards[btv->c.type].audiomux[i] = audioall;
2933                 }
2934         }
2935         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2936         printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2937                btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2938         for (i = 0; i < 5; i++) {
2939                 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
2940         }
2941         printk("\n");
2942 }
2943
2944 /*
2945  * (most) board specific initialisations goes here
2946  */
2947
2948 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2949 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2950 {
2951         int type = -1;
2952
2953         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2954                 type = BTTV_BOARD_MODTEC_205;
2955         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2956                 type = BTTV_BOARD_EURESYS_PICOLO;
2957         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2958                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2959
2960         if (-1 != type) {
2961                 btv->c.type = type;
2962                 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2963                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2964         }
2965 }
2966
2967 static void flyvideo_gpio(struct bttv *btv)
2968 {
2969         int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
2970         int tuner=-1,ttype;
2971
2972         gpio_inout(0xffffff, 0);
2973         udelay(8);  /* without this we would see the 0x1800 mask */
2974         gpio = gpio_read();
2975         /* FIXME: must restore OUR_EN ??? */
2976
2977         /* all cards provide GPIO info, some have an additional eeprom
2978          * LR50: GPIO coding can be found lower right CP1 .. CP9
2979          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2980          *       GPIO14-12: n.c.
2981          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2982
2983          * lowest 3 bytes are remote control codes (no handshake needed)
2984          * xxxFFF: No remote control chip soldered
2985          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2986          * Note: Some bits are Audio_Mask !
2987          */
2988         ttype=(gpio&0x0f0000)>>16;
2989         switch(ttype) {
2990         case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
2991                 break;
2992         case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
2993                 break;
2994         case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2995                 break;
2996         case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
2997                 break;
2998                 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2999                 break;
3000         default:
3001                 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3002         }
3003
3004         has_remote          =   gpio & 0x800000;
3005         has_radio           =   gpio & 0x400000;
3006         /*   unknown                   0x200000;
3007          *   unknown2                  0x100000; */
3008         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3009         has_tda9820_tda9821 = !(gpio & 0x004000);
3010         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3011         /*
3012          * gpio & 0x001000    output bit for audio routing */
3013
3014         if(is_capture_only)
3015                 tuner=4; /* No tuner present */
3016
3017         printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3018                btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
3019         printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3020                 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
3021                 is_capture_only?"yes":"no ");
3022
3023         if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
3024                 btv->tuner_type = tuner;
3025         btv->has_radio = has_radio;
3026
3027         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3028          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3029          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3030         if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
3031         /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
3032 }
3033
3034 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3035                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3036 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3037                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3038
3039 static void miro_pinnacle_gpio(struct bttv *btv)
3040 {
3041         int id,msp,gpio;
3042         char *info;
3043
3044         gpio_inout(0xffffff, 0);
3045         gpio = gpio_read();
3046         id   = ((gpio>>10) & 63) -1;
3047         msp  = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
3048         if (id < 32) {
3049                 btv->tuner_type = miro_tunermap[id];
3050                 if (0 == (gpio & 0x20)) {
3051                         btv->has_radio = 1;
3052                         if (!miro_fmtuner[id]) {
3053                                 btv->has_matchbox = 1;
3054                                 btv->mbox_we    = (1<<6);
3055                                 btv->mbox_most  = (1<<7);
3056                                 btv->mbox_clk   = (1<<8);
3057                                 btv->mbox_data  = (1<<9);
3058                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3059                         }
3060                 } else {
3061                         btv->has_radio = 0;
3062                 }
3063                 if (-1 != msp) {
3064                         if (btv->c.type == BTTV_BOARD_MIRO)
3065                                 btv->c.type = BTTV_BOARD_MIROPRO;
3066                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3067                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3068                 }
3069                 printk(KERN_INFO
3070                        "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3071                        btv->c.nr, id+1, btv->tuner_type,
3072                        !btv->has_radio ? "no" :
3073                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
3074                        (-1 == msp) ? "no" : "yes");
3075         } else {
3076                 /* new cards with microtune tuner */
3077                 id = 63 - id;
3078                 btv->has_radio = 0;
3079                 switch (id) {
3080                 case 1:
3081                         info = "PAL / mono";
3082                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3083                         break;
3084                 case 2:
3085                         info = "PAL+SECAM / stereo";
3086                         btv->has_radio = 1;
3087                         btv->tda9887_conf = TDA9887_QSS;
3088                         break;
3089                 case 3:
3090                         info = "NTSC / stereo";
3091                         btv->has_radio = 1;
3092                         btv->tda9887_conf = TDA9887_QSS;
3093                         break;
3094                 case 4:
3095                         info = "PAL+SECAM / mono";
3096                         btv->tda9887_conf = TDA9887_QSS;
3097                         break;
3098                 case 5:
3099                         info = "NTSC / mono";
3100                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3101                         break;
3102                 case 6:
3103                         info = "NTSC / stereo";
3104                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3105                         break;
3106                 case 7:
3107                         info = "PAL / stereo";
3108                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3109                         break;
3110                 default:
3111                         info = "oops: unknown card";
3112                         break;
3113                 }
3114                 if (-1 != msp)
3115                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3116                 printk(KERN_INFO
3117                        "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3118                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3119                 btv->tuner_type = TUNER_MT2032;
3120         }
3121 }
3122
3123 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3124 #define LM1882_SYNC_DRIVE     0x200000L
3125
3126 static void init_ids_eagle(struct bttv *btv)
3127 {
3128         gpio_inout(0xffffff,0xFFFF37);
3129         gpio_write(0x200020);
3130
3131         /* flash strobe inverter ?! */
3132         gpio_write(0x200024);
3133
3134         /* switch sync drive off */
3135         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3136
3137         /* set BT848 muxel to 2 */
3138         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3139 }
3140
3141 /* Muxsel helper for the IDS Eagle.
3142  * the eagles does not use the standard muxsel-bits but
3143  * has its own multiplexer */
3144 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3145 {
3146         btaor((2)<<5, ~(3<<5), BT848_IFORM);
3147         gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3148
3149        /* composite */
3150        /* set chroma ADC to sleep */
3151        btor(BT848_ADC_C_SLEEP, BT848_ADC);
3152        /* set to composite video */
3153        btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3154        btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3155
3156        /* switch sync drive off */
3157        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3158 }
3159
3160 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3161 {
3162         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3163         gpio_write(masks[input%4]);
3164 }
3165
3166 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3167    alarms output
3168
3169    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3170    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3171
3172    IN - sensor inputs, INx - sensor inputs and TI XORed together
3173    O1,O2,O3 - alarm outputs (relays)
3174
3175    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3176
3177 */
3178
3179 static void init_lmlbt4x(struct bttv *btv)
3180 {
3181         printk(KERN_DEBUG "LMLBT4x init\n");
3182         btwrite(0x000000, BT848_GPIO_REG_INP);
3183         gpio_inout(0xffffff, 0x0006C0);
3184         gpio_write(0x000000);
3185 }
3186
3187 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3188 {
3189         unsigned int inmux = input % 8;
3190         gpio_inout( 0xf, 0xf );
3191         gpio_bits( 0xf, inmux );
3192 }
3193
3194 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3195 {
3196         unsigned int inmux = input % 4;
3197         gpio_inout( 3<<9, 3<<9 );
3198         gpio_bits( 3<<9, inmux<<9 );
3199 }
3200
3201 /* ----------------------------------------------------------------------- */
3202
3203 static void bttv_reset_audio(struct bttv *btv)
3204 {
3205         /*
3206          * BT878A has a audio-reset register.
3207          * 1. This register is an audio reset function but it is in
3208          *    function-0 (video capture) address space.
3209          * 2. It is enough to do this once per power-up of the card.
3210          * 3. There is a typo in the Conexant doc -- it is not at
3211          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3212          * --//Shrikumar 030609
3213          */
3214         if (btv->id != 878)
3215                 return;
3216
3217         if (bttv_debug)
3218                 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3219         btwrite((1<<7), 0x058);
3220         udelay(10);
3221         btwrite(     0, 0x058);
3222 }
3223
3224 /* initialization part one -- before registering i2c bus */
3225 void __devinit bttv_init_card1(struct bttv *btv)
3226 {
3227         switch (btv->c.type) {
3228         case BTTV_BOARD_HAUPPAUGE:
3229         case BTTV_BOARD_HAUPPAUGE878:
3230                 boot_msp34xx(btv,5);
3231                 break;
3232         case BTTV_BOARD_VOODOOTV_FM:
3233                 boot_msp34xx(btv,20);
3234                 break;
3235         case BTTV_BOARD_AVERMEDIA98:
3236                 boot_msp34xx(btv,11);
3237                 break;
3238         case BTTV_BOARD_HAUPPAUGEPVR:
3239                 pvr_boot(btv);
3240                 break;
3241         case BTTV_BOARD_TWINHAN_DST:
3242         case BTTV_BOARD_AVDVBT_771:
3243         case BTTV_BOARD_PINNACLESAT:
3244                 btv->use_i2c_hw = 1;
3245                 break;
3246         case BTTV_BOARD_ADLINK_RTV24:
3247                 init_RTV24( btv );
3248                 break;
3249
3250         }
3251         if (!bttv_tvcards[btv->c.type].has_dvb)
3252                 bttv_reset_audio(btv);
3253 }
3254
3255 /* initialization part two -- after registering i2c bus */
3256 void __devinit bttv_init_card2(struct bttv *btv)
3257 {
3258         int tda9887;
3259         int addr=ADDR_UNSET;
3260
3261         btv->tuner_type = -1;
3262
3263         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3264                 bttv_readee(btv,eeprom_data,0xa0);
3265                 identify_by_eeprom(btv,eeprom_data);
3266         }
3267
3268         switch (btv->c.type) {
3269         case BTTV_BOARD_MIRO:
3270         case BTTV_BOARD_MIROPRO:
3271         case BTTV_BOARD_PINNACLE:
3272         case BTTV_BOARD_PINNACLEPRO:
3273                 /* miro/pinnacle */
3274                 miro_pinnacle_gpio(btv);
3275                 break;
3276         case BTTV_BOARD_FLYVIDEO_98:
3277         case BTTV_BOARD_MAXI:
3278         case BTTV_BOARD_LIFE_FLYKIT:
3279         case BTTV_BOARD_FLYVIDEO:
3280         case BTTV_BOARD_TYPHOON_TVIEW:
3281         case BTTV_BOARD_CHRONOS_VS2:
3282         case BTTV_BOARD_FLYVIDEO_98FM:
3283         case BTTV_BOARD_FLYVIDEO2000:
3284         case BTTV_BOARD_FLYVIDEO98EZ:
3285         case BTTV_BOARD_CONFERENCETV:
3286         case BTTV_BOARD_LIFETEC_9415:
3287                 flyvideo_gpio(btv);
3288                 break;
3289         case BTTV_BOARD_HAUPPAUGE:
3290         case BTTV_BOARD_HAUPPAUGE878:
3291         case BTTV_BOARD_HAUPPAUGEPVR:
3292                 /* pick up some config infos from the eeprom */
3293                 bttv_readee(btv,eeprom_data,0xa0);
3294                 hauppauge_eeprom(btv);
3295                 break;
3296         case BTTV_BOARD_AVERMEDIA98:
3297         case BTTV_BOARD_AVPHONE98:
3298                 bttv_readee(btv,eeprom_data,0xa0);
3299                 avermedia_eeprom(btv);
3300                 break;
3301         case BTTV_BOARD_PXC200:
3302                 init_PXC200(btv);
3303                 break;
3304         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3305                 picolo_tetra_init(btv);
3306                 break;
3307         case BTTV_BOARD_VHX:
3308                 btv->has_radio    = 1;
3309                 btv->has_matchbox = 1;
3310                 btv->mbox_we      = 0x20;
3311                 btv->mbox_most    = 0;
3312                 btv->mbox_clk     = 0x08;
3313                 btv->mbox_data    = 0x10;
3314                 btv->mbox_mask    = 0x38;
3315                 break;
3316         case BTTV_BOARD_VOBIS_BOOSTAR:
3317         case BTTV_BOARD_TERRATV:
3318                 terratec_active_radio_upgrade(btv);
3319                 break;
3320         case BTTV_BOARD_MAGICTVIEW061:
3321                 if (btv->cardid == 0x3002144f) {
3322                         btv->has_radio=1;
3323                         printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3324                 }
3325                 break;
3326        case BTTV_BOARD_STB2:
3327                 if (btv->cardid == 0x3060121a) {
3328                         /* Fix up entry for 3DFX VoodooTV 100,
3329                            which is an OEM STB card variant. */
3330                         btv->has_radio=0;
3331                         btv->tuner_type=TUNER_TEMIC_NTSC;
3332                 }
3333                 break;
3334         case BTTV_BOARD_OSPREY1x0:
3335         case BTTV_BOARD_OSPREY1x0_848:
3336         case BTTV_BOARD_OSPREY101_848:
3337         case BTTV_BOARD_OSPREY1x1:
3338         case BTTV_BOARD_OSPREY1x1_SVID:
3339         case BTTV_BOARD_OSPREY2xx:
3340         case BTTV_BOARD_OSPREY2x0_SVID:
3341         case BTTV_BOARD_OSPREY2x0:
3342         case BTTV_BOARD_OSPREY500:
3343         case BTTV_BOARD_OSPREY540:
3344         case BTTV_BOARD_OSPREY2000:
3345                 bttv_readee(btv,eeprom_data,0xa0);
3346                 osprey_eeprom(btv);
3347                 break;
3348         case BTTV_BOARD_IDS_EAGLE:
3349                 init_ids_eagle(btv);
3350                 break;
3351         case BTTV_BOARD_MODTEC_205:
3352                 bttv_readee(btv,eeprom_data,0xa0);
3353                 modtec_eeprom(btv);
3354                 break;
3355         case BTTV_BOARD_LMLBT4:
3356                 init_lmlbt4x(btv);
3357                 break;
3358         case BTTV_BOARD_TIBET_CS16:
3359                 tibetCS16_init(btv);
3360                 break;
3361         case BTTV_BOARD_KODICOM_4400R:
3362                 kodicom4400r_init(btv);
3363                 break;
3364         }
3365
3366         /* pll configuration */
3367         if (!(btv->id==848 && btv->revision==0x11)) {
3368                 /* defaults from card list */
3369                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3370                         btv->pll.pll_ifreq=28636363;
3371                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3372                 }
3373                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3374                         btv->pll.pll_ifreq=35468950;
3375                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3376                 }
3377                 /* insmod options can override */
3378                 switch (pll[btv->c.nr]) {
3379                 case 0: /* none */
3380                         btv->pll.pll_crystal = 0;
3381                         btv->pll.pll_ifreq   = 0;
3382                         btv->pll.pll_ofreq   = 0;
3383                         break;
3384                 case 1: /* 28 MHz */
3385                 case 28:
3386                         btv->pll.pll_ifreq   = 28636363;
3387                         btv->pll.pll_ofreq   = 0;
3388                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3389                         break;
3390                 case 2: /* 35 MHz */
3391                 case 35:
3392                         btv->pll.pll_ifreq   = 35468950;
3393                         btv->pll.pll_ofreq   = 0;
3394                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3395                         break;
3396                 }
3397         }
3398         btv->pll.pll_current = -1;
3399
3400         /* tuner configuration (from card list / autodetect / insmod option) */
3401         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3402                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3403
3404         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3405                 if(UNSET == btv->tuner_type)
3406                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3407         if (UNSET != tuner[btv->c.nr])
3408                 btv->tuner_type = tuner[btv->c.nr];
3409         printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
3410
3411         if (btv->tuner_type != UNSET) {
3412                 struct tuner_setup tun_setup;
3413
3414                 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3415                 tun_setup.type = btv->tuner_type;
3416                 tun_setup.addr = addr;
3417
3418                 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3419         }
3420
3421         if (btv->tda9887_conf) {
3422                 bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG,
3423                                                         &btv->tda9887_conf);
3424         }
3425
3426         btv->svhs = bttv_tvcards[btv->c.type].svhs;
3427         if (svhs[btv->c.nr] != UNSET)
3428                 btv->svhs = svhs[btv->c.nr];
3429         if (remote[btv->c.nr] != UNSET)
3430                 btv->has_remote = remote[btv->c.nr];
3431
3432         if (bttv_tvcards[btv->c.type].has_radio)
3433                 btv->has_radio=1;
3434         if (bttv_tvcards[btv->c.type].has_remote)
3435                 btv->has_remote=1;
3436         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3437                 btv->gpioirq=1;
3438         if (bttv_tvcards[btv->c.type].audio_hook)
3439                 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
3440
3441         if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3442                 /* detect Bt832 chip for quartzsight digital camera */
3443                 if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
3444                     (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
3445                         boot_bt832(btv);
3446         }
3447
3448         if (!autoload)
3449                 return;
3450
3451         /* try to detect audio/fader chips */
3452         if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3453             bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
3454                 request_module("msp3400");
3455
3456         if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3457             bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3458                 request_module("msp3400");
3459
3460         if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3461             bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
3462                 request_module("tda9875");
3463
3464         if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3465             bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
3466                 request_module("tda7432");
3467
3468         if (bttv_tvcards[btv->c.type].needs_tvaudio)
3469                 request_module("tvaudio");
3470
3471         /* tuner modules */
3472         tda9887 = 0;
3473         if (btv->tda9887_conf)
3474                 tda9887 = 1;
3475         if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
3476             bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
3477                 tda9887 = 1;
3478         /* Hybrid DVB card, DOES have a tda9887 */
3479         if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
3480                 tda9887 = 1;
3481         if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
3482            (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
3483            (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
3484             tda9887)
3485                 request_module("tda9887");
3486         if (btv->tuner_type != UNSET)
3487                 request_module("tuner");
3488 }
3489
3490
3491 /* ----------------------------------------------------------------------- */
3492
3493 static void modtec_eeprom(struct bttv *btv)
3494 {
3495         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3496                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3497                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3498                        btv->c.nr,&eeprom_data[0x1e]);
3499         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3500                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3501                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3502                        btv->c.nr,&eeprom_data[0x1e]);
3503         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3504                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3505                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3506                        btv->c.nr,&eeprom_data[0x1e]);
3507         } else {
3508                 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3509                        btv->c.nr,&eeprom_data[0x1e]);
3510         }
3511 }
3512
3513 static void __devinit hauppauge_eeprom(struct bttv *btv)
3514 {
3515         struct tveeprom tv;
3516
3517         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3518         btv->tuner_type = tv.tuner_type;
3519         btv->has_radio  = tv.has_radio;
3520
3521         printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3522                 btv->c.nr, tv.model);
3523
3524         /*
3525          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3526          * type based on model #.
3527          */
3528         if(tv.model == 64900) {
3529                 printk("bttv%d: Switching board type from %s to %s\n",
3530                         btv->c.nr,
3531                         bttv_tvcards[btv->c.type].name,
3532                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3533                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3534         }
3535 }
3536
3537 static int terratec_active_radio_upgrade(struct bttv *btv)
3538 {
3539         int freq;
3540
3541         btv->has_radio    = 1;
3542         btv->has_matchbox = 1;
3543         btv->mbox_we      = 0x10;
3544         btv->mbox_most    = 0x20;
3545         btv->mbox_clk     = 0x08;
3546         btv->mbox_data    = 0x04;
3547         btv->mbox_mask    = 0x3c;
3548
3549         btv->mbox_iow     = 1 <<  8;
3550         btv->mbox_ior     = 1 <<  9;
3551         btv->mbox_csel    = 1 << 10;
3552
3553         freq=88000/62.5;
3554         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3555         if (0x1ed8 == tea5757_read(btv)) {
3556                 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3557                        btv->c.nr);
3558                 btv->has_radio    = 1;
3559                 btv->has_matchbox = 1;
3560         } else {
3561                 btv->has_radio    = 0;
3562                 btv->has_matchbox = 0;
3563         }
3564         return 0;
3565 }
3566
3567
3568 /* ----------------------------------------------------------------------- */
3569
3570 /*
3571  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3572  *
3573  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3574  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3575  * unpacked with unzip).
3576  */
3577 #define PVR_GPIO_DELAY          10
3578
3579 #define BTTV_ALT_DATA           0x000001
3580 #define BTTV_ALT_DCLK           0x100000
3581 #define BTTV_ALT_NCONFIG        0x800000
3582
3583 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3584 {
3585         u32 n;
3586         u8 bits;
3587         int i;
3588
3589         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3590         gpio_write(0);
3591         udelay(PVR_GPIO_DELAY);
3592
3593         gpio_write(BTTV_ALT_NCONFIG);
3594         udelay(PVR_GPIO_DELAY);
3595
3596         for (n = 0; n < microlen; n++) {
3597                 bits = micro[n];
3598                 for ( i = 0 ; i < 8 ; i++ ) {
3599                         gpio_bits(BTTV_ALT_DCLK,0);
3600                         if (bits & 0x01)
3601                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3602                         else
3603                                 gpio_bits(BTTV_ALT_DATA,0);
3604                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3605                         bits >>= 1;
3606                 }
3607         }
3608         gpio_bits(BTTV_ALT_DCLK,0);
3609         udelay(PVR_GPIO_DELAY);
3610
3611         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3612         for (i = 0 ; i < 30 ; i++) {
3613                 gpio_bits(BTTV_ALT_DCLK,0);
3614                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3615         }
3616         gpio_bits(BTTV_ALT_DCLK,0);
3617         return 0;
3618 }
3619
3620 static int __devinit pvr_boot(struct bttv *btv)
3621 {
3622         const struct firmware *fw_entry;
3623         int rc;
3624
3625         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3626         if (rc != 0) {
3627                 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3628                        btv->c.nr);
3629                 return rc;
3630         }
3631         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3632         printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3633                btv->c.nr, (rc < 0) ? "failed" : "ok");
3634         release_firmware(fw_entry);
3635         return rc;
3636 }
3637
3638 /* ----------------------------------------------------------------------- */
3639 /* some osprey specific stuff                                              */
3640
3641 static void __devinit osprey_eeprom(struct bttv *btv)
3642 {
3643        int i = 0;
3644        unsigned char *ee = eeprom_data;
3645        unsigned long serial = 0;
3646
3647        if (btv->c.type == 0) {
3648                /* this might be an antique... check for MMAC label in eeprom */
3649                if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3650                        unsigned char checksum = 0;
3651                        for (i =0; i<21; i++)
3652                                checksum += ee[i];
3653                        if (checksum != ee[21])
3654                                return;
3655                        btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3656                        for (i = 12; i < 21; i++)
3657                                serial *= 10, serial += ee[i] - '0';
3658                }
3659        } else {
3660                unsigned short type;
3661                int offset = 4*16;
3662
3663                for(; offset < 8*16; offset += 16) {
3664                        unsigned short checksum = 0;
3665                        /* verify the checksum */
3666                        for(i = 0; i<14; i++) checksum += ee[i+offset];
3667                                checksum = ~checksum;  /* no idea why */
3668                                if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3669                                    ((checksum & 0x0FF) == ee[offset+15])) {
3670                                break;
3671                        }
3672                }
3673
3674                if (offset >= 8*16)
3675                        return;
3676
3677                /* found a valid descriptor */
3678                type = (ee[offset+4]<<8) | (ee[offset+5]);
3679
3680                switch(type) {
3681
3682                /* 848 based */
3683                case 0x0004:
3684                        btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3685                        break;
3686                case 0x0005:
3687                        btv->c.type = BTTV_BOARD_OSPREY101_848;
3688                        break;
3689
3690                /* 878 based */
3691                case 0x0012:
3692                case 0x0013:
3693                        btv->c.type = BTTV_BOARD_OSPREY1x0;
3694                        break;
3695                case 0x0014:
3696                case 0x0015:
3697                        btv->c.type = BTTV_BOARD_OSPREY1x1;
3698                        break;
3699                case 0x0016:
3700                case 0x0017:
3701                case 0x0020:
3702                        btv->c.type = BTTV_BOARD_OSPREY1x1_SVID;
3703                        break;
3704                case 0x0018:
3705                case 0x0019:
3706                case 0x001E:
3707                case 0x001F:
3708                        btv->c.type = BTTV_BOARD_OSPREY2xx;
3709                        break;
3710                case 0x001A:
3711                case 0x001B:
3712                        btv->c.type = BTTV_BOARD_OSPREY2x0_SVID;
3713                        break;
3714                case 0x0040:
3715                        btv->c.type = BTTV_BOARD_OSPREY500;
3716                        break;
3717                case 0x0050:
3718                case 0x0056:
3719                        btv->c.type = BTTV_BOARD_OSPREY540;
3720                        /* bttv_osprey_540_init(btv); */
3721                        break;
3722                case 0x0060:
3723                case 0x0070:
3724                        btv->c.type = BTTV_BOARD_OSPREY2x0;
3725                        /* enable output on select control lines */
3726                        gpio_inout(0xffffff,0x000303);
3727                        break;
3728                default:
3729                        /* unknown...leave generic, but get serial # */
3730                        break;
3731                }
3732                serial =  (ee[offset+6] << 24)
3733                        | (ee[offset+7] << 16)
3734                        | (ee[offset+8] <<  8)
3735                        | (ee[offset+9]);
3736        }
3737
3738        printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3739               btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3740 }
3741
3742 /* ----------------------------------------------------------------------- */
3743 /* AVermedia specific stuff, from  bktr_card.c                             */
3744
3745 static int tuner_0_table[] = {
3746         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3747         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3748         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3749         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3750         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3751         TUNER_PHILIPS_FM1216ME_MK3 };
3752
3753 static int tuner_1_table[] = {
3754         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3755         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3756         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3757         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3758         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3759
3760 static void __devinit avermedia_eeprom(struct bttv *btv)
3761 {
3762         int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3763
3764         tuner_make      = (eeprom_data[0x41] & 0x7);
3765         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3766         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3767         btv->has_remote = (eeprom_data[0x42] & 0x01);
3768
3769         if (tuner_make == 0 || tuner_make == 2)
3770                 if(tuner_format <=0x0a)
3771                         tuner = tuner_0_table[tuner_format];
3772         if (tuner_make == 1)
3773                 if(tuner_format <=9)
3774                         tuner = tuner_1_table[tuner_format];
3775
3776         if (tuner_make == 4)
3777                 if(tuner_format == 0x09)
3778                         tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3779
3780         printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3781                 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3782         if(tuner) {
3783                 btv->tuner_type=tuner;
3784                 printk("%d",tuner);
3785         } else
3786                 printk("Unknown type");
3787         printk(" radio:%s remote control:%s\n",
3788                tuner_tv_fm     ? "yes" : "no",
3789                btv->has_remote ? "yes" : "no");
3790 }
3791
3792 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3793 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3794 {
3795         /* fix up our card entry */
3796         if(norm==VIDEO_MODE_NTSC) {
3797                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x957fff;
3798                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x957fff;
3799                 dprintk("bttv_tda9880_setnorm to NTSC\n");
3800         }
3801         else {
3802                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x947fff;
3803                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x947fff;
3804                 dprintk("bttv_tda9880_setnorm to PAL\n");
3805         }
3806         /* set GPIO according */
3807         gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3808                   bttv_tvcards[btv->c.type].audiomux[btv->audio]);
3809 }
3810
3811
3812 /*
3813  * reset/enable the MSP on some Hauppauge cards
3814  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3815  *
3816  * Hauppauge:  pin  5
3817  * Voodoo:     pin 20
3818  */
3819 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3820 {
3821         int mask = (1 << pin);
3822
3823         gpio_inout(mask,mask);
3824         gpio_bits(mask,0);
3825         udelay(2500);
3826         gpio_bits(mask,mask);
3827
3828         if (bttv_gpio)
3829                 bttv_gpio_tracking(btv,"msp34xx");
3830         if (bttv_verbose)
3831                 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3832                        "init [%d]\n", btv->c.nr, pin);
3833 }
3834
3835 static void __devinit boot_bt832(struct bttv *btv)
3836 {
3837 }
3838
3839 /* ----------------------------------------------------------------------- */
3840 /*  Imagenation L-Model PXC200 Framegrabber */
3841 /*  This is basically the same procedure as
3842  *  used by Alessandro Rubini in his pxc200
3843  *  driver, but using BTTV functions */
3844
3845 static void __devinit init_PXC200(struct bttv *btv)
3846 {
3847         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3848                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3849                                             0x00 };
3850         unsigned int i;
3851         int tmp;
3852         u32 val;
3853
3854         /* Initialise GPIO-connevted stuff */
3855         gpio_inout(0xffffff, (1<<13));
3856         gpio_write(0);
3857         udelay(3);
3858         gpio_write(1<<13);
3859         /* GPIO inputs are pulled up, so no need to drive
3860          * reset pin any longer */
3861         gpio_bits(0xffffff, 0);
3862         if (bttv_gpio)
3863                 bttv_gpio_tracking(btv,"pxc200");
3864
3865         /*  we could/should try and reset/control the AD pots? but
3866             right now  we simply  turned off the crushing.  Without
3867             this the AGC drifts drifts
3868             remember the EN is reverse logic -->
3869             setting BT848_ADC_AGC_EN disable the AGC
3870             tboult@eecs.lehigh.edu
3871         */
3872
3873         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3874
3875         /*      Initialise MAX517 DAC */
3876         printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3877         bttv_I2CWrite(btv,0x5E,0,0x80,1);
3878
3879         /*      Initialise 12C508 PIC */
3880         /*      The I2CWrite and I2CRead commmands are actually to the
3881          *      same chips - but the R/W bit is included in the address
3882          *      argument so the numbers are different */
3883
3884
3885         printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3886
3887         /* First of all, enable the clock line. This is used in the PXC200-F */
3888         val = btread(BT848_GPIO_DMA_CTL);
3889         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3890         btwrite(val, BT848_GPIO_DMA_CTL);
3891
3892         /* Then, push to 0 the reset pin long enough to reset the *
3893          * device same as above for the reset line, but not the same
3894          * value sent to the GPIO-connected stuff
3895          * which one is the good one? */
3896         gpio_inout(0xffffff,(1<<2));
3897         gpio_write(0);
3898         udelay(10);
3899         gpio_write(1<<2);
3900
3901         for (i = 0; i < ARRAY_SIZE(vals); i++) {
3902                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3903                 if (tmp != -1) {
3904                         printk(KERN_INFO
3905                                "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3906                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3907                 }
3908         }
3909
3910         printk(KERN_INFO "PXC200 Initialised.\n");
3911 }
3912
3913
3914
3915 /* ----------------------------------------------------------------------- */
3916 /*
3917  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3918  *  it. This apparently involves the following procedure for each 878 chip:
3919  *
3920  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
3921  *
3922  *  2)  write to GPIO_DATA
3923  *      - 0x0E
3924  *      - sleep 1ms
3925  *      - 0x10 + 0x0E
3926  *      - sleep 10ms
3927  *      - 0x0E
3928  *     read from GPIO_DATA into buf (uint_32)
3929  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3930  *                 error. ERROR_CPLD_Check_Failed stop.
3931  *
3932  *  3) write to GPIO_DATA
3933  *      - write 0x4400 + 0x0E
3934  *      - sleep 10ms
3935  *      - write 0x4410 + 0x0E
3936  *      - sleep 1ms
3937  *      - write 0x0E
3938  *     read from GPIO_DATA into buf (uint_32)
3939  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
3940  *                error. ERROR_CPLD_Check_Failed.
3941  */
3942 /* ----------------------------------------------------------------------- */
3943 static void
3944 init_RTV24 (struct bttv *btv)
3945 {
3946         uint32_t dataRead = 0;
3947         long watchdog_value = 0x0E;
3948
3949         printk (KERN_INFO
3950                 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
3951                 btv->c.nr);
3952
3953         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
3954
3955         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
3956         msleep (1);
3957         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
3958         msleep (10);
3959         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
3960
3961         dataRead = btread (BT848_GPIO_DATA);
3962
3963         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
3964                 printk (KERN_INFO
3965                         "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
3966                         btv->c.nr, dataRead);
3967         }
3968
3969         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
3970         msleep (10);
3971         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
3972         msleep (1);
3973         btwrite (watchdog_value, BT848_GPIO_DATA);
3974         msleep (1);
3975         dataRead = btread (BT848_GPIO_DATA);
3976
3977         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
3978                 printk (KERN_INFO
3979                         "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
3980                         btv->c.nr, dataRead);
3981
3982                 return;
3983         }
3984
3985         printk (KERN_INFO
3986                 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
3987 }
3988
3989
3990
3991 /* ----------------------------------------------------------------------- */
3992 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
3993 /*
3994  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3995  * This code is placed under the terms of the GNU General Public License
3996  *
3997  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3998  */
3999
4000 static void bus_low(struct bttv *btv, int bit)
4001 {
4002         if (btv->mbox_ior) {
4003                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4004                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4005                 udelay(5);
4006         }
4007
4008         gpio_bits(bit,0);
4009         udelay(5);
4010
4011         if (btv->mbox_ior) {
4012                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4013                 udelay(5);
4014         }
4015 }
4016
4017 static void bus_high(struct bttv *btv, int bit)
4018 {
4019         if (btv->mbox_ior) {
4020                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4021                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4022                 udelay(5);
4023         }
4024
4025         gpio_bits(bit,bit);
4026         udelay(5);
4027
4028         if (btv->mbox_ior) {
4029                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4030                 udelay(5);
4031         }
4032 }
4033
4034 static int bus_in(struct bttv *btv, int bit)
4035 {
4036         if (btv->mbox_ior) {
4037                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4038                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4039                 udelay(5);
4040
4041                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4042                 udelay(5);
4043         }
4044         return gpio_read() & (bit);
4045 }
4046
4047 /* TEA5757 register bits */
4048 #define TEA_FREQ                0:14
4049 #define TEA_BUFFER              15:15
4050
4051 #define TEA_SIGNAL_STRENGTH     16:17
4052
4053 #define TEA_PORT1               18:18
4054 #define TEA_PORT0               19:19
4055
4056 #define TEA_BAND                20:21
4057 #define TEA_BAND_FM             0
4058 #define TEA_BAND_MW             1
4059 #define TEA_BAND_LW             2
4060 #define TEA_BAND_SW             3
4061
4062 #define TEA_MONO                22:22
4063 #define TEA_ALLOW_STEREO        0
4064 #define TEA_FORCE_MONO          1
4065
4066 #define TEA_SEARCH_DIRECTION    23:23
4067 #define TEA_SEARCH_DOWN         0
4068 #define TEA_SEARCH_UP           1
4069
4070 #define TEA_STATUS              24:24
4071 #define TEA_STATUS_TUNED        0
4072 #define TEA_STATUS_SEARCHING    1
4073
4074 /* Low-level stuff */
4075 static int tea5757_read(struct bttv *btv)
4076 {
4077         unsigned long timeout;
4078         int value = 0;
4079         int i;
4080
4081         /* better safe than sorry */
4082         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4083
4084         if (btv->mbox_ior) {
4085                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4086                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4087                 udelay(5);
4088         }
4089
4090         if (bttv_gpio)
4091                 bttv_gpio_tracking(btv,"tea5757 read");
4092
4093         bus_low(btv,btv->mbox_we);
4094         bus_low(btv,btv->mbox_clk);
4095
4096         udelay(10);
4097         timeout= jiffies + HZ;
4098
4099         /* wait for DATA line to go low; error if it doesn't */
4100         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4101                 schedule();
4102         if (bus_in(btv,btv->mbox_data)) {
4103                 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4104                 return -1;
4105         }
4106
4107         dprintk("bttv%d: tea5757:",btv->c.nr);
4108         for(i = 0; i < 24; i++)
4109         {
4110                 udelay(5);
4111                 bus_high(btv,btv->mbox_clk);
4112                 udelay(5);
4113                 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4114                 bus_low(btv,btv->mbox_clk);
4115                 value <<= 1;
4116                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4117                 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4118         }
4119         dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4120         return value;
4121 }
4122
4123 static int tea5757_write(struct bttv *btv, int value)
4124 {
4125         int i;
4126         int reg = value;
4127
4128         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4129
4130         if (btv->mbox_ior) {
4131                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4132                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4133                 udelay(5);
4134         }
4135         if (bttv_gpio)
4136                 bttv_gpio_tracking(btv,"tea5757 write");
4137
4138         dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4139         bus_low(btv,btv->mbox_clk);
4140         bus_high(btv,btv->mbox_we);
4141         for(i = 0; i < 25; i++)
4142         {
4143                 if (reg & 0x1000000)
4144                         bus_high(btv,btv->mbox_data);
4145                 else
4146                         bus_low(btv,btv->mbox_data);
4147                 reg <<= 1;
4148                 bus_high(btv,btv->mbox_clk);
4149                 udelay(10);
4150                 bus_low(btv,btv->mbox_clk);
4151                 udelay(10);
4152         }
4153         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4154         return 0;
4155 }
4156
4157 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4158 {
4159         dprintk("tea5757_set_freq %d\n",freq);
4160         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4161 }
4162
4163
4164 /* ----------------------------------------------------------------------- */
4165 /* winview                                                                 */
4166
4167 static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
4168 {
4169         /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4170         int bits_out, loops, vol, data;
4171
4172         if (!set) {
4173                 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4174                 v->flags |= VIDEO_AUDIO_VOLUME;
4175                 return;
4176         }
4177
4178         /* 32 levels logarithmic */
4179         vol = 32 - ((v->volume>>11));
4180         /* units */
4181         bits_out = (PT2254_DBS_IN_2>>(vol%5));
4182         /* tens */
4183         bits_out |= (PT2254_DBS_IN_10>>(vol/5));
4184         bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
4185         data = gpio_read();
4186         data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
4187                   WINVIEW_PT2254_STROBE);
4188         for (loops = 17; loops >= 0 ; loops--) {
4189                 if (bits_out & (1<<loops))
4190                         data |=  WINVIEW_PT2254_DATA;
4191                 else
4192                         data &= ~WINVIEW_PT2254_DATA;
4193                 gpio_write(data);
4194                 udelay(5);
4195                 data |= WINVIEW_PT2254_CLK;
4196                 gpio_write(data);
4197                 udelay(5);
4198                 data &= ~WINVIEW_PT2254_CLK;
4199                 gpio_write(data);
4200         }
4201         data |=  WINVIEW_PT2254_STROBE;
4202         data &= ~WINVIEW_PT2254_DATA;
4203         gpio_write(data);
4204         udelay(10);
4205         data &= ~WINVIEW_PT2254_STROBE;
4206         gpio_write(data);
4207 }
4208
4209 /* ----------------------------------------------------------------------- */
4210 /* mono/stereo control for various cards (which don't use i2c chips but    */
4211 /* connect something to the GPIO pins                                      */
4212
4213 static void
4214 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
4215 {
4216         unsigned int con = 0;
4217
4218         if (set) {
4219                 gpio_inout(0x300, 0x300);
4220                 if (v->mode & VIDEO_SOUND_LANG1)
4221                         con = 0x000;
4222                 if (v->mode & VIDEO_SOUND_LANG2)
4223                         con = 0x300;
4224                 if (v->mode & VIDEO_SOUND_STEREO)
4225                         con = 0x200;
4226 /*              if (v->mode & VIDEO_SOUND_MONO)
4227  *                      con = 0x100; */
4228                 gpio_bits(0x300, con);
4229         } else {
4230                 v->mode = VIDEO_SOUND_STEREO |
4231                           VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
4232         }
4233 }
4234
4235 static void
4236 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
4237 {
4238         unsigned int val, con;
4239
4240         if (btv->radio_user)
4241                 return;
4242
4243         val = gpio_read();
4244         if (set) {
4245                 con = 0x000;
4246                 if (v->mode & VIDEO_SOUND_LANG2) {
4247                         if (v->mode & VIDEO_SOUND_LANG1) {
4248                                 /* LANG1 + LANG2 */
4249                                 con = 0x100;
4250                         }
4251                         else {
4252                                 /* LANG2 */
4253                                 con = 0x300;
4254                         }
4255                 }
4256                 if (con != (val & 0x300)) {
4257                         gpio_bits(0x300, con);
4258                         if (bttv_gpio)
4259                                 bttv_gpio_tracking(btv,"gvbctv5pci");
4260                 }
4261         } else {
4262                 switch (val & 0x70) {
4263                   case 0x10:
4264                         v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4265                         break;
4266                   case 0x30:
4267                         v->mode = VIDEO_SOUND_LANG2;
4268                         break;
4269                   case 0x50:
4270                         v->mode = VIDEO_SOUND_LANG1;
4271                         break;
4272                   case 0x60:
4273                         v->mode = VIDEO_SOUND_STEREO;
4274                         break;
4275                   case 0x70:
4276                         v->mode = VIDEO_SOUND_MONO;
4277                         break;
4278                   default:
4279                         v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4280                                   VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4281                 }
4282         }
4283 }
4284
4285 /*
4286  * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4287  *  I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4288  *  0xdde enables mono and 0xccd enables sap
4289  *
4290  * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4291  *  P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4292  *  input/output sound connection, so both must be set for output mode.
4293  *
4294  * Looks like it's needed only for the "tvphone", the "tvphone 98"
4295  * handles this with a tda9840
4296  *
4297  */
4298 static void
4299 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
4300 {
4301         int val = 0;
4302
4303         if (set) {
4304                 if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
4305                         val = 0x02;
4306                 if (v->mode & VIDEO_SOUND_STEREO)
4307                         val = 0x01;
4308                 if (val) {
4309                         gpio_bits(0x03,val);
4310                         if (bttv_gpio)
4311                                 bttv_gpio_tracking(btv,"avermedia");
4312                 }
4313         } else {
4314                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4315                         VIDEO_SOUND_LANG1;
4316                 return;
4317         }
4318 }
4319
4320 static void
4321 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
4322 {
4323         int val = 0;
4324
4325         if (set) {
4326                 if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
4327                         val = 0x01;
4328                 if (v->mode & VIDEO_SOUND_STEREO)  /* STEREO */
4329                         val = 0x02;
4330                 btaor(val, ~0x03, BT848_GPIO_DATA);
4331                 if (bttv_gpio)
4332                         bttv_gpio_tracking(btv,"avermedia");
4333         } else {
4334                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4335                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4336                 return;
4337         }
4338 }
4339
4340 /* Lifetec 9415 handling */
4341 static void
4342 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
4343 {
4344         int val = 0;
4345
4346         if (gpio_read() & 0x4000) {
4347                 v->mode = VIDEO_SOUND_MONO;
4348                 return;
4349         }
4350
4351         if (set) {
4352                 if (v->mode & VIDEO_SOUND_LANG2)  /* A2 SAP */
4353                         val = 0x0080;
4354                 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
4355                         val = 0x0880;
4356                 if ((v->mode & VIDEO_SOUND_LANG1) ||
4357                     (v->mode & VIDEO_SOUND_MONO))
4358                         val = 0;
4359                 gpio_bits(0x0880, val);
4360                 if (bttv_gpio)
4361                         bttv_gpio_tracking(btv,"lt9415");
4362         } else {
4363                 /* autodetect doesn't work with this card :-( */
4364                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4365                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4366                 return;
4367         }
4368 }
4369
4370 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4371 static void
4372 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
4373 {
4374         unsigned int con = 0;
4375
4376         if (set) {
4377                 gpio_inout(0x180000,0x180000);
4378                 if (v->mode & VIDEO_SOUND_LANG2)
4379                         con = 0x080000;
4380                 if (v->mode & VIDEO_SOUND_STEREO)
4381                         con = 0x180000;
4382                 gpio_bits(0x180000, con);
4383                 if (bttv_gpio)
4384                         bttv_gpio_tracking(btv,"terratv");
4385         } else {
4386                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4387                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4388         }
4389 }
4390
4391 static void
4392 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
4393 {
4394         unsigned long val = 0;
4395
4396         if (set) {
4397                 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4398                 if (v->mode & VIDEO_SOUND_MONO)         /* Mono */
4399                         val = 0x420000;
4400                 if (v->mode & VIDEO_SOUND_LANG1)        /* Mono */
4401                         val = 0x420000;
4402                 if (v->mode & VIDEO_SOUND_LANG2)        /* SAP */
4403                         val = 0x410000;
4404                 if (v->mode & VIDEO_SOUND_STEREO)       /* Stereo */
4405                         val = 0x020000;
4406                 if (val) {
4407                         gpio_bits(0x430000, val);
4408                         if (bttv_gpio)
4409                                 bttv_gpio_tracking(btv,"winfast2000");
4410                 }
4411         } else {
4412                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4413                           VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4414         }
4415 }
4416
4417 /*
4418  * Dariusz Kowalewski <darekk@automex.pl>
4419  * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4420  * revision 9B has on-board TDA9874A sound decoder).
4421  *
4422  * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4423  *       will mute this cards.
4424  */
4425 static void
4426 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
4427 {
4428         unsigned int val = 0;
4429
4430         if (btv->radio_user)
4431                 return;
4432
4433         if (set) {
4434                 if (v->mode & VIDEO_SOUND_MONO) {
4435                         val = 0x01;
4436                 }
4437                 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4438                     || (v->mode & VIDEO_SOUND_STEREO)) {
4439                         val = 0x02;
4440                 }
4441                 if (val) {
4442                         gpio_bits(0x03,val);
4443                         if (bttv_gpio)
4444                                 bttv_gpio_tracking(btv,"pvbt878p9b");
4445                 }
4446         } else {
4447                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4448                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4449         }
4450 }
4451
4452 /*
4453  * Dariusz Kowalewski <darekk@automex.pl>
4454  * sound control for FlyVideo 2000S (with tda9874 decoder)
4455  * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4456  */
4457 static void
4458 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
4459 {
4460         unsigned int val = 0xffff;
4461
4462         if (btv->radio_user)
4463                 return;
4464         if (set) {
4465                 if (v->mode & VIDEO_SOUND_MONO) {
4466                         val = 0x0000;
4467                 }
4468                 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4469                     || (v->mode & VIDEO_SOUND_STEREO)) {
4470                         val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4471                 }
4472                 if (val != 0xffff) {
4473                         gpio_bits(0x1800, val);
4474                         if (bttv_gpio)
4475                                 bttv_gpio_tracking(btv,"fv2000s");
4476                 }
4477         } else {
4478                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4479                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4480         }
4481 }
4482
4483 /*
4484  * sound control for Canopus WinDVR PCI
4485  * Masaki Suzuki <masaki@btree.org>
4486  */
4487 static void
4488 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4489 {
4490         unsigned long val = 0;
4491
4492         if (set) {
4493                 if (v->mode & VIDEO_SOUND_MONO)
4494                         val = 0x040000;
4495                 if (v->mode & VIDEO_SOUND_LANG1)
4496                         val = 0;
4497                 if (v->mode & VIDEO_SOUND_LANG2)
4498                         val = 0x100000;
4499                 if (v->mode & VIDEO_SOUND_STEREO)
4500                         val = 0;
4501                 if (val) {
4502                         gpio_bits(0x140000, val);
4503                         if (bttv_gpio)
4504                                 bttv_gpio_tracking(btv,"windvr");
4505                 }
4506         } else {
4507                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4508                           VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4509         }
4510 }
4511
4512 /*
4513  * sound control for AD-TVK503
4514  * Hiroshi Takekawa <sian@big.or.jp>
4515  */
4516 static void
4517 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4518 {
4519         unsigned int con = 0xffffff;
4520
4521         /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4522
4523         if (set) {
4524                 /* btor(***, BT848_GPIO_OUT_EN); */
4525                 if (v->mode & VIDEO_SOUND_LANG1)
4526                         con = 0x00000000;
4527                 if (v->mode & VIDEO_SOUND_LANG2)
4528                         con = 0x00180000;
4529                 if (v->mode & VIDEO_SOUND_STEREO)
4530                         con = 0x00000000;
4531                 if (v->mode & VIDEO_SOUND_MONO)
4532                         con = 0x00060000;
4533                 if (con != 0xffffff) {
4534                         gpio_bits(0x1e0000,con);
4535                         if (bttv_gpio)
4536                                 bttv_gpio_tracking(btv, "adtvk503");
4537                 }
4538         } else {
4539                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4540                           VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
4541         }
4542 }
4543
4544 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4545  *
4546  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4547  * switch instead (CD22M3494E). This IC can have multiple active connections
4548  * between Xn (input) and Yn (output) pins. We need to clear any existing
4549  * connection prior to establish a new one, pulsing the STROBE pin.
4550  *
4551  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4552  * GPIO pins are wired as:
4553  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4554  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4555  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroler)
4556  *  GPIO[8]   -                  - P3[5] (microcontroler)
4557  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroler)
4558  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroler)
4559  *  GPINTR    -                  - P3[4] (microcontroler)
4560  *
4561  * The microcontroler is a 80C32 like. It should be possible to change xpoint
4562  * configuration either directly (as we are doing) or using the microcontroler
4563  * which is also wired to I2C interface. I have no further info on the
4564  * microcontroler features, one would need to disassembly the firmware.
4565  * note: the vendor refused to give any information on this product, all
4566  *       that stuff was found using a multimeter! :)
4567  */
4568 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4569 {
4570         /* reset all conections */
4571         gpio_bits(0x200,0x200);
4572         mdelay(1);
4573         gpio_bits(0x200,0x000);
4574         mdelay(1);
4575
4576         /* create a new conection */
4577         gpio_bits(0x480,0x080);
4578         gpio_bits(0x480,0x480);
4579         mdelay(1);
4580         gpio_bits(0x480,0x080);
4581         mdelay(1);
4582 }
4583
4584 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4585  *
4586  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4587  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4588  * chips, ten eight input analog multiplexors, a not chip and a few
4589  * other components.
4590  *
4591  * 16 inputs on a secondary bracket are provided and can be selected
4592  * from each of the four capture chips.  Two of the eight input
4593  * multiplexors are used to select from any of the 16 input signals.
4594  *
4595  * Unsupported hardware capabilities:
4596  *  . A video output monitor on the secondary bracket can be selected from
4597  *    one of the 878A chips.
4598  *  . Another passthrough but I haven't spent any time investigating it.
4599  *  . Digital I/O (logic level connected to GPIO) is available from an
4600  *    onboard header.
4601  *
4602  * The on chip input mux should always be set to 2.
4603  * GPIO[16:19] - Video input selection
4604  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4605  * GPIO[?:?]   - Digital I/O.
4606  *
4607  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4608  * determined what function (if any) it provides.  With the microcontroller
4609  * and sync seperator chips a guess is that it might have to do with video
4610  * switching and maybe some digital I/O.
4611  */
4612 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4613 {
4614         /* video mux */
4615         gpio_bits(0x0f0000, input << 16);
4616 }
4617
4618 static void tibetCS16_init(struct bttv *btv)
4619 {
4620         /* enable gpio bits, mask obtained via btSpy */
4621         gpio_inout(0xffffff, 0x0f7fff);
4622         gpio_write(0x0f7fff);
4623 }
4624
4625 /*
4626  * The following routines for the Kodicom-4400r get a little mind-twisting.
4627  * There is a "master" controller and three "slave" controllers, together
4628  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4629  * The analog switch is controlled by the "master", but the detection order
4630  * of the four BT878A chips is in an order which I just don't understand.
4631  * The "master" is actually the second controller to be detected.  The
4632  * logic on the board uses logical numbers for the 4 controlers, but
4633  * those numbers are different from the detection sequence.  When working
4634  * with the analog switch, we need to "map" from the detection sequence
4635  * over to the board's logical controller number.  This mapping sequence
4636  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4637  * unit 3, the second (which is the master) is logical unit 0, etc.
4638  * We need to maintain the status of the analog switch (which of the 16
4639  * cameras is connected to which of the 4 controllers).  Rather than
4640  * add to the bttv structure for this, we use the data reserved for
4641  * the mbox (unused for this card type).
4642  */
4643
4644 /*
4645  * First a routine to set the analog switch, which controls which camera
4646  * is routed to which controller.  The switch comprises an X-address
4647  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4648  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4649  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4650  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4651  * specified address.  The idea is to set the address and data, then bring
4652  * STROBE high, and finally bring STROBE back to low.
4653  */
4654 static void kodicom4400r_write(struct bttv *btv,
4655                                unsigned char xaddr,
4656                                unsigned char yaddr,
4657                                unsigned char data) {
4658         unsigned int udata;
4659
4660         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4661         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4662         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4663         gpio_bits(0x1ff, udata);                /* strobe low */
4664 }
4665
4666 /*
4667  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4668  * use this routine.  The routine finds the "master" for the card, maps
4669  * the controller number from the detected position over to the logical
4670  * number, writes the appropriate data to the analog switch, and housekeeps
4671  * the local copy of the switch information.  The parameter 'input' is the
4672  * requested camera number (0 - 15).
4673  */
4674 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4675 {
4676         char *sw_status;
4677         int xaddr, yaddr;
4678         struct bttv *mctlr;
4679         static unsigned char map[4] = {3, 0, 2, 1};
4680
4681         mctlr = master[btv->c.nr];
4682         if (mctlr == NULL) {    /* ignore if master not yet detected */
4683                 return;
4684         }
4685         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4686         yaddr = map[yaddr];
4687         sw_status = (char *)(&mctlr->mbox_we);
4688         xaddr = input & 0xf;
4689         /* Check if the controller/camera pair has changed, else ignore */
4690         if (sw_status[yaddr] != xaddr)
4691         {
4692                 /* "open" the old switch, "close" the new one, save the new */
4693                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4694                 sw_status[yaddr] = xaddr;
4695                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4696         }
4697 }
4698
4699 /*
4700  * During initialisation, we need to reset the analog switch.  We
4701  * also preset the switch to map the 4 connectors on the card to the
4702  * *user's* (see above description of kodicom4400r_muxsel) channels
4703  * 0 through 3
4704  */
4705 static void kodicom4400r_init(struct bttv *btv)
4706 {
4707         char *sw_status = (char *)(&btv->mbox_we);
4708         int ix;
4709
4710         gpio_inout(0x0003ff, 0x0003ff);
4711         gpio_write(1 << 9);     /* reset MUX */
4712         gpio_write(0);
4713         /* Preset camera 0 to the 4 controllers */
4714         for (ix=0; ix<4; ix++) {
4715                 sw_status[ix] = ix;
4716                 kodicom4400r_write(btv, ix, ix, 1);
4717         }
4718         /*
4719          * Since this is the "master", we need to set up the
4720          * other three controller chips' pointers to this structure
4721          * for later use in the muxsel routine.
4722          */
4723         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4724             return;
4725         master[btv->c.nr-1] = btv;
4726         master[btv->c.nr]   = btv;
4727         master[btv->c.nr+1] = btv;
4728         master[btv->c.nr+2] = btv;
4729 }
4730
4731 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4732  * video multiplexers to provide up to 16 video inputs. These
4733  * multiplexers are controlled by the lower 8 GPIO pins of the
4734  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4735
4736  * xxx0 is pin xxx of multiplexer U5,
4737  * yyy1 is pin yyy of multiplexer U2
4738  */
4739 #define ENA0    0x01
4740 #define ENB0    0x02
4741 #define ENA1    0x04
4742 #define ENB1    0x08
4743
4744 #define IN10    0x10
4745 #define IN00    0x20
4746 #define IN11    0x40
4747 #define IN01    0x80
4748
4749 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4750 {
4751         static const int masks[] = {
4752                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4753                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4754                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4755                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4756         };
4757         gpio_write(masks[input%16]);
4758 }
4759 static void picolo_tetra_init(struct bttv *btv)
4760 {
4761         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4762         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4763         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4764 }
4765 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4766 {
4767
4768         dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel =>  input = %d\n",btv->c.nr,input);
4769         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4770         /*GPIO[20]&GPIO[21] used to choose the right input*/
4771         btwrite (input<<20,BT848_GPIO_DATA);
4772
4773 }
4774
4775 /*
4776  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4777  *
4778  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4779  * swichers to provide 16 channels to MUX0. The TDA8540's have
4780  * 4 indepedant outputs and as such the IVC120G also has the
4781  * optional "Monitor Out" bus. This allows the card to be looking
4782  * at one input while the monitor is looking at another.
4783  *
4784  * Since I've couldn't be bothered figuring out how to add an
4785  * independant muxsel for the monitor bus, I've just set it to
4786  * whatever the card is looking at.
4787  *
4788  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4789  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4790  *
4791  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4792  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4793  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4794  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4795  *
4796  */
4797
4798 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4799 #define I2C_TDA8540        0x90
4800 #define I2C_TDA8540_ALT1   0x92
4801 #define I2C_TDA8540_ALT2   0x94
4802 #define I2C_TDA8540_ALT3   0x96
4803 #define I2C_TDA8540_ALT4   0x98
4804 #define I2C_TDA8540_ALT5   0x9a
4805 #define I2C_TDA8540_ALT6   0x9c
4806
4807 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4808 {
4809         /* Simple maths */
4810         int key = input % 4;
4811         int matrix = input / 4;
4812
4813         dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4814                 btv->c.nr, input, matrix, key);
4815
4816         /* Handles the input selection on the TDA8540's */
4817         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4818                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4819         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4820                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4821         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4822                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4823         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4824                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4825
4826         /* Handles the output enables on the TDA8540's */
4827         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4828                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4829         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4830                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4831         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4832                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4833         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4834                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4835
4836         /* Selects MUX0 for input on the 878 */
4837         btaor((0)<<5, ~(3<<5), BT848_IFORM);
4838 }
4839
4840
4841 /* PXC200 muxsel helper
4842  * luke@syseng.anu.edu.au
4843  * another transplant
4844  * from Alessandro Rubini (rubini@linux.it)
4845  *
4846  * There are 4 kinds of cards:
4847  * PXC200L which is bt848
4848  * PXC200F which is bt848 with PIC controlling mux
4849  * PXC200AL which is bt878
4850  * PXC200AF which is bt878 with PIC controlling mux
4851  */
4852 #define PX_CFG_PXC200F 0x01
4853 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4854 #define PX_I2C_PIC       0x0f
4855 #define PX_PXC200A_CARDID 0x200a1295
4856 #define PX_I2C_CMD_CFG   0x00
4857
4858 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4859 {
4860         int rc;
4861         long mux;
4862         int bitmask;
4863         unsigned char buf[2];
4864
4865         /* Read PIC config to determine if this is a PXC200F */
4866         /* PX_I2C_CMD_CFG*/
4867         buf[0]=0;
4868         buf[1]=0;
4869         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4870         if (rc) {
4871           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4872           /* not PXC ? do nothing */
4873           return;
4874         }
4875
4876         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4877         if (!(rc & PX_CFG_PXC200F)) {
4878           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4879           return;
4880         }
4881
4882
4883         /* The multiplexer in the 200F is handled by the GPIO port */
4884         /* get correct mapping between inputs  */
4885         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4886         /* ** not needed!?   */
4887         mux = input;
4888
4889         /* make sure output pins are enabled */
4890         /* bitmask=0x30f; */
4891         bitmask=0x302;
4892         /* check whether we have a PXC200A */
4893         if (btv->cardid == PX_PXC200A_CARDID)  {
4894            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4895            bitmask |= 7<<4; /* the DAC */
4896         }
4897         btwrite(bitmask, BT848_GPIO_OUT_EN);
4898
4899         bitmask = btread(BT848_GPIO_DATA);
4900         if (btv->cardid == PX_PXC200A_CARDID)
4901           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4902         else /* older device */
4903           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4904         btwrite(bitmask,BT848_GPIO_DATA);
4905
4906         /*
4907          * Was "to be safe, set the bt848 to input 0"
4908          * Actually, since it's ok at load time, better not messing
4909          * with these bits (on PXC200AF you need to set mux 2 here)
4910          *
4911          * needed because bttv-driver sets mux before calling this function
4912          */
4913         if (btv->cardid == PX_PXC200A_CARDID)
4914           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4915         else /* older device */
4916           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4917
4918         printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4919 }
4920
4921 /* ----------------------------------------------------------------------- */
4922 /* motherboard chipset specific stuff                                      */
4923
4924 void __devinit bttv_check_chipset(void)
4925 {
4926         int pcipci_fail = 0;
4927         struct pci_dev *dev = NULL;
4928
4929         if (pci_pci_problems & PCIPCI_FAIL)
4930                 pcipci_fail = 1;
4931         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4932                 triton1 = 1;
4933         if (pci_pci_problems & PCIPCI_VSFX)
4934                 vsfx = 1;
4935 #ifdef PCIPCI_ALIMAGIK
4936         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4937                 latency = 0x0A;
4938 #endif
4939
4940
4941         /* print warnings about any quirks found */
4942         if (triton1)
4943                 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4944         if (vsfx)
4945                 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4946         if (pcipci_fail) {
4947                 printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
4948                 if (!no_overlay) {
4949                         printk(KERN_WARNING "bttv: overlay will be disabled.\n");
4950                         no_overlay = 1;
4951                 } else {
4952                         printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n");
4953                 }
4954         }
4955         if (UNSET != latency)
4956                 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4957         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4958                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4959                 unsigned char b;
4960                 pci_read_config_byte(dev, 0x53, &b);
4961                 if (bttv_debug)
4962                         printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4963                                "bufcon=0x%02x\n",b);
4964         }
4965 }
4966
4967 int __devinit bttv_handle_chipset(struct bttv *btv)
4968 {
4969         unsigned char command;
4970
4971         if (!triton1 && !vsfx && UNSET == latency)
4972                 return 0;
4973
4974         if (bttv_verbose) {
4975                 if (triton1)
4976                         printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4977                 if (vsfx && btv->id >= 878)
4978                         printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4979                 if (UNSET != latency)
4980                         printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4981                                btv->c.nr,latency);
4982         }
4983
4984         if (btv->id < 878) {
4985                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4986                 if (triton1)
4987                         btv->triton1 = BT848_INT_ETBF;
4988         } else {
4989                 /* bt878 has a bit in the pci config space for it */
4990                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4991                 if (triton1)
4992                         command |= BT878_EN_TBFX;
4993                 if (vsfx)
4994                         command |= BT878_EN_VSFX;
4995                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4996         }
4997         if (UNSET != latency)
4998                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4999         return 0;
5000 }
5001
5002
5003 /*
5004  * Local variables:
5005  * c-basic-offset: 8
5006  * End:
5007  */