2 * programming the msp34* sound processor family
4 * (c) 1997-2001 Gerd Knorr <kraxel@bytesex.org>
6 * what works and what doesn't:
9 * Support for Hauppauge cards added (decoding handled by tuner) added by
10 * Frederic Crozat <fcrozat@mail.dotcom.fr>
13 * should work. The stereo modes are backward compatible to FM-mono,
14 * therefore FM-Mono should be allways available.
16 * FM-Stereo (B/G, used in germany)
17 * should work, with autodetect
19 * FM-Stereo (satellite)
20 * should work, no autodetect (i.e. default is mono, but you can
21 * switch to stereo -- untested)
23 * NICAM (B/G, L , used in UK, Scandinavia, Spain and France)
24 * should work, with autodetect. Support for NICAM was added by
25 * Pekka Pietikainen <pp@netppl.fi>
29 * - better SAT support
32 * 980623 Thomas Sailer (sailer@ife.ee.ethz.ch)
33 * using soundcore instead of OSS
37 #include <linux/config.h>
38 #include <linux/module.h>
39 #include <linux/moduleparam.h>
40 #include <linux/kernel.h>
41 #include <linux/sched.h>
42 #include <linux/string.h>
43 #include <linux/timer.h>
44 #include <linux/delay.h>
45 #include <linux/errno.h>
46 #include <linux/slab.h>
47 #include <linux/i2c.h>
48 #include <linux/videodev.h>
49 #include <linux/init.h>
50 #include <linux/smp_lock.h>
51 #include <linux/kthread.h>
52 #include <linux/suspend.h>
53 #include <asm/semaphore.h>
54 #include <asm/pgtable.h>
56 #include <media/audiochip.h>
60 #define OPMODE_AUTO -1
61 #define OPMODE_MANUAL 0
62 #define OPMODE_SIMPLE 1 /* use short programming (>= msp3410 only) */
63 #define OPMODE_SIMPLER 2 /* use shorter programming (>= msp34xxG) */
65 /* insmod parameters */
66 static int opmode = OPMODE_AUTO;
67 static int debug = 0; /* debug output */
68 static int once = 0; /* no continous stereo monitoring */
69 static int amsound = 0; /* hard-wire AM sound at 6.5 Hz (france),
70 the autoscan seems work well only with FM... */
71 static int standard = 1; /* Override auto detect of audio standard, if needed. */
74 static int stereo_threshold = 0x190; /* a2 threshold for stereo/bilingual
75 (msp34xxg only) 0x00a0-0x03c0 */
85 int main, second; /* sound carrier */
87 int source; /* see msp34xxg_set_source */
98 struct task_struct *kthread;
104 #define HAVE_NICAM(msp) (((msp->rev2>>8) & 0xff) != 00)
105 #define HAVE_SIMPLE(msp) ((msp->rev1 & 0xff) >= 'D'-'@')
106 #define HAVE_SIMPLER(msp) ((msp->rev1 & 0xff) >= 'G'-'@')
107 #define HAVE_RADIO(msp) ((msp->rev1 & 0xff) >= 'G'-'@')
109 #define VIDEO_MODE_RADIO 16 /* norm magic for radio mode */
111 /* ---------------------------------------------------------------------- */
113 #define dprintk if (debug >= 1) printk
114 #define d2printk if (debug >= 2) printk
117 module_param(opmode, int, 0444);
120 module_param(once, int, 0644);
121 module_param(debug, int, 0644);
122 module_param(stereo_threshold, int, 0644);
123 module_param(standard, int, 0644);
124 module_param(amsound, int, 0644);
125 module_param(dolby, int, 0644);
127 MODULE_PARM_DESC(once, "No continuous stereo monitoring");
128 MODULE_PARM_DESC(debug, "Enable debug messages");
129 MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
130 MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
132 MODULE_DESCRIPTION("device driver for msp34xx TV sound processor");
133 MODULE_AUTHOR("Gerd Knorr");
134 MODULE_LICENSE("Dual BSD/GPL"); /* FreeBSD uses this too */
136 /* ---------------------------------------------------------------------- */
138 #define I2C_MSP3400C 0x80
139 #define I2C_MSP3400C_ALT 0x88
141 #define I2C_MSP3400C_DEM 0x10
142 #define I2C_MSP3400C_DFP 0x12
144 /* Addresses to scan */
145 static unsigned short normal_i2c[] = {
147 I2C_MSP3400C_ALT >> 1,
150 static unsigned short normal_i2c_range[] = {I2C_CLIENT_END,I2C_CLIENT_END};
153 /* ----------------------------------------------------------------------- */
154 /* functions for talking to the MSP3400C Sound processor */
156 static int msp3400c_reset(struct i2c_client *client)
158 /* reset and read revision code */
159 static char reset_off[3] = { 0x00, 0x80, 0x00 };
160 static char reset_on[3] = { 0x00, 0x00, 0x00 };
161 static char write[3] = { I2C_MSP3400C_DFP + 1, 0x00, 0x1e };
163 struct i2c_msg reset[2] = {
164 { client->addr, I2C_M_IGNORE_NAK, 3, reset_off },
165 { client->addr, I2C_M_IGNORE_NAK, 3, reset_on },
167 struct i2c_msg test[2] = {
168 { client->addr, 0, 3, write },
169 { client->addr, I2C_M_RD, 2, read },
172 if ( (1 != i2c_transfer(client->adapter,&reset[0],1)) ||
173 (1 != i2c_transfer(client->adapter,&reset[1],1)) ||
174 (2 != i2c_transfer(client->adapter,test,2)) ) {
175 printk(KERN_ERR "msp3400: chip reset failed\n");
182 msp3400c_read(struct i2c_client *client, int dev, int addr)
186 unsigned char write[3];
187 unsigned char read[2];
188 struct i2c_msg msgs[2] = {
189 { client->addr, 0, 3, write },
190 { client->addr, I2C_M_RD, 2, read }
193 write[1] = addr >> 8;
194 write[2] = addr & 0xff;
196 for (err = 0; err < 3;) {
197 if (2 == i2c_transfer(client->adapter,msgs,2))
200 printk(KERN_WARNING "msp34xx: I/O error #%d (read 0x%02x/0x%02x)\n",
205 printk(KERN_WARNING "msp34xx: giving up, reseting chip. Sound will go off, sorry folks :-|\n");
206 msp3400c_reset(client);
209 return read[0] << 8 | read[1];
213 msp3400c_write(struct i2c_client *client, int dev, int addr, int val)
216 unsigned char buffer[5];
219 buffer[1] = addr >> 8;
220 buffer[2] = addr & 0xff;
221 buffer[3] = val >> 8;
222 buffer[4] = val & 0xff;
224 for (err = 0; err < 3;) {
225 if (5 == i2c_master_send(client, buffer, 5))
228 printk(KERN_WARNING "msp34xx: I/O error #%d (write 0x%02x/0x%02x)\n",
233 printk(KERN_WARNING "msp34xx: giving up, reseting chip. Sound will go off, sorry folks :-|\n");
234 msp3400c_reset(client);
240 /* ------------------------------------------------------------------------ */
242 /* This macro is allowed for *constants* only, gcc must calculate it
243 at compile time. Remember -- no floats in kernel mode */
244 #define MSP_CARRIER(freq) ((int)((float)(freq/18.432)*(1<<24)))
246 #define MSP_MODE_AM_DETECT 0
247 #define MSP_MODE_FM_RADIO 2
248 #define MSP_MODE_FM_TERRA 3
249 #define MSP_MODE_FM_SAT 4
250 #define MSP_MODE_FM_NICAM1 5
251 #define MSP_MODE_FM_NICAM2 6
252 #define MSP_MODE_AM_NICAM 7
253 #define MSP_MODE_BTSC 8
254 #define MSP_MODE_EXTERN 9
256 static struct MSP_INIT_DATA_DEM {
265 } msp_init_data[] = {
266 /* AM (for carrier detect / msp3400) */
267 { { 75, 19, 36, 35, 39, 40 }, { 75, 19, 36, 35, 39, 40 },
268 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
269 0x00d0, 0x0500, 0x0020, 0x3000},
271 /* AM (for carrier detect / msp3410) */
272 { { -1, -1, -8, 2, 59, 126 }, { -1, -1, -8, 2, 59, 126 },
273 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
274 0x00d0, 0x0100, 0x0020, 0x3000},
277 { { -8, -8, 4, 6, 78, 107 }, { -8, -8, 4, 6, 78, 107 },
278 MSP_CARRIER(10.7), MSP_CARRIER(10.7),
279 0x00d0, 0x0480, 0x0020, 0x3000 },
281 /* Terrestial FM-mono + FM-stereo */
282 { { 3, 18, 27, 48, 66, 72 }, { 3, 18, 27, 48, 66, 72 },
283 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
284 0x00d0, 0x0480, 0x0030, 0x3000},
287 { { 1, 9, 14, 24, 33, 37 }, { 3, 18, 27, 48, 66, 72 },
288 MSP_CARRIER(6.5), MSP_CARRIER(6.5),
289 0x00c6, 0x0480, 0x0000, 0x3000},
291 /* NICAM/FM -- B/G (5.5/5.85), D/K (6.5/5.85) */
292 { { -2, -8, -10, 10, 50, 86 }, { 3, 18, 27, 48, 66, 72 },
293 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
294 0x00d0, 0x0040, 0x0120, 0x3000},
296 /* NICAM/FM -- I (6.0/6.552) */
297 { { 2, 4, -6, -4, 40, 94 }, { 3, 18, 27, 48, 66, 72 },
298 MSP_CARRIER(6.0), MSP_CARRIER(6.0),
299 0x00d0, 0x0040, 0x0120, 0x3000},
301 /* NICAM/AM -- L (6.5/5.85) */
302 { { -2, -8, -10, 10, 50, 86 }, { -4, -12, -9, 23, 79, 126 },
303 MSP_CARRIER(6.5), MSP_CARRIER(6.5),
304 0x00c6, 0x0140, 0x0120, 0x7c03},
307 struct CARRIER_DETECT {
312 static struct CARRIER_DETECT carrier_detect_main[] = {
314 { MSP_CARRIER(4.5), "4.5 NTSC" },
315 { MSP_CARRIER(5.5), "5.5 PAL B/G" },
316 { MSP_CARRIER(6.0), "6.0 PAL I" },
317 { MSP_CARRIER(6.5), "6.5 PAL D/K + SAT + SECAM" }
320 static struct CARRIER_DETECT carrier_detect_55[] = {
322 { MSP_CARRIER(5.7421875), "5.742 PAL B/G FM-stereo" },
323 { MSP_CARRIER(5.85), "5.85 PAL B/G NICAM" }
326 static struct CARRIER_DETECT carrier_detect_65[] = {
327 /* PAL SAT / SECAM */
328 { MSP_CARRIER(5.85), "5.85 PAL D/K + SECAM NICAM" },
329 { MSP_CARRIER(6.2578125), "6.25 PAL D/K1 FM-stereo" },
330 { MSP_CARRIER(6.7421875), "6.74 PAL D/K2 FM-stereo" },
331 { MSP_CARRIER(7.02), "7.02 PAL SAT FM-stereo s/b" },
332 { MSP_CARRIER(7.20), "7.20 PAL SAT FM-stereo s" },
333 { MSP_CARRIER(7.38), "7.38 PAL SAT FM-stereo b" },
336 #define CARRIER_COUNT(x) (sizeof(x)/sizeof(struct CARRIER_DETECT))
338 /* ----------------------------------------------------------------------- */
340 static int scarts[3][9] = {
341 /* MASK IN1 IN2 IN1_DA IN2_DA IN3 IN4 MONO MUTE */
342 { 0x0320, 0x0000, 0x0200, -1, -1, 0x0300, 0x0020, 0x0100, 0x0320 },
343 { 0x0c40, 0x0440, 0x0400, 0x0c00, 0x0040, 0x0000, 0x0840, 0x0800, 0x0c40 },
344 { 0x3080, 0x1000, 0x1080, 0x0000, 0x0080, 0x2080, 0x3080, 0x2000, 0x3000 },
347 static char *scart_names[] = {
348 "mask", "in1", "in2", "in1 da", "in2 da", "in3", "in4", "mono", "mute"
352 msp3400c_set_scart(struct i2c_client *client, int in, int out)
354 struct msp3400c *msp = i2c_get_clientdata(client);
356 if (-1 == scarts[out][in])
360 "msp34xx: scart switch: %s => %d\n",scart_names[in],out);
361 msp->acb &= ~scarts[out][SCART_MASK];
362 msp->acb |= scarts[out][in];
363 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0013, msp->acb);
366 /* ------------------------------------------------------------------------ */
368 static void msp3400c_setcarrier(struct i2c_client *client, int cdo1, int cdo2)
370 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0093, cdo1 & 0xfff);
371 msp3400c_write(client,I2C_MSP3400C_DEM, 0x009b, cdo1 >> 12);
372 msp3400c_write(client,I2C_MSP3400C_DEM, 0x00a3, cdo2 & 0xfff);
373 msp3400c_write(client,I2C_MSP3400C_DEM, 0x00ab, cdo2 >> 12);
374 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0056, 0); /*LOAD_REG_1/2*/
377 static void msp3400c_setvolume(struct i2c_client *client,
378 int muted, int volume, int balance)
380 int val = 0, bal = 0;
383 val = (volume * 0x7F / 65535) << 8;
386 bal = (balance / 256) - 128;
389 "msp34xx: setvolume: mute=%s %d:%d v=0x%02x b=0x%02x\n",
390 muted ? "on" : "off", volume, balance, val>>8, bal);
391 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0000, val); /* loudspeaker */
392 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0006, val); /* headphones */
393 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0007,
394 muted ? 0x01 : (val | 0x01));
395 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0001, bal << 8);
398 static void msp3400c_setbass(struct i2c_client *client, int bass)
400 int val = ((bass-32768) * 0x60 / 65535) << 8;
402 dprintk(KERN_DEBUG "msp34xx: setbass: %d 0x%02x\n",bass, val>>8);
403 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0002, val); /* loudspeaker */
406 static void msp3400c_settreble(struct i2c_client *client, int treble)
408 int val = ((treble-32768) * 0x60 / 65535) << 8;
410 dprintk(KERN_DEBUG "msp34xx: settreble: %d 0x%02x\n",treble, val>>8);
411 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0003, val); /* loudspeaker */
414 static void msp3400c_setmode(struct i2c_client *client, int type)
416 struct msp3400c *msp = i2c_get_clientdata(client);
419 dprintk(KERN_DEBUG "msp3400: setmode: %d\n",type);
421 msp->audmode = V4L2_TUNER_MODE_MONO;
422 msp->rxsubchans = V4L2_TUNER_SUB_MONO;
424 msp3400c_write(client,I2C_MSP3400C_DEM, 0x00bb, /* ad_cv */
425 msp_init_data[type].ad_cv);
427 for (i = 5; i >= 0; i--) /* fir 1 */
428 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0001,
429 msp_init_data[type].fir1[i]);
431 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005, 0x0004); /* fir 2 */
432 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005, 0x0040);
433 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005, 0x0000);
434 for (i = 5; i >= 0; i--)
435 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005,
436 msp_init_data[type].fir2[i]);
438 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0083, /* MODE_REG */
439 msp_init_data[type].mode_reg);
441 msp3400c_setcarrier(client, msp_init_data[type].cdo1,
442 msp_init_data[type].cdo2);
444 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0056, 0); /*LOAD_REG_1/2*/
447 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0008,
449 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0009,
451 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000b,
452 msp_init_data[type].dfp_src);
454 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0008,
455 msp_init_data[type].dfp_src);
456 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0009,
457 msp_init_data[type].dfp_src);
458 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000b,
459 msp_init_data[type].dfp_src);
461 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000a,
462 msp_init_data[type].dfp_src);
463 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000e,
464 msp_init_data[type].dfp_matrix);
466 if (HAVE_NICAM(msp)) {
468 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0010, 0x5a00); /* was: 0x3000 */
472 static int best_audio_mode(int rxsubchans)
474 if (rxsubchans & V4L2_TUNER_SUB_STEREO)
475 return V4L2_TUNER_MODE_STEREO;
476 if (rxsubchans & V4L2_TUNER_SUB_LANG1)
477 return V4L2_TUNER_MODE_LANG1;
478 if (rxsubchans & V4L2_TUNER_SUB_LANG2)
479 return V4L2_TUNER_MODE_LANG2;
480 return V4L2_TUNER_MODE_MONO;
483 /* turn on/off nicam + stereo */
484 static void msp3400c_set_audmode(struct i2c_client *client, int audmode)
486 static char *strmode[16] = {
488 [ 0 ... 15 ] = "invalid",
490 [ V4L2_TUNER_MODE_MONO ] = "mono",
491 [ V4L2_TUNER_MODE_STEREO ] = "stereo",
492 [ V4L2_TUNER_MODE_LANG1 ] = "lang1",
493 [ V4L2_TUNER_MODE_LANG2 ] = "lang2",
495 struct msp3400c *msp = i2c_get_clientdata(client);
496 int nicam=0; /* channel source: FM/AM or nicam */
499 BUG_ON(msp->opmode == OPMODE_SIMPLER);
500 msp->audmode = audmode;
502 /* switch demodulator */
504 case MSP_MODE_FM_TERRA:
505 dprintk(KERN_DEBUG "msp3400: FM setstereo: %s\n",
507 msp3400c_setcarrier(client,msp->second,msp->main);
509 case V4L2_TUNER_MODE_STEREO:
510 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000e, 0x3001);
512 case V4L2_TUNER_MODE_MONO:
513 case V4L2_TUNER_MODE_LANG1:
514 case V4L2_TUNER_MODE_LANG2:
515 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000e, 0x3000);
519 case MSP_MODE_FM_SAT:
520 dprintk(KERN_DEBUG "msp3400: SAT setstereo: %s\n",
523 case V4L2_TUNER_MODE_MONO:
524 msp3400c_setcarrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
526 case V4L2_TUNER_MODE_STEREO:
527 msp3400c_setcarrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02));
529 case V4L2_TUNER_MODE_LANG1:
530 msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
532 case V4L2_TUNER_MODE_LANG2:
533 msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
537 case MSP_MODE_FM_NICAM1:
538 case MSP_MODE_FM_NICAM2:
539 case MSP_MODE_AM_NICAM:
540 dprintk(KERN_DEBUG "msp3400: NICAM setstereo: %s\n",
542 msp3400c_setcarrier(client,msp->second,msp->main);
547 dprintk(KERN_DEBUG "msp3400: BTSC setstereo: %s\n",
551 case MSP_MODE_EXTERN:
552 dprintk(KERN_DEBUG "msp3400: extern setstereo: %s\n",
556 case MSP_MODE_FM_RADIO:
557 dprintk(KERN_DEBUG "msp3400: FM-Radio setstereo: %s\n",
561 dprintk(KERN_DEBUG "msp3400: mono setstereo\n");
567 case V4L2_TUNER_MODE_STEREO:
568 src = 0x0020 | nicam;
571 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0005,0x4000);
574 case V4L2_TUNER_MODE_MONO:
575 if (msp->mode == MSP_MODE_AM_NICAM) {
576 dprintk("msp3400: switching to AM mono\n");
577 /* AM mono decoding is handled by tuner, not MSP chip */
578 /* SCART switching control register */
579 msp3400c_set_scart(client,SCART_MONO,0);
583 case V4L2_TUNER_MODE_LANG1:
584 src = 0x0000 | nicam;
586 case V4L2_TUNER_MODE_LANG2:
587 src = 0x0010 | nicam;
591 "msp3400: setstereo final source/matrix = 0x%x\n", src);
594 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0008,0x0520);
595 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0009,0x0620);
596 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000a,src);
597 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000b,src);
599 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0008,src);
600 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0009,src);
601 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000a,src);
602 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000b,src);
607 msp3400c_print_mode(struct msp3400c *msp)
609 if (msp->main == msp->second) {
610 printk(KERN_DEBUG "msp3400: mono sound carrier: %d.%03d MHz\n",
611 msp->main/910000,(msp->main/910)%1000);
613 printk(KERN_DEBUG "msp3400: main sound carrier: %d.%03d MHz\n",
614 msp->main/910000,(msp->main/910)%1000);
616 if (msp->mode == MSP_MODE_FM_NICAM1 ||
617 msp->mode == MSP_MODE_FM_NICAM2)
618 printk(KERN_DEBUG "msp3400: NICAM/FM carrier : %d.%03d MHz\n",
619 msp->second/910000,(msp->second/910)%1000);
620 if (msp->mode == MSP_MODE_AM_NICAM)
621 printk(KERN_DEBUG "msp3400: NICAM/AM carrier : %d.%03d MHz\n",
622 msp->second/910000,(msp->second/910)%1000);
623 if (msp->mode == MSP_MODE_FM_TERRA &&
624 msp->main != msp->second) {
625 printk(KERN_DEBUG "msp3400: FM-stereo carrier : %d.%03d MHz\n",
626 msp->second/910000,(msp->second/910)%1000);
630 /* ----------------------------------------------------------------------- */
632 struct REGISTER_DUMP {
638 autodetect_stereo(struct i2c_client *client)
640 struct msp3400c *msp = i2c_get_clientdata(client);
642 int rxsubchans = msp->rxsubchans;
643 int newnicam = msp->nicam_on;
647 case MSP_MODE_FM_TERRA:
648 val = msp3400c_read(client, I2C_MSP3400C_DFP, 0x18);
652 "msp34xx: stereo detect register: %d\n",val);
654 rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
655 } else if (val < -4096) {
656 rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
658 rxsubchans = V4L2_TUNER_SUB_MONO;
662 case MSP_MODE_FM_NICAM1:
663 case MSP_MODE_FM_NICAM2:
664 case MSP_MODE_AM_NICAM:
665 val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x23);
667 "msp34xx: nicam sync=%d, mode=%d\n",
668 val & 1, (val & 0x1e) >> 1);
672 switch ((val & 0x1e) >> 1) {
675 rxsubchans = V4L2_TUNER_SUB_STEREO;
679 rxsubchans = V4L2_TUNER_SUB_MONO
680 | V4L2_TUNER_SUB_LANG1;
684 rxsubchans = V4L2_TUNER_SUB_MONO
685 | V4L2_TUNER_SUB_LANG1
686 | V4L2_TUNER_SUB_LANG2;
689 rxsubchans = V4L2_TUNER_SUB_MONO;
695 rxsubchans = V4L2_TUNER_SUB_MONO;
699 val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x200);
701 "msp3410: status=0x%x (pri=%s, sec=%s, %s%s%s)\n",
703 (val & 0x0002) ? "no" : "yes",
704 (val & 0x0004) ? "no" : "yes",
705 (val & 0x0040) ? "stereo" : "mono",
706 (val & 0x0080) ? ", nicam 2nd mono" : "",
707 (val & 0x0100) ? ", bilingual/SAP" : "");
708 rxsubchans = V4L2_TUNER_SUB_MONO;
709 if (val & 0x0040) rxsubchans |= V4L2_TUNER_SUB_STEREO;
710 if (val & 0x0100) rxsubchans |= V4L2_TUNER_SUB_LANG1;
713 if (rxsubchans != msp->rxsubchans) {
715 dprintk(KERN_DEBUG "msp34xx: watch: rxsubchans %d => %d\n",
716 msp->rxsubchans,rxsubchans);
717 msp->rxsubchans = rxsubchans;
719 if (newnicam != msp->nicam_on) {
721 dprintk(KERN_DEBUG "msp34xx: watch: nicam %d => %d\n",
722 msp->nicam_on,newnicam);
723 msp->nicam_on = newnicam;
729 * A kernel thread for msp3400 control -- we don't want to block the
730 * in the ioctl while doing the sound carrier & stereo detect
733 static int msp34xx_sleep(struct msp3400c *msp, int timeout)
735 DECLARE_WAITQUEUE(wait, current);
737 add_wait_queue(&msp->wq, &wait);
738 if (!kthread_should_stop()) {
740 set_current_state(TASK_INTERRUPTIBLE);
744 /* hmm, that one doesn't return on wakeup ... */
745 msleep_interruptible(timeout);
747 set_current_state(TASK_INTERRUPTIBLE);
748 schedule_timeout(msecs_to_jiffies(timeout));
752 if (current->flags & PF_FREEZE)
753 refrigerator(PF_FREEZE);
754 remove_wait_queue(&msp->wq, &wait);
758 /* stereo/multilang monitoring */
759 static void watch_stereo(struct i2c_client *client)
761 struct msp3400c *msp = i2c_get_clientdata(client);
763 if (autodetect_stereo(client))
764 msp3400c_set_audmode(client,best_audio_mode(msp->rxsubchans));
766 msp->watch_stereo = 0;
769 static int msp3400c_thread(void *data)
771 struct i2c_client *client = data;
772 struct msp3400c *msp = i2c_get_clientdata(client);
773 struct CARRIER_DETECT *cd;
774 int count, max1,max2,val1,val2, val,this;
776 printk("msp3400: kthread started\n");
778 d2printk("msp3400: thread: sleep\n");
779 msp34xx_sleep(msp,-1);
780 d2printk("msp3400: thread: wakeup\n");
783 dprintk("msp3410: thread: restart scan\n");
785 if (kthread_should_stop())
788 if (VIDEO_MODE_RADIO == msp->norm ||
789 MSP_MODE_EXTERN == msp->mode) {
790 /* no carrier scan, just unmute */
791 printk("msp3400: thread: no carrier scan\n");
792 msp3400c_setvolume(client, msp->muted,
793 msp->volume, msp->balance);
798 msp3400c_setvolume(client, msp->muted, 0, 0);
799 msp3400c_setmode(client, MSP_MODE_AM_DETECT /* +1 */ );
802 msp->watch_stereo = 0;
804 /* some time for the tuner to sync */
805 if (msp34xx_sleep(msp,200))
808 /* carrier detect pass #1 -- main carrier */
809 cd = carrier_detect_main; count = CARRIER_COUNT(carrier_detect_main);
811 if (amsound && (msp->norm == VIDEO_MODE_SECAM)) {
812 /* autodetect doesn't work well with AM ... */
815 dprintk("msp3400: AM sound override\n");
818 for (this = 0; this < count; this++) {
819 msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
820 if (msp34xx_sleep(msp,100))
822 val = msp3400c_read(client, I2C_MSP3400C_DFP, 0x1b);
826 val1 = val, max1 = this;
827 dprintk("msp3400: carrier1 val: %5d / %s\n", val,cd[this].name);
830 /* carrier detect pass #2 -- second (stereo) carrier */
833 cd = carrier_detect_55;
834 count = CARRIER_COUNT(carrier_detect_55);
837 cd = carrier_detect_65;
838 count = CARRIER_COUNT(carrier_detect_65);
843 cd = NULL; count = 0;
847 if (amsound && (msp->norm == VIDEO_MODE_SECAM)) {
848 /* autodetect doesn't work well with AM ... */
849 cd = NULL; count = 0; max2 = 0;
851 for (this = 0; this < count; this++) {
852 msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
853 if (msp34xx_sleep(msp,100))
855 val = msp3400c_read(client, I2C_MSP3400C_DFP, 0x1b);
859 val2 = val, max2 = this;
860 dprintk("msp3400: carrier2 val: %5d / %s\n", val,cd[this].name);
863 /* programm the msp3400 according to the results */
864 msp->main = carrier_detect_main[max1].cdo;
869 msp->second = carrier_detect_55[max2].cdo;
870 msp3400c_setmode(client, MSP_MODE_FM_TERRA);
872 msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
873 msp->watch_stereo = 1;
874 } else if (max2 == 1 && HAVE_NICAM(msp)) {
876 msp->second = carrier_detect_55[max2].cdo;
877 msp3400c_setmode(client, MSP_MODE_FM_NICAM1);
879 msp3400c_setcarrier(client, msp->second, msp->main);
880 msp->watch_stereo = 1;
887 msp->second = MSP_CARRIER(6.552);
888 msp3400c_setmode(client, MSP_MODE_FM_NICAM2);
890 msp3400c_setcarrier(client, msp->second, msp->main);
891 msp->watch_stereo = 1;
894 if (max2 == 1 || max2 == 2) {
896 msp->second = carrier_detect_65[max2].cdo;
897 msp3400c_setmode(client, MSP_MODE_FM_TERRA);
899 msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
900 msp->watch_stereo = 1;
901 } else if (max2 == 0 &&
902 msp->norm == VIDEO_MODE_SECAM) {
903 /* L NICAM or AM-mono */
904 msp->second = carrier_detect_65[max2].cdo;
905 msp3400c_setmode(client, MSP_MODE_AM_NICAM);
907 msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
908 msp3400c_setcarrier(client, msp->second, msp->main);
909 /* volume prescale for SCART (AM mono input) */
910 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000d, 0x1900);
911 msp->watch_stereo = 1;
912 } else if (max2 == 0 && HAVE_NICAM(msp)) {
914 msp->second = carrier_detect_65[max2].cdo;
915 msp3400c_setmode(client, MSP_MODE_FM_NICAM1);
917 msp3400c_setcarrier(client, msp->second, msp->main);
918 msp->watch_stereo = 1;
926 msp->second = carrier_detect_main[max1].cdo;
927 msp3400c_setmode(client, MSP_MODE_FM_TERRA);
929 msp3400c_setcarrier(client, msp->second, msp->main);
930 msp->rxsubchans = V4L2_TUNER_SUB_MONO;
931 msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
936 msp3400c_setvolume(client, msp->muted,
937 msp->volume, msp->balance);
939 msp3400c_print_mode(msp);
941 /* monitor tv audio mode */
942 while (msp->watch_stereo) {
943 if (msp34xx_sleep(msp,5000))
945 watch_stereo(client);
948 dprintk(KERN_DEBUG "msp3400: thread: exit\n");
952 /* ----------------------------------------------------------------------- */
953 /* this one uses the automatic sound standard detection of newer */
954 /* msp34xx chip versions */
956 static struct MODES {
961 { 0x0000, 0, 0, "ERROR" },
962 { 0x0001, 0, 0, "autodetect start" },
963 { 0x0002, MSP_CARRIER(4.5), MSP_CARRIER(4.72), "4.5/4.72 M Dual FM-Stereo" },
964 { 0x0003, MSP_CARRIER(5.5), MSP_CARRIER(5.7421875), "5.5/5.74 B/G Dual FM-Stereo" },
965 { 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), "6.5/6.25 D/K1 Dual FM-Stereo" },
966 { 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), "6.5/6.74 D/K2 Dual FM-Stereo" },
967 { 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 D/K FM-Mono (HDEV3)" },
968 { 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), "5.5/5.85 B/G NICAM FM" },
969 { 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 L NICAM AM" },
970 { 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), "6.0/6.55 I NICAM FM" },
971 { 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM" },
972 { 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV2)" },
973 { 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Stereo" },
974 { 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Mono + SAP" },
975 { 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M EIA-J Japan Stereo" },
976 { 0x0040, MSP_CARRIER(10.7), MSP_CARRIER(10.7), "10.7 FM-Stereo Radio" },
977 { 0x0050, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 SAT-Mono" },
978 { 0x0051, MSP_CARRIER(7.02), MSP_CARRIER(7.20), "7.02/7.20 SAT-Stereo" },
979 { 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2), "7.2 SAT ADR" },
980 { -1, 0, 0, NULL }, /* EOF */
983 static inline const char *msp34xx_standard_mode_name(int mode)
986 for (i = 0; modelist[i].name != NULL; i++)
987 if (modelist[i].retval == mode)
988 return modelist[i].name;
992 static int msp34xx_modus(int norm)
997 case VIDEO_MODE_NTSC: /* BTSC */
999 case VIDEO_MODE_SECAM:
1001 case VIDEO_MODE_RADIO:
1003 case VIDEO_MODE_AUTO:
1010 static int msp34xx_standard(int norm)
1013 case VIDEO_MODE_PAL:
1015 case VIDEO_MODE_NTSC: /* BTSC */
1017 case VIDEO_MODE_SECAM:
1019 case VIDEO_MODE_RADIO:
1026 static int msp3410d_thread(void *data)
1028 struct i2c_client *client = data;
1029 struct msp3400c *msp = i2c_get_clientdata(client);
1032 printk("msp3410: daemon started\n");
1034 d2printk(KERN_DEBUG "msp3410: thread: sleep\n");
1035 msp34xx_sleep(msp,-1);
1036 d2printk(KERN_DEBUG "msp3410: thread: wakeup\n");
1039 dprintk("msp3410: thread: restart scan\n");
1041 if (kthread_should_stop())
1044 if (msp->mode == MSP_MODE_EXTERN) {
1045 /* no carrier scan needed, just unmute */
1046 dprintk(KERN_DEBUG "msp3410: thread: no carrier scan\n");
1047 msp3400c_setvolume(client, msp->muted,
1048 msp->volume, msp->balance);
1052 /* put into sane state (and mute) */
1053 msp3400c_reset(client);
1055 /* some time for the tuner to sync */
1056 if (msp34xx_sleep(msp,200))
1059 /* start autodetect */
1060 mode = msp34xx_modus(msp->norm);
1061 std = msp34xx_standard(msp->norm);
1062 msp3400c_write(client, I2C_MSP3400C_DEM, 0x30, mode);
1063 msp3400c_write(client, I2C_MSP3400C_DEM, 0x20, std);
1064 msp->watch_stereo = 0;
1067 printk(KERN_DEBUG "msp3410: setting mode: %s (0x%04x)\n",
1068 msp34xx_standard_mode_name(std) ,std);
1071 /* programmed some specific mode */
1074 /* triggered autodetect */
1076 if (msp34xx_sleep(msp,100))
1080 val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x7e);
1083 dprintk(KERN_DEBUG "msp3410: detection still in progress\n");
1086 for (i = 0; modelist[i].name != NULL; i++)
1087 if (modelist[i].retval == val)
1089 dprintk(KERN_DEBUG "msp3410: current mode: %s (0x%04x)\n",
1090 modelist[i].name ? modelist[i].name : "unknown",
1092 msp->main = modelist[i].main;
1093 msp->second = modelist[i].second;
1095 if (amsound && (msp->norm == VIDEO_MODE_SECAM) && (val != 0x0009)) {
1096 /* autodetection has failed, let backup */
1097 dprintk(KERN_DEBUG "msp3410: autodetection failed,"
1098 " switching to backup mode: %s (0x%04x)\n",
1099 modelist[8].name ? modelist[8].name : "unknown",val);
1101 msp3400c_write(client, I2C_MSP3400C_DEM, 0x20, val);
1104 /* set various prescales */
1105 msp3400c_write(client, I2C_MSP3400C_DFP, 0x0d, 0x1900); /* scart */
1106 msp3400c_write(client, I2C_MSP3400C_DFP, 0x0e, 0x2403); /* FM */
1107 msp3400c_write(client, I2C_MSP3400C_DFP, 0x10, 0x5a00); /* nicam */
1111 case 0x0008: /* B/G NICAM */
1112 case 0x000a: /* I NICAM */
1114 msp->mode = MSP_MODE_FM_NICAM1;
1116 msp->mode = MSP_MODE_FM_NICAM2;
1117 /* just turn on stereo */
1118 msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
1120 msp->watch_stereo = 1;
1121 msp3400c_set_audmode(client,V4L2_TUNER_MODE_STEREO);
1124 msp->mode = MSP_MODE_AM_NICAM;
1125 msp->rxsubchans = V4L2_TUNER_SUB_MONO;
1127 msp3400c_set_audmode(client,V4L2_TUNER_MODE_MONO);
1128 msp->watch_stereo = 1;
1130 case 0x0020: /* BTSC */
1131 /* just turn on stereo */
1132 msp->mode = MSP_MODE_BTSC;
1133 msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
1135 msp->watch_stereo = 1;
1136 msp3400c_set_audmode(client,V4L2_TUNER_MODE_STEREO);
1138 case 0x0040: /* FM radio */
1139 msp->mode = MSP_MODE_FM_RADIO;
1140 msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
1141 msp->audmode = V4L2_TUNER_MODE_STEREO;
1143 msp->watch_stereo = 0;
1144 /* not needed in theory if HAVE_RADIO(), but
1145 short programming enables carrier mute */
1146 msp3400c_setmode(client,MSP_MODE_FM_RADIO);
1147 msp3400c_setcarrier(client, MSP_CARRIER(10.7),
1150 msp3400c_set_scart(client,SCART_IN2,0);
1152 /* radio from SCART_IN2 */
1153 msp3400c_write(client,I2C_MSP3400C_DFP, 0x08, 0x0220);
1154 msp3400c_write(client,I2C_MSP3400C_DFP, 0x09, 0x0220);
1155 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0b, 0x0220);
1157 /* msp34xx does radio decoding */
1158 msp3400c_write(client,I2C_MSP3400C_DFP, 0x08, 0x0020);
1159 msp3400c_write(client,I2C_MSP3400C_DFP, 0x09, 0x0020);
1160 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0b, 0x0020);
1166 msp->mode = MSP_MODE_FM_TERRA;
1167 msp->rxsubchans = V4L2_TUNER_SUB_MONO;
1168 msp->audmode = V4L2_TUNER_MODE_MONO;
1170 msp->watch_stereo = 1;
1174 /* unmute, restore misc registers */
1175 msp3400c_setbass(client, msp->bass);
1176 msp3400c_settreble(client, msp->treble);
1177 msp3400c_setvolume(client, msp->muted,
1178 msp->volume, msp->balance);
1179 msp3400c_write(client, I2C_MSP3400C_DFP, 0x0013, msp->acb);
1181 /* monitor tv audio mode */
1182 while (msp->watch_stereo) {
1183 if (msp34xx_sleep(msp,5000))
1185 watch_stereo(client);
1188 dprintk(KERN_DEBUG "msp3410: thread: exit\n");
1192 /* ----------------------------------------------------------------------- */
1193 /* msp34xxG + (simpler no-thread) */
1194 /* this one uses both automatic standard detection and automatic sound */
1195 /* select which are available in the newer G versions */
1196 /* struct msp: only norm, acb and source are really used in this mode */
1198 static void msp34xxg_set_source(struct i2c_client *client, int source);
1200 /* (re-)initialize the msp34xxg, according to the current norm in msp->norm
1201 * return 0 if it worked, -1 if it failed
1203 static int msp34xxg_init(struct i2c_client *client)
1205 struct msp3400c *msp = i2c_get_clientdata(client);
1208 if (msp3400c_reset(client))
1211 /* make sure that input/output is muted (paranoid mode) */
1212 if (msp3400c_write(client,
1215 0x0f20 /* mute DSP input, mute SCART 1 */))
1218 /* step-by-step initialisation, as described in the manual */
1219 modus = msp34xx_modus(msp->norm);
1220 std = msp34xx_standard(msp->norm);
1221 modus &= ~0x03; /* STATUS_CHANGE=0 */
1222 modus |= 0x01; /* AUTOMATIC_SOUND_DETECTION=1 */
1223 if (msp3400c_write(client,
1228 if (msp3400c_write(client,
1234 /* write the dfps that may have an influence on
1235 standard/audio autodetection right now */
1236 msp34xxg_set_source(client, msp->source);
1238 if (msp3400c_write(client, I2C_MSP3400C_DFP,
1239 0x0e, /* AM/FM Prescale */
1240 0x3000 /* default: [15:8] 75khz deviation */))
1243 if (msp3400c_write(client, I2C_MSP3400C_DFP,
1244 0x10, /* NICAM Prescale */
1245 0x5a00 /* default: 9db gain (as recommended) */))
1248 if (msp3400c_write(client,
1250 0x20, /* STANDARD SELECT */
1251 standard /* default: 0x01 for automatic standard select*/))
1256 static int msp34xxg_thread(void *data)
1258 struct i2c_client *client = data;
1259 struct msp3400c *msp = i2c_get_clientdata(client);
1262 printk("msp34xxg: daemon started\n");
1264 d2printk(KERN_DEBUG "msp34xxg: thread: sleep\n");
1265 msp34xx_sleep(msp,-1);
1266 d2printk(KERN_DEBUG "msp34xxg: thread: wakeup\n");
1269 dprintk("msp34xxg: thread: restart scan\n");
1271 if (kthread_should_stop())
1275 msp34xxg_init(client);
1280 /* watch autodetect */
1281 dprintk("msp34xxg: triggered autodetect, waiting for result\n");
1282 for (i = 0; i < 10; i++) {
1283 if (msp34xx_sleep(msp,100))
1287 val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x7e);
1292 dprintk("msp34xxg: detection still in progress\n");
1295 dprintk("msp34xxg: detection still in progress after 10 tries. giving up.\n");
1300 dprintk("msp34xxg: current mode: %s (0x%04x)\n",
1301 msp34xx_standard_mode_name(std), std);
1303 /* unmute: dispatch sound to scart output, set scart volume */
1304 dprintk("msp34xxg: unmute\n");
1306 msp3400c_setbass(client, msp->bass);
1307 msp3400c_settreble(client, msp->treble);
1308 msp3400c_setvolume(client, msp->muted, msp->volume, msp->balance);
1311 if (msp3400c_write(client,
1317 dprintk(KERN_DEBUG "msp34xxg: thread: exit\n");
1321 /* set the same 'source' for the loudspeaker, scart and quasi-peak detector
1322 * the value for source is the same as bit 15:8 of DFP registers 0x08,
1323 * 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B
1325 * this function replaces msp3400c_setstereo
1327 static void msp34xxg_set_source(struct i2c_client *client, int source)
1329 struct msp3400c *msp = i2c_get_clientdata(client);
1331 /* fix matrix mode to stereo and let the msp choose what
1332 * to output according to 'source', as recommended
1334 int value = (source&0x07)<<8|(source==0 ? 0x00:0x20);
1335 dprintk("msp34xxg: set source to %d (0x%x)\n", source, value);
1336 msp3400c_write(client,
1338 0x08, /* Loudspeaker Output */
1340 msp3400c_write(client,
1342 0x0a, /* SCART1 DA Output */
1344 msp3400c_write(client,
1346 0x0c, /* Quasi-peak detector */
1349 * set identification threshold. Personally, I
1350 * I set it to a higher value that the default
1351 * of 0x190 to ignore noisy stereo signals.
1352 * this needs tuning. (recommended range 0x00a0-0x03c0)
1353 * 0x7f0 = forced mono mode
1355 msp3400c_write(client,
1357 0x22, /* a2 threshold for stereo/bilingual */
1358 source==0 ? 0x7f0:stereo_threshold);
1362 static void msp34xxg_detect_stereo(struct i2c_client *client)
1364 struct msp3400c *msp = i2c_get_clientdata(client);
1366 int status = msp3400c_read(client,
1368 0x0200 /* STATUS */);
1369 int is_bilingual = status&0x100;
1370 int is_stereo = status&0x40;
1372 msp->rxsubchans = 0;
1374 msp->rxsubchans |= V4L2_TUNER_SUB_STEREO;
1376 msp->rxsubchans |= V4L2_TUNER_SUB_MONO;
1378 msp->rxsubchans |= V4L2_TUNER_SUB_LANG1|V4L2_TUNER_SUB_LANG2;
1379 /* I'm supposed to check whether it's SAP or not
1380 * and set only LANG2/SAP in this case. Yet, the MSP
1381 * does a lot of work to hide this and handle everything
1382 * the same way. I don't want to work around it so unless
1383 * this is a problem, I'll handle SAP just like lang1/lang2.
1386 dprintk("msp34xxg: status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
1387 status, is_stereo, is_bilingual, msp->rxsubchans);
1390 static void msp34xxg_set_audmode(struct i2c_client *client, int audmode)
1392 struct msp3400c *msp = i2c_get_clientdata(client);
1396 case V4L2_TUNER_MODE_MONO:
1397 source=0; /* mono only */
1399 case V4L2_TUNER_MODE_STEREO:
1400 source=1; /* stereo or A|B, see comment in msp34xxg_get_v4l2_stereo() */
1401 /* problem: that could also mean 2 (scart input) */
1403 case V4L2_TUNER_MODE_LANG1:
1404 source=3; /* stereo or A */
1406 case V4L2_TUNER_MODE_LANG2:
1407 source=4; /* stereo or B */
1409 default: /* doing nothing: a safe, sane default */
1413 msp->audmode = audmode;
1414 msp34xxg_set_source(client, source);
1418 /* ----------------------------------------------------------------------- */
1420 static int msp_attach(struct i2c_adapter *adap, int addr, int kind);
1421 static int msp_detach(struct i2c_client *client);
1422 static int msp_probe(struct i2c_adapter *adap);
1423 static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg);
1425 static int msp_suspend(struct device * dev, u32 state, u32 level);
1426 static int msp_resume(struct device * dev, u32 level);
1428 static void msp_wake_thread(struct i2c_client *client);
1430 static struct i2c_driver driver = {
1431 .owner = THIS_MODULE,
1432 .name = "i2c msp3400 driver",
1433 .id = I2C_DRIVERID_MSP3400,
1434 .flags = I2C_DF_NOTIFY,
1435 .attach_adapter = msp_probe,
1436 .detach_client = msp_detach,
1437 .command = msp_command,
1439 .suspend = msp_suspend,
1440 .resume = msp_resume,
1444 static struct i2c_client client_template =
1446 I2C_DEVNAME("(unset)"),
1447 .flags = I2C_CLIENT_ALLOW_USE,
1451 static int msp_attach(struct i2c_adapter *adap, int addr, int kind)
1453 struct msp3400c *msp;
1454 struct i2c_client *c;
1455 int (*thread_func)(void *data) = NULL;
1457 client_template.adapter = adap;
1458 client_template.addr = addr;
1460 if (-1 == msp3400c_reset(&client_template)) {
1461 dprintk("msp3400: no chip found\n");
1465 if (NULL == (c = kmalloc(sizeof(struct i2c_client),GFP_KERNEL)))
1467 memcpy(c,&client_template,sizeof(struct i2c_client));
1468 if (NULL == (msp = kmalloc(sizeof(struct msp3400c),GFP_KERNEL))) {
1473 memset(msp,0,sizeof(struct msp3400c));
1474 msp->volume = 58880; /* 0db gain */
1475 msp->balance = 32768;
1477 msp->treble = 32768;
1481 i2c_set_clientdata(c, msp);
1482 init_waitqueue_head(&msp->wq);
1484 if (-1 == msp3400c_reset(c)) {
1487 dprintk("msp3400: no chip found\n");
1491 msp->rev1 = msp3400c_read(c, I2C_MSP3400C_DFP, 0x1e);
1492 if (-1 != msp->rev1)
1493 msp->rev2 = msp3400c_read(c, I2C_MSP3400C_DFP, 0x1f);
1494 if ((-1 == msp->rev1) || (0 == msp->rev1 && 0 == msp->rev2)) {
1497 printk("msp3400: error while reading chip version\n");
1502 /* this will turn on a 1kHz beep - might be useful for debugging... */
1503 msp3400c_write(c,I2C_MSP3400C_DFP, 0x0014, 0x1040);
1505 msp3400c_setvolume(c, msp->muted, msp->volume, msp->balance);
1507 snprintf(c->name, sizeof(c->name), "MSP34%02d%c-%c%d",
1508 (msp->rev2>>8)&0xff, (msp->rev1&0xff)+'@',
1509 ((msp->rev1>>8)&0xff)+'@', msp->rev2&0x1f);
1511 msp->opmode = opmode;
1512 if (OPMODE_AUTO == msp->opmode) {
1513 #if 0 /* seems to work for ivtv only, disable by default for now ... */
1514 if (HAVE_SIMPLER(msp))
1515 msp->opmode = OPMODE_SIMPLER;
1518 if (HAVE_SIMPLE(msp))
1519 msp->opmode = OPMODE_SIMPLE;
1521 msp->opmode = OPMODE_MANUAL;
1524 /* hello world :-) */
1525 printk(KERN_INFO "msp34xx: init: chip=%s",i2c_clientname(c));
1526 if (HAVE_NICAM(msp))
1528 if (HAVE_SIMPLE(msp))
1530 if (HAVE_SIMPLER(msp))
1531 printk(" +simpler");
1532 if (HAVE_RADIO(msp))
1535 /* version-specific initialization */
1536 switch (msp->opmode) {
1538 printk(" mode=manual");
1539 thread_func = msp3400c_thread;
1542 printk(" mode=simple");
1543 thread_func = msp3410d_thread;
1545 case OPMODE_SIMPLER:
1546 printk(" mode=simpler");
1547 thread_func = msp34xxg_thread;
1552 /* startup control thread if needed */
1554 msp->kthread = kthread_run(thread_func, c, "msp34xx");
1555 if (NULL == msp->kthread)
1556 printk(KERN_WARNING "msp34xx: kernel_thread() failed\n");
1561 i2c_attach_client(c);
1565 static int msp_detach(struct i2c_client *client)
1567 struct msp3400c *msp = i2c_get_clientdata(client);
1569 /* shutdown control thread */
1570 if (msp->kthread >= 0) {
1572 kthread_stop(msp->kthread);
1574 msp3400c_reset(client);
1576 i2c_detach_client(client);
1582 static int msp_probe(struct i2c_adapter *adap)
1584 if (adap->class & I2C_CLASS_TV_ANALOG)
1585 return i2c_probe(adap, &addr_data, msp_attach);
1589 static void msp_wake_thread(struct i2c_client *client)
1591 struct msp3400c *msp = i2c_get_clientdata(client);
1593 if (NULL == msp->kthread)
1595 msp3400c_setvolume(client,msp->muted,0,0);
1596 msp->watch_stereo = 0;
1598 wake_up_interruptible(&msp->wq);
1601 /* ----------------------------------------------------------------------- */
1603 static int mode_v4l2_to_v4l1(int rxsubchans)
1607 if (rxsubchans & V4L2_TUNER_SUB_STEREO)
1608 mode |= VIDEO_SOUND_STEREO;
1609 if (rxsubchans & V4L2_TUNER_SUB_LANG2)
1610 mode |= VIDEO_SOUND_LANG2;
1611 if (rxsubchans & V4L2_TUNER_SUB_LANG1)
1612 mode |= VIDEO_SOUND_LANG1;
1614 mode |= VIDEO_SOUND_MONO;
1618 static int mode_v4l1_to_v4l2(int mode)
1620 if (mode & VIDEO_SOUND_STEREO)
1621 return V4L2_TUNER_MODE_STEREO;
1622 if (mode & VIDEO_SOUND_LANG2)
1623 return V4L2_TUNER_MODE_LANG2;
1624 if (mode & VIDEO_SOUND_LANG1)
1625 return V4L2_TUNER_MODE_LANG1;
1626 return V4L2_TUNER_MODE_MONO;
1629 static void msp_any_detect_stereo(struct i2c_client *client)
1631 struct msp3400c *msp = i2c_get_clientdata(client);
1633 switch (msp->opmode) {
1636 autodetect_stereo(client);
1638 case OPMODE_SIMPLER:
1639 msp34xxg_detect_stereo(client);
1644 static void msp_any_set_audmode(struct i2c_client *client, int audmode)
1646 struct msp3400c *msp = i2c_get_clientdata(client);
1648 switch (msp->opmode) {
1651 msp->watch_stereo = 0;
1652 msp3400c_set_audmode(client, audmode);
1654 case OPMODE_SIMPLER:
1655 msp34xxg_set_audmode(client, audmode);
1660 static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
1662 struct msp3400c *msp = i2c_get_clientdata(client);
1668 case AUDC_SET_INPUT:
1669 dprintk(KERN_DEBUG "msp34xx: AUDC_SET_INPUT(%d)\n",*sarg);
1670 if (*sarg == msp->input)
1675 /* Hauppauge uses IN2 for the radio */
1676 msp->mode = MSP_MODE_FM_RADIO;
1679 case AUDIO_EXTERN_1:
1680 /* IN1 is often used for external input ... */
1681 msp->mode = MSP_MODE_EXTERN;
1684 case AUDIO_EXTERN_2:
1685 /* ... sometimes it is IN2 through ;) */
1686 msp->mode = MSP_MODE_EXTERN;
1693 if (*sarg & AUDIO_MUTE)
1694 msp3400c_set_scart(client,SCART_MUTE,0);
1698 msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
1699 msp->audmode = V4L2_TUNER_MODE_STEREO;
1700 msp3400c_set_scart(client,scart,0);
1701 msp3400c_write(client,I2C_MSP3400C_DFP,0x000d,0x1900);
1702 if (msp->opmode != OPMODE_SIMPLER)
1703 msp3400c_set_audmode(client, msp->audmode);
1705 msp_wake_thread(client);
1708 case AUDC_SET_RADIO:
1709 dprintk(KERN_DEBUG "msp34xx: AUDC_SET_RADIO\n");
1710 msp->norm = VIDEO_MODE_RADIO;
1711 dprintk(KERN_DEBUG "msp34xx: switching to radio mode\n");
1712 msp->watch_stereo = 0;
1713 switch (msp->opmode) {
1715 /* set msp3400 to FM radio mode */
1716 msp3400c_setmode(client,MSP_MODE_FM_RADIO);
1717 msp3400c_setcarrier(client, MSP_CARRIER(10.7),
1719 msp3400c_setvolume(client, msp->muted,
1720 msp->volume, msp->balance);
1723 case OPMODE_SIMPLER:
1724 /* the thread will do for us */
1725 msp_wake_thread(client);
1730 /* --- v4l ioctls --- */
1731 /* take care: bttv does userspace copying, we'll get a
1732 kernel pointer here... */
1735 struct video_audio *va = arg;
1737 dprintk(KERN_DEBUG "msp34xx: VIDIOCGAUDIO\n");
1738 va->flags |= VIDEO_AUDIO_VOLUME |
1740 VIDEO_AUDIO_TREBLE |
1741 VIDEO_AUDIO_MUTABLE;
1743 va->flags |= VIDEO_AUDIO_MUTE;
1745 va->volume = msp->volume;
1746 va->balance = (va->volume) ? msp->balance : 32768;
1747 va->bass = msp->bass;
1748 va->treble = msp->treble;
1750 msp_any_detect_stereo(client);
1751 va->mode = mode_v4l2_to_v4l1(msp->rxsubchans);
1756 struct video_audio *va = arg;
1758 dprintk(KERN_DEBUG "msp34xx: VIDIOCSAUDIO\n");
1759 msp->muted = (va->flags & VIDEO_AUDIO_MUTE);
1760 msp->volume = va->volume;
1761 msp->balance = va->balance;
1762 msp->bass = va->bass;
1763 msp->treble = va->treble;
1765 msp3400c_setvolume(client, msp->muted,
1766 msp->volume, msp->balance);
1767 msp3400c_setbass(client,msp->bass);
1768 msp3400c_settreble(client,msp->treble);
1770 if (va->mode != 0 && msp->norm != VIDEO_MODE_RADIO)
1771 msp_any_set_audmode(client,mode_v4l1_to_v4l2(va->mode));
1776 struct video_channel *vc = arg;
1778 dprintk(KERN_DEBUG "msp34xx: VIDIOCSCHAN (norm=%d)\n",vc->norm);
1779 msp->norm = vc->norm;
1780 msp_wake_thread(client);
1785 case VIDIOC_S_FREQUENCY:
1787 /* new channel -- kick audio carrier scan */
1788 dprintk(KERN_DEBUG "msp34xx: VIDIOCSFREQ\n");
1789 msp_wake_thread(client);
1793 /* --- v4l2 ioctls --- */
1794 case VIDIOC_G_TUNER:
1796 struct v4l2_tuner *vt = arg;
1798 msp_any_detect_stereo(client);
1799 vt->audmode = msp->audmode;
1800 vt->rxsubchans = msp->rxsubchans;
1801 vt->capability = V4L2_TUNER_CAP_STEREO |
1802 V4L2_TUNER_CAP_LANG1|
1803 V4L2_TUNER_CAP_LANG2;
1806 case VIDIOC_S_TUNER:
1808 struct v4l2_tuner *vt=(struct v4l2_tuner *)arg;
1810 /* only set audmode */
1811 if (vt->audmode != -1 && vt->audmode != 0)
1812 msp_any_set_audmode(client, vt->audmode);
1816 /* msp34xx specific */
1817 case MSP_SET_MATRIX:
1819 struct msp_matrix *mspm = arg;
1821 dprintk(KERN_DEBUG "msp34xx: MSP_SET_MATRIX\n");
1822 msp3400c_set_scart(client, mspm->input, mspm->output);
1833 static int msp_suspend(struct device * dev, u32 state, u32 level)
1835 struct i2c_client *c = container_of(dev, struct i2c_client, dev);
1837 dprintk("msp34xx: suspend\n");
1842 static int msp_resume(struct device * dev, u32 level)
1844 struct i2c_client *c = container_of(dev, struct i2c_client, dev);
1846 dprintk("msp34xx: resume\n");
1851 /* ----------------------------------------------------------------------- */
1853 static int __init msp3400_init_module(void)
1855 return i2c_add_driver(&driver);
1858 static void __exit msp3400_cleanup_module(void)
1860 i2c_del_driver(&driver);
1863 module_init(msp3400_init_module);
1864 module_exit(msp3400_cleanup_module);
1867 * Overrides for Emacs so that we follow Linus's tabbing style.
1868 * ---------------------------------------------------------------------------