2 * (C) Copyright Linus Torvalds 1999
3 * (C) Copyright Johannes Erdfelt 1999-2001
4 * (C) Copyright Andreas Gal 1999
5 * (C) Copyright Gregory P. Smith 1999
6 * (C) Copyright Deti Fliegl 1999
7 * (C) Copyright Randy Dunlap 2000
8 * (C) Copyright David Brownell 2000-2002
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
17 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software Foundation,
22 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/config.h>
27 #ifdef CONFIG_USB_DEBUG
31 #include <linux/module.h>
32 #include <linux/version.h>
33 #include <linux/kernel.h>
34 #include <linux/slab.h>
35 #include <linux/completion.h>
36 #include <linux/uts.h> /* for UTS_SYSNAME */
39 #include <asm/scatterlist.h>
40 #include <linux/device.h>
41 #include <linux/dma-mapping.h>
42 #include <asm/byteorder.h>
44 #include <linux/usb.h>
50 // #define USB_BANDWIDTH_MESSAGES
52 /*-------------------------------------------------------------------------*/
55 * USB Host Controller Driver framework
57 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
58 * HCD-specific behaviors/bugs.
60 * This does error checks, tracks devices and urbs, and delegates to a
61 * "hc_driver" only for code (and data) that really needs to know about
62 * hardware differences. That includes root hub registers, i/o queues,
63 * and so on ... but as little else as possible.
65 * Shared code includes most of the "root hub" code (these are emulated,
66 * though each HC's hardware works differently) and PCI glue, plus request
67 * tracking overhead. The HCD code should only block on spinlocks or on
68 * hardware handshaking; blocking on software events (such as other kernel
69 * threads releasing resources, or completing actions) is all generic.
71 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
72 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
73 * only by the hub driver ... and that neither should be seen or used by
74 * usb client device drivers.
76 * Contributors of ideas or unattributed patches include: David Brownell,
77 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
80 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
81 * associated cleanup. "usb_hcd" still != "usb_bus".
82 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
85 /*-------------------------------------------------------------------------*/
87 /* host controllers we manage */
88 LIST_HEAD (usb_bus_list);
89 EXPORT_SYMBOL_GPL (usb_bus_list);
91 /* used when allocating bus numbers */
94 unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))];
96 static struct usb_busmap busmap;
98 /* used when updating list of hcds */
99 DECLARE_MUTEX (usb_bus_list_lock); /* exported only for usbfs */
100 EXPORT_SYMBOL_GPL (usb_bus_list_lock);
102 /* used when updating hcd data */
103 static spinlock_t hcd_data_lock = SPIN_LOCK_UNLOCKED;
105 /* wait queue for synchronous unlinks */
106 DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
108 /*-------------------------------------------------------------------------*/
111 * Sharable chunks of root hub code.
114 /*-------------------------------------------------------------------------*/
116 #define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff)
117 #define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff)
119 /* usb 2.0 root hub device descriptor */
120 static const u8 usb2_rh_dev_descriptor [18] = {
121 0x12, /* __u8 bLength; */
122 0x01, /* __u8 bDescriptorType; Device */
123 0x00, 0x02, /* __u16 bcdUSB; v2.0 */
125 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
126 0x00, /* __u8 bDeviceSubClass; */
127 0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
128 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
130 0x00, 0x00, /* __u16 idVendor; */
131 0x00, 0x00, /* __u16 idProduct; */
132 KERNEL_VER, KERNEL_REL, /* __u16 bcdDevice */
134 0x03, /* __u8 iManufacturer; */
135 0x02, /* __u8 iProduct; */
136 0x01, /* __u8 iSerialNumber; */
137 0x01 /* __u8 bNumConfigurations; */
140 /* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
142 /* usb 1.1 root hub device descriptor */
143 static const u8 usb11_rh_dev_descriptor [18] = {
144 0x12, /* __u8 bLength; */
145 0x01, /* __u8 bDescriptorType; Device */
146 0x10, 0x01, /* __u16 bcdUSB; v1.1 */
148 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
149 0x00, /* __u8 bDeviceSubClass; */
150 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
151 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
153 0x00, 0x00, /* __u16 idVendor; */
154 0x00, 0x00, /* __u16 idProduct; */
155 KERNEL_VER, KERNEL_REL, /* __u16 bcdDevice */
157 0x03, /* __u8 iManufacturer; */
158 0x02, /* __u8 iProduct; */
159 0x01, /* __u8 iSerialNumber; */
160 0x01 /* __u8 bNumConfigurations; */
164 /*-------------------------------------------------------------------------*/
166 /* Configuration descriptors for our root hubs */
168 static const u8 fs_rh_config_descriptor [] = {
170 /* one configuration */
171 0x09, /* __u8 bLength; */
172 0x02, /* __u8 bDescriptorType; Configuration */
173 0x19, 0x00, /* __u16 wTotalLength; */
174 0x01, /* __u8 bNumInterfaces; (1) */
175 0x01, /* __u8 bConfigurationValue; */
176 0x00, /* __u8 iConfiguration; */
177 0xc0, /* __u8 bmAttributes;
182 0x00, /* __u8 MaxPower; */
185 * USB 2.0, single TT organization (mandatory):
186 * one interface, protocol 0
188 * USB 2.0, multiple TT organization (optional):
189 * two interfaces, protocols 1 (like single TT)
190 * and 2 (multiple TT mode) ... config is
196 0x09, /* __u8 if_bLength; */
197 0x04, /* __u8 if_bDescriptorType; Interface */
198 0x00, /* __u8 if_bInterfaceNumber; */
199 0x00, /* __u8 if_bAlternateSetting; */
200 0x01, /* __u8 if_bNumEndpoints; */
201 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
202 0x00, /* __u8 if_bInterfaceSubClass; */
203 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
204 0x00, /* __u8 if_iInterface; */
206 /* one endpoint (status change endpoint) */
207 0x07, /* __u8 ep_bLength; */
208 0x05, /* __u8 ep_bDescriptorType; Endpoint */
209 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
210 0x03, /* __u8 ep_bmAttributes; Interrupt */
211 0x02, 0x00, /* __u16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
212 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
215 static const u8 hs_rh_config_descriptor [] = {
217 /* one configuration */
218 0x09, /* __u8 bLength; */
219 0x02, /* __u8 bDescriptorType; Configuration */
220 0x19, 0x00, /* __u16 wTotalLength; */
221 0x01, /* __u8 bNumInterfaces; (1) */
222 0x01, /* __u8 bConfigurationValue; */
223 0x00, /* __u8 iConfiguration; */
224 0xc0, /* __u8 bmAttributes;
229 0x00, /* __u8 MaxPower; */
232 * USB 2.0, single TT organization (mandatory):
233 * one interface, protocol 0
235 * USB 2.0, multiple TT organization (optional):
236 * two interfaces, protocols 1 (like single TT)
237 * and 2 (multiple TT mode) ... config is
243 0x09, /* __u8 if_bLength; */
244 0x04, /* __u8 if_bDescriptorType; Interface */
245 0x00, /* __u8 if_bInterfaceNumber; */
246 0x00, /* __u8 if_bAlternateSetting; */
247 0x01, /* __u8 if_bNumEndpoints; */
248 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
249 0x00, /* __u8 if_bInterfaceSubClass; */
250 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
251 0x00, /* __u8 if_iInterface; */
253 /* one endpoint (status change endpoint) */
254 0x07, /* __u8 ep_bLength; */
255 0x05, /* __u8 ep_bDescriptorType; Endpoint */
256 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
257 0x03, /* __u8 ep_bmAttributes; Interrupt */
258 0x02, 0x00, /* __u16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
259 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
262 /*-------------------------------------------------------------------------*/
265 * helper routine for returning string descriptors in UTF-16LE
266 * input can actually be ISO-8859-1; ASCII is its 7-bit subset
268 static int ascii2utf (char *s, u8 *utf, int utfmax)
272 for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
280 * rh_string - provides manufacturer, product and serial strings for root hub
281 * @id: the string ID number (1: serial number, 2: product, 3: vendor)
282 * @hcd: the host controller for this root hub
283 * @type: string describing our driver
284 * @data: return packet in UTF-16 LE
285 * @len: length of the return packet
287 * Produces either a manufacturer, product or serial number string for the
288 * virtual root hub device.
290 static int rh_string (
300 *data++ = 4; *data++ = 3; /* 4 bytes string data */
301 *data++ = 0x09; *data++ = 0x04; /* MSFT-speak for "en-us" */
305 } else if (id == 1) {
306 strcpy (buf, hcd->self.bus_name);
308 // product description
309 } else if (id == 2) {
310 strcpy (buf, hcd->product_desc);
312 // id 3 == vendor description
313 } else if (id == 3) {
314 sprintf (buf, "%s %s %s", UTS_SYSNAME, UTS_RELEASE,
317 // unsupported IDs --> "protocol stall"
321 data [0] = 2 * (strlen (buf) + 1);
322 data [1] = 3; /* type == string */
323 return 2 + ascii2utf (buf, data + 2, len - 2);
327 /* Root hub control transfers execute synchronously */
328 static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
330 struct usb_ctrlrequest *cmd;
331 u16 typeReq, wValue, wIndex, wLength;
332 const u8 *bufp = NULL;
333 u8 *ubuf = urb->transfer_buffer;
335 int patch_wakeup = 0;
338 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
339 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
340 wValue = le16_to_cpu (cmd->wValue);
341 wIndex = le16_to_cpu (cmd->wIndex);
342 wLength = le16_to_cpu (cmd->wLength);
344 if (wLength > urb->transfer_buffer_length)
347 /* set up for success */
349 urb->actual_length = wLength;
352 /* DEVICE REQUESTS */
354 case DeviceRequest | USB_REQ_GET_STATUS:
355 ubuf [0] = (hcd->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP)
356 | (1 << USB_DEVICE_SELF_POWERED);
359 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
360 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
361 hcd->remote_wakeup = 0;
365 case DeviceOutRequest | USB_REQ_SET_FEATURE:
366 if (hcd->can_wakeup && wValue == USB_DEVICE_REMOTE_WAKEUP)
367 hcd->remote_wakeup = 1;
371 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
374 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
376 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
377 switch (wValue & 0xff00) {
378 case USB_DT_DEVICE << 8:
379 if (hcd->driver->flags & HCD_USB2)
380 bufp = usb2_rh_dev_descriptor;
381 else if (hcd->driver->flags & HCD_USB11)
382 bufp = usb11_rh_dev_descriptor;
387 case USB_DT_CONFIG << 8:
388 if (hcd->driver->flags & HCD_USB2) {
389 bufp = hs_rh_config_descriptor;
390 len = sizeof hs_rh_config_descriptor;
392 bufp = fs_rh_config_descriptor;
393 len = sizeof fs_rh_config_descriptor;
398 case USB_DT_STRING << 8:
399 urb->actual_length = rh_string (
407 case DeviceRequest | USB_REQ_GET_INTERFACE:
410 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
412 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
413 // wValue == urb->dev->devaddr
414 dev_dbg (hcd->self.controller, "root hub device address %d\n",
418 /* INTERFACE REQUESTS (no defined feature/status flags) */
420 /* ENDPOINT REQUESTS */
422 case EndpointRequest | USB_REQ_GET_STATUS:
423 // ENDPOINT_HALT flag
427 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
428 case EndpointOutRequest | USB_REQ_SET_FEATURE:
429 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
432 /* CLASS REQUESTS (and errors) */
435 /* non-generic request */
436 if (HCD_IS_SUSPENDED (hcd->state))
437 urb->status = -EAGAIN;
439 urb->status = hcd->driver->hub_control (hcd,
440 typeReq, wValue, wIndex,
444 /* "protocol stall" on error */
445 urb->status = -EPIPE;
448 urb->actual_length = 0;
449 if (urb->status != -EPIPE) {
450 dev_dbg (hcd->self.controller,
451 "CTRL: TypeReq=0x%x val=0x%x "
452 "idx=0x%x len=%d ==> %d\n",
453 typeReq, wValue, wIndex,
454 wLength, urb->status);
458 if (urb->transfer_buffer_length < len)
459 len = urb->transfer_buffer_length;
460 urb->actual_length = len;
461 // always USB_DIR_IN, toward host
462 memcpy (ubuf, bufp, len);
464 /* report whether RH hardware supports remote wakeup */
466 ((struct usb_config_descriptor *)ubuf)->bmAttributes
467 |= USB_CONFIG_ATT_WAKEUP;
470 /* any errors get returned through the urb completion */
471 local_irq_save (flags);
472 usb_hcd_giveback_urb (hcd, urb, NULL);
473 local_irq_restore (flags);
477 /*-------------------------------------------------------------------------*/
480 * Root Hub interrupt transfers are synthesized with a timer.
481 * Completions are called in_interrupt() but not in_irq().
483 * Note: some root hubs (including common UHCI based designs) can't
484 * correctly issue port change IRQs. They're the ones that _need_ a
485 * timer; most other root hubs don't. Some systems could save a
486 * lot of battery power by eliminating these root hub timer IRQs.
489 static void rh_report_status (unsigned long ptr);
491 static int rh_status_urb (struct usb_hcd *hcd, struct urb *urb)
493 int len = 1 + (urb->dev->maxchild / 8);
495 /* rh_timer protected by hcd_data_lock */
496 if (hcd->rh_timer.data || urb->transfer_buffer_length < len) {
497 dev_dbg (hcd->self.controller,
498 "not queuing rh status urb, stat %d\n",
503 init_timer (&hcd->rh_timer);
504 hcd->rh_timer.function = rh_report_status;
505 hcd->rh_timer.data = (unsigned long) urb;
506 /* USB 2.0 spec says 256msec; this is close enough */
507 hcd->rh_timer.expires = jiffies + HZ/4;
508 add_timer (&hcd->rh_timer);
509 urb->hcpriv = hcd; /* nonzero to indicate it's queued */
515 static void rh_report_status (unsigned long ptr)
522 urb = (struct urb *) ptr;
523 local_irq_save (flags);
524 spin_lock (&urb->lock);
526 /* do nothing if the urb's been unlinked */
528 || urb->status != -EINPROGRESS
529 || (hcd = urb->dev->bus->hcpriv) == 0) {
530 spin_unlock (&urb->lock);
531 local_irq_restore (flags);
535 /* complete the status urb, or retrigger the timer */
536 spin_lock (&hcd_data_lock);
537 if (urb->dev->state == USB_STATE_CONFIGURED) {
538 length = hcd->driver->hub_status_data (
539 hcd, urb->transfer_buffer);
541 hcd->rh_timer.data = 0;
542 urb->actual_length = length;
546 mod_timer (&hcd->rh_timer, jiffies + HZ/4);
548 spin_unlock (&hcd_data_lock);
549 spin_unlock (&urb->lock);
551 /* local irqs are always blocked in completions */
553 usb_hcd_giveback_urb (hcd, urb, NULL);
554 local_irq_restore (flags);
557 /*-------------------------------------------------------------------------*/
559 static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
561 if (usb_pipeint (urb->pipe)) {
565 spin_lock_irqsave (&hcd_data_lock, flags);
566 retval = rh_status_urb (hcd, urb);
567 spin_unlock_irqrestore (&hcd_data_lock, flags);
570 if (usb_pipecontrol (urb->pipe))
571 return rh_call_control (hcd, urb);
576 /*-------------------------------------------------------------------------*/
578 static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
582 /* note: always a synchronous unlink */
583 if ((unsigned long) urb == hcd->rh_timer.data) {
584 del_timer_sync (&hcd->rh_timer);
585 hcd->rh_timer.data = 0;
587 local_irq_save (flags);
589 usb_hcd_giveback_urb (hcd, urb, NULL);
590 local_irq_restore (flags);
592 } else if (usb_pipeendpoint(urb->pipe) == 0) {
593 spin_lock_irq(&urb->lock); /* from usb_kill_urb */
595 spin_unlock_irq(&urb->lock);
597 wait_event(usb_kill_urb_queue,
598 atomic_read(&urb->use_count) == 0);
600 spin_lock_irq(&urb->lock);
602 spin_unlock_irq(&urb->lock);
609 /*-------------------------------------------------------------------------*/
611 /* exported only within usbcore */
612 struct usb_bus *usb_bus_get (struct usb_bus *bus)
614 struct class_device *tmp;
619 tmp = class_device_get(&bus->class_dev);
621 return to_usb_bus(tmp);
626 /* exported only within usbcore */
627 void usb_bus_put (struct usb_bus *bus)
630 class_device_put(&bus->class_dev);
633 /*-------------------------------------------------------------------------*/
635 static void usb_host_release(struct class_device *class_dev)
637 struct usb_bus *bus = to_usb_bus(class_dev);
643 static struct class usb_host_class = {
645 .release = &usb_host_release,
648 int usb_host_init(void)
650 return class_register(&usb_host_class);
653 void usb_host_cleanup(void)
655 class_unregister(&usb_host_class);
659 * usb_bus_init - shared initialization code
660 * @bus: the bus structure being initialized
662 * This code is used to initialize a usb_bus structure, memory for which is
663 * separately managed.
665 void usb_bus_init (struct usb_bus *bus)
667 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
669 bus->devnum_next = 1;
671 bus->root_hub = NULL;
674 bus->bandwidth_allocated = 0;
675 bus->bandwidth_int_reqs = 0;
676 bus->bandwidth_isoc_reqs = 0;
678 INIT_LIST_HEAD (&bus->bus_list);
680 EXPORT_SYMBOL (usb_bus_init);
683 * usb_alloc_bus - creates a new USB host controller structure
684 * @op: pointer to a struct usb_operations that this bus structure should use
685 * Context: !in_interrupt()
687 * Creates a USB host controller bus structure with the specified
688 * usb_operations and initializes all the necessary internal objects.
690 * If no memory is available, NULL is returned.
692 * The caller should call usb_put_bus() when it is finished with the structure.
694 struct usb_bus *usb_alloc_bus (struct usb_operations *op)
698 bus = kmalloc (sizeof *bus, GFP_KERNEL);
701 memset(bus, 0, sizeof(struct usb_bus));
706 EXPORT_SYMBOL (usb_alloc_bus);
708 /*-------------------------------------------------------------------------*/
711 * usb_register_bus - registers the USB host controller with the usb core
712 * @bus: pointer to the bus to register
713 * Context: !in_interrupt()
715 * Assigns a bus number, and links the controller into usbcore data
716 * structures so that it can be seen by scanning the bus list.
718 int usb_register_bus(struct usb_bus *bus)
723 down (&usb_bus_list_lock);
724 busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
725 if (busnum < USB_MAXBUS) {
726 set_bit (busnum, busmap.busmap);
727 bus->busnum = busnum;
729 printk (KERN_ERR "%s: too many buses\n", usbcore_name);
730 up(&usb_bus_list_lock);
734 snprintf(bus->class_dev.class_id, BUS_ID_SIZE, "usb%d", busnum);
735 bus->class_dev.class = &usb_host_class;
736 bus->class_dev.dev = bus->controller;
737 retval = class_device_register(&bus->class_dev);
739 clear_bit(busnum, busmap.busmap);
740 up(&usb_bus_list_lock);
744 /* Add it to the local list of buses */
745 list_add (&bus->bus_list, &usb_bus_list);
746 up (&usb_bus_list_lock);
750 dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
753 EXPORT_SYMBOL (usb_register_bus);
756 * usb_deregister_bus - deregisters the USB host controller
757 * @bus: pointer to the bus to deregister
758 * Context: !in_interrupt()
760 * Recycles the bus number, and unlinks the controller from usbcore data
761 * structures so that it won't be seen by scanning the bus list.
763 void usb_deregister_bus (struct usb_bus *bus)
765 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
768 * NOTE: make sure that all the devices are removed by the
769 * controller code, as well as having it call this when cleaning
772 down (&usb_bus_list_lock);
773 list_del (&bus->bus_list);
774 up (&usb_bus_list_lock);
776 usbfs_remove_bus (bus);
778 clear_bit (bus->busnum, busmap.busmap);
780 class_device_unregister(&bus->class_dev);
782 EXPORT_SYMBOL (usb_deregister_bus);
785 * usb_register_root_hub - called by HCD to register its root hub
786 * @usb_dev: the usb root hub device to be registered.
787 * @parent_dev: the parent device of this root hub.
789 * The USB host controller calls this function to register the root hub
790 * properly with the USB subsystem. It sets up the device properly in
791 * the device tree and stores the root_hub pointer in the bus structure,
792 * then calls usb_new_device() to register the usb device. It also
793 * assigns the root hub's USB address (always 1).
795 int usb_register_root_hub (struct usb_device *usb_dev, struct device *parent_dev)
797 const int devnum = 1;
800 usb_dev->devnum = devnum;
801 usb_dev->bus->devnum_next = devnum + 1;
802 memset (&usb_dev->bus->devmap.devicemap, 0,
803 sizeof usb_dev->bus->devmap.devicemap);
804 set_bit (devnum, usb_dev->bus->devmap.devicemap);
805 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
807 down (&usb_bus_list_lock);
808 usb_dev->bus->root_hub = usb_dev;
810 usb_dev->epmaxpacketin[0] = usb_dev->epmaxpacketout[0] = 64;
811 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
812 if (retval != sizeof usb_dev->descriptor) {
813 usb_dev->bus->root_hub = NULL;
814 up (&usb_bus_list_lock);
815 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
816 usb_dev->dev.bus_id, retval);
817 return (retval < 0) ? retval : -EMSGSIZE;
820 usb_lock_device (usb_dev);
821 retval = usb_new_device (usb_dev);
822 usb_unlock_device (usb_dev);
824 usb_dev->bus->root_hub = NULL;
825 dev_err (parent_dev, "can't register root hub for %s, %d\n",
826 usb_dev->dev.bus_id, retval);
828 up (&usb_bus_list_lock);
831 EXPORT_SYMBOL (usb_register_root_hub);
834 /*-------------------------------------------------------------------------*/
837 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
838 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
839 * @is_input: true iff the transaction sends data to the host
840 * @isoc: true for isochronous transactions, false for interrupt ones
841 * @bytecount: how many bytes in the transaction.
843 * Returns approximate bus time in nanoseconds for a periodic transaction.
844 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
845 * scheduled in software, this function is only used for such scheduling.
847 long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
852 case USB_SPEED_LOW: /* INTR only */
854 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
855 return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
857 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
858 return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
860 case USB_SPEED_FULL: /* ISOC or INTR */
862 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
863 return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp);
865 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
866 return (9107L + BW_HOST_DELAY + tmp);
868 case USB_SPEED_HIGH: /* ISOC or INTR */
869 // FIXME adjust for input vs output
871 tmp = HS_USECS (bytecount);
873 tmp = HS_USECS_ISO (bytecount);
876 pr_debug ("%s: bogus device speed!\n", usbcore_name);
880 EXPORT_SYMBOL (usb_calc_bus_time);
883 * usb_check_bandwidth():
885 * old_alloc is from host_controller->bandwidth_allocated in microseconds;
886 * bustime is from calc_bus_time(), but converted to microseconds.
888 * returns <bustime in us> if successful,
889 * or -ENOSPC if bandwidth request fails.
892 * This initial implementation does not use Endpoint.bInterval
893 * in managing bandwidth allocation.
894 * It probably needs to be expanded to use Endpoint.bInterval.
895 * This can be done as a later enhancement (correction).
897 * This will also probably require some kind of
898 * frame allocation tracking...meaning, for example,
899 * that if multiple drivers request interrupts every 10 USB frames,
900 * they don't all have to be allocated at
901 * frame numbers N, N+10, N+20, etc. Some of them could be at
902 * N+11, N+21, N+31, etc., and others at
903 * N+12, N+22, N+32, etc.
905 * Similarly for isochronous transfers...
907 * Individual HCDs can schedule more directly ... this logic
908 * is not correct for high speed transfers.
910 int usb_check_bandwidth (struct usb_device *dev, struct urb *urb)
912 unsigned int pipe = urb->pipe;
914 int is_in = usb_pipein (pipe);
915 int is_iso = usb_pipeisoc (pipe);
916 int old_alloc = dev->bus->bandwidth_allocated;
920 bustime = NS_TO_US (usb_calc_bus_time (dev->speed, is_in, is_iso,
921 usb_maxpacket (dev, pipe, !is_in)));
923 bustime /= urb->number_of_packets;
925 new_alloc = old_alloc + (int) bustime;
926 if (new_alloc > FRAME_TIME_MAX_USECS_ALLOC) {
929 #ifdef CONFIG_USB_BANDWIDTH
934 dev_dbg (&dev->dev, "usb_check_bandwidth %sFAILED: %d + %ld = %d usec\n",
935 mode, old_alloc, bustime, new_alloc);
937 #ifdef CONFIG_USB_BANDWIDTH
938 bustime = -ENOSPC; /* report error */
944 EXPORT_SYMBOL (usb_check_bandwidth);
948 * usb_claim_bandwidth - records bandwidth for a periodic transfer
949 * @dev: source/target of request
950 * @urb: request (urb->dev == dev)
951 * @bustime: bandwidth consumed, in (average) microseconds per frame
952 * @isoc: true iff the request is isochronous
954 * Bus bandwidth reservations are recorded purely for diagnostic purposes.
955 * HCDs are expected not to overcommit periodic bandwidth, and to record such
956 * reservations whenever endpoints are added to the periodic schedule.
958 * FIXME averaging per-frame is suboptimal. Better to sum over the HCD's
959 * entire periodic schedule ... 32 frames for OHCI, 1024 for UHCI, settable
960 * for EHCI (256/512/1024 frames, default 1024) and have the bus expose how
961 * large its periodic schedule is.
963 void usb_claim_bandwidth (struct usb_device *dev, struct urb *urb, int bustime, int isoc)
965 dev->bus->bandwidth_allocated += bustime;
967 dev->bus->bandwidth_isoc_reqs++;
969 dev->bus->bandwidth_int_reqs++;
970 urb->bandwidth = bustime;
972 #ifdef USB_BANDWIDTH_MESSAGES
973 dev_dbg (&dev->dev, "bandwidth alloc increased by %d (%s) to %d for %d requesters\n",
975 isoc ? "ISOC" : "INTR",
976 dev->bus->bandwidth_allocated,
977 dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
980 EXPORT_SYMBOL (usb_claim_bandwidth);
984 * usb_release_bandwidth - reverses effect of usb_claim_bandwidth()
985 * @dev: source/target of request
986 * @urb: request (urb->dev == dev)
987 * @isoc: true iff the request is isochronous
989 * This records that previously allocated bandwidth has been released.
990 * Bandwidth is released when endpoints are removed from the host controller's
993 void usb_release_bandwidth (struct usb_device *dev, struct urb *urb, int isoc)
995 dev->bus->bandwidth_allocated -= urb->bandwidth;
997 dev->bus->bandwidth_isoc_reqs--;
999 dev->bus->bandwidth_int_reqs--;
1001 #ifdef USB_BANDWIDTH_MESSAGES
1002 dev_dbg (&dev->dev, "bandwidth alloc reduced by %d (%s) to %d for %d requesters\n",
1004 isoc ? "ISOC" : "INTR",
1005 dev->bus->bandwidth_allocated,
1006 dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
1010 EXPORT_SYMBOL (usb_release_bandwidth);
1013 /*-------------------------------------------------------------------------*/
1016 * Generic HC operations.
1019 /*-------------------------------------------------------------------------*/
1021 /* called from khubd, or root hub init threads for hcd-private init */
1022 static int hcd_alloc_dev (struct usb_device *udev)
1024 struct hcd_dev *dev;
1025 struct usb_hcd *hcd;
1026 unsigned long flags;
1028 if (!udev || udev->hcpriv)
1030 if (!udev->bus || !udev->bus->hcpriv)
1032 hcd = udev->bus->hcpriv;
1033 if (hcd->state == USB_STATE_QUIESCING)
1036 dev = (struct hcd_dev *) kmalloc (sizeof *dev, GFP_KERNEL);
1039 memset (dev, 0, sizeof *dev);
1041 INIT_LIST_HEAD (&dev->dev_list);
1042 INIT_LIST_HEAD (&dev->urb_list);
1044 spin_lock_irqsave (&hcd_data_lock, flags);
1045 list_add (&dev->dev_list, &hcd->dev_list);
1046 // refcount is implicit
1048 spin_unlock_irqrestore (&hcd_data_lock, flags);
1053 /*-------------------------------------------------------------------------*/
1055 static void urb_unlink (struct urb *urb)
1057 unsigned long flags;
1059 /* Release any periodic transfer bandwidth */
1061 usb_release_bandwidth (urb->dev, urb,
1062 usb_pipeisoc (urb->pipe));
1064 /* clear all state linking urb to this dev (and hcd) */
1066 spin_lock_irqsave (&hcd_data_lock, flags);
1067 list_del_init (&urb->urb_list);
1068 spin_unlock_irqrestore (&hcd_data_lock, flags);
1069 usb_put_dev (urb->dev);
1073 /* may be called in any context with a valid urb->dev usecount
1074 * caller surrenders "ownership" of urb
1075 * expects usb_submit_urb() to have sanity checked and conditioned all
1078 static int hcd_submit_urb (struct urb *urb, int mem_flags)
1081 struct usb_hcd *hcd = urb->dev->bus->hcpriv;
1082 struct hcd_dev *dev = urb->dev->hcpriv;
1083 unsigned long flags;
1089 * FIXME: make urb timeouts be generic, keeping the HCD cores
1090 * as simple as possible.
1093 // NOTE: a generic device/urb monitoring hook would go here.
1094 // hcd_monitor_hook(MONITOR_URB_SUBMIT, urb)
1095 // It would catch submission paths for all urbs.
1098 * Atomically queue the urb, first to our records, then to the HCD.
1099 * Access to urb->status is controlled by urb->lock ... changes on
1100 * i/o completion (normal or fault) or unlinking.
1103 // FIXME: verify that quiescing hc works right (RH cleans up)
1105 spin_lock_irqsave (&hcd_data_lock, flags);
1106 if (unlikely (urb->reject))
1108 else switch (hcd->state) {
1109 case USB_STATE_RUNNING:
1110 case USB_STATE_RESUMING:
1111 usb_get_dev (urb->dev);
1112 list_add_tail (&urb->urb_list, &dev->urb_list);
1116 status = -ESHUTDOWN;
1119 spin_unlock_irqrestore (&hcd_data_lock, flags);
1121 INIT_LIST_HEAD (&urb->urb_list);
1125 /* increment urb's reference count as part of giving it to the HCD
1126 * (which now controls it). HCD guarantees that it either returns
1127 * an error or calls giveback(), but not both.
1129 urb = usb_get_urb (urb);
1130 atomic_inc (&urb->use_count);
1132 if (urb->dev == hcd->self.root_hub) {
1133 /* NOTE: requirement on hub callers (usbfs and the hub
1134 * driver, for now) that URBs' urb->transfer_buffer be
1135 * valid and usb_buffer_{sync,unmap}() not be needed, since
1136 * they could clobber root hub response data.
1138 urb->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP
1139 | URB_NO_SETUP_DMA_MAP);
1140 status = rh_urb_enqueue (hcd, urb);
1144 /* lower level hcd code should use *_dma exclusively,
1145 * unless it uses pio or talks to another transport.
1147 if (hcd->self.controller->dma_mask) {
1148 if (usb_pipecontrol (urb->pipe)
1149 && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
1150 urb->setup_dma = dma_map_single (
1151 hcd->self.controller,
1153 sizeof (struct usb_ctrlrequest),
1155 if (urb->transfer_buffer_length != 0
1156 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
1157 urb->transfer_dma = dma_map_single (
1158 hcd->self.controller,
1159 urb->transfer_buffer,
1160 urb->transfer_buffer_length,
1161 usb_pipein (urb->pipe)
1166 status = hcd->driver->urb_enqueue (hcd, urb, mem_flags);
1168 if (unlikely (status)) {
1170 atomic_dec (&urb->use_count);
1172 wake_up (&usb_kill_urb_queue);
1178 /*-------------------------------------------------------------------------*/
1180 /* called in any context */
1181 static int hcd_get_frame_number (struct usb_device *udev)
1183 struct usb_hcd *hcd = (struct usb_hcd *)udev->bus->hcpriv;
1184 if (!HCD_IS_RUNNING (hcd->state))
1186 return hcd->driver->get_frame_number (hcd);
1189 /*-------------------------------------------------------------------------*/
1191 /* this makes the hcd giveback() the urb more quickly, by kicking it
1192 * off hardware queues (which may take a while) and returning it as
1193 * soon as practical. we've already set up the urb's return status,
1194 * but we can't know if the callback completed already.
1197 unlink1 (struct usb_hcd *hcd, struct urb *urb)
1201 if (urb->dev == hcd->self.root_hub)
1202 value = usb_rh_urb_dequeue (hcd, urb);
1205 /* The only reason an HCD might fail this call is if
1206 * it has not yet fully queued the urb to begin with.
1207 * Such failures should be harmless. */
1208 value = hcd->driver->urb_dequeue (hcd, urb);
1212 dev_dbg (hcd->self.controller, "dequeue %p --> %d\n",
1218 * called in any context
1220 * caller guarantees urb won't be recycled till both unlink()
1221 * and the urb's completion function return
1223 static int hcd_unlink_urb (struct urb *urb, int status)
1225 struct hcd_dev *dev;
1226 struct usb_hcd *hcd = NULL;
1227 struct device *sys = NULL;
1228 unsigned long flags;
1229 struct list_head *tmp;
1236 * we contend for urb->status with the hcd core,
1237 * which changes it while returning the urb.
1239 * Caller guaranteed that the urb pointer hasn't been freed, and
1240 * that it was submitted. But as a rule it can't know whether or
1241 * not it's already been unlinked ... so we respect the reversed
1242 * lock sequence needed for the usb_hcd_giveback_urb() code paths
1243 * (urb lock, then hcd_data_lock) in case some other CPU is now
1246 spin_lock_irqsave (&urb->lock, flags);
1247 spin_lock (&hcd_data_lock);
1249 if (!urb->dev || !urb->dev->bus) {
1254 dev = urb->dev->hcpriv;
1255 sys = &urb->dev->dev;
1256 hcd = urb->dev->bus->hcpriv;
1262 /* running ~= hc unlink handshake works (irq, timer, etc)
1263 * halted ~= no unlink handshake is needed
1264 * suspended, resuming == should never happen
1266 WARN_ON (!HCD_IS_RUNNING (hcd->state) && hcd->state != USB_STATE_HALT);
1268 /* insist the urb is still queued */
1269 list_for_each(tmp, &dev->urb_list) {
1270 if (tmp == &urb->urb_list)
1273 if (tmp != &urb->urb_list) {
1278 /* Any status except -EINPROGRESS means something already started to
1279 * unlink this URB from the hardware. So there's no more work to do.
1281 if (urb->status != -EINPROGRESS) {
1286 /* PCI IRQ setup can easily be broken so that USB controllers
1287 * never get completion IRQs ... maybe even the ones we need to
1288 * finish unlinking the initial failed usb_set_address().
1290 if (!hcd->saw_irq && hcd->self.root_hub != urb->dev) {
1291 dev_warn (hcd->self.controller, "Unlink after no-IRQ? "
1292 "Different ACPI or APIC settings may help."
1297 urb->status = status;
1299 spin_unlock (&hcd_data_lock);
1300 spin_unlock_irqrestore (&urb->lock, flags);
1302 retval = unlink1 (hcd, urb);
1304 retval = -EINPROGRESS;
1308 spin_unlock (&hcd_data_lock);
1309 spin_unlock_irqrestore (&urb->lock, flags);
1310 if (retval != -EIDRM && sys && sys->driver)
1311 dev_dbg (sys, "hcd_unlink_urb %p fail %d\n", urb, retval);
1315 /*-------------------------------------------------------------------------*/
1317 /* disables the endpoint: cancels any pending urbs, then synchronizes with
1318 * the hcd to make sure all endpoint state is gone from hardware. use for
1319 * set_configuration, set_interface, driver removal, physical disconnect.
1321 * example: a qh stored in hcd_dev.ep[], holding state related to endpoint
1322 * type, maxpacket size, toggle, halt status, and scheduling.
1324 static void hcd_endpoint_disable (struct usb_device *udev, int endpoint)
1326 struct hcd_dev *dev;
1327 struct usb_hcd *hcd;
1329 unsigned epnum = endpoint & USB_ENDPOINT_NUMBER_MASK;
1332 hcd = udev->bus->hcpriv;
1334 WARN_ON (!HCD_IS_RUNNING (hcd->state) && hcd->state != USB_STATE_HALT);
1336 local_irq_disable ();
1339 /* (re)block new requests, as best we can */
1340 if (endpoint & USB_DIR_IN)
1341 udev->epmaxpacketin [epnum] = 0;
1343 udev->epmaxpacketout [epnum] = 0;
1345 /* then kill any current requests */
1346 spin_lock (&hcd_data_lock);
1347 list_for_each_entry (urb, &dev->urb_list, urb_list) {
1348 int tmp = urb->pipe;
1350 /* ignore urbs for other endpoints */
1351 if (usb_pipeendpoint (tmp) != epnum)
1353 /* NOTE assumption that only ep0 is a control endpoint */
1354 if (epnum != 0 && ((tmp ^ endpoint) & USB_DIR_IN))
1357 /* another cpu may be in hcd, spinning on hcd_data_lock
1358 * to giveback() this urb. the races here should be
1359 * small, but a full fix needs a new "can't submit"
1362 if (urb->status != -EINPROGRESS)
1365 spin_unlock (&hcd_data_lock);
1367 spin_lock (&urb->lock);
1369 if (tmp == -EINPROGRESS)
1370 urb->status = -ESHUTDOWN;
1371 spin_unlock (&urb->lock);
1373 /* kick hcd unless it's already returning this */
1374 if (tmp == -EINPROGRESS) {
1377 dev_dbg (hcd->self.controller,
1378 "shutdown urb %p pipe %08x ep%d%s%s\n",
1379 urb, tmp, usb_pipeendpoint (tmp),
1380 (tmp & USB_DIR_IN) ? "in" : "out",
1382 switch (usb_pipetype (tmp)) { \
1383 case PIPE_CONTROL: s = ""; break; \
1384 case PIPE_BULK: s = "-bulk"; break; \
1385 case PIPE_INTERRUPT: s = "-intr"; break; \
1386 default: s = "-iso"; break; \
1391 /* list contents may have changed */
1394 spin_unlock (&hcd_data_lock);
1395 local_irq_enable ();
1397 /* synchronize with the hardware, so old configuration state
1398 * clears out immediately (and will be freed).
1401 if (hcd->driver->endpoint_disable)
1402 hcd->driver->endpoint_disable (hcd, dev, endpoint);
1405 /*-------------------------------------------------------------------------*/
1407 #ifdef CONFIG_USB_SUSPEND
1409 static int hcd_hub_suspend (struct usb_bus *bus)
1411 struct usb_hcd *hcd;
1413 hcd = container_of (bus, struct usb_hcd, self);
1414 if (hcd->driver->hub_suspend)
1415 return hcd->driver->hub_suspend (hcd);
1419 static int hcd_hub_resume (struct usb_bus *bus)
1421 struct usb_hcd *hcd;
1423 hcd = container_of (bus, struct usb_hcd, self);
1424 if (hcd->driver->hub_resume)
1425 return hcd->driver->hub_resume (hcd);
1431 /*-------------------------------------------------------------------------*/
1433 #ifdef CONFIG_USB_OTG
1436 * usb_bus_start_enum - start immediate enumeration (for OTG)
1437 * @bus: the bus (must use hcd framework)
1438 * @port: 1-based number of port; usually bus->otg_port
1439 * Context: in_interrupt()
1441 * Starts enumeration, with an immediate reset followed later by
1442 * khubd identifying and possibly configuring the device.
1443 * This is needed by OTG controller drivers, where it helps meet
1444 * HNP protocol timing requirements for starting a port reset.
1446 int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
1448 struct usb_hcd *hcd;
1449 int status = -EOPNOTSUPP;
1451 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
1452 * boards with root hubs hooked up to internal devices (instead of
1453 * just the OTG port) may need more attention to resetting...
1455 hcd = container_of (bus, struct usb_hcd, self);
1456 if (port_num && hcd->driver->start_port_reset)
1457 status = hcd->driver->start_port_reset(hcd, port_num);
1459 /* run khubd shortly after (first) root port reset finishes;
1460 * it may issue others, until at least 50 msecs have passed.
1463 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
1466 EXPORT_SYMBOL (usb_bus_start_enum);
1470 /*-------------------------------------------------------------------------*/
1472 /* called by khubd, rmmod, apmd, or other thread for hcd-private cleanup.
1473 * we're guaranteed that the device is fully quiesced. also, that each
1474 * endpoint has been hcd_endpoint_disabled.
1477 static int hcd_free_dev (struct usb_device *udev)
1479 struct hcd_dev *dev;
1480 struct usb_hcd *hcd;
1481 unsigned long flags;
1483 if (!udev || !udev->hcpriv)
1486 if (!udev->bus || !udev->bus->hcpriv)
1489 // should udev->devnum == -1 ??
1492 hcd = udev->bus->hcpriv;
1494 /* device driver problem with refcounts? */
1495 if (!list_empty (&dev->urb_list)) {
1496 dev_dbg (hcd->self.controller, "free busy dev, %s devnum %d (bug!)\n",
1497 hcd->self.bus_name, udev->devnum);
1501 spin_lock_irqsave (&hcd_data_lock, flags);
1502 list_del (&dev->dev_list);
1503 udev->hcpriv = NULL;
1504 spin_unlock_irqrestore (&hcd_data_lock, flags);
1511 * usb_hcd_operations - adapts usb_bus framework to HCD framework (bus glue)
1513 * When registering a USB bus through the HCD framework code, use this
1514 * usb_operations vector. The PCI glue layer does so automatically; only
1515 * bus glue for non-PCI system busses will need to use this.
1517 struct usb_operations usb_hcd_operations = {
1518 .allocate = hcd_alloc_dev,
1519 .get_frame_number = hcd_get_frame_number,
1520 .submit_urb = hcd_submit_urb,
1521 .unlink_urb = hcd_unlink_urb,
1522 .deallocate = hcd_free_dev,
1523 .buffer_alloc = hcd_buffer_alloc,
1524 .buffer_free = hcd_buffer_free,
1525 .disable = hcd_endpoint_disable,
1526 #ifdef CONFIG_USB_SUSPEND
1527 .hub_suspend = hcd_hub_suspend,
1528 .hub_resume = hcd_hub_resume,
1531 EXPORT_SYMBOL (usb_hcd_operations);
1533 /*-------------------------------------------------------------------------*/
1536 * usb_hcd_giveback_urb - return URB from HCD to device driver
1537 * @hcd: host controller returning the URB
1538 * @urb: urb being returned to the USB device driver.
1539 * @regs: pt_regs, passed down to the URB completion handler
1540 * Context: in_interrupt()
1542 * This hands the URB from HCD to its USB device driver, using its
1543 * completion function. The HCD has freed all per-urb resources
1544 * (and is done using urb->hcpriv). It also released all HCD locks;
1545 * the device driver won't cause problems if it frees, modifies,
1546 * or resubmits this URB.
1548 void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs)
1552 // NOTE: a generic device/urb monitoring hook would go here.
1553 // hcd_monitor_hook(MONITOR_URB_FINISH, urb, dev)
1554 // It would catch exit/unlink paths for all urbs.
1556 /* lower level hcd code should use *_dma exclusively */
1557 if (hcd->self.controller->dma_mask) {
1558 if (usb_pipecontrol (urb->pipe)
1559 && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
1560 dma_unmap_single (hcd->self.controller, urb->setup_dma,
1561 sizeof (struct usb_ctrlrequest),
1563 if (urb->transfer_buffer_length != 0
1564 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
1565 dma_unmap_single (hcd->self.controller,
1567 urb->transfer_buffer_length,
1568 usb_pipein (urb->pipe)
1573 /* pass ownership to the completion handler */
1574 urb->complete (urb, regs);
1575 atomic_dec (&urb->use_count);
1576 if (unlikely (urb->reject))
1577 wake_up (&usb_kill_urb_queue);
1580 EXPORT_SYMBOL (usb_hcd_giveback_urb);
1582 /*-------------------------------------------------------------------------*/
1585 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
1586 * @irq: the IRQ being raised
1587 * @__hcd: pointer to the HCD whose IRQ is beinng signaled
1588 * @r: saved hardware registers
1590 * When registering a USB bus through the HCD framework code, use this
1591 * to handle interrupts. The PCI glue layer does so automatically; only
1592 * bus glue for non-PCI system busses will need to use this.
1594 irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs * r)
1596 struct usb_hcd *hcd = __hcd;
1597 int start = hcd->state;
1599 if (start == USB_STATE_HALT)
1601 if (hcd->driver->irq (hcd, r) == IRQ_NONE)
1605 if (hcd->state != start && hcd->state == USB_STATE_HALT)
1609 EXPORT_SYMBOL (usb_hcd_irq);
1611 /*-------------------------------------------------------------------------*/
1614 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
1615 * @hcd: pointer to the HCD representing the controller
1617 * This is called by bus glue to report a USB host controller that died
1618 * while operations may still have been pending. It's called automatically
1619 * by the PCI glue, so only glue for non-PCI busses should need to call it.
1621 void usb_hc_died (struct usb_hcd *hcd)
1623 dev_err (hcd->self.controller, "HC died; cleaning up\n");
1625 /* make khubd clean up old urbs and devices */
1626 usb_set_device_state(hcd->self.root_hub, USB_STATE_NOTATTACHED);
1627 mod_timer(&hcd->rh_timer, jiffies);
1629 EXPORT_SYMBOL (usb_hc_died);
1631 /*-------------------------------------------------------------------------*/
1633 void usb_hcd_release(struct usb_bus *bus)
1635 struct usb_hcd *hcd;
1637 hcd = container_of (bus, struct usb_hcd, self);
1640 EXPORT_SYMBOL (usb_hcd_release);