2 # USB Serial device configuration
5 menu "USB Serial Converter support"
9 tristate "USB Serial Converter support"
12 Say Y here if you have a USB device that provides normal serial
13 ports, or acts like a serial device, and you want to connect it to
16 Please read <file:Documentation/usb/usb-serial.txt> for more
17 information on the specifics of the different devices that are
18 supported, and on how to use them.
20 To compile this driver as a module, choose M here: the
21 module will be called usbserial.
23 config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support (EXPERIMENTAL)"
25 depends on USB_SERIAL=y && EXPERIMENTAL
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
46 config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
50 Say Y here if you want to use the generic USB serial driver. Please
51 read <file:Documentation/usb/usb-serial.txt> for more information on
52 using this driver. It is recommended that the "USB Serial converter
53 support" be compiled as a module for this driver to be used
56 config USB_SERIAL_BELKIN
57 tristate "USB Belkin and Peracom Single Port Serial Driver"
60 Say Y here if you want to use a Belkin USB Serial single port
61 adaptor (F5U103 is one of the model numbers) or the Peracom single
62 port USB to serial adapter.
64 To compile this driver as a module, choose M here: the
65 module will be called belkin_sa.
67 config USB_SERIAL_WHITEHEAT
68 tristate "USB ConnectTech WhiteHEAT Serial Driver"
69 depends on USB_SERIAL && BROKEN_ON_SMP
71 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
72 USB to serial converter device.
74 To compile this driver as a module, choose M here: the
75 module will be called whiteheat.
77 config USB_SERIAL_DIGI_ACCELEPORT
78 tristate "USB Digi International AccelePort USB Serial Driver"
81 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
82 2 port (plus parallel port) and 4 port USB serial converters. The
83 parallel port on the USB 2 appears as a third serial port on Linux.
84 The Digi Acceleport USB 8 is not yet supported by this driver.
86 This driver works under SMP with the usb-uhci driver. It does not
87 work under SMP with the uhci driver.
89 To compile this driver as a module, choose M here: the
90 module will be called digi_acceleport.
92 config USB_SERIAL_CYPRESS_M8
93 tristate "USB Cypress M8 USB Serial Driver"
94 depends on USB_SERIAL && EXPERIMENTAL
96 Say Y here if you want to use a device that contains the Cypress
97 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
99 Attempted SMP support... send bug reports!
101 Supported microcontrollers in the CY4601 family are:
102 CY7C63741 CY7C63742 CY7C63743 CY7C64013
104 To compile this driver as a module, choose M here: the
105 module will be called cypress_m8.
107 config USB_SERIAL_EMPEG
108 tristate "USB Empeg empeg-car Mark I/II Driver"
109 depends on USB_SERIAL
111 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
112 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
113 device node. See <file:Documentation/usb/usb-serial.txt> for more
114 tidbits of information.
116 To compile this driver as a module, choose M here: the
117 module will be called empeg.
119 config USB_SERIAL_FTDI_SIO
120 tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
121 depends on USB_SERIAL && EXPERIMENTAL
123 Say Y here if you want to use a FTDI SIO single port USB to serial
124 converter device. The implementation I have is called the USC-1000.
125 This driver has also be tested with the 245 and 232 devices.
127 See <http://ftdi-usb-sio.sourceforge.net/> for more
128 information on this driver and the device.
130 To compile this driver as a module, choose M here: the
131 module will be called ftdi_sio.
133 config USB_SERIAL_VISOR
134 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
135 depends on USB_SERIAL
137 Say Y here if you want to connect to your HandSpring Visor, Palm
138 m500 or m505 through its USB docking station. See
139 <http://usbvisor.sourceforge.net/> for more information on using this
142 To compile this driver as a module, choose M here: the
143 module will be called visor.
145 config USB_SERIAL_IPAQ
146 tristate "USB PocketPC PDA Driver"
147 depends on USB_SERIAL
149 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
150 or any other PDA running Windows CE 3.0 or PocketPC 2002
151 using a USB cradle/cable. For information on using the driver,
152 read <file:Documentation/usb/usb-serial.txt>.
154 To compile this driver as a module, choose M here: the
155 module will be called ipaq.
158 tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
159 depends on USB_SERIAL && EXPERIMENTAL
161 Say Y here if you want to enable simple serial support for USB IrDA
162 devices. This is useful if you do not want to use the full IrDA
165 To compile this driver as a module, choose M here: the
166 module will be called ir-usb.
168 config USB_SERIAL_EDGEPORT
169 tristate "USB Inside Out Edgeport Serial Driver"
170 depends on USB_SERIAL
172 Say Y here if you want to use any of the following devices from
173 Inside Out Networks (Digi):
191 To compile this driver as a module, choose M here: the
192 module will be called io_edgeport.
194 config USB_SERIAL_EDGEPORT_TI
195 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
196 depends on USB_SERIAL
198 Say Y here if you want to use any of the devices from Inside Out
199 Networks (Digi) that are not supported by the io_edgeport driver.
200 This includes the Edgeport/1 device.
202 To compile this driver as a module, choose M here: the
203 module will be called io_ti.
205 config USB_SERIAL_GARMIN
206 tristate "USB Garmin GPS driver"
207 depends on USB_SERIAL
209 Say Y here if you want to connect to your Garmin GPS.
210 Should work with most Garmin GPS devices which have a native USB port.
212 See <http://sourceforge.net/projects/garmin-gps> for the latest
213 version of the driver.
215 To compile this driver as a module, choose M here: the
216 module will be called garmin_gps.
218 config USB_SERIAL_IPW
219 tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
220 depends on USB_SERIAL && EXPERIMENTAL
222 Say Y here if you want to use a IPWireless USB modem such as
223 the ones supplied by Axity3G/Sentech South Africa.
225 To compile this driver as a module, choose M here: the
226 module will be called ipw.
228 config USB_SERIAL_KEYSPAN_PDA
229 tristate "USB Keyspan PDA Single Port Serial Driver"
230 depends on USB_SERIAL
232 Say Y here if you want to use a Keyspan PDA single port USB to
233 serial converter device. This driver makes use of firmware
234 developed from scratch by Brian Warner.
236 To compile this driver as a module, choose M here: the
237 module will be called keyspan_pda.
239 config USB_SERIAL_KEYSPAN
240 tristate "USB Keyspan USA-xxx Serial Driver"
241 depends on USB_SERIAL
243 Say Y here if you want to use Keyspan USB to serial converter
244 devices. This driver makes use of Keyspan's official firmware
245 and was developed with their support. You must also include
246 firmware to support your particular device(s).
248 See <http://misc.nu/hugh/keyspan.html> for more information.
250 To compile this driver as a module, choose M here: the
251 module will be called keyspan.
253 config USB_SERIAL_KEYSPAN_MPR
254 bool "USB Keyspan MPR Firmware"
255 depends on USB_SERIAL_KEYSPAN
257 Say Y here to include firmware for the Keyspan MPR converter.
259 config USB_SERIAL_KEYSPAN_USA28
260 bool "USB Keyspan USA-28 Firmware"
261 depends on USB_SERIAL_KEYSPAN
263 Say Y here to include firmware for the USA-28 converter.
265 config USB_SERIAL_KEYSPAN_USA28X
266 bool "USB Keyspan USA-28X Firmware"
267 depends on USB_SERIAL_KEYSPAN
269 Say Y here to include firmware for the USA-28X converter.
270 Be sure you have a USA-28X, there are also 28XA and 28XB
271 models, the label underneath has the actual part number.
273 config USB_SERIAL_KEYSPAN_USA28XA
274 bool "USB Keyspan USA-28XA Firmware"
275 depends on USB_SERIAL_KEYSPAN
277 Say Y here to include firmware for the USA-28XA converter.
278 Be sure you have a USA-28XA, there are also 28X and 28XB
279 models, the label underneath has the actual part number.
281 config USB_SERIAL_KEYSPAN_USA28XB
282 bool "USB Keyspan USA-28XB Firmware"
283 depends on USB_SERIAL_KEYSPAN
285 Say Y here to include firmware for the USA-28XB converter.
286 Be sure you have a USA-28XB, there are also 28X and 28XA
287 models, the label underneath has the actual part number.
289 config USB_SERIAL_KEYSPAN_USA19
290 bool "USB Keyspan USA-19 Firmware"
291 depends on USB_SERIAL_KEYSPAN
293 Say Y here to include firmware for the USA-19 converter.
295 config USB_SERIAL_KEYSPAN_USA18X
296 bool "USB Keyspan USA-18X Firmware"
297 depends on USB_SERIAL_KEYSPAN
299 Say Y here to include firmware for the USA-18X converter.
301 config USB_SERIAL_KEYSPAN_USA19W
302 bool "USB Keyspan USA-19W Firmware"
303 depends on USB_SERIAL_KEYSPAN
305 Say Y here to include firmware for the USA-19W converter.
307 config USB_SERIAL_KEYSPAN_USA19QW
308 bool "USB Keyspan USA-19QW Firmware"
309 depends on USB_SERIAL_KEYSPAN
311 Say Y here to include firmware for the USA-19QW converter.
313 config USB_SERIAL_KEYSPAN_USA19QI
314 bool "USB Keyspan USA-19QI Firmware"
315 depends on USB_SERIAL_KEYSPAN
317 Say Y here to include firmware for the USA-19QI converter.
319 config USB_SERIAL_KEYSPAN_USA49W
320 bool "USB Keyspan USA-49W Firmware"
321 depends on USB_SERIAL_KEYSPAN
323 Say Y here to include firmware for the USA-49W converter.
325 config USB_SERIAL_KEYSPAN_USA49WLC
326 bool "USB Keyspan USA-49WLC Firmware"
327 depends on USB_SERIAL_KEYSPAN
329 Say Y here to include firmware for the USA-49WLC converter.
331 config USB_SERIAL_KLSI
332 tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
333 depends on USB_SERIAL && EXPERIMENTAL
335 Say Y here if you want to use a KL5KUSB105 - based single port
336 serial adapter. The most widely known -- and currently the only
337 tested -- device in this category is the PalmConnect USB Serial
338 adapter sold by Palm Inc. for use with their Palm III and Palm V
341 Please read <file:Documentation/usb/usb-serial.txt> for more
344 To compile this driver as a module, choose M here: the
345 module will be called kl5kusb105.
347 config USB_SERIAL_KOBIL_SCT
348 tristate "USB KOBIL chipcard reader"
349 depends on USB_SERIAL
351 Say Y here if you want to use one of the following KOBIL USB chipcard
357 - SecOVID Reader Plus
361 Note that you need a current CT-API.
362 To compile this driver as a module, choose M here: the
363 module will be called kobil_sct.
365 config USB_SERIAL_MCT_U232
366 tristate "USB MCT Single Port Serial Driver"
367 depends on USB_SERIAL
369 Say Y here if you want to use a USB Serial single port adapter from
370 Magic Control Technology Corp. (U232 is one of the model numbers).
372 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
375 To compile this driver as a module, choose M here: the
376 module will be called mct_u232.
378 config USB_SERIAL_PL2303
379 tristate "USB Prolific 2303 Single Port Serial Driver"
380 depends on USB_SERIAL
382 Say Y here if you want to use the PL2303 USB Serial single port
383 adapter from Prolific.
385 To compile this driver as a module, choose M here: the
386 module will be called pl2303.
388 config USB_SERIAL_SAFE
389 tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
390 depends on USB_SERIAL && EXPERIMENTAL
392 config USB_SERIAL_SAFE_PADDED
393 bool "USB Secure Encapsulated Driver - Padded"
394 depends on USB_SERIAL_SAFE
397 tristate "USB TI 3410/5052 Serial Driver"
398 depends on USB_SERIAL
400 Say Y here if you want to use the TI USB 3410 or 5052
403 To compile this driver as a module, choose M here: the
404 module will be called ti_usb_3410_5052.
406 config USB_SERIAL_CYBERJACK
407 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
408 depends on USB_SERIAL && EXPERIMENTAL
410 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
411 reader. This is an interface to ISO 7816 compatible contactbased
412 chipcards, e.g. GSM SIMs.
414 To compile this driver as a module, choose M here: the
415 module will be called cyberjack.
419 config USB_SERIAL_XIRCOM
420 tristate "USB Xircom / Entregra Single Port Serial Driver"
421 depends on USB_SERIAL
423 Say Y here if you want to use a Xircom or Entregra single port USB to
424 serial converter device. This driver makes use of firmware
425 developed from scratch by Brian Warner.
427 To compile this driver as a module, choose M here: the
428 module will be called keyspan_pda.
430 config USB_SERIAL_OMNINET
431 tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
432 depends on USB_SERIAL && EXPERIMENTAL
434 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
436 To compile this driver as a module, choose M here: the
437 module will be called omninet.
441 depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT