2 # USB Serial device configuration
5 menu "USB Serial Converter support"
9 tristate "USB Serial Converter support"
12 Say Y here if you have a USB device that provides normal serial
13 ports, or acts like a serial device, and you want to connect it to
16 Please read <file:Documentation/usb/usb-serial.txt> for more
17 information on the specifics of the different devices that are
18 supported, and on how to use them.
20 To compile this driver as a module, choose M here: the
21 module will be called usbserial.
23 config USB_SERIAL_DEBUG
24 bool "USB Serial Converter verbose debug"
25 depends on USB_SERIAL=y
27 Say Y here if you want verbose debug messages from the USB Serial
28 Drivers sent to the kernel debug log.
30 config USB_SERIAL_CONSOLE
31 bool "USB Serial Console device support (EXPERIMENTAL)"
32 depends on USB_SERIAL=y && EXPERIMENTAL
34 If you say Y here, it will be possible to use a USB to serial
35 converter port as the system console (the system console is the
36 device which receives all kernel messages and warnings and which
37 allows logins in single user mode). This could be useful if some
38 terminal or printer is connected to that serial port.
40 Even if you say Y here, the currently visible virtual console
41 (/dev/tty0) will still be used as the system console by default, but
42 you can alter that using a kernel command line option such as
43 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
44 your boot loader (lilo or loadlin) about how to pass options to the
47 If you don't have a VGA card installed and you say Y here, the
48 kernel will automatically use the first USB to serial converter
49 port, /dev/ttyUSB0, as system console.
53 config USB_SERIAL_GENERIC
54 bool "USB Generic Serial Driver"
57 Say Y here if you want to use the generic USB serial driver. Please
58 read <file:Documentation/usb/usb-serial.txt> for more information on
59 using this driver. It is recommended that the "USB Serial converter
60 support" be compiled as a module for this driver to be used
63 config USB_SERIAL_BELKIN
64 tristate "USB Belkin and Peracom Single Port Serial Driver"
67 Say Y here if you want to use a Belkin USB Serial single port
68 adaptor (F5U103 is one of the model numbers) or the Peracom single
69 port USB to serial adapter.
71 To compile this driver as a module, choose M here: the
72 module will be called belkin_sa.
74 config USB_SERIAL_WHITEHEAT
75 tristate "USB ConnectTech WhiteHEAT Serial Driver"
76 depends on USB_SERIAL && BROKEN_ON_SMP
78 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
79 USB to serial converter device.
81 To compile this driver as a module, choose M here: the
82 module will be called whiteheat.
84 config USB_SERIAL_DIGI_ACCELEPORT
85 tristate "USB Digi International AccelePort USB Serial Driver"
88 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
89 2 port (plus parallel port) and 4 port USB serial converters. The
90 parallel port on the USB 2 appears as a third serial port on Linux.
91 The Digi Acceleport USB 8 is not yet supported by this driver.
93 This driver works under SMP with the usb-uhci driver. It does not
94 work under SMP with the uhci driver.
96 To compile this driver as a module, choose M here: the
97 module will be called digi_acceleport.
99 config USB_SERIAL_EMPEG
100 tristate "USB Empeg empeg-car Mark I/II Driver"
101 depends on USB_SERIAL
103 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
104 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
105 device node. See <file:Documentation/usb/usb-serial.txt> for more
106 tidbits of information.
108 To compile this driver as a module, choose M here: the
109 module will be called empeg.
111 config USB_SERIAL_FTDI_SIO
112 tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
113 depends on USB_SERIAL && EXPERIMENTAL
115 Say Y here if you want to use a FTDI SIO single port USB to serial
116 converter device. The implementation I have is called the USC-1000.
117 This driver has also be tested with the 245 and 232 devices.
119 See <http://ftdi-usb-sio.sourceforge.net/> for more
120 information on this driver and the device.
122 To compile this driver as a module, choose M here: the
123 module will be called ftdi_sio.
125 config USB_SERIAL_VISOR
126 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
127 depends on USB_SERIAL
129 Say Y here if you want to connect to your HandSpring Visor, Palm
130 m500 or m505 through its USB docking station. See
131 <http://usbvisor.sourceforge.net/> for more information on using this
134 To compile this driver as a module, choose M here: the
135 module will be called visor.
137 config USB_SERIAL_IPAQ
138 tristate "USB PocketPC PDA Driver"
139 depends on USB_SERIAL
141 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
142 or any other PDA running Windows CE 3.0 or PocketPC 2002
143 using a USB cradle/cable. For information on using the driver,
144 read <file:Documentation/usb/usb-serial.txt>.
146 To compile this driver as a module, choose M here: the
147 module will be called ipaq.
150 tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
151 depends on USB_SERIAL && EXPERIMENTAL
153 Say Y here if you want to enable simple serial support for USB IrDA
154 devices. This is useful if you do not want to use the full IrDA
157 To compile this driver as a module, choose M here: the
158 module will be called ir-usb.
160 config USB_SERIAL_EDGEPORT
161 tristate "USB Inside Out Edgeport Serial Driver"
162 depends on USB_SERIAL
164 Say Y here if you want to use any of the following devices from
165 Inside Out Networks (Digi):
183 To compile this driver as a module, choose M here: the
184 module will be called io_edgeport.
186 config USB_SERIAL_EDGEPORT_TI
187 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
188 depends on USB_SERIAL
190 Say Y here if you want to use any of the devices from Inside Out
191 Networks (Digi) that are not supported by the io_edgeport driver.
192 This includes the Edgeport/1 device.
194 To compile this driver as a module, choose M here: the
195 module will be called io_ti.
197 config USB_SERIAL_KEYSPAN_PDA
198 tristate "USB Keyspan PDA Single Port Serial Driver"
199 depends on USB_SERIAL
201 Say Y here if you want to use a Keyspan PDA single port USB to
202 serial converter device. This driver makes use of firmware
203 developed from scratch by Brian Warner.
205 To compile this driver as a module, choose M here: the
206 module will be called keyspan_pda.
208 config USB_SERIAL_KEYSPAN
209 tristate "USB Keyspan USA-xxx Serial Driver"
210 depends on USB_SERIAL
212 Say Y here if you want to use Keyspan USB to serial converter
213 devices. This driver makes use of Keyspan's official firmware
214 and was developed with their support. You must also include
215 firmware to support your particular device(s).
217 See <http://misc.nu/hugh/keyspan.html> for more information.
219 To compile this driver as a module, choose M here: the
220 module will be called keyspan.
222 config USB_SERIAL_KEYSPAN_MPR
223 bool "USB Keyspan MPR Firmware"
224 depends on USB_SERIAL_KEYSPAN
226 Say Y here to include firmware for the Keyspan MPR converter.
228 config USB_SERIAL_KEYSPAN_USA28
229 bool "USB Keyspan USA-28 Firmware"
230 depends on USB_SERIAL_KEYSPAN
232 Say Y here to include firmware for the USA-28 converter.
234 config USB_SERIAL_KEYSPAN_USA28X
235 bool "USB Keyspan USA-28X Firmware"
236 depends on USB_SERIAL_KEYSPAN
238 Say Y here to include firmware for the USA-28X converter.
239 Be sure you have a USA-28X, there are also 28XA and 28XB
240 models, the label underneath has the actual part number.
242 config USB_SERIAL_KEYSPAN_USA28XA
243 bool "USB Keyspan USA-28XA Firmware"
244 depends on USB_SERIAL_KEYSPAN
246 Say Y here to include firmware for the USA-28XA converter.
247 Be sure you have a USA-28XA, there are also 28X and 28XB
248 models, the label underneath has the actual part number.
250 config USB_SERIAL_KEYSPAN_USA28XB
251 bool "USB Keyspan USA-28XB Firmware"
252 depends on USB_SERIAL_KEYSPAN
254 Say Y here to include firmware for the USA-28XB converter.
255 Be sure you have a USA-28XB, there are also 28X and 28XA
256 models, the label underneath has the actual part number.
258 config USB_SERIAL_KEYSPAN_USA19
259 bool "USB Keyspan USA-19 Firmware"
260 depends on USB_SERIAL_KEYSPAN
262 Say Y here to include firmware for the USA-19 converter.
264 config USB_SERIAL_KEYSPAN_USA18X
265 bool "USB Keyspan USA-18X Firmware"
266 depends on USB_SERIAL_KEYSPAN
268 Say Y here to include firmware for the USA-18X converter.
270 config USB_SERIAL_KEYSPAN_USA19W
271 bool "USB Keyspan USA-19W Firmware"
272 depends on USB_SERIAL_KEYSPAN
274 Say Y here to include firmware for the USA-19W converter.
276 config USB_SERIAL_KEYSPAN_USA19QW
277 bool "USB Keyspan USA-19QW Firmware"
278 depends on USB_SERIAL_KEYSPAN
280 Say Y here to include firmware for the USA-19QW converter.
282 config USB_SERIAL_KEYSPAN_USA19QI
283 bool "USB Keyspan USA-19QI Firmware"
284 depends on USB_SERIAL_KEYSPAN
286 Say Y here to include firmware for the USA-19QI converter.
288 config USB_SERIAL_KEYSPAN_USA49W
289 bool "USB Keyspan USA-49W Firmware"
290 depends on USB_SERIAL_KEYSPAN
292 Say Y here to include firmware for the USA-49W converter.
294 config USB_SERIAL_KEYSPAN_USA49WLC
295 bool "USB Keyspan USA-49WLC Firmware"
296 depends on USB_SERIAL_KEYSPAN
298 Say Y here to include firmware for the USA-49WLC converter.
300 config USB_SERIAL_KLSI
301 tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
302 depends on USB_SERIAL && EXPERIMENTAL
304 Say Y here if you want to use a KL5KUSB105 - based single port
305 serial adapter. The most widely known -- and currently the only
306 tested -- device in this category is the PalmConnect USB Serial
307 adapter sold by Palm Inc. for use with their Palm III and Palm V
310 Please read <file:Documentation/usb/usb-serial.txt> for more
313 To compile this driver as a module, choose M here: the
314 module will be called kl5kusb105.
316 config USB_SERIAL_KOBIL_SCT
317 tristate "USB KOBIL chipcard reader"
318 depends on USB_SERIAL
320 Say Y here if you want to use one of the following KOBIL USB chipcard
326 - SecOVID Reader Plus
330 Note that you need a current CT-API.
331 To compile this driver as a module, choose M here: the
332 module will be called kobil_sct.
334 config USB_SERIAL_MCT_U232
335 tristate "USB MCT Single Port Serial Driver"
336 depends on USB_SERIAL
338 Say Y here if you want to use a USB Serial single port adapter from
339 Magic Control Technology Corp. (U232 is one of the model numbers).
341 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
344 To compile this driver as a module, choose M here: the
345 module will be called mct_u232.
347 config USB_SERIAL_PL2303
348 tristate "USB Prolific 2303 Single Port Serial Driver"
349 depends on USB_SERIAL
351 Say Y here if you want to use the PL2303 USB Serial single port
352 adapter from Prolific.
354 To compile this driver as a module, choose M here: the
355 module will be called pl2303.
357 config USB_SERIAL_SAFE
358 tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
359 depends on USB_SERIAL && EXPERIMENTAL
361 config USB_SERIAL_SAFE_PADDED
362 bool "USB Secure Encapsulated Driver - Padded"
363 depends on USB_SERIAL_SAFE
365 config USB_SERIAL_CYBERJACK
366 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
367 depends on USB_SERIAL && EXPERIMENTAL
369 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
370 reader. This is an interface to ISO 7816 compatible contactbased
371 chipcards, e.g. GSM SIMs.
373 To compile this driver as a module, choose M here: the
374 module will be called cyberjack.
378 config USB_SERIAL_XIRCOM
379 tristate "USB Xircom / Entregra Single Port Serial Driver"
380 depends on USB_SERIAL
382 Say Y here if you want to use a Xircom or Entregra single port USB to
383 serial converter device. This driver makes use of firmware
384 developed from scratch by Brian Warner.
386 To compile this driver as a module, choose M here: the
387 module will be called keyspan_pda.
389 config USB_SERIAL_OMNINET
390 tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
391 depends on USB_SERIAL && EXPERIMENTAL
393 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
395 To compile this driver as a module, choose M here: the
396 module will be called omninet.
400 depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT