2 * USB HandSpring Visor, Palm m50x, and Sony Clie driver
3 * (supports all of the Palm OS USB devices)
5 * Copyright (C) 1999 - 2004
6 * Greg Kroah-Hartman (greg@kroah.com)
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * See Documentation/usb/usb-serial.txt for more information on using this driver
15 * (06/03/2003) Judd Montgomery <judd at jpilot.org>
16 * Added support for module parameter options for untested/unknown
20 * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
21 * <brachtl@redgrep.cz> for the information.
24 * Think Treo support is now working.
27 * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
28 * <hiro@zob.ne.jp> for the information.
31 * Removed assumptions that port->tty was always valid (is not true
32 * for usb serial console devices.)
35 * Added support for the Palm i705 device, thanks to Thomas Riemer
36 * <tom@netmech.com> for the information.
39 * Added support for the Palm m130 device, thanks to Udo Eisenbarth
40 * <udo.eisenbarth@web.de> for the information.
43 * Reworked the urb handling logic. We have no more pool, but dynamically
44 * allocate the urb and the transfer buffer on the fly. In testing this
45 * does not incure any measurable overhead. This also relies on the fact
46 * that we have proper reference counting logic for urbs.
49 * Added initial support for the Palm m515 devices.
52 * Added support for the Clie S-360 device.
55 * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
59 * Added support for the m125 devices, and added check to prevent oopses
60 * for CliƩ devices that lie about the number of ports they have.
63 * Added support for the Clie devices, both the 3.5 and 4.0 os versions.
64 * Many thanks to Daniel Burke, and Bryan Payne for helping with this.
67 * fixed a few potential bugs pointed out by Oliver Neukum.
70 * switched from using spinlock to a semaphore, which fixes lots of problems.
73 * Added initial support for the Palm m500 and Palm m505 devices.
76 * Identify version on module load.
79 * Added write_room and chars_in_buffer, as they were previously using the
80 * generic driver versions which is all wrong now that we are using an urb
81 * pool. Thanks to Wolfgang Grandegger for pointing this out to me.
82 * Removed count assignment in the write function, which was not needed anymore
83 * either. Thanks to Al Borchers for pointing this out.
86 * Moved MOD_DEC to end of visor_close to be nicer, as the final write
90 * Fixed bug with data being dropped on the floor by forcing tty->low_latency
91 * to be on. Hopefully this fixes the OHCI issue!
93 * (11/01/2000) Adam J. Richter
94 * usb_device_id table support
97 * Fixed bug with urb->dev not being set properly, now that the usb
101 * Got rid of always calling kmalloc for every urb we wrote out to the
103 * Added visor_read_callback so we can keep track of bytes in and out for
104 * those people who like to know the speed of their device.
105 * Removed DEBUG #ifdefs with call to usb_serial_debug_data
108 * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
109 * the host controller drivers set urb->dev = NULL when the urb is finished.
112 * Added locks for SMP safeness.
115 * Fixed endian problem in visor_startup.
116 * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
120 * Added pool of write urbs to speed up transfers to the visor.
123 * Added module_init and module_exit functions to handle the fact that this
124 * driver is a loadable module now.
127 * Added visor_set_ioctl and visor_set_termios functions (they don't do much
128 * of anything, but are good for debugging.)
131 * Fixed bug in visor_unthrottle that should help with the disconnect in PPP
132 * bug that people have been reporting.
135 * Cleaned up debugging statements in a quest to find UHCI timeout bug.
137 * (04/27/2000) Ryan VanderBijl
138 * Fixed memory leak in visor_close
141 * Split driver up into device specific pieces.
145 #include <linux/config.h>
146 #include <linux/kernel.h>
147 #include <linux/errno.h>
148 #include <linux/init.h>
149 #include <linux/slab.h>
150 #include <linux/tty.h>
151 #include <linux/tty_driver.h>
152 #include <linux/tty_flip.h>
153 #include <linux/module.h>
154 #include <linux/moduleparam.h>
155 #include <linux/spinlock.h>
156 #include <asm/uaccess.h>
157 #include <linux/usb.h>
158 #include "usb-serial.h"
162 * Version Information
164 #define DRIVER_VERSION "v2.1"
165 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
166 #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
168 /* function prototypes for a handspring visor */
169 static int visor_open (struct usb_serial_port *port, struct file *filp);
170 static void visor_close (struct usb_serial_port *port, struct file *filp);
171 static int visor_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
172 static int visor_write_room (struct usb_serial_port *port);
173 static int visor_chars_in_buffer (struct usb_serial_port *port);
174 static void visor_throttle (struct usb_serial_port *port);
175 static void visor_unthrottle (struct usb_serial_port *port);
176 static int visor_probe (struct usb_serial *serial, const struct usb_device_id *id);
177 static int visor_calc_num_ports(struct usb_serial *serial);
178 static void visor_shutdown (struct usb_serial *serial);
179 static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
180 static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios);
181 static void visor_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
182 static void visor_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
183 static void visor_read_int_callback (struct urb *urb, struct pt_regs *regs);
184 static int clie_3_5_startup (struct usb_serial *serial);
185 static int treo_attach (struct usb_serial *serial);
186 static int clie_5_attach (struct usb_serial *serial);
187 static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id);
188 static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id);
190 /* Parameters that may be passed into the module. */
193 static __u16 product;
195 static struct usb_device_id id_table [] = {
196 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID),
197 .driver_info = (kernel_ulong_t)&palm_os_3_probe },
198 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID),
199 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
200 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
201 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
202 { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
203 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
204 { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
205 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
206 { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID),
207 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
208 { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID),
209 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
210 { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID),
211 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
212 { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID),
213 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
214 { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID),
215 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
216 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID),
217 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
218 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID),
219 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
220 { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE31_ID),
221 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
222 { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID),
223 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
224 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID),
225 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
226 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID),
227 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
228 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID),
229 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
230 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID),
231 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
232 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID),
233 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
234 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID),
235 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
236 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID),
237 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
238 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID),
239 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
240 { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID),
241 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
242 { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID),
243 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
244 { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID),
245 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
246 { }, /* optional parameter entry */
247 { } /* Terminating entry */
250 static struct usb_device_id clie_id_5_table [] = {
251 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID),
252 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
253 { }, /* optional parameter entry */
254 { } /* Terminating entry */
257 static struct usb_device_id clie_id_3_5_table [] = {
258 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
259 { } /* Terminating entry */
262 static struct usb_device_id id_table_combined [] = {
263 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
264 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
265 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
266 { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
267 { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
268 { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
269 { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) },
270 { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID) },
271 { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
272 { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) },
273 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) },
274 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) },
275 { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE31_ID) },
276 { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) },
277 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
278 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
279 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) },
280 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) },
281 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) },
282 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) },
283 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID) },
284 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID) },
285 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID) },
286 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID) },
287 { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID) },
288 { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) },
289 { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) },
290 { }, /* optional parameter entry */
291 { } /* Terminating entry */
294 MODULE_DEVICE_TABLE (usb, id_table_combined);
296 static struct usb_driver visor_driver = {
297 .owner = THIS_MODULE,
299 .probe = usb_serial_probe,
300 .disconnect = usb_serial_disconnect,
301 .id_table = id_table_combined,
304 /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */
305 static struct usb_serial_device_type handspring_device = {
306 .owner = THIS_MODULE,
307 .name = "Handspring Visor / Palm OS",
308 .short_name = "visor",
309 .id_table = id_table,
310 .num_interrupt_in = NUM_DONT_CARE,
315 .close = visor_close,
316 .throttle = visor_throttle,
317 .unthrottle = visor_unthrottle,
318 .attach = treo_attach,
319 .probe = visor_probe,
320 .calc_num_ports = visor_calc_num_ports,
321 .shutdown = visor_shutdown,
322 .ioctl = visor_ioctl,
323 .set_termios = visor_set_termios,
324 .write = visor_write,
325 .write_room = visor_write_room,
326 .chars_in_buffer = visor_chars_in_buffer,
327 .write_bulk_callback = visor_write_bulk_callback,
328 .read_bulk_callback = visor_read_bulk_callback,
329 .read_int_callback = visor_read_int_callback,
332 /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */
333 static struct usb_serial_device_type clie_5_device = {
334 .owner = THIS_MODULE,
335 .name = "Sony Clie 5.0",
336 .short_name = "clie_5",
337 .id_table = clie_id_5_table,
338 .num_interrupt_in = NUM_DONT_CARE,
343 .close = visor_close,
344 .throttle = visor_throttle,
345 .unthrottle = visor_unthrottle,
346 .attach = clie_5_attach,
347 .probe = visor_probe,
348 .calc_num_ports = visor_calc_num_ports,
349 .shutdown = visor_shutdown,
350 .ioctl = visor_ioctl,
351 .set_termios = visor_set_termios,
352 .write = visor_write,
353 .write_room = visor_write_room,
354 .chars_in_buffer = visor_chars_in_buffer,
355 .write_bulk_callback = visor_write_bulk_callback,
356 .read_bulk_callback = visor_read_bulk_callback,
357 .read_int_callback = visor_read_int_callback,
360 /* device info for the Sony Clie OS version 3.5 */
361 static struct usb_serial_device_type clie_3_5_device = {
362 .owner = THIS_MODULE,
363 .name = "Sony Clie 3.5",
364 .short_name = "clie_3.5",
365 .id_table = clie_id_3_5_table,
366 .num_interrupt_in = 0,
371 .close = visor_close,
372 .throttle = visor_throttle,
373 .unthrottle = visor_unthrottle,
374 .attach = clie_3_5_startup,
375 .ioctl = visor_ioctl,
376 .set_termios = visor_set_termios,
377 .write = visor_write,
378 .write_room = visor_write_room,
379 .chars_in_buffer = visor_chars_in_buffer,
380 .write_bulk_callback = visor_write_bulk_callback,
381 .read_bulk_callback = visor_read_bulk_callback,
386 static int bytes_out;
389 /******************************************************************************
390 * Handspring Visor specific driver functions
391 ******************************************************************************/
392 static int visor_open (struct usb_serial_port *port, struct file *filp)
394 struct usb_serial *serial = port->serial;
397 dbg("%s - port %d", __FUNCTION__, port->number);
399 if (!port->read_urb) {
400 /* this is needed for some brain dead Sony devices */
401 dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n");
409 * Force low_latency on so that our tty_push actually forces the data
410 * through, otherwise it is scheduled, and with high data rates (like
411 * with OHCI) data can get lost.
414 port->tty->low_latency = 1;
416 /* Start reading from the device */
417 usb_fill_bulk_urb (port->read_urb, serial->dev,
418 usb_rcvbulkpipe (serial->dev,
419 port->bulk_in_endpointAddress),
420 port->read_urb->transfer_buffer,
421 port->read_urb->transfer_buffer_length,
422 visor_read_bulk_callback, port);
423 result = usb_submit_urb(port->read_urb, GFP_KERNEL);
425 dev_err(&port->dev, "%s - failed submitting read urb, error %d\n",
426 __FUNCTION__, result);
430 if (port->interrupt_in_urb) {
431 dbg("%s - adding interrupt input for treo", __FUNCTION__);
432 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
434 dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n",
435 __FUNCTION__, result);
442 static void visor_close (struct usb_serial_port *port, struct file * filp)
444 unsigned char *transfer_buffer;
446 dbg("%s - port %d", __FUNCTION__, port->number);
448 /* shutdown our urbs */
449 usb_unlink_urb (port->read_urb);
450 if (port->interrupt_in_urb)
451 usb_unlink_urb (port->interrupt_in_urb);
453 /* Try to send shutdown message, if the device is gone, this will just fail. */
454 transfer_buffer = kmalloc (0x12, GFP_KERNEL);
455 if (transfer_buffer) {
456 usb_control_msg (port->serial->dev,
457 usb_rcvctrlpipe(port->serial->dev, 0),
458 VISOR_CLOSE_NOTIFICATION, 0xc2,
460 transfer_buffer, 0x12, 300);
461 kfree (transfer_buffer);
464 /* Uncomment the following line if you want to see some statistics in your syslog */
465 /* dev_info (&port->dev, "Bytes In = %d Bytes Out = %d\n", bytes_in, bytes_out); */
469 static int visor_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count)
471 struct usb_serial *serial = port->serial;
473 unsigned char *buffer;
476 dbg("%s - port %d", __FUNCTION__, port->number);
478 buffer = kmalloc (count, GFP_ATOMIC);
480 dev_err(&port->dev, "out of memory\n");
484 urb = usb_alloc_urb(0, GFP_ATOMIC);
486 dev_err(&port->dev, "no more free urbs\n");
492 if (copy_from_user (buffer, buf, count)) {
498 memcpy (buffer, buf, count);
501 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer);
503 usb_fill_bulk_urb (urb, serial->dev,
504 usb_sndbulkpipe (serial->dev,
505 port->bulk_out_endpointAddress),
507 visor_write_bulk_callback, port);
509 /* send it down the pipe */
510 status = usb_submit_urb(urb, GFP_ATOMIC);
512 dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n",
513 __FUNCTION__, status);
520 /* we are done with this urb, so let the host driver
521 * really free it when it is finished with it */
528 static int visor_write_room (struct usb_serial_port *port)
530 dbg("%s - port %d", __FUNCTION__, port->number);
533 * We really can take anything the user throws at us
534 * but let's pick a nice big number to tell the tty
535 * layer that we have lots of free space
541 static int visor_chars_in_buffer (struct usb_serial_port *port)
543 dbg("%s - port %d", __FUNCTION__, port->number);
546 * We can't really account for how much data we
547 * have sent out, but hasn't made it through to the
548 * device, so just tell the tty layer that everything
555 static void visor_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
557 struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
559 /* free up the transfer buffer, as usb_free_urb() does not do this */
560 kfree (urb->transfer_buffer);
562 dbg("%s - port %d", __FUNCTION__, port->number);
565 dbg("%s - nonzero write bulk status received: %d",
566 __FUNCTION__, urb->status);
568 schedule_work(&port->work);
572 static void visor_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
574 struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
575 struct tty_struct *tty;
576 unsigned char *data = urb->transfer_buffer;
580 dbg("%s - port %d", __FUNCTION__, port->number);
583 dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
587 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
590 if (tty && urb->actual_length) {
591 for (i = 0; i < urb->actual_length ; ++i) {
592 /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
593 if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
594 tty_flip_buffer_push(tty);
596 /* this doesn't actually push the data through unless tty->low_latency is set */
597 tty_insert_flip_char(tty, data[i], 0);
599 tty_flip_buffer_push(tty);
601 bytes_in += urb->actual_length;
603 /* Continue trying to always read */
604 usb_fill_bulk_urb (port->read_urb, port->serial->dev,
605 usb_rcvbulkpipe(port->serial->dev,
606 port->bulk_in_endpointAddress),
607 port->read_urb->transfer_buffer,
608 port->read_urb->transfer_buffer_length,
609 visor_read_bulk_callback, port);
610 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
612 dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
616 static void visor_read_int_callback (struct urb *urb, struct pt_regs *regs)
618 struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
621 switch (urb->status) {
628 /* this urb is terminated, clean up */
629 dbg("%s - urb shutting down with status: %d",
630 __FUNCTION__, urb->status);
633 dbg("%s - nonzero urb status received: %d",
634 __FUNCTION__, urb->status);
639 * This information is still unknown what it can be used for.
640 * If anyone has an idea, please let the author know...
642 * Rumor has it this endpoint is used to notify when data
643 * is ready to be read from the bulk ones.
645 usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
646 urb->actual_length, urb->transfer_buffer);
649 result = usb_submit_urb (urb, GFP_ATOMIC);
651 dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n",
652 __FUNCTION__, result);
655 static void visor_throttle (struct usb_serial_port *port)
657 dbg("%s - port %d", __FUNCTION__, port->number);
658 usb_unlink_urb (port->read_urb);
662 static void visor_unthrottle (struct usb_serial_port *port)
666 dbg("%s - port %d", __FUNCTION__, port->number);
668 port->read_urb->dev = port->serial->dev;
669 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
671 dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
674 static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id)
676 struct device *dev = &serial->dev->dev;
677 struct visor_connection_info *connection_info;
678 unsigned char *transfer_buffer;
684 dbg("%s", __FUNCTION__);
686 transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL);
687 if (!transfer_buffer) {
688 dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __FUNCTION__,
689 sizeof(*connection_info));
693 /* send a get connection info request */
694 retval = usb_control_msg (serial->dev,
695 usb_rcvctrlpipe(serial->dev, 0),
696 VISOR_GET_CONNECTION_INFORMATION,
697 0xc2, 0x0000, 0x0000, transfer_buffer,
698 sizeof(*connection_info), 300);
700 dev_err(dev, "%s - error %d getting connection information\n",
701 __FUNCTION__, retval);
705 if (retval == sizeof(*connection_info)) {
706 connection_info = (struct visor_connection_info *)transfer_buffer;
708 le16_to_cpus(&connection_info->num_ports);
709 num_ports = connection_info->num_ports;
711 for (i = 0; i < num_ports; ++i) {
712 switch (connection_info->connections[i].port_function_id) {
713 case VISOR_FUNCTION_GENERIC:
716 case VISOR_FUNCTION_DEBUGGER:
719 case VISOR_FUNCTION_HOTSYNC:
722 case VISOR_FUNCTION_CONSOLE:
725 case VISOR_FUNCTION_REMOTE_FILE_SYS:
726 string = "Remote File System";
732 dev_info(dev, "%s: port %d, is for %s use\n",
734 connection_info->connections[i].port, string);
738 * Handle devices that report invalid stuff here.
740 if (num_ports == 0 || num_ports > 2) {
741 dev_warn (dev, "%s: No valid connect info available\n",
746 dev_info(dev, "%s: Number of ports: %d\n", serial->type->name,
750 * save off our num_ports info so that we can use it in the
751 * calc_num_ports callback
753 usb_set_serial_data(serial, (void *)(long)num_ports);
755 /* ask for the number of bytes available, but ignore the response as it is broken */
756 retval = usb_control_msg (serial->dev,
757 usb_rcvctrlpipe(serial->dev, 0),
758 VISOR_REQUEST_BYTES_AVAILABLE,
759 0xc2, 0x0000, 0x0005, transfer_buffer,
762 dev_err(dev, "%s - error %d getting bytes available request\n",
763 __FUNCTION__, retval);
767 kfree (transfer_buffer);
772 static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id)
774 struct device *dev = &serial->dev->dev;
775 struct palm_ext_connection_info *connection_info;
776 unsigned char *transfer_buffer;
779 dbg("%s", __FUNCTION__);
781 transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL);
782 if (!transfer_buffer) {
783 dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __FUNCTION__,
784 sizeof(*connection_info));
788 retval = usb_control_msg (serial->dev,
789 usb_rcvctrlpipe(serial->dev, 0),
790 PALM_GET_EXT_CONNECTION_INFORMATION,
791 0xc2, 0x0000, 0x0000, transfer_buffer,
792 sizeof (*connection_info), 300);
794 dev_err(dev, "%s - error %d getting connection info\n",
795 __FUNCTION__, retval);
797 usb_serial_debug_data(debug, &serial->dev->dev, __FUNCTION__,
798 retval, transfer_buffer);
800 kfree (transfer_buffer);
805 static int visor_probe (struct usb_serial *serial, const struct usb_device_id *id)
808 int (*startup) (struct usb_serial *serial, const struct usb_device_id *id);
810 dbg("%s", __FUNCTION__);
812 if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
813 err("active config #%d != 1 ??",
814 serial->dev->actconfig->desc.bConfigurationValue);
818 if (id->driver_info) {
819 startup = (void *)id->driver_info;
820 retval = startup(serial, id);
826 static int visor_calc_num_ports (struct usb_serial *serial)
828 int num_ports = (int)(long)(usb_get_serial_data(serial));
831 usb_set_serial_data(serial, NULL);
836 static int clie_3_5_startup (struct usb_serial *serial)
838 struct device *dev = &serial->dev->dev;
842 dbg("%s", __FUNCTION__);
845 * Note that PEG-300 series devices expect the following two calls.
848 /* get the config number */
849 result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0),
850 USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
851 0, 0, &data, 1, HZ * 3);
853 dev_err(dev, "%s: get config number failed: %d\n", __FUNCTION__, result);
857 dev_err(dev, "%s: get config number bad return length: %d\n", __FUNCTION__, result);
861 /* get the interface number */
862 result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0),
863 USB_REQ_GET_INTERFACE,
864 USB_DIR_IN | USB_RECIP_INTERFACE,
865 0, 0, &data, 1, HZ * 3);
867 dev_err(dev, "%s: get interface number failed: %d\n", __FUNCTION__, result);
871 dev_err(dev, "%s: get interface number bad return length: %d\n", __FUNCTION__, result);
878 static int treo_attach (struct usb_serial *serial)
880 struct usb_serial_port *swap_port;
882 /* Only do this endpoint hack for the Handspring devices with
883 * interrupt in endpoints, which for now are the Treo devices. */
884 if (!((serial->dev->descriptor.idVendor == HANDSPRING_VENDOR_ID) ||
885 (serial->dev->descriptor.idVendor == KYOCERA_VENDOR_ID)) ||
886 (serial->num_interrupt_in == 0))
889 dbg("%s", __FUNCTION__);
892 * It appears that Treos and Kyoceras want to use the
893 * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
894 * so let's swap the 1st and 2nd bulk in and interrupt endpoints.
895 * Note that swapping the bulk out endpoints would break lots of
896 * apps that want to communicate on the second port.
898 #define COPY_PORT(dest, src) \
899 dest->read_urb = src->read_urb; \
900 dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress; \
901 dest->bulk_in_buffer = src->bulk_in_buffer; \
902 dest->interrupt_in_urb = src->interrupt_in_urb; \
903 dest->interrupt_in_endpointAddress = src->interrupt_in_endpointAddress; \
904 dest->interrupt_in_buffer = src->interrupt_in_buffer;
906 swap_port = kmalloc(sizeof(*swap_port), GFP_KERNEL);
909 COPY_PORT(swap_port, serial->port[0]);
910 COPY_PORT(serial->port[0], serial->port[1]);
911 COPY_PORT(serial->port[1], swap_port);
917 static int clie_5_attach (struct usb_serial *serial)
919 dbg("%s", __FUNCTION__);
921 /* TH55 registers 2 ports.
922 Communication in from the UX50/TH55 uses bulk_in_endpointAddress from port 0
923 Communication out to the UX50/TH55 uses bulk_out_endpointAddress from port 1
925 Lets do a quick and dirty mapping
928 /* some sanity check */
929 if (serial->num_ports < 2)
932 /* port 0 now uses the modified endpoint Address */
933 serial->port[0]->bulk_out_endpointAddress = serial->port[1]->bulk_out_endpointAddress;
938 static void visor_shutdown (struct usb_serial *serial)
940 dbg("%s", __FUNCTION__);
943 static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
945 dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
951 /* This function is all nice and good, but we don't change anything based on it :) */
952 static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios)
956 dbg("%s - port %d", __FUNCTION__, port->number);
958 if ((!port->tty) || (!port->tty->termios)) {
959 dbg("%s - no tty structures", __FUNCTION__);
963 cflag = port->tty->termios->c_cflag;
964 /* check that they really want us to change something */
966 if ((cflag == old_termios->c_cflag) &&
967 (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) {
968 dbg("%s - nothing to change...", __FUNCTION__);
973 /* get the byte size */
974 switch (cflag & CSIZE) {
975 case CS5: dbg("%s - data bits = 5", __FUNCTION__); break;
976 case CS6: dbg("%s - data bits = 6", __FUNCTION__); break;
977 case CS7: dbg("%s - data bits = 7", __FUNCTION__); break;
979 case CS8: dbg("%s - data bits = 8", __FUNCTION__); break;
982 /* determine the parity */
985 dbg("%s - parity = odd", __FUNCTION__);
987 dbg("%s - parity = even", __FUNCTION__);
989 dbg("%s - parity = none", __FUNCTION__);
991 /* figure out the stop bits requested */
993 dbg("%s - stop bits = 2", __FUNCTION__);
995 dbg("%s - stop bits = 1", __FUNCTION__);
998 /* figure out the flow control settings */
1000 dbg("%s - RTS/CTS is enabled", __FUNCTION__);
1002 dbg("%s - RTS/CTS is disabled", __FUNCTION__);
1004 /* determine software flow control */
1005 if (I_IXOFF(port->tty))
1006 dbg("%s - XON/XOFF is enabled, XON = %2x, XOFF = %2x",
1007 __FUNCTION__, START_CHAR(port->tty), STOP_CHAR(port->tty));
1009 dbg("%s - XON/XOFF is disabled", __FUNCTION__);
1011 /* get the baud rate wanted */
1012 dbg("%s - baud rate = %d", __FUNCTION__, tty_get_baud_rate(port->tty));
1018 static int __init visor_init (void)
1021 /* Only if parameters were passed to us */
1022 if ((vendor>0) && (product>0)) {
1023 struct usb_device_id usb_dev_temp[]=
1024 {{USB_DEVICE(vendor, product),
1025 .driver_info = (kernel_ulong_t)&palm_os_4_probe }};
1027 /* Find the last entry in id_table */
1029 if (id_table[i].idVendor==0) {
1030 id_table[i] = usb_dev_temp[0];
1034 /* Find the last entry in id_table_combined */
1036 if (id_table_combined[i].idVendor==0) {
1037 id_table_combined[i] = usb_dev_temp[0];
1041 info("Untested USB device specified at time of module insertion");
1042 info("Warning: This is not guaranteed to work");
1043 info("Using a newer kernel is preferred to this method");
1044 info("Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x",
1047 retval = usb_serial_register(&handspring_device);
1049 goto failed_handspring_register;
1050 retval = usb_serial_register(&clie_3_5_device);
1052 goto failed_clie_3_5_register;
1053 retval = usb_serial_register(&clie_5_device);
1055 goto failed_clie_5_register;
1056 retval = usb_register(&visor_driver);
1058 goto failed_usb_register;
1059 info(DRIVER_DESC " " DRIVER_VERSION);
1062 failed_usb_register:
1063 usb_serial_deregister(&clie_5_device);
1064 failed_clie_5_register:
1065 usb_serial_deregister(&clie_3_5_device);
1066 failed_clie_3_5_register:
1067 usb_serial_deregister(&handspring_device);
1068 failed_handspring_register:
1073 static void __exit visor_exit (void)
1075 usb_deregister (&visor_driver);
1076 usb_serial_deregister (&handspring_device);
1077 usb_serial_deregister (&clie_3_5_device);
1078 usb_serial_deregister (&clie_5_device);
1082 module_init(visor_init);
1083 module_exit(visor_exit);
1085 MODULE_AUTHOR( DRIVER_AUTHOR );
1086 MODULE_DESCRIPTION( DRIVER_DESC );
1087 MODULE_LICENSE("GPL");
1089 module_param(debug, bool, S_IRUGO | S_IWUSR);
1090 MODULE_PARM_DESC(debug, "Debug enabled or not");
1092 module_param(vendor, ushort, 0);
1093 MODULE_PARM_DESC(vendor, "User specified vendor ID");
1094 module_param(product, ushort, 0);
1095 MODULE_PARM_DESC(product, "User specified product ID");