2 # File system configuration
8 tristate "Second extended fs support"
10 Ext2 is a standard Linux file system for hard disks.
12 To compile this file system support as a module, choose M here: the
13 module will be called ext2. Be aware however that the file system
14 of your root partition (the one containing the directory /) cannot
15 be compiled as a module, and so this could be dangerous.
20 bool "Ext2 extended attributes"
23 Extended attributes are name:value pairs associated with inodes by
24 the kernel or by users (see the attr(5) manual page, or visit
25 <http://acl.bestbits.at/> for details).
29 config EXT2_FS_POSIX_ACL
30 bool "Ext2 POSIX Access Control Lists"
31 depends on EXT2_FS_XATTR
33 Posix Access Control Lists (ACLs) support permissions for users and
34 groups beyond the owner/group/world scheme.
36 To learn more about Access Control Lists, visit the Posix ACLs for
37 Linux website <http://acl.bestbits.at/>.
39 If you don't know what Access Control Lists are, say N
41 config EXT2_FS_SECURITY
42 bool "Ext2 Security Labels"
43 depends on EXT2_FS_XATTR
45 Security labels support alternative access control models
46 implemented by security modules like SELinux. This option
47 enables an extended attribute handler for file security
48 labels in the ext2 filesystem.
50 If you are not using a security module that requires using
51 extended attributes for file security labels, say N.
54 tristate "Ext3 journalling file system support"
56 This is the journaling version of the Second extended file system
57 (often called ext3), the de facto standard Linux file system
58 (method to organize files on a storage device) for hard disks.
60 The journaling code included in this driver means you do not have
61 to run e2fsck (file system checker) on your file systems after a
62 crash. The journal keeps track of any changes that were being made
63 at the time the system crashed, and can ensure that your file system
64 is consistent without the need for a lengthy check.
66 Other than adding the journal to the file system, the on-disk format
67 of ext3 is identical to ext2. It is possible to freely switch
68 between using the ext3 driver and the ext2 driver, as long as the
69 file system has been cleanly unmounted, or e2fsck is run on the file
72 To add a journal on an existing ext2 file system or change the
73 behavior of ext3 file systems, you can use the tune2fs utility ("man
74 tune2fs"). To modify attributes of files and directories on ext3
75 file systems, use chattr ("man chattr"). You need to be using
76 e2fsprogs version 1.20 or later in order to create ext3 journals
77 (available at <http://sourceforge.net/projects/e2fsprogs/>).
79 To compile this file system support as a module, choose M here: the
80 module will be called ext3. Be aware however that the file system
81 of your root partition (the one containing the directory /) cannot
82 be compiled as a module, and so this may be dangerous.
85 bool "Ext3 extended attributes"
89 Extended attributes are name:value pairs associated with inodes by
90 the kernel or by users (see the attr(5) manual page, or visit
91 <http://acl.bestbits.at/> for details).
95 You need this for POSIX ACL support on ext3.
97 config EXT3_FS_POSIX_ACL
98 bool "Ext3 POSIX Access Control Lists"
99 depends on EXT3_FS_XATTR
101 Posix Access Control Lists (ACLs) support permissions for users and
102 groups beyond the owner/group/world scheme.
104 To learn more about Access Control Lists, visit the Posix ACLs for
105 Linux website <http://acl.bestbits.at/>.
107 If you don't know what Access Control Lists are, say N
109 config EXT3_FS_SECURITY
110 bool "Ext3 Security Labels"
111 depends on EXT3_FS_XATTR
113 Security labels support alternative access control models
114 implemented by security modules like SELinux. This option
115 enables an extended attribute handler for file security
116 labels in the ext3 filesystem.
118 If you are not using a security module that requires using
119 extended attributes for file security labels, say N.
122 # CONFIG_JBD could be its own option (even modular), but until there are
123 # other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS
124 # dep_tristate ' Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS
128 This is a generic journaling layer for block devices. It is
129 currently used by the ext3 file system, but it could also be used to
130 add journal support to other file systems or block devices such as
133 If you are using the ext3 file system, you need to say Y here. If
134 you are not using ext3 then you will probably want to say N.
136 To compile this device as a module, choose M here: the module will be
137 called jbd. If you are compiling ext3 into the kernel, you cannot
138 compile this code as a module.
141 bool "JBD (ext3) debugging support"
144 If you are using the ext3 journaled file system (or potentially any
145 other file system/device using JBD), this option allows you to
146 enable debugging output while the system is running, in order to
147 help track down any problems you are having. By default the
148 debugging output will be turned off.
150 If you select Y here, then you will be able to turn on debugging
151 with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
152 1 and 5, the higher the number, the more debugging output is
153 generated. To turn debugging off again, do
154 "echo 0 > /proc/sys/fs/jbd-debug".
157 # Meta block cache for Extended Attributes (ext2/ext3)
159 depends on EXT2_FS_XATTR || EXT3_FS_XATTR
160 default y if EXT2_FS=y || EXT3_FS=y
161 default m if EXT2_FS=m || EXT3_FS=m
164 tristate "Reiserfs support"
166 Stores not just filenames but the files themselves in a balanced
167 tree. Uses journaling.
169 Balanced trees are more efficient than traditional file system
170 architectural foundations.
172 In general, ReiserFS is as fast as ext2, but is very efficient with
173 large directories and small files. Additional patches are needed
174 for NFS and quotas, please see <http://www.namesys.com/> for links.
176 It is more easily extended to have features currently found in
177 database and keyword search systems than block allocation based file
178 systems are. The next version will be so extended, and will support
179 plugins consistent with our motto ``It takes more than a license to
180 make source code open.''
182 Read <http://www.namesys.com/> to learn more about reiserfs.
184 Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
186 If you like it, you can pay us to add new features to it that you
187 need, buy a support contract, or pay us to port it to another OS.
189 config REISERFS_CHECK
190 bool "Enable reiserfs debug mode"
191 depends on REISERFS_FS
193 If you set this to Y, then ReiserFS will perform every check it can
194 possibly imagine of its internal consistency throughout its
195 operation. It will also go substantially slower. More than once we
196 have forgotten that this was on, and then gone despondent over the
197 latest benchmarks.:-) Use of this option allows our team to go all
198 out in checking for consistency when debugging without fear of its
199 effect on end users. If you are on the verge of sending in a bug
200 report, say Y and you might get a useful error message. Almost
201 everyone should say N.
203 config REISERFS_PROC_INFO
204 bool "Stats in /proc/fs/reiserfs"
205 depends on REISERFS_FS
207 Create under /proc/fs/reiserfs a hierarchy of files, displaying
208 various ReiserFS statistics and internal data at the expense of
209 making your kernel or module slightly larger (+8 KB). This also
210 increases the amount of kernel memory required for each mount.
211 Almost everyone but ReiserFS developers and people fine-tuning
212 reiserfs or tracing problems should say N.
214 config REISERFS_FS_XATTR
215 bool "ReiserFS extended attributes"
216 depends on REISERFS_FS
218 Extended attributes are name:value pairs associated with inodes by
219 the kernel or by users (see the attr(5) manual page, or visit
220 <http://acl.bestbits.at/> for details).
224 config REISERFS_FS_POSIX_ACL
225 bool "ReiserFS POSIX Access Control Lists"
226 depends on REISERFS_FS_XATTR
228 Posix Access Control Lists (ACLs) support permissions for users and
229 groups beyond the owner/group/world scheme.
231 To learn more about Access Control Lists, visit the Posix ACLs for
232 Linux website <http://acl.bestbits.at/>.
234 If you don't know what Access Control Lists are, say N
236 config REISERFS_FS_SECURITY
237 bool "ReiserFS Security Labels"
238 depends on REISERFS_FS_XATTR
240 Security labels support alternative access control models
241 implemented by security modules like SELinux. This option
242 enables an extended attribute handler for file security
243 labels in the ReiserFS filesystem.
245 If you are not using a security module that requires using
246 extended attributes for file security labels, say N.
249 tristate "JFS filesystem support"
252 This is a port of IBM's Journaled Filesystem . More information is
253 available in the file Documentation/filesystems/jfs.txt.
255 If you do not intend to use the JFS filesystem, say N.
258 bool "JFS POSIX Access Control Lists"
261 Posix Access Control Lists (ACLs) support permissions for users and
262 groups beyond the owner/group/world scheme.
264 To learn more about Access Control Lists, visit the Posix ACLs for
265 Linux website <http://acl.bestbits.at/>.
267 If you don't know what Access Control Lists are, say N
273 If you are experiencing any problems with the JFS filesystem, say
274 Y here. This will result in additional debugging messages to be
275 written to the system log. Under normal circumstances, this
276 results in very little overhead.
278 config JFS_STATISTICS
279 bool "JFS statistics"
282 Enabling this option will cause statistics from the JFS file system
283 to be made available to the user in the /proc/fs/jfs/ directory.
286 # Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs)
288 # NOTE: you can implement Posix ACLs without these helpers (XFS does).
289 # Never use this symbol for ifdefs.
292 depends on EXT2_FS_POSIX_ACL || EXT3_FS_POSIX_ACL || JFS_POSIX_ACL || REISERFS_FS_POSIX_ACL || NFSD_V4
296 tristate "XFS filesystem support"
298 XFS is a high performance journaling filesystem which originated
299 on the SGI IRIX platform. It is completely multi-threaded, can
300 support large files and large filesystems, extended attributes,
301 variable block sizes, is extent based, and makes extensive use of
302 Btrees (directories, extents, free space) to aid both performance
305 Refer to the documentation at <http://oss.sgi.com/projects/xfs/>
306 for complete details. This implementation is on-disk compatible
307 with the IRIX version of XFS.
309 To compile this file system support as a module, choose M here: the
310 module will be called xfs. Be aware, however, that if the file
311 system of your root partition is compiled as a module, you'll need
312 to use an initial ramdisk (initrd) to boot.
315 bool "Realtime support (EXPERIMENTAL)"
316 depends on XFS_FS && EXPERIMENTAL
318 If you say Y here you will be able to mount and use XFS filesystems
319 which contain a realtime subvolume. The realtime subvolume is a
320 separate area of disk space where only file data is stored. The
321 realtime subvolume is designed to provide very deterministic
322 data rates suitable for media streaming applications.
324 See the xfs man page in section 5 for a bit more information.
326 This feature is unsupported at this time, is not yet fully
327 functional, and may cause serious problems.
335 If you say Y here, you will be able to set limits for disk usage on
336 a per user and/or a per group basis under XFS. XFS considers quota
337 information as filesystem metadata and uses journaling to provide a
338 higher level guarantee of consistency. The on-disk data format for
339 quota is also compatible with the IRIX version of XFS, allowing a
340 filesystem to be migrated between Linux and IRIX without any need
343 If unsure, say N. More comprehensive documentation can be found in
344 README.quota in the xfsprogs package. XFS quota can be used either
345 with or without the generic quota support enabled (CONFIG_QUOTA) -
346 they are completely independent subsystems.
349 bool "Security Label support"
352 Security labels support alternative access control models
353 implemented by security modules like SELinux. This option
354 enables an extended attribute namespace for inode security
355 labels in the XFS filesystem.
357 If you are not using a security module that requires using
358 extended attributes for inode security labels, say N.
361 bool "POSIX ACL support"
364 POSIX Access Control Lists (ACLs) support permissions for users and
365 groups beyond the owner/group/world scheme.
367 To learn more about Access Control Lists, visit the POSIX ACLs for
368 Linux website <http://acl.bestbits.at/>.
370 If you don't know what Access Control Lists are, say N.
373 tristate "Minix fs support"
375 Minix is a simple operating system used in many classes about OS's.
376 The minix file system (method to organize files on a hard disk
377 partition or a floppy disk) was the original file system for Linux,
378 but has been superseded by the second extended file system ext2fs.
379 You don't want to use the minix file system on your hard disk
380 because of certain built-in restrictions, but it is sometimes found
381 on older Linux floppy disks. This option will enlarge your kernel
382 by about 28 KB. If unsure, say N.
384 To compile this file system support as a module, choose M here: the
385 module will be called minix. Note that the file system of your root
386 partition (the one containing the directory /) cannot be compiled as
390 tristate "ROM file system support"
392 This is a very small read-only file system mainly intended for
393 initial ram disks of installation disks, but it could be used for
394 other read-only media as well. Read
395 <file:Documentation/filesystems/romfs.txt> for details.
397 To compile this file system support as a module, choose M here: the
398 module will be called romfs. Note that the file system of your
399 root partition (the one containing the directory /) cannot be a
402 If you don't know whether you need it, then you don't need it:
408 If you say Y here, you will be able to set per user limits for disk
409 usage (also called disk quotas). Currently, it works for the
410 ext2, ext3, and reiserfs file system. ext3 also supports journalled
411 quotas for which you don't need to run quotacheck(8) after an unclean
412 shutdown. You need additional software in order to use quota support
413 (you can download sources from
414 <http://www.sf.net/projects/linuxquota/>). For further details, read
415 the Quota mini-HOWTO, available from
416 <http://www.tldp.org/docs.html#howto>, or the documentation provided
417 with the quota tools. Probably the quota support is only useful for
418 multi user systems. If unsure, say N.
421 tristate "Old quota format support"
424 This quota format was (is) used by kernels earlier than 2.4.22. If
425 you have quota working and you don't want to convert to new quota
429 tristate "Quota format v2 support"
432 This quota format allows using quotas with 32-bit UIDs/GIDs. If you
433 need this functionality say Y here. Note that you will need recent
434 quota utilities (>= 3.01) for new quota format with this kernel.
438 depends on XFS_QUOTA || QUOTA
442 tristate "Kernel automounter support"
444 The automounter is a tool to automatically mount remote file systems
445 on demand. This implementation is partially kernel-based to reduce
446 overhead in the already-mounted case; this is unlike the BSD
447 automounter (amd), which is a pure user space daemon.
449 To use the automounter you need the user-space tools from the autofs
450 package; you can find the location in <file:Documentation/Changes>.
451 You also want to answer Y to "NFS file system support", below.
453 If you want to use the newer version of the automounter with more
454 features, say N here and say Y to "Kernel automounter v4 support",
457 To compile this support as a module, choose M here: the module will be
460 If you are not a part of a fairly large, distributed network, you
461 probably do not need an automounter, and can say N here.
464 tristate "Kernel automounter version 4 support (also supports v3)"
466 The automounter is a tool to automatically mount remote file systems
467 on demand. This implementation is partially kernel-based to reduce
468 overhead in the already-mounted case; this is unlike the BSD
469 automounter (amd), which is a pure user space daemon.
471 To use the automounter you need the user-space tools from
472 <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
473 want to answer Y to "NFS file system support", below.
475 To compile this support as a module, choose M here: the module will be
476 called autofs4. You will need to add "alias autofs autofs4" to your
477 modules configuration file.
479 If you are not a part of a fairly large, distributed network or
480 don't have a laptop which needs to dynamically reconfigure to the
481 local network, you probably do not need an automounter, and can say
484 menu "CD-ROM/DVD Filesystems"
487 tristate "ISO 9660 CDROM file system support"
489 This is the standard file system used on CD-ROMs. It was previously
490 known as "High Sierra File System" and is called "hsfs" on other
491 Unix systems. The so-called Rock-Ridge extensions which allow for
492 long Unix filenames and symbolic links are also supported by this
493 driver. If you have a CD-ROM drive and want to do more with it than
494 just listen to audio CDs and watch its LEDs, say Y (and read
495 <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
496 available from <http://www.tldp.org/docs.html#howto>), thereby
497 enlarging your kernel by about 27 KB; otherwise say N.
499 To compile this file system support as a module, choose M here: the
500 module will be called isofs.
503 bool "Microsoft Joliet CDROM extensions"
504 depends on ISO9660_FS
507 Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
508 which allows for long filenames in unicode format (unicode is the
509 new 16 bit character code, successor to ASCII, which encodes the
510 characters of almost all languages of the world; see
511 <http://www.unicode.org/> for more information). Say Y here if you
512 want to be able to read Joliet CD-ROMs under Linux.
515 bool "Transparent decompression extension"
516 depends on ISO9660_FS
519 This is a Linux-specific extension to RockRidge which lets you store
520 data in compressed form on a CD-ROM and have it transparently
521 decompressed when the CD-ROM is accessed. See
522 <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
523 necessary to create such a filesystem. Say Y here if you want to be
524 able to read such compressed CD-ROMs.
527 # for fs/nls/Config.in
533 tristate "UDF file system support"
535 This is the new file system used on some CD-ROMs and DVDs. Say Y if
536 you intend to mount DVD discs or CDRW's written in packet mode, or
537 if written to by other UDF utilities, such as DirectCD.
538 Please read <file:Documentation/filesystems/udf.txt>.
540 To compile this file system support as a module, choose M here: the
541 module will be called udf.
548 depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
552 menu "DOS/FAT/NT Filesystems"
558 If you want to use one of the FAT-based file systems (the MS-DOS,
559 VFAT (Windows 95) and UMSDOS (used to run Linux on top of an
560 ordinary DOS partition) file systems), then you must say Y or M here
561 to include FAT support. You will then be able to mount partitions or
562 diskettes with FAT-based file systems and transparently access the
563 files on them, i.e. MSDOS files will look and behave just like all
566 This FAT support is not a file system in itself, it only provides
567 the foundation for the other file systems. You will have to say Y or
568 M to at least one of "MSDOS fs support" or "VFAT fs support" in
569 order to make use of it.
571 Another way to read and write MSDOS floppies and hard drive
572 partitions from within Linux (but not transparently) is with the
573 mtools ("man mtools") program suite. You don't need to say Y here in
576 If you need to move large files on floppies between a DOS and a
577 Linux box, say Y here, mount the floppy under Linux with an MSDOS
578 file system and use GNU tar's M option. GNU tar is a program
579 available for Unix and DOS ("man tar" or "info tar").
581 It is now also becoming possible to read and write compressed FAT
582 file systems; read <file:Documentation/filesystems/fat_cvf.txt> for
585 The FAT support will enlarge your kernel by about 37 KB. If unsure,
588 To compile this as a module, choose M here: the module will be called
589 fat. Note that if you compile the FAT support as a module, you
590 cannot compile any of the FAT-based file systems into the kernel
591 -- they will have to be modules as well.
592 The file system of your root partition (the one containing the
593 directory /) cannot be a module, so don't say M here if you intend
594 to use UMSDOS as your root file system.
597 tristate "MSDOS fs support"
600 This allows you to mount MSDOS partitions of your hard drive (unless
601 they are compressed; to access compressed MSDOS partitions under
602 Linux, you can either use the DOS emulator DOSEMU, described in the
603 DOSEMU-HOWTO, available from
604 <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
605 <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
606 intend to use dosemu with a non-compressed MSDOS partition, say Y
607 here) and MSDOS floppies. This means that file access becomes
608 transparent, i.e. the MSDOS files look and behave just like all
611 If you want to use UMSDOS, the Unix-like file system on top of a
612 DOS file system, which allows you to run Linux from within a DOS
613 partition without repartitioning, you'll have to say Y or M here.
615 If you have Windows 95 or Windows NT installed on your MSDOS
616 partitions, you should use the VFAT file system (say Y to "VFAT fs
617 support" below), or you will not be able to see the long filenames
618 generated by Windows 95 / Windows NT.
620 This option will enlarge your kernel by about 7 KB. If unsure,
621 answer Y. This will only work if you said Y to "DOS FAT fs support"
622 as well. To compile this as a module, choose M here: the module will
626 tristate "VFAT (Windows-95) fs support"
629 This option provides support for normal Windows file systems with
630 long filenames. That includes non-compressed FAT-based file systems
631 used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
632 programs from the mtools package.
634 You cannot use the VFAT file system for your Linux root partition
635 (the one containing the directory /); use UMSDOS instead if you
636 want to run Linux from within a DOS partition (i.e. say Y to
637 "Unix like fs on top of std MSDOS fs", below).
639 The VFAT support enlarges your kernel by about 10 KB and it only
640 works if you said Y to the "DOS FAT fs support" above. Please read
641 the file <file:Documentation/filesystems/vfat.txt> for details. If
644 To compile this as a module, choose M here: the module will be called
647 config FAT_DEFAULT_CODEPAGE
648 int "Default codepage for FAT"
649 depends on MSDOS_FS || VFAT_FS
652 This option should be set to the codepage of your FAT filesystems.
653 It can be overridden with the "codepage" mount option.
654 See <file:Documentation/filesystems/vfat.txt> for more information.
656 config FAT_DEFAULT_IOCHARSET
657 string "Default iocharset for FAT"
661 Set this to the default input/output character set you'd
662 like FAT to use. It should probably match the character set
663 that most of your FAT filesystems use, and can be overridden
664 with the "iocharset" mount option for FAT filesystems.
665 Note that "utf8" is not recommended for FAT filesystems.
666 If unsure, you shouldn't set "utf8" here.
667 See <file:Documentation/filesystems/vfat.txt> for more information.
670 #dep_tristate ' UMSDOS: Unix-like file system on top of standard MSDOS fs' CONFIG_UMSDOS_FS $CONFIG_MSDOS_FS
671 # UMSDOS is temprory broken
674 Say Y here if you want to run Linux from within an existing DOS
675 partition of your hard drive. The advantage of this is that you can
676 get away without repartitioning your hard drive (which often implies
677 backing everything up and restoring afterwards) and hence you're
678 able to quickly try out Linux or show it to your friends; the
679 disadvantage is that Linux becomes susceptible to DOS viruses and
680 that UMSDOS is somewhat slower than ext2fs. Another use of UMSDOS
681 is to write files with long unix filenames to MSDOS floppies; it
682 also allows Unix-style soft-links and owner/permissions of files on
683 MSDOS floppies. You will need a program called umssync in order to
684 make use of UMSDOS; read
685 <file:Documentation/filesystems/umsdos.txt>.
687 To get utilities for initializing/checking UMSDOS file system, or
688 latest patches and/or information, visit the UMSDOS home page at
689 <http://www.voyager.hr/~mnalis/umsdos/>.
691 This option enlarges your kernel by about 28 KB and it only works if
692 you said Y to both "DOS FAT fs support" and "MSDOS fs support"
693 above. To compile this as a module, choose M here: the module will be
694 called umsdos. Note that the file system of your root partition
695 (the one containing the directory /) cannot be a module, so saying M
696 could be dangerous. If unsure, say N.
699 tristate "NTFS file system support"
702 NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
704 Saying Y or M here enables read support. There is partial, but
705 safe, write support available. For write support you must also
706 say Y to "NTFS write support" below.
708 There are also a number of user-space tools available, called
709 ntfsprogs. These include ntfsundelete and ntfsresize, that work
710 without NTFS support enabled in the kernel.
712 This is a rewrite from scratch of Linux NTFS support and replaced
713 the old NTFS code starting with Linux 2.5.11. A backport to
714 the Linux 2.4 kernel series is separately available as a patch
715 from the project web site.
717 For more information see <file:Documentation/filesystems/ntfs.txt>
718 and <http://linux-ntfs.sourceforge.net/>.
720 To compile this file system support as a module, choose M here: the
721 module will be called ntfs.
723 If you are not using Windows NT, 2000, XP or 2003 in addition to
724 Linux on your computer it is safe to say N.
727 bool "NTFS debugging support"
730 If you are experiencing any problems with the NTFS file system, say
731 Y here. This will result in additional consistency checks to be
732 performed by the driver as well as additional debugging messages to
733 be written to the system log. Note that debugging messages are
734 disabled by default. To enable them, supply the option debug_msgs=1
735 at the kernel command line when booting the kernel or as an option
736 to insmod when loading the ntfs module. Once the driver is active,
737 you can enable debugging messages by doing (as root):
738 echo 1 > /proc/sys/fs/ntfs-debug
739 Replacing the "1" with "0" would disable debug messages.
741 If you leave debugging messages disabled, this results in little
742 overhead, but enabling debug messages results in very significant
743 slowdown of the system.
745 When reporting bugs, please try to have available a full dump of
746 debugging messages while the misbehaviour was occurring.
749 bool "NTFS write support"
752 This enables the partial, but safe, write support in the NTFS driver.
754 The only supported operation is overwriting existing files, without
755 changing the file length. No file or directory creation, deletion or
756 renaming is possible. Note only non-resident files can be written to
757 so you may find that some very small files (<500 bytes or so) cannot
760 While we cannot guarantee that it will not damage any data, we have
761 so far not received a single report where the driver would have
762 damaged someones data so we assume it is perfectly safe to use.
764 Note: While write support is safe in this version (a rewrite from
765 scratch of the NTFS support), it should be noted that the old NTFS
766 write support, included in Linux 2.5.10 and before (since 1997),
769 This is currently useful with TopologiLinux. TopologiLinux is run
770 on top of any DOS/Microsoft Windows system without partitioning your
771 hard disk. Unlike other Linux distributions TopologiLinux does not
772 need its own partition. For more information see
773 <http://topologi-linux.sourceforge.net/>
775 It is perfectly safe to say N here.
779 menu "Pseudo filesystems"
782 bool "/proc file system support"
784 This is a virtual file system providing information about the status
785 of the system. "Virtual" means that it doesn't take up any space on
786 your hard disk: the files are created on the fly by the kernel when
787 you try to access them. Also, you cannot read the files with older
788 version of the program less: you need to use more or cat.
790 It's totally cool; for example, "cat /proc/interrupts" gives
791 information about what the different IRQs are used for at the moment
792 (there is a small number of Interrupt ReQuest lines in your computer
793 that are used by the attached devices to gain the CPU's attention --
794 often a source of trouble if two devices are mistakenly configured
795 to use the same IRQ). The program procinfo to display some
796 information about your system gathered from the /proc file system.
798 Before you can use the /proc file system, it has to be mounted,
799 meaning it has to be given a location in the directory hierarchy.
800 That location should be /proc. A command such as "mount -t proc proc
801 /proc" or the equivalent line in /etc/fstab does the job.
803 The /proc file system is explained in the file
804 <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
807 This option will enlarge your kernel by about 67 KB. Several
808 programs depend on this, so everyone should say Y here.
815 bool "sysfs file system support" if EMBEDDED
818 The sysfs filesystem is a virtual filesystem that the kernel uses to
819 export internal kernel objects, their attributes, and their
820 relationships to one another.
822 Users can use sysfs to ascertain useful information about the running
823 kernel, such as the devices the kernel has discovered on each bus and
824 which driver each is bound to. sysfs can also be used to tune devices
825 and other kernel subsystems.
827 Some system agents rely on the information in sysfs to operate.
828 /sbin/hotplug uses device and object attributes in sysfs to assist in
829 delegating policy decisions, like persistantly naming devices.
831 sysfs is currently used by the block subsystem to mount the root
832 partition. If sysfs is disabled you must specify the boot device on
833 the kernel boot command line via its major and minor numbers. For
834 example, "root=03:01" for /dev/hda1.
836 Designers of embedded systems may wish to say N here to conserve space.
839 bool "/dev file system support (OBSOLETE)"
840 depends on EXPERIMENTAL
842 This is support for devfs, a virtual file system (like /proc) which
843 provides the file system interface to device drivers, normally found
844 in /dev. Devfs does not depend on major and minor number
845 allocations. Device drivers register entries in /dev which then
846 appear automatically, which means that the system administrator does
847 not have to create character and block special device files in the
848 /dev directory using the mknod command (or MAKEDEV script) anymore.
850 This is work in progress. If you want to use this, you *must* read
851 the material in <file:Documentation/filesystems/devfs/>, especially
852 the file README there.
854 Note that devfs no longer manages /dev/pts! If you are using UNIX98
855 ptys, you will also need to mount the /dev/pts filesystem (devpts).
857 Note that devfs has been obsoleted by udev,
858 <http://www.kernel.org/pub/linux/utils/kernel/hotplug/>.
859 It has been stripped down to a bare minimum and is only provided for
860 legacy installations that use its naming scheme which is
861 unfortunately different from the names normal Linux installations
867 bool "Automatically mount at boot"
870 This option appears if you have CONFIG_DEVFS_FS enabled. Setting
871 this to 'Y' will make the kernel automatically mount devfs onto /dev
872 when the system is booted, before the init thread is started.
873 You can override this with the "devfs=nomount" boot option.
881 If you say Y here, then the /dev file system code will generate
882 debugging messages. See the file
883 <file:Documentation/filesystems/devfs/boot-options> for more
888 config DEVPTS_FS_XATTR
889 bool "/dev/pts Extended Attributes"
890 depends on UNIX98_PTYS
892 Extended attributes are name:value pairs associated with inodes by
893 the kernel or by users (see the attr(5) manual page, or visit
894 <http://acl.bestbits.at/> for details).
898 config DEVPTS_FS_SECURITY
899 bool "/dev/pts Security Labels"
900 depends on DEVPTS_FS_XATTR
902 Security labels support alternative access control models
903 implemented by security modules like SELinux. This option
904 enables an extended attribute handler for file security
905 labels in the /dev/pts filesystem.
907 If you are not using a security module that requires using
908 extended attributes for file security labels, say N.
911 bool "Virtual memory file system support (former shm fs)"
913 Tmpfs is a file system which keeps all files in virtual memory.
915 Everything in tmpfs is temporary in the sense that no files will be
916 created on your hard drive. The files live in memory and swap
917 space. If you unmount a tmpfs instance, everything stored therein is
920 See <file:Documentation/filesystems/tmpfs.txt> for details.
923 bool "tmpfs Extended Attributes"
926 Extended attributes are name:value pairs associated with inodes by
927 the kernel or by users (see the attr(5) manual page, or visit
928 <http://acl.bestbits.at/> for details).
932 config TMPFS_SECURITY
933 bool "tmpfs Security Labels"
934 depends on TMPFS_XATTR
936 Security labels support alternative access control models
937 implemented by security modules like SELinux. This option
938 enables an extended attribute handler for file security
939 labels in the tmpfs filesystem.
940 If you are not using a security module that requires using
941 extended attributes for file security labels, say N.
944 bool "HugeTLB file system support"
945 depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || X86_64 || BROKEN
954 Ramfs is a file system which keeps all files in RAM. It allows
955 read and write access.
957 It is more of an programming example than a useable file system. If
958 you need a file system which lives in RAM with limit checking use
961 To compile this as a module, choose M here: the module will be called
965 tristate "Relayfs file system support"
967 Relayfs is a high-speed data relay filesystem designed to provide
968 an efficient mechanism for tools and facilities to relay large
969 amounts of data from kernel space to user space. It's not useful
970 on its own, and should only be enabled if other facilities that
971 need it are enabled, such as for example klog or the Linux Trace
974 See <file:Documentation/filesystems/relayfs.txt> for further
977 This file system is also available as a module ( = code which can be
978 inserted in and removed from the running kernel whenever you want).
979 The module is called relayfs. If you want to compile it as a
980 module, say M here and read <file:Documentation/modules.txt>.
985 bool "Enable klog debugging support"
986 depends on RELAYFS_FS
988 If you say Y to this, a relayfs channel named klog will be created
989 in the root of the relayfs file system. You can write to the klog
990 channel using klog() or klog_raw() from within the kernel or
991 kernel modules, and read from the klog channel by mounting relayfs
992 and using read(2) to read from it (or using cat). If you're not
995 config KLOG_CHANNEL_AUTOENABLE
996 bool "Enable klog logging on startup"
997 depends on KLOG_CHANNEL
1000 If you say Y to this, the klog channel will be automatically enabled
1001 on startup. Otherwise, to turn klog logging on, you need use
1002 sysctl (fs.relayfs.klog_enabled). This option is used in cases where
1003 you don't actually want the channel to be written to until it's
1004 enabled. If you're not sure, say Y.
1006 config KLOG_CHANNEL_SHIFT
1007 depends on KLOG_CHANNEL
1008 int "klog debugging channel size (14 => 16KB, 22 => 4MB)"
1012 Select klog debugging channel size as a power of 2.
1016 menu "Miscellaneous filesystems"
1019 tristate "ADFS file system support (EXPERIMENTAL)"
1020 depends on EXPERIMENTAL
1022 The Acorn Disc Filing System is the standard file system of the
1023 RiscOS operating system which runs on Acorn's ARM-based Risc PC
1024 systems and the Acorn Archimedes range of machines. If you say Y
1025 here, Linux will be able to read from ADFS partitions on hard drives
1026 and from ADFS-formatted floppy discs. If you also want to be able to
1027 write to those devices, say Y to "ADFS write support" below.
1029 The ADFS partition should be the first partition (i.e.,
1030 /dev/[hs]d?1) on each of your drives. Please read the file
1031 <file:Documentation/filesystems/adfs.txt> for further details.
1033 To compile this code as a module, choose M here: the module will be
1039 bool "ADFS write support (DANGEROUS)"
1042 If you say Y here, you will be able to write to ADFS partitions on
1043 hard drives and ADFS-formatted floppy disks. This is experimental
1044 codes, so if you're unsure, say N.
1047 tristate "Amiga FFS file system support (EXPERIMENTAL)"
1048 depends on EXPERIMENTAL
1050 The Fast File System (FFS) is the common file system used on hard
1051 disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
1052 if you want to be able to read and write files from and to an Amiga
1053 FFS partition on your hard drive. Amiga floppies however cannot be
1054 read with this driver due to an incompatibility of the floppy
1055 controller used in an Amiga and the standard floppy controller in
1056 PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
1057 and <file:fs/affs/Changes>.
1059 With this driver you can also mount disk files used by Bernd
1060 Schmidt's Un*X Amiga Emulator
1061 (<http://www.freiburg.linux.de/~uae/>).
1062 If you want to do this, you will also need to say Y or M to "Loop
1063 device support", above.
1065 To compile this file system support as a module, choose M here: the
1066 module will be called affs. If unsure, say N.
1069 tristate "Apple Macintosh file system support (EXPERIMENTAL)"
1070 depends on EXPERIMENTAL
1072 If you say Y here, you will be able to mount Macintosh-formatted
1073 floppy disks and hard drive partitions with full read-write access.
1074 Please read <file:fs/hfs/HFS.txt> to learn about the available mount
1077 To compile this file system support as a module, choose M here: the
1078 module will be called hfs.
1081 tristate "Apple Extended HFS file system support"
1084 If you say Y here, you will be able to mount extended format
1085 Macintosh-formatted hard drive partitions with full read-write access.
1087 This file system is often called HFS+ and was introduced with
1088 MacOS 8. It includes all Mac specific filesystem data such as
1089 data forks and creator codes, but it also has several UNIX
1090 style features such as file ownership and permissions.
1093 tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
1094 depends on EXPERIMENTAL
1097 The BeOS File System (BeFS) is the native file system of Be, Inc's
1098 BeOS. Notable features include support for arbitrary attributes
1099 on files and directories, and database-like indices on selected
1100 attributes. (Also note that this driver doesn't make those features
1101 available at this time). It is a 64 bit filesystem, so it supports
1102 extreemly large volumes and files.
1104 If you use this filesystem, you should also say Y to at least one
1105 of the NLS (native language support) options below.
1107 If you don't know what this is about, say N.
1109 To compile this as a module, choose M here: the module will be
1116 If you say Y here, you can use the 'debug' mount option to enable
1117 debugging output from the driver.
1120 tristate "BFS file system support (EXPERIMENTAL)"
1121 depends on EXPERIMENTAL
1123 Boot File System (BFS) is a file system used under SCO UnixWare to
1124 allow the bootloader access to the kernel image and other important
1125 files during the boot process. It is usually mounted under /stand
1126 and corresponds to the slice marked as "STAND" in the UnixWare
1127 partition. You should say Y if you want to read or write the files
1128 on your /stand slice from within Linux. You then also need to say Y
1129 to "UnixWare slices support", below. More information about the BFS
1130 file system is contained in the file
1131 <file:Documentation/filesystems/bfs.txt>.
1133 If you don't know what this is about, say N.
1135 To compile this as a module, choose M here: the module will be called
1136 bfs. Note that the file system of your root partition (the one
1137 containing the directory /) cannot be compiled as a module.
1142 tristate "EFS file system support (read only) (EXPERIMENTAL)"
1143 depends on EXPERIMENTAL
1145 EFS is an older file system used for non-ISO9660 CD-ROMs and hard
1146 disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
1147 uses the XFS file system for hard disk partitions however).
1149 This implementation only offers read-only access. If you don't know
1150 what all this is about, it's safe to say N. For more information
1151 about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
1153 To compile the EFS file system support as a module, choose M here: the
1154 module will be called efs.
1157 tristate "Journalling Flash File System (JFFS) support"
1160 JFFS is the Journaling Flash File System developed by Axis
1161 Communications in Sweden, aimed at providing a crash/powerdown-safe
1162 file system for disk-less embedded devices. Further information is
1163 available at (<http://developer.axis.com/software/jffs/>).
1165 config JFFS_FS_VERBOSE
1166 int "JFFS debugging verbosity (0 = quiet, 3 = noisy)"
1170 Determines the verbosity level of the JFFS debugging messages.
1173 bool "JFFS stats available in /proc filesystem"
1174 depends on JFFS_FS && PROC_FS
1176 Enabling this option will cause statistics from mounted JFFS file systems
1177 to be made available to the user in the /proc/fs/jffs/ directory.
1180 tristate "Journalling Flash File System v2 (JFFS2) support"
1184 JFFS2 is the second generation of the Journalling Flash File System
1185 for use on diskless embedded devices. It provides improved wear
1186 levelling, compression and support for hard links. You cannot use
1187 this on normal block devices, only on 'MTD' devices.
1189 Further information on the design and implementation of JFFS2 is
1190 available at <http://sources.redhat.com/jffs2/>.
1192 config JFFS2_FS_DEBUG
1193 int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
1197 This controls the amount of debugging messages produced by the JFFS2
1198 code. Set it to zero for use in production systems. For evaluation,
1199 testing and debugging, it's advisable to set it to one. This will
1200 enable a few assertions and will print debugging messages at the
1201 KERN_DEBUG loglevel, where they won't normally be visible. Level 2
1202 is unlikely to be useful - it enables extra debugging in certain
1203 areas which at one point needed debugging, but when the bugs were
1204 located and fixed, the detailed messages were relegated to level 2.
1206 If reporting bugs, please try to have available a full dump of the
1207 messages at debug level 1 while the misbehaviour was occurring.
1209 config JFFS2_FS_NAND
1210 bool "JFFS2 support for NAND flash"
1214 This enables the support for NAND flash in JFFS2. NAND is a newer
1215 type of flash chip design than the traditional NOR flash, with
1216 higher density but a handful of characteristics which make it more
1217 interesting for the file system to use.
1219 Say 'N' unless you have NAND flash.
1221 config JFFS2_COMPRESSION_OPTIONS
1222 bool "Advanced compression options for JFFS2"
1226 Enabling this option allows you to explicitly choose which
1227 compression modules, if any, are enabled in JFFS2. Removing
1228 compressors and mean you cannot read existing file systems,
1229 and enabling experimental compressors can mean that you
1230 write a file system which cannot be read by a standard kernel.
1232 If unsure, you should _definitely_ say 'N'.
1235 bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
1241 Zlib is designed to be a free, general-purpose, legally unencumbered,
1242 lossless data-compression library for use on virtually any computer
1243 hardware and operating system. See http://www.gzip.org/zlib/ for
1244 further information.
1249 bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
1253 Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
1256 bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
1260 RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
1263 prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
1264 default JFFS2_CMODE_PRIORITY
1267 You can set here the default compression mode of JFFS2 from
1268 the avaiable compression modes. Don't touch if unsure.
1270 config JFFS2_CMODE_NONE
1271 bool "no compression"
1273 Uses no compression.
1275 config JFFS2_CMODE_PRIORITY
1278 Tries the compressors in a predefinied order and chooses the first
1281 config JFFS2_CMODE_SIZE
1282 bool "size (EXPERIMENTAL)"
1284 Tries all compressors and chooses the one which has the smallest
1290 tristate "Compressed ROM file system support (cramfs)"
1293 Saying Y here includes support for CramFs (Compressed ROM File
1294 System). CramFs is designed to be a simple, small, and compressed
1295 file system for ROM based embedded systems. CramFs is read-only,
1296 limited to 256MB file systems (with 16MB files), and doesn't support
1297 16/32 bits uid/gid, hard links and timestamps.
1299 See <file:Documentation/filesystems/cramfs.txt> and
1300 <file:fs/cramfs/README> for further information.
1302 To compile this as a module, choose M here: the module will be called
1303 cramfs. Note that the root file system (the one containing the
1304 directory /) cannot be compiled as a module.
1309 tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
1311 FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
1312 file system format. VERITAS VxFS(TM) is the standard file system
1313 of SCO UnixWare (and possibly others) and optionally available
1314 for Sunsoft Solaris, HP-UX and many other operating systems.
1315 Currently only readonly access is supported.
1317 NOTE: the file system type as used by mount(1), mount(2) and
1318 fstab(5) is 'vxfs' as it describes the file system format, not
1321 To compile this as a module, choose M here: the module will be
1322 called freevxfs. If unsure, say N.
1326 tristate "OS/2 HPFS file system support"
1328 OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
1329 is the file system used for organizing files on OS/2 hard disk
1330 partitions. Say Y if you want to be able to read files from and
1331 write files to an OS/2 HPFS partition on your hard drive. OS/2
1332 floppies however are in regular MSDOS format, so you don't need this
1333 option in order to be able to read them. Read
1334 <file:Documentation/filesystems/hpfs.txt>.
1336 To compile this file system support as a module, choose M here: the
1337 module will be called hpfs. If unsure, say N.
1340 tristate "QNX4 file system support (read only)"
1342 This is the file system used by the real-time operating systems
1343 QNX 4 and QNX 6 (the latter is also called QNX RTP).
1344 Further information is available at <http://www.qnx.com/>.
1345 Say Y if you intend to mount QNX hard disks or floppies.
1346 Unless you say Y to "QNX4FS read-write support" below, you will
1347 only be able to read these file systems.
1349 To compile this file system support as a module, choose M here: the
1350 module will be called qnx4.
1352 If you don't know whether you need it, then you don't need it:
1356 bool "QNX4FS write support (DANGEROUS)"
1357 depends on QNX4FS_FS && EXPERIMENTAL
1359 Say Y if you want to test write support for QNX4 file systems.
1361 It's currently broken, so for now:
1365 tristate "System V/Xenix/V7/Coherent file system support"
1367 SCO, Xenix and Coherent are commercial Unix systems for Intel
1368 machines, and Version 7 was used on the DEC PDP-11. Saying Y
1369 here would allow you to read from their floppies and hard disk
1372 If you have floppies or hard disk partitions like that, it is likely
1373 that they contain binaries from those other Unix systems; in order
1374 to run these binaries, you will want to install linux-abi which is a
1375 a set of kernel modules that lets you run SCO, Xenix, Wyse,
1376 UnixWare, Dell Unix and System V programs under Linux. It is
1377 available via FTP (user: ftp) from
1378 <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
1379 NOTE: that will work only for binaries from Intel-based systems;
1380 PDP ones will have to wait until somebody ports Linux to -11 ;-)
1382 If you only intend to mount files from some other Unix over the
1383 network using NFS, you don't need the System V file system support
1384 (but you need NFS file system support obviously).
1386 Note that this option is generally not needed for floppies, since a
1387 good portable way to transport files and directories between unixes
1388 (and even other operating systems) is given by the tar program ("man
1389 tar" or preferably "info tar"). Note also that this option has
1390 nothing whatsoever to do with the option "System V IPC". Read about
1391 the System V file system in
1392 <file:Documentation/filesystems/sysv-fs.txt>.
1393 Saying Y here will enlarge your kernel by about 27 KB.
1395 To compile this as a module, choose M here: the module will be called
1398 If you haven't heard about all of this before, it's safe to say N.
1401 tristate "UFS file system support (read only)"
1403 BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
1404 OpenBSD and NeXTstep) use a file system called UFS. Some System V
1405 Unixes can create and mount hard disk partitions and diskettes using
1406 this file system as well. Saying Y here will allow you to read from
1407 these partitions; if you also want to write to them, say Y to the
1408 experimental "UFS file system write support", below. Please read the
1409 file <file:Documentation/filesystems/ufs.txt> for more information.
1411 The recently released UFS2 variant (used in FreeBSD 5.x) is
1412 READ-ONLY supported.
1414 If you only intend to mount files from some other Unix over the
1415 network using NFS, you don't need the UFS file system support (but
1416 you need NFS file system support obviously).
1418 Note that this option is generally not needed for floppies, since a
1419 good portable way to transport files and directories between unixes
1420 (and even other operating systems) is given by the tar program ("man
1421 tar" or preferably "info tar").
1423 When accessing NeXTstep files, you may need to convert them from the
1424 NeXT character set to the Latin1 character set; use the program
1425 recode ("info recode") for this purpose.
1427 To compile the UFS file system support as a module, choose M here: the
1428 module will be called ufs.
1430 If you haven't heard about all of this before, it's safe to say N.
1433 bool "UFS file system write support (DANGEROUS)"
1434 depends on UFS_FS && EXPERIMENTAL
1436 Say Y here if you want to try writing to UFS partitions. This is
1437 experimental, so you should back up your UFS partitions beforehand.
1441 menu "Network File Systems"
1445 tristate "NFS file system support"
1450 If you are connected to some other (usually local) Unix computer
1451 (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
1452 on that computer (the NFS server) using the Network File Sharing
1453 protocol, say Y. "Mounting files" means that the client can access
1454 the files with usual UNIX commands as if they were sitting on the
1455 client's hard disk. For this to work, the server must run the
1456 programs nfsd and mountd (but does not need to have NFS file system
1457 support enabled in its kernel). NFS is explained in the Network
1458 Administrator's Guide, available from
1459 <http://www.tldp.org/docs.html#guide>, on its man page: "man
1460 nfs", and in the NFS-HOWTO.
1462 A superior but less widely used alternative to NFS is provided by
1463 the Coda file system; see "Coda file system support" below.
1465 If you say Y here, you should have said Y to TCP/IP networking also.
1466 This option would enlarge your kernel by about 27 KB.
1468 To compile this file system support as a module, choose M here: the
1469 module will be called nfs.
1471 If you are configuring a diskless machine which will mount its root
1472 file system over NFS at boot time, say Y here and to "Kernel
1473 level IP autoconfiguration" above and to "Root file system on NFS"
1474 below. You cannot compile this driver as a module in this case.
1475 There are two packages designed for booting diskless machines over
1476 the net: netboot, available from
1477 <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
1478 available from <http://ftp1.sourceforge.net/etherboot/>.
1480 If you don't know what all this is about, say N.
1483 bool "Provide NFSv3 client support"
1486 Say Y here if you want your NFS client to be able to speak version
1487 3 of the NFS protocol.
1492 bool "Provide NFSv4 client support (EXPERIMENTAL)"
1493 depends on NFS_FS && EXPERIMENTAL
1494 select RPCSEC_GSS_KRB5
1496 Say Y here if you want your NFS client to be able to speak the newer
1497 version 4 of the NFS protocol.
1499 Note: Requires auxiliary userspace daemons which may be found on
1500 http://www.citi.umich.edu/projects/nfsv4/
1505 bool "Allow direct I/O on NFS files (EXPERIMENTAL)"
1506 depends on NFS_FS && EXPERIMENTAL
1508 This option enables applications to perform uncached I/O on files
1509 in NFS file systems using the O_DIRECT open() flag. When O_DIRECT
1510 is set for a file, its data is not cached in the system's page
1511 cache. Data is moved to and from user-level application buffers
1512 directly. Unlike local disk-based file systems, NFS O_DIRECT has
1513 no alignment restrictions.
1515 Unless your program is designed to use O_DIRECT properly, you are
1516 much better off allowing the NFS client to manage data caching for
1517 you. Misusing O_DIRECT can cause poor server performance or network
1518 storms. This kernel build option defaults OFF to avoid exposing
1519 system administrators unwittingly to a potentially hazardous
1522 For more details on NFS O_DIRECT, see fs/nfs/direct.c.
1524 If unsure, say N. This reduces the size of the NFS client, and
1525 causes open() to return EINVAL if a file residing in NFS is
1526 opened with the O_DIRECT flag.
1529 tristate "NFS server support"
1534 If you want your Linux box to act as an NFS *server*, so that other
1535 computers on your local network which support NFS can access certain
1536 directories on your box transparently, you have two options: you can
1537 use the self-contained user space program nfsd, in which case you
1538 should say N here, or you can say Y and use the kernel based NFS
1539 server. The advantage of the kernel based solution is that it is
1542 In either case, you will need support software; the respective
1543 locations are given in the file <file:Documentation/Changes> in the
1546 If you say Y here, you will get support for version 2 of the NFS
1547 protocol (NFSv2). If you also want NFSv3, say Y to the next question
1550 Please read the NFS-HOWTO, available from
1551 <http://www.tldp.org/docs.html#howto>.
1553 To compile the NFS server support as a module, choose M here: the
1554 module will be called nfsd. If unsure, say N.
1557 bool "Provide NFSv3 server support"
1560 If you would like to include the NFSv3 server as well as the NFSv2
1561 server, say Y here. If unsure, say Y.
1564 bool "Provide NFSv4 server support (EXPERIMENTAL)"
1565 depends on NFSD_V3 && EXPERIMENTAL
1568 If you would like to include the NFSv4 server as well as the NFSv2
1569 and NFSv3 servers, say Y here. This feature is experimental, and
1570 should only be used if you are interested in helping to test NFSv4.
1574 bool "Provide NFS server over TCP support"
1578 If you want your NFS server to support TCP connections, say Y here.
1579 TCP connections usually perform better than the default UDP when
1580 the network is lossy or congested. If unsure, say Y.
1583 bool "Root file system on NFS"
1584 depends on NFS_FS=y && IP_PNP
1586 If you want your Linux box to mount its whole root file system (the
1587 one containing the directory /) from some other computer over the
1588 net via NFS (presumably because your box doesn't have a hard disk),
1589 say Y. Read <file:Documentation/nfsroot.txt> for details. It is
1590 likely that in this case, you also want to say Y to "Kernel level IP
1591 autoconfiguration" so that your box can discover its network address
1594 Most people say N here.
1601 depends on NFSD_V3 || NFS_V3
1614 config RPCSEC_GSS_KRB5
1615 tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
1616 depends on SUNRPC && EXPERIMENTAL
1622 Provides for secure RPC calls by means of a gss-api
1623 mechanism based on Kerberos V5. This is required for
1626 Note: Requires an auxiliary userspace daemon which may be found on
1627 http://www.citi.umich.edu/projects/nfsv4/
1631 config RPCSEC_GSS_SPKM3
1632 tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
1633 depends on SUNRPC && EXPERIMENTAL
1639 Provides for secure RPC calls by means of a gss-api
1640 mechanism based on the SPKM3 public-key mechanism.
1642 Note: Requires an auxiliary userspace daemon which may be found on
1643 http://www.citi.umich.edu/projects/nfsv4/
1648 tristate "SMB file system support (to mount Windows shares etc.)"
1652 SMB (Server Message Block) is the protocol Windows for Workgroups
1653 (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
1654 files and printers over local networks. Saying Y here allows you to
1655 mount their file systems (often called "shares" in this context) and
1656 access them just like any other Unix directory. Currently, this
1657 works only if the Windows machines use TCP/IP as the underlying
1658 transport protocol, and not NetBEUI. For details, read
1659 <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
1660 available from <http://www.tldp.org/docs.html#howto>.
1662 Note: if you just want your box to act as an SMB *server* and make
1663 files and printing services available to Windows clients (which need
1664 to have a TCP/IP stack), you don't need to say Y here; you can use
1665 the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
1668 General information about how to connect Linux, Windows machines and
1669 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
1671 To compile the SMB support as a module, choose M here: the module will
1672 be called smbfs. Most people say N, however.
1674 config SMB_NLS_DEFAULT
1675 bool "Use a default NLS"
1678 Enabling this will make smbfs use nls translations by default. You
1679 need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
1680 settings and you need to give the default nls for the SMB server as
1681 CONFIG_SMB_NLS_REMOTE.
1683 The nls settings can be changed at mount time, if your smbmount
1684 supports that, using the codepage and iocharset parameters.
1686 smbmount from samba 2.2.0 or later supports this.
1688 config SMB_NLS_REMOTE
1689 string "Default Remote NLS Option"
1690 depends on SMB_NLS_DEFAULT
1693 This setting allows you to specify a default value for which
1694 codepage the server uses. If this field is left blank no
1695 translations will be done by default. The local codepage/charset
1696 default to CONFIG_NLS_DEFAULT.
1698 The nls settings can be changed at mount time, if your smbmount
1699 supports that, using the codepage and iocharset parameters.
1701 smbmount from samba 2.2.0 or later supports this.
1704 tristate "CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)"
1708 This is the client VFS module for the Common Internet File System
1709 (CIFS) protocol which is the successor to the Server Message Block
1710 (SMB) protocol, the native file sharing mechanism for most early
1711 PC operating systems. The CIFS protocol is fully supported by
1712 file servers such as Windows 2000 (including Windows 2003, NT 4
1713 and Windows XP) as well by Samba (which provides excellent CIFS
1714 server support for Linux and many other operating systems). Currently
1715 you must use the smbfs client filesystem to access older SMB servers
1716 such as Windows 9x and OS/2.
1718 The intent of the cifs module is to provide an advanced
1719 network file system client for mounting to CIFS compliant servers,
1720 including support for dfs (hierarchical name space), secure per-user
1721 session establishment, safe distributed caching (oplock), optional
1722 packet signing, Unicode and other internationalization improvements,
1723 and optional Winbind (nsswitch) integration. You do not need to enable
1724 cifs if running only a (Samba) server. It is possible to enable both
1725 smbfs and cifs (e.g. if you are using CIFS for accessing Windows 2003
1726 and Samba 3 servers, and smbfs for accessing old servers). If you need
1727 to mount to Samba or Windows 2003 servers from this machine, say Y.
1730 bool "CIFS statistics"
1733 Enabling this option will cause statistics for each server share
1734 mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
1737 bool "CIFS extended attributes (EXPERIMENTAL)"
1740 Extended attributes are name:value pairs associated with inodes by
1741 the kernel or by users (see the attr(5) manual page, or visit
1742 <http://acl.bestbits.at/> for details). CIFS maps the name of
1743 extended attributes beginning with the user namespace prefix
1744 to SMB/CIFS EAs. EAs are stored on Windows servers without the
1745 user namespace prefix, but their names are seen by Linux cifs clients
1746 prefaced by the user namespace prefix. The system namespace
1747 (used by some filesystems to store ACLs) is not supported at
1753 bool "CIFS POSIX Extensions (EXPERIMENTAL)"
1756 Enabling this option will cause the cifs client to attempt to
1757 negotiate a newer dialect with servers, such as Samba 3.0.5
1758 or later, that optionally can handle more POSIX like (rather
1759 than Windows like) file behavior. If unsure, say N.
1762 tristate "NCP file system support (to mount NetWare volumes)"
1763 depends on IPX!=n || INET
1765 NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
1766 used by Novell NetWare clients to talk to file servers. It is to
1767 IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
1768 to mount NetWare file server volumes and to access them just like
1769 any other Unix directory. For details, please read the file
1770 <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
1771 the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
1773 You do not have to say Y here if you want your Linux box to act as a
1774 file *server* for Novell NetWare clients.
1776 General information about how to connect Linux, Windows machines and
1777 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
1779 To compile this as a module, choose M here: the module will be called
1780 ncpfs. Say N unless you are connected to a Novell network.
1782 source "fs/ncpfs/Kconfig"
1785 tristate "Coda file system support (advanced network fs)"
1788 Coda is an advanced network file system, similar to NFS in that it
1789 enables you to mount file systems of a remote server and access them
1790 with regular Unix commands as if they were sitting on your hard
1791 disk. Coda has several advantages over NFS: support for
1792 disconnected operation (e.g. for laptops), read/write server
1793 replication, security model for authentication and encryption,
1794 persistent client caches and write back caching.
1796 If you say Y here, your Linux box will be able to act as a Coda
1797 *client*. You will need user level code as well, both for the
1798 client and server. Servers are currently user level, i.e. they need
1799 no kernel support. Please read
1800 <file:Documentation/filesystems/coda.txt> and check out the Coda
1801 home page <http://www.coda.cs.cmu.edu/>.
1803 To compile the coda client support as a module, choose M here: the
1804 module will be called coda.
1806 config CODA_FS_OLD_API
1807 bool "Use 96-bit Coda file identifiers"
1810 A new kernel-userspace API had to be introduced for Coda v6.0
1811 to support larger 128-bit file identifiers as needed by the
1812 new realms implementation.
1814 However this new API is not backward compatible with older
1815 clients. If you really need to run the old Coda userspace
1816 cache manager then say Y.
1818 For most cases you probably want to say N.
1821 # for fs/nls/Config.in
1822 tristate "Andrew File System support (AFS) (Experimental)"
1823 depends on INET && EXPERIMENTAL
1826 If you say Y here, you will get an experimental Andrew File System
1827 driver. It currently only supports unsecured read-only AFS access.
1829 See Documentation/filesystems/afs.txt for more intormation.
1838 menu "Partition Types"
1840 source "fs/partitions/Kconfig"
1844 source "fs/nls/Kconfig"