2 * linux/fs/ext3/super.c
4 * Copyright (C) 1992, 1993, 1994, 1995
5 * Remy Card (card@masi.ibp.fr)
6 * Laboratoire MASI - Institut Blaise Pascal
7 * Universite Pierre et Marie Curie (Paris VI)
11 * linux/fs/minix/inode.c
13 * Copyright (C) 1991, 1992 Linus Torvalds
15 * Big-endian to little-endian byte-swapping/bitmaps by
16 * David S. Miller (davem@caip.rutgers.edu), 1995
19 #include <linux/config.h>
20 #include <linux/module.h>
21 #include <linux/string.h>
23 #include <linux/time.h>
24 #include <linux/jbd.h>
25 #include <linux/ext3_fs.h>
26 #include <linux/ext3_jbd.h>
27 #include <linux/slab.h>
28 #include <linux/init.h>
29 #include <linux/blkdev.h>
30 #include <linux/parser.h>
31 #include <linux/smp_lock.h>
32 #include <linux/buffer_head.h>
33 #include <linux/vfs.h>
34 #include <linux/random.h>
35 #include <linux/mount.h>
36 #include <linux/namei.h>
37 #include <linux/quotaops.h>
38 #include <asm/uaccess.h>
42 static int ext3_load_journal(struct super_block *, struct ext3_super_block *);
43 static int ext3_create_journal(struct super_block *, struct ext3_super_block *,
45 static void ext3_commit_super (struct super_block * sb,
46 struct ext3_super_block * es,
48 static void ext3_mark_recovery_complete(struct super_block * sb,
49 struct ext3_super_block * es);
50 static void ext3_clear_journal_err(struct super_block * sb,
51 struct ext3_super_block * es);
52 static int ext3_sync_fs(struct super_block *sb, int wait);
55 * Wrappers for journal_start/end.
57 * The only special thing we need to do here is to make sure that all
58 * journal_end calls result in the superblock being marked dirty, so
59 * that sync() will call the filesystem's write_super callback if
62 handle_t *ext3_journal_start(struct inode *inode, int nblocks)
66 if (inode->i_sb->s_flags & MS_RDONLY)
67 return ERR_PTR(-EROFS);
69 /* Special case here: if the journal has aborted behind our
70 * backs (eg. EIO in the commit thread), then we still need to
71 * take the FS itself readonly cleanly. */
72 journal = EXT3_JOURNAL(inode);
73 if (is_journal_aborted(journal)) {
74 ext3_abort(inode->i_sb, __FUNCTION__,
75 "Detected aborted journal");
76 return ERR_PTR(-EROFS);
79 return journal_start(journal, nblocks);
83 * The only special thing we need to do here is to make sure that all
84 * journal_stop calls result in the superblock being marked dirty, so
85 * that sync() will call the filesystem's write_super callback if
88 int __ext3_journal_stop(const char *where, handle_t *handle)
90 struct super_block *sb;
94 sb = handle->h_transaction->t_journal->j_private;
96 rc = journal_stop(handle);
101 __ext3_std_error(sb, where, err);
105 void ext3_journal_abort_handle(const char *caller, const char *err_fn,
106 struct buffer_head *bh, handle_t *handle, int err)
109 const char *errstr = ext3_decode_error(NULL, err, nbuf);
111 printk(KERN_ERR "%s: aborting transaction: %s in %s",
112 caller, errstr, err_fn);
115 BUFFER_TRACE(bh, "abort");
116 journal_abort_handle(handle);
121 static char error_buf[1024];
123 /* Deal with the reporting of failure conditions on a filesystem such as
124 * inconsistencies detected or read IO failures.
126 * On ext2, we can store the error state of the filesystem in the
127 * superblock. That is not possible on ext3, because we may have other
128 * write ordering constraints on the superblock which prevent us from
129 * writing it out straight away; and given that the journal is about to
130 * be aborted, we can't rely on the current, or future, transactions to
131 * write out the superblock safely.
133 * We'll just use the journal_abort() error code to record an error in
134 * the journal instead. On recovery, the journal will compain about
135 * that error until we've noted it down and cleared it.
138 static void ext3_handle_error(struct super_block *sb)
140 struct ext3_super_block *es = EXT3_SB(sb)->s_es;
142 EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
143 es->s_state |= cpu_to_le32(EXT3_ERROR_FS);
145 if (sb->s_flags & MS_RDONLY)
148 if (test_opt (sb, ERRORS_PANIC))
149 panic ("EXT3-fs (device %s): panic forced after error\n",
151 if (test_opt (sb, ERRORS_RO)) {
152 printk (KERN_CRIT "Remounting filesystem read-only\n");
153 sb->s_flags |= MS_RDONLY;
155 journal_t *journal = EXT3_SB(sb)->s_journal;
157 EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
159 journal_abort(journal, -EIO);
161 ext3_commit_super(sb, es, 1);
164 void ext3_error (struct super_block * sb, const char * function,
165 const char * fmt, ...)
169 va_start (args, fmt);
170 vsprintf (error_buf, fmt, args);
173 printk (KERN_CRIT "EXT3-fs error (device %s): %s: %s\n",
174 sb->s_id, function, error_buf);
176 ext3_handle_error(sb);
179 const char *ext3_decode_error(struct super_block * sb, int errno, char nbuf[16])
185 errstr = "IO failure";
188 errstr = "Out of memory";
191 if (!sb || EXT3_SB(sb)->s_journal->j_flags & JFS_ABORT)
192 errstr = "Journal has aborted";
194 errstr = "Readonly filesystem";
197 /* If the caller passed in an extra buffer for unknown
198 * errors, textualise them now. Else we just return
201 /* Check for truncated error codes... */
202 if (snprintf(nbuf, 16, "error %d", -errno) >= 0)
211 /* __ext3_std_error decodes expected errors from journaling functions
212 * automatically and invokes the appropriate error response. */
214 void __ext3_std_error (struct super_block * sb, const char * function,
218 const char *errstr = ext3_decode_error(sb, errno, nbuf);
220 printk (KERN_CRIT "EXT3-fs error (device %s) in %s: %s\n",
221 sb->s_id, function, errstr);
223 ext3_handle_error(sb);
227 * ext3_abort is a much stronger failure handler than ext3_error. The
228 * abort function may be used to deal with unrecoverable failures such
229 * as journal IO errors or ENOMEM at a critical moment in log management.
231 * We unconditionally force the filesystem into an ABORT|READONLY state,
232 * unless the error response on the fs has been set to panic in which
233 * case we take the easy way out and panic immediately.
236 void ext3_abort (struct super_block * sb, const char * function,
237 const char * fmt, ...)
241 printk (KERN_CRIT "ext3_abort called.\n");
243 va_start (args, fmt);
244 vsprintf (error_buf, fmt, args);
247 if (test_opt (sb, ERRORS_PANIC))
248 panic ("EXT3-fs panic (device %s): %s: %s\n",
249 sb->s_id, function, error_buf);
251 printk (KERN_CRIT "EXT3-fs abort (device %s): %s: %s\n",
252 sb->s_id, function, error_buf);
254 if (sb->s_flags & MS_RDONLY)
257 printk (KERN_CRIT "Remounting filesystem read-only\n");
258 EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
259 sb->s_flags |= MS_RDONLY;
260 EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
261 journal_abort(EXT3_SB(sb)->s_journal, -EIO);
264 /* Deal with the reporting of failure conditions while running, such as
265 * inconsistencies in operation or invalid system states.
267 * Use ext3_error() for cases of invalid filesystem states, as that will
268 * record an error on disk and force a filesystem check on the next boot.
270 NORET_TYPE void ext3_panic (struct super_block * sb, const char * function,
271 const char * fmt, ...)
275 va_start (args, fmt);
276 vsprintf (error_buf, fmt, args);
279 /* this is to prevent panic from syncing this filesystem */
280 /* AKPM: is this sufficient? */
281 sb->s_flags |= MS_RDONLY;
282 panic ("EXT3-fs panic (device %s): %s: %s\n",
283 sb->s_id, function, error_buf);
286 void ext3_warning (struct super_block * sb, const char * function,
287 const char * fmt, ...)
291 va_start (args, fmt);
292 vsprintf (error_buf, fmt, args);
294 printk (KERN_WARNING "EXT3-fs warning (device %s): %s: %s\n",
295 sb->s_id, function, error_buf);
298 void ext3_update_dynamic_rev(struct super_block *sb)
300 struct ext3_super_block *es = EXT3_SB(sb)->s_es;
302 if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV)
305 ext3_warning(sb, __FUNCTION__,
306 "updating to rev %d because of new feature flag, "
307 "running e2fsck is recommended",
310 es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO);
311 es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE);
312 es->s_rev_level = cpu_to_le32(EXT3_DYNAMIC_REV);
313 /* leave es->s_feature_*compat flags alone */
314 /* es->s_uuid will be set by e2fsck if empty */
317 * The rest of the superblock fields should be zero, and if not it
318 * means they are likely already in use, so leave them alone. We
319 * can leave it up to e2fsck to clean up any inconsistencies there.
324 * Open the external journal device
326 static struct block_device *ext3_blkdev_get(dev_t dev)
328 struct block_device *bdev;
329 char b[BDEVNAME_SIZE];
331 bdev = open_by_devnum(dev, FMODE_READ|FMODE_WRITE);
337 printk(KERN_ERR "EXT3: failed to open journal device %s: %ld\n",
338 __bdevname(dev, b), PTR_ERR(bdev));
343 * Release the journal device
345 static int ext3_blkdev_put(struct block_device *bdev)
348 return blkdev_put(bdev);
351 static int ext3_blkdev_remove(struct ext3_sb_info *sbi)
353 struct block_device *bdev;
356 bdev = sbi->journal_bdev;
358 ret = ext3_blkdev_put(bdev);
359 sbi->journal_bdev = NULL;
364 static inline struct inode *orphan_list_entry(struct list_head *l)
366 return &list_entry(l, struct ext3_inode_info, i_orphan)->vfs_inode;
369 static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi)
373 printk(KERN_ERR "sb orphan head is %d\n",
374 le32_to_cpu(sbi->s_es->s_last_orphan));
376 printk(KERN_ERR "sb_info orphan list:\n");
377 list_for_each(l, &sbi->s_orphan) {
378 struct inode *inode = orphan_list_entry(l);
380 "inode %s:%ld at %p: mode %o, nlink %d, next %d\n",
381 inode->i_sb->s_id, inode->i_ino, inode,
382 inode->i_mode, inode->i_nlink,
383 le32_to_cpu(NEXT_ORPHAN(inode)));
387 void ext3_put_super (struct super_block * sb)
389 struct ext3_sb_info *sbi = EXT3_SB(sb);
390 struct ext3_super_block *es = sbi->s_es;
393 ext3_xattr_put_super(sb);
394 journal_destroy(sbi->s_journal);
395 if (!(sb->s_flags & MS_RDONLY)) {
396 EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
397 es->s_state = le16_to_cpu(sbi->s_mount_state);
398 BUFFER_TRACE(sbi->s_sbh, "marking dirty");
399 mark_buffer_dirty(sbi->s_sbh);
400 ext3_commit_super(sb, es, 1);
403 for (i = 0; i < sbi->s_gdb_count; i++)
404 brelse(sbi->s_group_desc[i]);
405 kfree(sbi->s_group_desc);
409 for (i = 0; i < MAXQUOTAS; i++) {
410 if (sbi->s_qf_names[i])
411 kfree(sbi->s_qf_names[i]);
415 /* Debugging code just in case the in-memory inode orphan list
416 * isn't empty. The on-disk one can be non-empty if we've
417 * detected an error and taken the fs readonly, but the
418 * in-memory list had better be clean by this point. */
419 if (!list_empty(&sbi->s_orphan))
420 dump_orphan_list(sb, sbi);
421 J_ASSERT(list_empty(&sbi->s_orphan));
423 invalidate_bdev(sb->s_bdev, 0);
424 if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) {
426 * Invalidate the journal device's buffers. We don't want them
427 * floating about in memory - the physical journal device may
428 * hotswapped, and it breaks the `ro-after' testing code.
430 sync_blockdev(sbi->journal_bdev);
431 invalidate_bdev(sbi->journal_bdev, 0);
432 ext3_blkdev_remove(sbi);
434 sb->s_fs_info = NULL;
439 static kmem_cache_t *ext3_inode_cachep;
442 * Called inside transaction, so use GFP_NOFS
444 static struct inode *ext3_alloc_inode(struct super_block *sb)
446 struct ext3_inode_info *ei;
448 ei = kmem_cache_alloc(ext3_inode_cachep, SLAB_NOFS);
451 #ifdef CONFIG_EXT3_FS_POSIX_ACL
452 ei->i_acl = EXT3_ACL_NOT_CACHED;
453 ei->i_default_acl = EXT3_ACL_NOT_CACHED;
455 ei->vfs_inode.i_version = 1;
456 return &ei->vfs_inode;
459 static void ext3_destroy_inode(struct inode *inode)
461 kmem_cache_free(ext3_inode_cachep, EXT3_I(inode));
464 static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags)
466 struct ext3_inode_info *ei = (struct ext3_inode_info *) foo;
468 if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
469 SLAB_CTOR_CONSTRUCTOR) {
470 INIT_LIST_HEAD(&ei->i_orphan);
471 #ifdef CONFIG_EXT3_FS_XATTR
472 init_rwsem(&ei->xattr_sem);
474 init_MUTEX(&ei->truncate_sem);
475 inode_init_once(&ei->vfs_inode);
479 static int init_inodecache(void)
481 ext3_inode_cachep = kmem_cache_create("ext3_inode_cache",
482 sizeof(struct ext3_inode_info),
483 0, SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT,
485 if (ext3_inode_cachep == NULL)
490 static void destroy_inodecache(void)
492 if (kmem_cache_destroy(ext3_inode_cachep))
493 printk(KERN_INFO "ext3_inode_cache: not all structures were freed\n");
496 #ifdef CONFIG_EXT3_FS_POSIX_ACL
498 static void ext3_clear_inode(struct inode *inode)
500 if (EXT3_I(inode)->i_acl &&
501 EXT3_I(inode)->i_acl != EXT3_ACL_NOT_CACHED) {
502 posix_acl_release(EXT3_I(inode)->i_acl);
503 EXT3_I(inode)->i_acl = EXT3_ACL_NOT_CACHED;
505 if (EXT3_I(inode)->i_default_acl &&
506 EXT3_I(inode)->i_default_acl != EXT3_ACL_NOT_CACHED) {
507 posix_acl_release(EXT3_I(inode)->i_default_acl);
508 EXT3_I(inode)->i_default_acl = EXT3_ACL_NOT_CACHED;
513 # define ext3_clear_inode NULL
518 #define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group")
519 #define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
521 static int ext3_dquot_initialize(struct inode *inode, int type);
522 static int ext3_dquot_drop(struct inode *inode);
523 static int ext3_write_dquot(struct dquot *dquot);
524 static int ext3_acquire_dquot(struct dquot *dquot);
525 static int ext3_release_dquot(struct dquot *dquot);
526 static int ext3_mark_dquot_dirty(struct dquot *dquot);
527 static int ext3_write_info(struct super_block *sb, int type);
528 static int ext3_quota_on(struct super_block *sb, int type, int format_id, char *path);
529 static int ext3_quota_on_mount(struct super_block *sb, int type);
530 static int ext3_quota_off_mount(struct super_block *sb, int type);
532 static struct dquot_operations ext3_quota_operations = {
533 .initialize = ext3_dquot_initialize,
534 .drop = ext3_dquot_drop,
535 .alloc_space = dquot_alloc_space,
536 .alloc_inode = dquot_alloc_inode,
537 .free_space = dquot_free_space,
538 .free_inode = dquot_free_inode,
539 .transfer = dquot_transfer,
540 .write_dquot = ext3_write_dquot,
541 .acquire_dquot = ext3_acquire_dquot,
542 .release_dquot = ext3_release_dquot,
543 .mark_dirty = ext3_mark_dquot_dirty,
544 .write_info = ext3_write_info
547 static struct quotactl_ops ext3_qctl_operations = {
548 .quota_on = ext3_quota_on,
549 .quota_off = vfs_quota_off,
550 .quota_sync = vfs_quota_sync,
551 .get_info = vfs_get_dqinfo,
552 .set_info = vfs_set_dqinfo,
553 .get_dqblk = vfs_get_dqblk,
554 .set_dqblk = vfs_set_dqblk
558 static struct super_operations ext3_sops = {
559 .alloc_inode = ext3_alloc_inode,
560 .destroy_inode = ext3_destroy_inode,
561 .read_inode = ext3_read_inode,
562 .write_inode = ext3_write_inode,
563 .dirty_inode = ext3_dirty_inode,
564 .put_inode = ext3_put_inode,
565 .delete_inode = ext3_delete_inode,
566 .put_super = ext3_put_super,
567 .write_super = ext3_write_super,
568 .sync_fs = ext3_sync_fs,
569 .write_super_lockfs = ext3_write_super_lockfs,
570 .unlockfs = ext3_unlockfs,
571 .statfs = ext3_statfs,
572 .remount_fs = ext3_remount,
573 .clear_inode = ext3_clear_inode,
576 struct dentry *ext3_get_parent(struct dentry *child);
577 static struct export_operations ext3_export_ops = {
578 .get_parent = ext3_get_parent,
582 Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid,
583 Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro,
584 Opt_nouid32, Opt_check, Opt_nocheck, Opt_debug, Opt_oldalloc, Opt_orlov,
585 Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl, Opt_noload,
586 Opt_commit, Opt_journal_update, Opt_journal_inum,
587 Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
588 Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
589 Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0,
590 Opt_tagxid, Opt_ignore, Opt_err
593 static match_table_t tokens = {
594 {Opt_bsd_df, "bsddf"},
595 {Opt_minix_df, "minixdf"},
596 {Opt_grpid, "grpid"},
597 {Opt_grpid, "bsdgroups"},
598 {Opt_nogrpid, "nogrpid"},
599 {Opt_nogrpid, "sysvgroups"},
600 {Opt_resgid, "resgid=%u"},
601 {Opt_resuid, "resuid=%u"},
603 {Opt_err_cont, "errors=continue"},
604 {Opt_err_panic, "errors=panic"},
605 {Opt_err_ro, "errors=remount-ro"},
606 {Opt_nouid32, "nouid32"},
607 {Opt_nocheck, "nocheck"},
608 {Opt_nocheck, "check=none"},
609 {Opt_check, "check"},
610 {Opt_debug, "debug"},
611 {Opt_oldalloc, "oldalloc"},
612 {Opt_orlov, "orlov"},
613 {Opt_user_xattr, "user_xattr"},
614 {Opt_nouser_xattr, "nouser_xattr"},
616 {Opt_noacl, "noacl"},
617 {Opt_noload, "noload"},
618 {Opt_commit, "commit=%u"},
619 {Opt_journal_update, "journal=update"},
620 {Opt_journal_inum, "journal=%u"},
621 {Opt_abort, "abort"},
622 {Opt_data_journal, "data=journal"},
623 {Opt_data_ordered, "data=ordered"},
624 {Opt_data_writeback, "data=writeback"},
625 {Opt_offusrjquota, "usrjquota="},
626 {Opt_usrjquota, "usrjquota=%s"},
627 {Opt_offgrpjquota, "grpjquota="},
628 {Opt_grpjquota, "grpjquota=%s"},
629 {Opt_jqfmt_vfsold, "jqfmt=vfsold"},
630 {Opt_jqfmt_vfsv0, "jqfmt=vfsv0"},
631 {Opt_tagxid, "tagxid"},
632 {Opt_ignore, "grpquota"},
633 {Opt_ignore, "noquota"},
634 {Opt_ignore, "quota"},
635 {Opt_ignore, "usrquota"},
639 static unsigned long get_sb_block(void **data)
641 unsigned long sb_block;
642 char *options = (char *) *data;
644 if (!options || strncmp(options, "sb=", 3) != 0)
645 return 1; /* Default location */
647 sb_block = simple_strtoul(options, &options, 0);
648 if (*options && *options != ',') {
649 printk("EXT3-fs: Invalid sb specification: %s\n",
655 *data = (void *) options;
659 static int parse_options (char * options, struct super_block *sb,
660 unsigned long * inum, int is_remount)
662 struct ext3_sb_info *sbi = EXT3_SB(sb);
664 substring_t args[MAX_OPT_ARGS];
674 while ((p = strsep (&options, ",")) != NULL) {
679 token = match_token(p, tokens, args);
682 clear_opt (sbi->s_mount_opt, MINIX_DF);
685 set_opt (sbi->s_mount_opt, MINIX_DF);
688 set_opt (sbi->s_mount_opt, GRPID);
691 clear_opt (sbi->s_mount_opt, GRPID);
694 if (match_int(&args[0], &option))
696 sbi->s_resuid = option;
699 if (match_int(&args[0], &option))
701 sbi->s_resgid = option;
704 /* handled by get_sb_block() instead of here */
705 /* *sb_block = match_int(&args[0]); */
708 clear_opt (sbi->s_mount_opt, ERRORS_CONT);
709 clear_opt (sbi->s_mount_opt, ERRORS_RO);
710 set_opt (sbi->s_mount_opt, ERRORS_PANIC);
713 clear_opt (sbi->s_mount_opt, ERRORS_CONT);
714 clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
715 set_opt (sbi->s_mount_opt, ERRORS_RO);
718 clear_opt (sbi->s_mount_opt, ERRORS_RO);
719 clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
720 set_opt (sbi->s_mount_opt, ERRORS_CONT);
723 set_opt (sbi->s_mount_opt, NO_UID32);
725 #ifndef CONFIG_INOXID_NONE
727 set_opt (sbi->s_mount_opt, TAG_XID);
731 #ifdef CONFIG_EXT3_CHECK
732 set_opt (sbi->s_mount_opt, CHECK);
735 "EXT3 Check option not supported\n");
739 clear_opt (sbi->s_mount_opt, CHECK);
742 set_opt (sbi->s_mount_opt, DEBUG);
745 set_opt (sbi->s_mount_opt, OLDALLOC);
748 clear_opt (sbi->s_mount_opt, OLDALLOC);
750 #ifdef CONFIG_EXT3_FS_XATTR
752 set_opt (sbi->s_mount_opt, XATTR_USER);
754 case Opt_nouser_xattr:
755 clear_opt (sbi->s_mount_opt, XATTR_USER);
759 case Opt_nouser_xattr:
760 printk("EXT3 (no)user_xattr options not supported\n");
763 #ifdef CONFIG_EXT3_FS_POSIX_ACL
765 set_opt(sbi->s_mount_opt, POSIX_ACL);
768 clear_opt(sbi->s_mount_opt, POSIX_ACL);
773 printk("EXT3 (no)acl options not supported\n");
776 case Opt_journal_update:
778 /* Eventually we will want to be able to create
779 a journal file here. For now, only allow the
780 user to specify an existing inode to be the
783 printk(KERN_ERR "EXT3-fs: cannot specify "
784 "journal on remount\n");
787 set_opt (sbi->s_mount_opt, UPDATE_JOURNAL);
789 case Opt_journal_inum:
791 printk(KERN_ERR "EXT3-fs: cannot specify "
792 "journal on remount\n");
795 if (match_int(&args[0], &option))
800 set_opt (sbi->s_mount_opt, NOLOAD);
803 if (match_int(&args[0], &option))
808 option = JBD_DEFAULT_MAX_COMMIT_AGE;
809 sbi->s_commit_interval = HZ * option;
811 case Opt_data_journal:
812 data_opt = EXT3_MOUNT_JOURNAL_DATA;
814 case Opt_data_ordered:
815 data_opt = EXT3_MOUNT_ORDERED_DATA;
817 case Opt_data_writeback:
818 data_opt = EXT3_MOUNT_WRITEBACK_DATA;
821 if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
824 "EXT3-fs: cannot change data "
825 "mode on remount\n");
829 sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS;
830 sbi->s_mount_opt |= data_opt;
840 if (sb_any_quota_enabled(sb)) {
842 "EXT3-fs: Cannot change journalled "
843 "quota options when quota turned on.\n");
846 if (sbi->s_qf_names[qtype]) {
848 "EXT3-fs: %s quota file already "
849 "specified.\n", QTYPE2NAME(qtype));
852 sbi->s_qf_names[qtype] = match_strdup(&args[0]);
853 if (!sbi->s_qf_names[qtype]) {
855 "EXT3-fs: not enough memory for "
856 "storing quotafile name.\n");
859 if (strchr(sbi->s_qf_names[qtype], '/')) {
861 "EXT3-fs: quotafile must be on "
862 "filesystem root.\n");
863 kfree(sbi->s_qf_names[qtype]);
864 sbi->s_qf_names[qtype] = NULL;
868 case Opt_offusrjquota:
871 case Opt_offgrpjquota:
874 if (sb_any_quota_enabled(sb)) {
875 printk(KERN_ERR "EXT3-fs: Cannot change "
876 "journalled quota options when "
877 "quota turned on.\n");
880 if (sbi->s_qf_names[qtype]) {
881 kfree(sbi->s_qf_names[qtype]);
882 sbi->s_qf_names[qtype] = NULL;
885 case Opt_jqfmt_vfsold:
886 sbi->s_jquota_fmt = QFMT_VFS_OLD;
888 case Opt_jqfmt_vfsv0:
889 sbi->s_jquota_fmt = QFMT_VFS_V0;
894 case Opt_offusrjquota:
895 case Opt_offgrpjquota:
896 case Opt_jqfmt_vfsold:
897 case Opt_jqfmt_vfsv0:
899 "EXT3-fs: journalled quota options not "
904 set_opt(sbi->s_mount_opt, ABORT);
910 "EXT3-fs: Unrecognized mount option \"%s\" "
911 "or missing value\n", p);
916 if (!sbi->s_jquota_fmt && (sbi->s_qf_names[USRQUOTA] ||
917 sbi->s_qf_names[GRPQUOTA])) {
919 "EXT3-fs: journalled quota format not specified.\n");
927 static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es,
930 struct ext3_sb_info *sbi = EXT3_SB(sb);
933 if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) {
934 printk (KERN_ERR "EXT3-fs warning: revision level too high, "
935 "forcing read-only mode\n");
940 if (!(sbi->s_mount_state & EXT3_VALID_FS))
941 printk (KERN_WARNING "EXT3-fs warning: mounting unchecked fs, "
942 "running e2fsck is recommended\n");
943 else if ((sbi->s_mount_state & EXT3_ERROR_FS))
945 "EXT3-fs warning: mounting fs with errors, "
946 "running e2fsck is recommended\n");
947 else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
948 le16_to_cpu(es->s_mnt_count) >=
949 (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
951 "EXT3-fs warning: maximal mount count reached, "
952 "running e2fsck is recommended\n");
953 else if (le32_to_cpu(es->s_checkinterval) &&
954 (le32_to_cpu(es->s_lastcheck) +
955 le32_to_cpu(es->s_checkinterval) <= get_seconds()))
957 "EXT3-fs warning: checktime reached, "
958 "running e2fsck is recommended\n");
960 /* @@@ We _will_ want to clear the valid bit if we find
961 inconsistencies, to force a fsck at reboot. But for
962 a plain journaled filesystem we can keep it set as
964 es->s_state = cpu_to_le16(le16_to_cpu(es->s_state) & ~EXT3_VALID_FS);
966 if (!(__s16) le16_to_cpu(es->s_max_mnt_count))
967 es->s_max_mnt_count =
968 (__s16) cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT);
969 es->s_mnt_count=cpu_to_le16(le16_to_cpu(es->s_mnt_count) + 1);
970 es->s_mtime = cpu_to_le32(get_seconds());
971 ext3_update_dynamic_rev(sb);
972 EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
974 ext3_commit_super(sb, es, 1);
975 if (test_opt(sb, DEBUG))
976 printk(KERN_INFO "[EXT3 FS bs=%lu, gc=%lu, "
977 "bpg=%lu, ipg=%lu, mo=%04lx]\n",
980 EXT3_BLOCKS_PER_GROUP(sb),
981 EXT3_INODES_PER_GROUP(sb),
984 printk(KERN_INFO "EXT3 FS on %s, ", sb->s_id);
985 if (EXT3_SB(sb)->s_journal->j_inode == NULL) {
986 char b[BDEVNAME_SIZE];
988 printk("external journal on %s\n",
989 bdevname(EXT3_SB(sb)->s_journal->j_dev, b));
991 printk("internal journal\n");
993 #ifdef CONFIG_EXT3_CHECK
994 if (test_opt (sb, CHECK)) {
995 ext3_check_blocks_bitmap (sb);
996 ext3_check_inodes_bitmap (sb);
1002 static int ext3_check_descriptors (struct super_block * sb)
1004 struct ext3_sb_info *sbi = EXT3_SB(sb);
1005 unsigned long block = le32_to_cpu(sbi->s_es->s_first_data_block);
1006 struct ext3_group_desc * gdp = NULL;
1010 ext3_debug ("Checking group descriptors");
1012 for (i = 0; i < sbi->s_groups_count; i++)
1014 if ((i % EXT3_DESC_PER_BLOCK(sb)) == 0)
1015 gdp = (struct ext3_group_desc *)
1016 sbi->s_group_desc[desc_block++]->b_data;
1017 if (le32_to_cpu(gdp->bg_block_bitmap) < block ||
1018 le32_to_cpu(gdp->bg_block_bitmap) >=
1019 block + EXT3_BLOCKS_PER_GROUP(sb))
1021 ext3_error (sb, "ext3_check_descriptors",
1022 "Block bitmap for group %d"
1023 " not in group (block %lu)!",
1025 le32_to_cpu(gdp->bg_block_bitmap));
1028 if (le32_to_cpu(gdp->bg_inode_bitmap) < block ||
1029 le32_to_cpu(gdp->bg_inode_bitmap) >=
1030 block + EXT3_BLOCKS_PER_GROUP(sb))
1032 ext3_error (sb, "ext3_check_descriptors",
1033 "Inode bitmap for group %d"
1034 " not in group (block %lu)!",
1036 le32_to_cpu(gdp->bg_inode_bitmap));
1039 if (le32_to_cpu(gdp->bg_inode_table) < block ||
1040 le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group >=
1041 block + EXT3_BLOCKS_PER_GROUP(sb))
1043 ext3_error (sb, "ext3_check_descriptors",
1044 "Inode table for group %d"
1045 " not in group (block %lu)!",
1047 le32_to_cpu(gdp->bg_inode_table));
1050 block += EXT3_BLOCKS_PER_GROUP(sb);
1054 sbi->s_es->s_free_blocks_count=cpu_to_le32(ext3_count_free_blocks(sb));
1055 sbi->s_es->s_free_inodes_count=cpu_to_le32(ext3_count_free_inodes(sb));
1060 /* ext3_orphan_cleanup() walks a singly-linked list of inodes (starting at
1061 * the superblock) which were deleted from all directories, but held open by
1062 * a process at the time of a crash. We walk the list and try to delete these
1063 * inodes at recovery time (only with a read-write filesystem).
1065 * In order to keep the orphan inode chain consistent during traversal (in
1066 * case of crash during recovery), we link each inode into the superblock
1067 * orphan list_head and handle it the same way as an inode deletion during
1068 * normal operation (which journals the operations for us).
1070 * We only do an iget() and an iput() on each inode, which is very safe if we
1071 * accidentally point at an in-use or already deleted inode. The worst that
1072 * can happen in this case is that we get a "bit already cleared" message from
1073 * ext3_free_inode(). The only reason we would point at a wrong inode is if
1074 * e2fsck was run on this filesystem, and it must have already done the orphan
1075 * inode cleanup for us, so we can safely abort without any further action.
1077 static void ext3_orphan_cleanup (struct super_block * sb,
1078 struct ext3_super_block * es)
1080 unsigned int s_flags = sb->s_flags;
1081 int nr_orphans = 0, nr_truncates = 0;
1085 if (!es->s_last_orphan) {
1086 jbd_debug(4, "no orphan inodes to clean up\n");
1090 if (EXT3_SB(sb)->s_mount_state & EXT3_ERROR_FS) {
1091 if (es->s_last_orphan)
1092 jbd_debug(1, "Errors on filesystem, "
1093 "clearing orphan list.\n");
1094 es->s_last_orphan = 0;
1095 jbd_debug(1, "Skipping orphan recovery on fs with errors.\n");
1099 if (s_flags & MS_RDONLY) {
1100 printk(KERN_INFO "EXT3-fs: %s: orphan cleanup on readonly fs\n",
1102 sb->s_flags &= ~MS_RDONLY;
1105 /* Needed for iput() to work correctly and not trash data */
1106 sb->s_flags |= MS_ACTIVE;
1107 /* Turn on quotas so that they are updated correctly */
1108 for (i = 0; i < MAXQUOTAS; i++) {
1109 if (EXT3_SB(sb)->s_qf_names[i]) {
1110 int ret = ext3_quota_on_mount(sb, i);
1113 "EXT3-fs: Cannot turn on journalled "
1114 "quota: error %d\n", ret);
1119 while (es->s_last_orphan) {
1120 struct inode *inode;
1123 ext3_orphan_get(sb, le32_to_cpu(es->s_last_orphan)))) {
1124 es->s_last_orphan = 0;
1128 list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan);
1130 if (inode->i_nlink) {
1132 "%s: truncating inode %ld to %Ld bytes\n",
1133 __FUNCTION__, inode->i_ino, inode->i_size);
1134 jbd_debug(2, "truncating inode %ld to %Ld bytes\n",
1135 inode->i_ino, inode->i_size);
1136 ext3_truncate(inode);
1140 "%s: deleting unreferenced inode %ld\n",
1141 __FUNCTION__, inode->i_ino);
1142 jbd_debug(2, "deleting unreferenced inode %ld\n",
1146 iput(inode); /* The delete magic happens here! */
1149 #define PLURAL(x) (x), ((x)==1) ? "" : "s"
1152 printk(KERN_INFO "EXT3-fs: %s: %d orphan inode%s deleted\n",
1153 sb->s_id, PLURAL(nr_orphans));
1155 printk(KERN_INFO "EXT3-fs: %s: %d truncate%s cleaned up\n",
1156 sb->s_id, PLURAL(nr_truncates));
1158 /* Turn quotas off */
1159 for (i = 0; i < MAXQUOTAS; i++) {
1160 if (sb_dqopt(sb)->files[i])
1161 ext3_quota_off_mount(sb, i);
1164 sb->s_flags = s_flags; /* Restore MS_RDONLY status */
1167 #define log2(n) ffz(~(n))
1170 * Maximal file size. There is a direct, and {,double-,triple-}indirect
1171 * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
1172 * We need to be 1 filesystem block less than the 2^32 sector limit.
1174 static loff_t ext3_max_size(int bits)
1176 loff_t res = EXT3_NDIR_BLOCKS;
1177 res += 1LL << (bits-2);
1178 res += 1LL << (2*(bits-2));
1179 res += 1LL << (3*(bits-2));
1181 if (res > (512LL << 32) - (1 << bits))
1182 res = (512LL << 32) - (1 << bits);
1186 static unsigned long descriptor_loc(struct super_block *sb,
1187 unsigned long logic_sb_block,
1190 struct ext3_sb_info *sbi = EXT3_SB(sb);
1191 unsigned long bg, first_data_block, first_meta_bg;
1194 first_data_block = le32_to_cpu(sbi->s_es->s_first_data_block);
1195 first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg);
1197 if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_META_BG) ||
1199 return (logic_sb_block + nr + 1);
1200 bg = sbi->s_desc_per_block * nr;
1201 if (ext3_bg_has_super(sb, bg))
1203 return (first_data_block + has_super + (bg * sbi->s_blocks_per_group));
1207 static int ext3_fill_super (struct super_block *sb, void *data, int silent)
1209 struct buffer_head * bh;
1210 struct ext3_super_block *es = NULL;
1211 struct ext3_sb_info *sbi;
1212 unsigned long block;
1213 unsigned long sb_block = get_sb_block(&data);
1214 unsigned long logic_sb_block;
1215 unsigned long offset = 0;
1216 unsigned long journal_inum = 0;
1217 unsigned long def_mount_opts;
1225 sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
1228 sb->s_fs_info = sbi;
1229 memset(sbi, 0, sizeof(*sbi));
1230 sbi->s_mount_opt = 0;
1231 sbi->s_resuid = EXT3_DEF_RESUID;
1232 sbi->s_resgid = EXT3_DEF_RESGID;
1234 blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE);
1236 printk(KERN_ERR "EXT3-fs: unable to set blocksize\n");
1241 * The ext3 superblock will not be buffer aligned for other than 1kB
1242 * block sizes. We need to calculate the offset from buffer start.
1244 if (blocksize != EXT3_MIN_BLOCK_SIZE) {
1245 logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize;
1246 offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
1248 logic_sb_block = sb_block;
1251 if (!(bh = sb_bread(sb, logic_sb_block))) {
1252 printk (KERN_ERR "EXT3-fs: unable to read superblock\n");
1256 * Note: s_es must be initialized as soon as possible because
1257 * some ext3 macro-instructions depend on its value
1259 es = (struct ext3_super_block *) (((char *)bh->b_data) + offset);
1261 sb->s_magic = le16_to_cpu(es->s_magic);
1262 if (sb->s_magic != EXT3_SUPER_MAGIC) {
1265 "VFS: Can't find ext3 filesystem on dev %s.\n",
1270 /* Set defaults before we parse the mount options */
1271 def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
1272 if (def_mount_opts & EXT3_DEFM_DEBUG)
1273 set_opt(sbi->s_mount_opt, DEBUG);
1274 if (def_mount_opts & EXT3_DEFM_BSDGROUPS)
1275 set_opt(sbi->s_mount_opt, GRPID);
1276 if (def_mount_opts & EXT3_DEFM_UID16)
1277 set_opt(sbi->s_mount_opt, NO_UID32);
1278 if (def_mount_opts & EXT3_DEFM_XATTR_USER)
1279 set_opt(sbi->s_mount_opt, XATTR_USER);
1280 if (def_mount_opts & EXT3_DEFM_ACL)
1281 set_opt(sbi->s_mount_opt, POSIX_ACL);
1282 if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_DATA)
1283 sbi->s_mount_opt |= EXT3_MOUNT_JOURNAL_DATA;
1284 else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_ORDERED)
1285 sbi->s_mount_opt |= EXT3_MOUNT_ORDERED_DATA;
1286 else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_WBACK)
1287 sbi->s_mount_opt |= EXT3_MOUNT_WRITEBACK_DATA;
1289 if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_PANIC)
1290 set_opt(sbi->s_mount_opt, ERRORS_PANIC);
1291 else if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_RO)
1292 set_opt(sbi->s_mount_opt, ERRORS_RO);
1294 sbi->s_resuid = le16_to_cpu(es->s_def_resuid);
1295 sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
1297 if (!parse_options ((char *) data, sb, &journal_inum, 0))
1300 if (EXT3_SB(sb)->s_mount_opt & EXT3_MOUNT_TAG_XID)
1301 sb->s_flags |= MS_TAGXID;
1302 sb->s_flags |= MS_ONE_SECOND;
1303 sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
1304 ((sbi->s_mount_opt & EXT3_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
1306 if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV &&
1307 (EXT3_HAS_COMPAT_FEATURE(sb, ~0U) ||
1308 EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
1309 EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U)))
1311 "EXT3-fs warning: feature flags set on rev 0 fs, "
1312 "running e2fsck is recommended\n");
1314 * Check feature flags regardless of the revision level, since we
1315 * previously didn't change the revision level when setting the flags,
1316 * so there is a chance incompat flags are set on a rev 0 filesystem.
1318 if ((i = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP))) {
1319 printk(KERN_ERR "EXT3-fs: %s: couldn't mount because of "
1320 "unsupported optional features (%x).\n",
1324 if (!(sb->s_flags & MS_RDONLY) &&
1325 (i = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP))){
1326 printk(KERN_ERR "EXT3-fs: %s: couldn't mount RDWR because of "
1327 "unsupported optional features (%x).\n",
1331 blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
1333 if (blocksize < EXT3_MIN_BLOCK_SIZE ||
1334 blocksize > EXT3_MAX_BLOCK_SIZE) {
1336 "EXT3-fs: Unsupported filesystem blocksize %d on %s.\n",
1337 blocksize, sb->s_id);
1341 hblock = bdev_hardsect_size(sb->s_bdev);
1342 if (sb->s_blocksize != blocksize) {
1344 * Make sure the blocksize for the filesystem is larger
1345 * than the hardware sectorsize for the machine.
1347 if (blocksize < hblock) {
1348 printk(KERN_ERR "EXT3-fs: blocksize %d too small for "
1349 "device blocksize %d.\n", blocksize, hblock);
1354 sb_set_blocksize(sb, blocksize);
1355 logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize;
1356 offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
1357 bh = sb_bread(sb, logic_sb_block);
1360 "EXT3-fs: Can't read superblock on 2nd try.\n");
1363 es = (struct ext3_super_block *)(((char *)bh->b_data) + offset);
1365 if (es->s_magic != le16_to_cpu(EXT3_SUPER_MAGIC)) {
1367 "EXT3-fs: Magic mismatch, very weird !\n");
1372 sb->s_maxbytes = ext3_max_size(sb->s_blocksize_bits);
1374 if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV) {
1375 sbi->s_inode_size = EXT3_GOOD_OLD_INODE_SIZE;
1376 sbi->s_first_ino = EXT3_GOOD_OLD_FIRST_INO;
1378 sbi->s_inode_size = le16_to_cpu(es->s_inode_size);
1379 sbi->s_first_ino = le32_to_cpu(es->s_first_ino);
1380 if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) ||
1381 (sbi->s_inode_size & (sbi->s_inode_size - 1)) ||
1382 (sbi->s_inode_size > blocksize)) {
1384 "EXT3-fs: unsupported inode size: %d\n",
1389 sbi->s_frag_size = EXT3_MIN_FRAG_SIZE <<
1390 le32_to_cpu(es->s_log_frag_size);
1391 if (blocksize != sbi->s_frag_size) {
1393 "EXT3-fs: fragsize %lu != blocksize %u (unsupported)\n",
1394 sbi->s_frag_size, blocksize);
1397 sbi->s_frags_per_block = 1;
1398 sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
1399 sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group);
1400 sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
1401 sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb);
1402 sbi->s_itb_per_group = sbi->s_inodes_per_group /sbi->s_inodes_per_block;
1403 sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc);
1405 sbi->s_mount_state = le16_to_cpu(es->s_state);
1406 sbi->s_addr_per_block_bits = log2(EXT3_ADDR_PER_BLOCK(sb));
1407 sbi->s_desc_per_block_bits = log2(EXT3_DESC_PER_BLOCK(sb));
1408 for (i=0; i < 4; i++)
1409 sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
1410 sbi->s_def_hash_version = es->s_def_hash_version;
1412 if (sbi->s_blocks_per_group > blocksize * 8) {
1414 "EXT3-fs: #blocks per group too big: %lu\n",
1415 sbi->s_blocks_per_group);
1418 if (sbi->s_frags_per_group > blocksize * 8) {
1420 "EXT3-fs: #fragments per group too big: %lu\n",
1421 sbi->s_frags_per_group);
1424 if (sbi->s_inodes_per_group > blocksize * 8) {
1426 "EXT3-fs: #inodes per group too big: %lu\n",
1427 sbi->s_inodes_per_group);
1431 sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) -
1432 le32_to_cpu(es->s_first_data_block) +
1433 EXT3_BLOCKS_PER_GROUP(sb) - 1) /
1434 EXT3_BLOCKS_PER_GROUP(sb);
1435 db_count = (sbi->s_groups_count + EXT3_DESC_PER_BLOCK(sb) - 1) /
1436 EXT3_DESC_PER_BLOCK(sb);
1437 sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
1439 if (sbi->s_group_desc == NULL) {
1440 printk (KERN_ERR "EXT3-fs: not enough memory\n");
1443 sbi->s_debts = kmalloc(sbi->s_groups_count * sizeof(u8),
1445 if (!sbi->s_debts) {
1446 printk("EXT3-fs: not enough memory to allocate s_bgi\n");
1449 memset(sbi->s_debts, 0, sbi->s_groups_count * sizeof(u8));
1451 percpu_counter_init(&sbi->s_freeblocks_counter);
1452 percpu_counter_init(&sbi->s_freeinodes_counter);
1453 percpu_counter_init(&sbi->s_dirs_counter);
1454 bgl_lock_init(&sbi->s_blockgroup_lock);
1456 for (i = 0; i < db_count; i++) {
1457 block = descriptor_loc(sb, logic_sb_block, i);
1458 sbi->s_group_desc[i] = sb_bread(sb, block);
1459 if (!sbi->s_group_desc[i]) {
1460 printk (KERN_ERR "EXT3-fs: "
1461 "can't read group descriptor %d\n", i);
1466 if (!ext3_check_descriptors (sb)) {
1467 printk (KERN_ERR "EXT3-fs: group descriptors corrupted !\n");
1470 sbi->s_gdb_count = db_count;
1471 get_random_bytes(&sbi->s_next_generation, sizeof(u32));
1472 spin_lock_init(&sbi->s_next_gen_lock);
1474 * set up enough so that it can read an inode
1476 sb->s_op = &ext3_sops;
1477 sb->s_export_op = &ext3_export_ops;
1479 sb->s_qcop = &ext3_qctl_operations;
1480 sb->dq_op = &ext3_quota_operations;
1482 INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */
1486 needs_recovery = (es->s_last_orphan != 0 ||
1487 EXT3_HAS_INCOMPAT_FEATURE(sb,
1488 EXT3_FEATURE_INCOMPAT_RECOVER));
1491 * The first inode we look at is the journal inode. Don't try
1492 * root first: it may be modified in the journal!
1494 if (!test_opt(sb, NOLOAD) &&
1495 EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) {
1496 if (ext3_load_journal(sb, es))
1498 } else if (journal_inum) {
1499 if (ext3_create_journal(sb, es, journal_inum))
1504 "ext3: No journal on filesystem on %s\n",
1509 /* We have now updated the journal if required, so we can
1510 * validate the data journaling mode. */
1511 switch (test_opt(sb, DATA_FLAGS)) {
1513 /* No mode set, assume a default based on the journal
1514 capabilities: ORDERED_DATA if the journal can
1515 cope, else JOURNAL_DATA */
1516 if (journal_check_available_features
1517 (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE))
1518 set_opt(sbi->s_mount_opt, ORDERED_DATA);
1520 set_opt(sbi->s_mount_opt, JOURNAL_DATA);
1523 case EXT3_MOUNT_ORDERED_DATA:
1524 case EXT3_MOUNT_WRITEBACK_DATA:
1525 if (!journal_check_available_features
1526 (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) {
1527 printk(KERN_ERR "EXT3-fs: Journal does not support "
1528 "requested data journaling mode\n");
1536 * The journal_load will have done any necessary log recovery,
1537 * so we can safely mount the rest of the filesystem now.
1540 root = iget(sb, EXT3_ROOT_INO);
1541 sb->s_root = d_alloc_root(root);
1543 printk(KERN_ERR "EXT3-fs: get root inode failed\n");
1547 if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
1550 printk(KERN_ERR "EXT3-fs: corrupt root inode, run e2fsck\n");
1554 ext3_setup_super (sb, es, sb->s_flags & MS_RDONLY);
1556 * akpm: core read_super() calls in here with the superblock locked.
1557 * That deadlocks, because orphan cleanup needs to lock the superblock
1558 * in numerous places. Here we just pop the lock - it's relatively
1559 * harmless, because we are now ready to accept write_super() requests,
1560 * and aviro says that's the only reason for hanging onto the
1563 EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS;
1564 ext3_orphan_cleanup(sb, es);
1565 EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS;
1567 printk (KERN_INFO "EXT3-fs: recovery complete.\n");
1568 ext3_mark_recovery_complete(sb, es);
1569 printk (KERN_INFO "EXT3-fs: mounted filesystem with %s data mode.\n",
1570 test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal":
1571 test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered":
1574 percpu_counter_mod(&sbi->s_freeblocks_counter,
1575 ext3_count_free_blocks(sb));
1576 percpu_counter_mod(&sbi->s_freeinodes_counter,
1577 ext3_count_free_inodes(sb));
1578 percpu_counter_mod(&sbi->s_dirs_counter,
1579 ext3_count_dirs(sb));
1584 journal_destroy(sbi->s_journal);
1586 kfree(sbi->s_debts);
1587 for (i = 0; i < db_count; i++)
1588 brelse(sbi->s_group_desc[i]);
1589 kfree(sbi->s_group_desc);
1592 for (i = 0; i < MAXQUOTAS; i++) {
1593 if (sbi->s_qf_names[i])
1594 kfree(sbi->s_qf_names[i]);
1597 ext3_blkdev_remove(sbi);
1600 sb->s_fs_info = NULL;
1606 * Setup any per-fs journal parameters now. We'll do this both on
1607 * initial mount, once the journal has been initialised but before we've
1608 * done any recovery; and again on any subsequent remount.
1610 static void ext3_init_journal_params(struct ext3_sb_info *sbi,
1613 if (sbi->s_commit_interval)
1614 journal->j_commit_interval = sbi->s_commit_interval;
1615 /* We could also set up an ext3-specific default for the commit
1616 * interval here, but for now we'll just fall back to the jbd
1621 static journal_t *ext3_get_journal(struct super_block *sb, int journal_inum)
1623 struct inode *journal_inode;
1626 /* First, test for the existence of a valid inode on disk. Bad
1627 * things happen if we iget() an unused inode, as the subsequent
1628 * iput() will try to delete it. */
1630 journal_inode = iget(sb, journal_inum);
1631 if (!journal_inode) {
1632 printk(KERN_ERR "EXT3-fs: no journal found.\n");
1635 if (!journal_inode->i_nlink) {
1636 make_bad_inode(journal_inode);
1637 iput(journal_inode);
1638 printk(KERN_ERR "EXT3-fs: journal inode is deleted.\n");
1642 jbd_debug(2, "Journal inode found at %p: %Ld bytes\n",
1643 journal_inode, journal_inode->i_size);
1644 if (is_bad_inode(journal_inode) || !S_ISREG(journal_inode->i_mode)) {
1645 printk(KERN_ERR "EXT3-fs: invalid journal inode.\n");
1646 iput(journal_inode);
1650 journal = journal_init_inode(journal_inode);
1652 printk(KERN_ERR "EXT3-fs: Could not load journal inode\n");
1653 iput(journal_inode);
1656 journal->j_private = sb;
1657 ext3_init_journal_params(EXT3_SB(sb), journal);
1661 static journal_t *ext3_get_dev_journal(struct super_block *sb,
1664 struct buffer_head * bh;
1668 int hblock, blocksize;
1669 unsigned long sb_block;
1670 unsigned long offset;
1671 struct ext3_super_block * es;
1672 struct block_device *bdev;
1674 bdev = ext3_blkdev_get(j_dev);
1678 if (bd_claim(bdev, sb)) {
1680 "EXT3: failed to claim external journal device.\n");
1685 blocksize = sb->s_blocksize;
1686 hblock = bdev_hardsect_size(bdev);
1687 if (blocksize < hblock) {
1689 "EXT3-fs: blocksize too small for journal device.\n");
1693 sb_block = EXT3_MIN_BLOCK_SIZE / blocksize;
1694 offset = EXT3_MIN_BLOCK_SIZE % blocksize;
1695 set_blocksize(bdev, blocksize);
1696 if (!(bh = __bread(bdev, sb_block, blocksize))) {
1697 printk(KERN_ERR "EXT3-fs: couldn't read superblock of "
1698 "external journal\n");
1702 es = (struct ext3_super_block *) (((char *)bh->b_data) + offset);
1703 if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) ||
1704 !(le32_to_cpu(es->s_feature_incompat) &
1705 EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) {
1706 printk(KERN_ERR "EXT3-fs: external journal has "
1707 "bad superblock\n");
1712 if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
1713 printk(KERN_ERR "EXT3-fs: journal UUID does not match\n");
1718 len = le32_to_cpu(es->s_blocks_count);
1719 start = sb_block + 1;
1720 brelse(bh); /* we're done with the superblock */
1722 journal = journal_init_dev(bdev, sb->s_bdev,
1723 start, len, blocksize);
1725 printk(KERN_ERR "EXT3-fs: failed to create device journal\n");
1728 journal->j_private = sb;
1729 ll_rw_block(READ, 1, &journal->j_sb_buffer);
1730 wait_on_buffer(journal->j_sb_buffer);
1731 if (!buffer_uptodate(journal->j_sb_buffer)) {
1732 printk(KERN_ERR "EXT3-fs: I/O error on journal device\n");
1735 if (ntohl(journal->j_superblock->s_nr_users) != 1) {
1736 printk(KERN_ERR "EXT3-fs: External journal has more than one "
1737 "user (unsupported) - %d\n",
1738 ntohl(journal->j_superblock->s_nr_users));
1741 EXT3_SB(sb)->journal_bdev = bdev;
1742 ext3_init_journal_params(EXT3_SB(sb), journal);
1745 journal_destroy(journal);
1747 ext3_blkdev_put(bdev);
1751 static int ext3_load_journal(struct super_block * sb,
1752 struct ext3_super_block * es)
1755 int journal_inum = le32_to_cpu(es->s_journal_inum);
1756 dev_t journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
1758 int really_read_only;
1760 really_read_only = bdev_read_only(sb->s_bdev);
1763 * Are we loading a blank journal or performing recovery after a
1764 * crash? For recovery, we need to check in advance whether we
1765 * can get read-write access to the device.
1768 if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) {
1769 if (sb->s_flags & MS_RDONLY) {
1770 printk(KERN_INFO "EXT3-fs: INFO: recovery "
1771 "required on readonly filesystem.\n");
1772 if (really_read_only) {
1773 printk(KERN_ERR "EXT3-fs: write access "
1774 "unavailable, cannot proceed.\n");
1777 printk (KERN_INFO "EXT3-fs: write access will "
1778 "be enabled during recovery.\n");
1782 if (journal_inum && journal_dev) {
1783 printk(KERN_ERR "EXT3-fs: filesystem has both journal "
1784 "and inode journals!\n");
1789 if (!(journal = ext3_get_journal(sb, journal_inum)))
1792 if (!(journal = ext3_get_dev_journal(sb, journal_dev)))
1796 if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
1797 err = journal_update_format(journal);
1799 printk(KERN_ERR "EXT3-fs: error updating journal.\n");
1800 journal_destroy(journal);
1805 if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER))
1806 err = journal_wipe(journal, !really_read_only);
1808 err = journal_load(journal);
1811 printk(KERN_ERR "EXT3-fs: error loading journal.\n");
1812 journal_destroy(journal);
1816 EXT3_SB(sb)->s_journal = journal;
1817 ext3_clear_journal_err(sb, es);
1821 static int ext3_create_journal(struct super_block * sb,
1822 struct ext3_super_block * es,
1827 if (sb->s_flags & MS_RDONLY) {
1828 printk(KERN_ERR "EXT3-fs: readonly filesystem when trying to "
1829 "create journal.\n");
1833 if (!(journal = ext3_get_journal(sb, journal_inum)))
1836 printk(KERN_INFO "EXT3-fs: creating new journal on inode %d\n",
1839 if (journal_create(journal)) {
1840 printk(KERN_ERR "EXT3-fs: error creating journal.\n");
1841 journal_destroy(journal);
1845 EXT3_SB(sb)->s_journal = journal;
1847 ext3_update_dynamic_rev(sb);
1848 EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
1849 EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL);
1851 es->s_journal_inum = cpu_to_le32(journal_inum);
1854 /* Make sure we flush the recovery flag to disk. */
1855 ext3_commit_super(sb, es, 1);
1860 static void ext3_commit_super (struct super_block * sb,
1861 struct ext3_super_block * es,
1864 struct buffer_head *sbh = EXT3_SB(sb)->s_sbh;
1868 es->s_wtime = cpu_to_le32(get_seconds());
1869 es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb));
1870 es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb));
1871 BUFFER_TRACE(sbh, "marking dirty");
1872 mark_buffer_dirty(sbh);
1874 sync_dirty_buffer(sbh);
1879 * Have we just finished recovery? If so, and if we are mounting (or
1880 * remounting) the filesystem readonly, then we will end up with a
1881 * consistent fs on disk. Record that fact.
1883 static void ext3_mark_recovery_complete(struct super_block * sb,
1884 struct ext3_super_block * es)
1886 journal_t *journal = EXT3_SB(sb)->s_journal;
1888 journal_lock_updates(journal);
1889 journal_flush(journal);
1890 if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) &&
1891 sb->s_flags & MS_RDONLY) {
1892 EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
1894 ext3_commit_super(sb, es, 1);
1896 journal_unlock_updates(journal);
1900 * If we are mounting (or read-write remounting) a filesystem whose journal
1901 * has recorded an error from a previous lifetime, move that error to the
1902 * main filesystem now.
1904 static void ext3_clear_journal_err(struct super_block * sb,
1905 struct ext3_super_block * es)
1911 journal = EXT3_SB(sb)->s_journal;
1914 * Now check for any error status which may have been recorded in the
1915 * journal by a prior ext3_error() or ext3_abort()
1918 j_errno = journal_errno(journal);
1922 errstr = ext3_decode_error(sb, j_errno, nbuf);
1923 ext3_warning(sb, __FUNCTION__, "Filesystem error recorded "
1924 "from previous mount: %s", errstr);
1925 ext3_warning(sb, __FUNCTION__, "Marking fs in need of "
1926 "filesystem check.");
1928 EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
1929 es->s_state |= cpu_to_le16(EXT3_ERROR_FS);
1930 ext3_commit_super (sb, es, 1);
1932 journal_clear_err(journal);
1937 * Force the running and committing transactions to commit,
1938 * and wait on the commit.
1940 int ext3_force_commit(struct super_block *sb)
1945 if (sb->s_flags & MS_RDONLY)
1948 journal = EXT3_SB(sb)->s_journal;
1950 ret = ext3_journal_force_commit(journal);
1955 * Ext3 always journals updates to the superblock itself, so we don't
1956 * have to propagate any other updates to the superblock on disk at this
1957 * point. Just start an async writeback to get the buffers on their way
1960 * This implicitly triggers the writebehind on sync().
1963 void ext3_write_super (struct super_block * sb)
1965 if (down_trylock(&sb->s_lock) == 0)
1970 static int ext3_sync_fs(struct super_block *sb, int wait)
1975 if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) {
1977 log_wait_commit(EXT3_SB(sb)->s_journal, target);
1983 * LVM calls this function before a (read-only) snapshot is created. This
1984 * gives us a chance to flush the journal completely and mark the fs clean.
1986 void ext3_write_super_lockfs(struct super_block *sb)
1990 if (!(sb->s_flags & MS_RDONLY)) {
1991 journal_t *journal = EXT3_SB(sb)->s_journal;
1993 /* Now we set up the journal barrier. */
1994 journal_lock_updates(journal);
1995 journal_flush(journal);
1997 /* Journal blocked and flushed, clear needs_recovery flag. */
1998 EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
1999 ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1);
2004 * Called by LVM after the snapshot is done. We need to reset the RECOVER
2005 * flag here, even though the filesystem is not technically dirty yet.
2007 void ext3_unlockfs(struct super_block *sb)
2009 if (!(sb->s_flags & MS_RDONLY)) {
2011 /* Reser the needs_recovery flag before the fs is unlocked. */
2012 EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
2013 ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1);
2015 journal_unlock_updates(EXT3_SB(sb)->s_journal);
2019 int ext3_remount (struct super_block * sb, int * flags, char * data)
2021 struct ext3_super_block * es;
2022 struct ext3_sb_info *sbi = EXT3_SB(sb);
2026 * Allow the "check" option to be passed as a remount option.
2028 if (!parse_options(data, sb, &tmp, 1))
2031 if (sbi->s_mount_opt & EXT3_MOUNT_ABORT)
2032 ext3_abort(sb, __FUNCTION__, "Abort forced by user");
2034 sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
2035 ((sbi->s_mount_opt & EXT3_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
2039 ext3_init_journal_params(sbi, sbi->s_journal);
2041 if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY)) {
2042 if (sbi->s_mount_opt & EXT3_MOUNT_ABORT)
2045 if (*flags & MS_RDONLY) {
2047 * First of all, the unconditional stuff we have to do
2048 * to disable replay of the journal when we next remount
2050 sb->s_flags |= MS_RDONLY;
2053 * OK, test if we are remounting a valid rw partition
2054 * readonly, and if so set the rdonly flag and then
2055 * mark the partition as valid again.
2057 if (!(es->s_state & cpu_to_le16(EXT3_VALID_FS)) &&
2058 (sbi->s_mount_state & EXT3_VALID_FS))
2059 es->s_state = cpu_to_le16(sbi->s_mount_state);
2061 ext3_mark_recovery_complete(sb, es);
2064 if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb,
2065 ~EXT3_FEATURE_RO_COMPAT_SUPP))) {
2066 printk(KERN_WARNING "EXT3-fs: %s: couldn't "
2067 "remount RDWR because of unsupported "
2068 "optional features (%x).\n",
2073 * Mounting a RDONLY partition read-write, so reread
2074 * and store the current valid flag. (It may have
2075 * been changed by e2fsck since we originally mounted
2078 ext3_clear_journal_err(sb, es);
2079 sbi->s_mount_state = le16_to_cpu(es->s_state);
2080 if (!ext3_setup_super (sb, es, 0))
2081 sb->s_flags &= ~MS_RDONLY;
2087 int ext3_statfs (struct super_block * sb, struct kstatfs * buf)
2089 struct ext3_super_block *es = EXT3_SB(sb)->s_es;
2090 unsigned long overhead;
2093 if (test_opt (sb, MINIX_DF))
2097 * Compute the overhead (FS structures)
2101 * All of the blocks before first_data_block are
2104 overhead = le32_to_cpu(es->s_first_data_block);
2107 * Add the overhead attributed to the superblock and
2108 * block group descriptors. If the sparse superblocks
2109 * feature is turned on, then not all groups have this.
2111 for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++)
2112 overhead += ext3_bg_has_super(sb, i) +
2113 ext3_bg_num_gdb(sb, i);
2116 * Every block group has an inode bitmap, a block
2117 * bitmap, and an inode table.
2119 overhead += (EXT3_SB(sb)->s_groups_count *
2120 (2 + EXT3_SB(sb)->s_itb_per_group));
2123 buf->f_type = EXT3_SUPER_MAGIC;
2124 buf->f_bsize = sb->s_blocksize;
2125 buf->f_blocks = le32_to_cpu(es->s_blocks_count) - overhead;
2126 buf->f_bfree = ext3_count_free_blocks (sb);
2127 buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count);
2128 if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count))
2130 buf->f_files = le32_to_cpu(es->s_inodes_count);
2131 buf->f_ffree = ext3_count_free_inodes (sb);
2132 buf->f_namelen = EXT3_NAME_LEN;
2136 /* Helper function for writing quotas on sync - we need to start transaction before quota file
2137 * is locked for write. Otherwise the are possible deadlocks:
2138 * Process 1 Process 2
2139 * ext3_create() quota_sync()
2140 * journal_start() write_dquot()
2141 * DQUOT_INIT() down(dqio_sem)
2142 * down(dqio_sem) journal_start()
2148 static inline struct inode *dquot_to_inode(struct dquot *dquot)
2150 return sb_dqopt(dquot->dq_sb)->files[dquot->dq_type]->f_dentry->d_inode;
2153 static int ext3_dquot_initialize(struct inode *inode, int type)
2158 /* We may create quota structure so we need to reserve enough blocks */
2159 handle = ext3_journal_start(inode, 2*EXT3_QUOTA_INIT_BLOCKS);
2161 return PTR_ERR(handle);
2162 ret = dquot_initialize(inode, type);
2163 err = ext3_journal_stop(handle);
2169 static int ext3_dquot_drop(struct inode *inode)
2174 /* We may delete quota structure so we need to reserve enough blocks */
2175 handle = ext3_journal_start(inode, 2*EXT3_QUOTA_INIT_BLOCKS);
2177 return PTR_ERR(handle);
2178 ret = dquot_drop(inode);
2179 err = ext3_journal_stop(handle);
2185 static int ext3_write_dquot(struct dquot *dquot)
2190 handle = ext3_journal_start(dquot_to_inode(dquot),
2191 EXT3_QUOTA_TRANS_BLOCKS);
2193 return PTR_ERR(handle);
2194 ret = dquot_commit(dquot);
2195 err = ext3_journal_stop(handle);
2201 static int ext3_acquire_dquot(struct dquot *dquot)
2206 handle = ext3_journal_start(dquot_to_inode(dquot),
2207 EXT3_QUOTA_INIT_BLOCKS);
2209 return PTR_ERR(handle);
2210 ret = dquot_acquire(dquot);
2211 err = ext3_journal_stop(handle);
2217 static int ext3_release_dquot(struct dquot *dquot)
2222 handle = ext3_journal_start(dquot_to_inode(dquot),
2223 EXT3_QUOTA_INIT_BLOCKS);
2225 return PTR_ERR(handle);
2226 ret = dquot_release(dquot);
2227 err = ext3_journal_stop(handle);
2233 static int ext3_mark_dquot_dirty(struct dquot *dquot)
2235 /* Are we journalling quotas? */
2236 if (EXT3_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] ||
2237 EXT3_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) {
2238 dquot_mark_dquot_dirty(dquot);
2239 return ext3_write_dquot(dquot);
2241 return dquot_mark_dquot_dirty(dquot);
2245 static int ext3_write_info(struct super_block *sb, int type)
2250 /* Data block + inode block */
2251 handle = ext3_journal_start(sb->s_root->d_inode, 2);
2253 return PTR_ERR(handle);
2254 ret = dquot_commit_info(sb, type);
2255 err = ext3_journal_stop(handle);
2262 * Turn on quotas during mount time - we need to find
2263 * the quota file and such...
2265 static int ext3_quota_on_mount(struct super_block *sb, int type)
2268 struct dentry *dentry;
2269 struct qstr name = { .name = EXT3_SB(sb)->s_qf_names[type],
2271 .len = strlen(EXT3_SB(sb)->s_qf_names[type])};
2273 dentry = lookup_hash(&name, sb->s_root);
2275 return PTR_ERR(dentry);
2276 err = vfs_quota_on_mount(type, EXT3_SB(sb)->s_jquota_fmt, dentry);
2279 /* We keep the dentry reference if everything went ok - we drop it
2280 * on quota_off time */
2284 /* Turn quotas off during mount time */
2285 static int ext3_quota_off_mount(struct super_block *sb, int type)
2288 struct dentry *dentry;
2290 dentry = sb_dqopt(sb)->files[type]->f_dentry;
2291 err = vfs_quota_off_mount(sb, type);
2292 /* We invalidate dentry - it has at least wrong hash... */
2293 d_invalidate(dentry);
2299 * Standard function to be called on quota_on
2301 static int ext3_quota_on(struct super_block *sb, int type, int format_id,
2305 struct nameidata nd;
2307 /* Not journalling quota? */
2308 if (!EXT3_SB(sb)->s_qf_names[USRQUOTA] &&
2309 !EXT3_SB(sb)->s_qf_names[GRPQUOTA])
2310 return vfs_quota_on(sb, type, format_id, path);
2311 err = path_lookup(path, LOOKUP_FOLLOW, &nd);
2314 /* Quotafile not on the same filesystem? */
2315 if (nd.mnt->mnt_sb != sb)
2317 /* Quotafile not of fs root? */
2318 if (nd.dentry->d_parent->d_inode != sb->s_root->d_inode)
2320 "EXT3-fs: Quota file not on filesystem root. "
2321 "Journalled quota will not work.\n");
2322 if (!ext3_should_journal_data(nd.dentry->d_inode))
2323 printk(KERN_WARNING "EXT3-fs: Quota file does not have "
2324 "data-journalling. Journalled quota will not work.\n");
2326 return vfs_quota_on(sb, type, format_id, path);
2331 static struct super_block *ext3_get_sb(struct file_system_type *fs_type,
2332 int flags, const char *dev_name, void *data)
2334 return get_sb_bdev(fs_type, flags, dev_name, data, ext3_fill_super);
2337 static struct file_system_type ext3_fs_type = {
2338 .owner = THIS_MODULE,
2340 .get_sb = ext3_get_sb,
2341 .kill_sb = kill_block_super,
2342 .fs_flags = FS_REQUIRES_DEV,
2345 static int __init init_ext3_fs(void)
2347 int err = init_ext3_xattr();
2350 err = init_inodecache();
2353 err = register_filesystem(&ext3_fs_type);
2358 destroy_inodecache();
2364 static void __exit exit_ext3_fs(void)
2366 unregister_filesystem(&ext3_fs_type);
2367 destroy_inodecache();
2371 MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others");
2372 MODULE_DESCRIPTION("Second Extended Filesystem with journaling extensions");
2373 MODULE_LICENSE("GPL");
2374 module_init(init_ext3_fs)
2375 module_exit(exit_ext3_fs)