Implement new statistics format in kernel and userspace switches.
[sliver-openvswitch.git] / include / openflow.h
1 /* Copyright (c) 2008 The Board of Trustees of The Leland Stanford
2  * Junior University
3  * 
4  * We are making the OpenFlow specification and associated documentation
5  * (Software) available for public use and benefit with the expectation
6  * that others will use, modify and enhance the Software and contribute
7  * those enhancements back to the community. However, since we would
8  * like to make the Software available for broadest use, with as few
9  * restrictions as possible permission is hereby granted, free of
10  * charge, to any person obtaining a copy of this Software to deal in
11  * the Software under the copyrights without restriction, including
12  * without limitation the rights to use, copy, modify, merge, publish,
13  * distribute, sublicense, and/or sell copies of the Software, and to
14  * permit persons to whom the Software is furnished to do so, subject to
15  * the following conditions:
16  * 
17  * The above copyright notice and this permission notice shall be
18  * included in all copies or substantial portions of the Software.
19  * 
20  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
21  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
23  * NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
24  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
25  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
26  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
27  * SOFTWARE.
28  * 
29  * The name and trademarks of copyright holder(s) may NOT be used in
30  * advertising or publicity pertaining to the Software or any
31  * derivatives without specific, written prior permission.
32  */
33
34 /* OpenFlow: protocol between controller and datapath. */
35
36 #ifndef OPENFLOW_H
37 #define OPENFLOW_H 1
38
39 #ifdef __KERNEL__
40 #include <linux/types.h>
41 #else
42 #include <stdint.h>
43 #endif
44
45 /* Maximum length of a OpenFlow packet. */
46 #define OFP_MAXLEN (sizeof(struct ofp_switch_features) \
47         + (sizeof(struct ofp_phy_port) * OFPP_MAX) + 200)
48
49
50 /* The most significant bit being set in the version field indicates an
51  * experimental OpenFlow version.  
52  */
53 #define OFP_VERSION   0x82
54
55 #define OFP_MAX_TABLE_NAME_LEN 32
56 #define OFP_MAX_PORT_NAME_LEN  16
57
58 #define OFP_TCP_PORT  975
59 #define OFP_SSL_PORT  976
60
61 #define OFP_ETH_ALEN 6          /* Bytes in an Ethernet address. */
62
63 /* Port numbering.  Physical ports are numbered starting from 0. */
64 enum ofp_port {
65     /* Maximum number of physical switch ports. */
66     OFPP_MAX = 0x100,
67
68     /* Fake output "ports". */
69     OFPP_TABLE      = 0xfff9,  /* Perform actions in flow table.  
70                                 * NB: This can only be the destination
71                                 * port for packet-out messages. 
72                                 */
73     OFPP_NORMAL     = 0xfffa,  /* Process with normal L2/L3 switching. */
74     OFPP_FLOOD      = 0xfffb,  /* All physical ports except input port and 
75                                   those disabled by STP. */
76     OFPP_ALL        = 0xfffc,  /* All physical ports except input port. */
77     OFPP_CONTROLLER = 0xfffd,  /* Send to controller. */ 
78     OFPP_LOCAL      = 0xfffe,  /* Local openflow "port". */ /* xxx Want?! */
79     OFPP_NONE       = 0xffff   /* Not associated with a physical port. */
80 };
81
82 enum ofp_type {
83     OFPT_FEATURES_REQUEST,    /*  0 Controller/switch message */
84     OFPT_FEATURES_REPLY,      /*  1 Controller/switch message */
85     OFPT_GET_CONFIG_REQUEST,  /*  2 Controller/switch message */
86     OFPT_GET_CONFIG_REPLY,    /*  3 Controller/switch message */
87     OFPT_SET_CONFIG,          /*  4 Controller/switch message */
88     OFPT_PACKET_IN,           /*  5 Async message */
89     OFPT_PACKET_OUT,          /*  6 Controller/switch message */
90     OFPT_FLOW_MOD,            /*  7 Controller/switch message */
91     OFPT_FLOW_EXPIRED,        /*  8 Async message */
92     OFPT_TABLE,               /*  9 Controller/switch message */
93     OFPT_PORT_MOD,            /* 10 Controller/switch message */
94     OFPT_PORT_STATUS,         /* 11 Async message */
95     OFPT_ERROR_MSG,           /* 12 Async message */
96     OFPT_STATS_REQUEST,       /* 13 Controller/switch message */
97     OFPT_STATS_REPLY          /* 14 Controller/switch message */
98 };
99
100 /* Header on all OpenFlow packets. */
101 struct ofp_header {
102     uint8_t version;    /* OFP_VERSION. */
103     uint8_t type;       /* One of the OFPT_ constants. */
104     uint16_t length;    /* Length including this ofp_header. */
105     uint32_t xid;       /* Transactin id associated with this packet.
106                            Replies use the same id as was in the request
107                            to facilitate pairing. */
108 };
109
110 #define OFP_DEFAULT_MISS_SEND_LEN   128
111
112 enum ofp_config_flags {
113     /* Tells datapath to notify the controller of expired flow entries. */
114     OFPC_SEND_FLOW_EXP = 1 << 0
115 };
116
117 /* Switch configuration. */
118 struct ofp_switch_config {
119     struct ofp_header header;
120     uint16_t flags;             /* OFPC_* flags. */
121     uint16_t miss_send_len;     /* Max bytes of new flow that datapath should
122                                    send to the controller. */
123 };
124
125 /* Capabilities supported by the datapath. */
126 enum ofp_capabilities {
127     OFPC_FLOW_STATS   = 1 << 0, /* Flow statistics. */
128     OFPC_TABLE_STATS  = 1 << 1, /* Table statistics. */
129     OFPC_PORT_STATS   = 1 << 2, /* Port statistics. */
130     OFPC_STP          = 1 << 3, /* 802.11d spanning tree. */
131     OFPC_MULTI_PHY_TX = 1 << 4  /* Supports transmitting through multiple
132                                    physical interfaces */
133 };
134
135 /* Flags to indicate behavior of the physical port */
136 enum ofp_port_flags {
137     OFPPFL_NO_FLOOD  = 1 << 0, /* Do not include this port when flooding */
138 };
139
140 /* Features of physical ports available in a datapath. */
141 enum ofp_port_features {
142     OFPPF_10MB_HD    = 1 << 0, /* 10 Mb half-duplex rate support. */
143     OFPPF_10MB_FD    = 1 << 1, /* 10 Mb full-duplex rate support. */
144     OFPPF_100MB_HD   = 1 << 2, /* 100 Mb half-duplex rate support. */
145     OFPPF_100MB_FD   = 1 << 3, /* 100 Mb full-duplex rate support. */
146     OFPPF_1GB_HD     = 1 << 4, /* 1 Gb half-duplex rate support. */
147     OFPPF_1GB_FD     = 1 << 5, /* 1 Gb full-duplex rate support. */
148     OFPPF_10GB_FD    = 1 << 6, /* 10 Gb full-duplex rate support. */
149 };
150
151
152 /* Description of a physical port */
153 struct ofp_phy_port {
154     uint16_t port_no;
155     uint8_t hw_addr[OFP_ETH_ALEN];
156     uint8_t name[OFP_MAX_PORT_NAME_LEN]; /* Null-terminated */
157     uint32_t flags;         /* Bitmap of "ofp_port_flags". */
158     uint32_t speed;         /* Current speed in Mbps */
159     uint32_t features;      /* Bitmap of supported "ofp_port_features"s. */
160 };
161
162 /* Switch features. */
163 struct ofp_switch_features {
164     struct ofp_header header;
165     uint64_t datapath_id;   /* Datapath unique ID */
166
167     /* Table info. */
168     uint32_t n_exact;       /* Max exact-match table entries. */
169     uint32_t n_compression; /* Max entries compressed on service port.  */
170     uint32_t n_general;     /* Max entries of arbitrary form. */
171
172     /* Buffer limits.  A datapath that cannot buffer reports 0.*/
173     uint32_t buffer_mb;     /* Space for buffering packets, in MB. */
174     uint32_t n_buffers;     /* Max packets buffered at once. */
175
176     /* Features. */
177     uint32_t capabilities;  /* Bitmap of support "ofp_capabilities". */
178     uint32_t actions;       /* Bitmap of supported "ofp_action_type"s. */
179
180     /* Port info.*/
181     struct ofp_phy_port ports[0];   /* Port definitions.  The number of ports
182                                       is inferred from the length field in
183                                       the header. */
184 };
185
186 /* What changed about the phsyical port */
187 enum ofp_port_reason {
188     OFPPR_ADD,              /* The port was added */
189     OFPPR_DELETE,           /* The port was removed */
190     OFPPR_MOD               /* Some attribute of the port has changed */
191 };
192
193 /* A physical port has changed in the datapath */
194 struct ofp_port_status {
195     struct ofp_header header;
196     uint8_t reason;          /* One of OFPPR_* */
197     uint8_t pad[3];          /* Align to 32-bits */
198     struct ofp_phy_port desc;
199 };
200
201 /* Modify behavior of the physical port */
202 struct ofp_port_mod {
203     struct ofp_header header;
204     struct ofp_phy_port desc;
205 };
206
207 /* Why is this packet being sent to the controller? */
208 enum ofp_reason {
209     OFPR_NO_MATCH,          /* No matching flow. */
210     OFPR_ACTION             /* Action explicitly output to controller. */
211 };
212
213 /* Packet received on port (datapath -> controller). */
214 struct ofp_packet_in {
215     struct ofp_header header;
216     uint32_t buffer_id;     /* ID assigned by datapath. */
217     uint16_t total_len;     /* Full length of frame. */
218     uint16_t in_port;       /* Port on which frame was received. */
219     uint8_t reason;         /* Reason packet is being sent (one of OFPR_*) */
220     uint8_t pad;
221     uint8_t data[0];        /* Ethernet frame, halfway through 32-bit word,
222                                so the IP header is 32-bit aligned.  The 
223                                amount of data is inferred from the length
224                                field in the header.  Because of padding,
225                                offsetof(struct ofp_packet_in, data) ==
226                                sizeof(struct ofp_packet_in) - 2. */
227 };
228
229 enum ofp_action_type {
230     OFPAT_OUTPUT,           /* Output to switch port. */
231     OFPAT_SET_DL_VLAN,      /* VLAN. */
232     OFPAT_SET_DL_SRC,       /* Ethernet source address. */
233     OFPAT_SET_DL_DST,       /* Ethernet destination address. */
234     OFPAT_SET_NW_SRC,       /* IP source address. */
235     OFPAT_SET_NW_DST,       /* IP destination address. */
236     OFPAT_SET_TP_SRC,       /* TCP/UDP source port. */
237     OFPAT_SET_TP_DST        /* TCP/UDP destination port. */
238 };
239
240 /* An output action sends packets out 'port'.  When the 'port' is the
241  * OFPP_CONTROLLER, 'max_len' indicates the max number of bytes to
242  * send.  A 'max_len' of zero means the entire packet should be sent. */
243 struct ofp_action_output {
244     uint16_t max_len;
245     uint16_t port;
246 };
247
248 /* The VLAN id is 12-bits, so we'll use the entire 16 bits to indicate
249  * special conditions.  All ones is used to indicate that no VLAN id was
250  * set, or if used as an action, that the VLAN header should be
251  * stripped.
252  */
253 #define OFP_VLAN_NONE      0xffff
254
255 struct ofp_action {
256     uint16_t type;                       /* One of OFPAT_* */
257     union {
258         struct ofp_action_output output; /* OFPAT_OUTPUT: output struct. */
259         uint16_t vlan_id;                /* OFPAT_SET_DL_VLAN: VLAN id. */
260         uint8_t  dl_addr[OFP_ETH_ALEN];  /* OFPAT_SET_DL_SRC/DST */
261         uint32_t nw_addr;                /* OFPAT_SET_NW_SRC/DST */
262         uint16_t tp;                     /* OFPAT_SET_TP_SRC/DST */
263     } arg;
264 };
265
266 /* Send packet (controller -> datapath). */
267 struct ofp_packet_out {
268     struct ofp_header header;
269     uint32_t buffer_id;     /* ID assigned by datapath (-1 if none). */
270     uint16_t in_port;       /* Packet's input port (OFPP_NONE if none). */
271     uint16_t out_port;      /* Output port (if buffer_id == -1). */
272     union {
273         struct ofp_action actions[0]; /* buffer_id != -1 */
274         uint8_t data[0];              /* buffer_id == -1 */
275     } u;
276 };
277
278 enum ofp_flow_mod_command {
279     OFPFC_ADD,              /* New flow. */
280     OFPFC_DELETE,           /* Delete all matching flows. */
281     OFPFC_DELETE_STRICT     /* Strictly match wildcards and priority. */
282 };
283
284 /* Flow wildcards. */
285 enum ofp_flow_wildcards {
286     OFPFW_IN_PORT  = 1 << 0,  /* Switch input port. */
287     OFPFW_DL_VLAN  = 1 << 1,  /* VLAN. */
288     OFPFW_DL_SRC   = 1 << 2,  /* Ethernet source address. */
289     OFPFW_DL_DST   = 1 << 3,  /* Ethernet destination address. */
290     OFPFW_DL_TYPE  = 1 << 4,  /* Ethernet frame type. */
291     OFPFW_NW_SRC   = 1 << 5,  /* IP source address. */
292     OFPFW_NW_DST   = 1 << 6,  /* IP destination address. */
293     OFPFW_NW_PROTO = 1 << 7,  /* IP protocol. */
294     OFPFW_TP_SRC   = 1 << 8,  /* TCP/UDP source port. */
295     OFPFW_TP_DST   = 1 << 9,  /* TCP/UDP destination port. */
296     OFPFW_ALL      = (1 << 10) - 1
297 };
298
299 /* Values below this cutoff are 802.3 packets and the two bytes
300  * following MAC addresses are used as a frame length.  Otherwise, the
301  * two bytes are used as the Ethernet type.
302  */
303 #define OFP_DL_TYPE_ETH2_CUTOFF   0x0600
304
305 /* Value of dl_type to indicate that the frame does not include an
306  * Ethernet type.
307  */
308 #define OFP_DL_TYPE_NOT_ETH_TYPE  0x05ff
309
310 /* Fields to match against flows */
311 struct ofp_match {
312     uint16_t wildcards;        /* Wildcard fields. */
313     uint16_t in_port;          /* Input switch port. */
314     uint8_t dl_src[OFP_ETH_ALEN]; /* Ethernet source address. */
315     uint8_t dl_dst[OFP_ETH_ALEN]; /* Ethernet destination address. */
316     uint16_t dl_vlan;          /* Input VLAN. */
317     uint16_t dl_type;          /* Ethernet frame type. */
318     uint32_t nw_src;           /* IP source address. */
319     uint32_t nw_dst;           /* IP destination address. */
320     uint8_t nw_proto;          /* IP protocol. */
321     uint8_t pad[3];            /* Align to 32-bits. */
322     uint16_t tp_src;           /* TCP/UDP source port. */
323     uint16_t tp_dst;           /* TCP/UDP destination port. */
324 };
325
326 /* Value used in "max_idle" to indicate that the entry is permanent */
327 #define OFP_FLOW_PERMANENT 0
328
329 /* By default, choose a priority in the middle */
330 #define OFP_DEFAULT_PRIORITY 0x8000
331
332 /* Flow setup and teardown (controller -> datapath). */
333 struct ofp_flow_mod {
334     struct ofp_header header;
335     struct ofp_match match;      /* Fields to match */
336
337     /* Flow actions. */
338     uint16_t command;             /* One of OFPFC_*. */
339     uint16_t max_idle;            /* Idle time before discarding (seconds). */
340     uint32_t buffer_id;           /* Buffered packet to apply to (or -1). */
341     uint16_t priority;            /* Priority level of flow entry. */
342     uint8_t pad[2];               /* Align to 32-bits. */
343     uint32_t reserved;            /* Reserved for future use. */
344     struct ofp_action actions[0]; /* The number of actions is inferred from
345                                     the length field in the header. */
346 };
347
348 /* Flow expiration (datapath -> controller). */
349 struct ofp_flow_expired {
350     struct ofp_header header;
351     struct ofp_match match;   /* Description of fields */
352
353     uint32_t duration;        /* Time flow was alive in seconds. */
354     uint64_t packet_count;    
355     uint64_t byte_count;
356 };
357
358 /* Error message (datapath -> controller). */
359 struct ofp_error_msg {
360     struct ofp_header header;
361
362     uint16_t type;
363     uint16_t code;
364     uint8_t data[0];          /* Variable-length data.  Interpreted based 
365                                  on the type and code. */
366 };
367
368 enum ofp_stats_types {
369     /* Flow statistics.
370      * The request body is struct ofp_flow_stats_request.
371      * The reply body is an array of struct ofp_flow_stats. */
372     OFPST_FLOW,
373
374     /* Flow table statistics.
375      * The request body is empty.
376      * The reply body is an array of struct ofp_table_stats. */
377     OFPST_TABLE,
378
379     /* Physical port statistics.
380      * The request body is empty.
381      * The reply body is an array of struct ofp_port_stats. */
382     OFPST_PORT
383 };
384
385 struct ofp_stats_request {
386     struct ofp_header header;
387     uint16_t type;              /* One of the OFPST_* constants. */
388     uint16_t flags;             /* OFPSF_REQ_* flags (none yet defined). */
389     uint8_t body[0];            /* Body of the request. */
390 };
391
392 enum ofp_stats_reply_flags {
393     OFPSF_REPLY_MORE  = 1 << 0, /* More replies to follow */
394 };
395
396 struct ofp_stats_reply {
397     struct ofp_header header;
398     uint16_t type;              /* One of the OFPST_* constants. */
399     uint16_t flags;             /* OFPSF_REPLY_* flags. */
400     uint8_t body[0];            /* Body of the reply. */
401 };
402
403 enum ofp_stats_type {
404     OFPFS_INDIV,              /* Send an entry for each matching flow */
405     OFPFS_AGGREGATE           /* Aggregate matching flows */
406 };
407
408 /* Body for ofp_stats_request of type OFPST_FLOW. */
409 struct ofp_flow_stats_request {
410     struct ofp_match match;   /* Fields to match */
411     uint8_t table_id;         /* ID of table to read (from ofp_table_stats)
412                                  or 0xff for all tables. */
413     uint8_t type;             /* One of OFPFS_ */
414     uint16_t pad;               /* Align to 32-bits */
415 };
416
417 /* Body of reply to OFPST_FLOW request. */
418 struct ofp_flow_stats {
419     struct ofp_match match;   /* Description of fields */
420     uint32_t duration;        /* Time flow has been alive in seconds.  Only 
421                                  used for non-aggregated results. */
422     uint64_t packet_count;    /* Number of packets in flow. */
423     uint64_t byte_count;      /* Number of bytes in flow. */
424     uint16_t priority;        /* Priority of the entry.  Only meaningful 
425                                  when this is not an exact-match entry. */
426     uint8_t table_id;         /* ID of table flow came from. */
427     uint8_t pad[5];           /* Align to 64-bits. */
428 };
429
430 /* Body of reply to OFPST_TABLE request. */
431 struct ofp_table_stats {
432     uint8_t table_id;
433     uint8_t pad[3];          /* Align to 32-bits */
434     char name[OFP_MAX_TABLE_NAME_LEN];
435     uint32_t max_entries;    /* Max number of entries supported */
436     uint32_t active_count;   /* Number of active entries */
437     uint64_t matched_count;  /* Number of packets that hit table */
438 };
439
440 /* Statistics about a particular port */
441 struct ofp_port_stats {
442     uint16_t port_no;
443     uint8_t pad[2];          /* Align to 32-bits */
444     uint64_t rx_count;       /* Number of received packets */
445     uint64_t tx_count;       /* Number of transmitted packets */
446     uint64_t drop_count;     /* Number of packets dropped by interface */
447 };
448
449 #endif /* openflow.h */