tests/ofproto-dpif.at

   1 AT_BANNER([ofproto-dpif])
   2
   3 AT_SETUP([ofproto-dpif - resubmit])
   4 OVS_VSWITCHD_START
   5 AT_DATA([flows.txt], [dnl
   6 table=0 in_port=1 priority=1000 icmp actions=output(10),resubmit(2),output(19),resubmit(3),output(21)
   7 table=0 in_port=2 priority=1500 icmp actions=output(11),resubmit(,1),output(16),resubmit(2,1),output(18)
   8 table=0 in_port=3 priority=2000 icmp actions=output(20)
   9 table=1 in_port=1 priority=1000 icmp actions=output(12),resubmit(4,1),output(13),resubmit(3),output(15)
  10 table=1 in_port=2 priority=1500 icmp actions=output(17),resubmit(,2)
  11 table=1 in_port=3 priority=1500 icmp actions=output(14),resubmit(,2)
  12 ])
  13 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
  14 AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,frag=no),icmp(type=8,code=0)'], [0], [stdout])
  15 AT_CHECK([tail -1 stdout], [0],
  16   [Datapath actions: 10,11,12,13,14,15,16,17,18,19,20,21
  17 ])
  18 OVS_VSWITCHD_STOP
  19 AT_CLEANUP
  20
  21 AT_SETUP([ofproto-dpif - registers])
  22 OVS_VSWITCHD_START
  23 AT_DATA([flows.txt], [dnl
  24 in_port=90                 actions=resubmit:2,resubmit:3,resubmit:4,resubmit:91
  25 in_port=91                 actions=resubmit:5,resubmit:6,resubmit:7,resubmit:92
  26 in_port=92                 actions=resubmit:8,resubmit:9,resubmit:10,resubmit:11
  27 in_port=2                  actions=load:0x000db000->NXM_NX_REG0[[]]
  28 in_port=3                  actions=load:0xdea->NXM_NX_REG0[[20..31]]
  29 in_port=4                  actions=load:0xeef->NXM_NX_REG0[[0..11]]
  30 in_port=5                  actions=move:NXM_NX_REG0[[]]->NXM_NX_REG1[[]]
  31 in_port=6                  actions=load:0x22222222->NXM_NX_REG2[[]]
  32 in_port=7                  actions=move:NXM_NX_REG1[[20..31]]->NXM_NX_REG2[[0..11]]
  33 in_port=8                  actions=move:NXM_NX_REG1[[0..11]]->NXM_NX_REG2[[20..31]]
  34 in_port=9,reg0=0xdeadbeef  actions=output:20
  35 in_port=10,reg1=0xdeadbeef actions=output:21
  36 in_port=11,reg2=0xeef22dea actions=output:22
  37 ])
  38 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
  39 AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,frag=no),icmp(type=8,code=0)'], [0], [stdout])
  40 AT_CHECK([tail -1 stdout], [0],
  41   [Datapath actions: 20,21,22
  42 ])
  43 OVS_VSWITCHD_STOP
  44 AT_CLEANUP
  45
  46 AT_SETUP([ofproto-dpif - output])
  47 OVS_VSWITCHD_START
  48 AT_DATA([flows.txt], [dnl
  49 in_port=1 actions=resubmit:2,resubmit:3,resubmit:4,resubmit:5,resubmit:6,resubmit:7
  50 in_port=2 actions=output:9
  51 in_port=3 actions=load:55->NXM_NX_REG0[[]],output:NXM_NX_REG0[[]],load:66->NXM_NX_REG1[[]]
  52 in_port=4 actions=output:10,output:NXM_NX_REG0[[]],output:NXM_NX_REG1[[]],output:11
  53 in_port=5 actions=load:77->NXM_NX_REG0[[0..15]],load:88->NXM_NX_REG0[[16..31]]
  54 in_port=6 actions=output:NXM_NX_REG0[[0..15]],output:NXM_NX_REG0[[16..31]]
  55 in_port=7 actions=load:0x110000ff->NXM_NX_REG0[[]],output:NXM_NX_REG0[[]]
  56 ])
  57 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
  58 AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,frag=no),icmp(type=8,code=0)'], [0], [stdout])
  59 AT_CHECK([tail -1 stdout], [0],
  60   [Datapath actions: 9,55,10,55,66,11,77,88
  61 ])
  62 OVS_VSWITCHD_STOP
  63 AT_CLEANUP
  64
  65 AT_SETUP([ofproto-dpif - set_tunnel])
  66 OVS_VSWITCHD_START
  67 AT_DATA([flows.txt], [dnl
  68 in_port=90 actions=resubmit:1,resubmit:2,resubmit:3,resubmit:4,resubmit:5
  69 in_port=1 actions=set_tunnel:1,output:1
  70 in_port=2 actions=set_tunnel:1,output:2
  71 in_port=3 actions=set_tunnel:2,set_tunnel:3,output:3
  72 in_port=4 actions=set_tunnel:4,set_tunnel:3,output:4
  73 in_port=5 actions=set_tunnel:5
  74 ])
  75 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
  76 AT_CHECK([ovs-appctl ofproto/trace br0 'tun_id(0x1),in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,frag=no),icmp(type=8,code=0)'], [0], [stdout])
  77 AT_CHECK([tail -1 stdout], [0],
  78   [Datapath actions: set(tun_id(0x1)),1,2,set(tun_id(0x3)),3,4
  79 ])
  80 OVS_VSWITCHD_STOP
  81 AT_CLEANUP
  82
  83 AT_SETUP([ofproto-dpif - VLAN handling])
  84 OVS_VSWITCHD_START(
  85   [set Bridge br0 fail-mode=standalone -- \
  86    add-port br0 p1                                  trunks=10,12 -- \
  87    add-port br0 p2                           tag=10              -- \
  88    add-port br0 p3                           tag=12              -- \
  89    add-port br0 p4                           tag=12              -- \
  90    add-port br0 p5 vlan_mode=native-tagged   tag=10              -- \
  91    add-port br0 p6 vlan_mode=native-tagged   tag=10 trunks=10,12 -- \
  92    add-port br0 p7 vlan_mode=native-untagged tag=12              -- \
  93    add-port br0 p8 vlan_mode=native-untagged tag=12 trunks=10,12 -- \
  94    set Interface p1 type=dummy -- \
  95    set Interface p2 type=dummy -- \
  96    set Interface p3 type=dummy -- \
  97    set Interface p4 type=dummy -- \
  98    set Interface p5 type=dummy -- \
  99    set Interface p6 type=dummy -- \
 100    set Interface p7 type=dummy -- \
 101    set Interface p8 type=dummy --])
 102
 103 AT_CHECK(
 104   [ovs-vsctl \
 105         -- get Interface p1 ofport \
 106         -- get Interface p2 ofport \
 107         -- get Interface p3 ofport \
 108         -- get Interface p4 ofport \
 109         -- get Interface p5 ofport \
 110         -- get Interface p6 ofport \
 111         -- get Interface p7 ofport \
 112         -- get Interface p8 ofport],
 113   [0], [stdout])
 114 set `cat stdout`
 115 br0=0 p1=$1 p2=$2 p3=$3 p4=$4 p5=$5 p6=$6 p7=$7 p8=$8
 116
 117 dnl Each of these specifies an in_port, a VLAN VID (or "none"), a VLAN
 118 dnl PCP (used if the VID isn't "none") and the expected set of datapath
 119 dnl actions.
 120 for tuple in \
 121         "br0 none 0 drop" \
 122         "br0 0    0 drop" \
 123         "br0 0    1 drop" \
 124         "br0 10   0 p1,p5,p6,p7,p8,pop(vlan),p2" \
 125         "br0 10   1 p1,p5,p6,p7,p8,pop(vlan),p2" \
 126         "br0 11   0 p5,p7" \
 127         "br0 11   1 p5,p7" \
 128         "br0 12   0 p1,p5,p6,pop(vlan),p3,p4,p7,p8" \
 129         "br0 12   1 p1,p5,p6,pop(vlan),p3,p4,p7,p8" \
 130         "p1  none 0 drop" \
 131         "p1  0    0 drop" \
 132         "p1  0    1 drop" \
 133         "p1  10   0 br0,p5,p6,p7,p8,pop(vlan),p2" \
 134         "p1  10   1 br0,p5,p6,p7,p8,pop(vlan),p2" \
 135         "p1  11   0 drop" \
 136         "p1  11   1 drop" \
 137         "p1  12   0 br0,p5,p6,pop(vlan),p3,p4,p7,p8" \
 138         "p1  12   1 br0,p5,p6,pop(vlan),p3,p4,p7,p8" \
 139         "p2  none 0 push(vlan(vid=10,pcp=0)),br0,p1,p5,p6,p7,p8" \
 140         "p2  0    0 pop(vlan),push(vlan(vid=10,pcp=0)),br0,p1,p5,p6,p7,p8" \
 141         "p2  0    1 pop(vlan),push(vlan(vid=10,pcp=1)),br0,p1,p5,p6,p7,p8" \
 142         "p2  10   0 drop" \
 143         "p2  10   1 drop" \
 144         "p2  11   0 drop" \
 145         "p2  11   1 drop" \
 146         "p2  12   0 drop" \
 147         "p2  12   1 drop" \
 148         "p3  none 0 p4,p7,p8,push(vlan(vid=12,pcp=0)),br0,p1,p5,p6" \
 149         "p3  0    0 pop(vlan),p4,p7,p8,push(vlan(vid=12,pcp=0)),br0,p1,p5,p6" \
 150         "p3  0    1 pop(vlan),p4,p7,p8,push(vlan(vid=12,pcp=1)),br0,p1,p5,p6" \
 151         "p3  10   0 drop" \
 152         "p3  10   1 drop" \
 153         "p3  11   0 drop" \
 154         "p3  11   1 drop" \
 155         "p3  12   0 drop" \
 156         "p3  12   1 drop" \
 157         "p4  none 0 p3,p7,p8,push(vlan(vid=12,pcp=0)),br0,p1,p5,p6" \
 158         "p4  0    0 pop(vlan),p3,p7,p8,push(vlan(vid=12,pcp=0)),br0,p1,p5,p6" \
 159         "p4  0    1 pop(vlan),p3,p7,p8,push(vlan(vid=12,pcp=1)),br0,p1,p5,p6" \
 160         "p4  10   0 drop" \
 161         "p4  10   1 drop" \
 162         "p4  11   0 drop" \
 163         "p4  11   1 drop" \
 164         "p4  12   0 drop" \
 165         "p4  12   1 drop" \
 166         "p5  none 0 p2,push(vlan(vid=10,pcp=0)),br0,p1,p6,p7,p8" \
 167         "p5  0    0 pop(vlan),p2,push(vlan(vid=10,pcp=0)),br0,p1,p6,p7,p8" \
 168         "p5  0    1 pop(vlan),p2,push(vlan(vid=10,pcp=1)),br0,p1,p6,p7,p8" \
 169         "p5  10   0 br0,p1,p6,p7,p8,pop(vlan),p2" \
 170         "p5  10   1 br0,p1,p6,p7,p8,pop(vlan),p2" \
 171         "p5  11   0 br0,p7" \
 172         "p5  11   1 br0,p7" \
 173         "p5  12   0 br0,p1,p6,pop(vlan),p3,p4,p7,p8" \
 174         "p5  12   1 br0,p1,p6,pop(vlan),p3,p4,p7,p8" \
 175         "p6  none 0 p2,push(vlan(vid=10,pcp=0)),br0,p1,p5,p7,p8" \
 176         "p6  0    0 pop(vlan),p2,push(vlan(vid=10,pcp=0)),br0,p1,p5,p7,p8" \
 177         "p6  0    1 pop(vlan),p2,push(vlan(vid=10,pcp=1)),br0,p1,p5,p7,p8" \
 178         "p6  10   0 br0,p1,p5,p7,p8,pop(vlan),p2" \
 179         "p6  10   1 br0,p1,p5,p7,p8,pop(vlan),p2" \
 180         "p6  11   0 drop" \
 181         "p6  11   1 drop" \
 182         "p6  12   0 br0,p1,p5,pop(vlan),p3,p4,p7,p8" \
 183         "p6  12   1 br0,p1,p5,pop(vlan),p3,p4,p7,p8" \
 184         "p7  none 0 p3,p4,p8,push(vlan(vid=12,pcp=0)),br0,p1,p5,p6" \
 185         "p7  0    0 pop(vlan),p3,p4,p8,push(vlan(vid=12,pcp=0)),br0,p1,p5,p6" \
 186         "p7  0    1 pop(vlan),p3,p4,p8,push(vlan(vid=12,pcp=1)),br0,p1,p5,p6" \
 187         "p7  10   0 br0,p1,p5,p6,p8,pop(vlan),p2" \
 188         "p7  10   1 br0,p1,p5,p6,p8,pop(vlan),p2" \
 189         "p7  11   0 br0,p5" \
 190         "p7  11   1 br0,p5" \
 191         "p7  12   0 br0,p1,p5,p6,pop(vlan),p3,p4,p8" \
 192         "p7  12   1 br0,p1,p5,p6,pop(vlan),p3,p4,p8" \
 193         "p8  none 0 p3,p4,p7,push(vlan(vid=12,pcp=0)),br0,p1,p5,p6" \
 194         "p8  0    0 pop(vlan),p3,p4,p7,push(vlan(vid=12,pcp=0)),br0,p1,p5,p6" \
 195         "p8  0    1 pop(vlan),p3,p4,p7,push(vlan(vid=12,pcp=1)),br0,p1,p5,p6" \
 196         "p8  10   0 br0,p1,p5,p6,p7,pop(vlan),p2" \
 197         "p8  10   1 br0,p1,p5,p6,p7,pop(vlan),p2" \
 198         "p8  11   0 drop" \
 199         "p8  11   1 drop" \
 200         "p8  12   0 br0,p1,p5,p6,pop(vlan),p3,p4,p7" \
 201         "p8  12   1 br0,p1,p5,p6,pop(vlan),p3,p4,p7"
 202 do
 203   set $tuple
 204   in_port=$1
 205   vlan=$2
 206   pcp=$3
 207   expected=$4
 208
 209   eval n_in_port=\$$in_port
 210   if test $vlan = none; then
 211     flow="in_port($n_in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),eth_type(0xabcd)"
 212   else
 213     flow="in_port($n_in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),vlan(vid=$vlan,pcp=$pcp),eth_type(0xabcd)"
 214   fi
 215
 216   AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
 217   actual=`tail -1 stdout | sed 's/Datapath actions: //'`
 218
 219   AT_CHECK([echo "in_port=$in_port vlan=$vlan"
 220             $PERL $srcdir/compare-odp-actions.pl "$expected" "$actual" br0=$br0 p1=$p1 p2=$p2 p3=$p3 p4=$p4 p5=$p5 p6=$p6 p7=$p7 p8=$p8], [0], [ignore])
 221 done
 222
 223 OVS_VSWITCHD_STOP
 224 AT_CLEANUP
 225
 226 AT_SETUP([ofproto-dpif - fragment handling])
 227 OVS_VSWITCHD_START
 228 AT_DATA([flows.txt], [dnl
 229 priority=75 tcp ip_frag=no    tp_dst=80 actions=output:1
 230 priority=75 tcp ip_frag=first tp_dst=80 actions=output:2
 231 priority=75 tcp ip_frag=later tp_dst=80 actions=output:3
 232 priority=50 tcp ip_frag=no              actions=output:4
 233 priority=50 tcp ip_frag=first           actions=output:5
 234 priority=50 tcp ip_frag=later           actions=output:6
 235 ])
 236 AT_CHECK([ovs-ofctl replace-flows br0 flows.txt])
 237
 238 base_flow="in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0"
 239 no_flow="$base_flow,frag=no),tcp(src=12345,dst=80)"
 240 first_flow="$base_flow,frag=first),tcp(src=12345,dst=80)"
 241 later_flow="$base_flow,frag=later)"
 242
 243     # mode    no  first  later
 244 for tuple in \
 245     'normal    1     5      6' \
 246     'drop      1  drop   drop' \
 247     'nx-match  1     2      6'
 248 do
 249   set $tuple
 250   mode=$1
 251   no=$2
 252   first=$3
 253   later=$4
 254
 255   AT_CHECK([ovs-ofctl set-frags br0 $mode])
 256   for type in no first later; do
 257     eval flow=\$${type}_flow exp_output=\$$type
 258     AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
 259     AT_CHECK_UNQUOTED([tail -1 stdout], [0], [Datapath actions: $exp_output
 260 ])
 261   done
 262 done
 263 OVS_VSWITCHD_STOP
 264 AT_CLEANUP