Debian: openswitch-dbg should depend on the packages it has debugging symbols for
[sliver-openvswitch.git] / xenserver / openvswitch-xen.spec
1 # Spec file for Open vSwitch.
2
3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
4 #
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved.  This file is offered as-is,
8 # without warranty of any kind.
9
10 # When building, the rpmbuild command line should define
11 # openvswitch_version, xen_version, and build_number using -D arguments.
12 # for example:
13 #
14 #    rpmbuild -D "openvswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/openvswitch-xen.spec
15 #
16 %define version %{openvswitch_version}-%{xen_version}
17
18 Name: openvswitch
19 Summary: Virtual switch
20 Group: System Environment/Daemons
21 URL: http://www.openvswitch.org/
22 Vendor: Nicira Networks, Inc.
23 Version: %{openvswitch_version}
24
25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
26 License: ASL 2.0 and GPLv2
27 Release: 1
28 Source: openvswitch-%{openvswitch_version}.tar.gz
29 Buildroot: /tmp/openvswitch-xen-rpm
30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
31
32 %description
33 Open vSwitch provides standard network bridging functions augmented with
34 support for the OpenFlow protocol for remote per-flow control of
35 traffic.
36
37 %prep
38 %setup -q -n openvswitch-%{openvswitch_version}
39
40 %build
41 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
42 make %{_smp_mflags}
43
44 %install
45 rm -rf $RPM_BUILD_ROOT
46 make install DESTDIR=$RPM_BUILD_ROOT
47 install -d -m 755 $RPM_BUILD_ROOT/etc
48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
49 install -m 755 xenserver/etc_init.d_openvswitch \
50          $RPM_BUILD_ROOT/etc/init.d/openvswitch
51 install -m 755 xenserver/etc_init.d_openvswitch-xapi-update \
52          $RPM_BUILD_ROOT/etc/init.d/openvswitch-xapi-update
53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
55 install -m 755 xenserver/etc_logrotate.d_openvswitch \
56          $RPM_BUILD_ROOT/etc/logrotate.d/openvswitch
57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
58 install -m 755 xenserver/etc_profile.d_openvswitch.sh \
59          $RPM_BUILD_ROOT/etc/profile.d/openvswitch.sh
60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
61 install -m 755 xenserver/etc_xapi.d_plugins_openvswitch-cfg-update \
62          $RPM_BUILD_ROOT/etc/xapi.d/plugins/openvswitch-cfg-update
63 install -d -m 755 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts
64 install -m 644 vswitchd/vswitch.ovsschema \
65          $RPM_BUILD_ROOT/usr/share/openvswitch/vswitch.ovsschema
66 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
67              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/interface-reconfigure
68 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
69              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigure.py
70 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
71              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
72 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
73              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
74 install -m 755 xenserver/etc_xensource_scripts_vif \
75              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/vif
76 install -m 755 xenserver/usr_share_openvswitch_scripts_monitor-external-ids \
77                $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/monitor-external-ids
78 install -m 755 xenserver/usr_share_openvswitch_scripts_refresh-xs-network-uuids \
79                $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/refresh-xs-network-uuids
80 install -m 755 xenserver/usr_sbin_xen-bugtool \
81              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/xen-bugtool
82 install -m 755 xenserver/usr_sbin_brctl \
83              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/brctl
84 install -m 755 xenserver/usr_share_openvswitch_scripts_sysconfig.template \
85          $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/sysconfig.template
86 install -d -m 755 $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base
87 install -m 644 \
88         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
89                $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
90
91 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch
92 find datapath/linux-2.6 -name *.ko -exec install -m 755  \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch \;
93 install xenserver/uuid.py $RPM_BUILD_ROOT/usr/share/openvswitch/python
94
95 # Get rid of stuff we don't want to make RPM happy.
96 rm \
97     $RPM_BUILD_ROOT/usr/bin/ovs-controller \
98     $RPM_BUILD_ROOT/usr/bin/ovs-discover \
99     $RPM_BUILD_ROOT/usr/bin/ovs-kill \
100     $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
101     $RPM_BUILD_ROOT/usr/bin/ovs-pki \
102     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
103     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
104     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
105     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
106     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
107
108 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
109
110 %clean
111 rm -rf $RPM_BUILD_ROOT
112
113 %post
114 if [ ! -f /etc/xensource-inventory ]; then
115     printf "XenSource inventory not present in /etc/xensource-inventory"
116     exit 1
117 fi
118 . /etc/xensource-inventory
119
120 if [ "$1" = "1" ]; then
121     if md5sum -c --status <<EOF
122 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
123 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
124 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
125 5654c8c36699fcc8744ca9cd5b855414  /usr/sbin/xen-bugtool
126 EOF
127     then
128         printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
129     elif md5sum -c --status <<EOF
130 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
131 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
132 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
133 f6519085c2fc5f7bc4eccc294ed62000  /usr/sbin/xen-bugtool
134 EOF
135     then
136         printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
137         printf "or 5.5.0-25727p (Update 2).\n\n"
138     elif md5sum -c --status <<EOF
139 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
140 02cf136237ed85fcbcc1efc15ce0591c  /opt/xensource/libexec/interface-reconfigure
141 3a192ee70ebf2153c90051b3af95f331  /opt/xensource/libexec/InterfaceReconfigureBridge.py
142 f71cadf1464caefa7943de0ab47fdd8a  /opt/xensource/libexec/InterfaceReconfigure.py
143 d70f08f235fb1bfd49a0580e440f15a0  /opt/xensource/libexec/InterfaceReconfigureVswitch.py
144 f5c85ca825b1e6f5a0845530981cd836  /etc/xensource/scripts/vif
145 facb851606f82ca2bcc760a4d91bbe33  /usr/sbin/xen-bugtool
146 EOF
147     then
148         printf "\nVerified host scripts from XenServer 5.5.900-29381p.\n\n"
149     else
150 cat <<EOF
151
152 The original XenServer scripts replaced by this package are not those
153 of any supported version of XenServer.  This could lead to unexpected
154 behavior of your server.  Unless you are sure you know what you are
155 doing, it is highly recommended that you remove this package
156 immediately after the install completes, which will restore the
157 XenServer scripts that you were previously using.
158
159 EOF
160     fi
161 fi
162
163 # On XenServer 5.5.0, we need refresh-xs-network-uuids to run whenever
164 # XAPI starts or restarts.  (On XenServer 5.6.0, XAPI calls the
165 # "update" method of the vswitch-cfg-update plugin whenever it starts
166 # or restarts, so this is no longer necessary.)
167 if test "$PRODUCT_VERSION" = "5.5.0"; then
168     RNU=/usr/share/openvswitch/scripts/refresh-xs-network-uuids
169     XSS=/opt/xensource/libexec/xapi-startup-script
170     if test -e $XSS && (test ! -L $XSS || test "`readlink $XSS`" != $RNU); then
171         echo "$XSS is already in use, refusing to overwrite"
172         exit 1
173     fi
174     rm -f $XSS
175     ln -s $RNU $XSS
176
177     # If /etc/xensource/network.conf doesn't exist (it was added in 5.6.0),
178     # then interface-reconfigure will be unhappy when we run it below.
179     if test ! -e /etc/xensource/network.conf; then
180         echo bridge > /etc/xensource/network.conf
181     fi
182 fi
183
184
185 if test ! -e /var/xapi/network.dbcache; then
186     if test "$1" = 1; then
187         printf "Creating xapi database cache...  "
188     else
189         printf "warning: Open vSwitch is being re-installed or upgraded,\n"
190         printf "         but the xapi database cache is missing.\n"
191         printf "Re-creating xapi database cache...  "
192     fi
193
194     if /usr/share/openvswitch/scripts/interface-reconfigure rewrite; then
195         printf "done.\n"
196     else
197         printf "FAILED\n"
198         printf "Open vSwitch can only be installed on a XenServer that\n"
199         printf "has connectivity to xapi on the pool master.  Please\n"
200         printf "fix connectivity to the pool master, then try again.\n"
201         exit 1
202     fi
203 fi
204
205 # Ensure that modprobe will find our modules.
206 depmod %{xen_version}
207
208 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
209     cat >>/etc/sysctl.conf <<EOF
210 # This works around an issue in xhad, which binds to a particular
211 # Ethernet device, which in turn causes ICMP port unreachable messages
212 # if packets are received are on the wrong interface, which in turn
213 # can happen if we send out ARP replies on every interface (as Linux
214 # does by default) instead of just on the interface that has the IP
215 # address being ARPed for, which this sysctl setting in turn works
216 # around.
217 #
218 # Bug #1378.
219 net.ipv4.conf.all.arp_filter = 1
220 EOF
221 fi
222
223 if test ! -e /etc/openvswitch/conf.db; then
224     install -d -m 755 -o root -g root /etc/openvswitch
225
226     # Create ovs-vswitchd config database
227     ovsdb-tool -vANY:console:emer create /etc/openvswitch/conf.db \
228             /usr/share/openvswitch/vswitch.ovsschema
229
230     # Create initial table in config database
231     ovsdb-tool -vANY:console:emer transact /etc/openvswitch/conf.db \
232             '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
233             > /dev/null
234 fi
235
236 # Create default or update existing /etc/sysconfig/openvswitch.
237 SYSCONFIG=/etc/sysconfig/openvswitch
238 TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template
239 if [ ! -e $SYSCONFIG ]; then
240     cp $TEMPLATE $SYSCONFIG
241 else
242     for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
243     do
244         if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
245             echo >> $SYSCONFIG
246             sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
247         fi
248     done
249 fi
250
251 # Replace XenServer files by our versions.
252 mkdir -p /usr/lib/openvswitch/xs-original \
253     || printf "Could not create script backup directory.\n"
254 for f in \
255     /opt/xensource/libexec/interface-reconfigure \
256     /opt/xensource/libexec/InterfaceReconfigure.py \
257     /opt/xensource/libexec/InterfaceReconfigureBridge.py \
258     /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
259     /etc/xensource/scripts/vif \
260     /usr/sbin/xen-bugtool \
261     /usr/sbin/brctl
262 do
263     s=$(basename "$f")
264     t=$(readlink "$f")
265     if [ -f "$f" ] && [ "$t" != "/usr/share/openvswitch/scripts/$s" ]; then
266         mv "$f" /usr/lib/openvswitch/xs-original/ \
267             || printf "Could not save original XenServer $s script\n"
268         ln -s "/usr/share/openvswitch/scripts/$s" "$f" \
269             || printf "Could not link to Open vSwitch $s script\n"
270     fi
271 done
272
273 # Ensure all required services are set to run
274 for s in openvswitch openvswitch-xapi-update; do
275     if chkconfig --list $s >/dev/null 2>&1; then
276         chkconfig --del $s || printf "Could not remove $s init script."
277     fi
278     chkconfig --add $s || printf "Could not add $s init script."
279     chkconfig $s on || printf "Could not enable $s init script."
280 done
281
282 # Configure system to use Open vSwitch
283 echo vswitch > /etc/xensource/network.conf
284
285 if [ "$1" = "1" ]; then    # $1 = 2 for upgrade
286     printf "\nYou MUST reboot the server NOW to complete the change to\n"
287     printf "Open vSwitch.  Attempts to modify networking on the server\n"
288     printf "or any hosted VM will fail until after the reboot and could\n"
289     printf "leave the server in an state requiring manual recovery.\n\n"
290 else
291     printf "\nTo use the new Open vSwitch install, you should reboot the\n" 
292     printf "server now.  Failure to do so may result in incorrect operation."
293     printf "\n\n"
294 fi
295
296 %preun
297 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
298     for s in openvswitch openvswitch-xapi-update; do
299         chkconfig --del $s || printf "Could not remove $s init script."
300     done
301 fi
302
303
304 %postun
305 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
306     . /etc/xensource-inventory
307     if test "$PRODUCT_VERSION" = "5.5.0"; then
308         XSS=/opt/xensource/libexec/xapi-startup-script
309         rm -f $XSS
310     fi
311
312     rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
313         /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo
314
315     rm -f /usr/share/openvswitch/scripts/InterfaceReconfigure.pyc \
316         /usr/share/openvswitch/scripts/InterfaceReconfigure.pyo \
317         /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyc \
318         /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyo \
319         /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyc \
320         /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyo 
321
322     # Restore original XenServer scripts
323     for f in \
324         /opt/xensource/libexec/interface-reconfigure \
325         /opt/xensource/libexec/InterfaceReconfigure.py \
326         /opt/xensource/libexec/InterfaceReconfigureBridge.py \
327         /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
328         /etc/xensource/scripts/vif \
329         /usr/sbin/xen-bugtool \
330         /usr/sbin/brctl
331     do
332         s=$(basename "$f")
333         if [ ! -f "/usr/lib/openvswitch/xs-original/$s" ]; then
334             printf "Original XenServer $s script not present in /usr/lib/openvswitch/xs-original\n"
335             printf "Could not restore original XenServer script.\n"
336         else
337             (rm -f "$f" \
338                 && mv "/usr/lib/openvswitch/xs-original/$s" "$f") \
339                 || printf "Could not restore original XenServer $s script.\n"
340         fi
341     done
342
343     # Remove all configuration files
344     rm -f /etc/openvswitch/conf.db
345     rm -f /etc/sysconfig/openvswitch
346     rm -f /etc/openvswitch/vswitchd.cacert
347     rm -f /var/xapi/network.dbcache
348
349     if test "$PRODUCT_VERSION" != "5.5.0"; then
350         # Configure system to use bridge
351         echo bridge > /etc/xensource/network.conf
352     else
353         # Get rid of network.conf entirely, to make the system pristine.
354         rm -f /etc/xensource/network.conf
355     fi
356
357     printf "\nYou MUST reboot the server now to complete the change to\n"
358     printf "standard Xen networking.  Attempts to modify networking on the\n"
359     printf "server or any hosted VM will fail until after the reboot and\n"
360     printf "could leave the server in a state requiring manual recovery.\n\n"
361 fi
362
363
364 %files
365 %defattr(-,root,root)
366 /etc/init.d/openvswitch
367 /etc/init.d/openvswitch-xapi-update
368 /etc/xapi.d/plugins/openvswitch-cfg-update
369 /etc/logrotate.d/openvswitch
370 /etc/profile.d/openvswitch.sh
371 /lib/modules/%{xen_version}/kernel/extra/openvswitch/openvswitch_mod.ko
372 /lib/modules/%{xen_version}/kernel/extra/openvswitch/brcompat_mod.ko
373 /usr/share/openvswitch/python/ovs/__init__.py
374 /usr/share/openvswitch/python/ovs/daemon.py
375 /usr/share/openvswitch/python/ovs/db/__init__.py
376 /usr/share/openvswitch/python/ovs/db/data.py
377 /usr/share/openvswitch/python/ovs/db/error.py
378 /usr/share/openvswitch/python/ovs/db/idl.py
379 /usr/share/openvswitch/python/ovs/db/parser.py
380 /usr/share/openvswitch/python/ovs/db/schema.py
381 /usr/share/openvswitch/python/ovs/db/types.py
382 /usr/share/openvswitch/python/ovs/dirs.py
383 /usr/share/openvswitch/python/ovs/fatal_signal.py
384 /usr/share/openvswitch/python/ovs/json.py
385 /usr/share/openvswitch/python/ovs/jsonrpc.py
386 /usr/share/openvswitch/python/ovs/ovsuuid.py
387 /usr/share/openvswitch/python/ovs/poller.py
388 /usr/share/openvswitch/python/ovs/process.py
389 /usr/share/openvswitch/python/ovs/reconnect.py
390 /usr/share/openvswitch/python/ovs/socket_util.py
391 /usr/share/openvswitch/python/ovs/stream.py
392 /usr/share/openvswitch/python/ovs/timeval.py
393 /usr/share/openvswitch/python/ovs/util.py
394 /usr/share/openvswitch/python/uuid.py
395 /usr/share/openvswitch/scripts/monitor-external-ids
396 /usr/share/openvswitch/scripts/refresh-xs-network-uuids
397 /usr/share/openvswitch/scripts/interface-reconfigure
398 /usr/share/openvswitch/scripts/InterfaceReconfigure.py
399 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
400 /usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
401 /usr/share/openvswitch/scripts/vif
402 /usr/share/openvswitch/scripts/xen-bugtool
403 /usr/share/openvswitch/scripts/brctl
404 /usr/share/openvswitch/scripts/sysconfig.template
405 /usr/share/openvswitch/vswitch.ovsschema
406 /usr/sbin/ovs-brcompatd
407 /usr/sbin/ovs-vswitchd
408 /usr/sbin/ovsdb-server
409 /usr/bin/ovs-appctl
410 /usr/bin/ovs-dpctl
411 /usr/bin/ovs-ofctl
412 /usr/bin/ovs-vsctl
413 /usr/bin/ovsdb-client
414 /usr/bin/ovsdb-tool
415 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
416 /usr/share/man/man1/ovsdb-client.1.gz
417 /usr/share/man/man1/ovsdb-server.1.gz
418 /usr/share/man/man1/ovsdb-tool.1.gz
419 /usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
420 /usr/share/man/man8/ovs-appctl.8.gz
421 /usr/share/man/man8/ovs-brcompatd.8.gz
422 /usr/share/man/man8/ovs-dpctl.8.gz
423 /usr/share/man/man8/ovs-ofctl.8.gz
424 /usr/share/man/man8/ovs-parse-leaks.8.gz
425 /usr/share/man/man8/ovs-vsctl.8.gz
426 /usr/share/man/man8/ovs-vswitchd.8.gz
427 /var/lib/openvswitch
428 %exclude /usr/lib/xsconsole/plugins-base/*.py[co]
429 %exclude /usr/share/openvswitch/scripts/*.py[co]
430 %exclude /usr/share/openvswitch/python/*.py[co]
431 %exclude /usr/share/openvswitch/python/ovs/*.py[co]
432 %exclude /usr/share/openvswitch/python/ovs/db/*.py[co]