#include <asm/arch/regs-serial.h>
-#include "s3c2410.h"
#include "devs.h"
#include "cpu.h"
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-/* base baud rate for all our UARTs */
-static unsigned long smdk2410_serial_clock = 24*1000*1000;
-
static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
[0] = {
.hwport = 0,
.flags = 0,
- .clock = &smdk2410_serial_clock,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
[1] = {
.hwport = 1,
.flags = 0,
- .clock = &smdk2410_serial_clock,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
[2] = {
.hwport = 2,
.flags = 0,
- .clock = &smdk2410_serial_clock,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
&s3c_device_iis,
};
-static struct s3c2410_board smdk2410_board __initdata = {
+static struct s3c24xx_board smdk2410_board __initdata = {
.devices = smdk2410_devices,
.devices_count = ARRAY_SIZE(smdk2410_devices)
};
void __init smdk2410_map_io(void)
{
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
- s3c2410_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
- s3c2410_set_board(&smdk2410_board);
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ s3c24xx_set_board(&smdk2410_board);
}
void __init smdk2410_init_irq(void)
{
- s3c2410_init_irq();
-}
-
-void __init smdk2410_init_time(void)
-{
- s3c2410_init_time();
+ s3c24xx_init_irq();
}
MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
MAPIO(smdk2410_map_io)
INITIRQ(smdk2410_init_irq)
- INITTIME(smdk2410_init_time)
+ .timer = &s3c24xx_timer,
MACHINE_END