extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/ );
-extern char *saved_command_line;
extern char m68k_debug_device[];
static void q40_mem_console_write(struct console *co, const char *b,
unsigned int count);
}
#endif
-void q40_reset()
+void q40_reset(void)
{
halted=1;
printk ("\n\n*******************************************\n"
Q40_LED_ON();
while(1) ;
}
-void q40_halt()
+void q40_halt(void)
{
halted=1;
printk ("\n\n*******************\n"
void q40_disable_irqs(void)
{
unsigned i,j;
-
+
j=0;
while((i=serports[j++])) outb(0,i+UART_IER);
master_outb(0,EXT_ENABLE_REG);
{
mach_sched_init = q40_sched_init;
- mach_init_IRQ = q40_init_IRQ;
- mach_gettimeoffset = q40_gettimeoffset;
- mach_hwclk = q40_hwclk;
+ mach_init_IRQ = q40_init_IRQ;
+ mach_gettimeoffset = q40_gettimeoffset;
+ mach_hwclk = q40_hwclk;
mach_get_ss = q40_get_ss;
mach_get_rtc_pll = q40_get_rtc_pll;
mach_set_rtc_pll = q40_set_rtc_pll;
mach_set_clock_mmss = q40_set_clock_mmss;
mach_reset = q40_reset;
- mach_free_irq = q40_free_irq;
+ mach_free_irq = q40_free_irq;
mach_process_int = q40_process_int;
mach_get_irq_list = show_q40_interrupts;
mach_request_irq = q40_request_irq;
q40_disable_irqs();
/* no DMA at all, but ide-scsi requires it.. make sure
- * all physical RAM fits into the boundary - otherwise
+ * all physical RAM fits into the boundary - otherwise
* allocator may play costly and useless tricks */
- mach_max_dma_address = 1024*1024*1024;
+ mach_max_dma_address = 1024*1024*1024;
/* useful for early debugging stages - writes kernel messages into SRAM */
if (!strncmp( m68k_debug_device,"mem",3 ))
t->tm_sec = bcd2bin (Q40_RTC_SECS);
Q40_RTC_CTRL &= ~(Q40_RTC_READ);
-
+
if (t->tm_year < 70)
t->tm_year += 100;
t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
return 0;
}
-unsigned int q40_get_ss()
+unsigned int q40_get_ss(void)
{
return bcd2bin(Q40_RTC_SECS);
}
if ((rtc_minutes < real_minutes
? real_minutes - rtc_minutes
: rtc_minutes - real_minutes) < 30)
- {
+ {
Q40_RTC_CTRL |= Q40_RTC_WRITE;
Q40_RTC_MINS = bin2bcd(real_minutes);
Q40_RTC_SECS = bin2bcd(real_seconds);