* Media Labs LML33/LML33R10.
*
* This part handles device access (PCI/I2C/codec/...)
- *
+ *
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
*
* Currently maintained by:
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
reg |= (HorDcm << ZR36057_VFESPFR_HorDcm);
reg |= (VerDcm << ZR36057_VFESPFR_VerDcm);
reg |= (DispMode << ZR36057_VFESPFR_DispMode);
- if (format->palette != VIDEO_PALETTE_YUV422)
+ if (format->palette != VIDEO_PALETTE_YUV422 && format->palette != VIDEO_PALETTE_YUYV)
reg |= ZR36057_VFESPFR_LittleEndian;
/* RJ: I don't know, why the following has to be the opposite
* of the corresponding ZR36060 setting, but only this way
reg |= ZR36057_VFESPFR_TopField;
switch (format->palette) {
+ case VIDEO_PALETTE_YUYV:
case VIDEO_PALETTE_YUV422:
reg |= ZR36057_VFESPFR_YUV422;
break;
/* (Ronald) don't write this if overlay_mask = NULL */
if (zr->overlay_mask) {
/* Write overlay clipping mask data, but don't enable overlay clipping */
- /* RJ: since this makes only sense on the screen, we use
+ /* RJ: since this makes only sense on the screen, we use
* zr->overlay_settings.width instead of video_width */
mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
* All error messages are internal driver checking only! */
/* video display top and bottom registers */
- reg = (u32) zr->buffer.base +
+ reg = (long) zr->buffer.base +
zr->overlay_settings.x *
((zr->overlay_settings.format->depth + 7) / 8) +
zr->overlay_settings.y *
if (zr->card.vfe_pol.hsync_pol)
btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
else
- btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
+ btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) |
(tvn->Wt << ZR36057_HSP_LineTot);
btwrite(reg, ZR36057_HSP);
reg = ((zr->jpg_settings.img_x +
- tvn->HStart + 4) << ZR36057_FHAP_NAX) |
+ tvn->HStart + 4) << ZR36057_FHAP_NAX) |
(zr->jpg_settings.img_width << ZR36057_FHAP_PAX);
btwrite(reg, ZR36057_FHAP);
if (zr->JPEG_error != 1) {
/*
* First entry: error just happened during normal operation
- *
+ *
* In BUZ_MODE_MOTION_COMPRESS:
- *
+ *
* Possible glitch in TV signal. In this case we should
* stop the codec and wait for good quality signal before
* restarting it to avoid further problems
- *
+ *
* In BUZ_MODE_MOTION_DECOMPRESS:
- *
+ *
* Bad JPEG frame: we have to mark it as processed (codec crashed
* and was not able to do it itself), and to remove it from queue.
*/
irqreturn_t
zoran_irq (int irq,
- void *dev_id,
- struct pt_regs *regs)
+ void *dev_id)
{
u32 stat, astat;
int count;
struct zoran *zr;
unsigned long flags;
- zr = (struct zoran *) dev_id;
+ zr = dev_id;
count = 0;
if (zr->testing) {