* by the bootloader or in the platform init code.
*
* The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2,
- * and so on). So the PSC1 is mapped to /dev/ttyS0, PSC2 to /dev/ttyS1 and so
- * on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly for
- * the console code : without this 1:1 mapping, at early boot time, when we are
- * parsing the kernel args console=ttyS?, we wouldn't know wich PSC it will be
- * mapped to.
+ * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
+ * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
+ * fpr the console code : without this 1:1 mapping, at early boot time, when we
+ * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
+ * will be mapped to.
*/
#include <linux/config.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
+/* We've been assigned a range on the "Low-density serial ports" major */
+#define SERIAL_PSC_MAJOR 204
+#define SERIAL_PSC_MINOR 148
+
#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */
}
static void
-mpc52xx_uart_stop_tx(struct uart_port *port, unsigned int tty_stop)
+mpc52xx_uart_stop_tx(struct uart_port *port)
{
/* port->lock taken by caller */
port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
}
static void
-mpc52xx_uart_start_tx(struct uart_port *port, unsigned int tty_start)
+mpc52xx_uart_start_tx(struct uart_port *port)
{
/* port->lock taken by caller */
port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
mpc52xx_uart_int_rx_chars(struct uart_port *port, struct pt_regs *regs)
{
struct tty_struct *tty = port->info->tty;
- unsigned char ch;
+ unsigned char ch, flag;
unsigned short status;
/* While we can read, do so ! */
while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
MPC52xx_PSC_SR_RXRDY) {
- /* If we are full, just stop reading */
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
-
/* Get the char */
ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8);
#endif
/* Store it */
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = 0;
+
+ flag = TTY_NORMAL;
port->icount.rx++;
if ( status & (MPC52xx_PSC_SR_PE |
MPC52xx_PSC_SR_FE |
- MPC52xx_PSC_SR_RB |
- MPC52xx_PSC_SR_OE) ) {
+ MPC52xx_PSC_SR_RB) ) {
if (status & MPC52xx_PSC_SR_RB) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
uart_handle_break(port);
} else if (status & MPC52xx_PSC_SR_PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & MPC52xx_PSC_SR_FE)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
- if (status & MPC52xx_PSC_SR_OE) {
- /*
- * Overrun is special, since it's
- * reported immediately, and doesn't
- * affect the current character
- */
- if (tty->flip.count < (TTY_FLIPBUF_SIZE-1)) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
+ flag = TTY_FRAME;
/* Clear error condition */
out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT);
}
-
- tty->flip.char_buf_ptr++;
- tty->flip.flag_buf_ptr++;
- tty->flip.count++;
-
+ tty_insert_flip_char(tty, ch, flag);
+ if (status & MPC52xx_PSC_SR_OE) {
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
}
tty_flip_buffer_push(tty);
/* Nothing to do ? */
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- mpc52xx_uart_stop_tx(port,0);
+ mpc52xx_uart_stop_tx(port);
return 0;
}
/* Maybe we're done after all */
if (uart_circ_empty(xmit)) {
- mpc52xx_uart_stop_tx(port,0);
+ mpc52xx_uart_stop_tx(port);
return 0;
}
udelay(1);
/* Write all the chars */
- for ( i=0 ; i<count ; i++ ) {
-
- /* Send the char */
- out_8(&psc->mpc52xx_psc_buffer_8, *s);
-
+ for (i = 0; i < count; i++, s++) {
/* Line return handling */
- if ( *s++ == '\n' )
+ if (*s == '\n')
out_8(&psc->mpc52xx_psc_buffer_8, '\r');
+ /* Send the char */
+ out_8(&psc->mpc52xx_psc_buffer_8, *s);
+
/* Wait the TX buffer to be empty */
j = 20000; /* Maximum wait */
while (!(in_be16(&psc->mpc52xx_psc_status) &
}
-extern struct uart_driver mpc52xx_uart_driver;
+static struct uart_driver mpc52xx_uart_driver;
static struct console mpc52xx_console = {
- .name = "ttyS",
+ .name = "ttyPSC",
.write = mpc52xx_console_write,
.device = uart_console_device,
.setup = mpc52xx_console_setup,
.flags = CON_PRINTBUFFER,
- .index = -1, /* Specified on the cmdline (e.g. console=ttyS0 ) */
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0 ) */
.data = &mpc52xx_uart_driver,
};
static struct uart_driver mpc52xx_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "mpc52xx_psc_uart",
- .dev_name = "ttyS",
- .devfs_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
+ .dev_name = "ttyPSC",
+ .devfs_name = "ttyPSC",
+ .major = SERIAL_PSC_MAJOR,
+ .minor = SERIAL_PSC_MINOR,
.nr = MPC52xx_PSC_MAXNUM,
.cons = MPC52xx_PSC_CONSOLE,
};
/* ======================================================================== */
static int __devinit
-mpc52xx_uart_probe(struct device *dev)
+mpc52xx_uart_probe(struct platform_device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct resource *res = pdev->resource;
+ struct resource *res = dev->resource;
struct uart_port *port = NULL;
int i, idx, ret;
/* Check validity & presence */
- idx = pdev->id;
+ idx = dev->id;
if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
return -EINVAL;
port->ops = &mpc52xx_uart_ops;
/* Search for IRQ and mapbase */
- for (i=0 ; i<pdev->num_resources ; i++, res++) {
+ for (i=0 ; i<dev->num_resources ; i++, res++) {
if (res->flags & IORESOURCE_MEM)
port->mapbase = res->start;
else if (res->flags & IORESOURCE_IRQ)
/* Add the port to the uart sub-system */
ret = uart_add_one_port(&mpc52xx_uart_driver, port);
if (!ret)
- dev_set_drvdata(dev, (void*)port);
+ platform_set_drvdata(dev, (void*)port);
return ret;
}
static int
-mpc52xx_uart_remove(struct device *dev)
+mpc52xx_uart_remove(struct platform_device *dev)
{
- struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
+ struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
- dev_set_drvdata(dev, NULL);
+ platform_set_drvdata(dev, NULL);
if (port)
uart_remove_one_port(&mpc52xx_uart_driver, port);
#ifdef CONFIG_PM
static int
-mpc52xx_uart_suspend(struct device *dev, u32 state, u32 level)
+mpc52xx_uart_suspend(struct platform_device *dev, pm_message_t state)
{
- struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
+ struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&mpc52xx_uart_driver, port);
return 0;
}
static int
-mpc52xx_uart_resume(struct device *dev, u32 level)
+mpc52xx_uart_resume(struct platform_device *dev)
{
- struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
+ struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
- if (port && level == RESUME_ENABLE)
+ if (port)
uart_resume_port(&mpc52xx_uart_driver, port);
return 0;
}
#endif
-static struct device_driver mpc52xx_uart_platform_driver = {
- .name = "mpc52xx-psc",
- .bus = &platform_bus_type,
+static struct platform_driver mpc52xx_uart_platform_driver = {
.probe = mpc52xx_uart_probe,
.remove = mpc52xx_uart_remove,
#ifdef CONFIG_PM
.suspend = mpc52xx_uart_suspend,
.resume = mpc52xx_uart_resume,
#endif
+ .driver = {
+ .name = "mpc52xx-psc",
+ },
};
ret = uart_register_driver(&mpc52xx_uart_driver);
if (ret == 0) {
- ret = driver_register(&mpc52xx_uart_platform_driver);
+ ret = platform_driver_register(&mpc52xx_uart_platform_driver);
if (ret)
uart_unregister_driver(&mpc52xx_uart_driver);
}
static void __exit
mpc52xx_uart_exit(void)
{
- driver_unregister(&mpc52xx_uart_platform_driver);
+ platform_driver_unregister(&mpc52xx_uart_platform_driver);
uart_unregister_driver(&mpc52xx_uart_driver);
}