* Karl Lessard <klessard@sunrisetelecom.com>
* <c.pellegrin@exadron.com>
*
+ * PM support added by Rodolfo Giometti <giometti@linux.it>
+ * Cursor enable/disable by Rodolfo Giometti <giometti@linux.it>
+ *
* Copyright 2002 MontaVista Software
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
static struct au1100fb_drv_info drv_info;
+static int nocursor = 0;
+module_param(nocursor, int, 0644);
+MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+
/*
* Set hardware with var settings. This will enable the controller with a specific
* mode, normally validated with the fb_check_var method
info->fix.visual = FB_VISUAL_TRUECOLOR;
info->fix.line_length = info->var.xres_virtual << 1; /* depth=16 */
- }
+ }
} else {
/* mono */
info->fix.visual = FB_VISUAL_MONO10;
}
info->screen_size = info->fix.line_length * info->var.yres_virtual;
+ info->var.rotate = ((fbdev->panel->control_base&LCD_CONTROL_SM_MASK) \
+ >> LCD_CONTROL_SM_BIT) * 90;
/* Determine BPP mode and format */
- fbdev->regs->lcd_control = fbdev->panel->control_base |
- ((info->var.rotate/90) << LCD_CONTROL_SM_BIT);
-
- fbdev->regs->lcd_intenable = 0;
- fbdev->regs->lcd_intstatus = 0;
-
+ fbdev->regs->lcd_control = fbdev->panel->control_base;
fbdev->regs->lcd_horztiming = fbdev->panel->horztiming;
-
fbdev->regs->lcd_verttiming = fbdev->panel->verttiming;
-
fbdev->regs->lcd_clkcontrol = fbdev->panel->clkcontrol_base;
-
+ fbdev->regs->lcd_intenable = 0;
+ fbdev->regs->lcd_intstatus = 0;
fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(fbdev->fb_phys);
if (panel_is_dual(fbdev->panel)) {
/* Resume controller */
fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+ mdelay(10);
+ au1100fb_fb_blank(VESA_NO_BLANKING, info);
return 0;
}
*/
int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
- u32 *palette = fbdev->regs->lcd_pallettebase;
+ struct au1100fb_device *fbdev;
+ u32 *palette;
u32 value;
+ fbdev = to_au1100fb_device(fbi);
+ palette = fbdev->regs->lcd_pallettebase;
+
if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
return -EINVAL;
*/
int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ struct au1100fb_device *fbdev;
int dy;
+ fbdev = to_au1100fb_device(fbi);
+
print_dbg("fb_pan_display %p %p", var, fbi);
if (!var || !fbdev) {
*/
int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ struct au1100fb_device *fbdev;
unsigned int len;
unsigned long start=0, off;
+ fbdev = to_au1100fb_device(fbi);
+
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
return -EINVAL;
}
return 0;
}
+/* fb_cursor
+ * Used to disable cursor drawing...
+ */
+int au1100fb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ if (nocursor)
+ return 0;
+ else
+ return -EINVAL; /* just to force soft_cursor() call */
+}
+
static struct fb_ops au1100fb_ops =
{
.owner = THIS_MODULE,
.fb_imageblit = cfb_imageblit,
.fb_rotate = au1100fb_fb_rotate,
.fb_mmap = au1100fb_fb_mmap,
+ .fb_cursor = au1100fb_fb_cursor,
};
if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
DRIVER_NAME)) {
- print_err("fail to lock memory region at 0x%08x",
+ print_err("fail to lock memory region at 0x%08lx",
au1100fb_fix.mmio_start);
return -EBUSY;
}
return 0;
}
-int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level)
+#ifdef CONFIG_PM
+static u32 sys_clksrc;
+static struct au1100fb_regs fbregs;
+
+int au1100fb_drv_suspend(struct device *dev, pm_message_t state)
{
- /* TODO */
+ struct au1100fb_device *fbdev = dev_get_drvdata(dev);
+
+ if (!fbdev)
+ return 0;
+
+ /* Save the clock source state */
+ sys_clksrc = au_readl(SYS_CLKSRC);
+
+ /* Blank the LCD */
+ au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
+
+ /* Stop LCD clocking */
+ au_writel(sys_clksrc & ~SYS_CS_ML_MASK, SYS_CLKSRC);
+
+ memcpy(&fbregs, fbdev->regs, sizeof(struct au1100fb_regs));
+
return 0;
}
-int au1100fb_drv_resume(struct device *dev, u32 level)
+int au1100fb_drv_resume(struct device *dev)
{
- /* TODO */
+ struct au1100fb_device *fbdev = dev_get_drvdata(dev);
+
+ if (!fbdev)
+ return 0;
+
+ memcpy(fbdev->regs, &fbregs, sizeof(struct au1100fb_regs));
+
+ /* Restart LCD clocking */
+ au_writel(sys_clksrc, SYS_CLKSRC);
+
+ /* Unblank the LCD */
+ au1100fb_fb_blank(VESA_NO_BLANKING, &fbdev->info);
+
return 0;
}
+#else
+#define au1100fb_drv_suspend NULL
+#define au1100fb_drv_resume NULL
+#endif
static struct device_driver au1100fb_driver = {
.name = "au1100-lcd",
if (options) {
while ((this_opt = strsep(&options,",")) != NULL) {
/* Panel option */
- if (!strncmp(this_opt, "panel:", 6)) {
+ if (!strncmp(this_opt, "panel:", 6)) {
int i;
this_opt += 6;
for (i = 0; i < num_panels; i++) {
known_lcd_panels[i].name,
strlen(this_opt))) {
panel_idx = i;
- break;
+ break;
+ }
}
- }
if (i >= num_panels) {
print_warn("Panel %s not supported!", this_opt);
}
}
+ if (!strncmp(this_opt, "nocursor", 8)) {
+ this_opt += 8;
+ nocursor = 1;
+ print_info("Cursor disabled");
+ }
/* Mode option (only option that start with digit) */
else if (isdigit(this_opt[0])) {
mode = kmalloc(strlen(this_opt) + 1, GFP_KERNEL);
/* Unsupported option */
else {
print_warn("Unsupported option \"%s\"", this_opt);
- }
+ }
}
}
{
driver_unregister(&au1100fb_driver);
- if (drv_info.opt_mode)
- kfree(drv_info.opt_mode);
+ kfree(drv_info.opt_mode);
}
module_init(au1100fb_init);