diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_80003es2lan.c linux-2.6.22-10/drivers/net/e1000e/e1000_80003es2lan.c
--- linux-2.6.22-0/drivers/net/e1000e/e1000_80003es2lan.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_80003es2lan.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,1545 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_80003es2lan.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,1474 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+
+*******************************************************************************/
+
-+/* e1000_80003es2lan
++/*
++ * 80003ES2LAN Gigabit Ethernet Controller (Copper)
++ * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
+ */
+
-+#include "e1000_hw.h"
++#include "e1000.h"
+
+static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_init_mac_params_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw);
-+static s32 e1000_acquire_mac_csr_80003es2lan(struct e1000_hw *hw);
+static void e1000_release_phy_80003es2lan(struct e1000_hw *hw);
-+static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw);
+static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
+static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
+static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
-+static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 *data);
-+static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 data);
++static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
++ u16 *data);
++static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
++ u16 data);
+static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw);
+static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
+/**
+ * e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs.
+ * @hw: pointer to the HW structure
-+ *
-+ * This is a function pointer entry point called by the api module.
+ **/
+static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_init_phy_params_80003es2lan");
-+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ phy->type = e1000_phy_none;
+ goto out;
+
+ phy->ops.acquire = e1000_acquire_phy_80003es2lan;
+ phy->ops.check_polarity = e1000_check_polarity_m88;
-+ phy->ops.check_reset_block = e1000_check_reset_block_generic;
-+ phy->ops.commit = e1000_phy_sw_reset_generic;
++ phy->ops.check_reset_block = e1000e_check_reset_block_generic;
++ phy->ops.commit = e1000e_phy_sw_reset;
+ phy->ops.get_cfg_done = e1000_get_cfg_done_80003es2lan;
-+ phy->ops.get_info = e1000_get_phy_info_m88;
++ phy->ops.get_info = e1000e_get_phy_info_m88;
+ phy->ops.release = e1000_release_phy_80003es2lan;
-+ phy->ops.reset = e1000_phy_hw_reset_generic;
-+ phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic;
++ phy->ops.reset = e1000e_phy_hw_reset_generic;
++ phy->ops.set_d3_lplu_state = e1000e_set_d3_lplu_state;
+
+ phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan;
+ phy->ops.get_cable_length = e1000_get_cable_length_80003es2lan;
+ phy->ops.cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan;
+
+ /* This can only be done after all function pointers are setup. */
-+ ret_val = e1000_get_phy_id(hw);
++ ret_val = e1000e_get_phy_id(hw);
+
+ /* Verify phy id */
+ if (phy->id != GG82563_E_PHY_ID) {
+/**
+ * e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs.
+ * @hw: pointer to the HW structure
-+ *
-+ * This is a function pointer entry point called by the api module.
+ **/
+static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ u32 eecd = E1000_READ_REG(hw, E1000_EECD);
++ u32 eecd = er32(EECD);
+ u16 size;
+
-+ DEBUGFUNC("e1000_init_nvm_params_80003es2lan");
-+
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+ switch (nvm->override) {
+
+ /* Function Pointers */
+ nvm->ops.acquire = e1000_acquire_nvm_80003es2lan;
-+ nvm->ops.read = e1000_read_nvm_eerd;
++ nvm->ops.read = e1000e_read_nvm_eerd;
+ nvm->ops.release = e1000_release_nvm_80003es2lan;
-+ nvm->ops.update = e1000_update_nvm_checksum_generic;
-+ nvm->ops.valid_led_default = e1000_valid_led_default_generic;
-+ nvm->ops.validate = e1000_validate_nvm_checksum_generic;
++ nvm->ops.update = e1000e_update_nvm_checksum_generic;
++ nvm->ops.valid_led_default = e1000e_valid_led_default;
++ nvm->ops.validate = e1000e_validate_nvm_checksum_generic;
+ nvm->ops.write = e1000_write_nvm_80003es2lan;
+
+ return E1000_SUCCESS;
+/**
+ * e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
+ * @hw: pointer to the HW structure
-+ *
-+ * This is a function pointer entry point called by the api module.
+ **/
+static s32 e1000_init_mac_params_80003es2lan(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_init_mac_params_80003es2lan");
-+
+ /* Set media type */
+ switch (hw->device_id) {
+ case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
+ mac->asf_firmware_present = true;
+ /* Set if manageability features are enabled. */
+ mac->arc_subsystem_valid =
-+ (E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK)
++ (er32(FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+
+ /* Function pointers */
+
+ /* bus type/speed/width */
-+ mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic;
++ mac->ops.get_bus_info = e1000e_get_bus_info_pcie;
+ /* reset */
+ mac->ops.reset_hw = e1000_reset_hw_80003es2lan;
+ /* hw initialization */
+ mac->ops.init_hw = e1000_init_hw_80003es2lan;
+ /* link setup */
-+ mac->ops.setup_link = e1000_setup_link_generic;
++ mac->ops.setup_link = e1000e_setup_link;
+ /* physical interface link setup */
+ mac->ops.setup_physical_interface =
+ (hw->phy.media_type == e1000_media_type_copper)
+ ? e1000_setup_copper_link_80003es2lan
-+ : e1000_setup_fiber_serdes_link_generic;
++ : e1000e_setup_fiber_serdes_link;
+ /* check for link */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
-+ mac->ops.check_for_link = e1000_check_for_copper_link_generic;
++ mac->ops.check_for_link = e1000e_check_for_copper_link;
+ break;
+ case e1000_media_type_fiber:
-+ mac->ops.check_for_link = e1000_check_for_fiber_link_generic;
++ mac->ops.check_for_link = e1000e_check_for_fiber_link;
+ break;
+ case e1000_media_type_internal_serdes:
-+ mac->ops.check_for_link = e1000_check_for_serdes_link_generic;
++ mac->ops.check_for_link = e1000e_check_for_serdes_link;
+ break;
+ default:
+ ret_val = -E1000_ERR_CONFIG;
+ /* check management mode */
+ mac->ops.check_mng_mode = e1000_check_mng_mode_generic;
+ /* multicast address update */
-+ mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic;
++ mac->ops.update_mc_addr_list = e1000e_update_mc_addr_list_generic;
+ /* writing VFTA */
-+ mac->ops.write_vfta = e1000_write_vfta_generic;
++ mac->ops.write_vfta = e1000e_write_vfta_generic;
+ /* clearing VFTA */
-+ mac->ops.clear_vfta = e1000_clear_vfta_generic;
++ mac->ops.clear_vfta = e1000e_clear_vfta_generic;
+ /* setting MTA */
+ mac->ops.mta_set = e1000_mta_set_generic;
+ /* read mac address */
+ mac->ops.read_mac_addr = e1000_read_mac_addr_80003es2lan;
++ /* ID LED init */
++ mac->ops.id_led_init = e1000e_id_led_init;
+ /* blink LED */
-+ mac->ops.blink_led = e1000_blink_led_generic;
++ mac->ops.blink_led = e1000e_blink_led;
+ /* setup LED */
+ mac->ops.setup_led = e1000_setup_led_generic;
+ /* cleanup LED */
-+ mac->ops.cleanup_led = e1000_cleanup_led_generic;
++ mac->ops.cleanup_led = e1000e_cleanup_led_generic;
+ /* turn on/off LED */
-+ mac->ops.led_on = e1000_led_on_generic;
-+ mac->ops.led_off = e1000_led_off_generic;
-+ /* remove device */
-+ mac->ops.remove_device = e1000_remove_device_generic;
++ mac->ops.led_on = e1000e_led_on_generic;
++ mac->ops.led_off = e1000e_led_off_generic;
+ /* clear hardware counters */
+ mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_80003es2lan;
+ /* link info */
+ * e1000_init_function_pointers_80003es2lan - Init ESB2 func ptrs.
+ * @hw: pointer to the HW structure
+ *
-+ * The only function explicitly called by the api module to initialize
-+ * all function pointers and parameters.
++ * Called to initialize all function pointers and parameters.
+ **/
+void e1000_init_function_pointers_80003es2lan(struct e1000_hw *hw)
+{
-+ DEBUGFUNC("e1000_init_function_pointers_80003es2lan");
-+
+ e1000_init_mac_ops_generic(hw);
+ e1000_init_nvm_ops_generic(hw);
+ hw->mac.ops.init_params = e1000_init_mac_params_80003es2lan;
+ hw->nvm.ops.init_params = e1000_init_nvm_params_80003es2lan;
+ hw->phy.ops.init_params = e1000_init_phy_params_80003es2lan;
-+ e1000_get_bus_info_pcie_generic(hw);
++ e1000e_get_bus_info_pcie(hw);
+}
+
+/**
+ * e1000_acquire_phy_80003es2lan - Acquire rights to access PHY
+ * @hw: pointer to the HW structure
+ *
-+ * A wrapper to acquire access rights to the correct PHY. This is a
-+ * function pointer entry point called by the api module.
++ * A wrapper to acquire access rights to the correct PHY.
+ **/
+static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
+{
+ u16 mask;
+
-+ DEBUGFUNC("e1000_acquire_phy_80003es2lan");
-+
+ mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+ return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
+}
+ * e1000_release_phy_80003es2lan - Release rights to access PHY
+ * @hw: pointer to the HW structure
+ *
-+ * A wrapper to release access rights to the correct PHY. This is a
-+ * function pointer entry point called by the api module.
++ * A wrapper to release access rights to the correct PHY.
+ **/
+static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
+{
+ u16 mask;
+
-+ DEBUGFUNC("e1000_release_phy_80003es2lan");
-+
+ mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+ e1000_release_swfw_sync_80003es2lan(hw, mask);
+}
+{
+ u16 mask;
+
-+ DEBUGFUNC("e1000_acquire_mac_csr_80003es2lan");
-+
-+ mask = E1000_SWFW_CSR_SM;
++ mask = E1000_SWFW_CSR_SM;
+
+ return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
+}
+{
+ u16 mask;
+
-+ DEBUGFUNC("e1000_release_mac_csr_80003es2lan");
-+
+ mask = E1000_SWFW_CSR_SM;
+
+ e1000_release_swfw_sync_80003es2lan(hw, mask);
+ * e1000_acquire_nvm_80003es2lan - Acquire rights to access NVM
+ * @hw: pointer to the HW structure
+ *
-+ * Acquire the semaphore to access the EEPROM. This is a function
-+ * pointer entry point called by the api module.
++ * Acquire the semaphore to access the EEPROM.
+ **/
+static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
-+ DEBUGFUNC("e1000_acquire_nvm_80003es2lan");
-+
+ ret_val = e1000_acquire_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
+ if (ret_val)
+ goto out;
+
-+ ret_val = e1000_acquire_nvm_generic(hw);
++ ret_val = e1000e_acquire_nvm(hw);
+
+ if (ret_val)
+ e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
+ * e1000_release_nvm_80003es2lan - Relinquish rights to access NVM
+ * @hw: pointer to the HW structure
+ *
-+ * Release the semaphore used to access the EEPROM. This is a
-+ * function pointer entry point called by the api module.
++ * Release the semaphore used to access the EEPROM.
+ **/
+static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
+{
-+ DEBUGFUNC("e1000_release_nvm_80003es2lan");
-+
-+ e1000_release_nvm_generic(hw);
++ e1000e_release_nvm(hw);
+ e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
+}
+
+ s32 ret_val = E1000_SUCCESS;
+ s32 i = 0, timeout = 50;
+
-+ DEBUGFUNC("e1000_acquire_swfw_sync_80003es2lan");
-+
+ while (i < timeout) {
-+ if (e1000_get_hw_semaphore_generic(hw)) {
++ if (e1000e_get_hw_semaphore(hw)) {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
-+ swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
++ swfw_sync = er32(SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask)))
+ break;
+
+ * Firmware currently using resource (fwmask)
+ * or other software thread using resource (swmask)
+ */
-+ e1000_put_hw_semaphore_generic(hw);
-+ msec_delay_irq(5);
++ e1000e_put_hw_semaphore(hw);
++ mdelay(5);
+ i++;
+ }
+
+ if (i == timeout) {
-+ DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
++ e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync |= swmask;
-+ E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
++ ew32(SW_FW_SYNC, swfw_sync);
+
-+ e1000_put_hw_semaphore_generic(hw);
++ e1000e_put_hw_semaphore(hw);
+
+out:
+ return ret_val;
+{
+ u32 swfw_sync;
+
-+ DEBUGFUNC("e1000_release_swfw_sync_80003es2lan");
++ while (e1000e_get_hw_semaphore(hw) != E1000_SUCCESS)
++ ; /* Empty */
+
-+ while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS);
-+ /* Empty */
-+
-+ swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
++ swfw_sync = er32(SW_FW_SYNC);
+ swfw_sync &= ~mask;
-+ E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
++ ew32(SW_FW_SYNC, swfw_sync);
+
-+ e1000_put_hw_semaphore_generic(hw);
++ e1000e_put_hw_semaphore(hw);
+}
+
+/**
+ * @offset: offset of the register to read
+ * @data: pointer to the data returned from the operation
+ *
-+ * Read the GG82563 PHY register. This is a function pointer entry
-+ * point called by the api module.
++ * Read the GG82563 PHY register.
+ **/
+static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
+ u32 offset, u16 *data)
+ u32 page_select;
+ u16 temp;
+
-+ DEBUGFUNC("e1000_read_phy_reg_gg82563_80003es2lan");
-+
+ ret_val = e1000_acquire_phy_80003es2lan(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
-+ ret_val = e1000_write_phy_reg_mdic(hw, page_select, temp);
++ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
+ if (ret_val) {
+ e1000_release_phy_80003es2lan(hw);
+ goto out;
+ * before the device has completed the "Page Select" MDI
+ * transaction. So we wait 200us after each MDI command...
+ */
-+ usec_delay(200);
++ udelay(200);
+
+ /* ...and verify the command was successful. */
-+ ret_val = e1000_read_phy_reg_mdic(hw, page_select, &temp);
++ ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
+
+ if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
-+ usec_delay(200);
++ udelay(200);
+
-+ ret_val = e1000_read_phy_reg_mdic(hw,
-+ MAX_PHY_REG_ADDRESS & offset,
-+ data);
++ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
++ data);
+
-+ usec_delay(200);
++ udelay(200);
+ e1000_release_phy_80003es2lan(hw);
+
+out:
+ * @offset: offset of the register to read
+ * @data: value to write to the register
+ *
-+ * Write to the GG82563 PHY register. This is a function pointer entry
-+ * point called by the api module.
++ * Write to the GG82563 PHY register.
+ **/
+static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
+ u32 offset, u16 data)
+ u32 page_select;
+ u16 temp;
+
-+ DEBUGFUNC("e1000_write_phy_reg_gg82563_80003es2lan");
-+
+ ret_val = e1000_acquire_phy_80003es2lan(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
-+ ret_val = e1000_write_phy_reg_mdic(hw, page_select, temp);
++ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
+ if (ret_val) {
+ e1000_release_phy_80003es2lan(hw);
+ goto out;
+ * before the device has completed the "Page Select" MDI
+ * transaction. So we wait 200us after each MDI command...
+ */
-+ usec_delay(200);
++ udelay(200);
+
+ /* ...and verify the command was successful. */
-+ ret_val = e1000_read_phy_reg_mdic(hw, page_select, &temp);
++ ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
+
+ if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
-+ usec_delay(200);
++ udelay(200);
+
-+ ret_val = e1000_write_phy_reg_mdic(hw,
-+ MAX_PHY_REG_ADDRESS & offset,
++ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
-+ usec_delay(200);
++ udelay(200);
+ e1000_release_phy_80003es2lan(hw);
+
+out:
+ * @words: number of words to write
+ * @data: buffer of data to write to the NVM
+ *
-+ * Write "words" of data to the ESB2 NVM. This is a function
-+ * pointer entry point called by the api module.
++ * Write "words" of data to the ESB2 NVM.
+ **/
+static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
-+ DEBUGFUNC("e1000_write_nvm_80003es2lan");
-+
-+ return e1000_write_nvm_spi(hw, offset, words, data);
++ return e1000e_write_nvm_spi(hw, offset, words, data);
+}
+
+/**
+ s32 ret_val = E1000_SUCCESS;
+ u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
-+ DEBUGFUNC("e1000_get_cfg_done_80003es2lan");
-+
+ if (hw->bus.func == 1)
+ mask = E1000_NVM_CFG_DONE_PORT_1;
+
+ while (timeout) {
-+ if (E1000_READ_REG(hw, E1000_EEMNGCTL) & mask)
++ if (er32(EEMNGCTL) & mask)
+ break;
-+ msec_delay(1);
++ msleep(1);
+ timeout--;
+ }
+ if (!timeout) {
-+ DEBUGOUT("MNG configuration cycle has not completed.\n");
++ e_dbg("MNG configuration cycle has not completed.\n");
+ ret_val = -E1000_ERR_RESET;
+ goto out;
+ }
+ u16 phy_data;
+ bool link;
+
-+ DEBUGFUNC("e1000_phy_force_speed_duplex_80003es2lan");
-+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
+ * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed and duplex are forced.
+ */
-+ ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
++ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_AUTO;
-+ ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data);
++ ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
-+ DEBUGOUT1("GG82563 PSCR: %X\n", phy_data);
++ e_dbg("GG82563 PSCR: %X\n", phy_data);
+
-+ ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_data);
++ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
-+ e1000_phy_force_speed_duplex_setup(hw, &phy_data);
++ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ /* Reset the phy to commit changes. */
+ phy_data |= MII_CR_RESET;
+
-+ ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_data);
++ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
-+ usec_delay(1);
++ udelay(1);
+
+ if (hw->phy.autoneg_wait_to_complete) {
-+ DEBUGOUT("Waiting for forced speed/duplex link "
++ e_dbg("Waiting for forced speed/duplex link "
+ "on GG82563 phy.\n");
+
-+ ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
++ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ goto out;
+ * We didn't get link.
+ * Reset the DSP and cross our fingers.
+ */
-+ ret_val = e1000_phy_reset_dsp_generic(hw);
++ ret_val = e1000e_phy_reset_dsp(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Try once more */
-+ ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
++ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ goto out;
+ }
+
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
++ ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ * duplex.
+ */
+ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
-+ ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
++ ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
+
+out:
+ return ret_val;
+ s32 ret_val = E1000_SUCCESS;
+ u16 phy_data, index;
+
-+ DEBUGFUNC("e1000_get_cable_length_80003es2lan");
-+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
++ ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = phy_data & GG82563_DSPD_CABLE_LENGTH;
++
++ if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE + 5) {
++ ret_val = E1000_ERR_PHY;
++ goto out;
++ }
++
+ phy->min_cable_length = e1000_gg82563_cable_length_table[index];
+ phy->max_cable_length = e1000_gg82563_cable_length_table[index+5];
+
+ * @duplex: pointer to duplex buffer
+ *
+ * Retrieve the current speed and duplex configuration.
-+ * This is a function pointer entry point called by the api module.
+ **/
+static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ s32 ret_val;
+
-+ DEBUGFUNC("e1000_get_link_up_info_80003es2lan");
-+
+ if (hw->phy.media_type == e1000_media_type_copper) {
-+ ret_val = e1000_get_speed_and_duplex_copper_generic(hw,
++ ret_val = e1000e_get_speed_and_duplex_copper(hw,
+ speed,
+ duplex);
++ hw->phy.ops.cfg_on_link_up(hw);
+ } else {
-+ ret_val = e1000_get_speed_and_duplex_fiber_serdes_generic(hw,
++ ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw,
+ speed,
+ duplex);
+ }
+ * @hw: pointer to the HW structure
+ *
+ * Perform a global reset to the ESB2 controller.
-+ * This is a function pointer entry point called by the api module.
+ **/
+static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
+{
+ u32 ctrl, icr;
+ s32 ret_val;
+
-+ DEBUGFUNC("e1000_reset_hw_80003es2lan");
-+
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
-+ ret_val = e1000_disable_pcie_master_generic(hw);
-+ if (ret_val) {
-+ DEBUGOUT("PCI-E Master disable polling has failed.\n");
-+ }
++ ret_val = e1000e_disable_pcie_master(hw);
++ if (ret_val)
++ e_dbg("PCI-E Master disable polling has failed.\n");
+
-+ DEBUGOUT("Masking off all interrupts\n");
-+ E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
++ e_dbg("Masking off all interrupts\n");
++ ew32(IMC, 0xffffffff);
+
-+ E1000_WRITE_REG(hw, E1000_RCTL, 0);
-+ E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
-+ E1000_WRITE_FLUSH(hw);
++ ew32(RCTL, 0);
++ ew32(TCTL, E1000_TCTL_PSP);
++ e1e_flush();
+
-+ msec_delay(10);
++ msleep(10);
+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+
-+ ret_val = e1000_acquire_phy_80003es2lan(hw);
-+ DEBUGOUT("Issuing a global reset to MAC\n");
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
++ ret_val = e1000_acquire_phy_80003es2lan(hw);
++ e_dbg("Issuing a global reset to MAC\n");
++ ew32(CTRL, ctrl | E1000_CTRL_RST);
+ e1000_release_phy_80003es2lan(hw);
+
-+ ret_val = e1000_get_auto_rd_done_generic(hw);
++ ret_val = e1000e_get_auto_rd_done(hw);
+ if (ret_val)
+ /* We don't want to continue accessing MAC registers. */
+ goto out;
+
+ /* Clear any pending interrupt events. */
-+ E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
-+ icr = E1000_READ_REG(hw, E1000_ICR);
++ ew32(IMC, 0xffffffff);
++ icr = er32(ICR);
+
-+ e1000_check_alt_mac_addr_generic(hw);
++ ret_val = e1000_check_alt_mac_addr_generic(hw);
+
+out:
+ return ret_val;
+ * @hw: pointer to the HW structure
+ *
+ * Initialize the hw bits, LED, VFTA, MTA, link and hw counters.
-+ * This is a function pointer entry point called by the api module.
+ **/
+static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+
-+ DEBUGFUNC("e1000_init_hw_80003es2lan");
-+
+ e1000_initialize_hw_bits_80003es2lan(hw);
+
+ /* Initialize identification LED */
-+ ret_val = e1000_id_led_init_generic(hw);
++ ret_val = mac->ops.id_led_init(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error initializing identification LED\n");
++ e_dbg("Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
+ }
+
+ /* Disabling VLAN filtering */
-+ DEBUGOUT("Initializing the IEEE VLAN\n");
-+ mac->ops.clear_vfta(hw);
++ e_dbg("Initializing the IEEE VLAN\n");
++ e1000e_clear_vfta(hw);
+
+ /* Setup the receive address. */
-+ e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
++ e1000e_init_rx_addrs(hw, mac->rar_entry_count);
+
+ /* Zero out the Multicast HASH table */
-+ DEBUGOUT("Zeroing the MTA\n");
++ e_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+ ret_val = mac->ops.setup_link(hw);
+
+ /* Set the transmit descriptor write-back policy */
-+ reg_data = E1000_READ_REG(hw, E1000_TXDCTL(0));
++ reg_data = er32(TXDCTL(0));
+ reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(0), reg_data);
++ ew32(TXDCTL(0), reg_data);
+
+ /* ...for both queues. */
-+ reg_data = E1000_READ_REG(hw, E1000_TXDCTL(1));
++ reg_data = er32(TXDCTL(1));
+ reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(1), reg_data);
++ ew32(TXDCTL(1), reg_data);
+
+ /* Enable retransmit on late collisions */
-+ reg_data = E1000_READ_REG(hw, E1000_TCTL);
++ reg_data = er32(TCTL);
+ reg_data |= E1000_TCTL_RTLC;
-+ E1000_WRITE_REG(hw, E1000_TCTL, reg_data);
++ ew32(TCTL, reg_data);
+
+ /* Configure Gigabit Carry Extend Padding */
-+ reg_data = E1000_READ_REG(hw, E1000_TCTL_EXT);
++ reg_data = er32(TCTL_EXT);
+ reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
+ reg_data |= DEFAULT_TCTL_EXT_GCEX_80003ES2LAN;
-+ E1000_WRITE_REG(hw, E1000_TCTL_EXT, reg_data);
++ ew32(TCTL_EXT, reg_data);
+
+ /* Configure Transmit Inter-Packet Gap */
-+ reg_data = E1000_READ_REG(hw, E1000_TIPG);
++ reg_data = er32(TIPG);
+ reg_data &= ~E1000_TIPG_IPGT_MASK;
+ reg_data |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
-+ E1000_WRITE_REG(hw, E1000_TIPG, reg_data);
++ ew32(TIPG, reg_data);
+
+ reg_data = E1000_READ_REG_ARRAY(hw, E1000_FFLT, 0x0001);
+ reg_data &= ~0x00100000;
+{
+ u32 reg;
+
-+ DEBUGFUNC("e1000_initialize_hw_bits_80003es2lan");
-+
-+ if (hw->mac.disable_hw_init_bits)
-+ goto out;
-+
+ /* Transmit Descriptor Control 0 */
-+ reg = E1000_READ_REG(hw, E1000_TXDCTL(0));
++ reg = er32(TXDCTL(0));
+ reg |= (1 << 22);
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(0), reg);
++ ew32(TXDCTL(0), reg);
+
+ /* Transmit Descriptor Control 1 */
-+ reg = E1000_READ_REG(hw, E1000_TXDCTL(1));
++ reg = er32(TXDCTL(1));
+ reg |= (1 << 22);
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(1), reg);
++ ew32(TXDCTL(1), reg);
+
+ /* Transmit Arbitration Control 0 */
-+ reg = E1000_READ_REG(hw, E1000_TARC(0));
++ reg = er32(TARC(0));
+ reg &= ~(0xF << 27); /* 30:27 */
+ if (hw->phy.media_type != e1000_media_type_copper)
+ reg &= ~(1 << 20);
-+ E1000_WRITE_REG(hw, E1000_TARC(0), reg);
++ ew32(TARC(0), reg);
+
+ /* Transmit Arbitration Control 1 */
-+ reg = E1000_READ_REG(hw, E1000_TARC(1));
-+ if (E1000_READ_REG(hw, E1000_TCTL) & E1000_TCTL_MULR)
++ reg = er32(TARC(1));
++ if (er32(TCTL) & E1000_TCTL_MULR)
+ reg &= ~(1 << 28);
+ else
+ reg |= (1 << 28);
-+ E1000_WRITE_REG(hw, E1000_TARC(1), reg);
++ ew32(TARC(1), reg);
+
-+out:
+ return;
+}
+
+ u32 ctrl_ext;
+ u16 data;
+
-+ DEBUGFUNC("e1000_copper_link_setup_gg82563_80003es2lan");
-+
+ if (!phy->reset_disable) {
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
++ ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL,
+ &data);
+ if (ret_val)
+ goto out;
+ /* Use 25MHz for both link down and 1000Base-T for Tx clock. */
+ data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
+
-+ ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
++ ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL,
+ data);
+ if (ret_val)
+ goto out;
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_SPEC_CTRL, &data);
++ ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ if (phy->disable_polarity_correction)
+ data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+
-+ ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_SPEC_CTRL, data);
++ ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, data);
+ if (ret_val)
+ goto out;
+
+ /* SW Reset the PHY so all changes take effect */
-+ ret_val = hw->phy.ops.commit(hw);
++ ret_val = e1000e_commit_phy(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error Resetting the PHY\n");
++ e_dbg("Error Resetting the PHY\n");
+ goto out;
+ }
+
+
+ /* Bypass Rx and Tx FIFO's */
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
-+ E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
-+ E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
-+ E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
++ E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
++ E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
++ E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
+ if (ret_val)
+ goto out;
+
+ if (ret_val)
+ goto out;
+
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_SPEC_CTRL_2, &data);
++ ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
-+ ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_SPEC_CTRL_2, data);
++ ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL_2, data);
+ if (ret_val)
+ goto out;
+
-+ ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
++ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
-+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
++ ew32(CTRL_EXT, ctrl_ext);
+
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);
++ ret_val = e1e_rphy(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ if (!(hw->mac.ops.check_mng_mode(hw))) {
+ /* Enable Electrical Idle on the PHY */
+ data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
-+ ret_val = hw->phy.ops.write_reg(hw,
-+ GG82563_PHY_PWR_MGMT_CTRL,
++ ret_val = e1e_wphy(hw, GG82563_PHY_PWR_MGMT_CTRL,
+ data);
+ if (ret_val)
+ goto out;
-+ ret_val = hw->phy.ops.read_reg(hw,
-+ GG82563_PHY_KMRN_MODE_CTRL,
-+ &data);
-+ if (ret_val)
-+ goto out;
++
++ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
++ &data);
++ if (ret_val)
++ goto out;
+
+ data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
-+ ret_val = hw->phy.ops.write_reg(hw,
-+ GG82563_PHY_KMRN_MODE_CTRL,
++ ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ data);
-+
+ if (ret_val)
+ goto out;
+ }
+ * Workaround: Disable padding in Kumeran interface in the MAC
+ * and in the PHY to avoid CRC errors.
+ */
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_INBAND_CTRL, &data);
++ ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data |= GG82563_ICR_DIS_PADDING;
-+ ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_INBAND_CTRL, data);
++ ret_val = e1e_wphy(hw, GG82563_PHY_INBAND_CTRL, data);
+ if (ret_val)
+ goto out;
+
+static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
+{
+ u32 ctrl;
-+ s32 ret_val;
++ s32 ret_val;
+ u16 reg_data;
+
-+ DEBUGFUNC("e1000_setup_copper_link_80003es2lan");
-+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+
+ /*
+ * Set the mac to wait the maximum time between each
+ if (ret_val)
+ goto out;
+
-+ ret_val = e1000_setup_copper_link_generic(hw);
++ ret_val = e1000e_setup_copper_link(hw);
+
+out:
+ return ret_val;
+ u16 speed;
+ u16 duplex;
+
-+ DEBUGFUNC("e1000_configure_on_link_up");
-+
+ if (hw->phy.media_type == e1000_media_type_copper) {
-+
-+ ret_val = e1000_get_speed_and_duplex_copper_generic(hw,
++ ret_val = e1000e_get_speed_and_duplex_copper(hw,
+ &speed,
+ &duplex);
+ if (ret_val)
+ u32 i = 0;
+ u16 reg_data, reg_data2;
+
-+ DEBUGFUNC("e1000_configure_kmrn_for_10_100");
-+
+ reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ goto out;
+
+ /* Configure Transmit Inter-Packet Gap */
-+ tipg = E1000_READ_REG(hw, E1000_TIPG);
++ tipg = er32(TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN;
-+ E1000_WRITE_REG(hw, E1000_TIPG, tipg);
++ ew32(TIPG, tipg);
+
+
+ do {
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
++ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ ®_data);
+ if (ret_val)
+ goto out;
+
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
++ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ ®_data2);
+ if (ret_val)
+ goto out;
+ else
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+
-+ ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
++ ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
+out:
+ return ret_val;
+ u32 tipg;
+ u32 i = 0;
+
-+ DEBUGFUNC("e1000_configure_kmrn_for_1000");
-+
+ reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ goto out;
+
+ /* Configure Transmit Inter-Packet Gap */
-+ tipg = E1000_READ_REG(hw, E1000_TIPG);
++ tipg = er32(TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
-+ E1000_WRITE_REG(hw, E1000_TIPG, tipg);
++ ew32(TIPG, tipg);
+
+
+ do {
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
++ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ ®_data);
+ if (ret_val)
+ goto out;
+
-+ ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
++ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ ®_data2);
+ if (ret_val)
+ goto out;
+ } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
+
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
-+ ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
++ ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
+out:
+ return ret_val;
+ * using the kumeran interface. The information retrieved is stored in data.
+ * Release the semaphore before exiting.
+ **/
-+s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 *data)
++static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
++ u16 *data)
+{
+ u32 kmrnctrlsta;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_read_kmrn_reg_80003es2lan");
-+
+ ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
+ if (ret_val)
+ goto out;
+
+ kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+ E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
-+ E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta);
++ ew32(KMRNCTRLSTA, kmrnctrlsta);
+
-+ usec_delay(2);
++ udelay(2);
+
-+ kmrnctrlsta = E1000_READ_REG(hw, E1000_KMRNCTRLSTA);
++ kmrnctrlsta = er32(KMRNCTRLSTA);
+ *data = (u16)kmrnctrlsta;
+
+ e1000_release_mac_csr_80003es2lan(hw);
+ * at the offset using the kumeran interface. Release semaphore
+ * before exiting.
+ **/
-+s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 data)
++static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
++ u16 data)
+{
+ u32 kmrnctrlsta;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_write_kmrn_reg_80003es2lan");
-+
+ ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
+ if (ret_val)
+ goto out;
+
+ kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+ E1000_KMRNCTRLSTA_OFFSET) | data;
-+ E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta);
++ ew32(KMRNCTRLSTA, kmrnctrlsta);
+
-+ usec_delay(2);
++ udelay(2);
+
+ e1000_release_mac_csr_80003es2lan(hw);
+
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_read_mac_addr_80003es2lan");
-+ if (e1000_check_alt_mac_addr_generic(hw))
-+ ret_val = e1000_read_mac_addr_generic(hw);
++ /*
++ * If there's an alternate MAC address place it in RAR0
++ * so that it will override the Si installed default perm
++ * address.
++ */
++ ret_val = e1000_check_alt_mac_addr_generic(hw);
++ if (ret_val)
++ goto out;
++
++ ret_val = e1000e_read_mac_addr_generic(hw);
+
++out:
+ return ret_val;
+}
+
+{
+ /* If the management interface is not enabled, then power down */
+ if (!(hw->mac.ops.check_mng_mode(hw) ||
-+ hw->phy.ops.check_reset_block(hw)))
++ e1000_check_reset_block(hw)))
+ e1000_power_down_phy_copper(hw);
+
+ return;
+ **/
+static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
+{
-+ volatile u32 temp;
-+
-+ DEBUGFUNC("e1000_clear_hw_cntrs_80003es2lan");
-+
-+ e1000_clear_hw_cntrs_base_generic(hw);
-+
-+ temp = E1000_READ_REG(hw, E1000_PRC64);
-+ temp = E1000_READ_REG(hw, E1000_PRC127);
-+ temp = E1000_READ_REG(hw, E1000_PRC255);
-+ temp = E1000_READ_REG(hw, E1000_PRC511);
-+ temp = E1000_READ_REG(hw, E1000_PRC1023);
-+ temp = E1000_READ_REG(hw, E1000_PRC1522);
-+ temp = E1000_READ_REG(hw, E1000_PTC64);
-+ temp = E1000_READ_REG(hw, E1000_PTC127);
-+ temp = E1000_READ_REG(hw, E1000_PTC255);
-+ temp = E1000_READ_REG(hw, E1000_PTC511);
-+ temp = E1000_READ_REG(hw, E1000_PTC1023);
-+ temp = E1000_READ_REG(hw, E1000_PTC1522);
-+
-+ temp = E1000_READ_REG(hw, E1000_ALGNERRC);
-+ temp = E1000_READ_REG(hw, E1000_RXERRC);
-+ temp = E1000_READ_REG(hw, E1000_TNCRS);
-+ temp = E1000_READ_REG(hw, E1000_CEXTERR);
-+ temp = E1000_READ_REG(hw, E1000_TSCTC);
-+ temp = E1000_READ_REG(hw, E1000_TSCTFC);
-+
-+ temp = E1000_READ_REG(hw, E1000_MGTPRC);
-+ temp = E1000_READ_REG(hw, E1000_MGTPDC);
-+ temp = E1000_READ_REG(hw, E1000_MGTPTC);
-+
-+ temp = E1000_READ_REG(hw, E1000_IAC);
-+ temp = E1000_READ_REG(hw, E1000_ICRXOC);
-+
-+ temp = E1000_READ_REG(hw, E1000_ICRXPTC);
-+ temp = E1000_READ_REG(hw, E1000_ICRXATC);
-+ temp = E1000_READ_REG(hw, E1000_ICTXPTC);
-+ temp = E1000_READ_REG(hw, E1000_ICTXATC);
-+ temp = E1000_READ_REG(hw, E1000_ICTXQEC);
-+ temp = E1000_READ_REG(hw, E1000_ICTXQMTC);
-+ temp = E1000_READ_REG(hw, E1000_ICRXDMTC);
++ e1000e_clear_hw_cntrs_base(hw);
++
++ er32(PRC64);
++ er32(PRC127);
++ er32(PRC255);
++ er32(PRC511);
++ er32(PRC1023);
++ er32(PRC1522);
++ er32(PTC64);
++ er32(PTC127);
++ er32(PTC255);
++ er32(PTC511);
++ er32(PTC1023);
++ er32(PTC1522);
++
++ er32(ALGNERRC);
++ er32(RXERRC);
++ er32(TNCRS);
++ er32(CEXTERR);
++ er32(TSCTC);
++ er32(TSCTFC);
++
++ er32(MGTPRC);
++ er32(MGTPDC);
++ er32(MGTPTC);
++
++ er32(IAC);
++ er32(ICRXOC);
++
++ er32(ICRXPTC);
++ er32(ICRXATC);
++ er32(ICTXPTC);
++ er32(ICTXATC);
++ er32(ICTXQEC);
++ er32(ICTXQMTC);
++ er32(ICRXDMTC);
+}
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_80003es2lan.h linux-2.6.22-10/drivers/net/e1000e/e1000_80003es2lan.h
--- linux-2.6.22-0/drivers/net/e1000e/e1000_80003es2lan.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_80003es2lan.h 2008-10-14 01:51:32.000000000 +0200
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_80003es2lan.h 2009-06-24 00:32:20.000000000 +0200
@@ -0,0 +1,95 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+#endif
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_82571.c linux-2.6.22-10/drivers/net/e1000e/e1000_82571.c
--- linux-2.6.22-0/drivers/net/e1000e/e1000_82571.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_82571.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,1538 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_82571.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,1767 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+
+*******************************************************************************/
+
-+/* e1000_82571
-+ * e1000_82572
-+ * e1000_82573
-+ * e1000_82574
++/*
++ * 82571EB Gigabit Ethernet Controller
++ * 82571EB Gigabit Ethernet Controller (Copper)
++ * 82571EB Gigabit Ethernet Controller (Fiber)
++ * 82571EB Dual Port Gigabit Mezzanine Adapter
++ * 82571EB Quad Port Gigabit Mezzanine Adapter
++ * 82571PT Gigabit PT Quad Port Server ExpressModule
++ * 82572EI Gigabit Ethernet Controller (Copper)
++ * 82572EI Gigabit Ethernet Controller (Fiber)
++ * 82572EI Gigabit Ethernet Controller
++ * 82573V Gigabit Ethernet Controller (Copper)
++ * 82573E Gigabit Ethernet Controller (Copper)
++ * 82573L Gigabit Ethernet Controller
++ * 82574L Gigabit Network Connection
++ * 82574L Gigabit Network Connection
++ * 82583V Gigabit Network Connection
+ */
+
-+#include "e1000_hw.h"
++#include "e1000.h"
+
+static s32 e1000_init_phy_params_82571(struct e1000_hw *hw);
+static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw);
+static void e1000_clear_vfta_82571(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
+static s32 e1000_led_on_82574(struct e1000_hw *hw);
-+static void e1000_update_mc_addr_list_82571(struct e1000_hw *hw,
-+ u8 *mc_addr_list, u32 mc_addr_count,
-+ u32 rar_used_count, u32 rar_count);
+static s32 e1000_setup_link_82571(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
++static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data);
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
+
-+struct e1000_dev_spec_82571 {
-+ bool laa_is_present;
-+};
-+
+/**
+ * e1000_init_phy_params_82571 - Init PHY func ptrs.
+ * @hw: pointer to the HW structure
-+ *
-+ * This is a function pointer entry point called by the api module.
+ **/
+static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_init_phy_params_82571");
-+
+ if (hw->phy.media_type != e1000_media_type_copper) {
-+ phy->type = e1000_phy_none;
++ phy->type = e1000_phy_none;
+ goto out;
+ }
+
+
+ phy->ops.acquire = e1000_get_hw_semaphore_82571;
+ phy->ops.check_polarity = e1000_check_polarity_igp;
-+ phy->ops.check_reset_block = e1000_check_reset_block_generic;
++ phy->ops.check_reset_block = e1000e_check_reset_block_generic;
+ phy->ops.release = e1000_put_hw_semaphore_82571;
-+ phy->ops.reset = e1000_phy_hw_reset_generic;
++ phy->ops.reset = e1000e_phy_hw_reset_generic;
+ phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82571;
-+ phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic;
++ phy->ops.set_d3_lplu_state = e1000e_set_d3_lplu_state;
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_82571;
+
+ case e1000_82572:
+ phy->type = e1000_phy_igp_2;
+ phy->ops.get_cfg_done = e1000_get_cfg_done_82571;
-+ phy->ops.get_info = e1000_get_phy_info_igp;
-+ phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp;
-+ phy->ops.get_cable_length = e1000_get_cable_length_igp_2;
-+ phy->ops.read_reg = e1000_read_phy_reg_igp;
-+ phy->ops.write_reg = e1000_write_phy_reg_igp;
++ phy->ops.get_info = e1000e_get_phy_info_igp;
++ phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
++ phy->ops.get_cable_length = e1000e_get_cable_length_igp_2;
++ phy->ops.read_reg = e1000e_read_phy_reg_igp;
++ phy->ops.write_reg = e1000e_write_phy_reg_igp;
+
+ /* This uses above function pointers */
+ ret_val = e1000_get_phy_id_82571(hw);
+ break;
+ case e1000_82573:
+ phy->type = e1000_phy_m88;
-+ phy->ops.get_cfg_done = e1000_get_cfg_done_generic;
-+ phy->ops.get_info = e1000_get_phy_info_m88;
-+ phy->ops.commit = e1000_phy_sw_reset_generic;
-+ phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
-+ phy->ops.get_cable_length = e1000_get_cable_length_m88;
-+ phy->ops.read_reg = e1000_read_phy_reg_m88;
-+ phy->ops.write_reg = e1000_write_phy_reg_m88;
++ phy->ops.get_cfg_done = e1000e_get_cfg_done;
++ phy->ops.get_info = e1000e_get_phy_info_m88;
++ phy->ops.commit = e1000e_phy_sw_reset;
++ phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
++ phy->ops.get_cable_length = e1000e_get_cable_length_m88;
++ phy->ops.read_reg = e1000e_read_phy_reg_m88;
++ phy->ops.write_reg = e1000e_write_phy_reg_m88;
+
+ /* This uses above function pointers */
+ ret_val = e1000_get_phy_id_82571(hw);
+ /* Verify PHY ID */
+ if (phy->id != M88E1111_I_PHY_ID) {
+ ret_val = -E1000_ERR_PHY;
-+ DEBUGOUT1("PHY ID unknown: type = 0x%08x\n", phy->id);
++ e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);
+ goto out;
+ }
+ break;
++ case e1000_82583:
+ case e1000_82574:
+ phy->type = e1000_phy_bm;
-+ phy->ops.get_cfg_done = e1000_get_cfg_done_generic;
-+ phy->ops.get_info = e1000_get_phy_info_m88;
-+ phy->ops.commit = e1000_phy_sw_reset_generic;
-+ phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
-+ phy->ops.get_cable_length = e1000_get_cable_length_m88;
-+ phy->ops.read_reg = e1000_read_phy_reg_bm2;
-+ phy->ops.write_reg = e1000_write_phy_reg_bm2;
++ phy->ops.get_cfg_done = e1000e_get_cfg_done;
++ phy->ops.get_info = e1000e_get_phy_info_m88;
++ phy->ops.commit = e1000e_phy_sw_reset;
++ phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
++ phy->ops.get_cable_length = e1000e_get_cable_length_m88;
++ phy->ops.read_reg = e1000e_read_phy_reg_bm2;
++ phy->ops.write_reg = e1000e_write_phy_reg_bm2;
+
+ /* This uses above function pointers */
+ ret_val = e1000_get_phy_id_82571(hw);
+ /* Verify PHY ID */
-+ if (phy->id != BME1000_E_PHY_ID_R2) {
++ if (phy->id != BME1000_E_PHY_ID_R2) {
+ ret_val = -E1000_ERR_PHY;
-+ DEBUGOUT1("PHY ID unknown: type = 0x%08x\n", phy->id);
++ e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);
+ goto out;
+ }
+ break;
+/**
+ * e1000_init_nvm_params_82571 - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
-+ *
-+ * This is a function pointer entry point called by the api module.
+ **/
+static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ u32 eecd = E1000_READ_REG(hw, E1000_EECD);
++ u32 eecd = er32(EECD);
+ u16 size;
+
-+ DEBUGFUNC("e1000_init_nvm_params_82571");
-+
-+ nvm->opcode_bits = 8;
-+ nvm->delay_usec = 1;
++ nvm->opcode_bits = 8;
++ nvm->delay_usec = 1;
+ switch (nvm->override) {
+ case e1000_nvm_override_spi_large:
-+ nvm->page_size = 32;
++ nvm->page_size = 32;
+ nvm->address_bits = 16;
+ break;
+ case e1000_nvm_override_spi_small:
-+ nvm->page_size = 8;
++ nvm->page_size = 8;
+ nvm->address_bits = 8;
+ break;
+ default:
-+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
++ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+ break;
+ }
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
++ case e1000_82583:
+ if (((eecd >> 15) & 0x3) == 0x3) {
+ nvm->type = e1000_nvm_flash_hw;
+ nvm->word_size = 2048;
+ * to Flash update issue.
+ */
+ eecd &= ~E1000_EECD_AUPDEN;
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
++ ew32(EECD, eecd);
+ break;
+ }
+ /* Fall Through */
+ default:
-+ nvm->type = e1000_nvm_eeprom_spi;
++ nvm->type = e1000_nvm_eeprom_spi;
+ size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+ /*
+
+ /* Function Pointers */
+ nvm->ops.acquire = e1000_acquire_nvm_82571;
-+ nvm->ops.read = e1000_read_nvm_eerd;
++ nvm->ops.read = e1000e_read_nvm_eerd;
+ nvm->ops.release = e1000_release_nvm_82571;
+ nvm->ops.update = e1000_update_nvm_checksum_82571;
+ nvm->ops.validate = e1000_validate_nvm_checksum_82571;
+/**
+ * e1000_init_mac_params_82571 - Init MAC func ptrs.
+ * @hw: pointer to the HW structure
-+ *
-+ * This is a function pointer entry point called by the api module.
+ **/
+static s32 e1000_init_mac_params_82571(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = E1000_SUCCESS;
-+
-+ DEBUGFUNC("e1000_init_mac_params_82571");
++ u32 swsm = 0;
++ u32 swsm2 = 0;
++ bool force_clear_smbi = false;
+
+ /* Set media type */
+ switch (hw->device_id) {
+ mac->asf_firmware_present = true;
+ /* Set if manageability features are enabled. */
+ mac->arc_subsystem_valid =
-+ (E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK)
++ (er32(FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+
+ /* Function pointers */
+
+ /* bus type/speed/width */
-+ mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic;
++ mac->ops.get_bus_info = e1000e_get_bus_info_pcie;
++ /* function id */
++ switch (hw->mac.type) {
++ case e1000_82573:
++ case e1000_82574:
++ case e1000_82583:
++ mac->ops.set_lan_id = e1000_set_lan_id_single_port;
++ break;
++ default:
++ break;
++ }
+ /* reset */
+ mac->ops.reset_hw = e1000_reset_hw_82571;
+ /* hw initialization */
+ /* check for link */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
-+ mac->ops.check_for_link = e1000_check_for_copper_link_generic;
++ mac->ops.check_for_link = e1000e_check_for_copper_link;
+ break;
+ case e1000_media_type_fiber:
-+ mac->ops.check_for_link = e1000_check_for_fiber_link_generic;
++ mac->ops.check_for_link = e1000e_check_for_fiber_link;
+ break;
+ case e1000_media_type_internal_serdes:
-+ mac->ops.check_for_link = e1000_check_for_serdes_link_generic;
++ mac->ops.check_for_link = e1000_check_for_serdes_link_82571;
+ break;
+ default:
+ ret_val = -E1000_ERR_CONFIG;
+ /* check management mode */
+ switch (hw->mac.type) {
+ case e1000_82574:
++ case e1000_82583:
+ mac->ops.check_mng_mode = e1000_check_mng_mode_82574;
+ break;
+ default:
+ break;
+ }
+ /* multicast address update */
-+ mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_82571;
++ mac->ops.update_mc_addr_list = e1000e_update_mc_addr_list_generic;
+ /* writing VFTA */
-+ mac->ops.write_vfta = e1000_write_vfta_generic;
++ mac->ops.write_vfta = e1000e_write_vfta_generic;
+ /* clearing VFTA */
+ mac->ops.clear_vfta = e1000_clear_vfta_82571;
+ /* setting MTA */
+ mac->ops.mta_set = e1000_mta_set_generic;
+ /* read mac address */
+ mac->ops.read_mac_addr = e1000_read_mac_addr_82571;
++ /* ID LED init */
++ mac->ops.id_led_init = e1000e_id_led_init;
+ /* blink LED */
-+ mac->ops.blink_led = e1000_blink_led_generic;
++ mac->ops.blink_led = e1000e_blink_led;
+ /* setup LED */
+ mac->ops.setup_led = e1000_setup_led_generic;
+ /* cleanup LED */
-+ mac->ops.cleanup_led = e1000_cleanup_led_generic;
++ mac->ops.cleanup_led = e1000e_cleanup_led_generic;
+ /* turn on/off LED */
+ switch (hw->mac.type) {
+ case e1000_82574:
++ case e1000_82583:
+ mac->ops.led_on = e1000_led_on_82574;
+ break;
+ default:
-+ mac->ops.led_on = e1000_led_on_generic;
++ mac->ops.led_on = e1000e_led_on_generic;
+ break;
+ }
-+ mac->ops.led_off = e1000_led_off_generic;
-+ /* remove device */
-+ mac->ops.remove_device = e1000_remove_device_generic;
++ mac->ops.led_off = e1000e_led_off_generic;
+ /* clear hardware counters */
+ mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82571;
+ /* link info */
+ mac->ops.get_link_up_info =
+ (hw->phy.media_type == e1000_media_type_copper)
-+ ? e1000_get_speed_and_duplex_copper_generic
-+ : e1000_get_speed_and_duplex_fiber_serdes_generic;
++ ? e1000e_get_speed_and_duplex_copper
++ : e1000e_get_speed_and_duplex_fiber_serdes;
++
++ /*
++ * Ensure that the inter-port SWSM.SMBI lock bit is clear before
++ * first NVM or PHY acess. This should be done for single-port
++ * devices, and for one port only on dual-port devices so that
++ * for those devices we can still use the SMBI lock to synchronize
++ * inter-port accesses to the PHY & NVM.
++ */
++ switch (hw->mac.type) {
++ case e1000_82571:
++ case e1000_82572:
++ swsm2 = er32(SWSM2);
++
++ if (!(swsm2 & E1000_SWSM2_LOCK)) {
++ /* Only do this for the first interface on this card */
++ ew32(SWSM2,
++ swsm2 | E1000_SWSM2_LOCK);
++ force_clear_smbi = true;
++ } else
++ force_clear_smbi = false;
++ break;
++ default:
++ force_clear_smbi = true;
++ break;
++ }
+
-+ hw->dev_spec_size = sizeof(struct e1000_dev_spec_82571);
++ if (force_clear_smbi) {
++ /* Make sure SWSM.SMBI is clear */
++ swsm = er32(SWSM);
++ if (swsm & E1000_SWSM_SMBI) {
++ /* This bit should not be set on a first interface, and
++ * indicates that the bootagent or EFI code has
++ * improperly left this bit enabled
++ */
++ e_dbg("Please update your 82571 Bootagent\n");
++ }
++ ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
++ }
+
-+ /* Device-specific structure allocation */
-+ ret_val = e1000_alloc_zeroed_dev_spec_struct(hw, hw->dev_spec_size);
++ /*
++ * Initialze device specific counter of SMBI acquisition
++ * timeouts.
++ */
++ hw->dev_spec._82571.smb_counter = 0;
+
+out:
+ return ret_val;
+ * e1000_init_function_pointers_82571 - Init func ptrs.
+ * @hw: pointer to the HW structure
+ *
-+ * The only function explicitly called by the api module to initialize
-+ * all function pointers and parameters.
++ * Called to initialize all function pointers and parameters.
+ **/
+void e1000_init_function_pointers_82571(struct e1000_hw *hw)
+{
-+ DEBUGFUNC("e1000_init_function_pointers_82571");
-+
+ e1000_init_mac_ops_generic(hw);
+ e1000_init_nvm_ops_generic(hw);
+ hw->mac.ops.init_params = e1000_init_mac_params_82571;
+ s32 ret_val = E1000_SUCCESS;
+ u16 phy_id = 0;
+
-+ DEBUGFUNC("e1000_get_phy_id_82571");
-+
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ phy->id = IGP01E1000_I_PHY_ID;
+ break;
+ case e1000_82573:
-+ ret_val = e1000_get_phy_id(hw);
++ ret_val = e1000e_get_phy_id(hw);
+ break;
+ case e1000_82574:
-+ ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
++ case e1000_82583:
++ ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id = (u32)(phy_id << 16);
-+ usec_delay(20);
-+ ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
++ udelay(20);
++ ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
+ if (ret_val)
+ goto out;
+
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
-+static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
++s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 ret_val = E1000_SUCCESS;
-+ s32 timeout = hw->nvm.word_size + 1;
++ s32 sw_timeout = hw->nvm.word_size + 1;
++ s32 fw_timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
-+ DEBUGFUNC("e1000_get_hw_semaphore_82571");
++ /*
++ * If we have timedout 3 times on trying to acquire
++ * the inter-port SMBI semaphore, there is old code
++ * operating on the other port, and it is not
++ * releasing SMBI. Modify the number of times that
++ * we try for the semaphore to interwork with this
++ * older code.
++ */
++ if (hw->dev_spec._82571.smb_counter > 2)
++ sw_timeout = 1;
++
++ /* Get the SW semaphore */
++ while (i < sw_timeout) {
++ swsm = er32(SWSM);
++ if (!(swsm & E1000_SWSM_SMBI))
++ break;
++
++ udelay(50);
++ i++;
++ }
+
++ if (i == sw_timeout) {
++ e_dbg("Driver can't access device - SMBI bit is set.\n");
++ hw->dev_spec._82571.smb_counter++;
++ }
+ /* Get the FW semaphore. */
-+ for (i = 0; i < timeout; i++) {
-+ swsm = E1000_READ_REG(hw, E1000_SWSM);
-+ E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
++ for (i = 0; i < fw_timeout; i++) {
++ swsm = er32(SWSM);
++ ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
-+ if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
++ if (er32(SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
-+ usec_delay(50);
++ udelay(50);
+ }
+
-+ if (i == timeout) {
++ if (i == fw_timeout) {
+ /* Release semaphores */
-+ e1000_put_hw_semaphore_generic(hw);
-+ DEBUGOUT("Driver can't access the NVM\n");
++ e1000_put_hw_semaphore_82571(hw);
++ e_dbg("Driver can't access the NVM\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
-+static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
++void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
+{
+ u32 swsm;
+
-+ DEBUGFUNC("e1000_put_hw_semaphore_82571");
-+
-+ swsm = E1000_READ_REG(hw, E1000_SWSM);
-+
-+ swsm &= ~E1000_SWSM_SWESMBI;
-+
-+ E1000_WRITE_REG(hw, E1000_SWSM, swsm);
++ swsm = er32(SWSM);
++ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
++ ew32(SWSM, swsm);
+}
-+
+/**
+ * e1000_acquire_nvm_82571 - Request for access to the EEPROM
+ * @hw: pointer to the HW structure
+{
+ s32 ret_val;
+
-+ DEBUGFUNC("e1000_acquire_nvm_82571");
-+
+ ret_val = e1000_get_hw_semaphore_82571(hw);
+ if (ret_val)
+ goto out;
+
-+ if (hw->mac.type != e1000_82573 && hw->mac.type != e1000_82574)
-+ ret_val = e1000_acquire_nvm_generic(hw);
++ switch (hw->mac.type) {
++ case e1000_82574:
++ case e1000_82583:
++ case e1000_82573:
++ break;
++ default:
++ ret_val = e1000e_acquire_nvm(hw);
++ break;
++ }
+
+ if (ret_val)
+ e1000_put_hw_semaphore_82571(hw);
+ **/
+static void e1000_release_nvm_82571(struct e1000_hw *hw)
+{
-+ DEBUGFUNC("e1000_release_nvm_82571");
-+
-+ e1000_release_nvm_generic(hw);
++ e1000e_release_nvm(hw);
+ e1000_put_hw_semaphore_82571(hw);
+}
+
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_write_nvm_82571");
-+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
++ case e1000_82583:
+ ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data);
+ break;
+ case e1000_82571:
+ case e1000_82572:
-+ ret_val = e1000_write_nvm_spi(hw, offset, words, data);
++ ret_val = e1000e_write_nvm_spi(hw, offset, words, data);
+ break;
+ default:
+ ret_val = -E1000_ERR_NVM;
+ s32 ret_val;
+ u16 i;
+
-+ DEBUGFUNC("e1000_update_nvm_checksum_82571");
-+
-+ ret_val = e1000_update_nvm_checksum_generic(hw);
++ ret_val = e1000e_update_nvm_checksum_generic(hw);
+ if (ret_val)
+ goto out;
+
+
+ /* Check for pending operations. */
+ for (i = 0; i < E1000_FLASH_UPDATES; i++) {
-+ msec_delay(1);
-+ if ((E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_FLUPD) == 0)
++ msleep(1);
++ if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+ break;
+ }
+
+ }
+
+ /* Reset the firmware if using STM opcode. */
-+ if ((E1000_READ_REG(hw, E1000_FLOP) & 0xFF00) == E1000_STM_OPCODE) {
++ if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) {
+ /*
+ * The enabling of and the actual reset must be done
+ * in two write cycles.
+ */
-+ E1000_WRITE_REG(hw, E1000_HICR, E1000_HICR_FW_RESET_ENABLE);
-+ E1000_WRITE_FLUSH(hw);
-+ E1000_WRITE_REG(hw, E1000_HICR, E1000_HICR_FW_RESET);
++ ew32(HICR, E1000_HICR_FW_RESET_ENABLE);
++ e1e_flush();
++ ew32(HICR, E1000_HICR_FW_RESET);
+ }
+
+ /* Commit the write to flash */
-+ eecd = E1000_READ_REG(hw, E1000_EECD) | E1000_EECD_FLUPD;
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
++ eecd = er32(EECD) | E1000_EECD_FLUPD;
++ ew32(EECD, eecd);
+
+ for (i = 0; i < E1000_FLASH_UPDATES; i++) {
-+ msec_delay(1);
-+ if ((E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_FLUPD) == 0)
++ msleep(1);
++ if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+ break;
+ }
+
+ **/
+static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
+{
-+ DEBUGFUNC("e1000_validate_nvm_checksum_82571");
-+
+ if (hw->nvm.type == e1000_nvm_flash_hw)
+ e1000_fix_nvm_checksum_82571(hw);
+
-+ return e1000_validate_nvm_checksum_generic(hw);
++ return e1000e_validate_nvm_checksum_generic(hw);
+}
+
+/**
+ u32 i, eewr = 0;
+ s32 ret_val = 0;
+
-+ DEBUGFUNC("e1000_write_nvm_eewr_82571");
-+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
-+ DEBUGOUT("nvm parameter(s) out of bounds\n");
++ e_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+ ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
+ E1000_NVM_RW_REG_START;
+
-+ ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
++ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+ if (ret_val)
+ break;
+
-+ E1000_WRITE_REG(hw, E1000_EEWR, eewr);
++ ew32(EEWR, eewr);
+
-+ ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
++ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+ if (ret_val)
+ break;
+ }
+ s32 timeout = PHY_CFG_TIMEOUT;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_get_cfg_done_82571");
-+
+ while (timeout) {
-+ if (E1000_READ_REG(hw, E1000_EEMNGCTL) & E1000_NVM_CFG_DONE_PORT_0)
++ if (er32(EEMNGCTL) & E1000_NVM_CFG_DONE_PORT_0)
+ break;
-+ msec_delay(1);
++ msleep(1);
+ timeout--;
+ }
+ if (!timeout) {
-+ DEBUGOUT("MNG configuration cycle has not completed.\n");
++ e_dbg("MNG configuration cycle has not completed.\n");
+ ret_val = -E1000_ERR_RESET;
+ goto out;
+ }
+ s32 ret_val = E1000_SUCCESS;
+ u16 data;
+
-+ DEBUGFUNC("e1000_set_d0_lplu_state_82571");
-+
+ if (!(phy->ops.read_reg))
+ goto out;
+
-+ ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
++ ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ goto out;
+
+ if (active) {
+ data |= IGP02E1000_PM_D0_LPLU;
-+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
++ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
-+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
++ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
++ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else {
+ data &= ~IGP02E1000_PM_D0_LPLU;
-+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
++ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
-+ ret_val = phy->ops.read_reg(hw,
++ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
++ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
-+ ret_val = phy->ops.read_reg(hw,
++ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
++ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ * e1000_reset_hw_82571 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
-+ * This resets the hardware into a known state. This is a
-+ * function pointer entry point called by the api module.
++ * This resets the hardware into a known state.
+ **/
+static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i = 0;
+
-+ DEBUGFUNC("e1000_reset_hw_82571");
-+
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
-+ ret_val = e1000_disable_pcie_master_generic(hw);
-+ if (ret_val) {
-+ DEBUGOUT("PCI-E Master disable polling has failed.\n");
-+ }
++ ret_val = e1000e_disable_pcie_master(hw);
++ if (ret_val)
++ e_dbg("PCI-E Master disable polling has failed.\n");
+
-+ DEBUGOUT("Masking off all interrupts\n");
-+ E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
++ e_dbg("Masking off all interrupts\n");
++ ew32(IMC, 0xffffffff);
+
-+ E1000_WRITE_REG(hw, E1000_RCTL, 0);
-+ E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
-+ E1000_WRITE_FLUSH(hw);
++ ew32(RCTL, 0);
++ ew32(TCTL, E1000_TCTL_PSP);
++ e1e_flush();
+
-+ msec_delay(10);
++ msleep(10);
+
+ /*
+ * Must acquire the MDIO ownership before MAC reset.
+ * Ownership defaults to firmware after a reset.
+ */
-+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
-+ extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
++ switch (hw->mac.type) {
++ case e1000_82574:
++ case e1000_82583:
++ case e1000_82573:
++ extcnf_ctrl = er32(EXTCNF_CTRL);
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+ do {
-+ E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl);
-+ extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
++ ew32(EXTCNF_CTRL, extcnf_ctrl);
++ extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+ break;
+
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
-+ msec_delay(2);
++ msleep(2);
+ i++;
+ } while (i < MDIO_OWNERSHIP_TIMEOUT);
++ break;
++ default:
++ break;
+ }
+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+
-+ DEBUGOUT("Issuing a global reset to MAC\n");
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
++ e_dbg("Issuing a global reset to MAC\n");
++ ew32(CTRL, ctrl | E1000_CTRL_RST);
+
+ if (hw->nvm.type == e1000_nvm_flash_hw) {
-+ usec_delay(10);
-+ ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
++ udelay(10);
++ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
-+ E1000_WRITE_FLUSH(hw);
++ ew32(CTRL_EXT, ctrl_ext);
++ e1e_flush();
+ }
+
-+ ret_val = e1000_get_auto_rd_done_generic(hw);
++ ret_val = e1000e_get_auto_rd_done(hw);
+ if (ret_val)
+ /* We don't want to continue accessing MAC registers. */
+ goto out;
+ * Need to wait for Phy configuration completion before accessing
+ * NVM and Phy.
+ */
-+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574)
-+ msec_delay(25);
++
++ switch (hw->mac.type) {
++ case e1000_82574:
++ case e1000_82583:
++ case e1000_82573:
++ msleep(25);
++ break;
++ default:
++ break;
++ }
+
+ /* Clear any pending interrupt events. */
-+ E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
-+ icr = E1000_READ_REG(hw, E1000_ICR);
++ ew32(IMC, 0xffffffff);
++ icr = er32(ICR);
++
++ /* Install any alternate MAC address into RAR0 */
++ ret_val = e1000_check_alt_mac_addr_generic(hw);
++ if (ret_val)
++ goto out;
++
++ e1000e_set_laa_state_82571(hw, true);
+
-+ if (!(e1000_check_alt_mac_addr_generic(hw)))
-+ e1000_set_laa_state_82571(hw, true);
++ /* Reinitialize the 82571 serdes link state machine */
++ if (hw->phy.media_type == e1000_media_type_internal_serdes)
++ hw->mac.serdes_link_state = e1000_serdes_link_down;
+
+out:
+ return ret_val;
+ s32 ret_val;
+ u16 i, rar_count = mac->rar_entry_count;
+
-+ DEBUGFUNC("e1000_init_hw_82571");
-+
+ e1000_initialize_hw_bits_82571(hw);
+
+ /* Initialize identification LED */
-+ ret_val = e1000_id_led_init_generic(hw);
++ ret_val = mac->ops.id_led_init(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error initializing identification LED\n");
++ e_dbg("Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
+ }
+
+ /* Disabling VLAN filtering */
-+ DEBUGOUT("Initializing the IEEE VLAN\n");
-+ mac->ops.clear_vfta(hw);
++ e_dbg("Initializing the IEEE VLAN\n");
++ e1000e_clear_vfta(hw);
+
+ /* Setup the receive address. */
+ /*
+ * 82571, we must reserve a RAR for it to work around an issue where
+ * resetting one port will reload the MAC on the other port.
+ */
-+ if (e1000_get_laa_state_82571(hw))
++ if (e1000e_get_laa_state_82571(hw))
+ rar_count--;
-+ e1000_init_rx_addrs_generic(hw, rar_count);
++ e1000e_init_rx_addrs(hw, rar_count);
+
+ /* Zero out the Multicast HASH table */
-+ DEBUGOUT("Zeroing the MTA\n");
++ e_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+ ret_val = mac->ops.setup_link(hw);
+
+ /* Set the transmit descriptor write-back policy */
-+ reg_data = E1000_READ_REG(hw, E1000_TXDCTL(0));
++ reg_data = er32(TXDCTL(0));
+ reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB |
+ E1000_TXDCTL_COUNT_DESC;
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(0), reg_data);
++ ew32(TXDCTL(0), reg_data);
+
+ /* ...for both queues. */
-+ if (mac->type != e1000_82573 && mac->type != e1000_82574) {
-+ reg_data = E1000_READ_REG(hw, E1000_TXDCTL(1));
-+ reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
-+ E1000_TXDCTL_FULL_TX_DESC_WB |
-+ E1000_TXDCTL_COUNT_DESC;
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(1), reg_data);
-+ } else {
-+ e1000_enable_tx_pkt_filtering_generic(hw);
-+ reg_data = E1000_READ_REG(hw, E1000_GCR);
++ switch (mac->type) {
++ case e1000_82574:
++ case e1000_82583:
++ case e1000_82573:
++ e1000e_enable_tx_pkt_filtering(hw);
++ reg_data = er32(GCR);
+ reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
-+ E1000_WRITE_REG(hw, E1000_GCR, reg_data);
++ ew32(GCR, reg_data);
++ break;
++ default:
++ reg_data = er32(TXDCTL(1));
++ reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
++ E1000_TXDCTL_FULL_TX_DESC_WB |
++ E1000_TXDCTL_COUNT_DESC;
++ ew32(TXDCTL(1), reg_data);
++ break;
+ }
+
+ /*
+{
+ u32 reg;
+
-+ DEBUGFUNC("e1000_initialize_hw_bits_82571");
-+
-+ if (hw->mac.disable_hw_init_bits)
-+ goto out;
-+
+ /* Transmit Descriptor Control 0 */
-+ reg = E1000_READ_REG(hw, E1000_TXDCTL(0));
++ reg = er32(TXDCTL(0));
+ reg |= (1 << 22);
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(0), reg);
++ ew32(TXDCTL(0), reg);
+
+ /* Transmit Descriptor Control 1 */
-+ reg = E1000_READ_REG(hw, E1000_TXDCTL(1));
++ reg = er32(TXDCTL(1));
+ reg |= (1 << 22);
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(1), reg);
++ ew32(TXDCTL(1), reg);
+
+ /* Transmit Arbitration Control 0 */
-+ reg = E1000_READ_REG(hw, E1000_TARC(0));
++ reg = er32(TARC(0));
+ reg &= ~(0xF << 27); /* 30:27 */
+ switch (hw->mac.type) {
+ case e1000_82571:
+ default:
+ break;
+ }
-+ E1000_WRITE_REG(hw, E1000_TARC(0), reg);
++ ew32(TARC(0), reg);
+
+ /* Transmit Arbitration Control 1 */
-+ reg = E1000_READ_REG(hw, E1000_TARC(1));
++ reg = er32(TARC(1));
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ reg &= ~((1 << 29) | (1 << 30));
+ reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26);
-+ if (E1000_READ_REG(hw, E1000_TCTL) & E1000_TCTL_MULR)
++ if (er32(TCTL) & E1000_TCTL_MULR)
+ reg &= ~(1 << 28);
+ else
+ reg |= (1 << 28);
-+ E1000_WRITE_REG(hw, E1000_TARC(1), reg);
++ ew32(TARC(1), reg);
+ break;
+ default:
+ break;
+ }
+
+ /* Device Control */
-+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
-+ reg = E1000_READ_REG(hw, E1000_CTRL);
++
++ switch (hw->mac.type) {
++ case e1000_82574:
++ case e1000_82583:
++ case e1000_82573:
++ reg = er32(CTRL);
+ reg &= ~(1 << 29);
-+ E1000_WRITE_REG(hw, E1000_CTRL, reg);
++ ew32(CTRL, reg);
++ break;
++ default:
++ break;
+ }
+
+ /* Extended Device Control */
-+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
-+ reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
++ switch (hw->mac.type) {
++ case e1000_82574:
++ case e1000_82583:
++ case e1000_82573:
++ reg = er32(CTRL_EXT);
+ reg &= ~(1 << 23);
+ reg |= (1 << 22);
-+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
++ ew32(CTRL_EXT, reg);
++ break;
++ default:
++ break;
+ }
+
-+ /* PCI-Ex Control Register */
-+ if (hw->mac.type == e1000_82574) {
-+ reg = E1000_READ_REG(hw, E1000_GCR);
++
++ if (hw->mac.type == e1000_82571) {
++ reg = er32(PBA_ECC);
++ reg |= E1000_PBA_ECC_CORR_EN;
++ ew32(PBA_ECC, reg);
++ }
++
++ /*
++ * Workaround for hardware errata.
++ * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
++ */
++
++ if ((hw->mac.type == e1000_82571) ||
++ (hw->mac.type == e1000_82572)) {
++ reg = er32(CTRL_EXT);
++ reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
++ ew32(CTRL_EXT, reg);
++ }
++
++ /* PCI-Ex Control Registers */
++
++ switch (hw->mac.type) {
++ case e1000_82574:
++ case e1000_82583:
++ reg = er32(GCR);
+ reg |= (1 << 22);
-+ E1000_WRITE_REG(hw, E1000_GCR, reg);
++ ew32(GCR, reg);
++ /*
++ * Workaround for hardware errata.
++ * apply workaround for hardware errata documented in errata
++ * docs Fixes issue where some error prone or unreliable PCIe
++ * completions are occurring, particularly with ASPM enabled.
++ * Without fix, issue can cause tx timeouts.
++ */
++ reg = er32(GCR2);
++ reg |= 1;
++ ew32(GCR2, reg);
++ break;
++ default:
++ break;
+ }
+
-+out:
+ return;
+}
+
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
+
-+ DEBUGFUNC("e1000_clear_vfta_82571");
-+
-+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
++ switch (hw->mac.type) {
++ case e1000_82574:
++ case e1000_82583:
++ case e1000_82573:
+ if (hw->mng_cookie.vlan_id != 0) {
+ /*
-+ * The VFTA is a 4096b bit-field, each identifying
-+ * a single VLAN ID. The following operations
-+ * determine which 32b entry (i.e. offset) into the
-+ * array we want to set the VLAN ID (i.e. bit) of
-+ * the manageability unit.
-+ */
++ *The VFTA is a 4096b bit-field, each identifying
++ *a single VLAN ID. The following operations
++ *determine which 32b entry (i.e. offset) into the
++ *array we want to set the VLAN ID (i.e. bit) of
++ *the manageability unit.
++ */
+ vfta_offset = (hw->mng_cookie.vlan_id >>
-+ E1000_VFTA_ENTRY_SHIFT) &
-+ E1000_VFTA_ENTRY_MASK;
++ E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK;
+ vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
-+ E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
++ E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ }
-+ }
-+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
-+ /*
-+ * If the offset we want to clear is the same offset of the
-+ * manageability VLAN ID, then clear all bits except that of
-+ * the manageability unit.
-+ */
-+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
-+ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value);
-+ E1000_WRITE_FLUSH(hw);
++
++ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
++ /*
++ *If the offset we want to clear is the same offset of
++ *the manageability VLAN ID, then clear all bits except
++ *that of the manageability unit
++ */
++ vfta_value = (offset == vfta_offset) ?
++ vfta_bit_in_reg : 0;
++ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset,
++ vfta_value);
++ e1e_flush();
++ }
++ break;
++ default:
++ break;
+ }
+}
+
+{
+ u16 data;
+
-+ DEBUGFUNC("e1000_check_mng_mode_82574");
-+
-+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &data);
-+ return ((data & E1000_NVM_INIT_CTRL2_MNGM) != 0);
++ e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
++ return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0;
+}
+
+/**
+ * e1000_led_on_82574 - Turn LED on
+ * @hw: pointer to the HW structure
-+ *
++ *
+ * Turn LED on.
+ **/
+static s32 e1000_led_on_82574(struct e1000_hw *hw)
+ u32 ctrl;
+ u32 i;
+
-+ DEBUGFUNC("e1000_led_on_82574");
-+
+ ctrl = hw->mac.ledctl_mode2;
-+ if (!(E1000_STATUS_LU & E1000_READ_REG(hw, E1000_STATUS))) {
-+ /*
-+ * If no link, then turn LED on by setting the invert bit
++ if (!(E1000_STATUS_LU & er32(STATUS))) {
++ /*
++ * If no link, then turn LED on by setting the invert bit
+ * for each LED that's "on" (0x0E) in ledctl_mode2.
+ */
+ for (i = 0; i < 4; i++)
+ E1000_LEDCTL_MODE_LED_ON)
+ ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8));
+ }
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, ctrl);
++ ew32(LEDCTL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
-+/**
-+ * e1000_update_mc_addr_list_82571 - Update Multicast addresses
-+ * @hw: pointer to the HW structure
-+ * @mc_addr_list: array of multicast addresses to program
-+ * @mc_addr_count: number of multicast addresses to program
-+ * @rar_used_count: the first RAR register free to program
-+ * @rar_count: total number of supported Receive Address Registers
-+ *
-+ * Updates the Receive Address Registers and Multicast Table Array.
-+ * The caller must have a packed mc_addr_list of multicast addresses.
-+ * The parameter rar_count will usually be hw->mac.rar_entry_count
-+ * unless there are workarounds that change this.
-+ **/
-+static void e1000_update_mc_addr_list_82571(struct e1000_hw *hw,
-+ u8 *mc_addr_list, u32 mc_addr_count,
-+ u32 rar_used_count, u32 rar_count)
-+{
-+ DEBUGFUNC("e1000_update_mc_addr_list_82571");
-+
-+ if (e1000_get_laa_state_82571(hw))
-+ rar_count--;
-+
-+ e1000_update_mc_addr_list_generic(hw, mc_addr_list, mc_addr_count,
-+ rar_used_count, rar_count);
-+}
+
+/**
+ * e1000_setup_link_82571 - Setup flow control and link settings
+ **/
+static s32 e1000_setup_link_82571(struct e1000_hw *hw)
+{
-+ DEBUGFUNC("e1000_setup_link_82571");
-+
+ /*
+ * 82573 does not have a word in the NVM to determine
+ * the default flow control setting, so we explicitly
+ * set it to full.
+ */
-+ if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) &&
-+ hw->fc.type == e1000_fc_default)
-+ hw->fc.type = e1000_fc_full;
-+
-+ return e1000_setup_link_generic(hw);
-+}
++ switch (hw->mac.type) {
++ case e1000_82574:
++ case e1000_82583:
++ case e1000_82573:
++ if (hw->fc.requested_mode == e1000_fc_default)
++ hw->fc.requested_mode = e1000_fc_full;
++ break;
++ default:
++ break;
++ }
++ return e1000e_setup_link(hw);
++}
+
+/**
+ * e1000_setup_copper_link_82571 - Configure copper link settings
+ **/
+static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
+{
-+ u32 ctrl, led_ctrl;
++ u32 ctrl;
+ s32 ret_val;
+
-+ DEBUGFUNC("e1000_setup_copper_link_82571");
-+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+
+ switch (hw->phy.type) {
+ case e1000_phy_m88:
+ case e1000_phy_bm:
-+ ret_val = e1000_copper_link_setup_m88(hw);
++ ret_val = e1000e_copper_link_setup_m88(hw);
+ break;
+ case e1000_phy_igp_2:
-+ ret_val = e1000_copper_link_setup_igp(hw);
-+ /* Setup activity LED */
-+ led_ctrl = E1000_READ_REG(hw, E1000_LEDCTL);
-+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
-+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, led_ctrl);
++ ret_val = e1000e_copper_link_setup_igp(hw);
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ if (ret_val)
+ goto out;
+
-+ ret_val = e1000_setup_copper_link_generic(hw);
++ ret_val = e1000e_setup_copper_link(hw);
+
+out:
+ return ret_val;
+ **/
+static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
+{
-+ DEBUGFUNC("e1000_setup_fiber_serdes_link_82571");
-+
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ * mode. This prevents drivers from twiddling their thumbs
+ * if another tool failed to take it out of loopback mode.
+ */
-+ E1000_WRITE_REG(hw, E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
++ ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+ break;
+ default:
+ break;
+ }
+
-+ return e1000_setup_fiber_serdes_link_generic(hw);
++ return e1000e_setup_fiber_serdes_link(hw);
++}
++
++/**
++ * e1000_check_for_serdes_link_82571 - Check for link (Serdes)
++ * @hw: pointer to the HW structure
++ *
++ * Reports the link state as up or down.
++ *
++ * If autonegotiation is supported by the link partner, the link state is
++ * determined by the result of autongotiation. This is the most likely case.
++ * If autonegotiation is not supported by the link partner, and the link
++ * has a valid signal, force the link up.
++ *
++ * The link state is represented internally here by 4 states:
++ *
++ * 1) down
++ * 2) autoneg_progress
++ * 3) autoneg_complete (the link sucessfully autonegotiated)
++ * 4) forced_up (the link has been forced up, it did not autonegotiate)
++ *
++ **/
++s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
++{
++ struct e1000_mac_info *mac = &hw->mac;
++ u32 rxcw;
++ u32 ctrl;
++ u32 status;
++ s32 ret_val = E1000_SUCCESS;
++
++ ctrl = er32(CTRL);
++ status = er32(STATUS);
++ rxcw = er32(RXCW);
++
++ if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
++
++ /* Receiver is synchronized with no invalid bits. */
++ switch (mac->serdes_link_state) {
++ case e1000_serdes_link_autoneg_complete:
++ if (!(status & E1000_STATUS_LU)) {
++ /*
++ * We have lost link, retry autoneg before
++ * reporting link failure
++ */
++ mac->serdes_link_state =
++ e1000_serdes_link_autoneg_progress;
++ mac->serdes_has_link = false;
++ e_dbg("AN_UP -> AN_PROG\n");
++ }
++ break;
++
++ case e1000_serdes_link_forced_up:
++ /*
++ * If we are receiving /C/ ordered sets, re-enable
++ * auto-negotiation in the TXCW register and disable
++ * forced link in the Device Control register in an
++ * attempt to auto-negotiate with our link partner.
++ */
++ if (rxcw & E1000_RXCW_C) {
++ /* Enable autoneg, and unforce link up */
++ ew32(TXCW, mac->txcw);
++ ew32(CTRL,
++ (ctrl & ~E1000_CTRL_SLU));
++ mac->serdes_link_state =
++ e1000_serdes_link_autoneg_progress;
++ mac->serdes_has_link = false;
++ e_dbg("FORCED_UP -> AN_PROG\n");
++ }
++ break;
++
++ case e1000_serdes_link_autoneg_progress:
++ if (rxcw & E1000_RXCW_C) {
++ /* We received /C/ ordered sets, meaning the
++ * link partner has autonegotiated, and we can
++ * trust the Link Up (LU) status bit
++ */
++ if (status & E1000_STATUS_LU) {
++ mac->serdes_link_state =
++ e1000_serdes_link_autoneg_complete;
++ e_dbg("AN_PROG -> AN_UP\n");
++ mac->serdes_has_link = true;
++ } else {
++ /* Autoneg completed, but failed */
++ mac->serdes_link_state =
++ e1000_serdes_link_down;
++ e_dbg("AN_PROG -> DOWN\n");
++ }
++ } else {
++ /* The link partner did not autoneg.
++ * Force link up and full duplex, and change
++ * state to forced.
++ */
++ ew32(TXCW,
++ (mac->txcw & ~E1000_TXCW_ANE));
++ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
++ ew32(CTRL, ctrl);
++
++ /* Configure Flow Control after link up. */
++ ret_val =
++ e1000e_config_fc_after_link_up(hw);
++ if (ret_val) {
++ e_dbg("Error config flow control\n");
++ break;
++ }
++ mac->serdes_link_state =
++ e1000_serdes_link_forced_up;
++ mac->serdes_has_link = true;
++ e_dbg("AN_PROG -> FORCED_UP\n");
++ }
++ break;
++
++ case e1000_serdes_link_down:
++ default:
++ /* The link was down but the receiver has now gained
++ * valid sync, so lets see if we can bring the link
++ * up. */
++ ew32(TXCW, mac->txcw);
++ ew32(CTRL,
++ (ctrl & ~E1000_CTRL_SLU));
++ mac->serdes_link_state =
++ e1000_serdes_link_autoneg_progress;
++ e_dbg("DOWN -> AN_PROG\n");
++ break;
++ }
++ } else {
++ if (!(rxcw & E1000_RXCW_SYNCH)) {
++ mac->serdes_has_link = false;
++ mac->serdes_link_state = e1000_serdes_link_down;
++ e_dbg("ANYSTATE -> DOWN\n");
++ } else {
++ /*
++ * We have sync, and can tolerate one
++ * invalid (IV) codeword before declaring
++ * link down, so reread to look again
++ */
++ udelay(10);
++ rxcw = er32(RXCW);
++ if (rxcw & E1000_RXCW_IV) {
++ mac->serdes_link_state = e1000_serdes_link_down;
++ mac->serdes_has_link = false;
++ e_dbg("ANYSTATE -> DOWN\n");
++ }
++ }
++ }
++
++ return ret_val;
+}
+
+/**
+{
+ s32 ret_val;
+
-+ DEBUGFUNC("e1000_valid_led_default_82571");
-+
-+ ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
++ ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
++ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
-+ if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) &&
-+ *data == ID_LED_RESERVED_F746)
-+ *data = ID_LED_DEFAULT_82573;
-+ else if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
-+ *data = ID_LED_DEFAULT;
++ switch (hw->mac.type) {
++ case e1000_82574:
++ case e1000_82583:
++ case e1000_82573:
++ if(*data == ID_LED_RESERVED_F746)
++ *data = ID_LED_DEFAULT_82573;
++ break;
++ default:
++ if (*data == ID_LED_RESERVED_0000 ||
++ *data == ID_LED_RESERVED_FFFF)
++ *data = ID_LED_DEFAULT;
++ break;
++ }
++
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_get_laa_state_82571 - Get locally administered address state
++ * e1000e_get_laa_state_82571 - Get locally administered address state
+ * @hw: pointer to the HW structure
+ *
+ * Retrieve and return the current locally administered address state.
+ **/
-+bool e1000_get_laa_state_82571(struct e1000_hw *hw)
++bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
+{
-+ struct e1000_dev_spec_82571 *dev_spec;
-+ bool state = false;
-+
-+ DEBUGFUNC("e1000_get_laa_state_82571");
-+
+ if (hw->mac.type != e1000_82571)
-+ goto out;
-+
-+ dev_spec = (struct e1000_dev_spec_82571 *)hw->dev_spec;
++ return false;
+
-+ state = dev_spec->laa_is_present;
-+
-+out:
-+ return state;
++ return hw->dev_spec._82571.laa_is_present;
+}
+
+/**
-+ * e1000_set_laa_state_82571 - Set locally administered address state
++ * e1000e_set_laa_state_82571 - Set locally administered address state
+ * @hw: pointer to the HW structure
+ * @state: enable/disable locally administered address
+ *
+ * Enable/Disable the current locally administered address state.
+ **/
-+void e1000_set_laa_state_82571(struct e1000_hw *hw, bool state)
++void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
+{
-+ struct e1000_dev_spec_82571 *dev_spec;
-+
-+ DEBUGFUNC("e1000_set_laa_state_82571");
-+
+ if (hw->mac.type != e1000_82571)
-+ goto out;
-+
-+ dev_spec = (struct e1000_dev_spec_82571 *)hw->dev_spec;
++ return;
+
-+ dev_spec->laa_is_present = state;
++ hw->dev_spec._82571.laa_is_present = state;
+
+ /* If workaround is activated... */
-+ if (state) {
++ if (state)
+ /*
+ * Hold a copy of the LAA in RAR[14] This is done so that
+ * between the time RAR[0] gets clobbered and the time it
+ * incoming packets directed to this port are dropped.
+ * Eventually the LAA will be in RAR[0] and RAR[14].
+ */
-+ e1000_rar_set_generic(hw, hw->mac.addr,
++ e1000e_rar_set(hw, hw->mac.addr,
+ hw->mac.rar_entry_count - 1);
-+ }
-+
-+out:
+ return;
+}
+
+ s32 ret_val = E1000_SUCCESS;
+ u16 data;
+
-+ DEBUGFUNC("e1000_fix_nvm_checksum_82571");
-+
+ if (nvm->type != e1000_nvm_flash_hw)
+ goto out;
+
+ * Check bit 4 of word 10h. If it is 0, firmware is done updating
+ * 10h-12h. Checksum may need to be fixed.
+ */
-+ ret_val = nvm->ops.read(hw, 0x10, 1, &data);
++ ret_val = e1000_read_nvm(hw, 0x10, 1, &data);
+ if (ret_val)
+ goto out;
+
+ * we need to set this bit to a 1 and update the
+ * checksum.
+ */
-+ ret_val = nvm->ops.read(hw, 0x23, 1, &data);
++ ret_val = e1000_read_nvm(hw, 0x23, 1, &data);
+ if (ret_val)
+ goto out;
+
+ if (!(data & 0x8000)) {
+ data |= 0x8000;
-+ ret_val = nvm->ops.write(hw, 0x23, 1, &data);
++ ret_val = e1000_write_nvm(hw, 0x23, 1, &data);
+ if (ret_val)
+ goto out;
-+ ret_val = nvm->ops.update(hw);
++ ret_val = e1000e_update_nvm_checksum(hw);
+ }
+ }
+
+ return ret_val;
+}
+
++
+/**
+ * e1000_read_mac_addr_82571 - Read device MAC address
+ * @hw: pointer to the HW structure
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_read_mac_addr_82571");
-+ if (e1000_check_alt_mac_addr_generic(hw))
-+ ret_val = e1000_read_mac_addr_generic(hw);
++ /*
++ * If there's an alternate MAC address place it in RAR0
++ * so that it will override the Si installed default perm
++ * address.
++ */
++ ret_val = e1000_check_alt_mac_addr_generic(hw);
++ if (ret_val)
++ goto out;
++
++ ret_val = e1000e_read_mac_addr_generic(hw);
+
++out:
+ return ret_val;
+}
+
+ return;
+
+ /* If the management interface is not enabled, then power down */
-+ if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
++ if (!(mac->ops.check_mng_mode(hw) || e1000_check_reset_block(hw)))
+ e1000_power_down_phy_copper(hw);
+
+ return;
+ **/
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
+{
-+ volatile u32 temp;
-+
-+ DEBUGFUNC("e1000_clear_hw_cntrs_82571");
-+
-+ e1000_clear_hw_cntrs_base_generic(hw);
-+ temp = E1000_READ_REG(hw, E1000_PRC64);
-+ temp = E1000_READ_REG(hw, E1000_PRC127);
-+ temp = E1000_READ_REG(hw, E1000_PRC255);
-+ temp = E1000_READ_REG(hw, E1000_PRC511);
-+ temp = E1000_READ_REG(hw, E1000_PRC1023);
-+ temp = E1000_READ_REG(hw, E1000_PRC1522);
-+ temp = E1000_READ_REG(hw, E1000_PTC64);
-+ temp = E1000_READ_REG(hw, E1000_PTC127);
-+ temp = E1000_READ_REG(hw, E1000_PTC255);
-+ temp = E1000_READ_REG(hw, E1000_PTC511);
-+ temp = E1000_READ_REG(hw, E1000_PTC1023);
-+ temp = E1000_READ_REG(hw, E1000_PTC1522);
-+
-+ temp = E1000_READ_REG(hw, E1000_ALGNERRC);
-+ temp = E1000_READ_REG(hw, E1000_RXERRC);
-+ temp = E1000_READ_REG(hw, E1000_TNCRS);
-+ temp = E1000_READ_REG(hw, E1000_CEXTERR);
-+ temp = E1000_READ_REG(hw, E1000_TSCTC);
-+ temp = E1000_READ_REG(hw, E1000_TSCTFC);
-+
-+ temp = E1000_READ_REG(hw, E1000_MGTPRC);
-+ temp = E1000_READ_REG(hw, E1000_MGTPDC);
-+ temp = E1000_READ_REG(hw, E1000_MGTPTC);
-+
-+ temp = E1000_READ_REG(hw, E1000_IAC);
-+ temp = E1000_READ_REG(hw, E1000_ICRXOC);
-+
-+ temp = E1000_READ_REG(hw, E1000_ICRXPTC);
-+ temp = E1000_READ_REG(hw, E1000_ICRXATC);
-+ temp = E1000_READ_REG(hw, E1000_ICTXPTC);
-+ temp = E1000_READ_REG(hw, E1000_ICTXATC);
-+ temp = E1000_READ_REG(hw, E1000_ICTXQEC);
-+ temp = E1000_READ_REG(hw, E1000_ICTXQMTC);
-+ temp = E1000_READ_REG(hw, E1000_ICRXDMTC);
++ e1000e_clear_hw_cntrs_base(hw);
++
++ er32(PRC64);
++ er32(PRC127);
++ er32(PRC255);
++ er32(PRC511);
++ er32(PRC1023);
++ er32(PRC1522);
++ er32(PTC64);
++ er32(PTC127);
++ er32(PTC255);
++ er32(PTC511);
++ er32(PTC1023);
++ er32(PTC1522);
++
++ er32(ALGNERRC);
++ er32(RXERRC);
++ er32(TNCRS);
++ er32(CEXTERR);
++ er32(TSCTC);
++ er32(TSCTFC);
++
++ er32(MGTPRC);
++ er32(MGTPDC);
++ er32(MGTPTC);
++
++ er32(IAC);
++ er32(ICRXOC);
++
++ er32(ICRXPTC);
++ er32(ICRXATC);
++ er32(ICTXPTC);
++ er32(ICTXATC);
++ er32(ICTXQEC);
++ er32(ICTXQMTC);
++ er32(ICRXDMTC);
+}
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_82571.h linux-2.6.22-10/drivers/net/e1000e/e1000_82571.h
--- linux-2.6.22-0/drivers/net/e1000e/e1000_82571.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_82571.h 2008-10-14 01:51:32.000000000 +0200
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_82571.h 2009-06-24 00:32:20.000000000 +0200
@@ -0,0 +1,53 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+
+#define E1000_RXCFGL 0x0B634 /* TimeSync Rx EtherType & Msg Type Reg - RW */
+
-+bool e1000_get_laa_state_82571(struct e1000_hw *hw);
-+void e1000_set_laa_state_82571(struct e1000_hw *hw, bool state);
++bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
++void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_defines.h linux-2.6.22-10/drivers/net/e1000e/e1000_defines.h
--- linux-2.6.22-0/drivers/net/e1000e/e1000_defines.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_defines.h 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,1437 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_defines.h 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,1466 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
-+#define E1000_WUFC_IGNORE_TCO_BM 0x00000800 /* Ignore WakeOn TCO packets */
-+#define E1000_WUFC_FLX0_BM 0x00001000 /* Flexible Filter 0 Enable */
-+#define E1000_WUFC_FLX1_BM 0x00002000 /* Flexible Filter 1 Enable */
-+#define E1000_WUFC_FLX2_BM 0x00004000 /* Flexible Filter 2 Enable */
-+#define E1000_WUFC_FLX3_BM 0x00008000 /* Flexible Filter 3 Enable */
++#define E1000_WUFC_IGNORE_TCO_PHY 0x00000800 /* Ignore WakeOn TCO packets */
++#define E1000_WUFC_FLX0_PHY 0x00001000 /* Flexible Filter 0 Enable */
++#define E1000_WUFC_FLX1_PHY 0x00002000 /* Flexible Filter 1 Enable */
++#define E1000_WUFC_FLX2_PHY 0x00004000 /* Flexible Filter 2 Enable */
++#define E1000_WUFC_FLX3_PHY 0x00008000 /* Flexible Filter 3 Enable */
++#define E1000_WUFC_FLX4_PHY 0x00000200 /* Flexible Filter 4 Enable */
++#define E1000_WUFC_FLX5_PHY 0x00000400 /* Flexible Filter 5 Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
-+#define E1000_WUFC_ALL_FILTERS_BM 0x0000F0FF /* Mask for all wakeup filters */
-+#define E1000_WUFC_FLX_OFFSET_BM 12 /* Offset to the Flexible Filters bits */
-+#define E1000_WUFC_FLX_FILTERS_BM 0x0000F000 /* Mask for the 4 flexible filters */
++#define E1000_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */
++#define E1000_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
++#define E1000_WUFC_ALL_FILTERS_PHY_4 0x0000F0FF /*Mask for all wakeup filters*/
++#define E1000_WUFC_FLX_OFFSET_PHY 12 /* Offset to the Flexible Filters bits */
++#define E1000_WUFC_FLX_FILTERS_PHY_4 0x0000F000 /*Mask for 4 flexible filters*/
++#define E1000_WUFC_ALL_FILTERS_PHY_6 0x0000F6FF /*Mask for 6 wakeup filters */
++#define E1000_WUFC_FLX_FILTERS_PHY_6 0x0000F600 /*Mask for 6 flexible filters*/
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
++#define E1000_WUFC_ALL_FILTERS_6 0x003F00FF /* Mask for all 6 wakeup filters*/
+#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
-+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
++#define E1000_WUFC_FLX_FILTERS 0x000F0000 /*Mask for the 4 flexible filters */
++#define E1000_WUFC_FLX_FILTERS_6 0x003F0000 /* Mask for 6 flexible filters */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC E1000_WUFC_LNKC
+#define E1000_WUS_ARP E1000_WUFC_ARP
+#define E1000_WUS_IPV4 E1000_WUFC_IPV4
+#define E1000_WUS_IPV6 E1000_WUFC_IPV6
-+#define E1000_WUS_FLX0_BM E1000_WUFC_FLX0_BM
-+#define E1000_WUS_FLX1_BM E1000_WUFC_FLX1_BM
-+#define E1000_WUS_FLX2_BM E1000_WUFC_FLX2_BM
-+#define E1000_WUS_FLX3_BM E1000_WUFC_FLX3_BM
-+#define E1000_WUS_FLX_FILTERS_BM E1000_WUFC_FLX_FILTERS_BM
++#define E1000_WUS_FLX0_PHY E1000_WUFC_FLX0_PHY
++#define E1000_WUS_FLX1_PHY E1000_WUFC_FLX1_PHY
++#define E1000_WUS_FLX2_PHY E1000_WUFC_FLX2_PHY
++#define E1000_WUS_FLX3_PHY E1000_WUFC_FLX3_PHY
++#define E1000_WUS_FLX_FILTERS_PHY_4 E1000_WUFC_FLX_FILTERS_PHY_4
+#define E1000_WUS_FLX0 E1000_WUFC_FLX0
+#define E1000_WUS_FLX1 E1000_WUFC_FLX1
+#define E1000_WUS_FLX2 E1000_WUFC_FLX2
+#define E1000_WUS_FLX3 E1000_WUFC_FLX3
++#define E1000_WUS_FLX4 E1000_WUFC_FLX4
++#define E1000_WUS_FLX5 E1000_WUFC_FLX5
++#define E1000_WUS_FLX4_PHY E1000_WUFC_FLX4_PHY
++#define E1000_WUS_FLX5_PHY E1000_WUFC_FLX5_PHY
+#define E1000_WUS_FLX_FILTERS E1000_WUFC_FLX_FILTERS
++#define E1000_WUS_FLX_FILTERS_6 E1000_WUFC_FLX_FILTERS_6
++#define E1000_WUS_FLX_FILTERS_PHY_6 E1000_WUFC_FLX_FILTERS_PHY_6
+
+/* Wake Up Packet Length */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
++/* Six Flexible Filters are supported */
++#define E1000_FLEXIBLE_FILTER_COUNT_MAX_6 6
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
++#define E1000_FFLT_SIZE_6 E1000_FLEXIBLE_FILTER_COUNT_MAX_6
+#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
++#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
+#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
+#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
-+#define E1000_CTRL_EXT_CANC 0x04000000 /* Interrupt delay cancellation */
++#define E1000_CTRL_EXT_CANC 0x04000000 /* Int delay cancellation */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+/* IAME enable bit (27) was removed in >= 82575 */
-+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
-+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
-+#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
-+#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
++#define E1000_CTRL_EXT_IAME 0x08000000 /* Int acknowledge Auto-mask */
++#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error
++ * detection enabled */
++#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity
++ * error detection enable */
+#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_LSECCK 0x00001000
++#define E1000_CTRL_EXT_PHYPDEN 0x00100000
+#define E1000_I2CCMD_REG_ADDR_SHIFT 16
+#define E1000_I2CCMD_REG_ADDR 0x00FF0000
+#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
-+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
-+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
++#define E1000_RCTL_UPE 0x00000008 /* unicast promisc enable */
++#define E1000_RCTL_MPE 0x00000010 /* multicast promisc enable */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
-+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
-+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
-+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
++#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min thresh size */
++#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min thresh size */
++#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min thresh size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
-+#define E1000_SWFW_EEP_SM 0x1
-+#define E1000_SWFW_PHY0_SM 0x2
-+#define E1000_SWFW_PHY1_SM 0x4
-+#define E1000_SWFW_CSR_SM 0x8
++#define E1000_SWFW_EEP_SM 0x01
++#define E1000_SWFW_PHY0_SM 0x02
++#define E1000_SWFW_PHY1_SM 0x04
++#define E1000_SWFW_CSR_SM 0x08
+
+/* FACTPS Definitions */
+#define E1000_FACTPS_LFS 0x40000000 /* LAN Function Select */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
-+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
++#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
-+#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
-+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
-+#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
++#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock
++ * indication in SDP[0] */
++#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through
++ * PHYRST_N pin */
++#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external
++ * LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
-+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
++#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to ME */
+#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */
+
-+/* Bit definitions for the Management Data IO (MDIO) and Management Data
++/*
++ * Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
-+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
++#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
-+#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
-+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
++#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
++#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state.
++ * Clear on write '0'. */
++#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master request status */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
-+#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
++#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution
++ * disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_FUSE_8 0x04000000
+#define E1000_STATUS_FUSE_9 0x08000000
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
+
+/* Constants used to interpret the masked PCI-X bus speed. */
-+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
-+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
-+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
++#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
++#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
++#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /*PCI-X bus speed 100-133 MHz*/
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define ADVERTISE_1000_FULL 0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
-+#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
++#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
-+#define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
++#define E1000_ALL_NOT_GIG (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
++#define E1000_PHY_LED0_MODE_MASK 0x00000007
++#define E1000_PHY_LED0_IVRT 0x00000008
++#define E1000_PHY_LED0_BLINK 0x00000010
++#define E1000_PHY_LED0_MASK 0x0000001F
++
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK_RATE 0x00000020
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+
+/* PBA constants */
-+#define E1000_PBA_6K 0x0006 /* 6KB */
++#define E1000_PBA_6K 0x0006 /* 6KB */
+#define E1000_PBA_8K 0x0008 /* 8KB */
++#define E1000_PBA_10K 0x000A /* 10KB */
+#define E1000_PBA_12K 0x000C /* 12KB */
++#define E1000_PBA_14K 0x000E /* 14KB */
+#define E1000_PBA_16K 0x0010 /* 16KB */
++#define E1000_PBA_18K 0x0012
+#define E1000_PBA_20K 0x0014
+#define E1000_PBA_22K 0x0016
+#define E1000_PBA_24K 0x0018
++#define E1000_PBA_26K 0x001A
+#define E1000_PBA_30K 0x001E
+#define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
++#define E1000_PBA_35K 0x0023
+#define E1000_PBA_38K 0x0026
+#define E1000_PBA_40K 0x0028
+#define E1000_PBA_48K 0x0030 /* 48KB */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
++#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */
++
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
-+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
-+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
-+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
-+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
++#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver
++ * should claim the interrupt */
++#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* Q0 Rx desc FIFO parity error */
++#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* Q0 Tx desc FIFO parity error */
++#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity err */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
-+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
-+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
++#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* Q1 Rx desc FIFO parity error */
++#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* Q1 Tx desc FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
-+#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
-+#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
++#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW
++ * bit in the FWSM */
++#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates
++ * an interrupt */
++#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */
+#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */
+#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
+#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
+#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
+#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
+
-+/* Extended Interrupt Cause Read */
-+#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */
-+#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */
-+#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */
-+#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */
-+#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */
-+#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */
-+#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */
-+#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */
-+#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */
-+#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
-+/* TCP Timer */
-+#define E1000_TCPTIMER_KS 0x00000100 /* KickStart */
-+#define E1000_TCPTIMER_COUNT_ENABLE 0x00000200 /* Count Enable */
-+#define E1000_TCPTIMER_COUNT_FINISH 0x00000400 /* Count finish */
-+#define E1000_TCPTIMER_LOOP 0x00000800 /* Loop */
++/* PBA ECC Register */
++#define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
++#define E1000_PBA_ECC_COUNTER_SHIFT 20 /* ECC counter shift value */
++#define E1000_PBA_ECC_CORR_EN 0x00000001 /* Enable ECC error correction */
++#define E1000_PBA_ECC_STAT_CLR 0x00000002 /* Clear ECC error counter */
++#define E1000_PBA_ECC_INT_EN 0x00000004 /* Enable ICR bit 5 on ECC error */
+
+/*
+ * This defines the bits that are set in the Interrupt Mask
+ E1000_IMS_LSC)
+
+/* Interrupt Mask Set */
-+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
++#define E1000_IMS_TXDW E1000_ICR_TXDW /* Tx desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
++#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
-+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
-+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
-+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
++#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* Q0 Rx desc FIFO
++ * parity error */
++#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* Q0 Tx desc FIFO
++ * parity error */
++#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer
++ * parity error */
++#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity
++ * error */
++#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* Q1 Rx desc FIFO
++ * parity error */
++#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* Q1 Tx desc FIFO
++ * parity error */
+#define E1000_IMS_DSW E1000_ICR_DSW
+#define E1000_IMS_PHYINT E1000_ICR_PHYINT
++#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+#define E1000_IMS_EPRST E1000_ICR_EPRST
+#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
+#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
+#define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */
+#define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */
+
-+/* Extended Interrupt Mask Set */
-+#define E1000_EIMS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */
-+#define E1000_EIMS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */
-+#define E1000_EIMS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */
-+#define E1000_EIMS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */
-+#define E1000_EIMS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */
-+#define E1000_EIMS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */
-+#define E1000_EIMS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */
-+#define E1000_EIMS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */
-+#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */
-+#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */
-+
+/* Interrupt Cause Set */
-+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
++#define E1000_ICS_TXDW E1000_ICR_TXDW /* Tx desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
-+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
-+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
-+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
++#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* Q0 Rx desc FIFO
++ * parity error */
++#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* Q0 Tx desc FIFO
++ * parity error */
++#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer
++ * parity error */
++#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity
++ * error */
++#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* Q1 Rx desc FIFO
++ * parity error */
++#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* Q1 Tx desc FIFO
++ * parity error */
+#define E1000_ICS_DSW E1000_ICR_DSW
++#define E1000_ICS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+#define E1000_ICS_PHYINT E1000_ICR_PHYINT
+#define E1000_ICS_EPRST E1000_ICR_EPRST
+
-+/* Extended Interrupt Cause Set */
-+#define E1000_EICS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */
-+#define E1000_EICS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */
-+#define E1000_EICS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */
-+#define E1000_EICS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */
-+#define E1000_EICS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */
-+#define E1000_EICS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */
-+#define E1000_EICS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */
-+#define E1000_EICS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */
-+#define E1000_EICS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */
-+#define E1000_EICS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */
-+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+ */
+#define E1000_RAR_ENTRIES 15
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
++#define E1000_RAL_MAC_ADDR_LEN 4
++#define E1000_RAH_MAC_ADDR_LEN 2
++#define E1000_RAH_POOL_MASK 0x03FC0000
++#define E1000_RAH_POOL_1 0x00040000
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
++#define E1000_ERR_MBX 15
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define FIBER_LINK_UP_LIMIT 50
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+
++
+/* PCI Express Control */
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
++#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
++#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
++#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
++#define E1000_GCR_CAP_VER2 0x00040000
+
+#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
-+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
++#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
-+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
++#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
++#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */
++
+/* NVM Control */
+#define E1000_EECD_SK 0x00000001 /* NVM Clock */
+#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
++#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
+
+#define E1000_NVM_SWDPIN0 0x0001 /* SWDPIN 0 NVM Value */
+#define E1000_NVM_LED_LOGIC 0x0020 /* Led Logic Word */
-+#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */
++#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write regs */
+#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START 1 /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define NVM_COMPAT 0x0003
+#define NVM_ID_LED_SETTINGS 0x0004
+#define NVM_VERSION 0x0005
-+#define NVM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
++#define NVM_SERDES_AMPLITUDE 0x0006 /* SERDES output amplitude */
+#define NVM_PHY_CLASS_WORD 0x0007
+#define NVM_INIT_CONTROL1_REG 0x000A
+#define NVM_INIT_CONTROL2_REG 0x000F
+#define NVM_ALT_MAC_ADDR_PTR 0x0037
+#define NVM_CHECKSUM_REG 0x003F
+
-+#define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */
-+#define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */
++#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
++#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK 0x3000
+#define NVM_WORD_SIZE_BASE_SHIFT 6
+#define NVM_SWDPIO_EXT_SHIFT 4
+
-+/* NVM Commands - Microwire */
-+#define NVM_READ_OPCODE_MICROWIRE 0x6 /* NVM read opcode */
-+#define NVM_WRITE_OPCODE_MICROWIRE 0x5 /* NVM write opcode */
-+#define NVM_ERASE_OPCODE_MICROWIRE 0x7 /* NVM erase opcode */
-+#define NVM_EWEN_OPCODE_MICROWIRE 0x13 /* NVM erase/write enable */
-+#define NVM_EWDS_OPCODE_MICROWIRE 0x10 /* NVM erase/write disable */
-+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
+#define IGP_LED3_MODE 0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
-+#define PCIX_COMMAND_REGISTER 0xE6
-+#define PCIX_STATUS_REGISTER_LO 0xE8
-+#define PCIX_STATUS_REGISTER_HI 0xEA
+#define PCI_HEADER_TYPE_REGISTER 0x0E
+#define PCIE_LINK_STATUS 0x12
++#define PCIE_DEVICE_CONTROL2 0x28
+
-+#define PCIX_COMMAND_MMRBC_MASK 0x000C
-+#define PCIX_COMMAND_MMRBC_SHIFT 0x2
-+#define PCIX_STATUS_HI_MMRBC_MASK 0x0060
-+#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
-+#define PCIX_STATUS_HI_MMRBC_4K 0x3
-+#define PCIX_STATUS_HI_MMRBC_2K 0x2
-+#define PCIX_STATUS_LO_FUNC_MASK 0x7
+#define PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define PCIE_LINK_WIDTH_MASK 0x3F0
+#define PCIE_LINK_WIDTH_SHIFT 4
++#define PCIE_DEVICE_CONTROL2_16ms 0x0005
+
+#ifndef ETH_ADDR_LEN
+#define ETH_ADDR_LEN 6
+#define IFE_C_E_PHY_ID 0x02A80310
+#define BME1000_E_PHY_ID 0x01410CB0
+#define BME1000_E_PHY_ID_R2 0x01410CB1
++#define I82577_E_PHY_ID 0x01540050
++#define I82578_E_PHY_ID 0x004DD040
+#define M88_VENDOR 0x0141
+
+/* M88E1000 Specific Registers */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
-+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
++#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reverse enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+/* 1=CLK125 low, 0=CLK125 toggling */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010
-+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
++#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
-+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
++#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Tx */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
+
++#define I82578_EPSCR_DOWNSHIFT_ENABLE 0x0020
++#define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK 0x001C
++
+/* BME1000 PHY Specific Control Register */
+#define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */
+
+#define E1000_GEN_CTL_ADDRESS_SHIFT 8
+#define E1000_GEN_POLL_TIMEOUT 640
+
-+#endif
++
++
++#endif /* _E1000_DEFINES_H_ */
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000.h linux-2.6.22-10/drivers/net/e1000e/e1000.h
--- linux-2.6.22-0/drivers/net/e1000e/e1000.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000.h 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,447 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000.h 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,673 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+#define _E1000_H_
+
+#include <linux/types.h>
-+#include <linux/timer.h>
+#include <asm/io.h>
+#include <linux/netdevice.h>
++#include <linux/pci.h>
+
+#include "kcompat.h"
-+
-+#include "e1000_hw.h"
++#include "hw.h"
+
+struct e1000_info;
+
+ (strchr(adapter->netdev->name, '%') ? "" : \
+ adapter->netdev->name), ## arg)
+
-+#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
++#ifdef DEBUG
++#define e_dbg(format, arg...) \
++ e_printk(KERN_DEBUG, hw->adapter, format, ## arg)
++#else
++#define e_dbg(format, arg...) do { (void)(hw); } while (0)
++#endif
+
+#define e_err(format, arg...) \
+ e_printk(KERN_ERR, adapter, format, ## arg)
+#define E1000E_INT_MODE_MSIX 2
+
+#endif /* CONFIG_E1000E_MSIX */
-+
++#ifndef CONFIG_E1000E_NAPI
+#define E1000_MAX_INTR 10
+
++#endif /* CONFIG_E1000E_NAPI */
+/* Tx/Rx descriptor defines */
+#define E1000_DEFAULT_TXD 256
+#define E1000_MAX_TXD 4096
-+#define E1000_MIN_TXD 80
++#define E1000_MIN_TXD 64
+
+#define E1000_DEFAULT_RXD 256
+#define E1000_MAX_RXD 4096
-+#define E1000_MIN_RXD 80
++#define E1000_MIN_RXD 64
+
+#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
+
++#define DEFAULT_JUMBO 9234
++
+enum e1000_boards {
+ board_82571,
+ board_82572,
+ board_ich8lan,
+ board_ich9lan,
+ board_ich10lan,
++ board_pchlan,
++ board_82583,
+};
+
+struct e1000_queue_stats {
+ u16 mng_vlan_id;
+ u16 link_speed;
+ u16 link_duplex;
-+
-+ spinlock_t tx_queue_lock; /* prevent concurrent tail updates */
++ u16 eeprom_vers;
+
+ /* track device up/down/testing state */
+ unsigned long state;
+
+ unsigned int rx_ps_pages;
+ u16 rx_ps_bsize0;
++#ifndef CONFIG_E1000E_NAPI
++ u64 rx_dropped_backlog; /* count drops from rx int handler */
++#endif
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct net_device_stats net_stats;
-+ spinlock_t stats_lock; /* prevent concurrent stats updates */
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ u32 eeprom_wol;
+ u32 wol;
+ u32 pba;
++ u32 max_hw_frame_size;
+
+ bool fc_autoneg;
+
+
+ unsigned int flags;
+ unsigned int flags2;
++ struct work_struct downshift_task;
++ struct work_struct update_phy_task;
++ struct work_struct led_blink_task;
+ u32 *config_space;
-+ u32 stats_freq_us; /* stats update freq (microseconds) */
+};
+
+struct e1000_info {
-+ e1000_mac_type mac;
++ enum e1000_mac_type mac;
+ unsigned int flags;
+ unsigned int flags2;
+ u32 pba;
-+ void (*init_ops)(struct e1000_hw *);
++ u32 max_hw_frame_size;
+ s32 (*get_variants)(struct e1000_adapter *);
++ void (*init_ops)(struct e1000_hw *);
+};
+
+/* hardware capability, feature, and workaround flags */
+#define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5)
+#define FLAG_HAS_SWSM_ON_LOAD (1 << 6)
+#define FLAG_HAS_JUMBO_FRAMES (1 << 7)
-+#define FLAG_HAS_ASPM (1 << 8)
+#define FLAG_IS_ICH (1 << 9)
++#ifdef CONFIG_E1000E_MSIX
+#define FLAG_HAS_MSIX (1 << 10)
++#endif
+#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
+#define FLAG_IS_QUAD_PORT_A (1 << 12)
+#define FLAG_IS_QUAD_PORT (1 << 13)
+#define FLAG_MSI_ENABLED (1 << 27)
+#define FLAG_RX_CSUM_ENABLED (1 << 28)
+#define FLAG_TSO_FORCE (1 << 29)
-+#define FLAG_MSI_TEST_FAILED (1 << 30)
-+#define FLAG_RX_RESTART_NOW (1 << 31)
++#define FLAG_RX_RESTART_NOW (1 << 30)
++#define FLAG_MSI_TEST_FAILED (1 << 31)
+
-+#define FLAG2_READ_ONLY_NVM (1 << 1)
++/* CRC Stripping defines */
++#define FLAG2_CRC_STRIPPING (1 << 0)
++#define FLAG2_HAS_PHY_WAKEUP (1 << 1)
+
+#define E1000_RX_DESC_PS(R, i) \
+ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
+extern char e1000e_driver_name[];
+extern const char e1000e_driver_version[];
+
-+extern void e1000_check_options(struct e1000_adapter *adapter);
-+extern void e1000_set_ethtool_ops(struct net_device *netdev);
++extern void e1000e_check_options(struct e1000_adapter *adapter);
++extern void e1000e_set_ethtool_ops(struct net_device *netdev);
+#ifdef ETHTOOL_OPS_COMPAT
+extern int ethtool_ioctl(struct ifreq *ifr);
+#endif
+
-+extern int e1000_up(struct e1000_adapter *adapter);
-+extern void e1000_down(struct e1000_adapter *adapter);
-+extern void e1000_reinit_locked(struct e1000_adapter *adapter);
-+extern void e1000_reset(struct e1000_adapter *adapter);
-+extern int e1000_setup_rx_resources(struct e1000_adapter *adapter);
-+extern int e1000_setup_tx_resources(struct e1000_adapter *adapter);
-+extern void e1000_free_rx_resources(struct e1000_adapter *adapter);
-+extern void e1000_free_tx_resources(struct e1000_adapter *adapter);
-+extern void e1000_update_stats(struct e1000_adapter *adapter);
++extern int e1000e_up(struct e1000_adapter *adapter);
++extern void e1000e_down(struct e1000_adapter *adapter);
++extern void e1000e_reinit_locked(struct e1000_adapter *adapter);
++extern void e1000e_reset(struct e1000_adapter *adapter);
++extern void e1000e_power_up_phy(struct e1000_adapter *adapter);
++extern int e1000e_setup_rx_resources(struct e1000_adapter *adapter);
++extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter);
++extern void e1000e_free_rx_resources(struct e1000_adapter *adapter);
++extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
++extern void e1000e_update_stats(struct e1000_adapter *adapter);
++extern bool e1000_has_link(struct e1000_adapter *adapter);
+#ifdef CONFIG_E1000E_MSIX
-+extern void e1000_set_interrupt_capability(struct e1000_adapter *adapter);
-+extern void e1000_reset_interrupt_capability(struct e1000_adapter *adapter);
++extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
++extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
+#endif
+
+extern unsigned int copybreak;
+
++extern void e1000_init_function_pointers_82571(struct e1000_hw *hw);
++extern void e1000_init_function_pointers_80003es2lan(struct e1000_hw *hw);
++extern void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw);
++
++extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
++
++static inline s32 e1000e_commit_phy(struct e1000_hw *hw)
++{
++ if (hw->phy.ops.commit)
++ return hw->phy.ops.commit(hw);
++
++ return 0;
++}
++
++extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
++
++extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
++extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
++
++extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
++ bool state);
++extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
++extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
++extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
++
++extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
++extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
++extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
++extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
++extern s32 e1000e_led_on_generic(struct e1000_hw *hw);
++extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
++extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
++extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
++extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
++extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
++extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
++extern s32 e1000e_id_led_init(struct e1000_hw *hw);
++extern void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw);
++extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
++extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
++extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
++extern s32 e1000e_setup_link(struct e1000_hw *hw);
++static inline void e1000e_clear_vfta(struct e1000_hw *hw)
++{
++ hw->mac.ops.clear_vfta(hw);
++}
++extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
++extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
++ u8 *mc_addr_list,
++ u32 mc_addr_count);
++extern void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
++extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
++extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
++extern s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
++extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
++extern void e1000e_config_collision_dist(struct e1000_hw *hw);
++extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
++extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
++extern s32 e1000e_blink_led(struct e1000_hw *hw);
++extern void e1000e_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
++static inline void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
++{
++ if (hw->mac.ops.write_vfta)
++ hw->mac.ops.write_vfta(hw, offset, value);
++}
++extern void e1000e_reset_adaptive(struct e1000_hw *hw);
++extern void e1000e_update_adaptive(struct e1000_hw *hw);
++
++extern s32 e1000e_setup_copper_link(struct e1000_hw *hw);
++extern void e1000e_put_hw_semaphore(struct e1000_hw *hw);
++extern s32 e1000e_check_reset_block_generic(struct e1000_hw *hw);
++extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
++extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
++extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
++extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
++extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
++extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
++extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
++extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
++extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
++extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
++extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw);
++extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
++extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
++extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
++extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
++extern s32 e1000e_determine_phy_address(struct e1000_hw *hw);
++extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
++extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
++extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
++extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
++extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
++extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
++ u32 usec_interval, bool *success);
++extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
++extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
++extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
++extern s32 e1000e_check_downshift(struct e1000_hw *hw);
++
++static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
++{
++ if (hw->phy.ops.reset)
++ return hw->phy.ops.reset(hw);
++
++ return 0;
++}
++
++static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
++{
++ if (hw->phy.ops.check_reset_block)
++ return hw->phy.ops.check_reset_block(hw);
++
++ return 0;
++}
++
++static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data)
++{
++ if (hw->phy.ops.read_reg)
++ return hw->phy.ops.read_reg(hw, offset, data);
++
++ return 0;
++}
++
++static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data)
++{
++ if (hw->phy.ops.write_reg)
++ return hw->phy.ops.write_reg(hw, offset, data);
++
++ return 0;
++}
++
++static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
++{
++ if (hw->phy.ops.get_cable_length)
++ return hw->phy.ops.get_cable_length(hw);
++
++ return 0;
++}
++
++extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
++extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
++extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
++extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
++extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
++extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
++extern void e1000e_release_nvm(struct e1000_hw *hw);
++
++static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw)
++{
++ if (hw->mac.ops.read_mac_addr)
++ return hw->mac.ops.read_mac_addr(hw);
++
++ return e1000e_read_mac_addr_generic(hw);
++}
++
++static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
++{
++ return hw->nvm.ops.validate(hw);
++}
++
++static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
++{
++ return hw->nvm.ops.update(hw);
++}
++
++static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
++{
++ return hw->nvm.ops.read(hw, offset, words, data);
++}
++
++static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
++{
++ return hw->nvm.ops.write(hw, offset, words, data);
++}
++
++static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
++{
++ if (hw->phy.ops.get_info)
++ return hw->phy.ops.get_info(hw);
++
++ return 0;
++}
++
++extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
++extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
++
+static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
+{
+ return readl(hw->hw_addr + reg);
+{
+ writel(val, hw->hw_addr + reg);
+}
-+#define er32(reg) E1000_READ_REG(hw, E1000_##reg)
-+#define ew32(reg,val) E1000_WRITE_REG(hw, E1000_##reg, (val))
++
++#define er32(reg) __er32(hw, E1000_##reg)
++#define ew32(reg, val) __ew32(hw, E1000_##reg, (val))
+#define e1e_flush() er32(STATUS)
+
-+extern void e1000_init_function_pointers_82571(struct e1000_hw *hw);
-+extern void e1000_init_function_pointers_80003es2lan(struct e1000_hw *hw);
-+extern void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw);
++#define E1000_WRITE_REG(a, reg, value) ( \
++ writel((value), ((a)->hw_addr + reg)))
++
++#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + reg))
++
++#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
++ writel((value), ((a)->hw_addr + reg + ((offset) << 2))))
++
++#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
++ readl((a)->hw_addr + reg + ((offset) << 2)))
++
++#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
++#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
++
++static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
++{
++ return readw(hw->flash_address + reg);
++}
+
-+static inline s32 e1000_read_mac_addr(struct e1000_hw *hw)
++static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg)
+{
-+ if (hw->mac.ops.read_mac_addr)
-+ return hw->mac.ops.read_mac_addr(hw);
++ return readl(hw->flash_address + reg);
++}
+
-+ return e1000_read_mac_addr_generic(hw);
++static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val)
++{
++ writew(val, hw->flash_address + reg);
+}
+
-+static inline void e1000_power_up_phy(struct e1000_hw *hw)
++static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
+{
-+ if(hw->phy.ops.power_up)
-+ hw->phy.ops.power_up(hw);
-+ hw->mac.ops.setup_link(hw);
++ writel(val, hw->flash_address + reg);
+}
+
++#define er16flash(reg) __er16flash(hw, (reg))
++#define er32flash(reg) __er32flash(hw, (reg))
++#define ew16flash(reg, val) __ew16flash(hw, (reg), (val))
++#define ew32flash(reg, val) __ew32flash(hw, (reg), (val))
++
+#endif /* _E1000_H_ */
-diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_hw.h linux-2.6.22-10/drivers/net/e1000e/e1000_hw.h
---- linux-2.6.22-0/drivers/net/e1000e/e1000_hw.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_hw.h 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,671 @@
+diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_ich8lan.c linux-2.6.22-10/drivers/net/e1000e/e1000_ich8lan.c
+--- linux-2.6.22-0/drivers/net/e1000e/e1000_ich8lan.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_ich8lan.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,3042 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+
+*******************************************************************************/
+
-+#ifndef _E1000_HW_H_
-+#define _E1000_HW_H_
-+
-+#include "e1000_osdep.h"
-+#include "e1000_regs.h"
-+#include "e1000_defines.h"
++/*
++ * 82562G 10/100 Network Connection
++ * 82562G-2 10/100 Network Connection
++ * 82562GT 10/100 Network Connection
++ * 82562GT-2 10/100 Network Connection
++ * 82562V 10/100 Network Connection
++ * 82562V-2 10/100 Network Connection
++ * 82566DC-2 Gigabit Network Connection
++ * 82566DC Gigabit Network Connection
++ * 82566DM-2 Gigabit Network Connection
++ * 82566DM Gigabit Network Connection
++ * 82566MC Gigabit Network Connection
++ * 82566MM Gigabit Network Connection
++ * 82567LM Gigabit Network Connection
++ * 82567LF Gigabit Network Connection
++ * 82567V Gigabit Network Connection
++ * 82567LM-2 Gigabit Network Connection
++ * 82567LF-2 Gigabit Network Connection
++ * 82567V-2 Gigabit Network Connection
++ * 82567LF-3 Gigabit Network Connection
++ * 82567LM-3 Gigabit Network Connection
++ * 82567LM-4 Gigabit Network Connection
++ * 82577LM Gigabit Network Connection
++ * 82577LC Gigabit Network Connection
++ * 82578DM Gigabit Network Connection
++ * 82578DC Gigabit Network Connection
++ */
+
-+struct e1000_hw;
++#include "e1000.h"
+
-+#define E1000_DEV_ID_82571EB_COPPER 0x105E
-+#define E1000_DEV_ID_82571EB_FIBER 0x105F
-+#define E1000_DEV_ID_82571EB_SERDES 0x1060
-+#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
-+#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
-+#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
-+#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
-+#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
-+#define E1000_DEV_ID_82571EB_QUAD_COPPER_LP 0x10BC
-+#define E1000_DEV_ID_82572EI_COPPER 0x107D
-+#define E1000_DEV_ID_82572EI_FIBER 0x107E
-+#define E1000_DEV_ID_82572EI_SERDES 0x107F
-+#define E1000_DEV_ID_82572EI 0x10B9
-+#define E1000_DEV_ID_82573E 0x108B
-+#define E1000_DEV_ID_82573E_IAMT 0x108C
-+#define E1000_DEV_ID_82573L 0x109A
-+#define E1000_DEV_ID_82574L 0x10D3
-+#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
-+#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
-+#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA
-+#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB
-+#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049
-+#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A
-+#define E1000_DEV_ID_ICH8_IGP_C 0x104B
-+#define E1000_DEV_ID_ICH8_IFE 0x104C
-+#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4
-+#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
-+#define E1000_DEV_ID_ICH8_IGP_M 0x104D
-+#define E1000_DEV_ID_ICH9_IGP_M 0x10BF
-+#define E1000_DEV_ID_ICH9_IGP_M_AMT 0x10F5
-+#define E1000_DEV_ID_ICH9_IGP_M_V 0x10CB
-+#define E1000_DEV_ID_ICH9_IGP_AMT 0x10BD
-+#define E1000_DEV_ID_ICH9_BM 0x10E5
-+#define E1000_DEV_ID_ICH9_IGP_C 0x294C
-+#define E1000_DEV_ID_ICH9_IFE 0x10C0
-+#define E1000_DEV_ID_ICH9_IFE_GT 0x10C3
-+#define E1000_DEV_ID_ICH9_IFE_G 0x10C2
-+#define E1000_DEV_ID_ICH10_R_BM_LM 0x10CC
-+#define E1000_DEV_ID_ICH10_R_BM_LF 0x10CD
-+#define E1000_DEV_ID_ICH10_R_BM_V 0x10CE
-+#define E1000_DEV_ID_ICH10_D_BM_LM 0x10DE
-+#define E1000_DEV_ID_ICH10_D_BM_LF 0x10DF
++static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw);
++static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw);
++static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw);
++static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw);
++static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw);
++static void e1000_release_swflag_ich8lan(struct e1000_hw *hw);
++static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
++static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw);
++static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw);
++static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw);
++static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw,
++ bool active);
++static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw,
++ bool active);
++static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset,
++ u16 words, u16 *data);
++static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset,
++ u16 words, u16 *data);
++static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw);
++static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw);
++static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw,
++ u16 *data);
++static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
++static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw);
++static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw);
++static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw);
++static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
++static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
++static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw,
++ u16 *speed, u16 *duplex);
++static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
++static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
++static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
++static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
++static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
++static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
++static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
++static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
++static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
++static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout);
++static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw);
++static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw);
++static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
++static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
++static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw,
++ u32 offset, u8 *data);
++static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
++ u8 size, u16 *data);
++static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw,
++ u32 offset, u16 *data);
++static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
++ u32 offset, u8 byte);
++static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw,
++ u32 offset, u8 data);
++static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
++ u8 size, u16 data);
++static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
++static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
++static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw);
+
-+#define E1000_REVISION_0 0
-+#define E1000_REVISION_1 1
-+#define E1000_REVISION_2 2
-+#define E1000_REVISION_3 3
-+#define E1000_REVISION_4 4
++/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
++/* Offset 04h HSFSTS */
++union ich8_hws_flash_status {
++ struct ich8_hsfsts {
++ u16 flcdone :1; /* bit 0 Flash Cycle Done */
++ u16 flcerr :1; /* bit 1 Flash Cycle Error */
++ u16 dael :1; /* bit 2 Direct Access error Log */
++ u16 berasesz :2; /* bit 4:3 Sector Erase Size */
++ u16 flcinprog :1; /* bit 5 flash cycle in Progress */
++ u16 reserved1 :2; /* bit 13:6 Reserved */
++ u16 reserved2 :6; /* bit 13:6 Reserved */
++ u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
++ u16 flockdn :1; /* bit 15 Flash Config Lock-Down */
++ } hsf_status;
++ u16 regval;
++};
+
-+#define E1000_FUNC_0 0
-+#define E1000_FUNC_1 1
++/* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */
++/* Offset 06h FLCTL */
++union ich8_hws_flash_ctrl {
++ struct ich8_hsflctl {
++ u16 flcgo :1; /* 0 Flash Cycle Go */
++ u16 flcycle :2; /* 2:1 Flash Cycle */
++ u16 reserved :5; /* 7:3 Reserved */
++ u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
++ u16 flockdn :6; /* 15:10 Reserved */
++ } hsf_ctrl;
++ u16 regval;
++};
+
-+typedef enum {
-+ e1000_undefined = 0,
-+ e1000_82571,
-+ e1000_82572,
-+ e1000_82573,
-+ e1000_82574,
-+ e1000_80003es2lan,
-+ e1000_ich8lan,
-+ e1000_ich9lan,
-+ e1000_ich10lan,
-+ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
-+} e1000_mac_type;
++/* ICH Flash Region Access Permissions */
++union ich8_hws_flash_regacc {
++ struct ich8_flracc {
++ u32 grra :8; /* 0:7 GbE region Read Access */
++ u32 grwa :8; /* 8:15 GbE region Write Access */
++ u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
++ u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
++ } hsf_flregacc;
++ u16 regval;
++};
+
-+typedef enum {
-+ e1000_media_type_unknown = 0,
-+ e1000_media_type_copper = 1,
-+ e1000_media_type_fiber = 2,
-+ e1000_media_type_internal_serdes = 3,
-+ e1000_num_media_types
-+} e1000_media_type;
++/**
++ * e1000_init_phy_params_pchlan - Initialize PHY function pointers
++ * @hw: pointer to the HW structure
++ *
++ * Initialize family-specific PHY parameters and function pointers.
++ **/
++static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
++{
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val = E1000_SUCCESS;
+
-+typedef enum {
-+ e1000_nvm_unknown = 0,
-+ e1000_nvm_none,
-+ e1000_nvm_eeprom_spi,
-+ e1000_nvm_eeprom_microwire,
-+ e1000_nvm_flash_hw,
-+ e1000_nvm_flash_sw
-+} e1000_nvm_type;
++ phy->addr = 1;
++ phy->reset_delay_us = 100;
+
-+typedef enum {
-+ e1000_nvm_override_none = 0,
-+ e1000_nvm_override_spi_small,
-+ e1000_nvm_override_spi_large,
-+ e1000_nvm_override_microwire_small,
-+ e1000_nvm_override_microwire_large
-+} e1000_nvm_override;
++ phy->ops.acquire = e1000_acquire_swflag_ich8lan;
++ phy->ops.check_polarity = e1000_check_polarity_ife;
++ phy->ops.check_reset_block = e1000_check_reset_block_ich8lan;
++ phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
++ phy->ops.get_cable_length = e1000e_get_cable_length_igp_2;
++ phy->ops.get_cfg_done = e1000_get_cfg_done_ich8lan;
++ phy->ops.get_info = e1000_get_phy_info_ich8lan;
++ phy->ops.read_reg = e1000_read_phy_reg_hv;
++ phy->ops.release = e1000_release_swflag_ich8lan;
++ phy->ops.reset = e1000_phy_hw_reset_ich8lan;
++ phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan;
++ phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan;
++ phy->ops.write_reg = e1000_write_phy_reg_hv;
++ phy->ops.power_up = e1000_power_up_phy_copper;
++ phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
++ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
-+typedef enum {
-+ e1000_phy_unknown = 0,
-+ e1000_phy_none,
-+ e1000_phy_m88,
-+ e1000_phy_igp,
-+ e1000_phy_igp_2,
-+ e1000_phy_gg82563,
-+ e1000_phy_igp_3,
-+ e1000_phy_ife,
-+ e1000_phy_bm,
-+} e1000_phy_type;
++ phy->id = e1000_phy_unknown;
++ e1000e_get_phy_id(hw);
++ phy->type = e1000e_get_phy_type_from_id(phy->id);
+
-+typedef enum {
-+ e1000_bus_type_unknown = 0,
-+ e1000_bus_type_pci,
-+ e1000_bus_type_pcix,
-+ e1000_bus_type_pci_express,
-+ e1000_bus_type_reserved
-+} e1000_bus_type;
++ if (phy->type == e1000_phy_82577) {
++ phy->ops.check_polarity = e1000_check_polarity_82577;
++ phy->ops.force_speed_duplex =
++ e1000_phy_force_speed_duplex_82577;
++ phy->ops.get_cable_length = e1000_get_cable_length_82577;
++ phy->ops.get_info = e1000_get_phy_info_82577;
++ phy->ops.commit = e1000e_phy_sw_reset;
++ }
+
-+typedef enum {
-+ e1000_bus_speed_unknown = 0,
-+ e1000_bus_speed_33,
-+ e1000_bus_speed_66,
-+ e1000_bus_speed_100,
-+ e1000_bus_speed_120,
-+ e1000_bus_speed_133,
-+ e1000_bus_speed_2500,
-+ e1000_bus_speed_5000,
-+ e1000_bus_speed_reserved
-+} e1000_bus_speed;
++ return ret_val;
++}
+
-+typedef enum {
-+ e1000_bus_width_unknown = 0,
-+ e1000_bus_width_pcie_x1,
-+ e1000_bus_width_pcie_x2,
-+ e1000_bus_width_pcie_x4 = 4,
-+ e1000_bus_width_pcie_x8 = 8,
-+ e1000_bus_width_32,
-+ e1000_bus_width_64,
-+ e1000_bus_width_reserved
-+} e1000_bus_width;
++/**
++ * e1000_init_phy_params_ich8lan - Initialize PHY function pointers
++ * @hw: pointer to the HW structure
++ *
++ * Initialize family-specific PHY parameters and function pointers.
++ **/
++static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
++{
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val = E1000_SUCCESS;
++ u16 i = 0;
+
-+typedef enum {
-+ e1000_1000t_rx_status_not_ok = 0,
-+ e1000_1000t_rx_status_ok,
-+ e1000_1000t_rx_status_undefined = 0xFF
-+} e1000_1000t_rx_status;
++ phy->addr = 1;
++ phy->reset_delay_us = 100;
+
-+typedef enum {
-+ e1000_rev_polarity_normal = 0,
-+ e1000_rev_polarity_reversed,
-+ e1000_rev_polarity_undefined = 0xFF
-+} e1000_rev_polarity;
++ phy->ops.acquire = e1000_acquire_swflag_ich8lan;
++ phy->ops.check_polarity = e1000_check_polarity_ife;
++ phy->ops.check_reset_block = e1000_check_reset_block_ich8lan;
++ phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
++ phy->ops.get_cable_length = e1000e_get_cable_length_igp_2;
++ phy->ops.get_cfg_done = e1000_get_cfg_done_ich8lan;
++ phy->ops.get_info = e1000_get_phy_info_ich8lan;
++ phy->ops.read_reg = e1000e_read_phy_reg_igp;
++ phy->ops.release = e1000_release_swflag_ich8lan;
++ phy->ops.reset = e1000_phy_hw_reset_ich8lan;
++ phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan;
++ phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan;
++ phy->ops.write_reg = e1000e_write_phy_reg_igp;
++ phy->ops.power_up = e1000_power_up_phy_copper;
++ phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
+
-+typedef enum {
-+ e1000_fc_none = 0,
-+ e1000_fc_rx_pause,
-+ e1000_fc_tx_pause,
-+ e1000_fc_full,
-+ e1000_fc_default = 0xFF
-+} e1000_fc_type;
++ /*
++ * We may need to do this twice - once for IGP and if that fails,
++ * we'll set BM func pointers and try again
++ */
++ ret_val = e1000e_determine_phy_address(hw);
++ if (ret_val) {
++ phy->ops.write_reg = e1000e_write_phy_reg_bm;
++ phy->ops.read_reg = e1000e_read_phy_reg_bm;
++ ret_val = e1000e_determine_phy_address(hw);
++ if (ret_val) {
++ e_dbg("Cannot determine PHY addr. Erroring out\n");
++ goto out;
++ }
++ }
+
++ phy->id = 0;
++ while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
++ (i++ < 100)) {
++ msleep(1);
++ ret_val = e1000e_get_phy_id(hw);
++ if (ret_val)
++ goto out;
++ }
+
-+/* Receive Descriptor */
-+struct e1000_rx_desc {
-+ u64 buffer_addr; /* Address of the descriptor's data buffer */
-+ u16 length; /* Length of data DMAed into data buffer */
-+ u16 csum; /* Packet checksum */
-+ u8 status; /* Descriptor status */
-+ u8 errors; /* Descriptor Errors */
-+ u16 special;
-+};
++ /* Verify phy id */
++ switch (phy->id) {
++ case IGP03E1000_E_PHY_ID:
++ phy->type = e1000_phy_igp_3;
++ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
++ break;
++ case IFE_E_PHY_ID:
++ case IFE_PLUS_E_PHY_ID:
++ case IFE_C_E_PHY_ID:
++ phy->type = e1000_phy_ife;
++ phy->autoneg_mask = E1000_ALL_NOT_GIG;
++ break;
++ case BME1000_E_PHY_ID:
++ phy->type = e1000_phy_bm;
++ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
++ phy->ops.read_reg = e1000e_read_phy_reg_bm;
++ phy->ops.write_reg = e1000e_write_phy_reg_bm;
++ phy->ops.commit = e1000e_phy_sw_reset;
++ break;
++ default:
++ ret_val = -E1000_ERR_PHY;
++ goto out;
++ }
+
-+/* Receive Descriptor - Extended */
-+union e1000_rx_desc_extended {
-+ struct {
-+ u64 buffer_addr;
-+ u64 reserved;
-+ } read;
-+ struct {
-+ struct {
-+ u32 mrq; /* Multiple Rx Queues */
-+ union {
-+ u32 rss; /* RSS Hash */
-+ struct {
-+ u16 ip_id; /* IP id */
-+ u16 csum; /* Packet Checksum */
-+ } csum_ip;
-+ } hi_dword;
-+ } lower;
-+ struct {
-+ u32 status_error; /* ext status/error */
-+ u16 length;
-+ u16 vlan; /* VLAN tag */
-+ } upper;
-+ } wb; /* writeback */
-+};
-+
-+#define MAX_PS_BUFFERS 4
-+/* Receive Descriptor - Packet Split */
-+union e1000_rx_desc_packet_split {
-+ struct {
-+ /* one buffer for protocol header(s), three data buffers */
-+ u64 buffer_addr[MAX_PS_BUFFERS];
-+ } read;
-+ struct {
-+ struct {
-+ u32 mrq; /* Multiple Rx Queues */
-+ union {
-+ u32 rss; /* RSS Hash */
-+ struct {
-+ u16 ip_id; /* IP id */
-+ u16 csum; /* Packet Checksum */
-+ } csum_ip;
-+ } hi_dword;
-+ } lower;
-+ struct {
-+ u32 status_error; /* ext status/error */
-+ u16 length0; /* length of buffer 0 */
-+ u16 vlan; /* VLAN tag */
-+ } middle;
-+ struct {
-+ u16 header_status;
-+ u16 length[3]; /* length of buffers 1-3 */
-+ } upper;
-+ u64 reserved;
-+ } wb; /* writeback */
-+};
++out:
++ return ret_val;
++}
+
-+/* Transmit Descriptor */
-+struct e1000_tx_desc {
-+ u64 buffer_addr; /* Address of the descriptor's data buffer */
-+ union {
-+ u32 data;
-+ struct {
-+ u16 length; /* Data buffer length */
-+ u8 cso; /* Checksum offset */
-+ u8 cmd; /* Descriptor control */
-+ } flags;
-+ } lower;
-+ union {
-+ u32 data;
-+ struct {
-+ u8 status; /* Descriptor status */
-+ u8 css; /* Checksum start */
-+ u16 special;
-+ } fields;
-+ } upper;
-+};
++/**
++ * e1000_init_nvm_params_ich8lan - Initialize NVM function pointers
++ * @hw: pointer to the HW structure
++ *
++ * Initialize family-specific NVM parameters and function
++ * pointers.
++ **/
++static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
++{
++ struct e1000_nvm_info *nvm = &hw->nvm;
++ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
++ union ich8_hws_flash_status hsfsts;
++ u32 gfpreg, sector_base_addr, sector_end_addr;
++ s32 ret_val = E1000_SUCCESS;
++ u16 i;
+
-+/* Offload Context Descriptor */
-+struct e1000_context_desc {
-+ union {
-+ u32 ip_config;
-+ struct {
-+ u8 ipcss; /* IP checksum start */
-+ u8 ipcso; /* IP checksum offset */
-+ u16 ipcse; /* IP checksum end */
-+ } ip_fields;
-+ } lower_setup;
-+ union {
-+ u32 tcp_config;
-+ struct {
-+ u8 tucss; /* TCP checksum start */
-+ u8 tucso; /* TCP checksum offset */
-+ u16 tucse; /* TCP checksum end */
-+ } tcp_fields;
-+ } upper_setup;
-+ u32 cmd_and_length;
-+ union {
-+ u32 data;
-+ struct {
-+ u8 status; /* Descriptor status */
-+ u8 hdr_len; /* Header length */
-+ u16 mss; /* Maximum segment size */
-+ } fields;
-+ } tcp_seg_setup;
-+};
++ /* Can't read flash registers if the register set isn't mapped. */
++ if (!hw->flash_address) {
++ e_dbg("ERROR: Flash registers not mapped\n");
++ ret_val = -E1000_ERR_CONFIG;
++ goto out;
++ }
+
-+/* Offload data descriptor */
-+struct e1000_data_desc {
-+ u64 buffer_addr; /* Address of the descriptor's buffer address */
-+ union {
-+ u32 data;
-+ struct {
-+ u16 length; /* Data buffer length */
-+ u8 typ_len_ext;
-+ u8 cmd;
-+ } flags;
-+ } lower;
-+ union {
-+ u32 data;
-+ struct {
-+ u8 status; /* Descriptor status */
-+ u8 popts; /* Packet Options */
-+ u16 special;
-+ } fields;
-+ } upper;
-+};
++ nvm->type = e1000_nvm_flash_sw;
+
-+/* Statistics counters collected by the MAC */
-+struct e1000_hw_stats {
-+ u64 crcerrs;
-+ u64 algnerrc;
-+ u64 symerrs;
-+ u64 rxerrc;
-+ u64 mpc;
-+ u64 scc;
-+ u64 ecol;
-+ u64 mcc;
-+ u64 latecol;
-+ u64 colc;
-+ u64 dc;
-+ u64 tncrs;
-+ u64 sec;
-+ u64 cexterr;
-+ u64 rlec;
-+ u64 xonrxc;
-+ u64 xontxc;
-+ u64 xoffrxc;
-+ u64 xofftxc;
-+ u64 fcruc;
-+ u64 prc64;
-+ u64 prc127;
-+ u64 prc255;
-+ u64 prc511;
-+ u64 prc1023;
-+ u64 prc1522;
-+ u64 gprc;
-+ u64 bprc;
-+ u64 mprc;
-+ u64 gptc;
-+ u64 gorc;
-+ u64 gotc;
-+ u64 rnbc;
-+ u64 ruc;
-+ u64 rfc;
-+ u64 roc;
-+ u64 rjc;
-+ u64 mgprc;
-+ u64 mgpdc;
-+ u64 mgptc;
-+ u64 tor;
-+ u64 tot;
-+ u64 tpr;
-+ u64 tpt;
-+ u64 ptc64;
-+ u64 ptc127;
-+ u64 ptc255;
-+ u64 ptc511;
-+ u64 ptc1023;
-+ u64 ptc1522;
-+ u64 mptc;
-+ u64 bptc;
-+ u64 tsctc;
-+ u64 tsctfc;
-+ u64 iac;
-+ u64 icrxptc;
-+ u64 icrxatc;
-+ u64 ictxptc;
-+ u64 ictxatc;
-+ u64 ictxqec;
-+ u64 ictxqmtc;
-+ u64 icrxdmtc;
-+ u64 icrxoc;
-+ u64 cbtmpc;
-+ u64 htdpmc;
-+ u64 cbrdpc;
-+ u64 cbrmpc;
-+ u64 rpthc;
-+ u64 hgptc;
-+ u64 htcbdpc;
-+ u64 hgorc;
-+ u64 hgotc;
-+ u64 lenerrs;
-+ u64 scvpc;
-+ u64 hrmpc;
-+};
++ gfpreg = er32flash(ICH_FLASH_GFPREG);
+
-+struct e1000_phy_stats {
-+ u32 idle_errors;
-+ u32 receive_errors;
-+};
++ /*
++ * sector_X_addr is a "sector"-aligned address (4096 bytes)
++ * Add 1 to sector_end_addr since this sector is included in
++ * the overall size.
++ */
++ sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
++ sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
+
-+struct e1000_host_mng_dhcp_cookie {
-+ u32 signature;
-+ u8 status;
-+ u8 reserved0;
-+ u16 vlan_id;
-+ u32 reserved1;
-+ u16 reserved2;
-+ u8 reserved3;
-+ u8 checksum;
-+};
++ /* flash_base_addr is byte-aligned */
++ nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT;
+
-+/* Host Interface "Rev 1" */
-+struct e1000_host_command_header {
-+ u8 command_id;
-+ u8 command_length;
-+ u8 command_options;
-+ u8 checksum;
-+};
++ /*
++ * find total size of the NVM, then cut in half since the total
++ * size represents two separate NVM banks.
++ */
++ nvm->flash_bank_size = (sector_end_addr - sector_base_addr)
++ << FLASH_SECTOR_ADDR_SHIFT;
++ nvm->flash_bank_size /= 2;
++ /* Adjust to word count */
++ nvm->flash_bank_size /= sizeof(u16);
+
-+#define E1000_HI_MAX_DATA_LENGTH 252
-+struct e1000_host_command_info {
-+ struct e1000_host_command_header command_header;
-+ u8 command_data[E1000_HI_MAX_DATA_LENGTH];
-+};
++ /*
++ * Make sure the flash bank size does not overwrite the 4k
++ * sector ranges. We may have 64k allotted to us but we only care
++ * about the first 2 4k sectors. Therefore, if we have anything less
++ * than 64k set in the HSFSTS register, we will reduce the bank size
++ * down to 4k and let the rest remain unused. If berasesz == 3, then
++ * we are working in 64k mode. Otherwise we are not.
++ */
++ if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) {
++ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
++ if (hsfsts.hsf_status.berasesz != 3)
++ nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS;
++ }
+
-+/* Host Interface "Rev 2" */
-+struct e1000_host_mng_command_header {
-+ u8 command_id;
-+ u8 checksum;
-+ u16 reserved1;
-+ u16 reserved2;
-+ u16 command_length;
-+};
++ nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
+
-+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
-+struct e1000_host_mng_command_info {
-+ struct e1000_host_mng_command_header command_header;
-+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
-+};
++ /* Clear shadow ram */
++ for (i = 0; i < nvm->word_size; i++) {
++ dev_spec->shadow_ram[i].modified = false;
++ dev_spec->shadow_ram[i].value = 0xFFFF;
++ }
+
-+#include "e1000_mac.h"
-+#include "e1000_phy.h"
-+#include "e1000_nvm.h"
-+#include "e1000_manage.h"
++ /* Function Pointers */
++ nvm->ops.acquire = e1000_acquire_swflag_ich8lan;
++ nvm->ops.read = e1000_read_nvm_ich8lan;
++ nvm->ops.release = e1000_release_swflag_ich8lan;
++ nvm->ops.update = e1000_update_nvm_checksum_ich8lan;
++ nvm->ops.valid_led_default = e1000_valid_led_default_ich8lan;
++ nvm->ops.validate = e1000_validate_nvm_checksum_ich8lan;
++ nvm->ops.write = e1000_write_nvm_ich8lan;
+
-+struct e1000_mac_operations {
-+ /* Function pointers for the MAC. */
-+ s32 (*init_params)(struct e1000_hw *);
-+ s32 (*blink_led)(struct e1000_hw *);
-+ s32 (*check_for_link)(struct e1000_hw *);
-+ bool (*check_mng_mode)(struct e1000_hw *hw);
-+ s32 (*cleanup_led)(struct e1000_hw *);
-+ void (*clear_hw_cntrs)(struct e1000_hw *);
-+ void (*clear_vfta)(struct e1000_hw *);
-+ s32 (*get_bus_info)(struct e1000_hw *);
-+ s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
-+ s32 (*led_on)(struct e1000_hw *);
-+ s32 (*led_off)(struct e1000_hw *);
-+ void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32, u32,
-+ u32);
-+ void (*remove_device)(struct e1000_hw *);
-+ s32 (*reset_hw)(struct e1000_hw *);
-+ s32 (*init_hw)(struct e1000_hw *);
-+ s32 (*setup_link)(struct e1000_hw *);
-+ s32 (*setup_physical_interface)(struct e1000_hw *);
-+ s32 (*setup_led)(struct e1000_hw *);
-+ void (*write_vfta)(struct e1000_hw *, u32, u32);
-+ void (*mta_set)(struct e1000_hw *, u32);
-+ void (*config_collision_dist)(struct e1000_hw*);
-+ void (*rar_set)(struct e1000_hw*, u8*, u32);
-+ s32 (*read_mac_addr)(struct e1000_hw*);
-+ s32 (*validate_mdi_setting)(struct e1000_hw*);
-+ s32 (*mng_host_if_write)(struct e1000_hw*, u8*, u16, u16, u8*);
-+ s32 (*mng_write_cmd_header)(struct e1000_hw *hw,
-+ struct e1000_host_mng_command_header*);
-+ s32 (*mng_enable_host_if)(struct e1000_hw*);
-+ s32 (*wait_autoneg)(struct e1000_hw*);
-+};
++out:
++ return ret_val;
++}
+
-+struct e1000_phy_operations {
-+ s32 (*init_params)(struct e1000_hw *);
-+ s32 (*acquire)(struct e1000_hw *);
-+ s32 (*cfg_on_link_up)(struct e1000_hw *);
-+ s32 (*check_polarity)(struct e1000_hw *);
-+ s32 (*check_reset_block)(struct e1000_hw *);
-+ s32 (*commit)(struct e1000_hw *);
-+ s32 (*force_speed_duplex)(struct e1000_hw *);
-+ s32 (*get_cfg_done)(struct e1000_hw *hw);
-+ s32 (*get_cable_length)(struct e1000_hw *);
-+ s32 (*get_info)(struct e1000_hw *);
-+ s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
-+ void (*release)(struct e1000_hw *);
-+ s32 (*reset)(struct e1000_hw *);
-+ s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
-+ s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
-+ s32 (*write_reg)(struct e1000_hw *, u32, u16);
-+ void (*power_up)(struct e1000_hw *);
-+ void (*power_down)(struct e1000_hw *);
-+};
++/**
++ * e1000_init_mac_params_ich8lan - Initialize MAC function pointers
++ * @hw: pointer to the HW structure
++ *
++ * Initialize family-specific MAC parameters and function
++ * pointers.
++ **/
++static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
++{
++ struct e1000_mac_info *mac = &hw->mac;
+
-+struct e1000_nvm_operations {
-+ s32 (*init_params)(struct e1000_hw *);
-+ s32 (*acquire)(struct e1000_hw *);
-+ s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
-+ void (*release)(struct e1000_hw *);
-+ void (*reload)(struct e1000_hw *);
-+ s32 (*update)(struct e1000_hw *);
-+ s32 (*valid_led_default)(struct e1000_hw *, u16 *);
-+ s32 (*validate)(struct e1000_hw *);
-+ s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
-+};
++ /* Set media type function pointer */
++ hw->phy.media_type = e1000_media_type_copper;
+
-+struct e1000_mac_info {
-+ struct e1000_mac_operations ops;
-+ u8 addr[6];
-+ u8 perm_addr[6];
++ /* Set mta register count */
++ mac->mta_reg_count = 32;
++ /* Set rar entry count */
++ mac->rar_entry_count = E1000_ICH_RAR_ENTRIES;
++ if (mac->type == e1000_ich8lan)
++ mac->rar_entry_count--;
++ /* Set if part includes ASF firmware */
++ mac->asf_firmware_present = true;
++ /* Set if manageability features are enabled. */
++ mac->arc_subsystem_valid = true;
+
-+ e1000_mac_type type;
++ /* Function pointers */
+
-+ u32 collision_delta;
-+ u32 ledctl_default;
-+ u32 ledctl_mode1;
-+ u32 ledctl_mode2;
-+ u32 mc_filter_type;
-+ u32 tx_packet_delta;
-+ u32 txcw;
++ /* bus type/speed/width */
++ mac->ops.get_bus_info = e1000_get_bus_info_ich8lan;
++ /* function id */
++ mac->ops.set_lan_id = e1000_set_lan_id_single_port;
++ /* reset */
++ mac->ops.reset_hw = e1000_reset_hw_ich8lan;
++ /* hw initialization */
++ mac->ops.init_hw = e1000_init_hw_ich8lan;
++ /* link setup */
++ mac->ops.setup_link = e1000_setup_link_ich8lan;
++ /* physical interface setup */
++ mac->ops.setup_physical_interface = e1000_setup_copper_link_ich8lan;
++ /* check for link */
++ mac->ops.check_for_link = e1000_check_for_copper_link_ich8lan;
++ /* check management mode */
++ mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
++ /* link info */
++ mac->ops.get_link_up_info = e1000_get_link_up_info_ich8lan;
++ /* multicast address update */
++ mac->ops.update_mc_addr_list = e1000e_update_mc_addr_list_generic;
++ /* setting MTA */
++ mac->ops.mta_set = e1000_mta_set_generic;
++ /* clear hardware counters */
++ mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan;
+
-+ u16 current_ifs_val;
-+ u16 ifs_max_val;
-+ u16 ifs_min_val;
-+ u16 ifs_ratio;
-+ u16 ifs_step_size;
-+ u16 mta_reg_count;
-+ u16 rar_entry_count;
++ /* LED operations */
++ switch (mac->type) {
++ case e1000_ich8lan:
++ case e1000_ich9lan:
++ case e1000_ich10lan:
++ /* ID LED init */
++ mac->ops.id_led_init = e1000e_id_led_init;
++ /* blink LED */
++ mac->ops.blink_led = e1000e_blink_led;
++ /* setup LED */
++ mac->ops.setup_led = e1000_setup_led_generic;
++ /* cleanup LED */
++ mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
++ /* turn on/off LED */
++ mac->ops.led_on = e1000_led_on_ich8lan;
++ mac->ops.led_off = e1000_led_off_ich8lan;
++ break;
++ case e1000_pchlan:
++ /* ID LED init */
++ mac->ops.id_led_init = e1000_id_led_init_pchlan;
++ /* setup LED */
++ mac->ops.setup_led = e1000_setup_led_pchlan;
++ /* cleanup LED */
++ mac->ops.cleanup_led = e1000_cleanup_led_pchlan;
++ /* turn on/off LED */
++ mac->ops.led_on = e1000_led_on_pchlan;
++ mac->ops.led_off = e1000_led_off_pchlan;
++ break;
++ default:
++ break;
++ }
+
-+ u8 forced_speed_duplex;
++ /* Enable PCS Lock-loss workaround for ICH8 */
++ if (mac->type == e1000_ich8lan)
++ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
+
-+ bool adaptive_ifs;
-+ bool arc_subsystem_valid;
-+ bool asf_firmware_present;
-+ bool autoneg;
-+ bool autoneg_failed;
-+ bool disable_av;
-+ bool disable_hw_init_bits;
-+ bool get_link_status;
-+ bool ifs_params_forced;
-+ bool in_ifs_mode;
-+ bool report_tx_early;
-+ bool serdes_has_link;
-+ bool tx_pkt_filtering;
-+};
+
-+struct e1000_phy_info {
-+ struct e1000_phy_operations ops;
-+ e1000_phy_type type;
++ return E1000_SUCCESS;
++}
+
-+ e1000_1000t_rx_status local_rx;
-+ e1000_1000t_rx_status remote_rx;
-+ e1000_ms_type ms_type;
-+ e1000_ms_type original_ms_type;
-+ e1000_rev_polarity cable_polarity;
-+ e1000_smart_speed smart_speed;
++/**
++ * e1000_check_for_copper_link_ich8lan - Check for link (Copper)
++ * @hw: pointer to the HW structure
++ *
++ * Checks to see of the link status of the hardware has changed. If a
++ * change in link status has been detected, then we read the PHY registers
++ * to get the current speed/duplex if link exists.
++ **/
++static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
++{
++ struct e1000_mac_info *mac = &hw->mac;
++ s32 ret_val;
++ bool link;
+
-+ u32 addr;
-+ u32 id;
-+ u32 reset_delay_us; /* in usec */
-+ u32 revision;
++ /*
++ * We only want to go out to the PHY registers to see if Auto-Neg
++ * has completed and/or if our link status has changed. The
++ * get_link_status flag is set upon receiving a Link Status
++ * Change or Rx Sequence Error interrupt.
++ */
++ if (!mac->get_link_status) {
++ ret_val = E1000_SUCCESS;
++ goto out;
++ }
+
-+ e1000_media_type media_type;
++ if (hw->mac.type == e1000_pchlan) {
++ ret_val = e1000e_write_kmrn_reg(hw,
++ E1000_KMRNCTRLSTA_K1_CONFIG,
++ E1000_KMRNCTRLSTA_K1_ENABLE);
++ if (ret_val)
++ goto out;
++ }
+
-+ u16 autoneg_advertised;
-+ u16 autoneg_mask;
-+ u16 cable_length;
-+ u16 max_cable_length;
-+ u16 min_cable_length;
++ /*
++ * First we want to see if the MII Status Register reports
++ * link. If so, then we want to get the current speed/duplex
++ * of the PHY.
++ */
++ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
++ if (ret_val)
++ goto out;
+
-+ u8 mdix;
++ if (!link)
++ goto out; /* No link detected */
+
-+ bool disable_polarity_correction;
-+ bool is_mdix;
-+ bool polarity_correction;
-+ bool reset_disable;
-+ bool speed_downgraded;
-+ bool autoneg_wait_to_complete;
-+};
++ mac->get_link_status = false;
+
-+struct e1000_nvm_info {
-+ struct e1000_nvm_operations ops;
-+ e1000_nvm_type type;
-+ e1000_nvm_override override;
++ if (hw->phy.type == e1000_phy_82578) {
++ ret_val = e1000_link_stall_workaround_hv(hw);
++ if (ret_val)
++ goto out;
++ }
+
-+ u32 flash_bank_size;
-+ u32 flash_base_addr;
-+ u32 semaphore_delay;
++ /*
++ * Check if there was DownShift, must be checked
++ * immediately after link-up
++ */
++ e1000e_check_downshift(hw);
+
-+ u16 word_size;
-+ u16 delay_usec;
-+ u16 address_bits;
-+ u16 opcode_bits;
-+ u16 page_size;
-+};
++ /*
++ * If we are forcing speed/duplex, then we simply return since
++ * we have already determined whether we have link or not.
++ */
++ if (!mac->autoneg) {
++ ret_val = -E1000_ERR_CONFIG;
++ goto out;
++ }
+
-+struct e1000_bus_info {
-+ e1000_bus_type type;
-+ e1000_bus_speed speed;
-+ e1000_bus_width width;
++ /*
++ * Auto-Neg is enabled. Auto Speed Detection takes care
++ * of MAC speed/duplex configuration. So we only need to
++ * configure Collision Distance in the MAC.
++ */
++ e1000e_config_collision_dist(hw);
+
-+ u32 snoop;
++ /*
++ * Configure Flow Control now that Auto-Neg has completed.
++ * First, we need to restore the desired flow control
++ * settings because we may have had to re-autoneg with a
++ * different link partner.
++ */
++ ret_val = e1000e_config_fc_after_link_up(hw);
++ if (ret_val)
++ e_dbg("Error configuring flow control\n");
+
-+ u16 func;
-+ u16 pci_cmd_word;
-+};
++out:
++ return ret_val;
++}
+
-+struct e1000_fc_info {
-+ u32 high_water; /* Flow control high-water mark */
-+ u32 low_water; /* Flow control low-water mark */
-+ u16 pause_time; /* Flow control pause timer */
-+ bool send_xon; /* Flow control send XON */
-+ bool strict_ieee; /* Strict IEEE mode */
-+ e1000_fc_type type; /* Type of flow control */
-+ e1000_fc_type original_type;
-+};
++/**
++ * e1000_init_function_pointers_ich8lan - Initialize ICH8 function pointers
++ * @hw: pointer to the HW structure
++ *
++ * Initialize family-specific function pointers for PHY, MAC, and NVM.
++ **/
++void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw)
++{
++ e1000_init_mac_ops_generic(hw);
++ e1000_init_nvm_ops_generic(hw);
++ hw->mac.ops.init_params = e1000_init_mac_params_ich8lan;
++ hw->nvm.ops.init_params = e1000_init_nvm_params_ich8lan;
++ switch (hw->mac.type) {
++ case e1000_ich8lan:
++ case e1000_ich9lan:
++ case e1000_ich10lan:
++ hw->phy.ops.init_params = e1000_init_phy_params_ich8lan;
++ break;
++ case e1000_pchlan:
++ hw->phy.ops.init_params = e1000_init_phy_params_pchlan;
++ break;
++ default:
++ break;
++ }
++}
+
-+struct e1000_hw {
-+ void *back;
-+ void *dev_spec;
++static DEFINE_MUTEX(nvm_mutex);
+
-+ u8 __iomem *hw_addr;
-+ u8 __iomem *flash_address;
-+ unsigned long io_base;
++/**
++ * e1000_acquire_swflag_ich8lan - Acquire software control flag
++ * @hw: pointer to the HW structure
++ *
++ * Acquires the software control flag for performing NVM and PHY
++ * operations. This is a function pointer entry point only called by
++ * read/write routines for the PHY and NVM parts.
++ **/
++static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
++{
++ u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
++ s32 ret_val = E1000_SUCCESS;
+
-+ struct e1000_mac_info mac;
-+ struct e1000_fc_info fc;
-+ struct e1000_phy_info phy;
-+ struct e1000_nvm_info nvm;
-+ struct e1000_bus_info bus;
-+ struct e1000_host_mng_dhcp_cookie mng_cookie;
++ might_sleep();
+
-+ u32 dev_spec_size;
++ mutex_lock(&nvm_mutex);
+
-+ u16 device_id;
-+ u16 subsystem_vendor_id;
-+ u16 subsystem_device_id;
-+ u16 vendor_id;
++ while (timeout) {
++ extcnf_ctrl = er32(EXTCNF_CTRL);
+
-+ u8 revision_id;
-+};
++ if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) {
++ extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
++ ew32(EXTCNF_CTRL, extcnf_ctrl);
+
-+#include "e1000_82571.h"
-+#include "e1000_80003es2lan.h"
-+#include "e1000_ich8lan.h"
++ extcnf_ctrl = er32(EXTCNF_CTRL);
++ if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
++ break;
++ }
++ mdelay(1);
++ timeout--;
++ }
+
-+/* These functions must be implemented by drivers */
-+s32 e1000_alloc_zeroed_dev_spec_struct(struct e1000_hw *hw, u32 size);
-+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
-+void e1000_free_dev_spec_struct(struct e1000_hw *hw);
-+void e1000_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
++ if (!timeout) {
++ e_dbg("SW/FW/HW has locked the resource for too long.\n");
++ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
++ ew32(EXTCNF_CTRL, extcnf_ctrl);
++ mutex_unlock(&nvm_mutex);
++ ret_val = -E1000_ERR_CONFIG;
++ goto out;
++ }
+
-+#endif
-diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_ich8lan.c linux-2.6.22-10/drivers/net/e1000e/e1000_ich8lan.c
---- linux-2.6.22-0/drivers/net/e1000e/e1000_ich8lan.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_ich8lan.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,2757 @@
-+/*******************************************************************************
++out:
++ return ret_val;
++}
+
-+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++/**
++ * e1000_release_swflag_ich8lan - Release software control flag
++ * @hw: pointer to the HW structure
++ *
++ * Releases the software control flag for performing NVM and PHY operations.
++ * This is a function pointer entry point only called by read/write
++ * routines for the PHY and NVM parts.
++ **/
++static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
++{
++ u32 extcnf_ctrl;
+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms and conditions of the GNU General Public License,
-+ version 2, as published by the Free Software Foundation.
++ extcnf_ctrl = er32(EXTCNF_CTRL);
++ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
++ ew32(EXTCNF_CTRL, extcnf_ctrl);
+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ more details.
++ mutex_unlock(&nvm_mutex);
++}
+
-+ You should have received a copy of the GNU General Public License along with
-+ this program; if not, write to the Free Software Foundation, Inc.,
-+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
++/**
++ * e1000_check_mng_mode_ich8lan - Checks management mode
++ * @hw: pointer to the HW structure
++ *
++ * This checks if the adapter has manageability enabled.
++ * This is a function pointer entry point only called by read/write
++ * routines for the PHY and NVM parts.
++ **/
++static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
++{
++ u32 fwsm;
+
-+ The full GNU General Public License is included in this distribution in
-+ the file called "COPYING".
++ fwsm = er32(FWSM);
++ return (fwsm & E1000_FWSM_MODE_MASK) ==
++ (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
++}
++/**
++ * e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
++ * @hw: pointer to the HW structure
++ *
++ * Checks if firmware is blocking the reset of the PHY.
++ * This is a function pointer entry point only called by
++ * reset routines.
++ **/
++static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
++{
++ u32 fwsm;
+
-+ Contact Information:
-+ Linux NICS <linux.nics@intel.com>
-+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
++ fwsm = er32(FWSM);
++ return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? E1000_SUCCESS
++ : E1000_BLK_PHY_RESET;
++}
+
-+*******************************************************************************/
++/**
++ * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
++ * done after every PHY reset.
++ **/
++static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
++{
++ s32 ret_val = E1000_SUCCESS;
+
-+/* e1000_ich8lan
-+ * e1000_ich9lan
-+ */
++ if (hw->mac.type != e1000_pchlan)
++ return ret_val;
+
-+#include "e1000_hw.h"
++ if (((hw->phy.type == e1000_phy_82577) &&
++ ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
++ ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
++ /* Disable generation of early preamble */
++ ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431);
++ if (ret_val)
++ return ret_val;
+
-+static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw);
-+static void e1000_release_swflag_ich8lan(struct e1000_hw *hw);
-+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw,
-+ bool active);
-+static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw,
-+ bool active);
-+static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset,
-+ u16 words, u16 *data);
-+static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset,
-+ u16 words, u16 *data);
-+static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw,
-+ u16 *data);
-+static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw,
-+ u16 *speed, u16 *duplex);
-+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
-+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
-+static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout);
-+static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw);
-+static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
-+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw,
-+ u32 offset, u8* data);
-+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
-+ u8 size, u16* data);
-+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw,
-+ u32 offset, u16 *data);
-+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
-+ u32 offset, u8 byte);
-+static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw,
-+ u32 offset, u8 data);
-+static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
-+ u8 size, u16 data);
-+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
-+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
++ /* Preamble tuning for SSC */
++ ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
++ if (ret_val)
++ return ret_val;
++ }
+
-+/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
-+/* Offset 04h HSFSTS */
-+union ich8_hws_flash_status {
-+ struct ich8_hsfsts {
-+ u16 flcdone :1; /* bit 0 Flash Cycle Done */
-+ u16 flcerr :1; /* bit 1 Flash Cycle Error */
-+ u16 dael :1; /* bit 2 Direct Access error Log */
-+ u16 berasesz :2; /* bit 4:3 Sector Erase Size */
-+ u16 flcinprog :1; /* bit 5 flash cycle in Progress */
-+ u16 reserved1 :2; /* bit 13:6 Reserved */
-+ u16 reserved2 :6; /* bit 13:6 Reserved */
-+ u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
-+ u16 flockdn :1; /* bit 15 Flash Config Lock-Down */
-+ } hsf_status;
-+ u16 regval;
-+};
++ if (hw->phy.type == e1000_phy_82578) {
++ /*
++ * Return registers to default by doing a soft reset then
++ * writing 0x3140 to the control register.
++ */
++ if (hw->phy.revision < 2) {
++ e1000e_phy_sw_reset(hw);
++ ret_val = e1e_wphy(hw, PHY_CONTROL,
++ 0x3140);
++ }
++ }
+
-+/* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */
-+/* Offset 06h FLCTL */
-+union ich8_hws_flash_ctrl {
-+ struct ich8_hsflctl {
-+ u16 flcgo :1; /* 0 Flash Cycle Go */
-+ u16 flcycle :2; /* 2:1 Flash Cycle */
-+ u16 reserved :5; /* 7:3 Reserved */
-+ u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
-+ u16 flockdn :6; /* 15:10 Reserved */
-+ } hsf_ctrl;
-+ u16 regval;
-+};
++ /* Select page 0 */
++ ret_val = hw->phy.ops.acquire(hw);
++ if (ret_val)
++ return ret_val;
++ hw->phy.addr = 1;
++ e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
++ hw->phy.ops.release(hw);
+
-+/* ICH Flash Region Access Permissions */
-+union ich8_hws_flash_regacc {
-+ struct ich8_flracc {
-+ u32 grra :8; /* 0:7 GbE region Read Access */
-+ u32 grwa :8; /* 8:15 GbE region Write Access */
-+ u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
-+ u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
-+ } hsf_flregacc;
-+ u16 regval;
-+};
++ return ret_val;
++}
+
-+struct e1000_shadow_ram {
-+ u16 value;
-+ bool modified;
-+};
++/**
++ * e1000_lan_init_done_ich8lan - Check for PHY config completion
++ * @hw: pointer to the HW structure
++ *
++ * Check the appropriate indication the MAC has finished configuring the
++ * PHY after a software reset.
++ **/
++static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
++{
++ u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+
-+struct e1000_dev_spec_ich8lan {
-+ bool kmrn_lock_loss_workaround_enabled;
-+ struct e1000_shadow_ram shadow_ram[E1000_SHADOW_RAM_WORDS];
-+};
++ /* Wait for basic configuration completes before proceeding */
++ do {
++ data = er32(STATUS);
++ data &= E1000_STATUS_LAN_INIT_DONE;
++ udelay(100);
++ } while ((!data) && --loop);
++
++ /*
++ * If basic configuration is incomplete before the above loop
++ * count reaches 0, loading the configuration from NVM will
++ * leave the PHY in a bad state possibly resulting in no link.
++ */
++ if (loop == 0)
++ e_dbg("LAN_INIT_DONE not set, increase timeout\n");
++
++ /* Clear the Init Done bit for the next init event */
++ data = er32(STATUS);
++ data &= ~E1000_STATUS_LAN_INIT_DONE;
++ ew32(STATUS, data);
++}
+
+/**
-+ * e1000_init_phy_params_ich8lan - Initialize PHY function pointers
++ * e1000_phy_hw_reset_ich8lan - Performs a PHY reset
+ * @hw: pointer to the HW structure
+ *
-+ * Initialize family-specific PHY parameters and function pointers.
++ * Resets the PHY
++ * This is a function pointer entry point called by drivers
++ * or other shared routines.
+ **/
-+static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
++static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
-+ s32 ret_val = E1000_SUCCESS;
-+ u16 i = 0;
-+
-+ DEBUGFUNC("e1000_init_phy_params_ich8lan");
-+
-+ phy->addr = 1;
-+ phy->reset_delay_us = 100;
++ u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
++ s32 ret_val;
++ u16 word_addr, reg_data, reg_addr, phy_page = 0;
+
-+ phy->ops.acquire = e1000_acquire_swflag_ich8lan;
-+ phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan;
-+ phy->ops.check_reset_block = e1000_check_reset_block_ich8lan;
-+ phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ich8lan;
-+ phy->ops.get_cable_length = e1000_get_cable_length_igp_2;
-+ phy->ops.get_cfg_done = e1000_get_cfg_done_ich8lan;
-+ phy->ops.get_info = e1000_get_phy_info_ich8lan;
-+ phy->ops.read_reg = e1000_read_phy_reg_igp;
-+ phy->ops.release = e1000_release_swflag_ich8lan;
-+ phy->ops.reset = e1000_phy_hw_reset_ich8lan;
-+ phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan;
-+ phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan;
-+ phy->ops.write_reg = e1000_write_phy_reg_igp;
-+ phy->ops.power_up = e1000_power_up_phy_copper;
-+ phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
++ ret_val = e1000e_phy_hw_reset_generic(hw);
++ if (ret_val)
++ goto out;
+
-+ /*
-+ * We may need to do this twice - once for IGP and if that fails,
-+ * we'll set BM func pointers and try again
-+ */
-+ ret_val = e1000_determine_phy_address(hw);
-+ if (ret_val) {
-+ phy->ops.write_reg = e1000_write_phy_reg_bm;
-+ phy->ops.read_reg = e1000_read_phy_reg_bm;
-+ ret_val = e1000_determine_phy_address(hw);
-+ if (ret_val) {
-+ DEBUGOUT("Cannot determine PHY address. Erroring out\n");
-+ goto out;
-+ }
-+ }
++ /* Allow time for h/w to get to a quiescent state after reset */
++ msleep(10);
+
-+ phy->id = 0;
-+ while ((e1000_phy_unknown == e1000_get_phy_type_from_id(phy->id)) &&
-+ (i++ < 100)) {
-+ msec_delay(1);
-+ ret_val = e1000_get_phy_id(hw);
++ if (hw->mac.type == e1000_pchlan) {
++ ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+ if (ret_val)
+ goto out;
+ }
+
-+ /* Verify phy id */
-+ switch (phy->id) {
-+ case IGP03E1000_E_PHY_ID:
-+ phy->type = e1000_phy_igp_3;
-+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-+ break;
-+ case IFE_E_PHY_ID:
-+ case IFE_PLUS_E_PHY_ID:
-+ case IFE_C_E_PHY_ID:
-+ phy->type = e1000_phy_ife;
-+ phy->autoneg_mask = E1000_ALL_NOT_GIG;
-+ break;
-+ case BME1000_E_PHY_ID:
-+ phy->type = e1000_phy_bm;
-+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-+ phy->ops.read_reg = e1000_read_phy_reg_bm;
-+ phy->ops.write_reg = e1000_write_phy_reg_bm;
-+ phy->ops.commit = e1000_phy_sw_reset_generic;
-+ break;
-+ default:
-+ ret_val = -E1000_ERR_PHY;
-+ goto out;
-+ }
-+
-+out:
-+ return ret_val;
-+}
++ /*
++ * Initialize the PHY from the NVM on ICH platforms. This
++ * is needed due to an issue where the NVM configuration is
++ * not properly autoloaded after power transitions.
++ * Therefore, after each PHY reset, we will load the
++ * configuration data out of the NVM manually.
++ */
++ if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) {
++ /* Check if SW needs configure the PHY */
++ if ((hw->device_id == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
++ (hw->device_id == E1000_DEV_ID_ICH8_IGP_M))
++ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
++ else
++ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+
-+/**
-+ * e1000_init_nvm_params_ich8lan - Initialize NVM function pointers
-+ * @hw: pointer to the HW structure
-+ *
-+ * Initialize family-specific NVM parameters and function
-+ * pointers.
-+ **/
-+static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
-+{
-+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ struct e1000_dev_spec_ich8lan *dev_spec;
-+ u32 gfpreg, sector_base_addr, sector_end_addr;
-+ s32 ret_val = E1000_SUCCESS;
-+ u16 i;
++ data = er32(FEXTNVM);
++ if (!(data & sw_cfg_mask))
++ goto out;
+
-+ DEBUGFUNC("e1000_init_nvm_params_ich8lan");
++ /* Wait for basic configuration completes before proceeding */
++ e1000_lan_init_done_ich8lan(hw);
+
-+ /* Can't read flash registers if the register set isn't mapped. */
-+ if (!hw->flash_address) {
-+ DEBUGOUT("ERROR: Flash registers not mapped\n");
-+ ret_val = -E1000_ERR_CONFIG;
-+ goto out;
-+ }
++ /*
++ * Make sure HW does not configure LCD from PHY
++ * extended configuration before SW configuration
++ */
++ data = er32(EXTCNF_CTRL);
++ if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
++ goto out;
+
-+ nvm->type = e1000_nvm_flash_sw;
++ cnf_size = er32(EXTCNF_SIZE);
++ cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
++ cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
++ if (!cnf_size)
++ goto out;
+
-+ gfpreg = E1000_READ_FLASH_REG(hw, ICH_FLASH_GFPREG);
++ cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
++ cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+
-+ /*
-+ * sector_X_addr is a "sector"-aligned address (4096 bytes)
-+ * Add 1 to sector_end_addr since this sector is included in
-+ * the overall size.
-+ */
-+ sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
-+ sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
++ /* Configure LCD from extended configuration region. */
+
-+ /* flash_base_addr is byte-aligned */
-+ nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT;
++ /* cnf_base_addr is in DWORD */
++ word_addr = (u16)(cnf_base_addr << 1);
+
-+ /*
-+ * find total size of the NVM, then cut in half since the total
-+ * size represents two separate NVM banks.
-+ */
-+ nvm->flash_bank_size = (sector_end_addr - sector_base_addr)
-+ << FLASH_SECTOR_ADDR_SHIFT;
-+ nvm->flash_bank_size /= 2;
-+ /* Adjust to word count */
-+ nvm->flash_bank_size /= sizeof(u16);
++ for (i = 0; i < cnf_size; i++) {
++ ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
++ ®_data);
++ if (ret_val)
++ goto out;
+
-+ nvm->word_size = E1000_SHADOW_RAM_WORDS;
++ ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
++ 1, ®_addr);
++ if (ret_val)
++ goto out;
+
-+ dev_spec = (struct e1000_dev_spec_ich8lan *)hw->dev_spec;
++ /* Save off the PHY page for future writes. */
++ if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
++ phy_page = reg_data;
++ continue;
++ }
+
-+ if (!dev_spec) {
-+ DEBUGOUT("dev_spec pointer is set to NULL.\n");
-+ ret_val = -E1000_ERR_CONFIG;
-+ goto out;
-+ }
++ reg_addr |= phy_page;
+
-+ /* Clear shadow ram */
-+ for (i = 0; i < nvm->word_size; i++) {
-+ dev_spec->shadow_ram[i].modified = false;
-+ dev_spec->shadow_ram[i].value = 0xFFFF;
++ ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data);
++ if (ret_val)
++ goto out;
++ }
+ }
+
-+ /* Function Pointers */
-+ nvm->ops.acquire = e1000_acquire_swflag_ich8lan;
-+ nvm->ops.read = e1000_read_nvm_ich8lan;
-+ nvm->ops.release = e1000_release_swflag_ich8lan;
-+ nvm->ops.update = e1000_update_nvm_checksum_ich8lan;
-+ nvm->ops.valid_led_default = e1000_valid_led_default_ich8lan;
-+ nvm->ops.validate = e1000_validate_nvm_checksum_ich8lan;
-+ nvm->ops.write = e1000_write_nvm_ich8lan;
-+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_init_mac_params_ich8lan - Initialize MAC function pointers
++ * e1000_get_phy_info_ich8lan - Calls appropriate PHY type get_phy_info
+ * @hw: pointer to the HW structure
+ *
-+ * Initialize family-specific MAC parameters and function
-+ * pointers.
++ * Wrapper for calling the get_phy_info routines for the appropriate phy type.
+ **/
-+static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
++static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
+{
-+ struct e1000_mac_info *mac = &hw->mac;
-+ s32 ret_val = E1000_SUCCESS;
++ s32 ret_val = -E1000_ERR_PHY_TYPE;
++
++ switch (hw->phy.type) {
++ case e1000_phy_ife:
++ ret_val = e1000_get_phy_info_ife_ich8lan(hw);
++ break;
++ case e1000_phy_igp_3:
++ case e1000_phy_bm:
++ case e1000_phy_82578:
++ case e1000_phy_82577:
++ ret_val = e1000e_get_phy_info_igp(hw);
++ break;
++ default:
++ break;
++ }
+
-+ DEBUGFUNC("e1000_init_mac_params_ich8lan");
++ return ret_val;
++}
+
-+ /* Set media type function pointer */
-+ hw->phy.media_type = e1000_media_type_copper;
++/**
++ * e1000_get_phy_info_ife_ich8lan - Retrieves various IFE PHY states
++ * @hw: pointer to the HW structure
++ *
++ * Populates "phy" structure with various feature states.
++ * This function is only called by other family-specific
++ * routines.
++ **/
++static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw)
++{
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val;
++ u16 data;
++ bool link;
+
-+ /* Set mta register count */
-+ mac->mta_reg_count = 32;
-+ /* Set rar entry count */
-+ mac->rar_entry_count = E1000_ICH_RAR_ENTRIES;
-+ if (mac->type == e1000_ich8lan)
-+ mac->rar_entry_count--;
-+ /* Set if part includes ASF firmware */
-+ mac->asf_firmware_present = true;
-+ /* Set if manageability features are enabled. */
-+ mac->arc_subsystem_valid = true;
++ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
++ if (ret_val)
++ goto out;
+
-+ /* Function pointers */
++ if (!link) {
++ e_dbg("Phy info is only valid if link is up\n");
++ ret_val = -E1000_ERR_CONFIG;
++ goto out;
++ }
+
-+ /* bus type/speed/width */
-+ mac->ops.get_bus_info = e1000_get_bus_info_ich8lan;
-+ /* reset */
-+ mac->ops.reset_hw = e1000_reset_hw_ich8lan;
-+ /* hw initialization */
-+ mac->ops.init_hw = e1000_init_hw_ich8lan;
-+ /* link setup */
-+ mac->ops.setup_link = e1000_setup_link_ich8lan;
-+ /* physical interface setup */
-+ mac->ops.setup_physical_interface = e1000_setup_copper_link_ich8lan;
-+ /* check for link */
-+ mac->ops.check_for_link = e1000_check_for_copper_link_generic;
-+ /* check management mode */
-+ mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
-+ /* link info */
-+ mac->ops.get_link_up_info = e1000_get_link_up_info_ich8lan;
-+ /* multicast address update */
-+ mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic;
-+ /* setting MTA */
-+ mac->ops.mta_set = e1000_mta_set_generic;
-+ /* blink LED */
-+ mac->ops.blink_led = e1000_blink_led_generic;
-+ /* setup LED */
-+ mac->ops.setup_led = e1000_setup_led_generic;
-+ /* cleanup LED */
-+ mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
-+ /* turn on/off LED */
-+ mac->ops.led_on = e1000_led_on_ich8lan;
-+ mac->ops.led_off = e1000_led_off_ich8lan;
-+ /* remove device */
-+ mac->ops.remove_device = e1000_remove_device_generic;
-+ /* clear hardware counters */
-+ mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan;
++ ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
++ if (ret_val)
++ goto out;
++ phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
++ ? false : true;
+
-+ hw->dev_spec_size = sizeof(struct e1000_dev_spec_ich8lan);
++ if (phy->polarity_correction) {
++ ret_val = e1000_check_polarity_ife(hw);
++ if (ret_val)
++ goto out;
++ } else {
++ /* Polarity is forced */
++ phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
++ ? e1000_rev_polarity_reversed
++ : e1000_rev_polarity_normal;
++ }
+
-+ /* Device-specific structure allocation */
-+ ret_val = e1000_alloc_zeroed_dev_spec_struct(hw, hw->dev_spec_size);
++ ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+ if (ret_val)
+ goto out;
+
-+ /* Enable PCS Lock-loss workaround for ICH8 */
-+ if (mac->type == e1000_ich8lan)
-+ e1000_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
++ phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
+
++ /* The following parameters are undefined for 10/100 operation. */
++ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
++ phy->local_rx = e1000_1000t_rx_status_undefined;
++ phy->remote_rx = e1000_1000t_rx_status_undefined;
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_init_function_pointers_ich8lan - Initialize ICH8 function pointers
-+ * @hw: pointer to the HW structure
-+ *
-+ * Initialize family-specific function pointers for PHY, MAC, and NVM.
-+ **/
-+void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw)
-+{
-+ DEBUGFUNC("e1000_init_function_pointers_ich8lan");
-+
-+ e1000_init_mac_ops_generic(hw);
-+ e1000_init_nvm_ops_generic(hw);
-+ hw->mac.ops.init_params = e1000_init_mac_params_ich8lan;
-+ hw->nvm.ops.init_params = e1000_init_nvm_params_ich8lan;
-+ hw->phy.ops.init_params = e1000_init_phy_params_ich8lan;
-+}
-+
-+/**
-+ * e1000_acquire_swflag_ich8lan - Acquire software control flag
++ * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
++ * @active: true to enable LPLU, false to disable
+ *
-+ * Acquires the software control flag for performing NVM and PHY
-+ * operations. This is a function pointer entry point only called by
-+ * read/write routines for the PHY and NVM parts.
++ * Sets the LPLU D0 state according to the active flag. When
++ * activating LPLU this function also disables smart speed
++ * and vice versa. LPLU will not be activated unless the
++ * device autonegotiation advertisement meets standards of
++ * either 10 or 10/100 or 10/100/1000 at all duplexes.
++ * This is a function pointer entry point only called by
++ * PHY setup routines.
+ **/
-+static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
++static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
+{
-+ u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
++ struct e1000_phy_info *phy = &hw->phy;
++ u32 phy_ctrl;
+ s32 ret_val = E1000_SUCCESS;
++ u16 data;
+
-+ DEBUGFUNC("e1000_acquire_swflag_ich8lan");
++ if (phy->type == e1000_phy_ife)
++ goto out;
+
-+ while (timeout) {
-+ extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
-+ extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
-+ E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl);
++ phy_ctrl = er32(PHY_CTRL);
+
-+ extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
-+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
-+ break;
-+ msec_delay_irq(1);
-+ timeout--;
-+ }
++ if (active) {
++ phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
++ ew32(PHY_CTRL, phy_ctrl);
+
-+ if (!timeout) {
-+ DEBUGOUT("FW or HW has locked the resource for too long.\n");
-+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
-+ E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl);
-+ ret_val = -E1000_ERR_CONFIG;
-+ goto out;
++ if (phy->type != e1000_phy_igp_3)
++ goto out;
++
++ /*
++ * Call gig speed drop workaround on LPLU before accessing
++ * any PHY registers
++ */
++ if (hw->mac.type == e1000_ich8lan)
++ e1000e_gig_downshift_workaround_ich8lan(hw);
++
++ /* When LPLU is enabled, we should disable SmartSpeed */
++ ret_val = e1e_rphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ &data);
++ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
++ ret_val = e1e_wphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ data);
++ if (ret_val)
++ goto out;
++ } else {
++ phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
++ ew32(PHY_CTRL, phy_ctrl);
++
++ if (phy->type != e1000_phy_igp_3)
++ goto out;
++
++ /*
++ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
++ * during Dx states where the power conservation is most
++ * important. During driver activity we should enable
++ * SmartSpeed, so performance is maintained.
++ */
++ if (phy->smart_speed == e1000_smart_speed_on) {
++ ret_val = e1e_rphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ &data);
++ if (ret_val)
++ goto out;
++
++ data |= IGP01E1000_PSCFR_SMART_SPEED;
++ ret_val = e1e_wphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ data);
++ if (ret_val)
++ goto out;
++ } else if (phy->smart_speed == e1000_smart_speed_off) {
++ ret_val = e1e_rphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ &data);
++ if (ret_val)
++ goto out;
++
++ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
++ ret_val = e1e_wphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ data);
++ if (ret_val)
++ goto out;
++ }
+ }
+
+out:
+}
+
+/**
-+ * e1000_release_swflag_ich8lan - Release software control flag
++ * e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
+ * @hw: pointer to the HW structure
++ * @active: true to enable LPLU, false to disable
+ *
-+ * Releases the software control flag for performing NVM and PHY operations.
-+ * This is a function pointer entry point only called by read/write
-+ * routines for the PHY and NVM parts.
++ * Sets the LPLU D3 state according to the active flag. When
++ * activating LPLU this function also disables smart speed
++ * and vice versa. LPLU will not be activated unless the
++ * device autonegotiation advertisement meets standards of
++ * either 10 or 10/100 or 10/100/1000 at all duplexes.
++ * This is a function pointer entry point only called by
++ * PHY setup routines.
+ **/
-+static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
++static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
+{
-+ u32 extcnf_ctrl;
++ struct e1000_phy_info *phy = &hw->phy;
++ u32 phy_ctrl;
++ s32 ret_val = E1000_SUCCESS;
++ u16 data;
+
-+ DEBUGFUNC("e1000_release_swflag_ich8lan");
++ phy_ctrl = er32(PHY_CTRL);
+
-+ extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
-+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
-+ E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl);
++ if (!active) {
++ phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
++ ew32(PHY_CTRL, phy_ctrl);
+
-+ return;
-+}
++ if (phy->type != e1000_phy_igp_3)
++ goto out;
+
-+/**
-+ * e1000_check_mng_mode_ich8lan - Checks management mode
-+ * @hw: pointer to the HW structure
-+ *
-+ * This checks if the adapter has manageability enabled.
-+ * This is a function pointer entry point only called by read/write
-+ * routines for the PHY and NVM parts.
-+ **/
-+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
-+{
-+ u32 fwsm;
++ /*
++ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
++ * during Dx states where the power conservation is most
++ * important. During driver activity we should enable
++ * SmartSpeed, so performance is maintained.
++ */
++ if (phy->smart_speed == e1000_smart_speed_on) {
++ ret_val = e1e_rphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ &data);
++ if (ret_val)
++ goto out;
+
-+ DEBUGFUNC("e1000_check_mng_mode_ich8lan");
++ data |= IGP01E1000_PSCFR_SMART_SPEED;
++ ret_val = e1e_wphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ data);
++ if (ret_val)
++ goto out;
++ } else if (phy->smart_speed == e1000_smart_speed_off) {
++ ret_val = e1e_rphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ &data);
++ if (ret_val)
++ goto out;
+
-+ fwsm = E1000_READ_REG(hw, E1000_FWSM);
++ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
++ ret_val = e1e_wphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ data);
++ if (ret_val)
++ goto out;
++ }
++ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
++ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
++ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
++ phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
++ ew32(PHY_CTRL, phy_ctrl);
+
-+ return ((fwsm & E1000_FWSM_MODE_MASK) ==
-+ (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
-+}
++ if (phy->type != e1000_phy_igp_3)
++ goto out;
+
-+/**
-+ * e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
-+ * @hw: pointer to the HW structure
-+ *
-+ * Checks if firmware is blocking the reset of the PHY.
-+ * This is a function pointer entry point only called by
-+ * reset routines.
-+ **/
-+static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
-+{
-+ u32 fwsm;
++ /*
++ * Call gig speed drop workaround on LPLU before accessing
++ * any PHY registers
++ */
++ if (hw->mac.type == e1000_ich8lan)
++ e1000e_gig_downshift_workaround_ich8lan(hw);
+
-+ DEBUGFUNC("e1000_check_reset_block_ich8lan");
++ /* When LPLU is enabled, we should disable SmartSpeed */
++ ret_val = e1e_rphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ &data);
++ if (ret_val)
++ goto out;
+
-+ fwsm = E1000_READ_REG(hw, E1000_FWSM);
++ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
++ ret_val = e1e_wphy(hw,
++ IGP01E1000_PHY_PORT_CONFIG,
++ data);
++ }
+
-+ return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? E1000_SUCCESS
-+ : E1000_BLK_PHY_RESET;
++out:
++ return ret_val;
+}
+
+/**
-+ * e1000_phy_force_speed_duplex_ich8lan - Force PHY speed & duplex
++ * e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1
+ * @hw: pointer to the HW structure
++ * @bank: pointer to the variable that returns the active bank
+ *
-+ * Forces the speed and duplex settings of the PHY.
-+ * This is a function pointer entry point only called by
-+ * PHY setup routines.
++ * Reads signature byte from the NVM using the flash access registers.
++ * Word 0x13 bits 15:14 = 10b indicate a valid signature for that bank.
+ **/
-+static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
++static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
+{
-+ struct e1000_phy_info *phy = &hw->phy;
-+ s32 ret_val;
-+ u16 data;
-+ bool link;
-+
-+ DEBUGFUNC("e1000_phy_force_speed_duplex_ich8lan");
-+
-+ if (phy->type != e1000_phy_ife) {
-+ ret_val = e1000_phy_force_speed_duplex_igp(hw);
-+ goto out;
-+ }
-+
-+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &data);
-+ if (ret_val)
-+ goto out;
-+
-+ e1000_phy_force_speed_duplex_setup(hw, &data);
-+
-+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, data);
-+ if (ret_val)
-+ goto out;
-+
-+ /* Disable MDI-X support for 10/100 */
-+ ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data);
-+ if (ret_val)
-+ goto out;
-+
-+ data &= ~IFE_PMC_AUTO_MDIX;
-+ data &= ~IFE_PMC_FORCE_MDIX;
-+
-+ ret_val = phy->ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, data);
-+ if (ret_val)
-+ goto out;
-+
-+ DEBUGOUT1("IFE PMC: %X\n", data);
++ u32 eecd;
++ struct e1000_nvm_info *nvm = &hw->nvm;
++ u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
++ u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
++ u8 sig_byte = 0;
++ s32 ret_val = E1000_SUCCESS;
+
-+ usec_delay(1);
++ switch (hw->mac.type) {
++ case e1000_ich8lan:
++ case e1000_ich9lan:
++ eecd = er32(EECD);
++ if ((eecd & E1000_EECD_SEC1VAL_VALID_MASK) ==
++ E1000_EECD_SEC1VAL_VALID_MASK) {
++ if (eecd & E1000_EECD_SEC1VAL)
++ *bank = 1;
++ else
++ *bank = 0;
+
-+ if (phy->autoneg_wait_to_complete) {
-+ DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n");
++ goto out;
++ }
++ e_dbg("Unable to determine valid NVM bank via EEC - "
++ "reading flash signature\n");
++ /* fall-thru */
++ default:
++ /* set bank to 0 in case flash read fails */
++ *bank = 0;
+
-+ ret_val = e1000_phy_has_link_generic(hw,
-+ PHY_FORCE_LIMIT,
-+ 100000,
-+ &link);
++ /* Check bank 0 */
++ ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
++ &sig_byte);
+ if (ret_val)
+ goto out;
-+
-+ if (!link) {
-+ DEBUGOUT("Link taking longer than expected.\n");
++ if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
++ E1000_ICH_NVM_SIG_VALUE) {
++ *bank = 0;
++ goto out;
+ }
+
-+ /* Try once more */
-+ ret_val = e1000_phy_has_link_generic(hw,
-+ PHY_FORCE_LIMIT,
-+ 100000,
-+ &link);
++ /* Check bank 1 */
++ ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
++ bank1_offset,
++ &sig_byte);
+ if (ret_val)
+ goto out;
-+ }
++ if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
++ E1000_ICH_NVM_SIG_VALUE) {
++ *bank = 1;
++ goto out;
++ }
+
++ e_dbg("ERROR: No valid NVM bank present\n");
++ ret_val = -E1000_ERR_NVM;
++ break;
++ }
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_phy_hw_reset_ich8lan - Performs a PHY reset
++ * e1000_read_nvm_ich8lan - Read word(s) from the NVM
+ * @hw: pointer to the HW structure
++ * @offset: The offset (in bytes) of the word(s) to read.
++ * @words: Size of data to read in words
++ * @data: Pointer to the word(s) to read at offset.
+ *
-+ * Resets the PHY
-+ * This is a function pointer entry point called by drivers
-+ * or other shared routines.
++ * Reads a word(s) from the NVM using the flash access registers.
+ **/
-+static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
++static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
++ u16 *data)
+{
-+ struct e1000_phy_info *phy = &hw->phy;
+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
-+ s32 ret_val;
-+ u16 loop = E1000_ICH8_LAN_INIT_TIMEOUT;
-+ u16 word_addr, reg_data, reg_addr, phy_page = 0;
++ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
++ u32 act_offset;
++ s32 ret_val = E1000_SUCCESS;
++ u32 bank = 0;
++ u16 i, word;
+
-+ DEBUGFUNC("e1000_phy_hw_reset_ich8lan");
++ if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
++ (words == 0)) {
++ e_dbg("nvm parameter(s) out of bounds\n");
++ ret_val = -E1000_ERR_NVM;
++ goto out;
++ }
+
-+ ret_val = e1000_phy_hw_reset_generic(hw);
++ ret_val = nvm->ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
-+ /*
-+ * Initialize the PHY from the NVM on ICH platforms. This
-+ * is needed due to an issue where the NVM configuration is
-+ * not properly autoloaded after power transitions.
-+ * Therefore, after each PHY reset, we will load the
-+ * configuration data out of the NVM manually.
-+ */
-+ if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) {
-+ /* Check if SW needs configure the PHY */
-+ if ((hw->device_id == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
-+ (hw->device_id == E1000_DEV_ID_ICH8_IGP_M))
-+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
-+ else
-+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
-+
-+ data = E1000_READ_REG(hw, E1000_FEXTNVM);
-+ if (!(data & sw_cfg_mask))
-+ goto out;
++ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
++ if (ret_val != E1000_SUCCESS)
++ goto release;
+
-+ /* Wait for basic configuration completes before proceeding*/
-+ do {
-+ data = E1000_READ_REG(hw, E1000_STATUS);
-+ data &= E1000_STATUS_LAN_INIT_DONE;
-+ usec_delay(100);
-+ } while ((!data) && --loop);
++ act_offset = (bank) ? nvm->flash_bank_size : 0;
++ act_offset += offset;
+
-+ /*
-+ * If basic configuration is incomplete before the above loop
-+ * count reaches 0, loading the configuration from NVM will
-+ * leave the PHY in a bad state possibly resulting in no link.
-+ */
-+ if (loop == 0) {
-+ DEBUGOUT("LAN_INIT_DONE not set, increase timeout\n");
++ for (i = 0; i < words; i++) {
++ if ((dev_spec->shadow_ram) &&
++ (dev_spec->shadow_ram[offset+i].modified)) {
++ data[i] = dev_spec->shadow_ram[offset+i].value;
++ } else {
++ ret_val = e1000_read_flash_word_ich8lan(hw,
++ act_offset + i,
++ &word);
++ if (ret_val)
++ break;
++ data[i] = word;
+ }
++ }
+
-+ /* Clear the Init Done bit for the next init event */
-+ data = E1000_READ_REG(hw, E1000_STATUS);
-+ data &= ~E1000_STATUS_LAN_INIT_DONE;
-+ E1000_WRITE_REG(hw, E1000_STATUS, data);
-+
-+ /*
-+ * Make sure HW does not configure LCD from PHY
-+ * extended configuration before SW configuration
-+ */
-+ data = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
-+ if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
-+ goto out;
++release:
++ nvm->ops.release(hw);
+
-+ cnf_size = E1000_READ_REG(hw, E1000_EXTCNF_SIZE);
-+ cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
-+ cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
-+ if (!cnf_size)
-+ goto out;
++out:
++ if (ret_val)
++ e_dbg("NVM read error: %d\n", ret_val);
+
-+ cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
-+ cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
++ return ret_val;
++}
+
-+ /*
-+ * Configure LCD from extended configuration
-+ * region.
-+ */
++/**
++ * e1000_flash_cycle_init_ich8lan - Initialize flash
++ * @hw: pointer to the HW structure
++ *
++ * This function does initial flash setup so that a new read/write/erase cycle
++ * can be started.
++ **/
++static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
++{
++ union ich8_hws_flash_status hsfsts;
++ s32 ret_val = -E1000_ERR_NVM;
++ s32 i = 0;
+
-+ /* cnf_base_addr is in DWORD */
-+ word_addr = (u16)(cnf_base_addr << 1);
++ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+
-+ for (i = 0; i < cnf_size; i++) {
-+ ret_val = nvm->ops.read(hw,
-+ (word_addr + i * 2),
-+ 1,
-+ ®_data);
-+ if (ret_val)
-+ goto out;
++ /* Check if the flash descriptor is valid */
++ if (hsfsts.hsf_status.fldesvalid == 0) {
++ e_dbg("Flash descriptor invalid. "
++ "SW Sequencing must be used.");
++ goto out;
++ }
+
-+ ret_val = nvm->ops.read(hw,
-+ (word_addr + i * 2 + 1),
-+ 1,
-+ ®_addr);
-+ if (ret_val)
-+ goto out;
++ /* Clear FCERR and DAEL in hw status by writing 1 */
++ hsfsts.hsf_status.flcerr = 1;
++ hsfsts.hsf_status.dael = 1;
+
-+ /* Save off the PHY page for future writes. */
-+ if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
-+ phy_page = reg_data;
-+ continue;
-+ }
++ ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+
-+ reg_addr |= phy_page;
++ /*
++ * Either we should have a hardware SPI cycle in progress
++ * bit to check against, in order to start a new cycle or
++ * FDONE bit should be changed in the hardware so that it
++ * is 1 after hardware reset, which can then be used as an
++ * indication whether a cycle is in progress or has been
++ * completed.
++ */
+
-+ ret_val = phy->ops.write_reg(hw,
-+ (u32)reg_addr,
-+ reg_data);
-+ if (ret_val)
-+ goto out;
++ if (hsfsts.hsf_status.flcinprog == 0) {
++ /*
++ * There is no cycle running at present,
++ * so we can start a cycle.
++ * Begin by setting Flash Cycle Done.
++ */
++ hsfsts.hsf_status.flcdone = 1;
++ ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
++ ret_val = E1000_SUCCESS;
++ } else {
++ /*
++ * Otherwise poll for sometime so the current
++ * cycle has a chance to end before giving up.
++ */
++ for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
++ hsfsts.regval = er16flash(
++ ICH_FLASH_HSFSTS);
++ if (hsfsts.hsf_status.flcinprog == 0) {
++ ret_val = E1000_SUCCESS;
++ break;
++ }
++ udelay(1);
++ }
++ if (ret_val == E1000_SUCCESS) {
++ /*
++ * Successful in waiting for previous cycle to timeout,
++ * now set the Flash Cycle Done.
++ */
++ hsfsts.hsf_status.flcdone = 1;
++ ew16flash(ICH_FLASH_HSFSTS,
++ hsfsts.regval);
++ } else {
++ e_dbg("Flash controller busy, cannot get access");
+ }
+ }
+
+}
+
+/**
-+ * e1000_get_phy_info_ich8lan - Calls appropriate PHY type get_phy_info
++ * e1000_flash_cycle_ich8lan - Starts flash cycle (read/write/erase)
+ * @hw: pointer to the HW structure
++ * @timeout: maximum time to wait for completion
+ *
-+ * Wrapper for calling the get_phy_info routines for the appropriate phy type.
-+ * This is a function pointer entry point called by drivers
-+ * or other shared routines.
++ * This function starts a flash cycle and waits for its completion.
+ **/
-+static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
++static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
+{
-+ s32 ret_val = -E1000_ERR_PHY_TYPE;
++ union ich8_hws_flash_ctrl hsflctl;
++ union ich8_hws_flash_status hsfsts;
++ s32 ret_val = -E1000_ERR_NVM;
++ u32 i = 0;
+
-+ DEBUGFUNC("e1000_get_phy_info_ich8lan");
++ /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
++ hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
++ hsflctl.hsf_ctrl.flcgo = 1;
++ ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
-+ switch (hw->phy.type) {
-+ case e1000_phy_ife:
-+ ret_val = e1000_get_phy_info_ife_ich8lan(hw);
-+ break;
-+ case e1000_phy_igp_3:
-+ case e1000_phy_bm:
-+ ret_val = e1000_get_phy_info_igp(hw);
-+ break;
-+ default:
-+ break;
-+ }
++ /* wait till FDONE bit is set to 1 */
++ do {
++ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
++ if (hsfsts.hsf_status.flcdone == 1)
++ break;
++ udelay(1);
++ } while (i++ < timeout);
++
++ if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0)
++ ret_val = E1000_SUCCESS;
+
+ return ret_val;
+}
+
+/**
-+ * e1000_get_phy_info_ife_ich8lan - Retrieves various IFE PHY states
++ * e1000_read_flash_word_ich8lan - Read word from flash
+ * @hw: pointer to the HW structure
++ * @offset: offset to data location
++ * @data: pointer to the location for storing the data
+ *
-+ * Populates "phy" structure with various feature states.
-+ * This function is only called by other family-specific
-+ * routines.
++ * Reads the flash word at offset into data. Offset is converted
++ * to bytes before read.
+ **/
-+static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw)
++static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
++ u16 *data)
+{
-+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
-+ u16 data;
-+ bool link;
-+
-+ DEBUGFUNC("e1000_get_phy_info_ife_ich8lan");
-+
-+ ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
-+ if (ret_val)
-+ goto out;
-+
-+ if (!link) {
-+ DEBUGOUT("Phy info is only valid if link is up\n");
-+ ret_val = -E1000_ERR_CONFIG;
-+ goto out;
-+ }
+
-+ ret_val = phy->ops.read_reg(hw, IFE_PHY_SPECIAL_CONTROL, &data);
-+ if (ret_val)
++ if (!data) {
++ ret_val = -E1000_ERR_NVM;
+ goto out;
-+ phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
-+ ? false : true;
-+
-+ if (phy->polarity_correction) {
-+ ret_val = e1000_check_polarity_ife_ich8lan(hw);
-+ if (ret_val)
-+ goto out;
-+ } else {
-+ /* Polarity is forced */
-+ phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
-+ ? e1000_rev_polarity_reversed
-+ : e1000_rev_polarity_normal;
+ }
+
-+ ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data);
-+ if (ret_val)
-+ goto out;
-+
-+ phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
++ /* Must convert offset into bytes. */
++ offset <<= 1;
+
-+ /* The following parameters are undefined for 10/100 operation. */
-+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
-+ phy->local_rx = e1000_1000t_rx_status_undefined;
-+ phy->remote_rx = e1000_1000t_rx_status_undefined;
++ ret_val = e1000_read_flash_data_ich8lan(hw, offset, 2, data);
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY
++ * e1000_read_flash_byte_ich8lan - Read byte from flash
+ * @hw: pointer to the HW structure
++ * @offset: The offset of the byte to read.
++ * @data: Pointer to a byte to store the value read.
+ *
-+ * Polarity is determined on the polarity reversal feature being enabled.
-+ * This function is only called by other family-specific
-+ * routines.
++ * Reads a single byte from the NVM using the flash access registers.
+ **/
-+static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw)
++static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
++ u8 *data)
+{
-+ struct e1000_phy_info *phy = &hw->phy;
-+ s32 ret_val;
-+ u16 phy_data, offset, mask;
-+
-+ DEBUGFUNC("e1000_check_polarity_ife_ich8lan");
-+
-+ /*
-+ * Polarity is determined based on the reversal feature
-+ * being enabled.
-+ */
-+ if (phy->polarity_correction) {
-+ offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
-+ mask = IFE_PESC_POLARITY_REVERSED;
-+ } else {
-+ offset = IFE_PHY_SPECIAL_CONTROL;
-+ mask = IFE_PSC_FORCE_POLARITY;
-+ }
++ s32 ret_val = E1000_SUCCESS;
++ u16 word = 0;
+
-+ ret_val = phy->ops.read_reg(hw, offset, &phy_data);
++ ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word);
++ if (ret_val)
++ goto out;
+
-+ if (!ret_val)
-+ phy->cable_polarity = (phy_data & mask)
-+ ? e1000_rev_polarity_reversed
-+ : e1000_rev_polarity_normal;
++ *data = (u8)word;
+
++out:
+ return ret_val;
+}
+
+/**
-+ * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
++ * e1000_read_flash_data_ich8lan - Read byte or word from NVM
+ * @hw: pointer to the HW structure
-+ * @active: true to enable LPLU, false to disable
++ * @offset: The offset (in bytes) of the byte or word to read.
++ * @size: Size of data to read, 1=byte 2=word
++ * @data: Pointer to the word to store the value read.
+ *
-+ * Sets the LPLU D0 state according to the active flag. When
-+ * activating LPLU this function also disables smart speed
-+ * and vice versa. LPLU will not be activated unless the
-+ * device autonegotiation advertisement meets standards of
-+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
-+ * This is a function pointer entry point only called by
-+ * PHY setup routines.
++ * Reads a byte or word from the NVM using the flash access registers.
+ **/
-+static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw,
-+ bool active)
++static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
++ u8 size, u16 *data)
+{
-+ struct e1000_phy_info *phy = &hw->phy;
-+ u32 phy_ctrl;
-+ s32 ret_val = E1000_SUCCESS;
-+ u16 data;
-+
-+ DEBUGFUNC("e1000_set_d0_lplu_state_ich8lan");
++ union ich8_hws_flash_status hsfsts;
++ union ich8_hws_flash_ctrl hsflctl;
++ u32 flash_linear_addr;
++ u32 flash_data = 0;
++ s32 ret_val = -E1000_ERR_NVM;
++ u8 count = 0;
+
-+ if (phy->type == e1000_phy_ife)
++ if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
+ goto out;
++ flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
++ hw->nvm.flash_base_addr;
+
-+ phy_ctrl = E1000_READ_REG(hw, E1000_PHY_CTRL);
-+
-+ if (active) {
-+ phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
-+ E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl);
-+
-+ /*
-+ * Call gig speed drop workaround on LPLU before accessing
-+ * any PHY registers
-+ */
-+ if ((hw->mac.type == e1000_ich8lan) &&
-+ (hw->phy.type == e1000_phy_igp_3))
-+ e1000_gig_downshift_workaround_ich8lan(hw);
-+
-+ /* When LPLU is enabled, we should disable SmartSpeed */
-+ ret_val = phy->ops.read_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ &data);
-+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ data);
-+ if (ret_val)
-+ goto out;
-+ } else {
-+ phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
-+ E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl);
-+
-+ /*
-+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
-+ * during Dx states where the power conservation is most
-+ * important. During driver activity we should enable
-+ * SmartSpeed, so performance is maintained.
-+ */
-+ if (phy->smart_speed == e1000_smart_speed_on) {
-+ ret_val = phy->ops.read_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ &data);
-+ if (ret_val)
-+ goto out;
-+
-+ data |= IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ data);
-+ if (ret_val)
-+ goto out;
-+ } else if (phy->smart_speed == e1000_smart_speed_off) {
-+ ret_val = phy->ops.read_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ &data);
-+ if (ret_val)
-+ goto out;
-+
-+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ data);
-+ if (ret_val)
-+ goto out;
-+ }
-+ }
-+
-+out:
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
-+ * @hw: pointer to the HW structure
-+ * @active: true to enable LPLU, false to disable
-+ *
-+ * Sets the LPLU D3 state according to the active flag. When
-+ * activating LPLU this function also disables smart speed
-+ * and vice versa. LPLU will not be activated unless the
-+ * device autonegotiation advertisement meets standards of
-+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
-+ * This is a function pointer entry point only called by
-+ * PHY setup routines.
-+ **/
-+static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw,
-+ bool active)
-+{
-+ struct e1000_phy_info *phy = &hw->phy;
-+ u32 phy_ctrl;
-+ s32 ret_val = E1000_SUCCESS;
-+ u16 data;
-+
-+ DEBUGFUNC("e1000_set_d3_lplu_state_ich8lan");
-+
-+ phy_ctrl = E1000_READ_REG(hw, E1000_PHY_CTRL);
-+
-+ if (!active) {
-+ phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
-+ E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl);
-+ /*
-+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
-+ * during Dx states where the power conservation is most
-+ * important. During driver activity we should enable
-+ * SmartSpeed, so performance is maintained.
-+ */
-+ if (phy->smart_speed == e1000_smart_speed_on) {
-+ ret_val = phy->ops.read_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ &data);
-+ if (ret_val)
-+ goto out;
-+
-+ data |= IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ data);
-+ if (ret_val)
-+ goto out;
-+ } else if (phy->smart_speed == e1000_smart_speed_off) {
-+ ret_val = phy->ops.read_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ &data);
-+ if (ret_val)
-+ goto out;
-+
-+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ data);
-+ if (ret_val)
-+ goto out;
-+ }
-+ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
-+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
-+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
-+ phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
-+ E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl);
-+
-+ /*
-+ * Call gig speed drop workaround on LPLU before accessing
-+ * any PHY registers
-+ */
-+ if ((hw->mac.type == e1000_ich8lan) &&
-+ (hw->phy.type == e1000_phy_igp_3))
-+ e1000_gig_downshift_workaround_ich8lan(hw);
-+
-+ /* When LPLU is enabled, we should disable SmartSpeed */
-+ ret_val = phy->ops.read_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ &data);
-+ if (ret_val)
-+ goto out;
++ do {
++ udelay(1);
++ /* Steps */
++ ret_val = e1000_flash_cycle_init_ich8lan(hw);
++ if (ret_val != E1000_SUCCESS)
++ break;
+
-+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
-+ data);
-+ }
++ hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
++ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
++ hsflctl.hsf_ctrl.fldbcount = size - 1;
++ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
++ ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
-+out:
-+ return ret_val;
-+}
++ ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+
-+/**
-+ * e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1
-+ * @hw: pointer to the HW structure
-+ * @bank: pointer to the variable that returns the active bank
-+ *
-+ * Reads signature byte from the NVM using the flash access registers.
-+ **/
-+static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
-+{
-+ s32 ret_val = E1000_SUCCESS;
-+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ /* flash bank size is in words */
-+ u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
-+ u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
-+ u8 bank_high_byte = 0;
++ ret_val = e1000_flash_cycle_ich8lan(hw,
++ ICH_FLASH_READ_COMMAND_TIMEOUT);
+
-+ if (hw->mac.type != e1000_ich10lan) {
-+ if (E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_SEC1VAL)
-+ *bank = 1;
-+ else
-+ *bank = 0;
-+ } else if (hw->dev_spec != NULL) {
+ /*
-+ * Make sure the signature for bank 0 is valid,
-+ * if not check for bank1
++ * Check if FCERR is set to 1, if set to 1, clear it
++ * and try the whole sequence a few more times, else
++ * read in (shift in) the Flash Data0, the order is
++ * least significant byte first msb to lsb
+ */
-+ e1000_read_flash_byte_ich8lan(hw, act_offset, &bank_high_byte);
-+ if ((bank_high_byte & 0xC0) == 0x80) {
-+ *bank = 0;
++ if (ret_val == E1000_SUCCESS) {
++ flash_data = er32flash(ICH_FLASH_FDATA0);
++ if (size == 1)
++ *data = (u8)(flash_data & 0x000000FF);
++ else if (size == 2)
++ *data = (u16)(flash_data & 0x0000FFFF);
++ break;
+ } else {
+ /*
-+ * find if segment 1 is valid by verifying
-+ * bit 15:14 = 10b in word 0x13
++ * If we've gotten here, then things are probably
++ * completely hosed, but if the error condition is
++ * detected, it won't hurt to give it another try...
++ * ICH_FLASH_CYCLE_REPEAT_COUNT times.
+ */
-+ e1000_read_flash_byte_ich8lan(hw,
-+ act_offset + bank1_offset,
-+ &bank_high_byte);
-+
-+ /* bank1 has a valid signature equivalent to SEC1V */
-+ if ((bank_high_byte & 0xC0) == 0x80) {
-+ *bank = 1;
-+ } else {
-+ DEBUGOUT("ERROR: EEPROM not present\n");
-+ ret_val = -E1000_ERR_NVM;
++ hsfsts.regval = er16flash(
++ ICH_FLASH_HSFSTS);
++ if (hsfsts.hsf_status.flcerr == 1) {
++ /* Repeat for some time before giving up. */
++ continue;
++ } else if (hsfsts.hsf_status.flcdone == 0) {
++ e_dbg("Timeout error - flash cycle "
++ "did not complete.");
++ break;
+ }
+ }
-+ } else {
-+ DEBUGOUT("DEV SPEC is NULL\n");
-+ ret_val = -E1000_ERR_NVM;
-+ }
-+
++ } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
++
++out:
+ return ret_val;
+}
+
+/**
-+ * e1000_read_nvm_ich8lan - Read word(s) from the NVM
++ * e1000_write_nvm_ich8lan - Write word(s) to the NVM
+ * @hw: pointer to the HW structure
-+ * @offset: The offset (in bytes) of the word(s) to read.
-+ * @words: Size of data to read in words
-+ * @data: Pointer to the word(s) to read at offset.
++ * @offset: The offset (in bytes) of the word(s) to write.
++ * @words: Size of data to write in words
++ * @data: Pointer to the word(s) to write at offset.
+ *
-+ * Reads a word(s) from the NVM using the flash access registers.
++ * Writes a byte or word to the NVM using the flash access registers.
+ **/
-+static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
-+ u16 *data)
++static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
++ u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ struct e1000_dev_spec_ich8lan *dev_spec;
-+ u32 act_offset;
++ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ s32 ret_val = E1000_SUCCESS;
-+ u32 bank = 0;
-+ u16 i, word;
-+
-+ DEBUGFUNC("e1000_read_nvm_ich8lan");
-+
-+ dev_spec = (struct e1000_dev_spec_ich8lan *)hw->dev_spec;
-+
-+ if (!dev_spec) {
-+ DEBUGOUT("dev_spec pointer is set to NULL.\n");
-+ ret_val = -E1000_ERR_CONFIG;
-+ goto out;
-+ }
++ u16 i;
+
+ if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
+ (words == 0)) {
-+ DEBUGOUT("nvm parameter(s) out of bounds\n");
++ e_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+ if (ret_val)
+ goto out;
+
-+ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
-+ if (ret_val != E1000_SUCCESS)
-+ goto out;
-+
-+ act_offset = (bank) ? nvm->flash_bank_size : 0;
-+ act_offset += offset;
-+
+ for (i = 0; i < words; i++) {
-+ if ((dev_spec->shadow_ram) &&
-+ (dev_spec->shadow_ram[offset+i].modified)) {
-+ data[i] = dev_spec->shadow_ram[offset+i].value;
-+ } else {
-+ ret_val = e1000_read_flash_word_ich8lan(hw,
-+ act_offset + i,
-+ &word);
-+ if (ret_val)
-+ break;
-+ data[i] = word;
-+ }
++ dev_spec->shadow_ram[offset+i].modified = true;
++ dev_spec->shadow_ram[offset+i].value = data[i];
+ }
+
+ nvm->ops.release(hw);
+}
+
+/**
-+ * e1000_flash_cycle_init_ich8lan - Initialize flash
++ * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM
+ * @hw: pointer to the HW structure
+ *
-+ * This function does initial flash setup so that a new read/write/erase cycle
-+ * can be started.
++ * The NVM checksum is updated by calling the generic update_nvm_checksum,
++ * which writes the checksum to the shadow ram. The changes in the shadow
++ * ram are then committed to the EEPROM by processing each bank at a time
++ * checking for the modified bit and writing only the pending changes.
++ * After a successful commit, the shadow ram is cleared and is ready for
++ * future writes.
+ **/
-+static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
++static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
+{
-+ union ich8_hws_flash_status hsfsts;
-+ s32 ret_val = -E1000_ERR_NVM;
-+ s32 i = 0;
-+
-+ DEBUGFUNC("e1000_flash_cycle_init_ich8lan");
++ struct e1000_nvm_info *nvm = &hw->nvm;
++ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
++ u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
++ s32 ret_val;
++ u16 data;
+
-+ hsfsts.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
++ ret_val = e1000e_update_nvm_checksum_generic(hw);
++ if (ret_val)
++ goto out;
+
-+ /* Check if the flash descriptor is valid */
-+ if (hsfsts.hsf_status.fldesvalid == 0) {
-+ DEBUGOUT("Flash descriptor invalid. "
-+ "SW Sequencing must be used.");
++ if (nvm->type != e1000_nvm_flash_sw)
+ goto out;
-+ }
+
-+ /* Clear FCERR and DAEL in hw status by writing 1 */
-+ hsfsts.hsf_status.flcerr = 1;
-+ hsfsts.hsf_status.dael = 1;
-+
-+ E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
++ ret_val = nvm->ops.acquire(hw);
++ if (ret_val)
++ goto out;
+
+ /*
-+ * Either we should have a hardware SPI cycle in progress
-+ * bit to check against, in order to start a new cycle or
-+ * FDONE bit should be changed in the hardware so that it
-+ * is 1 after hardware reset, which can then be used as an
-+ * indication whether a cycle is in progress or has been
-+ * completed.
++ * We're writing to the opposite bank so if we're on bank 1,
++ * write to bank 0 etc. We also need to erase the segment that
++ * is going to be written
+ */
++ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
++ if (ret_val != E1000_SUCCESS) {
++ nvm->ops.release(hw);
++ goto out;
++ }
+
-+ if (hsfsts.hsf_status.flcinprog == 0) {
-+ /*
-+ * There is no cycle running at present,
-+ * so we can start a cycle.
-+ * Begin by setting Flash Cycle Done.
-+ */
-+ hsfsts.hsf_status.flcdone = 1;
-+ E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
-+ ret_val = E1000_SUCCESS;
++ if (bank == 0) {
++ new_bank_offset = nvm->flash_bank_size;
++ old_bank_offset = 0;
++ ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
++ if (ret_val) {
++ nvm->ops.release(hw);
++ goto out;
++ }
+ } else {
++ old_bank_offset = nvm->flash_bank_size;
++ new_bank_offset = 0;
++ ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
++ if (ret_val) {
++ nvm->ops.release(hw);
++ goto out;
++ }
++ }
++
++ for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
+ /*
-+ * Otherwise poll for sometime so the current
-+ * cycle has a chance to end before giving up.
++ * Determine whether to write the value stored
++ * in the other NVM bank or a modified value stored
++ * in the shadow RAM
+ */
-+ for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
-+ hsfsts.regval = E1000_READ_FLASH_REG16(hw,
-+ ICH_FLASH_HSFSTS);
-+ if (hsfsts.hsf_status.flcinprog == 0) {
-+ ret_val = E1000_SUCCESS;
-+ break;
-+ }
-+ usec_delay(1);
-+ }
-+ if (ret_val == E1000_SUCCESS) {
-+ /*
-+ * Successful in waiting for previous cycle to timeout,
-+ * now set the Flash Cycle Done.
-+ */
-+ hsfsts.hsf_status.flcdone = 1;
-+ E1000_WRITE_FLASH_REG16(hw,
-+ ICH_FLASH_HSFSTS,
-+ hsfsts.regval);
++ if (dev_spec->shadow_ram[i].modified) {
++ data = dev_spec->shadow_ram[i].value;
+ } else {
-+ DEBUGOUT("Flash controller busy, cannot get access");
++ ret_val = e1000_read_flash_word_ich8lan(hw, i +
++ old_bank_offset,
++ &data);
++ if (ret_val)
++ break;
+ }
-+ }
-+
-+out:
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_flash_cycle_ich8lan - Starts flash cycle (read/write/erase)
-+ * @hw: pointer to the HW structure
-+ * @timeout: maximum time to wait for completion
-+ *
-+ * This function starts a flash cycle and waits for its completion.
-+ **/
-+static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
-+{
-+ union ich8_hws_flash_ctrl hsflctl;
-+ union ich8_hws_flash_status hsfsts;
-+ s32 ret_val = -E1000_ERR_NVM;
-+ u32 i = 0;
+
-+ DEBUGFUNC("e1000_flash_cycle_ich8lan");
++ /*
++ * If the word is 0x13, then make sure the signature bits
++ * (15:14) are 11b until the commit has completed.
++ * This will allow us to write 10b which indicates the
++ * signature is valid. We want to do this after the write
++ * has completed so that we don't mark the segment valid
++ * while the write is still in progress
++ */
++ if (i == E1000_ICH_NVM_SIG_WORD)
++ data |= E1000_ICH_NVM_SIG_MASK;
+
-+ /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
-+ hsflctl.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
-+ hsflctl.hsf_ctrl.flcgo = 1;
-+ E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
++ /* Convert offset to bytes. */
++ act_offset = (i + new_bank_offset) << 1;
+
-+ /* wait till FDONE bit is set to 1 */
-+ do {
-+ hsfsts.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-+ if (hsfsts.hsf_status.flcdone == 1)
++ udelay(100);
++ /* Write the bytes to the new bank. */
++ ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
++ act_offset,
++ (u8)data);
++ if (ret_val)
+ break;
-+ usec_delay(1);
-+ } while (i++ < timeout);
-+
-+ if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0)
-+ ret_val = E1000_SUCCESS;
+
-+ return ret_val;
-+}
++ udelay(100);
++ ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
++ act_offset + 1,
++ (u8)(data >> 8));
++ if (ret_val)
++ break;
++ }
+
-+/**
-+ * e1000_read_flash_word_ich8lan - Read word from flash
-+ * @hw: pointer to the HW structure
-+ * @offset: offset to data location
-+ * @data: pointer to the location for storing the data
-+ *
-+ * Reads the flash word at offset into data. Offset is converted
-+ * to bytes before read.
-+ **/
-+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
-+ u16 *data)
-+{
-+ s32 ret_val;
++ /*
++ * Don't bother writing the segment valid bits if sector
++ * programming failed.
++ */
++ if (ret_val) {
++ e_dbg("Flash commit failed.\n");
++ nvm->ops.release(hw);
++ goto out;
++ }
+
-+ DEBUGFUNC("e1000_read_flash_word_ich8lan");
++ /*
++ * Finally validate the new segment by setting bit 15:14
++ * to 10b in word 0x13 , this can be done without an
++ * erase as well since these bits are 11 to start with
++ * and we need to change bit 14 to 0b
++ */
++ act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
++ ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
++ if (ret_val) {
++ nvm->ops.release(hw);
++ goto out;
++ }
++ data &= 0xBFFF;
++ ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
++ act_offset * 2 + 1,
++ (u8)(data >> 8));
++ if (ret_val) {
++ nvm->ops.release(hw);
++ goto out;
++ }
+
-+ if (!data) {
-+ ret_val = -E1000_ERR_NVM;
++ /*
++ * And invalidate the previously valid segment by setting
++ * its signature word (0x13) high_byte to 0b. This can be
++ * done without an erase because flash erase sets all bits
++ * to 1's. We can write 1's to 0's without an erase
++ */
++ act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
++ ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
++ if (ret_val) {
++ nvm->ops.release(hw);
+ goto out;
+ }
+
-+ /* Must convert offset into bytes. */
-+ offset <<= 1;
++ /* Great! Everything worked, we can now clear the cached entries. */
++ for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
++ dev_spec->shadow_ram[i].modified = false;
++ dev_spec->shadow_ram[i].value = 0xFFFF;
++ }
+
-+ ret_val = e1000_read_flash_data_ich8lan(hw, offset, 2, data);
++ nvm->ops.release(hw);
++
++ /*
++ * Reload the EEPROM, or else modifications will not appear
++ * until after the next adapter reset.
++ */
++ nvm->ops.reload(hw);
++ msleep(10);
+
+out:
++ if (ret_val)
++ e_dbg("NVM update error: %d\n", ret_val);
++
+ return ret_val;
+}
+
+/**
-+ * e1000_read_flash_byte_ich8lan - Read byte from flash
++ * e1000_validate_nvm_checksum_ich8lan - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
-+ * @offset: The offset of the byte to read.
-+ * @data: Pointer to a byte to store the value read.
+ *
-+ * Reads a single byte from the NVM using the flash access registers.
++ * Check to see if checksum needs to be fixed by reading bit 6 in word 0x19.
++ * If the bit is 0, that the EEPROM had been modified, but the checksum was not
++ * calculated, in which case we need to calculate the checksum and set bit 6.
+ **/
-+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
-+ u8* data)
++static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
-+ u16 word = 0;
++ u16 data;
+
-+ ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word);
++ /*
++ * Read 0x19 and check bit 6. If this bit is 0, the checksum
++ * needs to be fixed. This bit is an indication that the NVM
++ * was prepared by OEM software and did not calculate the
++ * checksum...a likely scenario.
++ */
++ ret_val = e1000_read_nvm(hw, 0x19, 1, &data);
+ if (ret_val)
+ goto out;
+
-+ *data = (u8)word;
++ if ((data & 0x40) == 0) {
++ data |= 0x40;
++ ret_val = e1000_write_nvm(hw, 0x19, 1, &data);
++ if (ret_val)
++ goto out;
++ ret_val = e1000e_update_nvm_checksum(hw);
++ if (ret_val)
++ goto out;
++ }
++
++ ret_val = e1000e_validate_nvm_checksum_generic(hw);
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_read_flash_data_ich8lan - Read byte or word from NVM
++ * e1000_write_flash_data_ich8lan - Writes bytes to the NVM
+ * @hw: pointer to the HW structure
-+ * @offset: The offset (in bytes) of the byte or word to read.
++ * @offset: The offset (in bytes) of the byte/word to read.
+ * @size: Size of data to read, 1=byte 2=word
-+ * @data: Pointer to the word to store the value read.
++ * @data: The byte(s) to write to the NVM.
+ *
-+ * Reads a byte or word from the NVM using the flash access registers.
++ * Writes one/two bytes to the NVM using the flash access registers.
+ **/
-+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
-+ u8 size, u16* data)
++static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
++ u8 size, u16 data)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ s32 ret_val = -E1000_ERR_NVM;
+ u8 count = 0;
+
-+ DEBUGFUNC("e1000_read_flash_data_ich8lan");
-+
-+ if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
++ if (size < 1 || size > 2 || data > size * 0xff ||
++ offset > ICH_FLASH_LINEAR_ADDR_MASK)
+ goto out;
+
+ flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+ hw->nvm.flash_base_addr;
+
+ do {
-+ usec_delay(1);
++ udelay(1);
+ /* Steps */
+ ret_val = e1000_flash_cycle_init_ich8lan(hw);
+ if (ret_val != E1000_SUCCESS)
+ break;
+
-+ hsflctl.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
++ hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
-+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
-+ E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
++ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
++ ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
++
++ ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
++
++ if (size == 1)
++ flash_data = (u32)data & 0x00FF;
++ else
++ flash_data = (u32)data;
+
-+ E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_addr);
++ ew32flash(ICH_FLASH_FDATA0, flash_data);
+
++ /*
++ * check if FCERR is set to 1 , if set to 1, clear it
++ * and try the whole sequence a few more times else done
++ */
+ ret_val = e1000_flash_cycle_ich8lan(hw,
-+ ICH_FLASH_READ_COMMAND_TIMEOUT);
++ ICH_FLASH_WRITE_COMMAND_TIMEOUT);
++ if (ret_val == E1000_SUCCESS)
++ break;
+
+ /*
-+ * Check if FCERR is set to 1, if set to 1, clear it
-+ * and try the whole sequence a few more times, else
-+ * read in (shift in) the Flash Data0, the order is
-+ * least significant byte first msb to lsb
++ * If we're here, then things are most likely
++ * completely hosed, but if the error condition
++ * is detected, it won't hurt to give it another
++ * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
+ */
-+ if (ret_val == E1000_SUCCESS) {
-+ flash_data = E1000_READ_FLASH_REG(hw, ICH_FLASH_FDATA0);
-+ if (size == 1) {
-+ *data = (u8)(flash_data & 0x000000FF);
-+ } else if (size == 2) {
-+ *data = (u16)(flash_data & 0x0000FFFF);
-+ }
++ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
++ if (hsfsts.hsf_status.flcerr == 1) {
++ /* Repeat for some time before giving up. */
++ continue;
++ } else if (hsfsts.hsf_status.flcdone == 0) {
++ e_dbg("Timeout error - flash cycle "
++ "did not complete.");
+ break;
-+ } else {
-+ /*
-+ * If we've gotten here, then things are probably
-+ * completely hosed, but if the error condition is
-+ * detected, it won't hurt to give it another try...
-+ * ICH_FLASH_CYCLE_REPEAT_COUNT times.
-+ */
-+ hsfsts.regval = E1000_READ_FLASH_REG16(hw,
-+ ICH_FLASH_HSFSTS);
-+ if (hsfsts.hsf_status.flcerr == 1) {
-+ /* Repeat for some time before giving up. */
-+ continue;
-+ } else if (hsfsts.hsf_status.flcdone == 0) {
-+ DEBUGOUT("Timeout error - flash cycle "
-+ "did not complete.");
-+ break;
-+ }
+ }
+ } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+}
+
+/**
-+ * e1000_write_nvm_ich8lan - Write word(s) to the NVM
++ * e1000_write_flash_byte_ich8lan - Write a single byte to NVM
+ * @hw: pointer to the HW structure
-+ * @offset: The offset (in bytes) of the word(s) to write.
-+ * @words: Size of data to write in words
-+ * @data: Pointer to the word(s) to write at offset.
++ * @offset: The index of the byte to read.
++ * @data: The byte to write to the NVM.
+ *
-+ * Writes a byte or word to the NVM using the flash access registers.
++ * Writes a single byte to the NVM using the flash access registers.
+ **/
-+static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
-+ u16 *data)
++static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
++ u8 data)
+{
-+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ struct e1000_dev_spec_ich8lan *dev_spec;
-+ s32 ret_val = E1000_SUCCESS;
-+ u16 i;
++ u16 word = (u16)data;
+
-+ DEBUGFUNC("e1000_write_nvm_ich8lan");
++ return e1000_write_flash_data_ich8lan(hw, offset, 1, word);
++}
+
-+ dev_spec = (struct e1000_dev_spec_ich8lan *)hw->dev_spec;
++/**
++ * e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM
++ * @hw: pointer to the HW structure
++ * @offset: The offset of the byte to write.
++ * @byte: The byte to write to the NVM.
++ *
++ * Writes a single byte to the NVM using the flash access registers.
++ * Goes through a retry algorithm before giving up.
++ **/
++static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
++ u32 offset, u8 byte)
++{
++ s32 ret_val;
++ u16 program_retries;
+
-+ if (!dev_spec) {
-+ DEBUGOUT("dev_spec pointer is set to NULL.\n");
-+ ret_val = -E1000_ERR_CONFIG;
++ ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
++ if (ret_val == E1000_SUCCESS)
+ goto out;
-+ }
+
-+ if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
-+ (words == 0)) {
-+ DEBUGOUT("nvm parameter(s) out of bounds\n");
-+ ret_val = -E1000_ERR_NVM;
-+ goto out;
++ for (program_retries = 0; program_retries < 100; program_retries++) {
++ e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
++ udelay(100);
++ ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
++ if (ret_val == E1000_SUCCESS)
++ break;
+ }
-+
-+ ret_val = nvm->ops.acquire(hw);
-+ if (ret_val)
++ if (program_retries == 100) {
++ ret_val = -E1000_ERR_NVM;
+ goto out;
-+
-+ for (i = 0; i < words; i++) {
-+ dev_spec->shadow_ram[offset+i].modified = true;
-+ dev_spec->shadow_ram[offset+i].value = data[i];
+ }
+
-+ nvm->ops.release(hw);
-+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM
++ * e1000_erase_flash_bank_ich8lan - Erase a bank (4k) from NVM
+ * @hw: pointer to the HW structure
++ * @bank: 0 for first bank, 1 for second bank, etc.
+ *
-+ * The NVM checksum is updated by calling the generic update_nvm_checksum,
-+ * which writes the checksum to the shadow ram. The changes in the shadow
-+ * ram are then committed to the EEPROM by processing each bank at a time
-+ * checking for the modified bit and writing only the pending changes.
-+ * After a successful commit, the shadow ram is cleared and is ready for
-+ * future writes.
++ * Erases the bank specified. Each bank is a 4k block. Banks are 0 based.
++ * bank N is 4096 * N + flash_reg_addr.
+ **/
-+static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
++static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ struct e1000_dev_spec_ich8lan *dev_spec;
-+ u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
-+ s32 ret_val;
-+ u16 data;
-+
-+ DEBUGFUNC("e1000_update_nvm_checksum_ich8lan");
-+
-+ dev_spec = (struct e1000_dev_spec_ich8lan *)hw->dev_spec;
-+
-+ ret_val = e1000_update_nvm_checksum_generic(hw);
-+ if (ret_val)
-+ goto out;
-+
-+ if (nvm->type != e1000_nvm_flash_sw)
-+ goto out;
++ union ich8_hws_flash_status hsfsts;
++ union ich8_hws_flash_ctrl hsflctl;
++ u32 flash_linear_addr;
++ /* bank size is in 16bit words - adjust to bytes */
++ u32 flash_bank_size = nvm->flash_bank_size * 2;
++ s32 ret_val = E1000_SUCCESS;
++ s32 count = 0;
++ s32 j, iteration, sector_size;
+
-+ ret_val = nvm->ops.acquire(hw);
-+ if (ret_val)
-+ goto out;
++ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+
+ /*
-+ * We're writing to the opposite bank so if we're on bank 1,
-+ * write to bank 0 etc. We also need to erase the segment that
-+ * is going to be written
++ * Determine HW Sector size: Read BERASE bits of hw flash status
++ * register
++ * 00: The Hw sector is 256 bytes, hence we need to erase 16
++ * consecutive sectors. The start index for the nth Hw sector
++ * can be calculated as = bank * 4096 + n * 256
++ * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
++ * The start index for the nth Hw sector can be calculated
++ * as = bank * 4096
++ * 10: The Hw sector is 8K bytes, nth sector = bank * 8192
++ * (ich9 only, otherwise error condition)
++ * 11: The Hw sector is 64K bytes, nth sector = bank * 65536
+ */
-+ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
-+ if (ret_val != E1000_SUCCESS)
++ switch (hsfsts.hsf_status.berasesz) {
++ case 0:
++ /* Hw sector size 256 */
++ sector_size = ICH_FLASH_SEG_SIZE_256;
++ iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_256;
++ break;
++ case 1:
++ sector_size = ICH_FLASH_SEG_SIZE_4K;
++ iteration = 1;
++ break;
++ case 2:
++ if (hw->mac.type == e1000_ich9lan) {
++ sector_size = ICH_FLASH_SEG_SIZE_8K;
++ iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_8K;
++ } else {
++ ret_val = -E1000_ERR_NVM;
++ goto out;
++ }
++ break;
++ case 3:
++ sector_size = ICH_FLASH_SEG_SIZE_64K;
++ iteration = 1;
++ break;
++ default:
++ ret_val = -E1000_ERR_NVM;
+ goto out;
-+
-+ if (bank == 0) {
-+ new_bank_offset = nvm->flash_bank_size;
-+ old_bank_offset = 0;
-+ e1000_erase_flash_bank_ich8lan(hw, 1);
-+ } else {
-+ old_bank_offset = nvm->flash_bank_size;
-+ new_bank_offset = 0;
-+ e1000_erase_flash_bank_ich8lan(hw, 0);
+ }
+
-+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
-+ /*
-+ * Determine whether to write the value stored
-+ * in the other NVM bank or a modified value stored
-+ * in the shadow RAM
-+ */
-+ if (dev_spec->shadow_ram[i].modified) {
-+ data = dev_spec->shadow_ram[i].value;
-+ } else {
-+ e1000_read_flash_word_ich8lan(hw,
-+ i + old_bank_offset,
-+ &data);
-+ }
++ /* Start with the base address, then add the sector offset. */
++ flash_linear_addr = hw->nvm.flash_base_addr;
++ flash_linear_addr += (bank) ? (sector_size * iteration) : 0;
+
-+ /*
-+ * If the word is 0x13, then make sure the signature bits
-+ * (15:14) are 11b until the commit has completed.
-+ * This will allow us to write 10b which indicates the
-+ * signature is valid. We want to do this after the write
-+ * has completed so that we don't mark the segment valid
-+ * while the write is still in progress
-+ */
-+ if (i == E1000_ICH_NVM_SIG_WORD)
-+ data |= E1000_ICH_NVM_SIG_MASK;
++ for (j = 0; j < iteration ; j++) {
++ do {
++ /* Steps */
++ ret_val = e1000_flash_cycle_init_ich8lan(hw);
++ if (ret_val)
++ goto out;
+
-+ /* Convert offset to bytes. */
-+ act_offset = (i + new_bank_offset) << 1;
++ /*
++ * Write a value 11 (block Erase) in Flash
++ * Cycle field in hw flash control
++ */
++ hsflctl.regval = er16flash(
++ ICH_FLASH_HSFCTL);
++ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
++ ew16flash(ICH_FLASH_HSFCTL,
++ hsflctl.regval);
+
-+ usec_delay(100);
-+ /* Write the bytes to the new bank. */
-+ ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
-+ act_offset,
-+ (u8)data);
-+ if (ret_val)
-+ break;
++ /*
++ * Write the last 24 bits of an index within the
++ * block into Flash Linear address field in Flash
++ * Address.
++ */
++ flash_linear_addr += (j * sector_size);
++ ew32flash(ICH_FLASH_FADDR,
++ flash_linear_addr);
+
-+ usec_delay(100);
-+ ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
-+ act_offset + 1,
-+ (u8)(data >> 8));
-+ if (ret_val)
-+ break;
-+ }
++ ret_val = e1000_flash_cycle_ich8lan(hw,
++ ICH_FLASH_ERASE_COMMAND_TIMEOUT);
++ if (ret_val == E1000_SUCCESS)
++ break;
+
-+ /*
-+ * Don't bother writing the segment valid bits if sector
-+ * programming failed.
-+ */
-+ if (ret_val) {
-+ /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
-+ DEBUGOUT("Flash commit failed.\n");
-+ nvm->ops.release(hw);
-+ goto out;
++ /*
++ * Check if FCERR is set to 1. If 1,
++ * clear it and try the whole sequence
++ * a few more times else Done
++ */
++ hsfsts.regval = er16flash(
++ ICH_FLASH_HSFSTS);
++ if (hsfsts.hsf_status.flcerr == 1)
++ /* repeat for some time before giving up */
++ continue;
++ else if (hsfsts.hsf_status.flcdone == 0)
++ goto out;
++ } while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
+ }
+
-+ /*
-+ * Finally validate the new segment by setting bit 15:14
-+ * to 10b in word 0x13 , this can be done without an
-+ * erase as well since these bits are 11 to start with
-+ * and we need to change bit 14 to 0b
-+ */
-+ act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
-+ e1000_read_flash_word_ich8lan(hw, act_offset, &data);
-+ data &= 0xBFFF;
-+ ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
-+ act_offset * 2 + 1,
-+ (u8)(data >> 8));
++out:
++ return ret_val;
++}
++
++/**
++ * e1000_valid_led_default_ich8lan - Set the default LED settings
++ * @hw: pointer to the HW structure
++ * @data: Pointer to the LED settings
++ *
++ * Reads the LED default settings from the NVM to data. If the NVM LED
++ * settings is all 0's or F's, set the LED default to a valid LED default
++ * setting.
++ **/
++static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
++{
++ s32 ret_val;
++
++ ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
-+ nvm->ops.release(hw);
++ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
-+ /*
-+ * And invalidate the previously valid segment by setting
-+ * its signature word (0x13) high_byte to 0b. This can be
-+ * done without an erase because flash erase sets all bits
-+ * to 1's. We can write 1's to 0's without an erase
-+ */
-+ act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
-+ ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
-+ if (ret_val) {
-+ nvm->ops.release(hw);
-+ goto out;
-+ }
-+
-+ /* Great! Everything worked, we can now clear the cached entries. */
-+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
-+ dev_spec->shadow_ram[i].modified = false;
-+ dev_spec->shadow_ram[i].value = 0xFFFF;
-+ }
-+
-+ nvm->ops.release(hw);
-+
-+ /*
-+ * Reload the EEPROM, or else modifications will not appear
-+ * until after the next adapter reset.
-+ */
-+ nvm->ops.reload(hw);
-+ msec_delay(10);
++ if (*data == ID_LED_RESERVED_0000 ||
++ *data == ID_LED_RESERVED_FFFF)
++ *data = ID_LED_DEFAULT_ICH8LAN;
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_validate_nvm_checksum_ich8lan - Validate EEPROM checksum
++ * e1000_id_led_init_pchlan - store LED configurations
+ * @hw: pointer to the HW structure
+ *
-+ * Check to see if checksum needs to be fixed by reading bit 6 in word 0x19.
-+ * If the bit is 0, that the EEPROM had been modified, but the checksum was
-+ * not calculated, in which case we need to calculate the checksum and set
-+ * bit 6.
++ * PCH does not control LEDs via the LEDCTL register, rather it uses
++ * the PHY LED configuration register.
++ *
++ * PCH also does not have an "always on" or "always off" mode which
++ * complicates the ID feature. Instead of using the "on" mode to indicate
++ * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()),
++ * use "link_up" mode. The LEDs will still ID on request if there is no
++ * link based on logic in e1000_led_[on|off]_pchlan().
+ **/
-+static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
++static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
+{
-+ s32 ret_val = E1000_SUCCESS;
-+ u16 data;
-+
-+ DEBUGFUNC("e1000_validate_nvm_checksum_ich8lan");
++ struct e1000_mac_info *mac = &hw->mac;
++ s32 ret_val;
++ const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP;
++ const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT;
++ u16 data, i, temp, shift;
+
-+ /*
-+ * Read 0x19 and check bit 6. If this bit is 0, the checksum
-+ * needs to be fixed. This bit is an indication that the NVM
-+ * was prepared by OEM software and did not calculate the
-+ * checksum...a likely scenario.
-+ */
-+ ret_val = hw->nvm.ops.read(hw, 0x19, 1, &data);
++ /* Get default ID LED modes */
++ ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+ if (ret_val)
+ goto out;
+
-+ if ((data & 0x40) == 0) {
-+ data |= 0x40;
-+ ret_val = hw->nvm.ops.write(hw, 0x19, 1, &data);
-+ if (ret_val)
-+ goto out;
-+ ret_val = hw->nvm.ops.update(hw);
-+ if (ret_val)
-+ goto out;
-+ }
++ mac->ledctl_default = er32(LEDCTL);
++ mac->ledctl_mode1 = mac->ledctl_default;
++ mac->ledctl_mode2 = mac->ledctl_default;
+
-+ ret_val = e1000_validate_nvm_checksum_generic(hw);
++ for (i = 0; i < 4; i++) {
++ temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK;
++ shift = (i * 5);
++ switch (temp) {
++ case ID_LED_ON1_DEF2:
++ case ID_LED_ON1_ON2:
++ case ID_LED_ON1_OFF2:
++ mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
++ mac->ledctl_mode1 |= (ledctl_on << shift);
++ break;
++ case ID_LED_OFF1_DEF2:
++ case ID_LED_OFF1_ON2:
++ case ID_LED_OFF1_OFF2:
++ mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
++ mac->ledctl_mode1 |= (ledctl_off << shift);
++ break;
++ default:
++ /* Do nothing */
++ break;
++ }
++ switch (temp) {
++ case ID_LED_DEF1_ON2:
++ case ID_LED_ON1_ON2:
++ case ID_LED_OFF1_ON2:
++ mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
++ mac->ledctl_mode2 |= (ledctl_on << shift);
++ break;
++ case ID_LED_DEF1_OFF2:
++ case ID_LED_ON1_OFF2:
++ case ID_LED_OFF1_OFF2:
++ mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
++ mac->ledctl_mode2 |= (ledctl_off << shift);
++ break;
++ default:
++ /* Do nothing */
++ break;
++ }
++ }
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
++ * e1000_get_bus_info_ich8lan - Get/Set the bus type and width
+ * @hw: pointer to the HW structure
+ *
-+ * To prevent malicious write/erase of the NVM, set it to be read-only
-+ * so that the hardware ignores all write/erase cycles of the NVM via
-+ * the flash control registers. The shadow-ram copy of the NVM will
-+ * still be updated, however any updates to this copy will not stick
-+ * across driver reloads.
++ * ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
++ * register, so the the bus width is hard coded.
+ **/
-+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
++static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
+{
-+ union ich8_flash_protected_range pr0;
-+ union ich8_hws_flash_status hsfsts;
-+ u32 gfpreg;
++ struct e1000_bus_info *bus = &hw->bus;
+ s32 ret_val;
+
-+ ret_val = e1000_acquire_swflag_ich8lan(hw);
-+ if (ret_val)
-+ return;
-+
-+ gfpreg = E1000_READ_FLASH_REG(hw, ICH_FLASH_GFPREG);
-+
-+ /* Write-protect GbE Sector of NVM */
-+ pr0.regval = E1000_READ_FLASH_REG(hw, ICH_FLASH_PR0);
-+ pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
-+ pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
-+ pr0.range.wpe = true;
-+ E1000_WRITE_FLASH_REG(hw, ICH_FLASH_PR0, pr0.regval);
++ ret_val = e1000e_get_bus_info_pcie(hw);
+
+ /*
-+ * Lock down a subset of GbE Flash Control Registers, e.g.
-+ * PR0 to prevent the write-protection from being lifted.
-+ * Once FLOCKDN is set, the registers protected by it cannot
-+ * be written until FLOCKDN is cleared by a hardware reset.
++ * ICH devices are "PCI Express"-ish. They have
++ * a configuration space, but do not contain
++ * PCI Express Capability registers, so bus width
++ * must be hardcoded.
+ */
-+ hsfsts.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-+ hsfsts.hsf_status.flockdn = true;
-+ E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
++ if (bus->width == e1000_bus_width_unknown)
++ bus->width = e1000_bus_width_pcie_x1;
+
-+ e1000_release_swflag_ich8lan(hw);
++ return ret_val;
+}
+
+/**
-+ * e1000_write_flash_data_ich8lan - Writes bytes to the NVM
++ * e1000_reset_hw_ich8lan - Reset the hardware
+ * @hw: pointer to the HW structure
-+ * @offset: The offset (in bytes) of the byte/word to read.
-+ * @size: Size of data to read, 1=byte 2=word
-+ * @data: The byte(s) to write to the NVM.
+ *
-+ * Writes one/two bytes to the NVM using the flash access registers.
++ * Does a full reset of the hardware which includes a reset of the PHY and
++ * MAC.
+ **/
-+static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
-+ u8 size, u16 data)
++static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
+{
-+ union ich8_hws_flash_status hsfsts;
-+ union ich8_hws_flash_ctrl hsflctl;
-+ u32 flash_linear_addr;
-+ u32 flash_data = 0;
-+ s32 ret_val = -E1000_ERR_NVM;
-+ u8 count = 0;
-+
-+ DEBUGFUNC("e1000_write_ich8_data");
++ u32 ctrl, icr, kab;
++ s32 ret_val;
+
-+ if (size < 1 || size > 2 || data > size * 0xff ||
-+ offset > ICH_FLASH_LINEAR_ADDR_MASK)
-+ goto out;
++ /*
++ * Prevent the PCI-E bus from sticking if there is no TLP connection
++ * on the last TLP read/write transaction when MAC is reset.
++ */
++ ret_val = e1000e_disable_pcie_master(hw);
++ if (ret_val)
++ e_dbg("PCI-E Master disable polling has failed.\n");
+
-+ flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
-+ hw->nvm.flash_base_addr;
++ e_dbg("Masking off all interrupts\n");
++ ew32(IMC, 0xffffffff);
+
-+ do {
-+ usec_delay(1);
-+ /* Steps */
-+ ret_val = e1000_flash_cycle_init_ich8lan(hw);
-+ if (ret_val != E1000_SUCCESS)
-+ break;
++ /*
++ * Disable the Transmit and Receive units. Then delay to allow
++ * any pending transactions to complete before we hit the MAC
++ * with the global reset.
++ */
++ ew32(RCTL, 0);
++ ew32(TCTL, E1000_TCTL_PSP);
++ e1e_flush();
+
-+ hsflctl.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
-+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
-+ hsflctl.hsf_ctrl.fldbcount = size -1;
-+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
-+ E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
++ msleep(10);
+
-+ E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_addr);
++ /* Workaround for ICH8 bit corruption issue in FIFO memory */
++ if (hw->mac.type == e1000_ich8lan) {
++ /* Set Tx and Rx buffer allocation to 8k apiece. */
++ ew32(PBA, E1000_PBA_8K);
++ /* Set Packet Buffer Size to 16k. */
++ ew32(PBS, E1000_PBS_16K);
++ }
+
-+ if (size == 1)
-+ flash_data = (u32)data & 0x00FF;
-+ else
-+ flash_data = (u32)data;
++ ctrl = er32(CTRL);
+
-+ E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data);
++ if (!e1000_check_reset_block(hw) && !hw->phy.reset_disable) {
++ /* Clear PHY Reset Asserted bit */
++ if (hw->mac.type >= e1000_pchlan) {
++ u32 status = er32(STATUS);
++ ew32(STATUS, status &
++ ~E1000_STATUS_PHYRA);
++ }
+
+ /*
-+ * check if FCERR is set to 1 , if set to 1, clear it
-+ * and try the whole sequence a few more times else done
++ * PHY HW reset requires MAC CORE reset at the same
++ * time to make sure the interface between MAC and the
++ * external PHY is reset.
+ */
-+ ret_val = e1000_flash_cycle_ich8lan(hw,
-+ ICH_FLASH_WRITE_COMMAND_TIMEOUT);
-+ if (ret_val == E1000_SUCCESS) {
-+ break;
-+ } else {
++ ctrl |= E1000_CTRL_PHY_RST;
++ }
++ ret_val = e1000_acquire_swflag_ich8lan(hw);
++ e_dbg("Issuing a global reset to ich8lan\n");
++ ew32(CTRL, (ctrl | E1000_CTRL_RST));
++ msleep(20);
++
++ if (!ret_val)
++ e1000_release_swflag_ich8lan(hw);
++
++ if (ctrl & E1000_CTRL_PHY_RST)
++ ret_val = hw->phy.ops.get_cfg_done(hw);
++
++ if (hw->mac.type >= e1000_ich10lan) {
++ e1000_lan_init_done_ich8lan(hw);
++ } else {
++ if (!ret_val) {
++ /* release the swflag because it is not reset by
++ * hardware reset
++ */
++ e1000_release_swflag_ich8lan(hw);
++ }
++
++ ret_val = e1000e_get_auto_rd_done(hw);
++ if (ret_val) {
+ /*
-+ * If we're here, then things are most likely
-+ * completely hosed, but if the error condition
-+ * is detected, it won't hurt to give it another
-+ * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
++ * When auto config read does not complete, do not
++ * return with an error. This can happen in situations
++ * where there is no eeprom and prevents getting link.
+ */
-+ hsfsts.regval = E1000_READ_FLASH_REG16(hw,
-+ ICH_FLASH_HSFSTS);
-+ if (hsfsts.hsf_status.flcerr == 1) {
-+ /* Repeat for some time before giving up. */
-+ continue;
-+ } else if (hsfsts.hsf_status.flcdone == 0) {
-+ DEBUGOUT("Timeout error - flash cycle "
-+ "did not complete.");
-+ break;
-+ }
++ e_dbg("Auto Read Done did not complete\n");
+ }
-+ } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
++ }
+
-+out:
-+ return ret_val;
-+}
++ /*
++ * For PCH, this write will make sure that any noise
++ * will be detected as a CRC error and be dropped rather than show up
++ * as a bad packet to the DMA engine.
++ */
++ if (hw->mac.type == e1000_pchlan)
++ ew32(CRC_OFFSET, 0x65656565);
+
-+/**
-+ * e1000_write_flash_byte_ich8lan - Write a single byte to NVM
-+ * @hw: pointer to the HW structure
-+ * @offset: The index of the byte to read.
-+ * @data: The byte to write to the NVM.
-+ *
-+ * Writes a single byte to the NVM using the flash access registers.
-+ **/
-+static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
-+ u8 data)
-+{
-+ u16 word = (u16)data;
++ ew32(IMC, 0xffffffff);
++ icr = er32(ICR);
++
++ kab = er32(KABGTXD);
++ kab |= E1000_KABGTXD_BGSQLBIAS;
++ ew32(KABGTXD, kab);
+
-+ DEBUGFUNC("e1000_write_flash_byte_ich8lan");
++ if (hw->mac.type == e1000_pchlan)
++ ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+
-+ return e1000_write_flash_data_ich8lan(hw, offset, 1, word);
++ return ret_val;
+}
+
+/**
-+ * e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM
++ * e1000_init_hw_ich8lan - Initialize the hardware
+ * @hw: pointer to the HW structure
-+ * @offset: The offset of the byte to write.
-+ * @byte: The byte to write to the NVM.
+ *
-+ * Writes a single byte to the NVM using the flash access registers.
-+ * Goes through a retry algorithm before giving up.
++ * Prepares the hardware for transmit and receive by doing the following:
++ * - initialize hardware bits
++ * - initialize LED identification
++ * - setup receive address registers
++ * - setup flow control
++ * - setup transmit descriptors
++ * - clear statistics
+ **/
-+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
-+ u32 offset, u8 byte)
++static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
+{
++ struct e1000_mac_info *mac = &hw->mac;
++ u32 ctrl_ext, txdctl, snoop;
+ s32 ret_val;
-+ u16 program_retries;
++ u16 i;
+
-+ DEBUGFUNC("e1000_retry_write_flash_byte_ich8lan");
++ e1000_initialize_hw_bits_ich8lan(hw);
+
-+ ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
-+ if (ret_val == E1000_SUCCESS)
-+ goto out;
++ /* Initialize identification LED */
++ ret_val = mac->ops.id_led_init(hw);
++ if (ret_val)
++ /* This is not fatal and we should not stop init due to this */
++ e_dbg("Error initializing identification LED\n");
+
-+ for (program_retries = 0; program_retries < 100; program_retries++) {
-+ DEBUGOUT2("Retrying Byte %2.2X at offset %u\n", byte, offset);
-+ usec_delay(100);
-+ ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
-+ if (ret_val == E1000_SUCCESS)
-+ break;
-+ }
-+ if (program_retries == 100) {
-+ ret_val = -E1000_ERR_NVM;
-+ goto out;
++ /* Setup the receive address. */
++ e1000e_init_rx_addrs(hw, mac->rar_entry_count);
++
++ /* Zero out the Multicast HASH table */
++ e_dbg("Zeroing the MTA\n");
++ for (i = 0; i < mac->mta_reg_count; i++)
++ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
++
++ /*
++ * The 82578 Rx buffer will stall if wakeup is enabled in host and
++ * the ME. Reading the BM_WUC register will clear the host wakeup bit.
++ * Reset the phy after disabling host wakeup to reset the Rx buffer.
++ */
++ if (hw->phy.type == e1000_phy_82578) {
++ e1e_rphy(hw, BM_WUC, &i);
++ ret_val = e1000_phy_hw_reset_ich8lan(hw);
++ if (ret_val)
++ return ret_val;
+ }
+
-+out:
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_erase_flash_bank_ich8lan - Erase a bank (4k) from NVM
-+ * @hw: pointer to the HW structure
-+ * @bank: 0 for first bank, 1 for second bank, etc.
-+ *
-+ * Erases the bank specified. Each bank is a 4k block. Banks are 0 based.
-+ * bank N is 4096 * N + flash_reg_addr.
-+ **/
-+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
-+{
-+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ union ich8_hws_flash_status hsfsts;
-+ union ich8_hws_flash_ctrl hsflctl;
-+ u32 flash_linear_addr;
-+ /* bank size is in 16bit words - adjust to bytes */
-+ u32 flash_bank_size = nvm->flash_bank_size * 2;
-+ s32 ret_val = E1000_SUCCESS;
-+ s32 count = 0;
-+ s32 j, iteration, sector_size;
-+
-+ DEBUGFUNC("e1000_erase_flash_bank_ich8lan");
-+
-+ hsfsts.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-+
-+ /*
-+ * Determine HW Sector size: Read BERASE bits of hw flash status
-+ * register
-+ * 00: The Hw sector is 256 bytes, hence we need to erase 16
-+ * consecutive sectors. The start index for the nth Hw sector
-+ * can be calculated as = bank * 4096 + n * 256
-+ * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
-+ * The start index for the nth Hw sector can be calculated
-+ * as = bank * 4096
-+ * 10: The Hw sector is 8K bytes, nth sector = bank * 8192
-+ * (ich9 only, otherwise error condition)
-+ * 11: The Hw sector is 64K bytes, nth sector = bank * 65536
-+ */
-+ switch (hsfsts.hsf_status.berasesz) {
-+ case 0:
-+ /* Hw sector size 256 */
-+ sector_size = ICH_FLASH_SEG_SIZE_256;
-+ iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_256;
-+ break;
-+ case 1:
-+ sector_size = ICH_FLASH_SEG_SIZE_4K;
-+ iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_4K;
-+ break;
-+ case 2:
-+ if (hw->mac.type == e1000_ich9lan) {
-+ sector_size = ICH_FLASH_SEG_SIZE_8K;
-+ iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_8K;
-+ } else {
-+ ret_val = -E1000_ERR_NVM;
-+ goto out;
-+ }
-+ break;
-+ case 3:
-+ sector_size = ICH_FLASH_SEG_SIZE_64K;
-+ iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_64K;
-+ break;
-+ default:
-+ ret_val = -E1000_ERR_NVM;
-+ goto out;
-+ }
-+
-+ /* Start with the base address, then add the sector offset. */
-+ flash_linear_addr = hw->nvm.flash_base_addr;
-+ flash_linear_addr += (bank) ? (sector_size * iteration) : 0;
-+
-+ for (j = 0; j < iteration ; j++) {
-+ do {
-+ /* Steps */
-+ ret_val = e1000_flash_cycle_init_ich8lan(hw);
-+ if (ret_val)
-+ goto out;
-+
-+ /*
-+ * Write a value 11 (block Erase) in Flash
-+ * Cycle field in hw flash control
-+ */
-+ hsflctl.regval = E1000_READ_FLASH_REG16(hw,
-+ ICH_FLASH_HSFCTL);
-+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
-+ E1000_WRITE_FLASH_REG16(hw,
-+ ICH_FLASH_HSFCTL,
-+ hsflctl.regval);
-+
-+ /*
-+ * Write the last 24 bits of an index within the
-+ * block into Flash Linear address field in Flash
-+ * Address.
-+ */
-+ flash_linear_addr += (j * sector_size);
-+ E1000_WRITE_FLASH_REG(hw,
-+ ICH_FLASH_FADDR,
-+ flash_linear_addr);
-+
-+ ret_val = e1000_flash_cycle_ich8lan(hw,
-+ ICH_FLASH_ERASE_COMMAND_TIMEOUT);
-+ if (ret_val == E1000_SUCCESS) {
-+ break;
-+ } else {
-+ /*
-+ * Check if FCERR is set to 1. If 1,
-+ * clear it and try the whole sequence
-+ * a few more times else Done
-+ */
-+ hsfsts.regval = E1000_READ_FLASH_REG16(hw,
-+ ICH_FLASH_HSFSTS);
-+ if (hsfsts.hsf_status.flcerr == 1) {
-+ /*
-+ * repeat for some time before
-+ * giving up
-+ */
-+ continue;
-+ } else if (hsfsts.hsf_status.flcdone == 0)
-+ goto out;
-+ }
-+ } while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
-+ }
-+
-+out:
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_valid_led_default_ich8lan - Set the default LED settings
-+ * @hw: pointer to the HW structure
-+ * @data: Pointer to the LED settings
-+ *
-+ * Reads the LED default settings from the NVM to data. If the NVM LED
-+ * settings is all 0's or F's, set the LED default to a valid LED default
-+ * setting.
-+ **/
-+static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
-+{
-+ s32 ret_val;
-+
-+ DEBUGFUNC("e1000_valid_led_default_ich8lan");
-+
-+ ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
-+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
-+ goto out;
-+ }
-+
-+ if (*data == ID_LED_RESERVED_0000 ||
-+ *data == ID_LED_RESERVED_FFFF)
-+ *data = ID_LED_DEFAULT_ICH8LAN;
-+
-+out:
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_get_bus_info_ich8lan - Get/Set the bus type and width
-+ * @hw: pointer to the HW structure
-+ *
-+ * ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
-+ * register, so the the bus width is hard coded.
-+ **/
-+static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
-+{
-+ struct e1000_bus_info *bus = &hw->bus;
-+ s32 ret_val;
-+
-+ DEBUGFUNC("e1000_get_bus_info_ich8lan");
-+
-+ ret_val = e1000_get_bus_info_pcie_generic(hw);
-+
-+ /*
-+ * ICH devices are "PCI Express"-ish. They have
-+ * a configuration space, but do not contain
-+ * PCI Express Capability registers, so bus width
-+ * must be hardcoded.
-+ */
-+ if (bus->width == e1000_bus_width_unknown)
-+ bus->width = e1000_bus_width_pcie_x1;
-+
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_reset_hw_ich8lan - Reset the hardware
-+ * @hw: pointer to the HW structure
-+ *
-+ * Does a full reset of the hardware which includes a reset of the PHY and
-+ * MAC.
-+ **/
-+static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
-+{
-+ u32 ctrl, icr, kab;
-+ s32 ret_val;
-+
-+ DEBUGFUNC("e1000_reset_hw_ich8lan");
-+
-+ /*
-+ * Prevent the PCI-E bus from sticking if there is no TLP connection
-+ * on the last TLP read/write transaction when MAC is reset.
-+ */
-+ ret_val = e1000_disable_pcie_master_generic(hw);
-+ if (ret_val) {
-+ DEBUGOUT("PCI-E Master disable polling has failed.\n");
-+ }
-+
-+ DEBUGOUT("Masking off all interrupts\n");
-+ E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
-+
-+ /*
-+ * Disable the Transmit and Receive units. Then delay to allow
-+ * any pending transactions to complete before we hit the MAC
-+ * with the global reset.
-+ */
-+ E1000_WRITE_REG(hw, E1000_RCTL, 0);
-+ E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
-+ E1000_WRITE_FLUSH(hw);
-+
-+ msec_delay(10);
-+
-+ /* Workaround for ICH8 bit corruption issue in FIFO memory */
-+ if (hw->mac.type == e1000_ich8lan) {
-+ /* Set Tx and Rx buffer allocation to 8k apiece. */
-+ E1000_WRITE_REG(hw, E1000_PBA, E1000_PBA_8K);
-+ /* Set Packet Buffer Size to 16k. */
-+ E1000_WRITE_REG(hw, E1000_PBS, E1000_PBS_16K);
-+ }
-+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
-+
-+ if (!hw->phy.ops.check_reset_block(hw) && !hw->phy.reset_disable) {
-+ /*
-+ * PHY HW reset requires MAC CORE reset at the same
-+ * time to make sure the interface between MAC and the
-+ * external PHY is reset.
-+ */
-+ ctrl |= E1000_CTRL_PHY_RST;
-+ }
-+ ret_val = e1000_acquire_swflag_ich8lan(hw);
-+ DEBUGOUT("Issuing a global reset to ich8lan");
-+ E1000_WRITE_REG(hw, E1000_CTRL, (ctrl | E1000_CTRL_RST));
-+ msec_delay(20);
-+
-+ ret_val = e1000_get_auto_rd_done_generic(hw);
-+ if (ret_val) {
-+ /*
-+ * When auto config read does not complete, do not
-+ * return with an error. This can happen in situations
-+ * where there is no eeprom and prevents getting link.
-+ */
-+ DEBUGOUT("Auto Read Done did not complete\n");
-+ }
-+
-+ E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
-+ icr = E1000_READ_REG(hw, E1000_ICR);
-+
-+ kab = E1000_READ_REG(hw, E1000_KABGTXD);
-+ kab |= E1000_KABGTXD_BGSQLBIAS;
-+ E1000_WRITE_REG(hw, E1000_KABGTXD, kab);
-+
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_init_hw_ich8lan - Initialize the hardware
-+ * @hw: pointer to the HW structure
-+ *
-+ * Prepares the hardware for transmit and receive by doing the following:
-+ * - initialize hardware bits
-+ * - initialize LED identification
-+ * - setup receive address registers
-+ * - setup flow control
-+ * - setup transmit descriptors
-+ * - clear statistics
-+ **/
-+static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
-+{
-+ struct e1000_mac_info *mac = &hw->mac;
-+ u32 ctrl_ext, txdctl, snoop;
-+ s32 ret_val;
-+ u16 i;
-+
-+ DEBUGFUNC("e1000_init_hw_ich8lan");
-+
-+ e1000_initialize_hw_bits_ich8lan(hw);
-+
-+ /* Initialize identification LED */
-+ ret_val = e1000_id_led_init_generic(hw);
-+ if (ret_val) {
-+ DEBUGOUT("Error initializing identification LED\n");
-+ /* This is not fatal and we should not stop init due to this */
-+ }
-+
-+ /* Setup the receive address. */
-+ e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
-+
-+ /* Zero out the Multicast HASH table */
-+ DEBUGOUT("Zeroing the MTA\n");
-+ for (i = 0; i < mac->mta_reg_count; i++)
-+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
-+
-+ /* Setup link and flow control */
-+ ret_val = mac->ops.setup_link(hw);
++ /* Setup link and flow control */
++ ret_val = mac->ops.setup_link(hw);
+
+ /* Set the transmit descriptor write-back policy for both queues */
-+ txdctl = E1000_READ_REG(hw, E1000_TXDCTL(0));
++ txdctl = er32(TXDCTL(0));
+ txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB;
+ txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(0), txdctl);
-+ txdctl = E1000_READ_REG(hw, E1000_TXDCTL(1));
++ ew32(TXDCTL(0), txdctl);
++ txdctl = er32(TXDCTL(1));
+ txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB;
+ txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(1), txdctl);
++ ew32(TXDCTL(1), txdctl);
+
+ /*
+ * ICH8 has opposite polarity of no_snoop bits.
+ snoop = PCIE_ICH8_SNOOP_ALL;
+ else
+ snoop = (u32)~(PCIE_NO_SNOOP_ALL);
-+ e1000_set_pcie_no_snoop_generic(hw, snoop);
++ e1000e_set_pcie_no_snoop(hw, snoop);
+
-+ ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
++ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
-+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
++ ew32(CTRL_EXT, ctrl_ext);
+
+ /*
+ * Clear all of the statistics registers (clear on read). It is
+{
+ u32 reg;
+
-+ DEBUGFUNC("e1000_initialize_hw_bits_ich8lan");
-+
-+ if (hw->mac.disable_hw_init_bits)
-+ goto out;
-+
+ /* Extended Device Control */
-+ reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
++ reg = er32(CTRL_EXT);
+ reg |= (1 << 22);
-+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
++ /* Enable PHY low-power state when MAC is at D3 w/o WoL */
++ if (hw->mac.type >= e1000_pchlan)
++ reg |= E1000_CTRL_EXT_PHYPDEN;
++ ew32(CTRL_EXT, reg);
+
+ /* Transmit Descriptor Control 0 */
-+ reg = E1000_READ_REG(hw, E1000_TXDCTL(0));
++ reg = er32(TXDCTL(0));
+ reg |= (1 << 22);
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(0), reg);
++ ew32(TXDCTL(0), reg);
+
+ /* Transmit Descriptor Control 1 */
-+ reg = E1000_READ_REG(hw, E1000_TXDCTL(1));
++ reg = er32(TXDCTL(1));
+ reg |= (1 << 22);
-+ E1000_WRITE_REG(hw, E1000_TXDCTL(1), reg);
++ ew32(TXDCTL(1), reg);
+
+ /* Transmit Arbitration Control 0 */
-+ reg = E1000_READ_REG(hw, E1000_TARC(0));
++ reg = er32(TARC(0));
+ if (hw->mac.type == e1000_ich8lan)
+ reg |= (1 << 28) | (1 << 29);
+ reg |= (1 << 23) | (1 << 24) | (1 << 26) | (1 << 27);
-+ E1000_WRITE_REG(hw, E1000_TARC(0), reg);
++ ew32(TARC(0), reg);
+
+ /* Transmit Arbitration Control 1 */
-+ reg = E1000_READ_REG(hw, E1000_TARC(1));
-+ if (E1000_READ_REG(hw, E1000_TCTL) & E1000_TCTL_MULR)
++ reg = er32(TARC(1));
++ if (er32(TCTL) & E1000_TCTL_MULR)
+ reg &= ~(1 << 28);
+ else
+ reg |= (1 << 28);
+ reg |= (1 << 24) | (1 << 26) | (1 << 30);
-+ E1000_WRITE_REG(hw, E1000_TARC(1), reg);
++ ew32(TARC(1), reg);
+
+ /* Device Status */
+ if (hw->mac.type == e1000_ich8lan) {
-+ reg = E1000_READ_REG(hw, E1000_STATUS);
++ reg = er32(STATUS);
+ reg &= ~(1 << 31);
-+ E1000_WRITE_REG(hw, E1000_STATUS, reg);
++ ew32(STATUS, reg);
+ }
+
-+out:
+ return;
+}
+
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_setup_link_ich8lan");
-+
-+ if (hw->phy.ops.check_reset_block(hw))
++ if (e1000_check_reset_block(hw))
+ goto out;
+
+ /*
+ * the default flow control setting, so we explicitly
+ * set it to full.
+ */
-+ if (hw->fc.type == e1000_fc_default)
-+ hw->fc.type = e1000_fc_full;
++ if (hw->fc.requested_mode == e1000_fc_default)
++ hw->fc.requested_mode = e1000_fc_full;
+
-+ hw->fc.original_type = hw->fc.type;
++ /*
++ * Save off the requested flow control mode for use later. Depending
++ * on the link partner's capabilities, we may or may not use this mode.
++ */
++ hw->fc.current_mode = hw->fc.requested_mode;
+
-+ DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc.type);
++ e_dbg("After fix-ups FlowControl is now = %x\n",
++ hw->fc.current_mode);
+
+ /* Continue to configure the copper link. */
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
+ if (ret_val)
+ goto out;
+
-+ E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time);
++ ew32(FCTTV, hw->fc.pause_time);
++ if ((hw->phy.type == e1000_phy_82578) ||
++ (hw->phy.type == e1000_phy_82577)) {
++ ret_val = e1e_wphy(hw,
++ PHY_REG(BM_PORT_CTRL_PAGE, 27),
++ hw->fc.pause_time);
++ if (ret_val)
++ goto out;
++ }
+
-+ ret_val = e1000_set_fc_watermarks_generic(hw);
++ ret_val = e1000e_set_fc_watermarks(hw);
+
+out:
+ return ret_val;
+ s32 ret_val;
+ u16 reg_data;
+
-+ DEBUGFUNC("e1000_setup_copper_link_ich8lan");
-+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+
+ /*
+ * Set the mac to wait the maximum time between each iteration
+ * and increase the max iterations when polling the phy;
+ * this fixes erroneous timeouts at 10Mbps.
+ */
-+ ret_val = e1000_write_kmrn_reg_generic(hw, GG82563_REG(0x34, 4),
++ ret_val = e1000e_write_kmrn_reg(hw,
++ E1000_KMRNCTRLSTA_TIMEOUTS,
+ 0xFFFF);
+ if (ret_val)
+ goto out;
-+ ret_val = e1000_read_kmrn_reg_generic(hw, GG82563_REG(0x34, 9),
++ ret_val = e1000e_read_kmrn_reg(hw,
++ E1000_KMRNCTRLSTA_INBAND_PARAM,
+ ®_data);
+ if (ret_val)
+ goto out;
+ reg_data |= 0x3F;
-+ ret_val = e1000_write_kmrn_reg_generic(hw, GG82563_REG(0x34, 9),
++ ret_val = e1000e_write_kmrn_reg(hw,
++ E1000_KMRNCTRLSTA_INBAND_PARAM,
+ reg_data);
+ if (ret_val)
+ goto out;
+
-+ if (hw->phy.type == e1000_phy_igp_3) {
-+ ret_val = e1000_copper_link_setup_igp(hw);
++ switch (hw->phy.type) {
++ case e1000_phy_igp_3:
++ ret_val = e1000e_copper_link_setup_igp(hw);
+ if (ret_val)
+ goto out;
-+ } else if (hw->phy.type == e1000_phy_bm) {
-+ ret_val = e1000_copper_link_setup_m88(hw);
++ break;
++ case e1000_phy_bm:
++ case e1000_phy_82578:
++ ret_val = e1000e_copper_link_setup_m88(hw);
+ if (ret_val)
+ goto out;
-+ }
-+
-+ if (hw->phy.type == e1000_phy_ife) {
-+ ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL,
-+ ®_data);
++ break;
++ case e1000_phy_82577:
++ ret_val = e1000_copper_link_setup_82577(hw);
++ if (ret_val)
++ goto out;
++ break;
++ case e1000_phy_ife:
++ ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL,
++ ®_data);
+ if (ret_val)
+ goto out;
+
+ reg_data |= IFE_PMC_AUTO_MDIX;
+ break;
+ }
-+ ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL,
++ ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL,
+ reg_data);
+ if (ret_val)
+ goto out;
++ break;
++ default:
++ break;
+ }
-+ ret_val = e1000_setup_copper_link_generic(hw);
++ ret_val = e1000e_setup_copper_link(hw);
+
+out:
+ return ret_val;
+{
+ s32 ret_val;
+
-+ DEBUGFUNC("e1000_get_link_up_info_ich8lan");
-+
-+ ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed, duplex);
++ ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
+ if (ret_val)
+ goto out;
+
++ if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
++ ret_val = e1000e_write_kmrn_reg(hw,
++ E1000_KMRNCTRLSTA_K1_CONFIG,
++ E1000_KMRNCTRLSTA_K1_DISABLE);
++ if (ret_val)
++ goto out;
++ }
++
+ if ((hw->mac.type == e1000_ich8lan) &&
+ (hw->phy.type == e1000_phy_igp_3) &&
+ (*speed == SPEED_1000)) {
+ **/
+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
+{
-+ struct e1000_dev_spec_ich8lan *dev_spec;
++ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ u32 phy_ctrl;
+ s32 ret_val = E1000_SUCCESS;
+ u16 i, data;
+ bool link;
+
-+ DEBUGFUNC("e1000_kmrn_lock_loss_workaround_ich8lan");
-+
-+ dev_spec = (struct e1000_dev_spec_ich8lan *)hw->dev_spec;
-+
-+ if (!dev_spec) {
-+ DEBUGOUT("dev_spec pointer is set to NULL.\n");
-+ ret_val = -E1000_ERR_CONFIG;
-+ goto out;
-+ }
-+
+ if (!(dev_spec->kmrn_lock_loss_workaround_enabled))
+ goto out;
+
+ * Attempting this while link is negotiating fouled up link
+ * stability
+ */
-+ ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
++ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (!link) {
+ ret_val = E1000_SUCCESS;
+ goto out;
+
+ for (i = 0; i < 10; i++) {
+ /* read once to clear */
-+ ret_val = hw->phy.ops.read_reg(hw, IGP3_KMRN_DIAG, &data);
++ ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
+ if (ret_val)
+ goto out;
+ /* and again to get new status */
-+ ret_val = hw->phy.ops.read_reg(hw, IGP3_KMRN_DIAG, &data);
++ ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
+ if (ret_val)
+ goto out;
+
+ }
+
+ /* Issue PHY reset */
-+ hw->phy.ops.reset(hw);
-+ msec_delay_irq(5);
++ e1000_phy_hw_reset(hw);
++ mdelay(5);
+ }
+ /* Disable GigE link negotiation */
-+ phy_ctrl = E1000_READ_REG(hw, E1000_PHY_CTRL);
++ phy_ctrl = er32(PHY_CTRL);
+ phy_ctrl |= (E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
-+ E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl);
++ ew32(PHY_CTRL, phy_ctrl);
+
+ /*
+ * Call gig speed drop workaround on Gig disable before accessing
+ * any PHY registers
+ */
-+ e1000_gig_downshift_workaround_ich8lan(hw);
++ e1000e_gig_downshift_workaround_ich8lan(hw);
+
+ /* unable to acquire PCS lock */
+ ret_val = -E1000_ERR_PHY;
+}
+
+/**
-+ * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
++ * e1000e_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
+ * @hw: pointer to the HW structure
+ * @state: boolean value used to set the current Kumeran workaround state
+ *
+ * If ICH8, set the current Kumeran workaround state (enabled - true
+ * /disabled - false).
+ **/
-+void e1000_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
++void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+ bool state)
+{
-+ struct e1000_dev_spec_ich8lan *dev_spec;
-+
-+ DEBUGFUNC("e1000_set_kmrn_lock_loss_workaround_ich8lan");
++ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+
+ if (hw->mac.type != e1000_ich8lan) {
-+ DEBUGOUT("Workaround applies to ICH8 only.\n");
-+ goto out;
-+ }
-+
-+ dev_spec = (struct e1000_dev_spec_ich8lan *)hw->dev_spec;
-+
-+ if (!dev_spec) {
-+ DEBUGOUT("dev_spec pointer is set to NULL.\n");
-+ goto out;
++ e_dbg("Workaround applies to ICH8 only.\n");
++ return;
+ }
+
+ dev_spec->kmrn_lock_loss_workaround_enabled = state;
+
-+out:
+ return;
+}
+
+ * 3) read it back
+ * Continue if successful, else issue LCD reset and repeat
+ **/
-+void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
++void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
+{
+ u32 reg;
+ u16 data;
+ u8 retry = 0;
+
-+ DEBUGFUNC("e1000_igp3_phy_powerdown_workaround_ich8lan");
-+
+ if (hw->phy.type != e1000_phy_igp_3)
+ goto out;
+
+ /* Try the workaround twice (if needed) */
+ do {
+ /* Disable link */
-+ reg = E1000_READ_REG(hw, E1000_PHY_CTRL);
++ reg = er32(PHY_CTRL);
+ reg |= (E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
-+ E1000_WRITE_REG(hw, E1000_PHY_CTRL, reg);
++ ew32(PHY_CTRL, reg);
+
+ /*
+ * Call gig speed drop workaround on Gig disable before
+ * accessing any PHY registers
+ */
+ if (hw->mac.type == e1000_ich8lan)
-+ e1000_gig_downshift_workaround_ich8lan(hw);
++ e1000e_gig_downshift_workaround_ich8lan(hw);
+
+ /* Write VR power-down enable */
-+ hw->phy.ops.read_reg(hw, IGP3_VR_CTRL, &data);
++ e1e_rphy(hw, IGP3_VR_CTRL, &data);
+ data &= ~IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
-+ hw->phy.ops.write_reg(hw,
-+ IGP3_VR_CTRL,
++ e1e_wphy(hw, IGP3_VR_CTRL,
+ data | IGP3_VR_CTRL_MODE_SHUTDOWN);
+
+ /* Read it back and test */
-+ hw->phy.ops.read_reg(hw, IGP3_VR_CTRL, &data);
++ e1e_rphy(hw, IGP3_VR_CTRL, &data);
+ data &= IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
+ if ((data == IGP3_VR_CTRL_MODE_SHUTDOWN) || retry)
+ break;
+
+ /* Issue PHY reset and repeat at most one more time */
-+ reg = E1000_READ_REG(hw, E1000_CTRL);
-+ E1000_WRITE_REG(hw, E1000_CTRL, reg | E1000_CTRL_PHY_RST);
++ reg = er32(CTRL);
++ ew32(CTRL, reg | E1000_CTRL_PHY_RST);
+ retry++;
+ } while (retry);
+
+}
+
+/**
-+ * e1000_gig_downshift_workaround_ich8lan - WoL from S5 stops working
++ * e1000e_gig_downshift_workaround_ich8lan - WoL from S5 stops working
+ * @hw: pointer to the HW structure
+ *
+ * Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
+ * 2) Clear Kumeran Near-end loopback
+ * Should only be called for ICH8[m] devices with IGP_3 Phy.
+ **/
-+void e1000_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
++void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u16 reg_data;
+
-+ DEBUGFUNC("e1000_gig_downshift_workaround_ich8lan");
-+
+ if ((hw->mac.type != e1000_ich8lan) ||
+ (hw->phy.type != e1000_phy_igp_3))
+ goto out;
+
-+ ret_val = e1000_read_kmrn_reg_generic(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
++ ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ ®_data);
+ if (ret_val)
+ goto out;
+ reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
-+ ret_val = e1000_write_kmrn_reg_generic(hw,
++ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ reg_data);
+ if (ret_val)
+ goto out;
+ reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
-+ ret_val = e1000_write_kmrn_reg_generic(hw,
++ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ reg_data);
+out:
+}
+
+/**
-+ * e1000_disable_gig_wol_ich8lan - disable gig during WoL
++ * e1000e_disable_gig_wol_ich8lan - disable gig during WoL
+ * @hw: pointer to the HW structure
+ *
+ * During S0 to Sx transition, it is possible the link remains at gig
+ * 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
+ * to a lower speed.
+ *
-+ * Should only be called for ICH9 and ICH10 devices.
++ * Should only be called for applicable parts.
+ **/
-+void e1000_disable_gig_wol_ich8lan(struct e1000_hw *hw)
++void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
+{
+ u32 phy_ctrl;
+
-+ if ((hw->mac.type == e1000_ich10lan) ||
-+ (hw->mac.type == e1000_ich9lan)) {
-+ phy_ctrl = E1000_READ_REG(hw, E1000_PHY_CTRL);
++ switch (hw->mac.type) {
++ case e1000_ich9lan:
++ case e1000_ich10lan:
++ case e1000_pchlan:
++ phy_ctrl = er32(PHY_CTRL);
+ phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU |
+ E1000_PHY_CTRL_GBE_DISABLE;
-+ E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl);
++ ew32(PHY_CTRL, phy_ctrl);
++
++ /* Workaround SWFLAG unexpectedly set during S0->Sx */
++ if (hw->mac.type == e1000_pchlan)
++ udelay(500);
++ default:
++ break;
+ }
+
+ return;
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_cleanup_led_ich8lan");
-+
+ if (hw->phy.type == e1000_phy_ife)
-+ ret_val = hw->phy.ops.write_reg(hw,
-+ IFE_PHY_SPECIAL_CONTROL_LED,
++ ret_val = e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ 0);
+ else
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_default);
++ ew32(LEDCTL, hw->mac.ledctl_default);
+
+ return ret_val;
+}
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_led_on_ich8lan");
-+
+ if (hw->phy.type == e1000_phy_ife)
-+ ret_val = hw->phy.ops.write_reg(hw,
-+ IFE_PHY_SPECIAL_CONTROL_LED,
++ ret_val = e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+ else
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode2);
++ ew32(LEDCTL, hw->mac.ledctl_mode2);
+
+ return ret_val;
+}
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_led_off_ich8lan");
-+
+ if (hw->phy.type == e1000_phy_ife)
-+ ret_val = hw->phy.ops.write_reg(hw,
++ ret_val = e1e_wphy(hw,
+ IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
+ else
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1);
++ ew32(LEDCTL, hw->mac.ledctl_mode1);
+
+ return ret_val;
+}
+
+/**
++ * e1000_setup_led_pchlan - Configures SW controllable LED
++ * @hw: pointer to the HW structure
++ *
++ * This prepares the SW controllable LED for use.
++ **/
++static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
++{
++ return e1e_wphy(hw, HV_LED_CONFIG,
++ (u16)hw->mac.ledctl_mode1);
++}
++
++/**
++ * e1000_cleanup_led_pchlan - Restore the default LED operation
++ * @hw: pointer to the HW structure
++ *
++ * Return the LED back to the default configuration.
++ **/
++static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
++{
++ return e1e_wphy(hw, HV_LED_CONFIG,
++ (u16)hw->mac.ledctl_default);
++}
++
++/**
++ * e1000_led_on_pchlan - Turn LEDs on
++ * @hw: pointer to the HW structure
++ *
++ * Turn on the LEDs.
++ **/
++static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
++{
++ u16 data = (u16)hw->mac.ledctl_mode2;
++ u32 i, led;
++
++ /*
++ * If no link, then turn LED on by setting the invert bit
++ * for each LED that's mode is "link_up" in ledctl_mode2.
++ */
++ if (!(er32(STATUS) & E1000_STATUS_LU)) {
++ for (i = 0; i < 3; i++) {
++ led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
++ if ((led & E1000_PHY_LED0_MODE_MASK) !=
++ E1000_LEDCTL_MODE_LINK_UP)
++ continue;
++ if (led & E1000_PHY_LED0_IVRT)
++ data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
++ else
++ data |= (E1000_PHY_LED0_IVRT << (i * 5));
++ }
++ }
++
++ return e1e_wphy(hw, HV_LED_CONFIG, data);
++}
++
++/**
++ * e1000_led_off_pchlan - Turn LEDs off
++ * @hw: pointer to the HW structure
++ *
++ * Turn off the LEDs.
++ **/
++static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
++{
++ u16 data = (u16)hw->mac.ledctl_mode1;
++ u32 i, led;
++
++ /*
++ * If no link, then turn LED off by clearing the invert bit
++ * for each LED that's mode is "link_up" in ledctl_mode1.
++ */
++ if (!(er32(STATUS) & E1000_STATUS_LU)) {
++ for (i = 0; i < 3; i++) {
++ led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
++ if ((led & E1000_PHY_LED0_MODE_MASK) !=
++ E1000_LEDCTL_MODE_LINK_UP)
++ continue;
++ if (led & E1000_PHY_LED0_IVRT)
++ data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
++ else
++ data |= (E1000_PHY_LED0_IVRT << (i * 5));
++ }
++ }
++
++ return e1e_wphy(hw, HV_LED_CONFIG, data);
++}
++
++/**
+ * e1000_get_cfg_done_ich8lan - Read config done bit
+ * @hw: pointer to the HW structure
+ *
+ s32 ret_val = E1000_SUCCESS;
+ u32 bank = 0;
+
-+ e1000_get_cfg_done_generic(hw);
++ if (hw->mac.type >= e1000_pchlan) {
++ u32 status = er32(STATUS);
++
++ if (status & E1000_STATUS_PHYRA) {
++ ew32(STATUS, status &
++ ~E1000_STATUS_PHYRA);
++ } else
++ e_dbg("PHY Reset Asserted not set - needs delay\n");
++ }
++
++ e1000e_get_cfg_done(hw);
+
+ /* If EEPROM is not marked present, init the IGP 3 PHY manually */
-+ if (hw->mac.type != e1000_ich10lan) {
-+ if (((E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) == 0) &&
-+ (hw->phy.type == e1000_phy_igp_3)) {
++ if ((hw->mac.type != e1000_ich10lan) &&
++ (hw->mac.type != e1000_pchlan)) {
++ if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
++ (hw->phy.type == e1000_phy_igp_3)) {
+ e1000_phy_init_script_igp3(hw);
+ }
+ } else {
+ if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
-+ /* Maybe we should do a basic Boazman config */
-+ DEBUGOUT("EEPROM not present\n");
++ /* Maybe we should do a basic PHY config */
++ e_dbg("EEPROM not present\n");
+ ret_val = -E1000_ERR_CONFIG;
+ }
+ }
+ **/
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw)
+{
-+ struct e1000_phy_info *phy = &hw->phy;
-+ struct e1000_mac_info *mac = &hw->mac;
-+
+ /* If the management interface is not enabled, then power down */
-+ if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
++ if (!(hw->mac.ops.check_mng_mode(hw) ||
++ e1000_check_reset_block(hw)))
+ e1000_power_down_phy_copper(hw);
+
+ return;
+ **/
+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
+{
-+ volatile u32 temp;
-+
-+ DEBUGFUNC("e1000_clear_hw_cntrs_ich8lan");
-+
-+ e1000_clear_hw_cntrs_base_generic(hw);
-+
-+ temp = E1000_READ_REG(hw, E1000_ALGNERRC);
-+ temp = E1000_READ_REG(hw, E1000_RXERRC);
-+ temp = E1000_READ_REG(hw, E1000_TNCRS);
-+ temp = E1000_READ_REG(hw, E1000_CEXTERR);
-+ temp = E1000_READ_REG(hw, E1000_TSCTC);
-+ temp = E1000_READ_REG(hw, E1000_TSCTFC);
-+
-+ temp = E1000_READ_REG(hw, E1000_MGTPRC);
-+ temp = E1000_READ_REG(hw, E1000_MGTPDC);
-+ temp = E1000_READ_REG(hw, E1000_MGTPTC);
++ u16 phy_data;
+
-+ temp = E1000_READ_REG(hw, E1000_IAC);
-+ temp = E1000_READ_REG(hw, E1000_ICRXOC);
++ e1000e_clear_hw_cntrs_base(hw);
++
++ er32(ALGNERRC);
++ er32(RXERRC);
++ er32(TNCRS);
++ er32(CEXTERR);
++ er32(TSCTC);
++ er32(TSCTFC);
++
++ er32(MGTPRC);
++ er32(MGTPDC);
++ er32(MGTPTC);
++
++ er32(IAC);
++ er32(ICRXOC);
++
++ /* Clear PHY statistics registers */
++ if ((hw->phy.type == e1000_phy_82578) ||
++ (hw->phy.type == e1000_phy_82577)) {
++ e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
++ e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
++ e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
++ e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
++ e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
++ e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
++ e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
++ e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
++ e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
++ e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
++ e1e_rphy(hw, HV_DC_UPPER, &phy_data);
++ e1e_rphy(hw, HV_DC_LOWER, &phy_data);
++ e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
++ e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
++ }
+}
+
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_ich8lan.h linux-2.6.22-10/drivers/net/e1000e/e1000_ich8lan.h
--- linux-2.6.22-0/drivers/net/e1000e/e1000_ich8lan.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_ich8lan.h 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,144 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_ich8lan.h 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,167 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+#define ICH_FLASH_HSFCTL 0x0006
+#define ICH_FLASH_FADDR 0x0008
+#define ICH_FLASH_FDATA0 0x0010
-+#define ICH_FLASH_PR0 0x0074
+
-+#define ICH_FLASH_READ_COMMAND_TIMEOUT 500
-+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500
-+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000
++/* Requires up to 10 seconds when MNG might be accessing part. */
++#define ICH_FLASH_READ_COMMAND_TIMEOUT 10000000
++#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000
++#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10
+
+#define FLASH_GFPREG_BASE_MASK 0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT 12
+
-+#define E1000_SHADOW_RAM_WORDS 2048
-+
+#define ICH_FLASH_SEG_SIZE_256 256
+#define ICH_FLASH_SEG_SIZE_4K 4096
+#define ICH_FLASH_SEG_SIZE_8K 8192
+#define E1000_ICH_MNG_IAMT_MODE 0x2
+
+#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
-+ (ID_LED_DEF1_OFF2 << 8) | \
-+ (ID_LED_DEF1_ON2 << 4) | \
++ (ID_LED_OFF1_OFF2 << 8) | \
++ (ID_LED_OFF1_ON2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+
+#define E1000_ICH_NVM_SIG_WORD 0x13
+#define E1000_ICH_NVM_SIG_MASK 0xC000
++#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0
++#define E1000_ICH_NVM_SIG_VALUE 0x80
+
+#define E1000_ICH8_LAN_INIT_TIMEOUT 1500
+
+#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200
+#define IGP3_PM_CTRL_FORCE_PWR_DOWN 0x0020
+
++/* PHY Wakeup Registers and defines */
++#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0)
++#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
++#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
++#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
++#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
++#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
++#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
++#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
++#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
++
++#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */
++#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */
++#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */
++#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */
++#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */
++#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */
++#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */
++
++#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
++#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
++#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
++#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
++#define HV_SCC_UPPER PHY_REG(778, 16) /* Single Collision Count */
++#define HV_SCC_LOWER PHY_REG(778, 17)
++#define HV_ECOL_UPPER PHY_REG(778, 18) /* Excessive Collision Count */
++#define HV_ECOL_LOWER PHY_REG(778, 19)
++#define HV_MCC_UPPER PHY_REG(778, 20) /* Multiple Collision Count */
++#define HV_MCC_LOWER PHY_REG(778, 21)
++#define HV_LATECOL_UPPER PHY_REG(778, 23) /* Late Collision Count */
++#define HV_LATECOL_LOWER PHY_REG(778, 24)
++#define HV_COLC_UPPER PHY_REG(778, 25) /* Collision Count */
++#define HV_COLC_LOWER PHY_REG(778, 26)
++#define HV_DC_UPPER PHY_REG(778, 27) /* Defer Count */
++#define HV_DC_LOWER PHY_REG(778, 28)
++#define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */
++#define HV_TNCRS_LOWER PHY_REG(778, 30)
++
+/*
+ * Additional interrupts need to be handled for ICH family:
+ * DSW = The FW changed the status of the DISSW bit in FWSM
+#define E1000_RXDEXT_LINKSEC_ERROR_BAD_SIG 0x60000000
+
+
-+/* ICH Flash Protected Region */
-+union ich8_flash_protected_range {
-+ struct ich8_pr {
-+ u32 base:13; /* 0:12 Protected Range Base */
-+ u32 reserved1:2; /* 13:14 Reserved */
-+ u32 rpe:1; /* 15 Read Protection Enable */
-+ u32 limit:13; /* 16:28 Protected Range Limit */
-+ u32 reserved2:2; /* 29:30 Reserved */
-+ u32 wpe:1; /* 31 Write Protection Enable */
-+ } range;
-+ u32 regval;
-+};
-+
-+void e1000_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
++void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+ bool state);
-+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
-+
-+void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
-+void e1000_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
-+void e1000_disable_gig_wol_ich8lan(struct e1000_hw *hw);
++void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
++void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
++void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
+
+#endif
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_mac.c linux-2.6.22-10/drivers/net/e1000e/e1000_mac.c
--- linux-2.6.22-0/drivers/net/e1000e/e1000_mac.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_mac.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,1988 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_mac.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,1864 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+
+*******************************************************************************/
+
-+#include "e1000_hw.h"
++#include "e1000.h"
++
++static u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr);
++static s32 e1000_set_default_fc_generic(struct e1000_hw *hw);
++static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw);
++static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw);
++static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw);
++static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
+
+/**
+ * e1000_init_mac_ops_generic - Initialize MAC function pointers
+void e1000_init_mac_ops_generic(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
-+ DEBUGFUNC("e1000_init_mac_ops_generic");
-+
+ /* General Setup */
-+ mac->ops.read_mac_addr = e1000_read_mac_addr_generic;
-+ mac->ops.remove_device = e1000_remove_device_generic;
-+ mac->ops.config_collision_dist = e1000_config_collision_dist_generic;
++ mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pcie;
++ mac->ops.read_mac_addr = e1000e_read_mac_addr_generic;
++ mac->ops.config_collision_dist = e1000e_config_collision_dist;
+ /* LINK */
-+ mac->ops.wait_autoneg = e1000_wait_autoneg_generic;
++ mac->ops.wait_autoneg = e1000_wait_autoneg;
+ /* Management */
+ mac->ops.mng_host_if_write = e1000_mng_host_if_write_generic;
+ mac->ops.mng_write_cmd_header = e1000_mng_write_cmd_header_generic;
+ mac->ops.mng_enable_host_if = e1000_mng_enable_host_if_generic;
+ /* VLAN, MC, etc. */
-+ mac->ops.rar_set = e1000_rar_set_generic;
++ mac->ops.rar_set = e1000e_rar_set;
+ mac->ops.validate_mdi_setting = e1000_validate_mdi_setting_generic;
+}
+
+/**
-+ * e1000_remove_device_generic - Free device specific structure
-+ * @hw: pointer to the HW structure
-+ *
-+ * If a device specific structure was allocated, this function will
-+ * free it.
-+ **/
-+void e1000_remove_device_generic(struct e1000_hw *hw)
-+{
-+ DEBUGFUNC("e1000_remove_device_generic");
-+
-+ /* Freeing the dev_spec member of e1000_hw structure */
-+ e1000_free_dev_spec_struct(hw);
-+}
-+
-+/**
-+ * e1000_get_bus_info_pcie_generic - Get PCIe bus information
++ * e1000e_get_bus_info_pcie - Get PCIe bus information
+ * @hw: pointer to the HW structure
+ *
+ * Determines and stores the system bus information for a particular
+ * network interface. The following bus information is determined and stored:
+ * bus speed, bus width, type (PCIe), and PCIe function.
+ **/
-+s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw)
++s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
+{
++ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_bus_info *bus = &hw->bus;
-+ s32 ret_val;
-+ u32 status;
-+ u16 pcie_link_status, pci_header_type;
+
-+ DEBUGFUNC("e1000_get_bus_info_pcie_generic");
++ s32 ret_val;
++ u16 pcie_link_status;
+
+ bus->type = e1000_bus_type_pci_express;
+ bus->speed = e1000_bus_speed_2500;
+ if (ret_val)
+ bus->width = e1000_bus_width_unknown;
+ else
-+ bus->width = (e1000_bus_width)((pcie_link_status &
++ bus->width = (enum e1000_bus_width)((pcie_link_status &
+ PCIE_LINK_WIDTH_MASK) >>
+ PCIE_LINK_WIDTH_SHIFT);
+
-+ e1000_read_pci_cfg(hw, PCI_HEADER_TYPE_REGISTER, &pci_header_type);
-+ if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) {
-+ status = E1000_READ_REG(hw, E1000_STATUS);
-+ bus->func = (status & E1000_STATUS_FUNC_MASK)
-+ >> E1000_STATUS_FUNC_SHIFT;
-+ } else {
-+ bus->func = 0;
-+ }
++ mac->ops.set_lan_id(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
-+ * e1000_clear_vfta_generic - Clear VLAN filter table
++ * e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
++ *
++ * @hw: pointer to the HW structure
++ *
++ * Determines the LAN function id by reading memory-mapped registers
++ * and swaps the port value if requested.
++ **/
++static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
++{
++ struct e1000_bus_info *bus = &hw->bus;
++ u32 reg;
++
++ /*
++ * The status register reports the correct function number
++ * for the device regardless of function swap state.
++ */
++ reg = er32(STATUS);
++ bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
++}
++
++/**
++ * e1000_set_lan_id_single_port - Set LAN id for a single port device
++ * @hw: pointer to the HW structure
++ *
++ * Sets the LAN function id to zero for a single port device.
++ **/
++void e1000_set_lan_id_single_port(struct e1000_hw *hw)
++{
++ struct e1000_bus_info *bus = &hw->bus;
++
++ bus->func = 0;
++}
++
++/**
++ * e1000e_clear_vfta_generic - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
-+void e1000_clear_vfta_generic(struct e1000_hw *hw)
++void e1000e_clear_vfta_generic(struct e1000_hw *hw)
+{
+ u32 offset;
+
-+ DEBUGFUNC("e1000_clear_vfta_generic");
-+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
-+ E1000_WRITE_FLUSH(hw);
++ e1e_flush();
+ }
+}
+
+/**
-+ * e1000_write_vfta_generic - Write value to VLAN filter table
++ * e1000e_write_vfta_generic - Write value to VLAN filter table
+ * @hw: pointer to the HW structure
+ * @offset: register offset in VLAN filter table
+ * @value: register value written to VLAN filter table
+ * Writes value at the given offset in the register array which stores
+ * the VLAN filter table.
+ **/
-+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
++void e1000e_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
+{
-+ DEBUGFUNC("e1000_write_vfta_generic");
-+
+ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
-+ E1000_WRITE_FLUSH(hw);
++ e1e_flush();
+}
+
+/**
-+ * e1000_init_rx_addrs_generic - Initialize receive address's
++ * e1000e_init_rx_addrs - Initialize receive address's
+ * @hw: pointer to the HW structure
+ * @rar_count: receive address registers
+ *
+ * register to the devices MAC address and clearing all the other receive
+ * address registers to 0.
+ **/
-+void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count)
++void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+{
+ u32 i;
-+
-+ DEBUGFUNC("e1000_init_rx_addrs_generic");
++ u8 mac_addr[ETH_ADDR_LEN] = {0};
+
+ /* Setup the receive address */
-+ DEBUGOUT("Programming MAC Address into RAR[0]\n");
++ e_dbg("Programming MAC Address into RAR[0]\n");
+
+ hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+ /* Zero out the other (rar_entry_count - 1) receive addresses */
-+ DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count-1);
-+ for (i = 1; i < rar_count; i++) {
-+ E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0);
-+ E1000_WRITE_FLUSH(hw);
-+ E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((i << 1) + 1), 0);
-+ E1000_WRITE_FLUSH(hw);
-+ }
++ e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
++ for (i = 1; i < rar_count; i++)
++ hw->mac.ops.rar_set(hw, mac_addr, i);
+}
+
+/**
+ *
+ * Checks the nvm for an alternate MAC address. An alternate MAC address
+ * can be setup by pre-boot software and must be treated like a permanent
-+ * address and must override the actual permanent MAC address. If an
-+ * alternate MAC address is found it is saved in the hw struct and
-+ * programmed into RAR0 and the function returns success, otherwise the
-+ * function returns an error.
++ * address and must override the actual permanent MAC address. If an
++ * alternate MAC address is found it is programmed into RAR0, replacing
++ * the permanent address that was installed into RAR0 by the Si on reset.
++ * This function will return SUCCESS unless it encounters an error while
++ * reading the EEPROM.
+ **/
+s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
+{
+ u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+ u8 alt_mac_addr[ETH_ADDR_LEN];
+
-+ DEBUGFUNC("e1000_check_alt_mac_addr_generic");
-+
-+ ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1,
++ ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+ &nvm_alt_mac_addr_offset);
+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
++ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (nvm_alt_mac_addr_offset == 0xFFFF) {
-+ ret_val = -(E1000_NOT_IMPLEMENTED);
++ /* There is no Alternate MAC Address */
+ goto out;
+ }
+
+ if (hw->bus.func == E1000_FUNC_1)
-+ nvm_alt_mac_addr_offset += ETH_ADDR_LEN/sizeof(u16);
-+
++ nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
+ for (i = 0; i < ETH_ADDR_LEN; i += 2) {
+ offset = nvm_alt_mac_addr_offset + (i >> 1);
-+ ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
++ ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
++ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+
+ /* if multicast bit is set, the alternate address will not be used */
+ if (alt_mac_addr[0] & 0x01) {
-+ ret_val = -(E1000_NOT_IMPLEMENTED);
++ e_dbg("Ignoring Alternate Mac Address with MC bit set\n");
+ goto out;
+ }
+
-+ for (i = 0; i < ETH_ADDR_LEN; i++)
-+ hw->mac.addr[i] = hw->mac.perm_addr[i] = alt_mac_addr[i];
-+
-+ hw->mac.ops.rar_set(hw, hw->mac.perm_addr, 0);
++ /*
++ * We have a valid alternate MAC address, and we want to treat it the
++ * same as the normal permanent MAC address stored by the HW into the
++ * RAR. Do this by mapping this address into RAR0.
++ */
++ hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_rar_set_generic - Set receive address register
++ * e1000e_rar_set - Set receive address register
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index: receive address array register
+ * Sets the receive address array register at index to the address passed
+ * in by addr.
+ **/
-+void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index)
++void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
-+ DEBUGFUNC("e1000_rar_set_generic");
-+
+ /*
+ * HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* If MAC address zero, no need to set the AV bit */
-+ if (rar_low || rar_high) {
-+ if (!hw->mac.disable_av)
-+ rar_high |= E1000_RAH_AV;
-+ }
++ if (rar_low || rar_high)
++ rar_high |= E1000_RAH_AV;
+
-+ E1000_WRITE_REG(hw, E1000_RAL(index), rar_low);
-+ E1000_WRITE_REG(hw, E1000_RAH(index), rar_high);
++ /*
++ * Some bridges will combine consecutive 32-bit writes into
++ * a single burst write, which will malfunction on some parts.
++ * The flushes avoid this.
++ */
++ ew32(RAL(index), rar_low);
++ e1e_flush();
++ ew32(RAH(index), rar_high);
++ e1e_flush();
+}
+
+/**
+{
+ u32 hash_bit, hash_reg, mta;
+
-+ DEBUGFUNC("e1000_mta_set_generic");
+ /*
+ * The MTA is a register array of 32-bit registers. It is
+ * treated like an array of (32*mta_reg_count) bits. We want to
+ mta |= (1 << hash_bit);
+
+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, hash_reg, mta);
-+ E1000_WRITE_FLUSH(hw);
++ e1e_flush();
+}
+
+/**
-+ * e1000_update_mc_addr_list_generic - Update Multicast addresses
++ * e1000e_update_mc_addr_list_generic - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
-+ * @rar_used_count: the first RAR register free to program
-+ * @rar_count: total number of supported Receive Address Registers
+ *
-+ * Updates the Receive Address Registers and Multicast Table Array.
++ * Updates entire Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
-+ * The parameter rar_count will usually be hw->mac.rar_entry_count
-+ * unless there are workarounds that change this.
+ **/
-+void e1000_update_mc_addr_list_generic(struct e1000_hw *hw,
-+ u8 *mc_addr_list, u32 mc_addr_count,
-+ u32 rar_used_count, u32 rar_count)
++void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
++ u8 *mc_addr_list, u32 mc_addr_count)
+{
-+ u32 hash_value;
-+ u32 i;
++ u32 hash_value, hash_bit, hash_reg;
++ int i;
+
-+ DEBUGFUNC("e1000_update_mc_addr_list_generic");
++ /* clear mta_shadow */
++ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
-+ /*
-+ * Load the first set of multicast addresses into the exact
-+ * filters (RAR). If there are not enough to fill the RAR
-+ * array, clear the filters.
-+ */
-+ for (i = rar_used_count; i < rar_count; i++) {
-+ if (mc_addr_count) {
-+ hw->mac.ops.rar_set(hw, mc_addr_list, i);
-+ mc_addr_count--;
-+ mc_addr_list += ETH_ADDR_LEN;
-+ } else {
-+ E1000_WRITE_REG_ARRAY(hw, E1000_RA, i << 1, 0);
-+ E1000_WRITE_FLUSH(hw);
-+ E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1) + 1, 0);
-+ E1000_WRITE_FLUSH(hw);
-+ }
-+ }
++ /* update mta_shadow from mc_addr_list */
++ for (i = 0; (u32) i < mc_addr_count; i++) {
++ hash_value = e1000_hash_mc_addr_generic(hw, mc_addr_list);
+
-+ /* Clear the old settings from the MTA */
-+ DEBUGOUT("Clearing MTA\n");
-+ for (i = 0; i < hw->mac.mta_reg_count; i++) {
-+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
-+ E1000_WRITE_FLUSH(hw);
-+ }
++ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
++ hash_bit = hash_value & 0x1F;
+
-+ /* Load any remaining multicast addresses into the hash table. */
-+ for (; mc_addr_count > 0; mc_addr_count--) {
-+ hash_value = e1000_hash_mc_addr_generic(hw, mc_addr_list);
-+ DEBUGOUT1("Hash value = 0x%03X\n", hash_value);
-+ hw->mac.ops.mta_set(hw, hash_value);
-+ mc_addr_list += ETH_ADDR_LEN;
++ hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
++ mc_addr_list += (ETH_ADDR_LEN);
+ }
++
++ /* replace the entire MTA table */
++ for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
++ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]);
++ e1e_flush();
+}
+
+/**
+ * the multicast filter table array address and new table value. See
+ * e1000_mta_set_generic()
+ **/
-+u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr)
++static u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value, hash_mask;
+ u8 bit_shift = 0;
+
-+ DEBUGFUNC("e1000_hash_mc_addr_generic");
-+
+ /* Register count multiplied by bits per register */
+ hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+ * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+ */
+ switch (hw->mac.mc_filter_type) {
-+ default:
-+ case 0:
-+ break;
-+ case 1:
-+ bit_shift += 1;
-+ break;
-+ case 2:
-+ bit_shift += 2;
-+ break;
-+ case 3:
-+ bit_shift += 4;
-+ break;
++ default:
++ case 0:
++ break;
++ case 1:
++ bit_shift += 1;
++ break;
++ case 2:
++ bit_shift += 2;
++ break;
++ case 3:
++ bit_shift += 4;
++ break;
+ }
+
+ hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+}
+
+/**
-+ * e1000_clear_hw_cntrs_base_generic - Clear base hardware counters
++ * e1000e_clear_hw_cntrs_base - Clear base hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the base hardware counters by reading the counter registers.
+ **/
-+void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw)
-+{
-+ volatile u32 temp;
-+
-+ DEBUGFUNC("e1000_clear_hw_cntrs_base_generic");
-+
-+ temp = E1000_READ_REG(hw, E1000_CRCERRS);
-+ temp = E1000_READ_REG(hw, E1000_SYMERRS);
-+ temp = E1000_READ_REG(hw, E1000_MPC);
-+ temp = E1000_READ_REG(hw, E1000_SCC);
-+ temp = E1000_READ_REG(hw, E1000_ECOL);
-+ temp = E1000_READ_REG(hw, E1000_MCC);
-+ temp = E1000_READ_REG(hw, E1000_LATECOL);
-+ temp = E1000_READ_REG(hw, E1000_COLC);
-+ temp = E1000_READ_REG(hw, E1000_DC);
-+ temp = E1000_READ_REG(hw, E1000_SEC);
-+ temp = E1000_READ_REG(hw, E1000_RLEC);
-+ temp = E1000_READ_REG(hw, E1000_XONRXC);
-+ temp = E1000_READ_REG(hw, E1000_XONTXC);
-+ temp = E1000_READ_REG(hw, E1000_XOFFRXC);
-+ temp = E1000_READ_REG(hw, E1000_XOFFTXC);
-+ temp = E1000_READ_REG(hw, E1000_FCRUC);
-+ temp = E1000_READ_REG(hw, E1000_GPRC);
-+ temp = E1000_READ_REG(hw, E1000_BPRC);
-+ temp = E1000_READ_REG(hw, E1000_MPRC);
-+ temp = E1000_READ_REG(hw, E1000_GPTC);
-+ temp = E1000_READ_REG(hw, E1000_GORCL);
-+ temp = E1000_READ_REG(hw, E1000_GORCH);
-+ temp = E1000_READ_REG(hw, E1000_GOTCL);
-+ temp = E1000_READ_REG(hw, E1000_GOTCH);
-+ temp = E1000_READ_REG(hw, E1000_RNBC);
-+ temp = E1000_READ_REG(hw, E1000_RUC);
-+ temp = E1000_READ_REG(hw, E1000_RFC);
-+ temp = E1000_READ_REG(hw, E1000_ROC);
-+ temp = E1000_READ_REG(hw, E1000_RJC);
-+ temp = E1000_READ_REG(hw, E1000_TORL);
-+ temp = E1000_READ_REG(hw, E1000_TORH);
-+ temp = E1000_READ_REG(hw, E1000_TOTL);
-+ temp = E1000_READ_REG(hw, E1000_TOTH);
-+ temp = E1000_READ_REG(hw, E1000_TPR);
-+ temp = E1000_READ_REG(hw, E1000_TPT);
-+ temp = E1000_READ_REG(hw, E1000_MPTC);
-+ temp = E1000_READ_REG(hw, E1000_BPTC);
-+}
-+
-+/**
-+ * e1000_check_for_copper_link_generic - Check for link (Copper)
++void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
++{
++ er32(CRCERRS);
++ er32(SYMERRS);
++ er32(MPC);
++ er32(SCC);
++ er32(ECOL);
++ er32(MCC);
++ er32(LATECOL);
++ er32(COLC);
++ er32(DC);
++ er32(SEC);
++ er32(RLEC);
++ er32(XONRXC);
++ er32(XONTXC);
++ er32(XOFFRXC);
++ er32(XOFFTXC);
++ er32(FCRUC);
++ er32(GPRC);
++ er32(BPRC);
++ er32(MPRC);
++ er32(GPTC);
++ er32(GORCL);
++ er32(GORCH);
++ er32(GOTCL);
++ er32(GOTCH);
++ er32(RNBC);
++ er32(RUC);
++ er32(RFC);
++ er32(ROC);
++ er32(RJC);
++ er32(TORL);
++ er32(TORH);
++ er32(TOTL);
++ er32(TOTH);
++ er32(TPR);
++ er32(TPT);
++ er32(MPTC);
++ er32(BPTC);
++}
++/**
++ * e1000e_check_for_copper_link - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
-+s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw)
++s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
-+ DEBUGFUNC("e1000_check_for_copper_link");
-+
+ /*
+ * We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
-+ ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
++ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ * Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
-+ e1000_check_downshift_generic(hw);
++ e1000e_check_downshift(hw);
+
+ /*
+ * If we are forcing speed/duplex, then we simply return since
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
-+ e1000_config_collision_dist_generic(hw);
++ e1000e_config_collision_dist(hw);
+
+ /*
+ * Configure Flow Control now that Auto-Neg has completed.
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
-+ ret_val = e1000_config_fc_after_link_up_generic(hw);
-+ if (ret_val) {
-+ DEBUGOUT("Error configuring flow control\n");
-+ }
++ ret_val = e1000e_config_fc_after_link_up(hw);
++ if (ret_val)
++ e_dbg("Error configuring flow control\n");
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_check_for_fiber_link_generic - Check for link (Fiber)
++ * e1000e_check_for_fiber_link - Check for link (Fiber)
+ * @hw: pointer to the HW structure
+ *
+ * Checks for link up on the hardware. If link is not up and we have
+ * a signal, then we need to force link up.
+ **/
-+s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw)
++s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 rxcw;
+ u32 status;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_check_for_fiber_link_generic");
-+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
-+ status = E1000_READ_REG(hw, E1000_STATUS);
-+ rxcw = E1000_READ_REG(hw, E1000_RXCW);
++ ctrl = er32(CTRL);
++ status = er32(STATUS);
++ rxcw = er32(RXCW);
+
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
+ mac->autoneg_failed = 1;
+ goto out;
+ }
-+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
++ e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
+
+ /* Disable auto-negotiation in the TXCW register */
-+ E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE));
++ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
-+ ret_val = e1000_config_fc_after_link_up_generic(hw);
++ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error configuring flow control\n");
++ e_dbg("Error configuring flow control\n");
+ goto out;
+ }
+ } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ * and disable forced link in the Device Control register
+ * in an attempt to auto-negotiate with our link partner.
+ */
-+ DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
-+ E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw);
-+ E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU));
++ e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
++ ew32(TXCW, mac->txcw);
++ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ mac->serdes_has_link = true;
+ }
+}
+
+/**
-+ * e1000_check_for_serdes_link_generic - Check for link (Serdes)
++ * e1000e_check_for_serdes_link - Check for link (Serdes)
+ * @hw: pointer to the HW structure
+ *
+ * Checks for link up on the hardware. If link is not up and we have
+ * a signal, then we need to force link up.
+ **/
-+s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
++s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 rxcw;
+ u32 status;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_check_for_serdes_link_generic");
-+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
-+ status = E1000_READ_REG(hw, E1000_STATUS);
-+ rxcw = E1000_READ_REG(hw, E1000_RXCW);
++ ctrl = er32(CTRL);
++ status = er32(STATUS);
++ rxcw = er32(RXCW);
+
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
+ mac->autoneg_failed = 1;
+ goto out;
+ }
-+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
++ e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
+
+ /* Disable auto-negotiation in the TXCW register */
-+ E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE));
++ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
-+ ret_val = e1000_config_fc_after_link_up_generic(hw);
++ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error configuring flow control\n");
++ e_dbg("Error configuring flow control\n");
+ goto out;
+ }
+ } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ * and disable forced link in the Device Control register
+ * in an attempt to auto-negotiate with our link partner.
+ */
-+ DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
-+ E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw);
-+ E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU));
++ e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
++ ew32(TXCW, mac->txcw);
++ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ mac->serdes_has_link = true;
-+ } else if (!(E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW))) {
++ } else if (!(E1000_TXCW_ANE & er32(TXCW))) {
+ /*
+ * If we force link for non-auto-negotiation switch, check
+ * link status based on MAC synchronization for internal
+ * serdes media type.
+ */
+ /* SYNCH bit and IV bit are sticky. */
-+ usec_delay(10);
-+ rxcw = E1000_READ_REG(hw, E1000_RXCW);
++ udelay(10);
++ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ mac->serdes_has_link = true;
-+ DEBUGOUT("SERDES: Link up - forced.\n");
++ e_dbg("SERDES: Link up - forced.\n");
+ }
+ } else {
+ mac->serdes_has_link = false;
-+ DEBUGOUT("SERDES: Link down - force failed.\n");
++ e_dbg("SERDES: Link down - force failed.\n");
+ }
+ }
+
-+ if (E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW)) {
-+ status = E1000_READ_REG(hw, E1000_STATUS);
++ if (E1000_TXCW_ANE & er32(TXCW)) {
++ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ /* SYNCH bit and IV bit are sticky, so reread rxcw. */
-+ usec_delay(10);
-+ rxcw = E1000_READ_REG(hw, E1000_RXCW);
++ udelay(10);
++ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
-+ mac->serdes_has_link = TRUE;
-+ DEBUGOUT("SERDES: Link up - autoneg "
++ mac->serdes_has_link = true;
++ e_dbg("SERDES: Link up - autoneg "
+ "completed sucessfully.\n");
+ } else {
-+ mac->serdes_has_link = FALSE;
-+ DEBUGOUT("SERDES: Link down - invalid"
++ mac->serdes_has_link = false;
++ e_dbg("SERDES: Link down - invalid"
+ "codewords detected in autoneg.\n");
+ }
+ } else {
-+ mac->serdes_has_link = FALSE;
-+ DEBUGOUT("SERDES: Link down - no sync.\n");
++ mac->serdes_has_link = false;
++ e_dbg("SERDES: Link down - no sync.\n");
+ }
+ } else {
-+ mac->serdes_has_link = FALSE;
-+ DEBUGOUT("SERDES: Link down - autoneg failed\n");
++ mac->serdes_has_link = false;
++ e_dbg("SERDES: Link down - autoneg failed\n");
+ }
+ }
+
+}
+
+/**
-+ * e1000_setup_link_generic - Setup flow control and link settings
++ * e1000e_setup_link - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled.
+ **/
-+s32 e1000_setup_link_generic(struct e1000_hw *hw)
++s32 e1000e_setup_link(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_setup_link_generic");
-+
+ /*
+ * In the case of the phy reset being blocked, we already have a link.
+ * We do not need to set it up again.
+ */
+ if (hw->phy.ops.check_reset_block)
-+ if (hw->phy.ops.check_reset_block(hw))
++ if (e1000_check_reset_block(hw))
+ goto out;
+
+ /*
-+ * If flow control is set to default, set flow control based on
-+ * the EEPROM flow control settings.
++ * If requested flow control is set to default, set flow control
++ * based on the EEPROM flow control settings.
+ */
-+ if (hw->fc.type == e1000_fc_default) {
++ if (hw->fc.requested_mode == e1000_fc_default) {
+ ret_val = e1000_set_default_fc_generic(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
-+ * We want to save off the original Flow Control configuration just
-+ * in case we get disconnected and then reconnected into a different
-+ * hub or switch with different Flow Control capabilities.
++ * Save off the requested flow control mode for use later. Depending
++ * on the link partner's capabilities, we may or may not use this mode.
+ */
-+ hw->fc.original_type = hw->fc.type;
++ hw->fc.current_mode = hw->fc.requested_mode;
+
-+ DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc.type);
++ e_dbg("After fix-ups FlowControl is now = %x\n",
++ hw->fc.current_mode);
+
+ /* Call the necessary media_type subroutine to configure the link. */
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
-+ DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
-+ E1000_WRITE_REG(hw, E1000_FCT, FLOW_CONTROL_TYPE);
-+ E1000_WRITE_REG(hw, E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
-+ E1000_WRITE_REG(hw, E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
++ e_dbg("Initializing the Flow Control address, type and timer regs\n");
++ ew32(FCT, FLOW_CONTROL_TYPE);
++ ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
++ ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
-+ E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time);
++ ew32(FCTTV, hw->fc.pause_time);
+
-+ ret_val = e1000_set_fc_watermarks_generic(hw);
++ ret_val = e1000e_set_fc_watermarks(hw);
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_setup_fiber_serdes_link_generic - Setup link for fiber/serdes
++ * e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes
+ * @hw: pointer to the HW structure
+ *
+ * Configures collision distance and flow control for fiber and serdes
+ * links. Upon successful setup, poll for link.
+ **/
-+s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw)
++s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_setup_fiber_serdes_link_generic");
-+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+
+ /* Take the link out of reset */
+ ctrl &= ~E1000_CTRL_LRST;
+
-+ e1000_config_collision_dist_generic(hw);
++ e1000e_config_collision_dist(hw);
+
+ ret_val = e1000_commit_fc_settings_generic(hw);
+ if (ret_val)
+ * then the link-up status bit will be set and the flow control enable
+ * bits (RFCE and TFCE) will be set according to their negotiated value.
+ */
-+ DEBUGOUT("Auto-negotiation enabled\n");
++ e_dbg("Auto-negotiation enabled\n");
+
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-+ E1000_WRITE_FLUSH(hw);
-+ msec_delay(1);
++ ew32(CTRL, ctrl);
++ e1e_flush();
++ msleep(1);
+
+ /*
+ * For these adapters, the SW definable pin 1 is set when the optics
+ * indication.
+ */
+ if (hw->phy.media_type == e1000_media_type_internal_serdes ||
-+ (E1000_READ_REG(hw, E1000_CTRL) & E1000_CTRL_SWDPIN1)) {
++ (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
+ ret_val = e1000_poll_fiber_serdes_link_generic(hw);
+ } else {
-+ DEBUGOUT("No signal detected\n");
++ e_dbg("No signal detected\n");
+ }
+
+out:
+}
+
+/**
-+ * e1000_config_collision_dist_generic - Configure collision distance
++ * e1000e_config_collision_dist - Configure collision distance
+ * @hw: pointer to the HW structure
+ *
+ * Configures the collision distance to the default value and is used
+ * during link setup. Currently no func pointer exists and all
+ * implementations are handled in the generic version of this function.
+ **/
-+void e1000_config_collision_dist_generic(struct e1000_hw *hw)
++void e1000e_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl;
+
-+ DEBUGFUNC("e1000_config_collision_dist_generic");
-+
-+ tctl = E1000_READ_REG(hw, E1000_TCTL);
++ tctl = er32(TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
-+ E1000_WRITE_REG(hw, E1000_TCTL, tctl);
-+ E1000_WRITE_FLUSH(hw);
++ ew32(TCTL, tctl);
++ e1e_flush();
+}
+
+/**
+ * Polls for link up by reading the status register, if link fails to come
+ * up with auto-negotiation, then the link is forced if a signal is detected.
+ **/
-+s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
++static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 i, status;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_poll_fiber_serdes_link_generic");
-+
+ /*
+ * If we have a signal (the cable is plugged in, or assumed true for
+ * serdes media) then poll for a "Link-Up" indication in the Device
+ * milliseconds even if the other end is doing it in SW).
+ */
+ for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
-+ msec_delay(10);
-+ status = E1000_READ_REG(hw, E1000_STATUS);
++ msleep(10);
++ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ break;
+ }
+ if (i == FIBER_LINK_UP_LIMIT) {
-+ DEBUGOUT("Never got a valid link from auto-neg!!!\n");
++ e_dbg("Never got a valid link from auto-neg!!!\n");
+ mac->autoneg_failed = 1;
+ /*
+ * AutoNeg failed to achieve a link, so we'll call
+ */
+ ret_val = hw->mac.ops.check_for_link(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error while checking for link\n");
++ e_dbg("Error while checking for link\n");
+ goto out;
+ }
+ mac->autoneg_failed = 0;
+ } else {
+ mac->autoneg_failed = 0;
-+ DEBUGOUT("Valid Link Found\n");
++ e_dbg("Valid Link Found\n");
+ }
+
+out:
+ * Write the flow control settings to the Transmit Config Word Register (TXCW)
+ * base on the flow control settings in e1000_mac_info.
+ **/
-+s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
++static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 txcw;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_commit_fc_settings_generic");
-+
+ /*
+ * Check for a software override of the flow control settings, and
+ * setup the device accordingly. If auto-negotiation is enabled, then
+ * do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ */
-+ switch (hw->fc.type) {
++ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ /* Flow control completely disabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ default:
-+ DEBUGOUT("Flow control param set incorrectly\n");
++ e_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ break;
+ }
+
-+ E1000_WRITE_REG(hw, E1000_TXCW, txcw);
++ ew32(TXCW, txcw);
+ mac->txcw = txcw;
+
+out:
+}
+
+/**
-+ * e1000_set_fc_watermarks_generic - Set flow control high/low watermarks
++ * e1000e_set_fc_watermarks - Set flow control high/low watermarks
+ * @hw: pointer to the HW structure
+ *
+ * Sets the flow control high/low threshold (watermark) registers. If
+ * flow control XON frame transmission is enabled, then set XON frame
+ * transmission as well.
+ **/
-+s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw)
++s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u32 fcrtl = 0, fcrth = 0;
+
-+ DEBUGFUNC("e1000_set_fc_watermarks_generic");
-+
+ /*
+ * Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * ability to transmit pause frames is not enabled, then these
+ * registers will be set to 0.
+ */
-+ if (hw->fc.type & e1000_fc_tx_pause) {
++ if (hw->fc.current_mode & e1000_fc_tx_pause) {
+ /*
+ * We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of
+
+ fcrth = hw->fc.high_water;
+ }
-+ E1000_WRITE_REG(hw, E1000_FCRTL, fcrtl);
-+ E1000_WRITE_REG(hw, E1000_FCRTH, fcrth);
++ ew32(FCRTL, fcrtl);
++ ew32(FCRTH, fcrth);
+
+ return ret_val;
+}
+ * Read the EEPROM for the default values for flow control and store the
+ * values.
+ **/
-+s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
++static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u16 nvm_data;
+
-+ DEBUGFUNC("e1000_set_default_fc_generic");
-+
+ /*
+ * Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
-+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
++ ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
+
+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
++ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
-+ hw->fc.type = e1000_fc_none;
++ hw->fc.requested_mode = e1000_fc_none;
+ else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
+ NVM_WORD0F_ASM_DIR)
-+ hw->fc.type = e1000_fc_tx_pause;
++ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else
-+ hw->fc.type = e1000_fc_full;
++ hw->fc.requested_mode = e1000_fc_full;
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_force_mac_fc_generic - Force the MAC's flow control settings
++ * e1000e_force_mac_fc - Force the MAC's flow control settings
+ * @hw: pointer to the HW structure
+ *
+ * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
+ * autonegotiation is managed by the PHY rather than the MAC. Software must
+ * also configure these bits when link is forced on a fiber connection.
+ **/
-+s32 e1000_force_mac_fc_generic(struct e1000_hw *hw)
++s32 e1000e_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_force_mac_fc_generic");
-+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+
+ /*
+ * Because we didn't get link via the internal auto-negotiation
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
-+ * according to the "hw->fc.type" parameter.
++ * according to the "hw->fc.current_mode" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 3: Both Rx and Tx flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
-+ DEBUGOUT1("hw->fc.type = %u\n", hw->fc.type);
++ e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
+
-+ switch (hw->fc.type) {
++ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
-+ DEBUGOUT("Flow control param set incorrectly\n");
++ e_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_config_fc_after_link_up_generic - Configures flow control after link
++ * e1000e_config_fc_after_link_up - Configures flow control after link
+ * @hw: pointer to the HW structure
+ *
+ * Checks the status of auto-negotiation after link up to ensure that the
+ * and did not fail, then we configure flow control based on our link
+ * partner.
+ **/
-+s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw)
++s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
-+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+ u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+ u16 speed, duplex;
+
-+ DEBUGFUNC("e1000_config_fc_after_link_up_generic");
-+
+ /*
+ * Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ if (mac->autoneg_failed) {
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes)
-+ ret_val = e1000_force_mac_fc_generic(hw);
++ ret_val = e1000e_force_mac_fc(hw);
+ } else {
+ if (hw->phy.media_type == e1000_media_type_copper)
-+ ret_val = e1000_force_mac_fc_generic(hw);
++ ret_val = e1000e_force_mac_fc(hw);
+ }
+
+ if (ret_val) {
-+ DEBUGOUT("Error forcing flow control settings\n");
++ e_dbg("Error forcing flow control settings\n");
+ goto out;
+ }
+
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
-+ ret_val = phy->ops.read_reg(hw, PHY_STATUS, &mii_status_reg);
++ ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ goto out;
-+ ret_val = phy->ops.read_reg(hw, PHY_STATUS, &mii_status_reg);
++ ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ goto out;
+
+ if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
-+ DEBUGOUT("Copper PHY and Auto Neg "
++ e_dbg("Copper PHY and Auto Neg "
+ "has not completed.\n");
+ goto out;
+ }
+ * Page Ability Register (Address 5) to determine how
+ * flow control was negotiated.
+ */
-+ ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV,
++ ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ goto out;
-+ ret_val = phy->ops.read_reg(hw, PHY_LP_ABILITY,
++ ret_val = e1e_rphy(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ goto out;
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
-+ if (hw->fc.original_type == e1000_fc_full) {
-+ hw->fc.type = e1000_fc_full;
-+ DEBUGOUT("Flow Control = FULL.\r\n");
++ if (hw->fc.requested_mode == e1000_fc_full) {
++ hw->fc.current_mode = e1000_fc_full;
++ e_dbg("Flow Control = FULL.\r\n");
+ } else {
-+ hw->fc.type = e1000_fc_rx_pause;
-+ DEBUGOUT("Flow Control = "
++ hw->fc.current_mode = e1000_fc_rx_pause;
++ e_dbg("Flow Control = "
+ "RX PAUSE frames only.\r\n");
+ }
+ }
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-+ hw->fc.type = e1000_fc_tx_pause;
-+ DEBUGOUT("Flow Control = TX PAUSE frames only.\r\n");
++ hw->fc.current_mode = e1000_fc_tx_pause;
++ e_dbg("Flow Control = TX PAUSE frames only.\r\n");
+ }
+ /*
+ * For transmitting PAUSE frames ONLY.
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-+ hw->fc.type = e1000_fc_rx_pause;
-+ DEBUGOUT("Flow Control = RX PAUSE frames only.\r\n");
++ hw->fc.current_mode = e1000_fc_rx_pause;
++ e_dbg("Flow Control = RX PAUSE frames only.\r\n");
+ } else {
+ /*
+ * Per the IEEE spec, at this point flow control
+ * should be disabled.
+ */
-+ hw->fc.type = e1000_fc_none;
-+ DEBUGOUT("Flow Control = NONE.\r\n");
++ hw->fc.current_mode = e1000_fc_none;
++ e_dbg("Flow Control = NONE.\r\n");
+ }
+
+ /*
+ */
+ ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
+ if (ret_val) {
-+ DEBUGOUT("Error getting link speed and duplex\n");
++ e_dbg("Error getting link speed and duplex\n");
+ goto out;
+ }
+
+ if (duplex == HALF_DUPLEX)
-+ hw->fc.type = e1000_fc_none;
++ hw->fc.current_mode = e1000_fc_none;
+
+ /*
+ * Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
-+ ret_val = e1000_force_mac_fc_generic(hw);
++ ret_val = e1000e_force_mac_fc(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error forcing flow control settings\n");
++ e_dbg("Error forcing flow control settings\n");
+ goto out;
+ }
+ }
+}
+
+/**
-+ * e1000_get_speed_and_duplex_copper_generic - Retrieve current speed/duplex
++ * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ * Read the status register for the current speed/duplex and store the current
+ * speed and duplex for copper connections.
+ **/
-+s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed,
++s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ u32 status;
+
-+ DEBUGFUNC("e1000_get_speed_and_duplex_copper_generic");
-+
-+ status = E1000_READ_REG(hw, E1000_STATUS);
++ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
-+ DEBUGOUT("1000 Mbs, ");
++ e_dbg("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
-+ DEBUGOUT("100 Mbs, ");
++ e_dbg("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
-+ DEBUGOUT("10 Mbs, ");
++ e_dbg("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
-+ DEBUGOUT("Full Duplex\n");
++ e_dbg("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
-+ DEBUGOUT("Half Duplex\n");
++ e_dbg("Half Duplex\n");
+ }
+
+ return E1000_SUCCESS;
+ * Sets the speed and duplex to gigabit full duplex (the only possible option)
+ * for fiber/serdes links.
+ **/
-+s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw,
++s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex)
+{
-+ DEBUGFUNC("e1000_get_speed_and_duplex_fiber_serdes_generic");
-+
+ *speed = SPEED_1000;
+ *duplex = FULL_DUPLEX;
+
+}
+
+/**
-+ * e1000_get_hw_semaphore_generic - Acquire hardware semaphore
++ * e1000e_get_hw_semaphore - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
-+s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw)
++s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 ret_val = E1000_SUCCESS;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
-+ DEBUGFUNC("e1000_get_hw_semaphore_generic");
-+
+ /* Get the SW semaphore */
+ while (i < timeout) {
-+ swsm = E1000_READ_REG(hw, E1000_SWSM);
++ swsm = er32(SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
-+ usec_delay(50);
++ udelay(50);
+ i++;
+ }
+
+ if (i == timeout) {
-+ DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
++ e_dbg("Driver can't access device - SMBI bit is set.\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
-+ swsm = E1000_READ_REG(hw, E1000_SWSM);
-+ E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
++ swsm = er32(SWSM);
++ ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
-+ if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
++ if (er32(SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
-+ usec_delay(50);
++ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
-+ e1000_put_hw_semaphore_generic(hw);
-+ DEBUGOUT("Driver can't access the NVM\n");
++ e1000e_put_hw_semaphore(hw);
++ e_dbg("Driver can't access the NVM\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+}
+
+/**
-+ * e1000_put_hw_semaphore_generic - Release hardware semaphore
++ * e1000e_put_hw_semaphore - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
-+void e1000_put_hw_semaphore_generic(struct e1000_hw *hw)
++void e1000e_put_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
-+ DEBUGFUNC("e1000_put_hw_semaphore_generic");
-+
-+ swsm = E1000_READ_REG(hw, E1000_SWSM);
-+
++ swsm = er32(SWSM);
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
-+
-+ E1000_WRITE_REG(hw, E1000_SWSM, swsm);
++ ew32(SWSM, swsm);
+}
-+
+/**
-+ * e1000_get_auto_rd_done_generic - Check for auto read completion
++ * e1000e_get_auto_rd_done - Check for auto read completion
+ * @hw: pointer to the HW structure
+ *
+ * Check EEPROM for Auto Read done bit.
+ **/
-+s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw)
++s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
+{
+ s32 i = 0;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_get_auto_rd_done_generic");
-+
+ while (i < AUTO_READ_DONE_TIMEOUT) {
-+ if (E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_AUTO_RD)
++ if (er32(EECD) & E1000_EECD_AUTO_RD)
+ break;
-+ msec_delay(1);
++ msleep(1);
+ i++;
+ }
+
+ if (i == AUTO_READ_DONE_TIMEOUT) {
-+ DEBUGOUT("Auto read by HW from NVM has not completed.\n");
++ e_dbg("Auto read by HW from NVM has not completed.\n");
+ ret_val = -E1000_ERR_RESET;
+ goto out;
+ }
+}
+
+/**
-+ * e1000_valid_led_default_generic - Verify a valid default LED config
++ * e1000e_valid_led_default - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
-+s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data)
++s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
-+ DEBUGFUNC("e1000_valid_led_default_generic");
-+
-+ ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
++ ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
++ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+}
+
+/**
-+ * e1000_id_led_init_generic -
++ * e1000e_id_led_init -
+ * @hw: pointer to the HW structure
+ *
+ **/
-+s32 e1000_id_led_init_generic(struct e1000_hw * hw)
++s32 e1000e_id_led_init(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ u16 data, i, temp;
+ const u16 led_mask = 0x0F;
+
-+ DEBUGFUNC("e1000_id_led_init_generic");
-+
+ ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+ if (ret_val)
+ goto out;
+
-+ mac->ledctl_default = E1000_READ_REG(hw, E1000_LEDCTL);
++ mac->ledctl_default = er32(LEDCTL);
+ mac->ledctl_mode1 = mac->ledctl_default;
+ mac->ledctl_mode2 = mac->ledctl_default;
+
+ u32 ledctl;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_setup_led_generic");
-+
+ if (hw->mac.ops.setup_led != e1000_setup_led_generic) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ if (hw->phy.media_type == e1000_media_type_fiber) {
-+ ledctl = E1000_READ_REG(hw, E1000_LEDCTL);
++ ledctl = er32(LEDCTL);
+ hw->mac.ledctl_default = ledctl;
+ /* Turn off LED0 */
+ ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+ E1000_LEDCTL_LED0_MODE_MASK);
+ ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+ E1000_LEDCTL_LED0_MODE_SHIFT);
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl);
++ ew32(LEDCTL, ledctl);
+ } else if (hw->phy.media_type == e1000_media_type_copper) {
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1);
++ ew32(LEDCTL, hw->mac.ledctl_mode1);
+ }
+
+out:
+}
+
+/**
-+ * e1000_cleanup_led_generic - Set LED config to default operation
++ * e1000e_cleanup_led_generic - Set LED config to default operation
+ * @hw: pointer to the HW structure
+ *
+ * Remove the current LED configuration and set the LED configuration
+ * to the default value, saved from the EEPROM.
+ **/
-+s32 e1000_cleanup_led_generic(struct e1000_hw *hw)
++s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_cleanup_led_generic");
-+
-+ if (hw->mac.ops.cleanup_led != e1000_cleanup_led_generic) {
++ if (hw->mac.ops.cleanup_led != e1000e_cleanup_led_generic) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_default);
++ ew32(LEDCTL, hw->mac.ledctl_default);
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_blink_led_generic - Blink LED
++ * e1000e_blink_led - Blink LED
+ * @hw: pointer to the HW structure
+ *
+ * Blink the LEDs which are set to be on.
+ **/
-+s32 e1000_blink_led_generic(struct e1000_hw *hw)
++s32 e1000e_blink_led(struct e1000_hw *hw)
+{
+ u32 ledctl_blink = 0;
+ u32 i;
+
-+ DEBUGFUNC("e1000_blink_led_generic");
-+
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ /* always blink LED0 for PCI-E fiber */
+ ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+ (i * 8));
+ }
+
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl_blink);
++ ew32(LEDCTL, ledctl_blink);
+
+ return E1000_SUCCESS;
+}
+
+/**
-+ * e1000_led_on_generic - Turn LED on
++ * e1000e_led_on_generic - Turn LED on
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED on.
+ **/
-+s32 e1000_led_on_generic(struct e1000_hw *hw)
++s32 e1000e_led_on_generic(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
-+ DEBUGFUNC("e1000_led_on_generic");
-+
+ switch (hw->phy.media_type) {
+ case e1000_media_type_fiber:
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+ break;
+ case e1000_media_type_copper:
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode2);
++ ew32(LEDCTL, hw->mac.ledctl_mode2);
+ break;
+ default:
+ break;
+}
+
+/**
-+ * e1000_led_off_generic - Turn LED off
++ * e1000e_led_off_generic - Turn LED off
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED off.
+ **/
-+s32 e1000_led_off_generic(struct e1000_hw *hw)
++s32 e1000e_led_off_generic(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
-+ DEBUGFUNC("e1000_led_off_generic");
-+
+ switch (hw->phy.media_type) {
+ case e1000_media_type_fiber:
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+ break;
+ case e1000_media_type_copper:
-+ E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1);
++ ew32(LEDCTL, hw->mac.ledctl_mode1);
+ break;
+ default:
+ break;
+}
+
+/**
-+ * e1000_set_pcie_no_snoop_generic - Set PCI-express capabilities
++ * e1000e_set_pcie_no_snoop - Set PCI-express capabilities
+ * @hw: pointer to the HW structure
+ * @no_snoop: bitmap of snoop events
+ *
+ * Set the PCI-express register to snoop for events enabled in 'no_snoop'.
+ **/
-+void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop)
++void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
+{
+ u32 gcr;
+
-+ DEBUGFUNC("e1000_set_pcie_no_snoop_generic");
-+
+ if (hw->bus.type != e1000_bus_type_pci_express)
+ goto out;
+
+ if (no_snoop) {
-+ gcr = E1000_READ_REG(hw, E1000_GCR);
++ gcr = er32(GCR);
+ gcr &= ~(PCIE_NO_SNOOP_ALL);
+ gcr |= no_snoop;
-+ E1000_WRITE_REG(hw, E1000_GCR, gcr);
++ ew32(GCR, gcr);
+ }
+out:
+ return;
+}
+
+/**
-+ * e1000_disable_pcie_master_generic - Disables PCI-express master access
++ * e1000e_disable_pcie_master - Disables PCI-express master access
+ * @hw: pointer to the HW structure
+ *
+ * Returns 0 (E1000_SUCCESS) if successful, else returns -10
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests.
+ **/
-+s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw)
++s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 timeout = MASTER_DISABLE_TIMEOUT;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_disable_pcie_master_generic");
-+
+ if (hw->bus.type != e1000_bus_type_pci_express)
+ goto out;
+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+
+ while (timeout) {
-+ if (!(E1000_READ_REG(hw, E1000_STATUS) &
++ if (!(er32(STATUS) &
+ E1000_STATUS_GIO_MASTER_ENABLE))
+ break;
-+ usec_delay(100);
++ udelay(100);
+ timeout--;
+ }
+
+ if (!timeout) {
-+ DEBUGOUT("Master requests are pending.\n");
++ e_dbg("Master requests are pending.\n");
+ ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING;
+ goto out;
+ }
+}
+
+/**
-+ * e1000_reset_adaptive_generic - Reset Adaptive Interframe Spacing
++ * e1000e_reset_adaptive - Reset Adaptive Interframe Spacing
+ * @hw: pointer to the HW structure
+ *
+ * Reset the Adaptive Interframe Spacing throttle to default values.
+ **/
-+void e1000_reset_adaptive_generic(struct e1000_hw *hw)
++void e1000e_reset_adaptive(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+
-+ DEBUGFUNC("e1000_reset_adaptive_generic");
-+
+ if (!mac->adaptive_ifs) {
-+ DEBUGOUT("Not in Adaptive IFS mode!\n");
++ e_dbg("Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
-+ if (!mac->ifs_params_forced) {
-+ mac->current_ifs_val = 0;
-+ mac->ifs_min_val = IFS_MIN;
-+ mac->ifs_max_val = IFS_MAX;
-+ mac->ifs_step_size = IFS_STEP;
-+ mac->ifs_ratio = IFS_RATIO;
-+ }
++ mac->current_ifs_val = 0;
++ mac->ifs_min_val = IFS_MIN;
++ mac->ifs_max_val = IFS_MAX;
++ mac->ifs_step_size = IFS_STEP;
++ mac->ifs_ratio = IFS_RATIO;
+
+ mac->in_ifs_mode = false;
-+ E1000_WRITE_REG(hw, E1000_AIT, 0);
++ ew32(AIT, 0);
+out:
+ return;
+}
+
+/**
-+ * e1000_update_adaptive_generic - Update Adaptive Interframe Spacing
++ * e1000e_update_adaptive - Update Adaptive Interframe Spacing
+ * @hw: pointer to the HW structure
+ *
+ * Update the Adaptive Interframe Spacing Throttle value based on the
+ * time between transmitted packets and time between collisions.
+ **/
-+void e1000_update_adaptive_generic(struct e1000_hw *hw)
++void e1000e_update_adaptive(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+
-+ DEBUGFUNC("e1000_update_adaptive_generic");
-+
+ if (!mac->adaptive_ifs) {
-+ DEBUGOUT("Not in Adaptive IFS mode!\n");
++ e_dbg("Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
+ else
+ mac->current_ifs_val +=
+ mac->ifs_step_size;
-+ E1000_WRITE_REG(hw, E1000_AIT, mac->current_ifs_val);
++ ew32(AIT, mac->current_ifs_val);
+ }
+ }
+ } else {
+ (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
+ mac->current_ifs_val = 0;
+ mac->in_ifs_mode = false;
-+ E1000_WRITE_REG(hw, E1000_AIT, 0);
++ ew32(AIT, 0);
+ }
+ }
+out:
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_validate_mdi_setting_generic");
-+
+ if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
-+ DEBUGOUT("Invalid MDI setting detected\n");
++ e_dbg("Invalid MDI setting detected\n");
+ hw->phy.mdix = 1;
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+out:
+ return ret_val;
+}
-+
-+/**
-+ * e1000_write_8bit_ctrl_reg_generic - Write a 8bit CTRL register
-+ * @hw: pointer to the HW structure
-+ * @reg: 32bit register offset such as E1000_SCTL
-+ * @offset: register offset to write to
-+ * @data: data to write at register offset
-+ *
-+ * Writes an address/data control type register. There are several of these
-+ * and they all have the format address << 8 | data and bit 31 is polled for
-+ * completion.
-+ **/
-+s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg,
-+ u32 offset, u8 data)
-+{
-+ u32 i, regvalue = 0;
-+ s32 ret_val = E1000_SUCCESS;
-+
-+ DEBUGFUNC("e1000_write_8bit_ctrl_reg_generic");
-+
-+ /* Set up the address and data */
-+ regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT);
-+ E1000_WRITE_REG(hw, reg, regvalue);
-+
-+ /* Poll the ready bit to see if the MDI read completed */
-+ for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
-+ usec_delay(5);
-+ regvalue = E1000_READ_REG(hw, reg);
-+ if (regvalue & E1000_GEN_CTL_READY)
-+ break;
-+ }
-+ if (!(regvalue & E1000_GEN_CTL_READY)) {
-+ DEBUGOUT1("Reg %08x did not indicate ready\n", reg);
-+ ret_val = -E1000_ERR_PHY;
-+ goto out;
-+ }
-+
-+out:
-+ return ret_val;
-+}
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_mac.h linux-2.6.22-10/drivers/net/e1000e/e1000_mac.h
--- linux-2.6.22-0/drivers/net/e1000e/e1000_mac.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_mac.h 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,86 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_mac.h 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,77 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ * by other files in this 'shared code'
+ */
+void e1000_init_mac_ops_generic(struct e1000_hw *hw);
-+s32 e1000_blink_led_generic(struct e1000_hw *hw);
-+s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw);
-+s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw);
-+s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw);
-+s32 e1000_cleanup_led_generic(struct e1000_hw *hw);
-+s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw);
-+s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw);
-+s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw);
-+s32 e1000_force_mac_fc_generic(struct e1000_hw *hw);
-+s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw);
-+s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw);
-+s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw);
-+s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed,
++s32 e1000e_blink_led(struct e1000_hw *hw);
++s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
++s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
++s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
++s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
++s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
++s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
++s32 e1000e_force_mac_fc(struct e1000_hw *hw);
++s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
++s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
++void e1000_set_lan_id_single_port(struct e1000_hw *hw);
++s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
++s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
-+s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw,
++s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
-+s32 e1000_id_led_init_generic(struct e1000_hw *hw);
-+s32 e1000_led_on_generic(struct e1000_hw *hw);
-+s32 e1000_led_off_generic(struct e1000_hw *hw);
-+void e1000_update_mc_addr_list_generic(struct e1000_hw *hw,
-+ u8 *mc_addr_list, u32 mc_addr_count,
-+ u32 rar_used_count, u32 rar_count);
-+s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw);
-+s32 e1000_set_default_fc_generic(struct e1000_hw *hw);
-+s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw);
-+s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw);
++s32 e1000e_id_led_init(struct e1000_hw *hw);
++s32 e1000e_led_on_generic(struct e1000_hw *hw);
++s32 e1000e_led_off_generic(struct e1000_hw *hw);
++void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
++ u8 *mc_addr_list, u32 mc_addr_count);
++s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
++s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
+s32 e1000_setup_led_generic(struct e1000_hw *hw);
-+s32 e1000_setup_link_generic(struct e1000_hw *hw);
-+s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw);
-+s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg,
-+ u32 offset, u8 data);
++s32 e1000e_setup_link(struct e1000_hw *hw);
+
-+u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr);
-+
-+void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw);
-+void e1000_clear_vfta_generic(struct e1000_hw *hw);
-+void e1000_config_collision_dist_generic(struct e1000_hw *hw);
-+void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count);
++void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw);
++void e1000e_clear_vfta_generic(struct e1000_hw *hw);
++void e1000e_config_collision_dist(struct e1000_hw *hw);
++void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void e1000_mta_set_generic(struct e1000_hw *hw, u32 hash_value);
+void e1000_pcix_mmrbc_workaround_generic(struct e1000_hw *hw);
-+void e1000_put_hw_semaphore_generic(struct e1000_hw *hw);
-+void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index);
++void e1000e_put_hw_semaphore(struct e1000_hw *hw);
++void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
-+void e1000_remove_device_generic(struct e1000_hw *hw);
-+void e1000_reset_adaptive_generic(struct e1000_hw *hw);
-+void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop);
-+void e1000_update_adaptive_generic(struct e1000_hw *hw);
-+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
++void e1000e_reset_adaptive(struct e1000_hw *hw);
++void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
++void e1000e_update_adaptive(struct e1000_hw *hw);
++void e1000e_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+
+#endif
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_manage.c linux-2.6.22-10/drivers/net/e1000e/e1000_manage.c
--- linux-2.6.22-0/drivers/net/e1000e/e1000_manage.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_manage.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,383 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_manage.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,365 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+
+*******************************************************************************/
+
-+#include "e1000_hw.h"
++#include "e1000.h"
+
+static u8 e1000_calculate_checksum(u8 *buffer, u32 length);
+
+ u32 i;
+ u8 sum = 0;
+
-+ DEBUGFUNC("e1000_calculate_checksum");
-+
+ if (!buffer)
+ return 0;
-+
+ for (i = 0; i < length; i++)
+ sum += buffer[i];
+
+ * and also checks whether the previous command is completed. It busy waits
+ * in case of previous command is not completed.
+ **/
-+s32 e1000_mng_enable_host_if_generic(struct e1000_hw * hw)
++s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw)
+{
+ u32 hicr;
+ s32 ret_val = E1000_SUCCESS;
+ u8 i;
+
-+ DEBUGFUNC("e1000_mng_enable_host_if_generic");
-+
+ /* Check that the host interface is enabled. */
-+ hicr = E1000_READ_REG(hw, E1000_HICR);
++ hicr = er32(HICR);
+ if ((hicr & E1000_HICR_EN) == 0) {
-+ DEBUGOUT("E1000_HOST_EN bit disabled.\n");
++ e_dbg("E1000_HOST_EN bit disabled.\n");
+ ret_val = -E1000_ERR_HOST_INTERFACE_COMMAND;
+ goto out;
+ }
+ /* check the previous command is completed */
+ for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
-+ hicr = E1000_READ_REG(hw, E1000_HICR);
++ hicr = er32(HICR);
+ if (!(hicr & E1000_HICR_C))
+ break;
-+ msec_delay_irq(1);
++ mdelay(1);
+ }
+
+ if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
-+ DEBUGOUT("Previous command timeout failed .\n");
++ e_dbg("Previous command timeout failed .\n");
+ ret_val = -E1000_ERR_HOST_INTERFACE_COMMAND;
+ goto out;
+ }
+{
+ u32 fwsm;
+
-+ DEBUGFUNC("e1000_check_mng_mode_generic");
-+
-+ fwsm = E1000_READ_REG(hw, E1000_FWSM);
-+
-+ return ((fwsm & E1000_FWSM_MODE_MASK) ==
-+ (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
++ fwsm = er32(FWSM);
++ return (fwsm & E1000_FWSM_MODE_MASK) ==
++ (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
+}
-+
+/**
-+ * e1000_enable_tx_pkt_filtering_generic - Enable packet filtering on TX
++ * e1000e_enable_tx_pkt_filtering - Enable packet filtering on TX
+ * @hw: pointer to the HW structure
+ *
+ * Enables packet filtering on transmit packets if manageability is enabled
+ * and host interface is enabled.
+ **/
-+bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw)
++bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
+{
+ struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
+ u32 *buffer = (u32 *)&hw->mng_cookie;
+ u8 i, len;
+ bool tx_filter = true;
+
-+ DEBUGFUNC("e1000_enable_tx_pkt_filtering_generic");
-+
+ /* No manageability, no filtering */
+ if (!hw->mac.ops.check_mng_mode(hw)) {
+ tx_filter = false;
+}
+
+/**
-+ * e1000_mng_write_dhcp_info_generic - Writes DHCP info to host interface
++ * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
+ * @hw: pointer to the HW structure
+ * @buffer: pointer to the host interface
+ * @length: size of the buffer
+ *
+ * Writes the DHCP information to the host interface.
+ **/
-+s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw * hw, u8 *buffer,
++s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
+ u16 length)
+{
+ struct e1000_host_mng_command_header hdr;
+ s32 ret_val;
+ u32 hicr;
+
-+ DEBUGFUNC("e1000_mng_write_dhcp_info_generic");
-+
+ hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
+ hdr.command_length = length;
+ hdr.reserved1 = 0;
+ goto out;
+
+ /* Tell the ARC a new command is pending. */
-+ hicr = E1000_READ_REG(hw, E1000_HICR);
-+ E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
++ hicr = er32(HICR);
++ ew32(HICR, hicr | E1000_HICR_C);
+
+out:
+ return ret_val;
+ *
+ * Writes the command header after does the checksum calculation.
+ **/
-+s32 e1000_mng_write_cmd_header_generic(struct e1000_hw * hw,
-+ struct e1000_host_mng_command_header * hdr)
++s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw,
++ struct e1000_host_mng_command_header *hdr)
+{
+ u16 i, length = sizeof(struct e1000_host_mng_command_header);
+
-+ DEBUGFUNC("e1000_mng_write_cmd_header_generic");
-+
+ /* Write the whole command header structure with new checksum. */
+
+ hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
+ for (i = 0; i < length; i++) {
+ E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i,
+ *((u32 *) hdr + i));
-+ E1000_WRITE_FLUSH(hw);
++ e1e_flush();
+ }
+
+ return E1000_SUCCESS;
+ * It also does alignment considerations to do the writes in most efficient
+ * way. Also fills up the sum of the buffer in *buffer parameter.
+ **/
-+s32 e1000_mng_host_if_write_generic(struct e1000_hw * hw, u8 *buffer,
++s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer,
+ u16 length, u16 offset, u8 *sum)
+{
+ u8 *tmp;
+ s32 ret_val = E1000_SUCCESS;
+ u16 remaining, i, j, prev_bytes;
+
-+ DEBUGFUNC("e1000_mng_host_if_write_generic");
-+
+ /* sum = only sum of the data and it is not checksum */
+
+ if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) {
+ *sum += *(tmp + j);
+ }
+
-+ E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, data);
++ E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i,
++ data);
+ }
+ if (remaining) {
+ for (j = 0; j < sizeof(u32); j++) {
+}
+
+/**
-+ * e1000_enable_mng_pass_thru - Enable processing of ARP's
++ * e1000e_enable_mng_pass_thru - Enable processing of ARP's
+ * @hw: pointer to the HW structure
+ *
+ * Verifies the hardware needs to allow ARPs to be processed by the host.
+ **/
-+bool e1000_enable_mng_pass_thru(struct e1000_hw *hw)
++bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+ u32 fwsm, factps;
+ bool ret_val = false;
+
-+ DEBUGFUNC("e1000_enable_mng_pass_thru");
-+
+ if (!hw->mac.asf_firmware_present)
+ goto out;
+
-+ manc = E1000_READ_REG(hw, E1000_MANC);
++ manc = er32(MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+ !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ goto out;
+
+ if (hw->mac.arc_subsystem_valid) {
-+ fwsm = E1000_READ_REG(hw, E1000_FWSM);
-+ factps = E1000_READ_REG(hw, E1000_FACTPS);
++ fwsm = er32(FWSM);
++ factps = er32(FACTPS);
+
+ if (!(factps & E1000_FACTPS_MNGCG) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_manage.h linux-2.6.22-10/drivers/net/e1000e/e1000_manage.h
--- linux-2.6.22-0/drivers/net/e1000e/e1000_manage.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_manage.h 2008-10-14 01:51:32.000000000 +0200
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_manage.h 2009-06-24 00:32:20.000000000 +0200
@@ -0,0 +1,82 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+#define _E1000_MANAGE_H_
+
+bool e1000_check_mng_mode_generic(struct e1000_hw *hw);
-+bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw);
++bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
+s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw);
+s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer,
+ u16 length, u16 offset, u8 *sum);
+s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw,
+ struct e1000_host_mng_command_header *hdr);
-+s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw,
++s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw,
+ u8 *buffer, u16 length);
-+bool e1000_enable_mng_pass_thru(struct e1000_hw *hw);
++bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
+
-+typedef enum {
++enum e1000_mng_mode {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_if_only
-+} e1000_mng_mode;
++};
+
+#define E1000_FACTPS_MNGCG 0x20000000
+
+#endif
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_nvm.c linux-2.6.22-10/drivers/net/e1000e/e1000_nvm.c
--- linux-2.6.22-0/drivers/net/e1000e/e1000_nvm.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_nvm.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,875 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_nvm.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,594 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+
+*******************************************************************************/
+
-+#include "e1000_hw.h"
++#include "e1000.h"
++
++static void e1000_stop_nvm(struct e1000_hw *hw);
++static void e1000e_reload_nvm(struct e1000_hw *hw);
+
+/**
+ * e1000_init_nvm_ops_generic - Initialize NVM function pointers
+void e1000_init_nvm_ops_generic(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ DEBUGFUNC("e1000_init_nvm_ops_generic");
-+
+ /* Initialize function pointers */
-+ nvm->ops.reload = e1000_reload_nvm_generic;
++ nvm->ops.reload = e1000e_reload_nvm;
+}
+
+/**
+static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd | E1000_EECD_SK;
-+ E1000_WRITE_REG(hw, E1000_EECD, *eecd);
-+ E1000_WRITE_FLUSH(hw);
-+ usec_delay(hw->nvm.delay_usec);
++ ew32(EECD, *eecd);
++ e1e_flush();
++ udelay(hw->nvm.delay_usec);
+}
+
+/**
+static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd & ~E1000_EECD_SK;
-+ E1000_WRITE_REG(hw, E1000_EECD, *eecd);
-+ E1000_WRITE_FLUSH(hw);
-+ usec_delay(hw->nvm.delay_usec);
++ ew32(EECD, *eecd);
++ e1e_flush();
++ udelay(hw->nvm.delay_usec);
+}
+
+/**
+static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ u32 eecd = E1000_READ_REG(hw, E1000_EECD);
++ u32 eecd = er32(EECD);
+ u32 mask;
+
-+ DEBUGFUNC("e1000_shift_out_eec_bits");
-+
+ mask = 0x01 << (count - 1);
-+ if (nvm->type == e1000_nvm_eeprom_microwire)
-+ eecd &= ~E1000_EECD_DO;
-+ else if (nvm->type == e1000_nvm_eeprom_spi)
++ if (nvm->type == e1000_nvm_eeprom_spi)
+ eecd |= E1000_EECD_DO;
+
+ do {
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ E1000_WRITE_FLUSH(hw);
++ ew32(EECD, eecd);
++ e1e_flush();
+
-+ usec_delay(nvm->delay_usec);
++ udelay(nvm->delay_usec);
+
+ e1000_raise_eec_clk(hw, &eecd);
+ e1000_lower_eec_clk(hw, &eecd);
+ } while (mask);
+
+ eecd &= ~E1000_EECD_DI;
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
++ ew32(EECD, eecd);
+}
+
+/**
+ u32 i;
+ u16 data;
+
-+ DEBUGFUNC("e1000_shift_in_eec_bits");
-+
-+ eecd = E1000_READ_REG(hw, E1000_EECD);
-+
++ eecd = er32(EECD);
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ data <<= 1;
+ e1000_raise_eec_clk(hw, &eecd);
+
-+ eecd = E1000_READ_REG(hw, E1000_EECD);
++ eecd = er32(EECD);
+
+ eecd &= ~E1000_EECD_DI;
+ if (eecd & E1000_EECD_DO)
+}
+
+/**
-+ * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion
++ * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ * @hw: pointer to the HW structure
+ * @ee_reg: EEPROM flag for polling
+ *
+ * Polls the EEPROM status bit for either read or write completion based
+ * upon the value of 'ee_reg'.
+ **/
-+s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
++s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+ s32 ret_val = -E1000_ERR_NVM;
+
-+ DEBUGFUNC("e1000_poll_eerd_eewr_done");
-+
+ for (i = 0; i < attempts; i++) {
+ if (ee_reg == E1000_NVM_POLL_READ)
-+ reg = E1000_READ_REG(hw, E1000_EERD);
++ reg = er32(EERD);
+ else
-+ reg = E1000_READ_REG(hw, E1000_EEWR);
++ reg = er32(EEWR);
+
+ if (reg & E1000_NVM_RW_REG_DONE) {
+ ret_val = E1000_SUCCESS;
+ break;
+ }
+
-+ usec_delay(5);
++ udelay(5);
+ }
+
+ return ret_val;
+}
+
+/**
-+ * e1000_acquire_nvm_generic - Generic request for access to EEPROM
++ * e1000e_acquire_nvm - Generic request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
-+s32 e1000_acquire_nvm_generic(struct e1000_hw *hw)
++s32 e1000e_acquire_nvm(struct e1000_hw *hw)
+{
-+ u32 eecd = E1000_READ_REG(hw, E1000_EECD);
++ u32 eecd = er32(EECD);
+ s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_acquire_nvm_generic");
-+
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ);
-+ eecd = E1000_READ_REG(hw, E1000_EECD);
-+
++ ew32(EECD, eecd | E1000_EECD_REQ);
++ eecd = er32(EECD);
+ while (timeout) {
+ if (eecd & E1000_EECD_GNT)
+ break;
-+ usec_delay(5);
-+ eecd = E1000_READ_REG(hw, E1000_EECD);
++ udelay(5);
++ eecd = er32(EECD);
+ timeout--;
+ }
+
+ if (!timeout) {
+ eecd &= ~E1000_EECD_REQ;
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ DEBUGOUT("Could not acquire NVM grant\n");
++ ew32(EECD, eecd);
++ e_dbg("Could not acquire NVM grant\n");
+ ret_val = -E1000_ERR_NVM;
+ }
+
+static void e1000_standby_nvm(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ u32 eecd = E1000_READ_REG(hw, E1000_EECD);
++ u32 eecd = er32(EECD);
+
-+ DEBUGFUNC("e1000_standby_nvm");
-+
-+ if (nvm->type == e1000_nvm_eeprom_microwire) {
-+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ E1000_WRITE_FLUSH(hw);
-+ usec_delay(nvm->delay_usec);
-+
-+ e1000_raise_eec_clk(hw, &eecd);
-+
-+ /* Select EEPROM */
-+ eecd |= E1000_EECD_CS;
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ E1000_WRITE_FLUSH(hw);
-+ usec_delay(nvm->delay_usec);
-+
-+ e1000_lower_eec_clk(hw, &eecd);
-+ } else if (nvm->type == e1000_nvm_eeprom_spi) {
++ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ E1000_WRITE_FLUSH(hw);
-+ usec_delay(nvm->delay_usec);
++ ew32(EECD, eecd);
++ e1e_flush();
++ udelay(nvm->delay_usec);
+ eecd &= ~E1000_EECD_CS;
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ E1000_WRITE_FLUSH(hw);
-+ usec_delay(nvm->delay_usec);
++ ew32(EECD, eecd);
++ e1e_flush();
++ udelay(nvm->delay_usec);
+ }
+}
+
+ *
+ * Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
-+void e1000_stop_nvm(struct e1000_hw *hw)
++static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
-+ DEBUGFUNC("e1000_stop_nvm");
-+
-+ eecd = E1000_READ_REG(hw, E1000_EECD);
++ eecd = er32(EECD);
+ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+ /* Pull CS high */
+ eecd |= E1000_EECD_CS;
+ e1000_lower_eec_clk(hw, &eecd);
-+ } else if (hw->nvm.type == e1000_nvm_eeprom_microwire) {
-+ /* CS on Microwire is active-high */
-+ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ e1000_raise_eec_clk(hw, &eecd);
-+ e1000_lower_eec_clk(hw, &eecd);
+ }
+}
+
+/**
-+ * e1000_release_nvm_generic - Release exclusive access to EEPROM
++ * e1000e_release_nvm - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
-+void e1000_release_nvm_generic(struct e1000_hw *hw)
++void e1000e_release_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
-+ DEBUGFUNC("e1000_release_nvm_generic");
-+
+ e1000_stop_nvm(hw);
+
-+ eecd = E1000_READ_REG(hw, E1000_EECD);
++ eecd = er32(EECD);
+ eecd &= ~E1000_EECD_REQ;
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
++ ew32(EECD, eecd);
+}
+
+/**
+static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ u32 eecd = E1000_READ_REG(hw, E1000_EECD);
++ u32 eecd = er32(EECD);
+ s32 ret_val = E1000_SUCCESS;
+ u16 timeout = 0;
+ u8 spi_stat_reg;
+
-+ DEBUGFUNC("e1000_ready_nvm_eeprom");
-+
-+ if (nvm->type == e1000_nvm_eeprom_microwire) {
-+ /* Clear SK and DI */
-+ eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ /* Set CS */
-+ eecd |= E1000_EECD_CS;
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ } else if (nvm->type == e1000_nvm_eeprom_spi) {
++ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-+ E1000_WRITE_REG(hw, E1000_EECD, eecd);
-+ usec_delay(1);
++ ew32(EECD, eecd);
++ udelay(1);
+ timeout = NVM_MAX_RETRY_SPI;
+
+ /*
+ if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+ break;
+
-+ usec_delay(5);
++ udelay(5);
+ e1000_standby_nvm(hw);
+ timeout--;
+ }
+
+ if (!timeout) {
-+ DEBUGOUT("SPI NVM Status error\n");
++ e_dbg("SPI NVM Status error\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+}
+
+/**
-+ * e1000_read_nvm_spi - Read EEPROM's using SPI
-+ * @hw: pointer to the HW structure
-+ * @offset: offset of word in the EEPROM to read
-+ * @words: number of words to read
-+ * @data: word read from the EEPROM
-+ *
-+ * Reads a 16 bit word from the EEPROM.
-+ **/
-+s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-+{
-+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ u32 i = 0;
-+ s32 ret_val;
-+ u16 word_in;
-+ u8 read_opcode = NVM_READ_OPCODE_SPI;
-+
-+ DEBUGFUNC("e1000_read_nvm_spi");
-+
-+ /*
-+ * A check for invalid values: offset too large, too many words,
-+ * and not enough words.
-+ */
-+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
-+ (words == 0)) {
-+ DEBUGOUT("nvm parameter(s) out of bounds\n");
-+ ret_val = -E1000_ERR_NVM;
-+ goto out;
-+ }
-+
-+ ret_val = nvm->ops.acquire(hw);
-+ if (ret_val)
-+ goto out;
-+
-+ ret_val = e1000_ready_nvm_eeprom(hw);
-+ if (ret_val)
-+ goto release;
-+
-+ e1000_standby_nvm(hw);
-+
-+ if ((nvm->address_bits == 8) && (offset >= 128))
-+ read_opcode |= NVM_A8_OPCODE_SPI;
-+
-+ /* Send the READ command (opcode + addr) */
-+ e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
-+ e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
-+
-+ /*
-+ * Read the data. SPI NVMs increment the address with each byte
-+ * read and will roll over if reading beyond the end. This allows
-+ * us to read the whole NVM from any offset
-+ */
-+ for (i = 0; i < words; i++) {
-+ word_in = e1000_shift_in_eec_bits(hw, 16);
-+ data[i] = (word_in >> 8) | (word_in << 8);
-+ }
-+
-+release:
-+ nvm->ops.release(hw);
-+
-+out:
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_read_nvm_microwire - Reads EEPROM's using microwire
-+ * @hw: pointer to the HW structure
-+ * @offset: offset of word in the EEPROM to read
-+ * @words: number of words to read
-+ * @data: word read from the EEPROM
-+ *
-+ * Reads a 16 bit word from the EEPROM.
-+ **/
-+s32 e1000_read_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words,
-+ u16 *data)
-+{
-+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ u32 i = 0;
-+ s32 ret_val;
-+ u8 read_opcode = NVM_READ_OPCODE_MICROWIRE;
-+
-+ DEBUGFUNC("e1000_read_nvm_microwire");
-+
-+ /*
-+ * A check for invalid values: offset too large, too many words,
-+ * and not enough words.
-+ */
-+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
-+ (words == 0)) {
-+ DEBUGOUT("nvm parameter(s) out of bounds\n");
-+ ret_val = -E1000_ERR_NVM;
-+ goto out;
-+ }
-+
-+ ret_val = nvm->ops.acquire(hw);
-+ if (ret_val)
-+ goto out;
-+
-+ ret_val = e1000_ready_nvm_eeprom(hw);
-+ if (ret_val)
-+ goto release;
-+
-+ for (i = 0; i < words; i++) {
-+ /* Send the READ command (opcode + addr) */
-+ e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
-+ e1000_shift_out_eec_bits(hw, (u16)(offset + i),
-+ nvm->address_bits);
-+
-+ /*
-+ * Read the data. For microwire, each word requires the
-+ * overhead of setup and tear-down.
-+ */
-+ data[i] = e1000_shift_in_eec_bits(hw, 16);
-+ e1000_standby_nvm(hw);
-+ }
-+
-+release:
-+ nvm->ops.release(hw);
-+
-+out:
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_read_nvm_eerd - Reads EEPROM using EERD register
++ * e1000e_read_nvm_eerd - Reads EEPROM using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
-+s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
++s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, eerd = 0;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_read_nvm_eerd");
-+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * too many words for the offset, and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
-+ DEBUGOUT("nvm parameter(s) out of bounds\n");
++ e_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+ eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
+ E1000_NVM_RW_REG_START;
+
-+ E1000_WRITE_REG(hw, E1000_EERD, eerd);
-+ ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
++ ew32(EERD, eerd);
++ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+ if (ret_val)
+ break;
+
-+ data[i] = (E1000_READ_REG(hw, E1000_EERD) >>
++ data[i] = (er32(EERD) >>
+ E1000_NVM_RW_REG_DATA);
+ }
+
+}
+
+/**
-+ * e1000_write_nvm_spi - Write to EEPROM using SPI
++ * e1000e_write_nvm_spi - Write to EEPROM using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * If e1000_update_nvm_checksum is not called after this function , the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
-+s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
++s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ s32 ret_val;
+ u16 widx = 0;
+
-+ DEBUGFUNC("e1000_write_nvm_spi");
-+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
-+ DEBUGOUT("nvm parameter(s) out of bounds\n");
++ e_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+ }
+ }
+
-+ msec_delay(nvm->semaphore_delay);
-+release:
-+ nvm->ops.release(hw);
-+
-+out:
-+ return ret_val;
-+}
-+
-+/**
-+ * e1000_write_nvm_microwire - Writes EEPROM using microwire
-+ * @hw: pointer to the HW structure
-+ * @offset: offset within the EEPROM to be written to
-+ * @words: number of words to write
-+ * @data: 16 bit word(s) to be written to the EEPROM
-+ *
-+ * Writes data to EEPROM at offset using microwire interface.
-+ *
-+ * If e1000_update_nvm_checksum is not called after this function , the
-+ * EEPROM will most likely contain an invalid checksum.
-+ **/
-+s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words,
-+ u16 *data)
-+{
-+ struct e1000_nvm_info *nvm = &hw->nvm;
-+ s32 ret_val;
-+ u32 eecd;
-+ u16 words_written = 0;
-+ u16 widx = 0;
-+
-+ DEBUGFUNC("e1000_write_nvm_microwire");
-+
-+ /*
-+ * A check for invalid values: offset too large, too many words,
-+ * and not enough words.
-+ */
-+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
-+ (words == 0)) {
-+ DEBUGOUT("nvm parameter(s) out of bounds\n");
-+ ret_val = -E1000_ERR_NVM;
-+ goto out;
-+ }
-+
-+ ret_val = nvm->ops.acquire(hw);
-+ if (ret_val)
-+ goto out;
-+
-+ ret_val = e1000_ready_nvm_eeprom(hw);
-+ if (ret_val)
-+ goto release;
-+
-+ e1000_shift_out_eec_bits(hw, NVM_EWEN_OPCODE_MICROWIRE,
-+ (u16)(nvm->opcode_bits + 2));
-+
-+ e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2));
-+
-+ e1000_standby_nvm(hw);
-+
-+ while (words_written < words) {
-+ e1000_shift_out_eec_bits(hw, NVM_WRITE_OPCODE_MICROWIRE,
-+ nvm->opcode_bits);
-+
-+ e1000_shift_out_eec_bits(hw, (u16)(offset + words_written),
-+ nvm->address_bits);
-+
-+ e1000_shift_out_eec_bits(hw, data[words_written], 16);
-+
-+ e1000_standby_nvm(hw);
-+
-+ for (widx = 0; widx < 200; widx++) {
-+ eecd = E1000_READ_REG(hw, E1000_EECD);
-+ if (eecd & E1000_EECD_DO)
-+ break;
-+ usec_delay(50);
-+ }
-+
-+ if (widx == 200) {
-+ DEBUGOUT("NVM Write did not complete\n");
-+ ret_val = -E1000_ERR_NVM;
-+ goto release;
-+ }
-+
-+ e1000_standby_nvm(hw);
-+
-+ words_written++;
-+ }
-+
-+ e1000_shift_out_eec_bits(hw, NVM_EWDS_OPCODE_MICROWIRE,
-+ (u16)(nvm->opcode_bits + 2));
-+
-+ e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2));
-+
++ msleep(10);
+release:
+ nvm->ops.release(hw);
+
+}
+
+/**
-+ * e1000_read_pba_num_generic - Read device part number
++ * e1000e_read_pba_num - Read device part number
+ * @hw: pointer to the HW structure
+ * @pba_num: pointer to device part number
+ *
+ * Reads the product board assembly (PBA) number from the EEPROM and stores
+ * the value in pba_num.
+ **/
-+s32 e1000_read_pba_num_generic(struct e1000_hw *hw, u32 *pba_num)
++s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num)
+{
+ s32 ret_val;
+ u16 nvm_data;
+
-+ DEBUGFUNC("e1000_read_pba_num_generic");
-+
-+ ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
++ ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
++ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+ *pba_num = (u32)(nvm_data << 16);
+
-+ ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
++ ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
++ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+ *pba_num |= nvm_data;
+}
+
+/**
-+ * e1000_read_mac_addr_generic - Read device MAC address
++ * e1000e_read_mac_addr_generic - Read device MAC address
+ * @hw: pointer to the HW structure
+ *
+ * Reads the device MAC address from the EEPROM and stores the value.
+ * Since devices with two ports use the same EEPROM, we increment the
+ * last bit in the MAC address for the second port.
+ **/
-+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
++s32 e1000e_read_mac_addr_generic(struct e1000_hw *hw)
+{
-+ s32 ret_val = E1000_SUCCESS;
-+ u16 offset, nvm_data, i;
++ u32 rar_high;
++ u32 rar_low;
++ u16 i;
+
-+ DEBUGFUNC("e1000_read_mac_addr");
++ rar_high = er32(RAH(0));
++ rar_low = er32(RAL(0));
+
-+ for (i = 0; i < ETH_ADDR_LEN; i += 2) {
-+ offset = i >> 1;
-+ ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
-+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
-+ goto out;
-+ }
-+ hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF);
-+ hw->mac.perm_addr[i+1] = (u8)(nvm_data >> 8);
-+ }
++ for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
++ hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
+
-+ /* Flip last bit of mac address if we're on second port */
-+ if (hw->bus.func == E1000_FUNC_1)
-+ hw->mac.perm_addr[5] ^= 1;
++ for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
++ hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
+
+ for (i = 0; i < ETH_ADDR_LEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
-+out:
-+ return ret_val;
++ return E1000_SUCCESS;
+}
+
+/**
-+ * e1000_validate_nvm_checksum_generic - Validate EEPROM checksum
++ * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
-+s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw)
++s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
-+ DEBUGFUNC("e1000_validate_nvm_checksum_generic");
-+
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
-+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
++ ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error\n");
++ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16) NVM_SUM) {
-+ DEBUGOUT("NVM Checksum Invalid\n");
++ e_dbg("NVM Checksum Invalid\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+}
+
+/**
-+ * e1000_update_nvm_checksum_generic - Update EEPROM checksum
++ * e1000e_update_nvm_checksum_generic - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
-+s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw)
++s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
-+ DEBUGFUNC("e1000_update_nvm_checksum");
-+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
-+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
++ ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
+ if (ret_val) {
-+ DEBUGOUT("NVM Read Error while updating checksum.\n");
++ e_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
-+ ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
-+ if (ret_val) {
-+ DEBUGOUT("NVM Write Error while updating checksum.\n");
-+ }
++ ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
++ if (ret_val)
++ e_dbg("NVM Write Error while updating checksum.\n");
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_reload_nvm_generic - Reloads EEPROM
++ * e1000e_reload_nvm - Reloads EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
+ * extended control register.
+ **/
-+void e1000_reload_nvm_generic(struct e1000_hw *hw)
++static void e1000e_reload_nvm(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+
-+ DEBUGFUNC("e1000_reload_nvm_generic");
-+
-+ usec_delay(10);
-+ ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
++ udelay(10);
++ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
-+ E1000_WRITE_FLUSH(hw);
++ ew32(CTRL_EXT, ctrl_ext);
++ e1e_flush();
+}
+
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_nvm.h linux-2.6.22-10/drivers/net/e1000e/e1000_nvm.h
--- linux-2.6.22-0/drivers/net/e1000e/e1000_nvm.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_nvm.h 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,58 @@
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_nvm.h 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,51 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+#define _E1000_NVM_H_
+
+void e1000_init_nvm_ops_generic(struct e1000_hw *hw);
-+s32 e1000_acquire_nvm_generic(struct e1000_hw *hw);
-+
-+s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw);
-+s32 e1000_read_pba_num_generic(struct e1000_hw *hw, u32 *pba_num);
-+s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-+s32 e1000_read_nvm_microwire(struct e1000_hw *hw, u16 offset,
-+ u16 words, u16 *data);
-+s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words,
++s32 e1000e_acquire_nvm(struct e1000_hw *hw);
++
++s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
++s32 e1000e_read_mac_addr_generic(struct e1000_hw *hw);
++s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
++s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
-+s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data);
-+s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw);
++s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
++s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
+s32 e1000_write_nvm_eewr(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
-+s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset,
-+ u16 words, u16 *data);
-+s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words,
++s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
-+s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw);
-+void e1000_stop_nvm(struct e1000_hw *hw);
-+void e1000_release_nvm_generic(struct e1000_hw *hw);
-+void e1000_reload_nvm_generic(struct e1000_hw *hw);
++s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
++void e1000e_release_nvm(struct e1000_hw *hw);
+
+#define E1000_STM_OPCODE 0xDB00
+
+#endif
-diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_osdep.h linux-2.6.22-10/drivers/net/e1000e/e1000_osdep.h
---- linux-2.6.22-0/drivers/net/e1000e/e1000_osdep.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_osdep.h 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,116 @@
+diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_phy.c linux-2.6.22-10/drivers/net/e1000e/e1000_phy.c
+--- linux-2.6.22-0/drivers/net/e1000e/e1000_phy.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_phy.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,3137 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+
+*******************************************************************************/
+
++#include "e1000.h"
+
-+/* glue for the OS-dependent part of e1000
-+ * includes register access macros
-+ */
-+
-+#ifndef _E1000_OSDEP_H_
-+#define _E1000_OSDEP_H_
-+
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/if_ether.h>
++static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
++static s32 e1000_copper_link_autoneg(struct e1000_hw *hw);
++static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg);
++static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
++ u16 *data, bool read);
++static u32 e1000_get_phy_addr_for_hv_page(u32 page);
++static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
++ u16 *data, bool read);
+
-+#include "kcompat.h"
-+
-+#define usec_delay(x) udelay(x)
-+#ifndef msec_delay
-+#define msec_delay(x) do { if(in_interrupt()) { \
-+ /* Don't sleep in interrupt context! */ \
-+ BUG(); \
-+ } else { \
-+ msleep(x); \
-+ } } while (0)
-+
-+/* Some workarounds require millisecond delays and are run during interrupt
-+ * context. Most notably, when establishing link, the phy may need tweaking
-+ * but cannot process phy register reads/writes faster than millisecond
-+ * intervals...and we establish link due to a "link status change" interrupt.
-+ */
-+#define msec_delay_irq(x) mdelay(x)
-+#endif
-+
-+#define PCI_COMMAND_REGISTER PCI_COMMAND
-+#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
-+#define ETH_ADDR_LEN ETH_ALEN
-+
-+
-+#define DEBUGOUT(S)
-+#define DEBUGOUT1(S, A...)
-+
-+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
-+#define DEBUGOUT2 DEBUGOUT1
-+#define DEBUGOUT3 DEBUGOUT2
-+#define DEBUGOUT7 DEBUGOUT3
-+
-+#define E1000_WRITE_REG(a, reg, value) ( \
-+ writel((value), ((a)->hw_addr + reg)))
-+
-+#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + reg))
-+
-+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
-+ writel((value), ((a)->hw_addr + reg + ((offset) << 2))))
-+
-+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
-+ readl((a)->hw_addr + reg + ((offset) << 2)))
-+
-+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
-+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
-+
-+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
-+ writew((value), ((a)->hw_addr + reg + ((offset) << 1))))
-+
-+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
-+ readw((a)->hw_addr + reg + ((offset) << 1)))
-+
-+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
-+ writeb((value), ((a)->hw_addr + reg + (offset))))
-+
-+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
-+ readb((a)->hw_addr + reg + (offset)))
-+
-+#define E1000_WRITE_REG_IO(a, reg, offset) do { \
-+ outl(reg, ((a)->io_base)); \
-+ outl(offset, ((a)->io_base + 4)); } while(0)
-+
-+#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS)
-+
-+#define E1000_WRITE_FLASH_REG(a, reg, value) ( \
-+ writel((value), ((a)->flash_address + reg)))
-+
-+#define E1000_WRITE_FLASH_REG16(a, reg, value) ( \
-+ writew((value), ((a)->flash_address + reg)))
-+
-+#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg))
-+
-+#define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg))
-+
-+#endif /* _E1000_OSDEP_H_ */
-diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_phy.c linux-2.6.22-10/drivers/net/e1000e/e1000_phy.c
---- linux-2.6.22-0/drivers/net/e1000e/e1000_phy.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_phy.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,2489 @@
-+/*******************************************************************************
-+
-+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms and conditions of the GNU General Public License,
-+ version 2, as published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ more details.
-+
-+ You should have received a copy of the GNU General Public License along with
-+ this program; if not, write to the Free Software Foundation, Inc.,
-+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-+
-+ The full GNU General Public License is included in this distribution in
-+ the file called "COPYING".
-+
-+ Contact Information:
-+ Linux NICS <linux.nics@intel.com>
-+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-+
-+*******************************************************************************/
-+
-+#include "e1000_hw.h"
-+
-+static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg);
-+/* Cable length tables */
-+static const u16 e1000_m88_cable_length_table[] =
-+ { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
-+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
-+ (sizeof(e1000_m88_cable_length_table) / \
-+ sizeof(e1000_m88_cable_length_table[0]))
++/* Cable length tables */
++static const u16 e1000_m88_cable_length_table[] =
++ { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
++#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
++ (sizeof(e1000_m88_cable_length_table) / \
++ sizeof(e1000_m88_cable_length_table[0]))
+
+static const u16 e1000_igp_2_cable_length_table[] =
+ { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
+ sizeof(e1000_igp_2_cable_length_table[0]))
+
+/**
-+ * e1000_check_reset_block_generic - Check if PHY reset is blocked
++ * e1000e_check_reset_block_generic - Check if PHY reset is blocked
+ * @hw: pointer to the HW structure
+ *
+ * Read the PHY management control register and check whether a PHY reset
+ * is blocked. If a reset is not blocked return E1000_SUCCESS, otherwise
+ * return E1000_BLK_PHY_RESET (12).
+ **/
-+s32 e1000_check_reset_block_generic(struct e1000_hw *hw)
++s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
+{
+ u32 manc;
+
-+ DEBUGFUNC("e1000_check_reset_block");
-+
-+ manc = E1000_READ_REG(hw, E1000_MANC);
++ manc = er32(MANC);
+
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
+ E1000_BLK_PHY_RESET : E1000_SUCCESS;
+}
+
+/**
-+ * e1000_get_phy_id - Retrieve the PHY ID and revision
++ * e1000e_get_phy_id - Retrieve the PHY ID and revision
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY registers and stores the PHY ID and possibly the PHY
+ * revision in the hardware structure.
+ **/
-+s32 e1000_get_phy_id(struct e1000_hw *hw)
++s32 e1000e_get_phy_id(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+ u16 phy_id;
-+
-+ DEBUGFUNC("e1000_get_phy_id");
++ u16 retry_count = 0;
+
+ if (!(phy->ops.read_reg))
+ goto out;
+
-+ ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
-+ if (ret_val)
-+ goto out;
++ while (retry_count < 2) {
++ ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
++ if (ret_val)
++ goto out;
+
-+ phy->id = (u32)(phy_id << 16);
-+ usec_delay(20);
-+ ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
-+ if (ret_val)
-+ goto out;
++ phy->id = (u32)(phy_id << 16);
++ udelay(20);
++ ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
++ if (ret_val)
++ goto out;
+
-+ phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
-+ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
++ phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
++ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
++
++ if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
++ goto out;
++
++ /*
++ * If the PHY ID is still unknown, we may have an 82577 without link.
++ * We will try again after setting Slow MDIC mode. No harm in trying
++ * again in this case since the PHY ID is unknown at this point anyway
++ */
++ ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
++ if (ret_val)
++ goto out;
+
++ retry_count++;
++ }
+out:
++ /* Revert to MDIO fast mode, if applicable */
++ if (retry_count)
++ ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
++
+ return ret_val;
+}
+
+/**
-+ * e1000_phy_reset_dsp_generic - Reset PHY DSP
++ * e1000e_phy_reset_dsp - Reset PHY DSP
+ * @hw: pointer to the HW structure
+ *
+ * Reset the digital signal processor.
+ **/
-+s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw)
++s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_phy_reset_dsp_generic");
-+
+ if (!(hw->phy.ops.write_reg))
+ goto out;
+
-+ ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
++ ret_val = e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
+ if (ret_val)
+ goto out;
+
-+ ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0);
++ ret_val = e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0);
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_read_phy_reg_mdic - Read MDI control register
++ * e1000e_read_phy_reg_mdic - Read MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ * Reads the MDI control register in the PHY at offset and stores the
+ * information read to data.
+ **/
-+s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_read_phy_reg_mdic");
-+
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
-+ E1000_WRITE_REG(hw, E1000_MDIC, mdic);
++ ew32(MDIC, mdic);
+
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-+ usec_delay(50);
-+ mdic = E1000_READ_REG(hw, E1000_MDIC);
++ udelay(50);
++ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
-+ DEBUGOUT("MDI Read did not complete\n");
++ e_dbg("MDI Read did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
-+ DEBUGOUT("MDI Error\n");
++ e_dbg("MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+}
+
+/**
-+ * e1000_write_phy_reg_mdic - Write MDI control register
++ * e1000e_write_phy_reg_mdic - Write MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
-+s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
++s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_write_phy_reg_mdic");
-+
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
-+ E1000_WRITE_REG(hw, E1000_MDIC, mdic);
++ ew32(MDIC, mdic);
+
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-+ usec_delay(50);
-+ mdic = E1000_READ_REG(hw, E1000_MDIC);
++ udelay(50);
++ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
-+ DEBUGOUT("MDI Write did not complete\n");
++ e_dbg("MDI Write did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
-+ DEBUGOUT("MDI Error\n");
++ e_dbg("MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+}
+
+/**
-+ * e1000_read_phy_reg_m88 - Read m88 PHY register
++ * e1000e_read_phy_reg_m88 - Read m88 PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
-+s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_read_phy_reg_m88");
-+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ if (ret_val)
+ goto out;
+
-+ ret_val = e1000_read_phy_reg_mdic(hw,
-+ MAX_PHY_REG_ADDRESS & offset,
++ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+}
+
+/**
-+ * e1000_write_phy_reg_m88 - Write m88 PHY register
++ * e1000e_write_phy_reg_m88 - Write m88 PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
-+s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
++s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_write_phy_reg_m88");
-+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ if (ret_val)
+ goto out;
+
-+ ret_val = e1000_write_phy_reg_mdic(hw,
-+ MAX_PHY_REG_ADDRESS & offset,
++ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+}
+
+/**
-+ * e1000_read_phy_reg_igp - Read igp PHY register
++ * e1000e_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
-+s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_read_phy_reg_igp");
-+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
-+ ret_val = e1000_write_phy_reg_mdic(hw,
++ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ }
+ }
+
-+ ret_val = e1000_read_phy_reg_mdic(hw,
-+ MAX_PHY_REG_ADDRESS & offset,
++ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+}
+
+/**
-+ * e1000_write_phy_reg_igp - Write igp PHY register
++ * e1000e_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
-+s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
++s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_write_phy_reg_igp");
-+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
-+ ret_val = e1000_write_phy_reg_mdic(hw,
++ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ }
+ }
+
-+ ret_val = e1000_write_phy_reg_mdic(hw,
-+ MAX_PHY_REG_ADDRESS & offset,
++ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+}
+
+/**
-+ * e1000_read_kmrn_reg_generic - Read kumeran register
++ * e1000e_read_kmrn_reg - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ * using the kumeran interface. The information retrieved is stored in data.
+ * Release any acquired semaphores before exiting.
+ **/
-+s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ u32 kmrnctrlsta;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_read_kmrn_reg_generic");
-+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+
+ kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+ E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
-+ E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta);
++ ew32(KMRNCTRLSTA, kmrnctrlsta);
+
-+ usec_delay(2);
++ udelay(2);
+
-+ kmrnctrlsta = E1000_READ_REG(hw, E1000_KMRNCTRLSTA);
++ kmrnctrlsta = er32(KMRNCTRLSTA);
+ *data = (u16)kmrnctrlsta;
+
+ hw->phy.ops.release(hw);
+}
+
+/**
-+ * e1000_write_kmrn_reg_generic - Write kumeran register
++ * e1000e_write_kmrn_reg - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ * at the offset using the kumeran interface. Release any acquired semaphores
+ * before exiting.
+ **/
-+s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data)
++s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ u32 kmrnctrlsta;
+ s32 ret_val = E1000_SUCCESS;
+
-+ DEBUGFUNC("e1000_write_kmrn_reg_generic");
-+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+
+ kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+ E1000_KMRNCTRLSTA_OFFSET) | data;
-+ E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta);
++ ew32(KMRNCTRLSTA, kmrnctrlsta);
+
-+ usec_delay(2);
++ udelay(2);
+ hw->phy.ops.release(hw);
+
+out:
+}
+
+/**
-+ * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link
++ * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
++ * @hw: pointer to the HW structure
++ *
++ * Sets up Carrier-sense on Transmit and downshift values.
++ **/
++s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
++{
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val;
++ u16 phy_data;
++
++ if (phy->reset_disable) {
++ ret_val = E1000_SUCCESS;
++ goto out;
++ }
++
++ /* Enable CRS on TX. This must be set for half-duplex operation. */
++ ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
++ if (ret_val)
++ goto out;
++
++ phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
++
++ /* Enable downshift */
++ phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
++
++ ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
++ if (ret_val)
++ goto out;
++
++ /* Set number of link attempts before downshift */
++ ret_val = e1e_rphy(hw, I82577_CTRL_REG, &phy_data);
++ if (ret_val)
++ goto out;
++ phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK;
++ ret_val = e1e_wphy(hw, I82577_CTRL_REG, phy_data);
++
++out:
++ return ret_val;
++}
++
++/**
++ * e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
+ * and downshift values are set also.
+ **/
-+s32 e1000_copper_link_setup_m88(struct e1000_hw *hw)
++s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
-+ DEBUGFUNC("e1000_copper_link_setup_m88");
-+
+ if (phy->reset_disable) {
+ ret_val = E1000_SUCCESS;
+ goto out;
+ }
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
-+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
++ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
-+ /* For newer PHYs this bit is downshift enable */
-+ if (phy->type == e1000_phy_m88)
++ /* For BM PHY this bit is downshift enable */
++ if (phy->type != e1000_phy_bm)
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /*
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (phy->mdix) {
-+ case 1:
-+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
-+ break;
-+ case 2:
-+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
-+ break;
-+ case 3:
-+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
-+ break;
-+ case 0:
-+ default:
-+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
-+ break;
++ case 1:
++ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
++ break;
++ case 2:
++ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
++ break;
++ case 3:
++ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
++ break;
++ case 0:
++ default:
++ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
++ break;
+ }
+
+ /*
+ if (phy->type == e1000_phy_bm)
+ phy_data |= BME1000_PSCR_ENABLE_DOWNSHIFT;
+
-+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
++ ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ * Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
-+ ret_val = phy->ops.read_reg(hw,
-+ M88E1000_EXT_PHY_SPEC_CTRL,
++ ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ }
-+ ret_val = phy->ops.write_reg(hw,
-+ M88E1000_EXT_PHY_SPEC_CTRL,
++ ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+
+ if ((phy->type == e1000_phy_bm) && (phy->id == BME1000_E_PHY_ID_R2)) {
+ /* Set PHY page 0, register 29 to 0x0003 */
-+ ret_val = phy->ops.write_reg(hw, 29, 0x0003);
++ ret_val = e1e_wphy(hw, 29, 0x0003);
+ if (ret_val)
+ goto out;
+
+ /* Set PHY page 0, register 30 to 0x0000 */
-+ ret_val = phy->ops.write_reg(hw, 30, 0x0000);
++ ret_val = e1e_wphy(hw, 30, 0x0000);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Commit the changes. */
-+ ret_val = phy->ops.commit(hw);
++ ret_val = e1000e_commit_phy(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error committing the PHY changes\n");
++ e_dbg("Error committing the PHY changes\n");
+ goto out;
+ }
+
++ if (phy->type == e1000_phy_82578) {
++ ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL,
++ &phy_data);
++ if (ret_val)
++ goto out;
++
++ /* 82578 PHY - set the downshift count to 1x. */
++ phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
++ phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
++ ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL,
++ phy_data);
++ if (ret_val)
++ goto out;
++ }
++
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_copper_link_setup_igp - Setup igp PHY's for copper link
++ * e1000e_copper_link_setup_igp - Setup igp PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ * igp PHY's.
+ **/
-+s32 e1000_copper_link_setup_igp(struct e1000_hw *hw)
++s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
-+ DEBUGFUNC("e1000_copper_link_setup_igp");
-+
+ if (phy->reset_disable) {
+ ret_val = E1000_SUCCESS;
+ goto out;
+ }
+
-+ ret_val = hw->phy.ops.reset(hw);
++ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error resetting the PHY.\n");
++ e_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+
+ * Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+ * timeout issues when LFS is enabled.
+ */
-+ msec_delay(100);
++ msleep(100);
+
+ /*
+ * The NVM settings will configure LPLU in D3 for
+ /* disable lplu d3 during driver init */
+ ret_val = hw->phy.ops.set_d3_lplu_state(hw, false);
+ if (ret_val) {
-+ DEBUGOUT("Error Disabling LPLU D3\n");
++ e_dbg("Error Disabling LPLU D3\n");
+ goto out;
+ }
+ }
+ if (hw->phy.ops.set_d0_lplu_state) {
+ ret_val = hw->phy.ops.set_d0_lplu_state(hw, false);
+ if (ret_val) {
-+ DEBUGOUT("Error Disabling LPLU D0\n");
++ e_dbg("Error Disabling LPLU D0\n");
+ goto out;
+ }
+ }
+ /* Configure mdi-mdix settings */
-+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data);
++ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
-+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data);
++ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, data);
+ if (ret_val)
+ goto out;
+
+ */
+ if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
-+ ret_val = phy->ops.read_reg(hw,
++ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
++ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Set auto Master/Slave resolution process */
-+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
++ ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~CR_1000T_MS_ENABLE;
-+ ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
++ ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ goto out;
+ }
+
-+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
++ ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ default:
+ break;
+ }
-+ ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
++ ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ goto out;
+ }
+ * and restart the negotiation process between the link partner. If
+ * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
-+s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
++static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_ctrl;
+
-+ DEBUGFUNC("e1000_copper_link_autoneg");
-+
+ /*
+ * Perform some bounds checking on the autoneg advertisement
+ * parameter.
+ if (phy->autoneg_advertised == 0)
+ phy->autoneg_advertised = phy->autoneg_mask;
+
-+ DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
++ e_dbg("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error Setting up Auto-Negotiation\n");
++ e_dbg("Error Setting up Auto-Negotiation\n");
+ goto out;
+ }
-+ DEBUGOUT("Restarting Auto-Neg\n");
++ e_dbg("Restarting Auto-Neg\n");
+
+ /*
+ * Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
-+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
++ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
-+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
++ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ if (phy->autoneg_wait_to_complete) {
+ ret_val = hw->mac.ops.wait_autoneg(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error while waiting for "
++ e_dbg("Error while waiting for "
+ "autoneg to complete\n");
+ goto out;
+ }
+ * return successful. Otherwise, setup advertisement and flow control to
+ * the appropriate values for the wanted auto-negotiation.
+ **/
-+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
++static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg = 0;
+
-+ DEBUGFUNC("e1000_phy_setup_autoneg");
-+
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
-+ ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
++ ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ /* Read the MII 1000Base-T Control Register (Address 9). */
-+ ret_val = phy->ops.read_reg(hw,
-+ PHY_1000T_CTRL,
++ ret_val = e1e_rphy(hw, PHY_1000T_CTRL,
+ &mii_1000t_ctrl_reg);
+ if (ret_val)
+ goto out;
+ NWAY_AR_10T_HD_CAPS);
+ mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
+
-+ DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised);
++ e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
-+ DEBUGOUT("Advertise 10mb Half duplex\n");
++ e_dbg("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
-+ DEBUGOUT("Advertise 10mb Full duplex\n");
++ e_dbg("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
-+ DEBUGOUT("Advertise 100mb Half duplex\n");
++ e_dbg("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
-+ DEBUGOUT("Advertise 100mb Full duplex\n");
++ e_dbg("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
-+ if (phy->autoneg_advertised & ADVERTISE_1000_HALF) {
-+ DEBUGOUT("Advertise 1000mb Half duplex request denied!\n");
-+ }
++ if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
++ e_dbg("Advertise 1000mb Half duplex request denied!\n");
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
-+ DEBUGOUT("Advertise 1000mb Full duplex\n");
++ e_dbg("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
-+ switch (hw->fc.type) {
++ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ /*
+ * Flow control (Rx & Tx) is completely disabled by a
+ * Since there really isn't a way to advertise that we are
+ * capable of Rx Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric Rx PAUSE. Later
-+ * (in e1000_config_fc_after_link_up) we will disable the
++ * (in e1000e_config_fc_after_link_up) we will disable the
+ * hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
-+ DEBUGOUT("Flow control param set incorrectly\n");
++ e_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
-+ ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
++ ret_val = e1e_wphy(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
-+ DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
++ e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
-+ ret_val = phy->ops.write_reg(hw,
++ ret_val = e1e_wphy(hw,
+ PHY_1000T_CTRL,
+ mii_1000t_ctrl_reg);
+ if (ret_val)
+}
+
+/**
-+ * e1000_setup_copper_link_generic - Configure copper link settings
++ * e1000e_setup_copper_link - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Calls the appropriate function to configure the link for auto-neg or forced
+ * to configure collision distance and flow control are called. If link is
+ * not established, we return -E1000_ERR_PHY (-2).
+ **/
-+s32 e1000_setup_copper_link_generic(struct e1000_hw *hw)
++s32 e1000e_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ bool link;
+
-+ DEBUGFUNC("e1000_setup_copper_link_generic");
-+
+ if (hw->mac.autoneg) {
+ /*
+ * Setup autoneg and flow control advertisement and perform
+ * PHY will be set to 10H, 10F, 100H or 100F
+ * depending on user settings.
+ */
-+ DEBUGOUT("Forcing Speed and Duplex\n");
++ e_dbg("Forcing Speed and Duplex\n");
+ ret_val = hw->phy.ops.force_speed_duplex(hw);
+ if (ret_val) {
-+ DEBUGOUT("Error Forcing Speed and Duplex\n");
++ e_dbg("Error Forcing Speed and Duplex\n");
+ goto out;
+ }
+ }
+ * Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
-+ ret_val = e1000_phy_has_link_generic(hw,
++ ret_val = e1000e_phy_has_link_generic(hw,
+ COPPER_LINK_UP_LIMIT,
+ 10,
+ &link);
+ goto out;
+
+ if (link) {
-+ DEBUGOUT("Valid link established!!!\n");
-+ e1000_config_collision_dist_generic(hw);
-+ ret_val = e1000_config_fc_after_link_up_generic(hw);
++ e_dbg("Valid link established!!!\n");
++ e1000e_config_collision_dist(hw);
++ ret_val = e1000e_config_fc_after_link_up(hw);
+ } else {
-+ DEBUGOUT("Unable to establish link!!!\n");
++ e_dbg("Unable to establish link!!!\n");
+ }
+
+out:
+}
+
+/**
-+ * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
++ * e1000e_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Waits for link and returns
+ * successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
-+s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw)
++s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
-+ DEBUGFUNC("e1000_phy_force_speed_duplex_igp");
-+
-+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
++ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
-+ e1000_phy_force_speed_duplex_setup(hw, &phy_data);
++ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
-+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
++ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ * Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed and duplex are forced.
+ */
-+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
++ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
-+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
++ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
-+ DEBUGOUT1("IGP PSCR: %X\n", phy_data);
++ e_dbg("IGP PSCR: %X\n", phy_data);
+
-+ usec_delay(1);
++ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
-+ DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n");
++ e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
+
-+ ret_val = e1000_phy_has_link_generic(hw,
++ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+
-+ if (!link) {
-+ DEBUGOUT("Link taking longer than expected.\n");
-+ }
++ if (!link)
++ e_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
-+ ret_val = e1000_phy_has_link_generic(hw,
++ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+}
+
+/**
-+ * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
++ * e1000e_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * After reset, TX_CLK and CRS on Tx must be set. Return successful upon
+ * successful completion, else return corresponding error code.
+ **/
-+s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw)
++s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
-+ DEBUGFUNC("e1000_phy_force_speed_duplex_m88");
-+
+ /*
+ * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed and duplex are forced.
+ */
-+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
++ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
++ ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
-+ DEBUGOUT1("M88E1000 PSCR: %X\n", phy_data);
++ e_dbg("M88E1000 PSCR: %X\n", phy_data);
+
-+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
++ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
-+ e1000_phy_force_speed_duplex_setup(hw, &phy_data);
-+
-+ /* Reset the phy to commit changes. */
-+ phy_data |= MII_CR_RESET;
++ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
-+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
++ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
-+ usec_delay(1);
++ /* Reset the phy to commit changes. */
++ ret_val = e1000e_commit_phy(hw);
++ if (ret_val)
++ goto out;
+
+ if (phy->autoneg_wait_to_complete) {
-+ DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n");
++ e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
+
-+ ret_val = e1000_phy_has_link_generic(hw,
-+ PHY_FORCE_LIMIT,
-+ 100000,
-+ &link);
++ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
++ 100000, &link);
+ if (ret_val)
+ goto out;
+
+ * We didn't get link.
+ * Reset the DSP and cross our fingers.
+ */
-+ ret_val = phy->ops.write_reg(hw,
++ ret_val = e1e_wphy(hw,
+ M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
+ if (ret_val)
+ goto out;
-+ ret_val = e1000_phy_reset_dsp_generic(hw);
++ ret_val = e1000e_phy_reset_dsp(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Try once more */
-+ ret_val = e1000_phy_has_link_generic(hw,
-+ PHY_FORCE_LIMIT,
-+ 100000,
-+ &link);
++ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
++ 100000, &link);
+ if (ret_val)
+ goto out;
+ }
+
-+ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
++ ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ * the reset value of 2.5MHz.
+ */
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
-+ ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
++ ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ * In addition, we must re-enable CRS on Tx for both half and full
+ * duplex.
+ */
-+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
++ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
-+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
++ ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
++
++out:
++ return ret_val;
++}
++
++/**
++ * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
++ * @hw: pointer to the HW structure
++ *
++ * Forces the speed and duplex settings of the PHY.
++ * This is a function pointer entry point only called by
++ * PHY setup routines.
++ **/
++s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
++{
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val;
++ u16 data;
++ bool link;
++
++ if (phy->type != e1000_phy_ife) {
++ ret_val = e1000e_phy_force_speed_duplex_igp(hw);
++ goto out;
++ }
++
++ ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
++ if (ret_val)
++ goto out;
++
++ e1000e_phy_force_speed_duplex_setup(hw, &data);
++
++ ret_val = e1e_wphy(hw, PHY_CONTROL, data);
++ if (ret_val)
++ goto out;
++
++ /* Disable MDI-X support for 10/100 */
++ ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
++ if (ret_val)
++ goto out;
++
++ data &= ~IFE_PMC_AUTO_MDIX;
++ data &= ~IFE_PMC_FORCE_MDIX;
++
++ ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
++ if (ret_val)
++ goto out;
++
++ e_dbg("IFE PMC: %X\n", data);
++
++ udelay(1);
++
++ if (phy->autoneg_wait_to_complete) {
++ e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
++
++ ret_val = e1000e_phy_has_link_generic(hw,
++ PHY_FORCE_LIMIT,
++ 100000,
++ &link);
++ if (ret_val)
++ goto out;
++
++ if (!link)
++ e_dbg("Link taking longer than expected.\n");
++
++ /* Try once more */
++ ret_val = e1000e_phy_has_link_generic(hw,
++ PHY_FORCE_LIMIT,
++ 100000,
++ &link);
++ if (ret_val)
++ goto out;
++ }
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
++ * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ * @hw: pointer to the HW structure
+ * @phy_ctrl: pointer to current value of PHY_CONTROL
+ *
+ * caller must write to the PHY_CONTROL register for these settings to
+ * take affect.
+ **/
-+void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
++void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 ctrl;
+
-+ DEBUGFUNC("e1000_phy_force_speed_duplex_setup");
-+
+ /* Turn off flow control when forcing speed/duplex */
-+ hw->fc.type = e1000_fc_none;
++ hw->fc.current_mode = e1000_fc_none;
+
+ /* Force speed/duplex on the mac */
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
++ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~E1000_CTRL_SPD_SEL;
+
+ if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
+ ctrl &= ~E1000_CTRL_FD;
+ *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
-+ DEBUGOUT("Half Duplex\n");
++ e_dbg("Half Duplex\n");
+ } else {
+ ctrl |= E1000_CTRL_FD;
+ *phy_ctrl |= MII_CR_FULL_DUPLEX;
-+ DEBUGOUT("Full Duplex\n");
++ e_dbg("Full Duplex\n");
+ }
+
+ /* Forcing 10mb or 100mb? */
+ ctrl |= E1000_CTRL_SPD_100;
+ *phy_ctrl |= MII_CR_SPEED_100;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
-+ DEBUGOUT("Forcing 100mb\n");
++ e_dbg("Forcing 100mb\n");
+ } else {
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ *phy_ctrl |= MII_CR_SPEED_10;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
-+ DEBUGOUT("Forcing 10mb\n");
++ e_dbg("Forcing 10mb\n");
+ }
+
-+ e1000_config_collision_dist_generic(hw);
++ e1000e_config_collision_dist(hw);
+
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
++ ew32(CTRL, ctrl);
+}
+
+/**
-+ * e1000_set_d3_lplu_state_generic - Sets low power link up state for D3
++ * e1000e_set_d3_lplu_state - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
-+s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active)
++s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+ u16 data;
+
-+ DEBUGFUNC("e1000_set_d3_lplu_state_generic");
-+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
-+ ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
++ ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ goto out;
+
+ if (!active) {
+ data &= ~IGP02E1000_PM_D3_LPLU;
-+ ret_val = phy->ops.write_reg(hw,
-+ IGP02E1000_PHY_POWER_MGMT,
++ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
-+ ret_val = phy->ops.read_reg(hw,
++ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
++ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
-+ ret_val = phy->ops.read_reg(hw,
++ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
++ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= IGP02E1000_PM_D3_LPLU;
-+ ret_val = phy->ops.write_reg(hw,
-+ IGP02E1000_PHY_POWER_MGMT,
++ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
-+ ret_val = phy->ops.read_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
++ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-+ ret_val = phy->ops.write_reg(hw,
-+ IGP01E1000_PHY_PORT_CONFIG,
++ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ }
+
+}
+
+/**
-+ * e1000_check_downshift_generic - Checks whether a downshift in speed occurred
++ * e1000e_check_downshift - Checks whether a downshift in speed occurred
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * A downshift is detected by querying the PHY link health.
+ **/
-+s32 e1000_check_downshift_generic(struct e1000_hw *hw)
++s32 e1000e_check_downshift(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, offset, mask;
+
-+ DEBUGFUNC("e1000_check_downshift_generic");
-+
+ switch (phy->type) {
+ case e1000_phy_m88:
+ case e1000_phy_gg82563:
+ case e1000_phy_bm:
++ case e1000_phy_82578:
++ case e1000_phy_82577:
+ offset = M88E1000_PHY_SPEC_STATUS;
+ mask = M88E1000_PSSR_DOWNSHIFT;
+ break;
+ goto out;
+ }
+
-+ ret_val = phy->ops.read_reg(hw, offset, &phy_data);
++ ret_val = e1e_rphy(hw, offset, &phy_data);
+
+ if (!ret_val)
+ phy->speed_downgraded = (phy_data & mask) ? true : false;
+ s32 ret_val;
+ u16 data;
+
-+ DEBUGFUNC("e1000_check_polarity_m88");
-+
-+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data);
++ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
+ s32 ret_val;
+ u16 data, offset, mask;
+
-+ DEBUGFUNC("e1000_check_polarity_igp");
-+
+ /*
+ * Polarity is determined based on the speed of
+ * our connection.
+ */
-+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
++ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ mask = IGP01E1000_PSSR_POLARITY_REVERSED;
+ }
+
-+ ret_val = phy->ops.read_reg(hw, offset, &data);
++ ret_val = e1e_rphy(hw, offset, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & mask)
+}
+
+/**
-+ * e1000_wait_autoneg_generic - Wait for auto-neg completion
++ * e1000_check_polarity_ife - Check cable polarity for IFE PHY
+ * @hw: pointer to the HW structure
+ *
-+ * Waits for auto-negotiation to complete or for the auto-negotiation time
-+ * limit to expire, which ever happens first.
++ * Polarity is determined on the polarity reversal feature being enabled.
+ **/
-+s32 e1000_wait_autoneg_generic(struct e1000_hw *hw)
++s32 e1000_check_polarity_ife(struct e1000_hw *hw)
+{
-+ s32 ret_val = E1000_SUCCESS;
-+ u16 i, phy_status;
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val;
++ u16 phy_data, offset, mask;
+
-+ DEBUGFUNC("e1000_wait_autoneg_generic");
++ /*
++ * Polarity is determined based on the reversal feature being enabled.
++ */
++ if (phy->polarity_correction) {
++ offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
++ mask = IFE_PESC_POLARITY_REVERSED;
++ } else {
++ offset = IFE_PHY_SPECIAL_CONTROL;
++ mask = IFE_PSC_FORCE_POLARITY;
++ }
++
++ ret_val = e1e_rphy(hw, offset, &phy_data);
++
++ if (!ret_val)
++ phy->cable_polarity = (phy_data & mask)
++ ? e1000_rev_polarity_reversed
++ : e1000_rev_polarity_normal;
++
++ return ret_val;
++}
++
++/**
++ * e1000_wait_autoneg - Wait for auto-neg completion
++ * @hw: pointer to the HW structure
++ *
++ * Waits for auto-negotiation to complete or for the auto-negotiation time
++ * limit to expire, which ever happens first.
++ **/
++s32 e1000_wait_autoneg(struct e1000_hw *hw)
++{
++ s32 ret_val = E1000_SUCCESS;
++ u16 i, phy_status;
+
+ if (!(hw->phy.ops.read_reg))
+ return E1000_SUCCESS;
+
+ /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+ for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
-+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
++ ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
-+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
++ ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_AUTONEG_COMPLETE)
+ break;
-+ msec_delay(100);
++ msleep(100);
+ }
+
+ /*
+}
+
+/**
-+ * e1000_phy_has_link_generic - Polls PHY for link
++ * e1000e_phy_has_link_generic - Polls PHY for link
+ * @hw: pointer to the HW structure
+ * @iterations: number of times to poll for link
+ * @usec_interval: delay between polling attempts
+ *
+ * Polls the PHY status register for link, 'iterations' number of times.
+ **/
-+s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
++s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u16 i, phy_status;
+
-+ DEBUGFUNC("e1000_phy_has_link_generic");
-+
+ if (!(hw->phy.ops.read_reg))
+ return E1000_SUCCESS;
+
+ * twice due to the link bit being sticky. No harm doing
+ * it across the board.
+ */
-+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
++ ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
-+ break;
-+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
++ /*
++ * If the first read fails, another entity may have
++ * ownership of the resources, wait and try again to
++ * see if they have relinquished the resources yet.
++ */
++ udelay(usec_interval);
++ ret_val = e1e_rphy(hw, PHY_STATUS,
++ &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_LINK_STATUS)
+ break;
+ if (usec_interval >= 1000)
-+ msec_delay_irq(usec_interval/1000);
++ mdelay(usec_interval/1000);
+ else
-+ usec_delay(usec_interval);
++ udelay(usec_interval);
+ }
+
+ *success = (i < iterations) ? true : false;
+}
+
+/**
-+ * e1000_get_cable_length_m88 - Determine cable length for m88 PHY
++ * e1000e_get_cable_length_m88 - Determine cable length for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY specific status register to retrieve the cable length
+ * 3 110 - 140 meters
+ * 4 > 140 meters
+ **/
-+s32 e1000_get_cable_length_m88(struct e1000_hw *hw)
++s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, index;
+
-+ DEBUGFUNC("e1000_get_cable_length_m88");
-+
-+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
++ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
++ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE + 1) {
++ ret_val = E1000_ERR_PHY;
++ goto out;
++ }
++
+ phy->min_cable_length = e1000_m88_cable_length_table[index];
+ phy->max_cable_length = e1000_m88_cable_length_table[index+1];
+
+}
+
+/**
-+ * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY
++ * e1000e_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ * @hw: pointer to the HW structure
+ *
+ * The automatic gain control (agc) normalizes the amplitude of the
+ * into a lookup table to obtain the approximate cable length
+ * for each channel.
+ **/
-+s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw)
++s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D};
+
-+ DEBUGFUNC("e1000_get_cable_length_igp_2");
-+
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
-+ ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data);
++ ret_val = e1e_rphy(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ goto out;
+
+}
+
+/**
-+ * e1000_get_phy_info_m88 - Retrieve PHY information
++ * e1000e_get_phy_info_m88 - Retrieve PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Valid for only copper links. Read the PHY status register (sticky read)
+ * special status register to determine MDI/MDIx and current speed. If
+ * speed is 1000, then determine cable length, local and remote receiver.
+ **/
-+s32 e1000_get_phy_info_m88(struct e1000_hw *hw)
++s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
-+ DEBUGFUNC("e1000_get_phy_info_m88");
-+
+ if (hw->phy.media_type != e1000_media_type_copper) {
-+ DEBUGOUT("Phy info is only valid for copper media\n");
++ e_dbg("Phy info is only valid for copper media\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
-+ ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
++ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
-+ DEBUGOUT("Phy info is only valid if link is up\n");
++ e_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
-+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
++ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->polarity_correction = (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
-+ ? true
-+ : false;
++ ? true : false;
+
+ ret_val = e1000_check_polarity_m88(hw);
+ if (ret_val)
+ goto out;
+
-+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
++ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX) ? true : false;
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
-+ ret_val = hw->phy.ops.get_cable_length(hw);
++ ret_val = e1000_get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
-+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data);
++ ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+}
+
+/**
-+ * e1000_get_phy_info_igp - Retrieve igp PHY information
++ * e1000e_get_phy_info_igp - Retrieve igp PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
-+s32 e1000_get_phy_info_igp(struct e1000_hw *hw)
++s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
-+ DEBUGFUNC("e1000_get_phy_info_igp");
-+
-+ ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
++ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
-+ DEBUGOUT("Phy info is only valid if link is up\n");
++ e_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+ if (ret_val)
+ goto out;
+
-+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
++ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
-+ ret_val = hw->phy.ops.get_cable_length(hw);
++ ret_val = e1000_get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
-+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
++ ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+}
+
+/**
-+ * e1000_phy_sw_reset_generic - PHY software reset
++ * e1000e_phy_sw_reset - PHY software reset
+ * @hw: pointer to the HW structure
+ *
+ * Does a software reset of the PHY by reading the PHY control register and
+ * setting/write the control register reset bit to the PHY.
+ **/
-+s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw)
++s32 e1000e_phy_sw_reset(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u16 phy_ctrl;
+
-+ DEBUGFUNC("e1000_phy_sw_reset_generic");
-+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
-+ ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
++ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= MII_CR_RESET;
-+ ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
++ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
-+ usec_delay(1);
++ udelay(1);
+
+out:
+ return ret_val;
+}
+
+/**
-+ * e1000_phy_hw_reset_generic - PHY hardware reset
++ * e1000e_phy_hw_reset_generic - PHY hardware reset
+ * @hw: pointer to the HW structure
+ *
+ * Verify the reset block is not blocking us from resetting. Acquire
+ * bit in the PHY. Wait the appropriate delay time for the device to
+ * reset and release the semaphore (if necessary).
+ **/
-+s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw)
++s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+ u32 ctrl;
+
-+ DEBUGFUNC("e1000_phy_hw_reset_generic");
-+
-+ ret_val = phy->ops.check_reset_block(hw);
++ ret_val = e1000_check_reset_block(hw);
+ if (ret_val) {
+ ret_val = E1000_SUCCESS;
+ goto out;
+ if (ret_val)
+ goto out;
+
-+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_PHY_RST);
-+ E1000_WRITE_FLUSH(hw);
++ ctrl = er32(CTRL);
++ ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
++ e1e_flush();
+
-+ usec_delay(phy->reset_delay_us);
++ udelay(phy->reset_delay_us);
+
-+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-+ E1000_WRITE_FLUSH(hw);
++ ew32(CTRL, ctrl);
++ e1e_flush();
+
-+ usec_delay(150);
++ udelay(150);
+
+ phy->ops.release(hw);
+
+}
+
+/**
-+ * e1000_get_cfg_done_generic - Generic configuration done
++ * e1000e_get_cfg_done - Generic configuration done
+ * @hw: pointer to the HW structure
+ *
+ * Generic function to wait 10 milli-seconds for configuration to complete
+ * and return success.
+ **/
-+s32 e1000_get_cfg_done_generic(struct e1000_hw *hw)
++s32 e1000e_get_cfg_done(struct e1000_hw *hw)
+{
-+ DEBUGFUNC("e1000_get_cfg_done_generic");
-+
-+ msec_delay_irq(10);
++ mdelay(10);
+
+ return E1000_SUCCESS;
+}
+ **/
+s32 e1000_phy_init_script_igp3(struct e1000_hw *hw)
+{
-+ DEBUGOUT("Running IGP 3 PHY init script\n");
++ e_dbg("Running IGP 3 PHY init script\n");
+
+ /* PHY init IGP 3 */
+ /* Enable rise/fall, 10-mode work in class-A */
-+ hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018);
++ e1e_wphy(hw, 0x2F5B, 0x9018);
+ /* Remove all caps from Replica path filter */
-+ hw->phy.ops.write_reg(hw, 0x2F52, 0x0000);
++ e1e_wphy(hw, 0x2F52, 0x0000);
+ /* Bias trimming for ADC, AFE and Driver (Default) */
-+ hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24);
++ e1e_wphy(hw, 0x2FB1, 0x8B24);
+ /* Increase Hybrid poly bias */
-+ hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0);
++ e1e_wphy(hw, 0x2FB2, 0xF8F0);
+ /* Add 4% to Tx amplitude in Gig mode */
-+ hw->phy.ops.write_reg(hw, 0x2010, 0x10B0);
++ e1e_wphy(hw, 0x2010, 0x10B0);
+ /* Disable trimming (TTT) */
-+ hw->phy.ops.write_reg(hw, 0x2011, 0x0000);
++ e1e_wphy(hw, 0x2011, 0x0000);
+ /* Poly DC correction to 94.6% + 2% for all channels */
-+ hw->phy.ops.write_reg(hw, 0x20DD, 0x249A);
++ e1e_wphy(hw, 0x20DD, 0x249A);
+ /* ABS DC correction to 95.9% */
-+ hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3);
++ e1e_wphy(hw, 0x20DE, 0x00D3);
+ /* BG temp curve trim */
-+ hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE);
++ e1e_wphy(hw, 0x28B4, 0x04CE);
+ /* Increasing ADC OPAMP stage 1 currents to max */
-+ hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4);
++ e1e_wphy(hw, 0x2F70, 0x29E4);
+ /* Force 1000 ( required for enabling PHY regs configuration) */
-+ hw->phy.ops.write_reg(hw, 0x0000, 0x0140);
++ e1e_wphy(hw, 0x0000, 0x0140);
+ /* Set upd_freq to 6 */
-+ hw->phy.ops.write_reg(hw, 0x1F30, 0x1606);
++ e1e_wphy(hw, 0x1F30, 0x1606);
+ /* Disable NPDFE */
-+ hw->phy.ops.write_reg(hw, 0x1F31, 0xB814);
++ e1e_wphy(hw, 0x1F31, 0xB814);
+ /* Disable adaptive fixed FFE (Default) */
-+ hw->phy.ops.write_reg(hw, 0x1F35, 0x002A);
++ e1e_wphy(hw, 0x1F35, 0x002A);
+ /* Enable FFE hysteresis */
-+ hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067);
++ e1e_wphy(hw, 0x1F3E, 0x0067);
+ /* Fixed FFE for short cable lengths */
-+ hw->phy.ops.write_reg(hw, 0x1F54, 0x0065);
++ e1e_wphy(hw, 0x1F54, 0x0065);
+ /* Fixed FFE for medium cable lengths */
-+ hw->phy.ops.write_reg(hw, 0x1F55, 0x002A);
++ e1e_wphy(hw, 0x1F55, 0x002A);
+ /* Fixed FFE for long cable lengths */
-+ hw->phy.ops.write_reg(hw, 0x1F56, 0x002A);
++ e1e_wphy(hw, 0x1F56, 0x002A);
+ /* Enable Adaptive Clip Threshold */
-+ hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0);
++ e1e_wphy(hw, 0x1F72, 0x3FB0);
+ /* AHT reset limit to 1 */
-+ hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF);
++ e1e_wphy(hw, 0x1F76, 0xC0FF);
+ /* Set AHT master delay to 127 msec */
-+ hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC);
++ e1e_wphy(hw, 0x1F77, 0x1DEC);
+ /* Set scan bits for AHT */
-+ hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF);
++ e1e_wphy(hw, 0x1F78, 0xF9EF);
+ /* Set AHT Preset bits */
-+ hw->phy.ops.write_reg(hw, 0x1F79, 0x0210);
++ e1e_wphy(hw, 0x1F79, 0x0210);
+ /* Change integ_factor of channel A to 3 */
-+ hw->phy.ops.write_reg(hw, 0x1895, 0x0003);
++ e1e_wphy(hw, 0x1895, 0x0003);
+ /* Change prop_factor of channels BCD to 8 */
-+ hw->phy.ops.write_reg(hw, 0x1796, 0x0008);
++ e1e_wphy(hw, 0x1796, 0x0008);
+ /* Change cg_icount + enable integbp for channels BCD */
-+ hw->phy.ops.write_reg(hw, 0x1798, 0xD008);
++ e1e_wphy(hw, 0x1798, 0xD008);
+ /*
+ * Change cg_icount + enable integbp + change prop_factor_master
+ * to 8 for channel A
+ */
-+ hw->phy.ops.write_reg(hw, 0x1898, 0xD918);
++ e1e_wphy(hw, 0x1898, 0xD918);
+ /* Disable AHT in Slave mode on channel A */
-+ hw->phy.ops.write_reg(hw, 0x187A, 0x0800);
++ e1e_wphy(hw, 0x187A, 0x0800);
+ /*
+ * Enable LPLU and disable AN to 1000 in non-D0a states,
+ * Enable SPD+B2B
+ */
-+ hw->phy.ops.write_reg(hw, 0x0019, 0x008D);
++ e1e_wphy(hw, 0x0019, 0x008D);
+ /* Enable restart AN on an1000_dis change */
-+ hw->phy.ops.write_reg(hw, 0x001B, 0x2080);
++ e1e_wphy(hw, 0x001B, 0x2080);
+ /* Enable wh_fifo read clock in 10/100 modes */
-+ hw->phy.ops.write_reg(hw, 0x0014, 0x0045);
++ e1e_wphy(hw, 0x0014, 0x0045);
+ /* Restart AN, Speed selection is 1000 */
-+ hw->phy.ops.write_reg(hw, 0x0000, 0x1340);
++ e1e_wphy(hw, 0x0000, 0x1340);
+
+ return E1000_SUCCESS;
+}
+
+/**
-+ * e1000_get_phy_type_from_id - Get PHY type from id
++ * e1000e_get_phy_type_from_id - Get PHY type from id
+ * @phy_id: phy_id read from the phy
+ *
+ * Returns the phy type from the id.
+ **/
-+e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id)
++enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
+{
-+ e1000_phy_type phy_type = e1000_phy_unknown;
++ enum e1000_phy_type phy_type = e1000_phy_unknown;
+
+ switch (phy_id) {
+ case M88E1000_I_PHY_ID:
+ case BME1000_E_PHY_ID_R2:
+ phy_type = e1000_phy_bm;
+ break;
++ case I82578_E_PHY_ID:
++ phy_type = e1000_phy_82578;
++ break;
++ case I82577_E_PHY_ID:
++ phy_type = e1000_phy_82577;
++ break;
+ default:
+ phy_type = e1000_phy_unknown;
+ break;
+}
+
+/**
-+ * e1000_determine_phy_address - Determines PHY address.
++ * e1000e_determine_phy_address - Determines PHY address.
+ * @hw: pointer to the HW structure
+ *
+ * This uses a trial and error method to loop through possible PHY
+ * addresses. It tests each by reading the PHY ID registers and
+ * checking for a match.
+ **/
-+s32 e1000_determine_phy_address(struct e1000_hw* hw)
++s32 e1000e_determine_phy_address(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_PHY_TYPE;
-+ u32 phy_addr= 0;
++ u32 phy_addr = 0;
+ u32 i;
-+ e1000_phy_type phy_type = e1000_phy_unknown;
++ enum e1000_phy_type phy_type = e1000_phy_unknown;
++
++ hw->phy.id = phy_type;
+
+ for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
+ hw->phy.addr = phy_addr;
+ i = 0;
+
+ do {
-+ e1000_get_phy_id(hw);
-+ phy_type = e1000_get_phy_type_from_id(hw->phy.id);
++ e1000e_get_phy_id(hw);
++ phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
+
-+ /*
-+ * If phy_type is valid, break - we found our
-+ * PHY address
-+ */
++ /*
++ * If phy_type is valid, break - we found our
++ * PHY address
++ */
+ if (phy_type != e1000_phy_unknown) {
+ ret_val = E1000_SUCCESS;
+ goto out;
+ }
-+ msec_delay(1);
++ msleep(1);
+ i++;
+ } while (i < 10);
+ }
+}
+
+/**
-+ * e1000_write_phy_reg_bm - Write BM PHY register
++ * e1000e_write_phy_reg_bm - Write BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
-+s32 e1000_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
++s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+ u32 page_select = 0;
+ u32 page = offset >> IGP_PAGE_SHIFT;
+ u32 page_shift = 0;
+
-+ DEBUGFUNC("e1000_write_phy_reg_bm");
-+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
-+ ret_val = e1000_access_phy_wakeup_reg_bm(hw,
-+ offset, &data, false);
++ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
++ false);
+ goto out;
+ }
+
+ }
+
+ /* Page is shifted left, PHY expects (page x 32) */
-+ ret_val = e1000_write_phy_reg_mdic(hw, page_select,
++ ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
+ (page << page_shift));
+ if (ret_val) {
+ hw->phy.ops.release(hw);
+ }
+ }
+
-+ ret_val = e1000_write_phy_reg_mdic(hw,
-+ MAX_PHY_REG_ADDRESS & offset,
++ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+}
+
+/**
-+ * e1000_read_phy_reg_bm - Read BM PHY register
++ * e1000e_read_phy_reg_bm - Read BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
-+s32 e1000_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u32 page_select = 0;
+ u32 page = offset >> IGP_PAGE_SHIFT;
+ u32 page_shift = 0;
+
-+ DEBUGFUNC("e1000_read_phy_reg_bm");
-+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
-+ ret_val = e1000_access_phy_wakeup_reg_bm(hw,
-+ offset, data, true);
++ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
++ true);
+ goto out;
+ }
+
+ }
+
+ /* Page is shifted left, PHY expects (page x 32) */
-+ ret_val = e1000_write_phy_reg_mdic(hw, page_select,
++ ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
+ (page << page_shift));
+ if (ret_val) {
+ hw->phy.ops.release(hw);
+ }
+ }
+
-+ ret_val = e1000_read_phy_reg_mdic(hw,
-+ MAX_PHY_REG_ADDRESS & offset,
-+ data);
++ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
++ data);
+ hw->phy.ops.release(hw);
+
+out:
+}
+
+/**
-+ * e1000_read_phy_reg_bm2 - Read BM PHY register
++ * e1000e_read_phy_reg_bm2 - Read BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
-+s32 e1000_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
-+ DEBUGFUNC("e1000_write_phy_reg_bm2");
-+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+
+ /* Page is shifted left, PHY expects (page x 32) */
-+ ret_val = e1000_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
++ ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+ page);
+
+ if (ret_val) {
+ }
+ }
+
-+ ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
++ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+ hw->phy.ops.release(hw);
+
+}
+
+/**
-+ * e1000_write_phy_reg_bm2 - Write BM PHY register
++ * e1000e_write_phy_reg_bm2 - Write BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
-+s32 e1000_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
++s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+ u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
-+ DEBUGFUNC("e1000_write_phy_reg_bm2");
-+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ /* Page is shifted left, PHY expects (page x 32) */
-+ ret_val = e1000_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
++ ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+ page);
+
+ if (ret_val) {
+ }
+ }
+
-+ ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
++ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+ * 4) Read or write the data using the data opcode (0x12)
+ * 5) Restore 769_17.2 to its original value
+ **/
-+s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw,
-+ u32 offset, u16 *data, bool read)
++static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
++ u16 *data, bool read)
+{
+ s32 ret_val;
-+ u16 reg = ((u16)offset);
++ u16 reg = BM_PHY_REG_NUM(offset);
+ u16 phy_reg = 0;
+ u8 phy_acquired = 1;
+
-+ DEBUGFUNC("e1000_read_phy_wakeup_reg_bm");
++ /* Gig must be disabled for MDIO accesses to page 800 */
++ if ((hw->mac.type == e1000_pchlan) &&
++ (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
++ e_dbg("Attempting to access page 800 while gig enabled.\n");
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
-+ DEBUGOUT("Could not acquire PHY\n");
++ e_dbg("Could not acquire PHY\n");
+ phy_acquired = 0;
+ goto out;
+ }
+ hw->phy.addr = 1;
+
+ /* Set page 769 */
-+ e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
++ e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+
-+ ret_val = e1000_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
++ ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
+ if (ret_val) {
-+ DEBUGOUT("Could not read PHY page 769\n");
++ e_dbg("Could not read PHY page 769\n");
+ goto out;
+ }
+
+ /* First clear bit 4 to avoid a power state change */
+ phy_reg &= ~(BM_WUC_HOST_WU_BIT);
-+ ret_val = e1000_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
++ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+ if (ret_val) {
-+ DEBUGOUT("Could not clear PHY page 769 bit 4\n");
++ e_dbg("Could not clear PHY page 769 bit 4\n");
+ goto out;
+ }
+
+ /* Write bit 2 = 1, and clear bit 4 to 769_17 */
-+ ret_val = e1000_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
++ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
+ phy_reg | BM_WUC_ENABLE_BIT);
+ if (ret_val) {
-+ DEBUGOUT("Could not write PHY page 769 bit 2\n");
++ e_dbg("Could not write PHY page 769 bit 2\n");
+ goto out;
+ }
+
+ /* Select page 800 */
-+ ret_val = e1000_write_phy_reg_mdic(hw,
++ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (BM_WUC_PAGE << IGP_PAGE_SHIFT));
+
+ /* Write the page 800 offset value using opcode 0x11 */
-+ ret_val = e1000_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
++ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
+ if (ret_val) {
-+ DEBUGOUT("Could not write address opcode to page 800\n");
++ e_dbg("Could not write address opcode to page 800\n");
+ goto out;
+ }
+
+ if (read) {
+ /* Read the page 800 value using opcode 0x12 */
-+ ret_val = e1000_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
-+ data);
++ ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
++ data);
+ } else {
-+ /* Read the page 800 value using opcode 0x12 */
-+ ret_val = e1000_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
-+ *data);
++ /* Write the page 800 value using opcode 0x12 */
++ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
++ *data);
+ }
+
+ if (ret_val) {
-+ DEBUGOUT("Could not read data value from page 800\n");
++ e_dbg("Could not access data value from page 800\n");
+ goto out;
+ }
+
+ * Restore 769_17.2 to its original value
+ * Set page 769
+ */
-+ e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
++ e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+
+ /* Clear 769_17.2 */
-+ ret_val = e1000_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
++ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+ if (ret_val) {
-+ DEBUGOUT("Could not clear PHY page 769 bit 2\n");
++ e_dbg("Could not clear PHY page 769 bit 2\n");
+ goto out;
+ }
+
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
-+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
++ e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
-+ hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
++ e1e_wphy(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
-+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
++ e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
-+ hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
-+ msec_delay(1);
++ e1e_wphy(hw, PHY_CONTROL, mii_reg);
++ msleep(1);
+}
-diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_phy.h linux-2.6.22-10/drivers/net/e1000e/e1000_phy.h
---- linux-2.6.22-0/drivers/net/e1000e/e1000_phy.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_phy.h 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,190 @@
-+/*******************************************************************************
+
-+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
++{
++ s32 ret_val = E1000_SUCCESS;
++ u16 data = 0;
+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms and conditions of the GNU General Public License,
-+ version 2, as published by the Free Software Foundation.
++ ret_val = hw->phy.ops.acquire(hw);
++ if (ret_val)
++ return ret_val;
+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ more details.
++ /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
++ hw->phy.addr = 1;
++ ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
++ (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
++ if (ret_val) {
++ hw->phy.ops.release(hw);
++ return ret_val;
++ }
++ ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
++ (0x2180 | (slow << 10)));
+
-+ You should have received a copy of the GNU General Public License along with
-+ this program; if not, write to the Free Software Foundation, Inc.,
-+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
++ /* dummy read when reverting to fast mode - throw away result */
++ if (!slow)
++ e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
+
-+ The full GNU General Public License is included in this distribution in
-+ the file called "COPYING".
++ hw->phy.ops.release(hw);
+
-+ Contact Information:
-+ Linux NICS <linux.nics@intel.com>
-+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
++ return ret_val;
++}
+
-+*******************************************************************************/
++/**
++ * e1000_read_phy_reg_hv - Read HV PHY register
++ * @hw: pointer to the HW structure
++ * @offset: register offset to be read
++ * @data: pointer to the read data
++ *
++ * Acquires semaphore, if necessary, then reads the PHY register at offset
++ * and storing the retrieved information in data. Release any acquired
++ * semaphore before exiting.
++ **/
++s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
++{
++ s32 ret_val;
++ u16 page = BM_PHY_REG_PAGE(offset);
++ u16 reg = BM_PHY_REG_NUM(offset);
++ bool in_slow_mode = false;
++
++ /* Workaround failure in MDIO access while cable is disconnected */
++ if ((hw->phy.type == e1000_phy_82577) &&
++ !(er32(STATUS) & E1000_STATUS_LU)) {
++ ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
++ if (ret_val)
++ goto out;
+
-+#ifndef _E1000_PHY_H_
-+#define _E1000_PHY_H_
++ in_slow_mode = true;
++ }
+
-+typedef enum {
-+ e1000_ms_hw_default = 0,
-+ e1000_ms_force_master,
-+ e1000_ms_force_slave,
-+ e1000_ms_auto
-+} e1000_ms_type;
++ /* Page 800 works differently than the rest so it has its own func */
++ if (page == BM_WUC_PAGE) {
++ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
++ data, true);
++ goto out;
++ }
+
-+typedef enum {
-+ e1000_smart_speed_default = 0,
-+ e1000_smart_speed_on,
-+ e1000_smart_speed_off
-+} e1000_smart_speed;
++ if (page > 0 && page < HV_INTC_FC_PAGE_START) {
++ ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
++ data, true);
++ goto out;
++ }
+
-+void e1000_init_phy_ops_generic(struct e1000_hw *hw);
-+s32 e1000_check_downshift_generic(struct e1000_hw *hw);
-+s32 e1000_check_polarity_m88(struct e1000_hw *hw);
-+s32 e1000_check_polarity_igp(struct e1000_hw *hw);
-+s32 e1000_check_reset_block_generic(struct e1000_hw *hw);
-+s32 e1000_copper_link_autoneg(struct e1000_hw *hw);
-+s32 e1000_copper_link_setup_igp(struct e1000_hw *hw);
-+s32 e1000_copper_link_setup_m88(struct e1000_hw *hw);
-+s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw);
-+s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw);
-+s32 e1000_get_cable_length_m88(struct e1000_hw *hw);
-+s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw);
-+s32 e1000_get_cfg_done_generic(struct e1000_hw *hw);
-+s32 e1000_get_phy_id(struct e1000_hw *hw);
-+s32 e1000_get_phy_info_igp(struct e1000_hw *hw);
-+s32 e1000_get_phy_info_m88(struct e1000_hw *hw);
-+s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw);
-+void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
-+s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw);
-+s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw);
-+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
-+s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data);
-+s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
-+s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
-+s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active);
-+s32 e1000_setup_copper_link_generic(struct e1000_hw *hw);
-+s32 e1000_wait_autoneg_generic(struct e1000_hw *hw);
-+s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data);
-+s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
-+s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
-+s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
-+s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
-+ u32 usec_interval, bool *success);
-+s32 e1000_phy_init_script_igp3(struct e1000_hw *hw);
-+e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id);
-+s32 e1000_determine_phy_address(struct e1000_hw* hw);
-+s32 e1000_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
-+s32 e1000_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
-+s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data,
-+ bool read);
-+s32 e1000_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
-+s32 e1000_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
-+void e1000_power_up_phy_copper(struct e1000_hw *hw);
-+void e1000_power_down_phy_copper(struct e1000_hw *hw);
-+s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
-+s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
++ ret_val = hw->phy.ops.acquire(hw);
++ if (ret_val)
++ goto out;
+
-+#define E1000_MAX_PHY_ADDR 4
++ hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
-+/* IGP01E1000 Specific Registers */
-+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
-+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
-+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
-+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
-+#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO */
-+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality */
-+#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
-+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
-+#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */
-+#define IGP_PAGE_SHIFT 5
-+#define PHY_REG_MASK 0x1F
++ if (page == HV_INTC_FC_PAGE_START)
++ page = 0;
+
-+#define BM_WUC_PAGE 800
-+#define BM_WUC_ADDRESS_OPCODE 0x11
-+#define BM_WUC_DATA_OPCODE 0x12
-+#define BM_WUC_ENABLE_PAGE 769
-+#define BM_WUC_ENABLE_REG 17
-+#define BM_WUC_ENABLE_BIT (1 << 2)
-+#define BM_WUC_HOST_WU_BIT (1 << 4)
++ if (reg > MAX_PHY_MULTI_PAGE_REG) {
++ if ((hw->phy.type != e1000_phy_82578) ||
++ ((reg != I82578_ADDR_REG) &&
++ (reg != I82578_ADDR_REG + 1))) {
++ u32 phy_addr = hw->phy.addr;
+
-+/* BM PHY Copper Specific Control 1 */
-+#define BM_CS_CTRL1 16
-+#define BM_CS_CTRL1_ENERGY_DETECT 0x0300 /* Enable Energy Detect */
++ hw->phy.addr = 1;
+
-+/* BM PHY Copper Specific States */
-+#define BM_CS_STATUS 17
-+#define BM_CS_STATUS_ENERGY_DETECT 0x0010 /* Energy Detect Status */
++ /* Page is shifted left, PHY expects (page x 32) */
++ ret_val = e1000e_write_phy_reg_mdic(hw,
++ IGP01E1000_PHY_PAGE_SELECT,
++ (page << IGP_PAGE_SHIFT));
++ if (ret_val) {
++ hw->phy.ops.release(hw);
++ goto out;
++ }
++ hw->phy.addr = phy_addr;
++ }
++ }
+
-+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
-+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
++ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
++ data);
++ hw->phy.ops.release(hw);
+
-+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
-+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
++out:
++ /* Revert to MDIO fast mode, if applicable */
++ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
++ ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+
-+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
++ return ret_val;
++}
+
-+/* Enable flexible speed on link-up */
-+#define IGP01E1000_GMII_FLEX_SPD 0x0010
-+#define IGP01E1000_GMII_SPD 0x0020 /* Enable SPD */
++/**
++ * e1000_write_phy_reg_hv - Write HV PHY register
++ * @hw: pointer to the HW structure
++ * @offset: register offset to write to
++ * @data: data to write at register offset
++ *
++ * Acquires semaphore, if necessary, then writes the data to PHY register
++ * at the offset. Release any acquired semaphores before exiting.
++ **/
++s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
++{
++ s32 ret_val;
++ u16 page = BM_PHY_REG_PAGE(offset);
++ u16 reg = BM_PHY_REG_NUM(offset);
++ bool in_slow_mode = false;
++
++ /* Workaround failure in MDIO access while cable is disconnected */
++ if ((hw->phy.type == e1000_phy_82577) &&
++ !(er32(STATUS) & E1000_STATUS_LU)) {
++ ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
++ if (ret_val)
++ goto out;
+
-+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
-+#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
-+#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
++ in_slow_mode = true;
++ }
+
-+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
++ /* Page 800 works differently than the rest so it has its own func */
++ if (page == BM_WUC_PAGE) {
++ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
++ &data, false);
++ goto out;
++ }
+
-+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
-+#define IGP01E1000_PSSR_MDIX 0x0008
-+#define IGP01E1000_PSSR_SPEED_MASK 0xC000
-+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
++ if (page > 0 && page < HV_INTC_FC_PAGE_START) {
++ ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
++ &data, false);
++ goto out;
++ }
+
-+#define IGP02E1000_PHY_CHANNEL_NUM 4
-+#define IGP02E1000_PHY_AGC_A 0x11B1
-+#define IGP02E1000_PHY_AGC_B 0x12B1
-+#define IGP02E1000_PHY_AGC_C 0x14B1
-+#define IGP02E1000_PHY_AGC_D 0x18B1
++ ret_val = hw->phy.ops.acquire(hw);
++ if (ret_val)
++ goto out;
+
-+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
-+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
-+#define IGP02E1000_AGC_RANGE 15
++ hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
-+#define IGP03E1000_PHY_MISC_CTRL 0x1B
-+#define IGP03E1000_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Manually Set Duplex */
++ if (page == HV_INTC_FC_PAGE_START)
++ page = 0;
+
-+#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
++ /*
++ * Workaround MDIO accesses being disabled after entering IEEE Power
++ * Down (whenever bit 11 of the PHY Control register is set)
++ */
++ if ((hw->phy.type == e1000_phy_82578) &&
++ (hw->phy.revision >= 1) &&
++ (hw->phy.addr == 2) &&
++ ((MAX_PHY_REG_ADDRESS & reg) == 0) &&
++ (data & (1 << 11))) {
++ u16 data2 = 0x7EFF;
++ hw->phy.ops.release(hw);
++ ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
++ &data2, false);
++ if (ret_val)
++ goto out;
+
-+#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000
-+#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16
-+#define E1000_KMRNCTRLSTA_REN 0x00200000
-+#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
-+#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
++ ret_val = hw->phy.ops.acquire(hw);
++ if (ret_val)
++ goto out;
++ }
+
-+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
-+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
-+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */
-+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */
++ if (reg > MAX_PHY_MULTI_PAGE_REG) {
++ if ((hw->phy.type != e1000_phy_82578) ||
++ ((reg != I82578_ADDR_REG) &&
++ (reg != I82578_ADDR_REG + 1))) {
++ u32 phy_addr = hw->phy.addr;
+
-+/* IFE PHY Extended Status Control */
-+#define IFE_PESC_POLARITY_REVERSED 0x0100
++ hw->phy.addr = 1;
+
-+/* IFE PHY Special Control */
-+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010
-+#define IFE_PSC_FORCE_POLARITY 0x0020
-+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100
++ /* Page is shifted left, PHY expects (page x 32) */
++ ret_val = e1000e_write_phy_reg_mdic(hw,
++ IGP01E1000_PHY_PAGE_SELECT,
++ (page << IGP_PAGE_SHIFT));
++ if (ret_val) {
++ hw->phy.ops.release(hw);
++ goto out;
++ }
++ hw->phy.addr = phy_addr;
++ }
++ }
+
-+/* IFE PHY Special Control and LED Control */
-+#define IFE_PSCL_PROBE_MODE 0x0020
-+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
-+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
++ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
++ data);
++ hw->phy.ops.release(hw);
+
-+/* IFE PHY MDIX Control */
-+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
-+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */
-+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto MDI/MDI-X, 0=disable */
++out:
++ /* Revert to MDIO fast mode, if applicable */
++ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
++ ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+
-+#endif
-diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_regs.h linux-2.6.22-10/drivers/net/e1000e/e1000_regs.h
---- linux-2.6.22-0/drivers/net/e1000e/e1000_regs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/e1000_regs.h 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,310 @@
-+/*******************************************************************************
++ return ret_val;
++}
+
-+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++/**
++ * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
++ * @page: page to be accessed
++ **/
++static u32 e1000_get_phy_addr_for_hv_page(u32 page)
++{
++ u32 phy_addr = 2;
+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms and conditions of the GNU General Public License,
-+ version 2, as published by the Free Software Foundation.
++ if (page >= HV_INTC_FC_PAGE_START)
++ phy_addr = 1;
+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ return phy_addr;
++}
++
++/**
++ * e1000_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers
++ * @hw: pointer to the HW structure
++ * @offset: register offset to be read or written
++ * @data: pointer to the data to be read or written
++ * @read: determines if operation is read or written
++ *
++ * Acquires semaphore, if necessary, then reads the PHY register at offset
++ * and storing the retreived information in data. Release any acquired
++ * semaphores before exiting. Note that the procedure to read these regs
++ * uses the address port and data port to read/write.
++ **/
++static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
++ u16 *data, bool read)
++{
++ s32 ret_val;
++ u32 addr_reg = 0;
++ u32 data_reg = 0;
++ u8 phy_acquired = 1;
++
++ /* This takes care of the difference with desktop vs mobile phy */
++ addr_reg = (hw->phy.type == e1000_phy_82578) ?
++ I82578_ADDR_REG : I82577_ADDR_REG;
++ data_reg = addr_reg + 1;
++
++ ret_val = hw->phy.ops.acquire(hw);
++ if (ret_val) {
++ e_dbg("Could not acquire PHY\n");
++ phy_acquired = 0;
++ goto out;
++ }
++
++ /* All operations in this function are phy address 2 */
++ hw->phy.addr = 2;
++
++ /* masking with 0x3F to remove the page from offset */
++ ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
++ if (ret_val) {
++ e_dbg("Could not write PHY the HV address register\n");
++ goto out;
++ }
++
++ /* Read or write the data value next */
++ if (read)
++ ret_val = e1000e_read_phy_reg_mdic(hw, data_reg, data);
++ else
++ ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
++
++ if (ret_val) {
++ e_dbg("Could not read data value from HV data register\n");
++ goto out;
++ }
++
++out:
++ if (phy_acquired == 1)
++ hw->phy.ops.release(hw);
++ return ret_val;
++}
++
++/**
++ * e1000_link_stall_workaround_hv - Si workaround
++ * @hw: pointer to the HW structure
++ *
++ * This function works around a Si bug where the link partner can get
++ * a link up indication before the PHY does. If small packets are sent
++ * by the link partner they can be placed in the packet buffer without
++ * being properly accounted for by the PHY and will stall preventing
++ * further packets from being received. The workaround is to clear the
++ * packet buffer after the PHY detects link up.
++ **/
++s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
++{
++ s32 ret_val = E1000_SUCCESS;
++ u16 data;
++
++ if (hw->phy.type != e1000_phy_82578)
++ goto out;
++
++ /* Do not apply workaround if in PHY loopback bit 14 set */
++ e1e_rphy(hw, PHY_CONTROL, &data);
++ if (data & PHY_CONTROL_LB)
++ goto out;
++
++ /* check if link is up and at 1Gbps */
++ ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
++ if (ret_val)
++ goto out;
++
++ data &= BM_CS_STATUS_LINK_UP |
++ BM_CS_STATUS_RESOLVED |
++ BM_CS_STATUS_SPEED_MASK;
++
++ if (data != (BM_CS_STATUS_LINK_UP |
++ BM_CS_STATUS_RESOLVED |
++ BM_CS_STATUS_SPEED_1000))
++ goto out;
++
++ msleep(200);
++
++ /* flush the packets in the fifo buffer */
++ ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL,
++ HV_MUX_DATA_CTRL_GEN_TO_MAC |
++ HV_MUX_DATA_CTRL_FORCE_SPEED);
++ if (ret_val)
++ goto out;
++
++ ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL,
++ HV_MUX_DATA_CTRL_GEN_TO_MAC);
++
++out:
++ return ret_val;
++}
++
++/**
++ * e1000_check_polarity_82577 - Checks the polarity.
++ * @hw: pointer to the HW structure
++ *
++ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
++ *
++ * Polarity is determined based on the PHY specific status register.
++ **/
++s32 e1000_check_polarity_82577(struct e1000_hw *hw)
++{
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val;
++ u16 data;
++
++ ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
++
++ if (!ret_val)
++ phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
++ ? e1000_rev_polarity_reversed
++ : e1000_rev_polarity_normal;
++
++ return ret_val;
++}
++
++/**
++ * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
++ * @hw: pointer to the HW structure
++ *
++ * Calls the PHY setup function to force speed and duplex. Clears the
++ * auto-crossover to force MDI manually. Waits for link and returns
++ * successful if link up is successful, else -E1000_ERR_PHY (-2).
++ **/
++s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
++{
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val;
++ u16 phy_data;
++ bool link;
++
++ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
++ if (ret_val)
++ goto out;
++
++ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
++
++ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
++ if (ret_val)
++ goto out;
++
++ /*
++ * Clear Auto-Crossover to force MDI manually. 82577 requires MDI
++ * forced whenever speed and duplex are forced.
++ */
++ ret_val = e1e_rphy(hw, I82577_PHY_CTRL_2, &phy_data);
++ if (ret_val)
++ goto out;
++
++ phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX;
++ phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX;
++
++ ret_val = e1e_wphy(hw, I82577_PHY_CTRL_2, phy_data);
++ if (ret_val)
++ goto out;
++
++ e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data);
++
++ udelay(1);
++
++ if (phy->autoneg_wait_to_complete) {
++ e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
++
++ ret_val = e1000e_phy_has_link_generic(hw,
++ PHY_FORCE_LIMIT,
++ 100000,
++ &link);
++ if (ret_val)
++ goto out;
++
++ if (!link)
++ e_dbg("Link taking longer than expected.\n");
++
++ /* Try once more */
++ ret_val = e1000e_phy_has_link_generic(hw,
++ PHY_FORCE_LIMIT,
++ 100000,
++ &link);
++ if (ret_val)
++ goto out;
++ }
++
++out:
++ return ret_val;
++}
++
++/**
++ * e1000_get_phy_info_82577 - Retrieve I82577 PHY information
++ * @hw: pointer to the HW structure
++ *
++ * Read PHY status to determine if link is up. If link is up, then
++ * set/determine 10base-T extended distance and polarity correction. Read
++ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
++ * determine on the cable length, local and remote receiver.
++ **/
++s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
++{
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val;
++ u16 data;
++ bool link;
++
++ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
++ if (ret_val)
++ goto out;
++
++ if (!link) {
++ e_dbg("Phy info is only valid if link is up\n");
++ ret_val = -E1000_ERR_CONFIG;
++ goto out;
++ }
++
++ phy->polarity_correction = true;
++
++ ret_val = e1000_check_polarity_82577(hw);
++ if (ret_val)
++ goto out;
++
++ ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
++ if (ret_val)
++ goto out;
++
++ phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
++
++ if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
++ I82577_PHY_STATUS2_SPEED_1000MBPS) {
++ ret_val = e1000_get_cable_length(hw);
++ if (ret_val)
++ goto out;
++
++ ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
++ if (ret_val)
++ goto out;
++
++ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
++ ? e1000_1000t_rx_status_ok
++ : e1000_1000t_rx_status_not_ok;
++
++ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
++ ? e1000_1000t_rx_status_ok
++ : e1000_1000t_rx_status_not_ok;
++ } else {
++ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
++ phy->local_rx = e1000_1000t_rx_status_undefined;
++ phy->remote_rx = e1000_1000t_rx_status_undefined;
++ }
++
++out:
++ return ret_val;
++}
++
++/**
++ * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY
++ * @hw: pointer to the HW structure
++ *
++ * Reads the diagnostic status register and verifies result is valid before
++ * placing it in the phy_cable_length field.
++ **/
++s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
++{
++ struct e1000_phy_info *phy = &hw->phy;
++ s32 ret_val;
++ u16 phy_data, length;
++
++ ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
++ if (ret_val)
++ goto out;
++
++ length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
++ I82577_DSTATUS_CABLE_LENGTH_SHIFT;
++
++ if (length == E1000_CABLE_LENGTH_UNDEFINED)
++ ret_val = E1000_ERR_PHY;
++
++ phy->cable_length = length;
++
++out:
++ return ret_val;
++}
+diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_phy.h linux-2.6.22-10/drivers/net/e1000e/e1000_phy.h
+--- linux-2.6.22-0/drivers/net/e1000e/e1000_phy.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_phy.h 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,238 @@
++/*******************************************************************************
++
++ Intel PRO/1000 Linux driver
++ Copyright(c) 1999 - 2009 Intel Corporation.
++
++ This program is free software; you can redistribute it and/or modify it
++ under the terms and conditions of the GNU General Public License,
++ version 2, as published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+
+*******************************************************************************/
+
-+#ifndef _E1000_REGS_H_
-+#define _E1000_REGS_H_
++#ifndef _E1000_PHY_H_
++#define _E1000_PHY_H_
+
-+#define E1000_CTRL 0x00000 /* Device Control - RW */
-+#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
-+#define E1000_STATUS 0x00008 /* Device Status - RO */
-+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
-+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
-+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
-+#define E1000_FLA 0x0001C /* Flash Access - RW */
-+#define E1000_MDIC 0x00020 /* MDI Control - RW */
-+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
-+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
-+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
-+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */
-+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
-+#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
-+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
-+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
-+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
-+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
-+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
-+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
-+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
-+#define E1000_IVAR 0x000E4 /* Interrupt Vector Allocation Register - RW */
-+#define E1000_RCTL 0x00100 /* Rx Control - RW */
-+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
-+#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */
-+#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */
-+#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
-+#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
-+#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
-+#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
-+#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
-+#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
-+#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
-+#define E1000_TCTL 0x00400 /* Tx Control - RW */
-+#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */
-+#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */
-+#define E1000_TBT 0x00448 /* Tx Burst Timer - RW */
-+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
-+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
++void e1000_init_phy_ops_generic(struct e1000_hw *hw);
++s32 e1000e_check_downshift(struct e1000_hw *hw);
++s32 e1000_check_polarity_m88(struct e1000_hw *hw);
++s32 e1000_check_polarity_igp(struct e1000_hw *hw);
++s32 e1000_check_polarity_ife(struct e1000_hw *hw);
++s32 e1000e_check_reset_block_generic(struct e1000_hw *hw);
++s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
++s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
++s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
++s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
++s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
++s32 e1000e_get_cable_length_m88(struct e1000_hw *hw);
++s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
++s32 e1000e_get_cfg_done(struct e1000_hw *hw);
++s32 e1000e_get_phy_id(struct e1000_hw *hw);
++s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
++s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
++s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
++void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
++s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
++s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
++s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
++s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
++s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
++s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
++s32 e1000e_setup_copper_link(struct e1000_hw *hw);
++s32 e1000_wait_autoneg(struct e1000_hw *hw);
++s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
++s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
++s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
++s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
++s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
++ u32 usec_interval, bool *success);
++s32 e1000_phy_init_script_igp3(struct e1000_hw *hw);
++enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
++s32 e1000e_determine_phy_address(struct e1000_hw *hw);
++s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
++s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
++s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
++s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
++void e1000_power_up_phy_copper(struct e1000_hw *hw);
++void e1000_power_down_phy_copper(struct e1000_hw *hw);
++s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
++s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
++s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
++s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
++s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
++s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
++s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
++s32 e1000_check_polarity_82577(struct e1000_hw *hw);
++s32 e1000_get_phy_info_82577(struct e1000_hw *hw);
++s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
++s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
++
++#define E1000_MAX_PHY_ADDR 4
++
++/* IGP01E1000 Specific Registers */
++#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
++#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
++#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
++#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
++#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO */
++#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality */
++#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
++#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
++#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */
++#define IGP_PAGE_SHIFT 5
++#define PHY_REG_MASK 0x1F
++
++/* BM/HV Specific Registers */
++#define BM_PORT_CTRL_PAGE 769
++#define BM_PCIE_PAGE 770
++#define BM_WUC_PAGE 800
++#define BM_WUC_ADDRESS_OPCODE 0x11
++#define BM_WUC_DATA_OPCODE 0x12
++#define BM_WUC_ENABLE_PAGE BM_PORT_CTRL_PAGE
++#define BM_WUC_ENABLE_REG 17
++#define BM_WUC_ENABLE_BIT (1 << 2)
++#define BM_WUC_HOST_WU_BIT (1 << 4)
++
++#define PHY_UPPER_SHIFT 21
++#define BM_PHY_REG(page, reg) \
++ (((reg) & MAX_PHY_REG_ADDRESS) |\
++ (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\
++ (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)))
++#define BM_PHY_REG_PAGE(offset) \
++ ((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF))
++#define BM_PHY_REG_NUM(offset) \
++ ((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\
++ (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\
++ ~MAX_PHY_REG_ADDRESS)))
++
++#define HV_INTC_FC_PAGE_START 768
++#define I82578_ADDR_REG 29
++#define I82577_ADDR_REG 16
++#define I82577_CFG_REG 22
++#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15)
++#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
++#define I82577_CTRL_REG 23
++#define I82577_CTRL_DOWNSHIFT_MASK (7 << 10)
++
++/* 82577 specific PHY registers */
++#define I82577_PHY_CTRL_2 18
++#define I82577_PHY_LBK_CTRL 19
++#define I82577_PHY_STATUS_2 26
++#define I82577_PHY_DIAG_STATUS 31
++
++/* I82577 PHY Status 2 */
++#define I82577_PHY_STATUS2_REV_POLARITY 0x0400
++#define I82577_PHY_STATUS2_MDIX 0x0800
++#define I82577_PHY_STATUS2_SPEED_MASK 0x0300
++#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
++#define I82577_PHY_STATUS2_SPEED_100MBPS 0x0100
++
++/* I82577 PHY Control 2 */
++#define I82577_PHY_CTRL2_AUTO_MDIX 0x0400
++#define I82577_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
++
++/* I82577 PHY Diagnostics Status */
++#define I82577_DSTATUS_CABLE_LENGTH 0x03FC
++#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2
++
++/* BM PHY Copper Specific Control 1 */
++#define BM_CS_CTRL1 16
++#define BM_CS_CTRL1_ENERGY_DETECT 0x0300 /* Enable Energy Detect */
++
++/* BM PHY Copper Specific Status */
++#define BM_CS_STATUS 17
++#define BM_CS_STATUS_ENERGY_DETECT 0x0010 /* Energy Detect Status */
++#define BM_CS_STATUS_LINK_UP 0x0400
++#define BM_CS_STATUS_RESOLVED 0x0800
++#define BM_CS_STATUS_SPEED_MASK 0xC000
++#define BM_CS_STATUS_SPEED_1000 0x8000
++
++#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
++#define IGP01E1000_PHY_POLARITY_MASK 0x0078
++
++#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
++#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
++
++#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
++
++/* Enable flexible speed on link-up */
++#define IGP01E1000_GMII_FLEX_SPD 0x0010
++#define IGP01E1000_GMII_SPD 0x0020 /* Enable SPD */
++
++#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
++#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
++#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
++
++#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
++
++#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
++#define IGP01E1000_PSSR_MDIX 0x0800
++#define IGP01E1000_PSSR_SPEED_MASK 0xC000
++#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
++
++#define IGP02E1000_PHY_CHANNEL_NUM 4
++#define IGP02E1000_PHY_AGC_A 0x11B1
++#define IGP02E1000_PHY_AGC_B 0x12B1
++#define IGP02E1000_PHY_AGC_C 0x14B1
++#define IGP02E1000_PHY_AGC_D 0x18B1
++
++#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
++#define IGP02E1000_AGC_LENGTH_MASK 0x7F
++#define IGP02E1000_AGC_RANGE 15
++
++#define IGP03E1000_PHY_MISC_CTRL 0x1B
++#define IGP03E1000_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Manually Set Duplex */
++
++#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
++
++#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000
++#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16
++#define E1000_KMRNCTRLSTA_REN 0x00200000
++#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
++#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */
++#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */
++#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
++#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
++#define E1000_KMRNCTRLSTA_K1_ENABLE 0x140E
++#define E1000_KMRNCTRLSTA_K1_DISABLE 0x1400
++
++#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
++#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
++#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */
++#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */
++
++/* IFE PHY Extended Status Control */
++#define IFE_PESC_POLARITY_REVERSED 0x0100
++
++/* IFE PHY Special Control */
++#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010
++#define IFE_PSC_FORCE_POLARITY 0x0020
++#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100
++
++/* IFE PHY Special Control and LED Control */
++#define IFE_PSCL_PROBE_MODE 0x0020
++#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
++#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
++
++/* IFE PHY MDIX Control */
++#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
++#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */
++#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto MDI/MDI-X, 0=disable */
++
++#endif
+diff -Nurp linux-2.6.22-0/drivers/net/e1000e/e1000_regs.h linux-2.6.22-10/drivers/net/e1000e/e1000_regs.h
+--- linux-2.6.22-0/drivers/net/e1000e/e1000_regs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.22-10/drivers/net/e1000e/e1000_regs.h 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,338 @@
++/*******************************************************************************
++
++ Intel PRO/1000 Linux driver
++ Copyright(c) 1999 - 2009 Intel Corporation.
++
++ This program is free software; you can redistribute it and/or modify it
++ under the terms and conditions of the GNU General Public License,
++ version 2, as published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ more details.
++
++ You should have received a copy of the GNU General Public License along with
++ this program; if not, write to the Free Software Foundation, Inc.,
++ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
++
++ The full GNU General Public License is included in this distribution in
++ the file called "COPYING".
++
++ Contact Information:
++ Linux NICS <linux.nics@intel.com>
++ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
++ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
++
++*******************************************************************************/
++
++#ifndef _E1000_REGS_H_
++#define _E1000_REGS_H_
++
++#define E1000_CTRL 0x00000 /* Device Control - RW */
++#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
++#define E1000_STATUS 0x00008 /* Device Status - RO */
++#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
++#define E1000_EERD 0x00014 /* EEPROM Read - RW */
++#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
++#define E1000_FLA 0x0001C /* Flash Access - RW */
++#define E1000_MDIC 0x00020 /* MDI Control - RW */
++#define E1000_SCTL 0x00024 /* SerDes Control - RW */
++#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
++#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
++#define E1000_FEXT 0x0002C /* Future Extended - RW */
++#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */
++#define E1000_FCT 0x00030 /* Flow Control Type - RW */
++#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
++#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
++#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
++#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
++#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
++#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
++#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
++#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
++#define E1000_IVAR 0x000E4 /* Interrupt Vector Allocation Register - RW */
++#define E1000_SVCR 0x000F0
++#define E1000_SVT 0x000F4
++#define E1000_RCTL 0x00100 /* Rx Control - RW */
++#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
++#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */
++#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */
++#define E1000_PBA_ECC 0x01100 /* PBA ECC Register */
++#define E1000_TCTL 0x00400 /* Tx Control - RW */
++#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */
++#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */
++#define E1000_TBT 0x00448 /* Tx Burst Timer - RW */
++#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
++#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define E1000_WDSTP 0x01040 /* Watchdog Setup - RW */
+#define E1000_SWDSTS 0x01044 /* SW Device Status - RW */
+#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
-+#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_RDPUWD 0x025D4 /* DMA Rx Descriptor uC Data Write - RW */
+#define E1000_RDPURD 0x025D8 /* DMA Rx Descriptor uC Data Read - RW */
+#define E1000_RDPUCTL 0x025DC /* DMA Rx Descriptor uC Control - RW */
++#define E1000_RXCTL(_n) (0x0C014 + (0x40 * (_n)))
++#define E1000_RQDPC(_n) (0x0C030 + (0x40 * (_n)))
+#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */
+#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */
+/*
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
-+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : (0x0C000 + ((_n) * 0x40)))
-+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : (0x0C004 + ((_n) * 0x40)))
-+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : (0x0C008 + ((_n) * 0x40)))
-+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : (0x0C00C + ((_n) * 0x40)))
-+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : (0x0C010 + ((_n) * 0x40)))
-+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : (0x0C018 + ((_n) * 0x40)))
-+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : (0x0C028 + ((_n) * 0x40)))
-+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : (0x0E000 + ((_n) * 0x40)))
-+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : (0x0E004 + ((_n) * 0x40)))
-+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : (0x0E008 + ((_n) * 0x40)))
-+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : (0x0E010 + ((_n) * 0x40)))
-+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : (0x0E018 + ((_n) * 0x40)))
-+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : (0x0E028 + ((_n) * 0x40)))
-+#define E1000_TARC(_n) (0x03840 + (_n << 8))
++#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
++ (0x0C000 + ((_n) * 0x40)))
++#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
++ (0x0C004 + ((_n) * 0x40)))
++#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
++ (0x0C008 + ((_n) * 0x40)))
++#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
++ (0x0C00C + ((_n) * 0x40)))
++#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
++ (0x0C010 + ((_n) * 0x40)))
++#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
++ (0x0C018 + ((_n) * 0x40)))
++#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
++ (0x0C028 + ((_n) * 0x40)))
++#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
++ (0x0E000 + ((_n) * 0x40)))
++#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
++ (0x0E004 + ((_n) * 0x40)))
++#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
++ (0x0E008 + ((_n) * 0x40)))
++#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
++ (0x0E010 + ((_n) * 0x40)))
++#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
++ (0x0E018 + ((_n) * 0x40)))
++#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
++ (0x0E028 + ((_n) * 0x40)))
++#define E1000_TARC(_n) (0x03840 + (_n << 8))
+#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
+#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
-+#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : (0x0E038 + ((_n) * 0x40)))
-+#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : (0x0E03C + ((_n) * 0x40)))
++#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : \
++ (0x0E038 + ((_n) * 0x40)))
++#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : \
++ (0x0E03C + ((_n) * 0x40)))
+#define E1000_RSRPD 0x02C00 /* Rx Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC 0x03000 /* Tx DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
-+#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : (0x054E0 + ((_i - 16) * 8)))
-+#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : (0x054E4 + ((_i - 16) * 8)))
++#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
++ (0x054E0 + ((_i - 16) * 8)))
++#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
++ (0x054E4 + ((_i - 16) * 8)))
+#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
-+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
-+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
-+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
-+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
++#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */
++#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */
++#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */
++#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
-+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
-+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
++#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */
++#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
++/*
++ * The CRC offset register is undocumented because it is for future use and
++ * may change in the future.
++ */
++#define E1000_CRC_OFFSET 0x05F50 /* CRC Offset register */
+
+#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */
+#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
-+#define E1000_VMD_CTL 0x0581C /* VMDq Control - RW */
++#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
+#define E1000_VFQA0 0x0B000 /* VLAN Filter Queue Array 0 - RW Array */
+#define E1000_VFQA1 0x0B200 /* VLAN Filter Queue Array 1 - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
-+#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */
-+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
-+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
-+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
-+#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
-+#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
-+#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
-+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
-+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
-+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
-+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
-+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
-+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
-+#define E1000_SWSM 0x05B50 /* SW Semaphore */
-+#define E1000_FWSM 0x05B54 /* FW Semaphore */
-+#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */
-+#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */
-+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
-+#define E1000_HICR 0x08F00 /* Host Interface Control */
++#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */
++#define E1000_MDPHYA 0x0003C /* PHY address - RW */
++#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
++#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
++#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
++#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
++#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
++#define E1000_GCR 0x05B00 /* PCI-Ex Control */
++#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */
++#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
++#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
++#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
++#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
++#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
++#define E1000_SWSM 0x05B50 /* SW Semaphore */
++#define E1000_FWSM 0x05B54 /* FW Semaphore */
++#define E1000_SWSM2 0x05B58 /* Driver-only SW semaphore (not used by BOOT agents) */
++#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */
++#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */
++#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
++#define E1000_HICR 0x08F00 /* Host Interface Control */
++
++/* RSS registers */
++#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
++#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
++#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
++#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/
++#define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt Rx VLAN Priority - RW */
++#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) /* MSI-X Allocation Register
++ * (_i) - RW */
++#define E1000_MSIXTADD(_i) (0x0C000 + ((_i) * 0x10)) /* MSI-X Table entry addr
++ * low reg - RW */
++#define E1000_MSIXTUADD(_i) (0x0C004 + ((_i) * 0x10)) /* MSI-X Table entry addr
++ * upper reg - RW */
++#define E1000_MSIXTMSG(_i) (0x0C008 + ((_i) * 0x10)) /* MSI-X Table entry
++ * message reg - RW */
++#define E1000_MSIXVCTRL(_i) (0x0C00C + ((_i) * 0x10)) /* MSI-X Table entry
++ * vector ctrl reg - RW */
++#define E1000_MSIXPBA 0x0E000 /* MSI-X Pending bit array */
++#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */
++#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */
++#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
++#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
++#define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */
++#define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */
++
++#endif
+diff -Nurp linux-2.6.22-0/drivers/net/e1000e/ethtool.c linux-2.6.22-10/drivers/net/e1000e/ethtool.c
+--- linux-2.6.22-0/drivers/net/e1000e/ethtool.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.22-10/drivers/net/e1000e/ethtool.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,2033 @@
++/*******************************************************************************
++
++ Intel PRO/1000 Linux driver
++ Copyright(c) 1999 - 2009 Intel Corporation.
++
++ This program is free software; you can redistribute it and/or modify it
++ under the terms and conditions of the GNU General Public License,
++ version 2, as published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ more details.
++
++ You should have received a copy of the GNU General Public License along with
++ this program; if not, write to the Free Software Foundation, Inc.,
++ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
++
++ The full GNU General Public License is included in this distribution in
++ the file called "COPYING".
++
++ Contact Information:
++ Linux NICS <linux.nics@intel.com>
++ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
++ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
++
++*******************************************************************************/
++
++/* ethtool support for e1000 */
++
++#include <linux/netdevice.h>
++#ifdef SIOCETHTOOL
++#include <linux/ethtool.h>
++#include <linux/pci.h>
++#include <linux/delay.h>
++
++#include "e1000.h"
++#ifdef NETIF_F_HW_VLAN_TX
++#include <linux/if_vlan.h>
++#endif
++#ifdef ETHTOOL_OPS_COMPAT
++#include "kcompat_ethtool.c"
++#endif
++
++struct e1000_stats {
++ char stat_string[ETH_GSTRING_LEN];
++ int sizeof_stat;
++ int stat_offset;
++};
++
++#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
++ offsetof(struct e1000_adapter, m)
++static const struct e1000_stats e1000_gstrings_stats[] = {
++ { "rx_packets", E1000_STAT(stats.gprc) },
++ { "tx_packets", E1000_STAT(stats.gptc) },
++ { "rx_bytes", E1000_STAT(stats.gorc) },
++ { "tx_bytes", E1000_STAT(stats.gotc) },
++ { "rx_broadcast", E1000_STAT(stats.bprc) },
++ { "tx_broadcast", E1000_STAT(stats.bptc) },
++ { "rx_multicast", E1000_STAT(stats.mprc) },
++ { "tx_multicast", E1000_STAT(stats.mptc) },
++ { "rx_errors", E1000_STAT(net_stats.rx_errors) },
++ { "tx_errors", E1000_STAT(net_stats.tx_errors) },
++#ifndef CONFIG_E1000E_NAPI
++ { "rx_dropped_backlog", E1000_STAT(rx_dropped_backlog) },
++#endif
++ { "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
++ { "multicast", E1000_STAT(stats.mprc) },
++ { "collisions", E1000_STAT(stats.colc) },
++ { "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) },
++ { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
++ { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
++ { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
++ { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
++ { "rx_missed_errors", E1000_STAT(stats.mpc) },
++ { "tx_aborted_errors", E1000_STAT(stats.ecol) },
++ { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
++ { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
++ { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
++ { "tx_window_errors", E1000_STAT(stats.latecol) },
++ { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
++ { "tx_deferred_ok", E1000_STAT(stats.dc) },
++ { "tx_single_coll_ok", E1000_STAT(stats.scc) },
++ { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
++ { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
++ { "tx_restart_queue", E1000_STAT(restart_queue) },
++ { "rx_long_length_errors", E1000_STAT(stats.roc) },
++ { "rx_short_length_errors", E1000_STAT(stats.ruc) },
++ { "rx_align_errors", E1000_STAT(stats.algnerrc) },
++ { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
++ { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
++ { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
++ { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
++ { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
++ { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
++ { "rx_long_byte_count", E1000_STAT(stats.gorc) },
++ { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
++ { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
++ { "rx_header_split", E1000_STAT(rx_hdr_split) },
++ { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
++ { "tx_smbus", E1000_STAT(stats.mgptc) },
++ { "rx_smbus", E1000_STAT(stats.mgprc) },
++ { "dropped_smbus", E1000_STAT(stats.mgpdc) },
++ { "rx_dma_failed", E1000_STAT(rx_dma_failed) },
++ { "tx_dma_failed", E1000_STAT(tx_dma_failed) },
++};
++
++#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
++#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN)
++static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
++ "Register test (offline)", "Eeprom test (offline)",
++ "Interrupt test (offline)", "Loopback test (offline)",
++ "Link test (on/offline)"
++};
++#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
++
++static int e1000_get_settings(struct net_device *netdev,
++ struct ethtool_cmd *ecmd)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ struct e1000_hw *hw = &adapter->hw;
++ u32 status;
++
++ if (hw->phy.media_type == e1000_media_type_copper) {
++
++ ecmd->supported = (SUPPORTED_10baseT_Half |
++ SUPPORTED_10baseT_Full |
++ SUPPORTED_100baseT_Half |
++ SUPPORTED_100baseT_Full |
++ SUPPORTED_1000baseT_Full |
++ SUPPORTED_Autoneg |
++ SUPPORTED_TP);
++ if (hw->phy.type == e1000_phy_ife)
++ ecmd->supported &= ~SUPPORTED_1000baseT_Full;
++ ecmd->advertising = ADVERTISED_TP;
++
++ if (hw->mac.autoneg == 1) {
++ ecmd->advertising |= ADVERTISED_Autoneg;
++ /* the e1000 autoneg seems to match ethtool nicely */
++ ecmd->advertising |= hw->phy.autoneg_advertised;
++ }
++
++ ecmd->port = PORT_TP;
++ ecmd->phy_address = hw->phy.addr;
++ ecmd->transceiver = XCVR_INTERNAL;
++
++ } else {
++ ecmd->supported = (SUPPORTED_1000baseT_Full |
++ SUPPORTED_FIBRE |
++ SUPPORTED_Autoneg);
++
++ ecmd->advertising = (ADVERTISED_1000baseT_Full |
++ ADVERTISED_FIBRE |
++ ADVERTISED_Autoneg);
++
++ ecmd->port = PORT_FIBRE;
++ ecmd->transceiver = XCVR_EXTERNAL;
++ }
++
++ status = er32(STATUS);
++ if (status & E1000_STATUS_LU) {
++ if (status & E1000_STATUS_SPEED_1000)
++ ecmd->speed = 1000;
++ else if (status & E1000_STATUS_SPEED_100)
++ ecmd->speed = 100;
++ else
++ ecmd->speed = 10;
++
++ if (status & E1000_STATUS_FD)
++ ecmd->duplex = DUPLEX_FULL;
++ else
++ ecmd->duplex = DUPLEX_HALF;
++ } else {
++ ecmd->speed = -1;
++ ecmd->duplex = -1;
++ }
++
++ ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
++ hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
++ return 0;
++}
++
++static u32 e1000_get_link(struct net_device *netdev)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++
++ return e1000_has_link(adapter);
++}
++
++static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
++{
++ struct e1000_mac_info *mac = &adapter->hw.mac;
++
++ mac->autoneg = 0;
++
++ /* Fiber NICs only allow 1000 gbps Full duplex */
++ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
++ spddplx != (SPEED_1000 + DUPLEX_FULL)) {
++ e_err("Unsupported Speed/Duplex configuration\n");
++ return -EINVAL;
++ }
++
++ switch (spddplx) {
++ case SPEED_10 + DUPLEX_HALF:
++ mac->forced_speed_duplex = ADVERTISE_10_HALF;
++ break;
++ case SPEED_10 + DUPLEX_FULL:
++ mac->forced_speed_duplex = ADVERTISE_10_FULL;
++ break;
++ case SPEED_100 + DUPLEX_HALF:
++ mac->forced_speed_duplex = ADVERTISE_100_HALF;
++ break;
++ case SPEED_100 + DUPLEX_FULL:
++ mac->forced_speed_duplex = ADVERTISE_100_FULL;
++ break;
++ case SPEED_1000 + DUPLEX_FULL:
++ mac->autoneg = 1;
++ adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
++ break;
++ case SPEED_1000 + DUPLEX_HALF: /* not supported */
++ default:
++ e_err("Unsupported Speed/Duplex configuration\n");
++ return -EINVAL;
++ }
++ return 0;
++}
++
++static int e1000_set_settings(struct net_device *netdev,
++ struct ethtool_cmd *ecmd)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ struct e1000_hw *hw = &adapter->hw;
++
++ /*
++ * When SoL/IDER sessions are active, autoneg/speed/duplex
++ * cannot be changed
++ */
++ if (e1000_check_reset_block(hw)) {
++ e_err("Cannot change link characteristics when SoL/IDER is "
++ "active.\n");
++ return -EINVAL;
++ }
++
++ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
++ msleep(1);
++
++ if (ecmd->autoneg == AUTONEG_ENABLE) {
++ hw->mac.autoneg = 1;
++ if (hw->phy.media_type == e1000_media_type_fiber)
++ hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
++ ADVERTISED_FIBRE |
++ ADVERTISED_Autoneg;
++ else
++ hw->phy.autoneg_advertised = ecmd->advertising |
++ ADVERTISED_TP |
++ ADVERTISED_Autoneg;
++ ecmd->advertising = hw->phy.autoneg_advertised;
++ if (adapter->fc_autoneg) {
++ if (hw->mac.type == e1000_pchlan) {
++ /* Workaround h/w hang when Tx flow control
++ * enabled */
++ hw->fc.requested_mode = e1000_fc_rx_pause;
++ } else {
++ hw->fc.requested_mode = e1000_fc_default;
++ }
++ }
++ } else {
++ if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
++ clear_bit(__E1000_RESETTING, &adapter->state);
++ return -EINVAL;
++ }
++ }
++
++ /* reset the link */
++
++ if (netif_running(adapter->netdev)) {
++ e1000e_down(adapter);
++ e1000e_up(adapter);
++ } else {
++ e1000e_reset(adapter);
++ }
++
++ clear_bit(__E1000_RESETTING, &adapter->state);
++ return 0;
++}
++
++static void e1000_get_pauseparam(struct net_device *netdev,
++ struct ethtool_pauseparam *pause)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ struct e1000_hw *hw = &adapter->hw;
+
-+/* RSS registers */
-+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
-+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
-+#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
-+#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/
-+#define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt Rx VLAN Priority - RW */
-+#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) /* MSI-X Allocation Register (_i) - RW */
-+#define E1000_MSIXTADD(_i) (0x0C000 + ((_i) * 0x10)) /* MSI-X Table entry addr low reg 0 - RW */
-+#define E1000_MSIXTUADD(_i) (0x0C004 + ((_i) * 0x10)) /* MSI-X Table entry addr upper reg 0 - RW */
-+#define E1000_MSIXTMSG(_i) (0x0C008 + ((_i) * 0x10)) /* MSI-X Table entry message reg 0 - RW */
-+#define E1000_MSIXVCTRL(_i) (0x0C00C + ((_i) * 0x10)) /* MSI-X Table entry vector ctrl reg 0 - RW */
-+#define E1000_MSIXPBA 0x0E000 /* MSI-X Pending bit array */
-+#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW Array */
-+#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
-+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
-+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
-+#define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Message Type - RW */
-+#define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */
-+#endif
-diff -Nurp linux-2.6.22-0/drivers/net/e1000e/ethtool.c linux-2.6.22-10/drivers/net/e1000e/ethtool.c
---- linux-2.6.22-0/drivers/net/e1000e/ethtool.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/ethtool.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,2005 @@
-+/*******************************************************************************
++ pause->autoneg =
++ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
-+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ if (hw->fc.current_mode == e1000_fc_rx_pause) {
++ pause->rx_pause = 1;
++ } else if (hw->fc.current_mode == e1000_fc_tx_pause) {
++ pause->tx_pause = 1;
++ } else if (hw->fc.current_mode == e1000_fc_full) {
++ pause->rx_pause = 1;
++ pause->tx_pause = 1;
++ }
++}
+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms and conditions of the GNU General Public License,
-+ version 2, as published by the Free Software Foundation.
++static int e1000_set_pauseparam(struct net_device *netdev,
++ struct ethtool_pauseparam *pause)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ struct e1000_hw *hw = &adapter->hw;
++ int retval = 0;
+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ more details.
++ adapter->fc_autoneg = pause->autoneg;
+
-+ You should have received a copy of the GNU General Public License along with
-+ this program; if not, write to the Free Software Foundation, Inc.,
-+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
++ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
++ msleep(1);
+
-+ The full GNU General Public License is included in this distribution in
-+ the file called "COPYING".
++ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
++ if (hw->mac.type == e1000_pchlan) {
++ /* Workaround h/w hang when Tx flow control enabled */
++ hw->fc.requested_mode = e1000_fc_rx_pause;
++ } else {
++ hw->fc.requested_mode = e1000_fc_default;
++ }
++ if (netif_running(adapter->netdev)) {
++ e1000e_down(adapter);
++ e1000e_up(adapter);
++ } else {
++ e1000e_reset(adapter);
++ }
++ } else {
++ if (pause->rx_pause && pause->tx_pause)
++ hw->fc.requested_mode = e1000_fc_full;
++ else if (pause->rx_pause && !pause->tx_pause)
++ hw->fc.requested_mode = e1000_fc_rx_pause;
++ else if (!pause->rx_pause && pause->tx_pause)
++ hw->fc.requested_mode = e1000_fc_tx_pause;
++ else if (!pause->rx_pause && !pause->tx_pause)
++ hw->fc.requested_mode = e1000_fc_none;
+
-+ Contact Information:
-+ Linux NICS <linux.nics@intel.com>
-+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
++ hw->fc.current_mode = hw->fc.requested_mode;
+
-+*******************************************************************************/
++ retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
++ hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
++ }
+
-+/* ethtool support for e1000 */
++ clear_bit(__E1000_RESETTING, &adapter->state);
++ return retval;
++}
+
-+#include <linux/netdevice.h>
-+#ifdef SIOCETHTOOL
-+#include <linux/ethtool.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
++static u32 e1000_get_rx_csum(struct net_device *netdev)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ return adapter->flags & FLAG_RX_CSUM_ENABLED;
++}
+
-+#include "e1000.h"
++static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++
++ if (data)
++ adapter->flags |= FLAG_RX_CSUM_ENABLED;
++ else
++ adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
++
++ if (netif_running(netdev))
++ e1000e_reinit_locked(adapter);
++ else
++ e1000e_reset(adapter);
++ return 0;
++}
++
++static u32 e1000_get_tx_csum(struct net_device *netdev)
++{
++ return ((netdev->features & NETIF_F_HW_CSUM) != 0);
++}
++
++static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
++{
++ if (data)
++ netdev->features |= NETIF_F_HW_CSUM;
++ else
++ netdev->features &= ~NETIF_F_HW_CSUM;
++
++ return 0;
++}
++
++#ifdef NETIF_F_TSO
++static int e1000_set_tso(struct net_device *netdev, u32 data)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ int i;
++ struct net_device *v_netdev;
++
++ if (data) {
++ netdev->features |= NETIF_F_TSO;
++#ifdef NETIF_F_TSO6
++ netdev->features |= NETIF_F_TSO6;
++#endif
++ } else {
++ netdev->features &= ~NETIF_F_TSO;
++#ifdef NETIF_F_TSO6
++ netdev->features &= ~NETIF_F_TSO6;
++#endif
+#ifdef NETIF_F_HW_VLAN_TX
-+#include <linux/if_vlan.h>
++ /* disable TSO on all VLANs if they're present */
++ if (!adapter->vlgrp)
++ goto tso_out;
++ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
++ v_netdev = vlan_group_get_device(adapter->vlgrp, i);
++ if (!v_netdev)
++ continue;
++
++ v_netdev->features &= ~NETIF_F_TSO;
++#ifdef NETIF_F_TSO6
++ v_netdev->features &= ~NETIF_F_TSO6;
+#endif
++ vlan_group_set_device(adapter->vlgrp, i, v_netdev);
++ }
++#endif
++ }
+
-+#ifdef ETHTOOL_OPS_COMPAT
-+#include "kcompat_ethtool.c"
++tso_out:
++ e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
++ adapter->flags |= FLAG_TSO_FORCE;
++ return 0;
++}
+#endif
+
-+struct e1000_stats {
-+ char stat_string[ETH_GSTRING_LEN];
-+ int sizeof_stat;
-+ int stat_offset;
-+};
++static u32 e1000_get_msglevel(struct net_device *netdev)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ return adapter->msg_enable;
++}
+
-+#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
-+ offsetof(struct e1000_adapter, m)
-+static const struct e1000_stats e1000_gstrings_stats[] = {
-+ { "rx_packets", E1000_STAT(stats.gprc) },
-+ { "tx_packets", E1000_STAT(stats.gptc) },
-+ { "rx_bytes", E1000_STAT(stats.gorc) },
-+ { "tx_bytes", E1000_STAT(stats.gotc) },
-+ { "rx_broadcast", E1000_STAT(stats.bprc) },
-+ { "tx_broadcast", E1000_STAT(stats.bptc) },
-+ { "rx_multicast", E1000_STAT(stats.mprc) },
-+ { "tx_multicast", E1000_STAT(stats.mptc) },
-+ { "rx_errors", E1000_STAT(net_stats.rx_errors) },
-+ { "tx_errors", E1000_STAT(net_stats.tx_errors) },
-+ { "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
-+ { "multicast", E1000_STAT(stats.mprc) },
-+ { "collisions", E1000_STAT(stats.colc) },
-+ { "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) },
-+ { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
-+ { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
-+ { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
-+ { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
-+ { "rx_missed_errors", E1000_STAT(stats.mpc) },
-+ { "tx_aborted_errors", E1000_STAT(stats.ecol) },
-+ { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
-+ { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
-+ { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
-+ { "tx_window_errors", E1000_STAT(stats.latecol) },
-+ { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
-+ { "tx_deferred_ok", E1000_STAT(stats.dc) },
-+ { "tx_single_coll_ok", E1000_STAT(stats.scc) },
-+ { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
-+ { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
-+ { "tx_restart_queue", E1000_STAT(restart_queue) },
-+ { "rx_long_length_errors", E1000_STAT(stats.roc) },
-+ { "rx_short_length_errors", E1000_STAT(stats.ruc) },
-+ { "rx_align_errors", E1000_STAT(stats.algnerrc) },
-+ { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
-+ { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
-+ { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
-+ { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
-+ { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
-+ { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
-+ { "rx_long_byte_count", E1000_STAT(stats.gorc) },
-+ { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
-+ { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
-+ { "rx_header_split", E1000_STAT(rx_hdr_split) },
-+ { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
-+ { "tx_smbus", E1000_STAT(stats.mgptc) },
-+ { "rx_smbus", E1000_STAT(stats.mgprc) },
-+ { "dropped_smbus", E1000_STAT(stats.mgpdc) },
-+ { "rx_dma_failed", E1000_STAT(rx_dma_failed) },
-+ { "tx_dma_failed", E1000_STAT(tx_dma_failed) },
-+};
++static void e1000_set_msglevel(struct net_device *netdev, u32 data)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ adapter->msg_enable = data;
++}
++
++static int e1000_get_regs_len(struct net_device *netdev)
++{
++#define E1000_REGS_LEN 32 /* overestimate */
++ return E1000_REGS_LEN * sizeof(u32);
++}
++
++static void e1000_get_regs(struct net_device *netdev,
++ struct ethtool_regs *regs, void *p)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ struct e1000_hw *hw = &adapter->hw;
++ u32 *regs_buff = p;
++ u16 phy_data;
++ u8 revision_id;
++
++ memset(p, 0, E1000_REGS_LEN * sizeof(u32));
++
++ pci_read_config_byte(adapter->pdev, PCI_REVISION_ID, &revision_id);
++
++ regs->version = (1 << 24) | (revision_id << 16) | adapter->pdev->device;
+
-+#define E1000_GLOBAL_STATS_LEN \
-+ sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats)
-+#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN)
-+static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
-+ "Register test (offline)", "Eeprom test (offline)",
-+ "Interrupt test (offline)", "Loopback test (offline)",
-+ "Link test (on/offline)"
-+};
-+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
++ regs_buff[0] = er32(CTRL);
++ regs_buff[1] = er32(STATUS);
+
-+static int e1000_get_settings(struct net_device *netdev,
-+ struct ethtool_cmd *ecmd)
++ regs_buff[2] = er32(RCTL);
++ regs_buff[3] = er32(RDLEN(0));
++ regs_buff[4] = er32(RDH(0));
++ regs_buff[5] = er32(RDT(0));
++ regs_buff[6] = er32(RDTR);
++
++ regs_buff[7] = er32(TCTL);
++ regs_buff[8] = er32(TDLEN(0));
++ regs_buff[9] = er32(TDH(0));
++ regs_buff[10] = er32(TDT(0));
++ regs_buff[11] = er32(TIDV);
++
++ regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */
++
++ /* ethtool doesn't use anything past this point, so all this
++ * code is likely legacy junk for apps that may or may not
++ * exist */
++ if (hw->phy.type == e1000_phy_m88) {
++ e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
++ regs_buff[13] = (u32)phy_data; /* cable length */
++ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
++ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
++ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
++ e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
++ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
++ regs_buff[18] = regs_buff[13]; /* cable polarity */
++ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
++ regs_buff[20] = regs_buff[17]; /* polarity correction */
++ /* phy receive errors */
++ regs_buff[22] = adapter->phy_stats.receive_errors;
++ regs_buff[23] = regs_buff[13]; /* mdix mode */
++ }
++ regs_buff[21] = 0; /* was idle_errors */
++ e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
++ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
++ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
++}
++
++static int e1000_get_eeprom_len(struct net_device *netdev)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ return adapter->hw.nvm.word_size * 2;
++}
++
++static int e1000_get_eeprom(struct net_device *netdev,
++ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
-+ u32 status;
++ u16 *eeprom_buff;
++ int first_word;
++ int last_word;
++ int ret_val = 0;
++ u16 i;
+
-+ if (hw->phy.media_type == e1000_media_type_copper) {
++ if (eeprom->len == 0)
++ return -EINVAL;
+
-+ ecmd->supported = (SUPPORTED_10baseT_Half |
-+ SUPPORTED_10baseT_Full |
-+ SUPPORTED_100baseT_Half |
-+ SUPPORTED_100baseT_Full |
-+ SUPPORTED_1000baseT_Full |
-+ SUPPORTED_Autoneg |
-+ SUPPORTED_TP);
-+ if (hw->phy.type == e1000_phy_ife)
-+ ecmd->supported &= ~SUPPORTED_1000baseT_Full;
-+ ecmd->advertising = ADVERTISED_TP;
++ eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16);
+
-+ if (hw->mac.autoneg == 1) {
-+ ecmd->advertising |= ADVERTISED_Autoneg;
-+ /* the e1000 autoneg seems to match ethtool nicely */
-+ ecmd->advertising |= hw->phy.autoneg_advertised;
-+ }
++ first_word = eeprom->offset >> 1;
++ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
-+ ecmd->port = PORT_TP;
-+ ecmd->phy_address = hw->phy.addr;
-+ ecmd->transceiver = XCVR_INTERNAL;
++ eeprom_buff = kmalloc(sizeof(u16) *
++ (last_word - first_word + 1), GFP_KERNEL);
++ if (!eeprom_buff)
++ return -ENOMEM;
+
++ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
++ ret_val = e1000_read_nvm(hw, first_word,
++ last_word - first_word + 1,
++ eeprom_buff);
+ } else {
-+ ecmd->supported = (SUPPORTED_1000baseT_Full |
-+ SUPPORTED_FIBRE |
-+ SUPPORTED_Autoneg);
-+
-+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
-+ ADVERTISED_FIBRE |
-+ ADVERTISED_Autoneg);
-+
-+ ecmd->port = PORT_FIBRE;
-+ ecmd->transceiver = XCVR_EXTERNAL;
++ for (i = 0; i < last_word - first_word + 1; i++) {
++ ret_val = e1000_read_nvm(hw, first_word + i, 1,
++ &eeprom_buff[i]);
++ if (ret_val)
++ break;
++ }
+ }
+
-+ status = er32(STATUS);
-+ if (status & E1000_STATUS_LU) {
-+ if (status & E1000_STATUS_SPEED_1000)
-+ ecmd->speed = 1000;
-+ else if (status & E1000_STATUS_SPEED_100)
-+ ecmd->speed = 100;
-+ else
-+ ecmd->speed = 10;
-+
-+ if (status & E1000_STATUS_FD)
-+ ecmd->duplex = DUPLEX_FULL;
-+ else
-+ ecmd->duplex = DUPLEX_HALF;
++ if (ret_val) {
++ /* a read error occurred, throw away the result */
++ memset(eeprom_buff, 0xff, sizeof(eeprom_buff));
+ } else {
-+ ecmd->speed = -1;
-+ ecmd->duplex = -1;
++ /* Device's eeprom is always little-endian, word addressable */
++ for (i = 0; i < last_word - first_word + 1; i++)
++ le16_to_cpus(&eeprom_buff[i]);
+ }
+
-+ ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
-+ hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
-+ return 0;
++ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
++ kfree(eeprom_buff);
++
++ return ret_val;
+}
+
-+static u32 e1000_get_link(struct net_device *netdev)
++static int e1000_set_eeprom(struct net_device *netdev,
++ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
-+ u32 status;
-+
-+ status = er32(STATUS);
-+ return (status & E1000_STATUS_LU);
-+}
++ u16 *eeprom_buff;
++ void *ptr;
++ int max_len;
++ int first_word;
++ int last_word;
++ int ret_val = 0;
++ u16 i;
+
-+static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
-+{
-+ struct e1000_mac_info *mac = &adapter->hw.mac;
++ if (eeprom->len == 0)
++ return -EOPNOTSUPP;
+
-+ mac->autoneg = 0;
++ if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
++ return -EFAULT;
+
-+ /* Fiber NICs only allow 1000 gbps Full duplex */
-+ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
-+ spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-+ e_err("Unsupported Speed/Duplex configuration\n");
-+ return -EINVAL;
-+ }
++ max_len = hw->nvm.word_size * 2;
+
-+ switch (spddplx) {
-+ case SPEED_10 + DUPLEX_HALF:
-+ mac->forced_speed_duplex = ADVERTISE_10_HALF;
-+ break;
-+ case SPEED_10 + DUPLEX_FULL:
-+ mac->forced_speed_duplex = ADVERTISE_10_FULL;
-+ break;
-+ case SPEED_100 + DUPLEX_HALF:
-+ mac->forced_speed_duplex = ADVERTISE_100_HALF;
-+ break;
-+ case SPEED_100 + DUPLEX_FULL:
-+ mac->forced_speed_duplex = ADVERTISE_100_FULL;
-+ break;
-+ case SPEED_1000 + DUPLEX_FULL:
-+ mac->autoneg = 1;
-+ adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
-+ break;
-+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
-+ default:
-+ e_err("Unsupported Speed/Duplex configuration\n");
-+ return -EINVAL;
++ first_word = eeprom->offset >> 1;
++ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
++ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
++ if (!eeprom_buff)
++ return -ENOMEM;
++
++ ptr = (void *)eeprom_buff;
++
++ if (eeprom->offset & 1) {
++ /* need read/modify/write of first changed EEPROM word */
++ /* only the second byte of the word is being modified */
++ ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]);
++ ptr++;
+ }
-+ return 0;
++ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0))
++ /* need read/modify/write of last changed EEPROM word */
++ /* only the first byte of the word is being modified */
++ ret_val = e1000_read_nvm(hw, last_word, 1,
++ &eeprom_buff[last_word - first_word]);
++
++ if (ret_val)
++ goto out;
++
++ /* Device's eeprom is always little-endian, word addressable */
++ for (i = 0; i < last_word - first_word + 1; i++)
++ le16_to_cpus(&eeprom_buff[i]);
++
++ memcpy(ptr, bytes, eeprom->len);
++
++ for (i = 0; i < last_word - first_word + 1; i++)
++ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
++
++ ret_val = e1000_write_nvm(hw, first_word,
++ last_word - first_word + 1, eeprom_buff);
++
++ if (ret_val)
++ goto out;
++
++ /*
++ * Update the checksum over the first part of the EEPROM if needed
++ * and flush shadow RAM for applicable controllers
++ */
++ if ((first_word <= NVM_CHECKSUM_REG) ||
++ (hw->mac.type == e1000_82583) ||
++ (hw->mac.type == e1000_82574) ||
++ (hw->mac.type == e1000_82573))
++ ret_val = e1000e_update_nvm_checksum(hw);
++
++out:
++ kfree(eeprom_buff);
++ return ret_val;
+}
+
-+static int e1000_set_settings(struct net_device *netdev,
-+ struct ethtool_cmd *ecmd)
++static void e1000_get_drvinfo(struct net_device *netdev,
++ struct ethtool_drvinfo *drvinfo)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
++ char firmware_version[32];
++
++ strncpy(drvinfo->driver, e1000e_driver_name, 32);
++ strncpy(drvinfo->version, e1000e_driver_version, 32);
+
+ /*
-+ * When SoL/IDER sessions are active, autoneg/speed/duplex
-+ * cannot be changed
++ * EEPROM image version # is reported as firmware version # for
++ * PCI-E controllers
+ */
-+ if (hw->phy.ops.check_reset_block &&
-+ hw->phy.ops.check_reset_block(&adapter->hw)) {
-+ e_err("Cannot change link characteristics when SoL/IDER"
-+ " is active.\n");
++ sprintf(firmware_version, "%d.%d-%d",
++ (adapter->eeprom_vers & 0xF000) >> 12,
++ (adapter->eeprom_vers & 0x0FF0) >> 4,
++ (adapter->eeprom_vers & 0x000F));
++
++ strncpy(drvinfo->fw_version, firmware_version, 32);
++ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
++ drvinfo->regdump_len = e1000_get_regs_len(netdev);
++ drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
++}
++
++static void e1000_get_ringparam(struct net_device *netdev,
++ struct ethtool_ringparam *ring)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ struct e1000_ring *tx_ring = adapter->tx_ring;
++ struct e1000_ring *rx_ring = adapter->rx_ring;
++
++ ring->rx_max_pending = E1000_MAX_RXD;
++ ring->tx_max_pending = E1000_MAX_TXD;
++ ring->rx_mini_max_pending = 0;
++ ring->rx_jumbo_max_pending = 0;
++ ring->rx_pending = rx_ring->count;
++ ring->tx_pending = tx_ring->count;
++ ring->rx_mini_pending = 0;
++ ring->rx_jumbo_pending = 0;
++}
++
++static int e1000_set_ringparam(struct net_device *netdev,
++ struct ethtool_ringparam *ring)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ struct e1000_ring *tx_ring, *tx_old;
++ struct e1000_ring *rx_ring, *rx_old;
++ int err;
++
++ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
-+ }
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+ msleep(1);
+
-+ if (ecmd->autoneg == AUTONEG_ENABLE) {
-+ hw->mac.autoneg = 1;
-+ if (hw->phy.media_type == e1000_media_type_fiber)
-+ hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
-+ ADVERTISED_FIBRE |
-+ ADVERTISED_Autoneg;
-+ else
-+ hw->phy.autoneg_advertised = ecmd->advertising |
-+ ADVERTISED_TP |
-+ ADVERTISED_Autoneg;
-+ ecmd->advertising = hw->phy.autoneg_advertised;
-+ if (adapter->fc_autoneg)
-+ hw->fc.original_type = e1000_fc_default;
-+ } else {
-+ if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
-+ clear_bit(__E1000_RESETTING, &adapter->state);
-+ return -EINVAL;
-+ }
-+ }
++ if (netif_running(adapter->netdev))
++ e1000e_down(adapter);
+
-+ /* reset the link */
++ tx_old = adapter->tx_ring;
++ rx_old = adapter->rx_ring;
++
++ err = -ENOMEM;
++ tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
++ if (!tx_ring)
++ goto err_alloc_tx;
++ /*
++ * use a memcpy to save any previously configured
++ * items like napi structs from having to be
++ * reinitialized
++ */
++ memcpy(tx_ring, tx_old, sizeof(struct e1000_ring));
++
++ rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
++ if (!rx_ring)
++ goto err_alloc_rx;
++ memcpy(rx_ring, rx_old, sizeof(struct e1000_ring));
++
++ adapter->tx_ring = tx_ring;
++ adapter->rx_ring = rx_ring;
++
++ rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD);
++ rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD));
++ rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
++
++ tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD);
++ tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD));
++ tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if (netif_running(adapter->netdev)) {
-+ e1000_down(adapter);
-+ e1000_up(adapter);
-+ } else {
-+ e1000_reset(adapter);
++ /* Try to get new resources before deleting old */
++ err = e1000e_setup_rx_resources(adapter);
++ if (err)
++ goto err_setup_rx;
++ err = e1000e_setup_tx_resources(adapter);
++ if (err)
++ goto err_setup_tx;
++
++ /*
++ * restore the old in order to free it,
++ * then add in the new
++ */
++ adapter->rx_ring = rx_old;
++ adapter->tx_ring = tx_old;
++ e1000e_free_rx_resources(adapter);
++ e1000e_free_tx_resources(adapter);
++ kfree(tx_old);
++ kfree(rx_old);
++ adapter->rx_ring = rx_ring;
++ adapter->tx_ring = tx_ring;
++ err = e1000e_up(adapter);
++ if (err)
++ goto err_setup;
+ }
+
+ clear_bit(__E1000_RESETTING, &adapter->state);
+ return 0;
++err_setup_tx:
++ e1000e_free_rx_resources(adapter);
++err_setup_rx:
++ adapter->rx_ring = rx_old;
++ adapter->tx_ring = tx_old;
++ kfree(rx_ring);
++err_alloc_rx:
++ kfree(tx_ring);
++err_alloc_tx:
++ e1000e_up(adapter);
++err_setup:
++ clear_bit(__E1000_RESETTING, &adapter->state);
++ return err;
+}
+
-+static void e1000_get_pauseparam(struct net_device *netdev,
-+ struct ethtool_pauseparam *pause)
++static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
++ int reg, int offset, u32 mask, u32 write)
+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
-+
-+ pause->autoneg =
-+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
-+
-+ if (hw->fc.type == e1000_fc_rx_pause) {
-+ pause->rx_pause = 1;
-+ } else if (hw->fc.type == e1000_fc_tx_pause) {
-+ pause->tx_pause = 1;
-+ } else if (hw->fc.type == e1000_fc_full) {
-+ pause->rx_pause = 1;
-+ pause->tx_pause = 1;
++ u32 pat, val;
++ static const u32 test[] =
++ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
++ for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
++ E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
++ (test[pat] & write));
++ val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
++ if (val != (test[pat] & write & mask)) {
++ e_err("Register 0x%05X pattern test failed: got 0x%08X "
++ "expected 0x%08X\n", reg + offset, val,
++ (test[pat] & write & mask));
++ *data = reg;
++ return 1;
++ }
+ }
++ return 0;
+}
+
-+static int e1000_set_pauseparam(struct net_device *netdev,
-+ struct ethtool_pauseparam *pause)
++static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
++ int reg, u32 mask, u32 write)
+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
-+ int retval = 0;
++ u32 val;
++ __ew32(&adapter->hw, reg, write & mask);
++ val = __er32(&adapter->hw, reg);
++ if ((write & mask) != (val & mask)) {
++ e_err("Register 0x%05X set/check test failed: got 0x%08X "
++ "expected 0x%08X\n", reg, (val & mask), (write & mask));
++ *data = reg;
++ return 1;
++ }
++ return 0;
++}
++#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
++ do { \
++ if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
++ return 1; \
++ } while (0)
++#define REG_PATTERN_TEST(reg, mask, write) \
++ REG_PATTERN_TEST_ARRAY(reg, 0, mask, write)
+
-+ adapter->fc_autoneg = pause->autoneg;
++#define REG_SET_AND_CHECK(reg, mask, write) \
++ do { \
++ if (reg_set_and_check(adapter, data, reg, mask, write)) \
++ return 1; \
++ } while (0)
+
-+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
-+ msleep(1);
++static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
++{
++ struct e1000_hw *hw = &adapter->hw;
++ struct e1000_mac_info *mac = &adapter->hw.mac;
++ u32 value;
++ u32 before;
++ u32 after;
++ u32 i;
++ u32 toggle;
++ u32 mask;
+
-+ if (pause->rx_pause && pause->tx_pause)
-+ hw->fc.type = e1000_fc_full;
-+ else if (pause->rx_pause && !pause->tx_pause)
-+ hw->fc.type = e1000_fc_rx_pause;
-+ else if (!pause->rx_pause && pause->tx_pause)
-+ hw->fc.type = e1000_fc_tx_pause;
-+ else if (!pause->rx_pause && !pause->tx_pause)
-+ hw->fc.type = e1000_fc_none;
++ /*
++ * The status register is Read Only, so a write should fail.
++ * Some bits that get toggled are ignored.
++ */
++ switch (mac->type) {
++ /* there are several bits on newer hardware that are r/w */
++ case e1000_82571:
++ case e1000_82572:
++ case e1000_80003es2lan:
++ toggle = 0x7FFFF3FF;
++ break;
++ default:
++ toggle = 0x7FFFF033;
++ break;
++ }
+
-+ hw->fc.original_type = hw->fc.type;
++ before = er32(STATUS);
++ value = (er32(STATUS) & toggle);
++ ew32(STATUS, toggle);
++ after = er32(STATUS) & toggle;
++ if (value != after) {
++ e_err("failed STATUS register test got: 0x%08X expected: "
++ "0x%08X\n", after, value);
++ *data = 1;
++ return 1;
++ }
++ /* restore previous status */
++ ew32(STATUS, before);
+
-+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
-+ hw->fc.type = e1000_fc_default;
-+ if (netif_running(adapter->netdev)) {
-+ e1000_down(adapter);
-+ e1000_up(adapter);
-+ } else {
-+ e1000_reset(adapter);
-+ }
-+ } else {
-+ retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
-+ hw->mac.ops.setup_link(hw) :
-+ e1000_force_mac_fc_generic(hw));
++ if (!(adapter->flags & FLAG_IS_ICH)) {
++ REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
++ REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF);
++ REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF);
++ REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF);
+ }
+
-+ clear_bit(__E1000_RESETTING, &adapter->state);
-+ return retval;
-+}
++ REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF);
++ REG_PATTERN_TEST(E1000_RDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF);
++ REG_PATTERN_TEST(E1000_RDLEN(0), 0x000FFF80, 0x000FFFFF);
++ REG_PATTERN_TEST(E1000_RDH(0), 0x0000FFFF, 0x0000FFFF);
++ REG_PATTERN_TEST(E1000_RDT(0), 0x0000FFFF, 0x0000FFFF);
++ REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8);
++ REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF);
++ REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
++ REG_PATTERN_TEST(E1000_TDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF);
++ REG_PATTERN_TEST(E1000_TDLEN(0), 0x000FFF80, 0x000FFFFF);
+
-+static u32 e1000_get_rx_csum(struct net_device *netdev)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ return (adapter->flags & FLAG_RX_CSUM_ENABLED);
-+}
++ REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
+
-+static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
++ before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE);
++ REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB);
++ REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
+
-+ if (data)
-+ adapter->flags |= FLAG_RX_CSUM_ENABLED;
-+ else
-+ adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
++ REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
++ REG_PATTERN_TEST(E1000_RDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF);
++ if (!(adapter->flags & FLAG_IS_ICH))
++ REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
++ REG_PATTERN_TEST(E1000_TDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF);
++ REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
++ mask = 0x8003FFFF;
++ switch (mac->type) {
++ case e1000_ich10lan:
++ case e1000_pchlan:
++ mask |= (1 << 18);
++ break;
++ default:
++ break;
++ }
++ for (i = 0; i < mac->rar_entry_count; i++)
++ REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
++ mask, 0xFFFFFFFF);
+
-+ if (netif_running(netdev))
-+ e1000_reinit_locked(adapter);
-+ else
-+ e1000_reset(adapter);
++ for (i = 0; i < mac->mta_reg_count; i++)
++ REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
++
++ *data = 0;
+ return 0;
+}
+
-+static u32 e1000_get_tx_csum(struct net_device *netdev)
++static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
+{
-+ return ((netdev->features & NETIF_F_HW_CSUM) != 0);
-+}
++ u16 temp;
++ u16 checksum = 0;
++ u16 i;
+
-+static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
-+{
-+ if (data)
-+ netdev->features |= NETIF_F_HW_CSUM;
-+ else
-+ netdev->features &= ~NETIF_F_HW_CSUM;
++ *data = 0;
++ /* Read and add up the contents of the EEPROM */
++ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
++ if ((e1000_read_nvm(&adapter->hw, i, 1, &temp)) < 0) {
++ *data = 1;
++ return *data;
++ }
++ checksum += temp;
++ }
++
++ /* If Checksum is not Correct return error else test passed */
++ if ((checksum != (u16) NVM_SUM) && !(*data))
++ *data = 2;
+
-+ return 0;
++ return *data;
+}
+
-+#ifdef NETIF_F_TSO
-+static int e1000_set_tso(struct net_device *netdev, u32 data)
++static irqreturn_t e1000_test_intr(int irq, void *data)
+{
++ struct net_device *netdev = (struct net_device *) data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ int i;
-+ struct net_device *v_netdev;
++ struct e1000_hw *hw = &adapter->hw;
+
-+ if (data) {
-+ netdev->features |= NETIF_F_TSO;
-+#ifdef NETIF_F_TSO6
-+ netdev->features |= NETIF_F_TSO6;
-+#endif
-+ } else {
-+ netdev->features &= ~NETIF_F_TSO;
-+#ifdef NETIF_F_TSO6
-+ netdev->features &= ~NETIF_F_TSO6;
++ adapter->test_icr |= er32(ICR);
++
++ return IRQ_HANDLED;
++}
++
++static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
++{
++ struct net_device *netdev = adapter->netdev;
++ struct e1000_hw *hw = &adapter->hw;
++ u32 mask;
++ u32 shared_int = 1;
++ u32 irq = adapter->pdev->irq;
++ int i;
++#ifdef CONFIG_E1000E_MSIX
++ int ret_val = 0;
++ int int_mode = E1000E_INT_MODE_LEGACY;
+#endif
-+#ifdef NETIF_F_HW_VLAN_TX
-+ /* disable TSO on all VLANs if they're present */
-+ if (!adapter->vlgrp)
-+ goto tso_out;
-+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
-+ v_netdev = vlan_group_get_device(adapter->vlgrp, i);
-+ if (!v_netdev)
-+ continue;
+
-+ v_netdev->features &= ~NETIF_F_TSO;
-+#ifdef NETIF_F_TSO6
-+ v_netdev->features &= ~NETIF_F_TSO6;
++ *data = 0;
++
++#ifdef CONFIG_E1000E_MSIX
++ /* NOTE: we don't test MSI/MSI-X interrupts here, yet */
++ if (adapter->int_mode == E1000E_INT_MODE_MSIX) {
++ int_mode = adapter->int_mode;
++ e1000e_reset_interrupt_capability(adapter);
++ adapter->int_mode = E1000E_INT_MODE_LEGACY;
++ e1000e_set_interrupt_capability(adapter);
++ }
++#else
++ /* NOTE: we don't test MSI interrupts here, yet */
+#endif
-+ vlan_group_set_device(adapter->vlgrp, i, v_netdev);
-+ }
++ /* Hook up test interrupt handler just for this test */
++ if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
++ netdev)) {
++ shared_int = 0;
++ } else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
++ netdev->name, netdev)) {
++ *data = 1;
++#ifdef CONFIG_E1000E_MSIX
++ ret_val = -1;
++ goto out;
++#else
++ return -1;
+#endif
+ }
-+
-+tso_out:
-+ e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
-+ adapter->flags |= FLAG_TSO_FORCE;
-+ return 0;
-+}
-+#endif
++ e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
+
-+static u32 e1000_get_msglevel(struct net_device *netdev)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ return adapter->msg_enable;
-+}
++ /* Disable all the interrupts */
++ ew32(IMC, 0xFFFFFFFF);
++ msleep(10);
+
-+static void e1000_set_msglevel(struct net_device *netdev, u32 data)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ adapter->msg_enable = data;
-+}
++ /* Test each interrupt */
++ for (i = 0; i < 10; i++) {
++ /* Interrupt to test */
++ mask = 1 << i;
+
-+static int e1000_get_regs_len(struct net_device *netdev)
-+{
-+#define E1000_REGS_LEN 32 /* overestimate */
-+ return E1000_REGS_LEN * sizeof(u32);
-+}
++ if (adapter->flags & FLAG_IS_ICH) {
++ switch (mask) {
++ case E1000_ICR_RXSEQ:
++ continue;
++ case 0x00000100:
++ if (adapter->hw.mac.type == e1000_ich8lan ||
++ adapter->hw.mac.type == e1000_ich9lan)
++ continue;
++ break;
++ default:
++ break;
++ }
++ }
+
-+static void e1000_get_regs(struct net_device *netdev,
-+ struct ethtool_regs *regs, void *p)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
-+ u32 *regs_buff = p;
-+ u16 phy_data;
-+ u8 revision_id;
++ if (!shared_int) {
++ /*
++ * Disable the interrupt to be reported in
++ * the cause register and then force the same
++ * interrupt and see if one gets posted. If
++ * an interrupt was posted to the bus, the
++ * test failed.
++ */
++ adapter->test_icr = 0;
++ ew32(IMC, mask);
++ ew32(ICS, mask);
++ msleep(10);
+
-+ memset(p, 0, E1000_REGS_LEN * sizeof(u32));
++ if (adapter->test_icr & mask) {
++ *data = 3;
++ break;
++ }
++ }
+
-+ pci_read_config_byte(adapter->pdev, PCI_REVISION_ID, &revision_id);
++ /*
++ * Enable the interrupt to be reported in
++ * the cause register and then force the same
++ * interrupt and see if one gets posted. If
++ * an interrupt was not posted to the bus, the
++ * test failed.
++ */
++ adapter->test_icr = 0;
++ ew32(IMS, mask);
++ ew32(ICS, mask);
++ msleep(10);
+
-+ regs->version = (1 << 24) | (revision_id << 16) | adapter->pdev->device;
++ if (!(adapter->test_icr & mask)) {
++ *data = 4;
++ break;
++ }
+
-+ regs_buff[0] = er32(CTRL);
-+ regs_buff[1] = er32(STATUS);
++ if (!shared_int) {
++ /*
++ * Disable the other interrupts to be reported in
++ * the cause register and then force the other
++ * interrupts and see if any get posted. If
++ * an interrupt was posted to the bus, the
++ * test failed.
++ */
++ adapter->test_icr = 0;
++ ew32(IMC, ~mask & 0x00007FFF);
++ ew32(ICS, ~mask & 0x00007FFF);
++ msleep(10);
+
-+ regs_buff[2] = er32(RCTL);
-+ regs_buff[3] = er32(RDLEN(0));
-+ regs_buff[4] = er32(RDH(0));
-+ regs_buff[5] = er32(RDT(0));
-+ regs_buff[6] = er32(RDTR);
++ if (adapter->test_icr) {
++ *data = 5;
++ break;
++ }
++ }
++ }
+
-+ regs_buff[7] = er32(TCTL);
-+ regs_buff[8] = er32(TDLEN(0));
-+ regs_buff[9] = er32(TDH(0));
-+ regs_buff[10] = er32(TDT(0));
-+ regs_buff[11] = er32(TIDV);
++ /* Disable all the interrupts */
++ ew32(IMC, 0xFFFFFFFF);
++ msleep(10);
+
-+ regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */
-+ if (hw->phy.type == e1000_phy_m88) {
-+ hw->phy.ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-+ regs_buff[13] = (u32)phy_data; /* cable length */
-+ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
-+ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
-+ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
-+ hw->phy.ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-+ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
-+ regs_buff[18] = regs_buff[13]; /* cable polarity */
-+ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
-+ regs_buff[20] = regs_buff[17]; /* polarity correction */
-+ /* phy receive errors */
-+ regs_buff[22] = adapter->phy_stats.receive_errors;
-+ regs_buff[23] = regs_buff[13]; /* mdix mode */
++ /* Unhook test interrupt handler */
++ free_irq(irq, netdev);
++
++#ifdef CONFIG_E1000E_MSIX
++out:
++ if (int_mode == E1000E_INT_MODE_MSIX) {
++ e1000e_reset_interrupt_capability(adapter);
++ adapter->int_mode = int_mode;
++ e1000e_set_interrupt_capability(adapter);
+ }
-+ regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
-+ hw->phy.ops.read_reg(hw, PHY_1000T_STATUS, &phy_data);
-+ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
-+ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
++
++ return ret_val;
++#else
++ return *data;
++#endif
+}
+
-+static int e1000_get_eeprom_len(struct net_device *netdev)
++static void e1000_free_desc_rings(struct e1000_adapter *adapter)
+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ return adapter->hw.nvm.word_size * 2;
++ struct e1000_ring *tx_ring = &adapter->test_tx_ring;
++ struct e1000_ring *rx_ring = &adapter->test_rx_ring;
++ struct pci_dev *pdev = adapter->pdev;
++ int i;
++
++ if (tx_ring->desc && tx_ring->buffer_info) {
++ for (i = 0; i < tx_ring->count; i++) {
++ if (tx_ring->buffer_info[i].dma)
++ pci_unmap_single(pdev,
++ tx_ring->buffer_info[i].dma,
++ tx_ring->buffer_info[i].length,
++ PCI_DMA_TODEVICE);
++ if (tx_ring->buffer_info[i].skb)
++ dev_kfree_skb(tx_ring->buffer_info[i].skb);
++ }
++ }
++
++ if (rx_ring->desc && rx_ring->buffer_info) {
++ for (i = 0; i < rx_ring->count; i++) {
++ if (rx_ring->buffer_info[i].dma)
++ pci_unmap_single(pdev,
++ rx_ring->buffer_info[i].dma,
++ 2048, PCI_DMA_FROMDEVICE);
++ if (rx_ring->buffer_info[i].skb)
++ dev_kfree_skb(rx_ring->buffer_info[i].skb);
++ }
++ }
++
++ if (tx_ring->desc) {
++ dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
++ tx_ring->dma);
++ tx_ring->desc = NULL;
++ }
++ if (rx_ring->desc) {
++ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
++ rx_ring->dma);
++ rx_ring->desc = NULL;
++ }
++
++ kfree(tx_ring->buffer_info);
++ tx_ring->buffer_info = NULL;
++ kfree(rx_ring->buffer_info);
++ rx_ring->buffer_info = NULL;
+}
+
-+static int e1000_get_eeprom(struct net_device *netdev,
-+ struct ethtool_eeprom *eeprom, u8 *bytes)
++static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
++ struct e1000_ring *tx_ring = &adapter->test_tx_ring;
++ struct e1000_ring *rx_ring = &adapter->test_rx_ring;
++ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
-+ u16 *eeprom_buff;
-+ int first_word;
-+ int last_word;
-+ int ret_val = 0;
-+ u16 i;
++ u32 rctl;
++ int i;
++ int ret_val;
+
-+ if (eeprom->len == 0)
-+ return -EINVAL;
++ /* Setup Tx descriptor ring and Tx buffers */
+
-+ eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16);
++ if (!tx_ring->count)
++ tx_ring->count = E1000_DEFAULT_TXD;
+
-+ first_word = eeprom->offset >> 1;
-+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
++ tx_ring->buffer_info = kcalloc(tx_ring->count,
++ sizeof(struct e1000_buffer),
++ GFP_KERNEL);
++ if (!(tx_ring->buffer_info)) {
++ ret_val = 1;
++ goto err_nomem;
++ }
+
-+ eeprom_buff = kmalloc(sizeof(u16) *
-+ (last_word - first_word + 1), GFP_KERNEL);
-+ if (!eeprom_buff)
-+ return -ENOMEM;
++ tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
++ tx_ring->size = ALIGN(tx_ring->size, 4096);
++ tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
++ &tx_ring->dma, GFP_KERNEL);
++ if (!tx_ring->desc) {
++ ret_val = 2;
++ goto err_nomem;
++ }
++ tx_ring->next_to_use = 0;
++ tx_ring->next_to_clean = 0;
+
-+ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
-+ ret_val = hw->nvm.ops.read(hw, first_word,
-+ last_word - first_word + 1,
-+ eeprom_buff);
-+ } else {
-+ for (i = 0; i < last_word - first_word + 1; i++) {
-+ ret_val = hw->nvm.ops.read(hw, first_word + i, 1,
-+ &eeprom_buff[i]);
-+ if (ret_val)
-+ break;
++ ew32(TDBAL(0), ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
++ ew32(TDBAH(0), ((u64) tx_ring->dma >> 32));
++ ew32(TDLEN(0), tx_ring->count * sizeof(struct e1000_tx_desc));
++ ew32(TDH(0), 0);
++ ew32(TDT(0), 0);
++ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR |
++ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
++ E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
++
++ for (i = 0; i < tx_ring->count; i++) {
++ struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
++ struct sk_buff *skb;
++ unsigned int skb_size = 1024;
++
++ skb = alloc_skb(skb_size, GFP_KERNEL);
++ if (!skb) {
++ ret_val = 3;
++ goto err_nomem;
++ }
++ skb_put(skb, skb_size);
++ tx_ring->buffer_info[i].skb = skb;
++ tx_ring->buffer_info[i].length = skb->len;
++ tx_ring->buffer_info[i].dma =
++ pci_map_single(pdev, skb->data, skb->len,
++ PCI_DMA_TODEVICE);
++ if (pci_dma_mapping_error(pdev, tx_ring->buffer_info[i].dma)) {
++ ret_val = 4;
++ goto err_nomem;
+ }
++ tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma);
++ tx_desc->lower.data = cpu_to_le32(skb->len);
++ tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
++ E1000_TXD_CMD_IFCS |
++ E1000_TXD_CMD_RS);
++ tx_desc->upper.data = 0;
+ }
+
-+ /* Device's eeprom is always little-endian, word addressable */
-+ for (i = 0; i < last_word - first_word + 1; i++)
-+ le16_to_cpus(&eeprom_buff[i]);
++ /* Setup Rx descriptor ring and Rx buffers */
+
-+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
-+ kfree(eeprom_buff);
++ if (!rx_ring->count)
++ rx_ring->count = E1000_DEFAULT_RXD;
+
-+ return ret_val;
-+}
++ rx_ring->buffer_info = kcalloc(rx_ring->count,
++ sizeof(struct e1000_buffer),
++ GFP_KERNEL);
++ if (!(rx_ring->buffer_info)) {
++ ret_val = 5;
++ goto err_nomem;
++ }
+
-+static int e1000_set_eeprom(struct net_device *netdev,
-+ struct ethtool_eeprom *eeprom, u8 *bytes)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
-+ u16 *eeprom_buff;
-+ void *ptr;
-+ int max_len;
-+ int first_word;
-+ int last_word;
-+ int ret_val = 0;
-+ u16 i;
++ rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
++ rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
++ &rx_ring->dma, GFP_KERNEL);
++ if (!rx_ring->desc) {
++ ret_val = 6;
++ goto err_nomem;
++ }
++ rx_ring->next_to_use = 0;
++ rx_ring->next_to_clean = 0;
+
-+ if (eeprom->len == 0)
-+ return -EOPNOTSUPP;
++ rctl = er32(RCTL);
++ ew32(RCTL, rctl & ~E1000_RCTL_EN);
++ ew32(RDBAL(0), ((u64) rx_ring->dma & 0xFFFFFFFF));
++ ew32(RDBAH(0), ((u64) rx_ring->dma >> 32));
++ ew32(RDLEN(0), rx_ring->size);
++ ew32(RDH(0), 0);
++ ew32(RDT(0), 0);
++ rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
++ E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
++ E1000_RCTL_SBP | E1000_RCTL_SECRC |
++ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
++ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
++ ew32(RCTL, rctl);
+
-+ if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
-+ return -EFAULT;
++ for (i = 0; i < rx_ring->count; i++) {
++ struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
++ struct sk_buff *skb;
+
-+ if (adapter->flags2 & FLAG2_READ_ONLY_NVM)
-+ return -EINVAL;
++ skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL);
++ if (!skb) {
++ ret_val = 7;
++ goto err_nomem;
++ }
++ skb_reserve(skb, NET_IP_ALIGN);
++ rx_ring->buffer_info[i].skb = skb;
++ rx_ring->buffer_info[i].dma =
++ pci_map_single(pdev, skb->data, 2048,
++ PCI_DMA_FROMDEVICE);
++ if (pci_dma_mapping_error(pdev, rx_ring->buffer_info[i].dma)) {
++ ret_val = 8;
++ goto err_nomem;
++ }
++ rx_desc->buffer_addr =
++ cpu_to_le64(rx_ring->buffer_info[i].dma);
++ memset(skb->data, 0x00, skb->len);
++ }
+
-+ max_len = hw->nvm.word_size * 2;
++ return 0;
+
-+ first_word = eeprom->offset >> 1;
-+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
-+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
-+ if (!eeprom_buff)
-+ return -ENOMEM;
++err_nomem:
++ e1000_free_desc_rings(adapter);
++ return ret_val;
++}
+
-+ ptr = (void *)eeprom_buff;
++static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
++{
++ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
++ e1e_wphy(&adapter->hw, 29, 0x001F);
++ e1e_wphy(&adapter->hw, 30, 0x8FFC);
++ e1e_wphy(&adapter->hw, 29, 0x001A);
++ e1e_wphy(&adapter->hw, 30, 0x8FF0);
++}
+
-+ if (eeprom->offset & 1) {
-+ /* need read/modify/write of first changed EEPROM word */
-+ /* only the second byte of the word is being modified */
-+ ret_val = hw->nvm.ops.read(hw, first_word, 1, &eeprom_buff[0]);
-+ ptr++;
-+ }
-+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0))
-+ /* need read/modify/write of last changed EEPROM word */
-+ /* only the first byte of the word is being modified */
-+ ret_val = hw->nvm.ops.read(hw, last_word, 1,
-+ &eeprom_buff[last_word - first_word]);
++static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
++{
++ struct e1000_hw *hw = &adapter->hw;
++ u32 ctrl_reg = 0;
++ u32 stat_reg = 0;
++ u16 phy_reg = 0;
+
-+ /* Device's eeprom is always little-endian, word addressable */
-+ for (i = 0; i < last_word - first_word + 1; i++)
-+ le16_to_cpus(&eeprom_buff[i]);
++ hw->mac.autoneg = 0;
+
-+ memcpy(ptr, bytes, eeprom->len);
++ if (hw->phy.type == e1000_phy_m88) {
++ /* Auto-MDI/MDIX Off */
++ e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
++ /* reset to update Auto-MDI/MDIX */
++ e1e_wphy(hw, PHY_CONTROL, 0x9140);
++ /* autoneg off */
++ e1e_wphy(hw, PHY_CONTROL, 0x8140);
++ } else if (hw->phy.type == e1000_phy_gg82563)
++ e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
+
-+ for (i = 0; i < last_word - first_word + 1; i++)
-+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
++ ctrl_reg = er32(CTRL);
+
-+ ret_val = hw->nvm.ops.write(hw, first_word, last_word - first_word + 1,
-+ eeprom_buff);
++ switch (hw->phy.type) {
++ case e1000_phy_ife:
++ /* force 100, set loopback */
++ e1e_wphy(hw, PHY_CONTROL, 0x6100);
+
-+ /*
-+ * Update the checksum over the first part of the EEPROM if needed
-+ * and flush shadow RAM for 82573 controllers
-+ */
-+ if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG) ||
-+ (hw->mac.type == e1000_82574) ||
-+ (hw->mac.type == e1000_82573)))
-+ hw->nvm.ops.update(hw);
++ /* Now set up the MAC to the same speed/duplex as the PHY. */
++ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
++ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
++ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
++ E1000_CTRL_SPD_100 |/* Force Speed to 100 */
++ E1000_CTRL_FD); /* Force Duplex to FULL */
++ break;
++ case e1000_phy_bm:
++ /* Set Default MAC Interface speed to 1GB */
++ e1e_rphy(hw, PHY_REG(2, 21), &phy_reg);
++ phy_reg &= ~0x0007;
++ phy_reg |= 0x006;
++ e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
++ /* Assert SW reset for above settings to take effect */
++ e1000e_commit_phy(hw);
++ mdelay(1);
++ /* Force Full Duplex */
++ e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
++ e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
++ /* Set Link Up (in force link) */
++ e1e_rphy(hw, PHY_REG(776, 16), &phy_reg);
++ e1e_wphy(hw, PHY_REG(776, 16), phy_reg | 0x0040);
++ /* Force Link */
++ e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
++ e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x0040);
++ /* Set Early Link Enable */
++ e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
++ e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400);
++ /* fall through */
++ default:
++ /* force 1000, set loopback */
++ e1e_wphy(hw, PHY_CONTROL, 0x4140);
++ mdelay(250);
+
-+ kfree(eeprom_buff);
-+ return ret_val;
-+}
++ /* Now set up the MAC to the same speed/duplex as the PHY. */
++ ctrl_reg = er32(CTRL);
++ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
++ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
++ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
++ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
++ E1000_CTRL_FD); /* Force Duplex to FULL */
+
-+static void e1000_get_drvinfo(struct net_device *netdev,
-+ struct ethtool_drvinfo *drvinfo)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
-+ char firmware_version[32];
-+ u16 eeprom_data;
++ if (adapter->flags & FLAG_IS_ICH)
++ ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */
++ }
++
++ if (hw->phy.media_type == e1000_media_type_copper &&
++ hw->phy.type == e1000_phy_m88) {
++ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
++ } else {
++ /*
++ * Set the ILOS bit on the fiber Nic if half duplex link is
++ * detected.
++ */
++ stat_reg = er32(STATUS);
++ if ((stat_reg & E1000_STATUS_FD) == 0)
++ ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
++ }
+
-+ strncpy(drvinfo->driver, e1000e_driver_name, 32);
-+ strncpy(drvinfo->version, e1000e_driver_version, 32);
++ ew32(CTRL, ctrl_reg);
+
+ /*
-+ * EEPROM image version # is reported as firmware version # for
-+ * PCI-E controllers
++ * Disable the receiver on the PHY so when a cable is plugged in, the
++ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
-+ hw->nvm.ops.read(&adapter->hw, 5, 1, &eeprom_data);
-+ sprintf(firmware_version, "%d.%d-%d",
-+ (eeprom_data & 0xF000) >> 12,
-+ (eeprom_data & 0x0FF0) >> 4,
-+ eeprom_data & 0x000F);
-+
-+ strncpy(drvinfo->fw_version, firmware_version, 32);
-+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
-+ drvinfo->regdump_len = e1000_get_regs_len(netdev);
-+ drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
-+}
++ if (hw->phy.type == e1000_phy_m88)
++ e1000_phy_disable_receiver(adapter);
+
-+static void e1000_get_ringparam(struct net_device *netdev,
-+ struct ethtool_ringparam *ring)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_ring *tx_ring = adapter->tx_ring;
-+ struct e1000_ring *rx_ring = adapter->rx_ring;
++ udelay(500);
+
-+ ring->rx_max_pending = E1000_MAX_RXD;
-+ ring->tx_max_pending = E1000_MAX_TXD;
-+ ring->rx_mini_max_pending = 0;
-+ ring->rx_jumbo_max_pending = 0;
-+ ring->rx_pending = rx_ring->count;
-+ ring->tx_pending = tx_ring->count;
-+ ring->rx_mini_pending = 0;
-+ ring->rx_jumbo_pending = 0;
++ return 0;
+}
+
-+static int e1000_set_ringparam(struct net_device *netdev,
-+ struct ethtool_ringparam *ring)
++static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_ring *tx_ring, *tx_old;
-+ struct e1000_ring *rx_ring, *rx_old;
-+ int err;
-+
-+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
-+ return -EINVAL;
-+
-+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
-+ msleep(1);
-+
-+ if (netif_running(adapter->netdev))
-+ e1000_down(adapter);
++ struct e1000_hw *hw = &adapter->hw;
++ u32 ctrl = er32(CTRL);
++ int link = 0;
+
-+ tx_old = adapter->tx_ring;
-+ rx_old = adapter->rx_ring;
++ /* special requirements for 82571/82572 fiber adapters */
+
-+ err = -ENOMEM;
-+ tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
-+ if (!tx_ring)
-+ goto err_alloc_tx;
+ /*
-+ * use a memcpy to save any previously configured
-+ * items like napi structs from having to be
-+ * reinitialized
++ * jump through hoops to make sure link is up because serdes
++ * link is hardwired up
+ */
-+ memcpy(tx_ring, tx_old, sizeof(struct e1000_ring));
-+
-+ rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
-+ if (!rx_ring)
-+ goto err_alloc_rx;
-+ memcpy(rx_ring, rx_old, sizeof(struct e1000_ring));
-+
-+ adapter->tx_ring = tx_ring;
-+ adapter->rx_ring = rx_ring;
-+
-+ rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD);
-+ rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD));
-+ rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
++ ctrl |= E1000_CTRL_SLU;
++ ew32(CTRL, ctrl);
+
-+ tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD);
-+ tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD));
-+ tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
++ /* disable autoneg */
++ ctrl = er32(TXCW);
++ ctrl &= ~(1 << 31);
++ ew32(TXCW, ctrl);
+
-+ if (netif_running(adapter->netdev)) {
-+ /* Try to get new resources before deleting old */
-+ err = e1000_setup_rx_resources(adapter);
-+ if (err)
-+ goto err_setup_rx;
-+ err = e1000_setup_tx_resources(adapter);
-+ if (err)
-+ goto err_setup_tx;
++ link = (er32(STATUS) & E1000_STATUS_LU);
+
-+ /*
-+ * restore the old in order to free it,
-+ * then add in the new
-+ */
-+ adapter->rx_ring = rx_old;
-+ adapter->tx_ring = tx_old;
-+ e1000_free_rx_resources(adapter);
-+ e1000_free_tx_resources(adapter);
-+ kfree(tx_old);
-+ kfree(rx_old);
-+ adapter->rx_ring = rx_ring;
-+ adapter->tx_ring = tx_ring;
-+ err = e1000_up(adapter);
-+ if (err)
-+ goto err_setup;
++ if (!link) {
++ /* set invert loss of signal */
++ ctrl = er32(CTRL);
++ ctrl |= E1000_CTRL_ILOS;
++ ew32(CTRL, ctrl);
+ }
+
-+ clear_bit(__E1000_RESETTING, &adapter->state);
-+ return 0;
-+err_setup_tx:
-+ e1000_free_rx_resources(adapter);
-+err_setup_rx:
-+ adapter->rx_ring = rx_old;
-+ adapter->tx_ring = tx_old;
-+ kfree(rx_ring);
-+err_alloc_rx:
-+ kfree(tx_ring);
-+err_alloc_tx:
-+ e1000_up(adapter);
-+err_setup:
-+ clear_bit(__E1000_RESETTING, &adapter->state);
-+ return err;
-+}
-+
-+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
-+ int reg, int offset, u32 mask, u32 write)
-+{
-+ u32 pat, val;
-+ static const u32 test[] =
-+ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
-+ for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
-+ E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
-+ (test[pat] & write));
-+ val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
-+ if (val != (test[pat] & write & mask)) {
-+ e_err("pattern test reg %04X failed: got "
-+ "0x%08X expected 0x%08X\n",
-+ reg + offset,
-+ val, (test[pat] & write & mask));
-+ *data = reg;
-+ return 1;
-+ }
-+ }
-+ return 0;
-+}
++ /*
++ * special write to serdes control register to enable SerDes analog
++ * loopback
++ */
++#define E1000_SERDES_LB_ON 0x410
++ ew32(SCTL, E1000_SERDES_LB_ON);
++ msleep(10);
+
-+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
-+ int reg, u32 mask, u32 write)
-+{
-+ u32 val;
-+ __ew32(&adapter->hw, reg, write & mask);
-+ val = __er32(&adapter->hw, reg);
-+ if ((write & mask) != (val & mask)) {
-+ e_err("set/check reg %04X test failed: got 0x%08X"
-+ "expected 0x%08X\n", reg, (val & mask), (write & mask));
-+ *data = reg;
-+ return 1;
-+ }
+ return 0;
+}
-+#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
-+ do { \
-+ if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
-+ return 1; \
-+ } while (0)
-+#define REG_PATTERN_TEST(reg, mask, write) \
-+ REG_PATTERN_TEST_ARRAY(reg, 0, mask, write)
-+
-+#define REG_SET_AND_CHECK(reg, mask, write) \
-+ do { \
-+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
-+ return 1; \
-+ } while (0)
+
-+static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
++/* only call this for fiber/serdes connections to es2lan */
++static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
-+ struct e1000_mac_info *mac = &adapter->hw.mac;
-+ u32 value;
-+ u32 before;
-+ u32 after;
-+ u32 i;
-+ u32 toggle;
++ u32 ctrlext = er32(CTRL_EXT);
++ u32 ctrl = er32(CTRL);
+
+ /*
-+ * The status register is Read Only, so a write should fail.
-+ * Some bits that get toggled are ignored.
++ * save CTRL_EXT to restore later, reuse an empty variable (unused
++ * on mac_type 80003es2lan)
+ */
-+ switch (mac->type) {
-+ /* there are several bits on newer hardware that are r/w */
-+ case e1000_82571:
-+ case e1000_82572:
-+ case e1000_80003es2lan:
-+ toggle = 0x7FFFF3FF;
-+ break;
-+ case e1000_82573:
-+ case e1000_82574:
-+ case e1000_ich8lan:
-+ case e1000_ich9lan:
-+ case e1000_ich10lan:
-+ toggle = 0x7FFFF033;
-+ break;
-+ default:
-+ toggle = 0xFFFFF833;
-+ break;
-+ }
-+
-+ before = er32(STATUS);
-+ value = (er32(STATUS) & toggle);
-+ ew32(STATUS, toggle);
-+ after = er32(STATUS) & toggle;
-+ if (value != after) {
-+ e_err("failed STATUS register test got: "
-+ "0x%08X expected: 0x%08X\n", after, value);
-+ *data = 1;
-+ return 1;
-+ }
-+ /* restore previous status */
-+ ew32(STATUS, before);
-+
-+ if (!(adapter->flags & FLAG_IS_ICH)) {
-+ REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
-+ REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF);
-+ REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF);
-+ REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF);
-+ }
-+
-+ REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF);
-+ REG_PATTERN_TEST(E1000_RDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF);
-+ REG_PATTERN_TEST(E1000_RDLEN(0), 0x000FFF80, 0x000FFFFF);
-+ REG_PATTERN_TEST(E1000_RDH(0), 0x0000FFFF, 0x0000FFFF);
-+ REG_PATTERN_TEST(E1000_RDT(0), 0x0000FFFF, 0x0000FFFF);
-+ REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8);
-+ REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF);
-+ REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
-+ REG_PATTERN_TEST(E1000_TDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF);
-+ REG_PATTERN_TEST(E1000_TDLEN(0), 0x000FFF80, 0x000FFFFF);
++ adapter->tx_fifo_head = ctrlext;
+
-+ REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
++ /* clear the serdes mode bits, putting the device into mac loopback */
++ ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
++ ew32(CTRL_EXT, ctrlext);
+
-+ before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE);
-+ REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB);
-+ REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
++ /* force speed to 1000/FD, link up */
++ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
++ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX |
++ E1000_CTRL_SPD_1000 | E1000_CTRL_FD);
++ ew32(CTRL, ctrl);
+
-+ REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
-+ REG_PATTERN_TEST(E1000_RDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF);
-+ if (!(adapter->flags & FLAG_IS_ICH))
-+ REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
-+ REG_PATTERN_TEST(E1000_TDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF);
-+ REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
-+ for (i = 0; i < mac->rar_entry_count; i++)
-+ REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
-+ ((mac->type == e1000_ich10lan) ?
-+ 0x8007FFFF : 0x8003FFFF),
-+ 0xFFFFFFFF);
++ /* set mac loopback */
++ ctrl = er32(RCTL);
++ ctrl |= E1000_RCTL_LBM_MAC;
++ ew32(RCTL, ctrl);
+
-+ for (i = 0; i < mac->mta_reg_count; i++)
-+ REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
++ /* set testing mode parameters (no need to reset later) */
++#define KMRNCTRLSTA_OPMODE (0x1F << 16)
++#define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582
++ ew32(KMRNCTRLSTA,
++ (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
+
-+ *data = 0;
+ return 0;
+}
+
-+static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
++static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
-+ u16 temp;
-+ u16 checksum = 0;
-+ u16 i;
++ u32 rctl;
+
-+ *data = 0;
-+ /* Read and add up the contents of the EEPROM */
-+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
-+ if ((hw->nvm.ops.read(&adapter->hw, i, 1, &temp)) < 0) {
-+ *data = 1;
++ if (hw->phy.media_type == e1000_media_type_fiber ||
++ hw->phy.media_type == e1000_media_type_internal_serdes) {
++ switch (hw->mac.type) {
++ case e1000_80003es2lan:
++ return e1000_set_es2lan_mac_loopback(adapter);
++ break;
++ case e1000_82571:
++ case e1000_82572:
++ return e1000_set_82571_fiber_loopback(adapter);
+ break;
++ default:
++ rctl = er32(RCTL);
++ rctl |= E1000_RCTL_LBM_TCVR;
++ ew32(RCTL, rctl);
++ return 0;
+ }
-+ checksum += temp;
++ } else if (hw->phy.media_type == e1000_media_type_copper) {
++ return e1000_integrated_phy_loopback(adapter);
+ }
+
-+ /* If Checksum is not Correct return error else test passed */
-+ if ((checksum != (u16) NVM_SUM) && !(*data))
-+ *data = 2;
-+
-+ return *data;
++ return 7;
+}
+
-+static irqreturn_t e1000_test_intr(int irq, void *data)
++static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
+{
-+ struct net_device *netdev = (struct net_device *) data;
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
++ u32 rctl;
++ u16 phy_reg;
+
-+ adapter->test_icr |= er32(ICR);
++ rctl = er32(RCTL);
++ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
++ ew32(RCTL, rctl);
+
-+ return IRQ_HANDLED;
++ switch (hw->mac.type) {
++ case e1000_80003es2lan:
++ if (hw->phy.media_type == e1000_media_type_fiber ||
++ hw->phy.media_type == e1000_media_type_internal_serdes) {
++ /* restore CTRL_EXT, stealing space from tx_fifo_head */
++ ew32(CTRL_EXT, adapter->tx_fifo_head);
++ adapter->tx_fifo_head = 0;
++ }
++ /* fall through */
++ case e1000_82571:
++ case e1000_82572:
++ if (hw->phy.media_type == e1000_media_type_fiber ||
++ hw->phy.media_type == e1000_media_type_internal_serdes) {
++#define E1000_SERDES_LB_OFF 0x400
++ ew32(SCTL, E1000_SERDES_LB_OFF);
++ msleep(10);
++ break;
++ }
++ /* Fall Through */
++ default:
++ hw->mac.autoneg = 1;
++ if (hw->phy.type == e1000_phy_gg82563)
++ e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180);
++ e1e_rphy(hw, PHY_CONTROL, &phy_reg);
++ if (phy_reg & MII_CR_LOOPBACK) {
++ phy_reg &= ~MII_CR_LOOPBACK;
++ e1e_wphy(hw, PHY_CONTROL, phy_reg);
++ e1000e_commit_phy(hw);
++ }
++ break;
++ }
+}
+
-+static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
++static void e1000_create_lbtest_frame(struct sk_buff *skb,
++ unsigned int frame_size)
+{
-+ struct net_device *netdev = adapter->netdev;
-+ struct e1000_hw *hw = &adapter->hw;
-+ u32 mask;
-+ u32 shared_int = 1;
-+ u32 irq = adapter->pdev->irq;
-+ int i;
-+#ifdef CONFIG_E1000E_MSIX
-+ int ret_val = 0;
-+ int int_mode = E1000E_INT_MODE_LEGACY;
-+#endif
-+
-+ *data = 0;
-+
-+ /* NOTE: we don't test MSI/MSI-X interrupts here, yet */
-+#ifdef CONFIG_E1000E_MSIX
-+ if (adapter->int_mode == E1000E_INT_MODE_MSIX) {
-+ int_mode = adapter->int_mode;
-+ e1000_reset_interrupt_capability(adapter);
-+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
-+ e1000_set_interrupt_capability(adapter);
-+ }
-+#endif
-+ /* Hook up test interrupt handler just for this test */
-+ if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
-+ netdev)) {
-+ shared_int = 0;
-+ } else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
-+ netdev->name, netdev)) {
-+ *data = 1;
-+#ifdef CONFIG_E1000E_MSIX
-+ ret_val = -1;
-+ goto out;
-+#else
-+ return -1;
-+#endif
-+ }
-+ e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
-+
-+ /* Disable all the interrupts */
-+ ew32(IMC, 0xFFFFFFFF);
-+ msleep(10);
++ memset(skb->data, 0xFF, frame_size);
++ frame_size &= ~1;
++ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
++ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
++ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
++}
+
-+ /* Test each interrupt */
-+ for (i = 0; i < 10; i++) {
-+ /* Interrupt to test */
-+ mask = 1 << i;
++static int e1000_check_lbtest_frame(struct sk_buff *skb,
++ unsigned int frame_size)
++{
++ frame_size &= ~1;
++ if (*(skb->data + 3) == 0xFF)
++ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
++ (*(skb->data + frame_size / 2 + 12) == 0xAF))
++ return 0;
++ return 13;
++}
+
-+ if (adapter->flags & FLAG_IS_ICH) {
-+ switch (mask) {
-+ case E1000_ICR_RXSEQ:
-+ continue;
-+ case 0x00000100:
-+ if (adapter->hw.mac.type == e1000_ich8lan ||
-+ adapter->hw.mac.type == e1000_ich9lan)
-+ continue;
-+ break;
-+ default:
-+ break;
-+ }
-+ }
++static int e1000_run_loopback_test(struct e1000_adapter *adapter)
++{
++ struct e1000_ring *tx_ring = &adapter->test_tx_ring;
++ struct e1000_ring *rx_ring = &adapter->test_rx_ring;
++ struct pci_dev *pdev = adapter->pdev;
++ struct e1000_hw *hw = &adapter->hw;
++ int i, j, k, l;
++ int lc;
++ int good_cnt;
++ int ret_val = 0;
++ unsigned long time;
+
-+ if (!shared_int) {
-+ /*
-+ * Disable the interrupt to be reported in
-+ * the cause register and then force the same
-+ * interrupt and see if one gets posted. If
-+ * an interrupt was posted to the bus, the
-+ * test failed.
-+ */
-+ adapter->test_icr = 0;
-+ ew32(IMC, mask);
-+ ew32(ICS, mask);
-+ msleep(10);
++ ew32(RDT(0), rx_ring->count - 1);
+
-+ if (adapter->test_icr & mask) {
-+ *data = 3;
-+ break;
-+ }
-+ }
++ /*
++ * Calculate the loop count based on the largest descriptor ring
++ * The idea is to wrap the largest ring a number of times using 64
++ * send/receive pairs during each loop
++ */
+
-+ /*
-+ * Enable the interrupt to be reported in
-+ * the cause register and then force the same
-+ * interrupt and see if one gets posted. If
-+ * an interrupt was not posted to the bus, the
-+ * test failed.
-+ */
-+ adapter->test_icr = 0;
-+ ew32(IMS, mask);
-+ ew32(ICS, mask);
-+ msleep(10);
++ if (rx_ring->count <= tx_ring->count)
++ lc = ((tx_ring->count / 64) * 2) + 1;
++ else
++ lc = ((rx_ring->count / 64) * 2) + 1;
+
-+ if (!(adapter->test_icr & mask)) {
-+ *data = 4;
-+ break;
++ k = 0;
++ l = 0;
++ for (j = 0; j <= lc; j++) { /* loop count loop */
++ for (i = 0; i < 64; i++) { /* send the packets */
++ e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
++ 1024);
++ pci_dma_sync_single_for_device(pdev,
++ tx_ring->buffer_info[k].dma,
++ tx_ring->buffer_info[k].length,
++ PCI_DMA_TODEVICE);
++ k++;
++ if (k == tx_ring->count)
++ k = 0;
+ }
++ ew32(TDT(0), k);
++ msleep(200);
++ time = jiffies; /* set the start time for the receive */
++ good_cnt = 0;
++ do { /* receive the sent packets */
++ pci_dma_sync_single_for_cpu(pdev,
++ rx_ring->buffer_info[l].dma, 2048,
++ PCI_DMA_FROMDEVICE);
+
-+ if (!shared_int) {
++ ret_val = e1000_check_lbtest_frame(
++ rx_ring->buffer_info[l].skb, 1024);
++ if (!ret_val)
++ good_cnt++;
++ l++;
++ if (l == rx_ring->count)
++ l = 0;
+ /*
-+ * Disable the other interrupts to be reported in
-+ * the cause register and then force the other
-+ * interrupts and see if any get posted. If
-+ * an interrupt was posted to the bus, the
-+ * test failed.
++ * time + 20 msecs (200 msecs on 2.4) is more than
++ * enough time to complete the receives, if it's
++ * exceeded, break and error off
+ */
-+ adapter->test_icr = 0;
-+ ew32(IMC, ~mask & 0x00007FFF);
-+ ew32(ICS, ~mask & 0x00007FFF);
-+ msleep(10);
-+
-+ if (adapter->test_icr) {
-+ *data = 5;
-+ break;
-+ }
++ } while ((good_cnt < 64) && !time_after(jiffies, time + 20));
++ if (good_cnt != 64) {
++ ret_val = 13; /* ret_val is the same as mis-compare */
++ break;
+ }
-+ }
-+
-+ /* Disable all the interrupts */
-+ ew32(IMC, 0xFFFFFFFF);
-+ msleep(10);
-+
-+ /* Unhook test interrupt handler */
-+ free_irq(irq, netdev);
-+
-+#ifdef CONFIG_E1000E_MSIX
-+out:
-+ if (int_mode == E1000E_INT_MODE_MSIX) {
-+ e1000_reset_interrupt_capability(adapter);
-+ adapter->int_mode = int_mode;
-+ e1000_set_interrupt_capability(adapter);
-+ }
-+
++ if (jiffies >= (time + 20)) {
++ ret_val = 14; /* error code for time out error */
++ break;
++ }
++ } /* end loop count loop */
+ return ret_val;
-+#else
-+ return *data;
-+#endif
+}
+
-+static void e1000_free_desc_rings(struct e1000_adapter *adapter)
++static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
+{
-+ struct e1000_ring *tx_ring = &adapter->test_tx_ring;
-+ struct e1000_ring *rx_ring = &adapter->test_rx_ring;
-+ struct pci_dev *pdev = adapter->pdev;
-+ int i;
-+
-+ if (tx_ring->desc && tx_ring->buffer_info) {
-+ for (i = 0; i < tx_ring->count; i++) {
-+ if (tx_ring->buffer_info[i].dma)
-+ pci_unmap_single(pdev,
-+ tx_ring->buffer_info[i].dma,
-+ tx_ring->buffer_info[i].length,
-+ PCI_DMA_TODEVICE);
-+ if (tx_ring->buffer_info[i].skb)
-+ dev_kfree_skb(tx_ring->buffer_info[i].skb);
-+ }
++ /*
++ * PHY loopback cannot be performed if SoL/IDER
++ * sessions are active
++ */
++ if (e1000_check_reset_block(&adapter->hw)) {
++ e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
++ *data = 0;
++ goto out;
+ }
+
-+ if (rx_ring->desc && rx_ring->buffer_info) {
-+ for (i = 0; i < rx_ring->count; i++) {
-+ if (rx_ring->buffer_info[i].dma)
-+ pci_unmap_single(pdev,
-+ rx_ring->buffer_info[i].dma,
-+ 2048, PCI_DMA_FROMDEVICE);
-+ if (rx_ring->buffer_info[i].skb)
-+ dev_kfree_skb(rx_ring->buffer_info[i].skb);
-+ }
-+ }
++ *data = e1000_setup_desc_rings(adapter);
++ if (*data)
++ goto out;
+
-+ if (tx_ring->desc) {
-+ dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
-+ tx_ring->dma);
-+ tx_ring->desc = NULL;
-+ }
-+ if (rx_ring->desc) {
-+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
-+ rx_ring->dma);
-+ rx_ring->desc = NULL;
-+ }
++ *data = e1000_setup_loopback_test(adapter);
++ if (*data)
++ goto err_loopback;
+
-+ kfree(tx_ring->buffer_info);
-+ tx_ring->buffer_info = NULL;
-+ kfree(rx_ring->buffer_info);
-+ rx_ring->buffer_info = NULL;
++ *data = e1000_run_loopback_test(adapter);
++ e1000_loopback_cleanup(adapter);
++
++err_loopback:
++ e1000_free_desc_rings(adapter);
++out:
++ return *data;
+}
+
-+static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
++static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
+{
-+ struct e1000_ring *tx_ring = &adapter->test_tx_ring;
-+ struct e1000_ring *rx_ring = &adapter->test_rx_ring;
-+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
-+ u32 rctl;
-+ int i;
-+ int ret_val;
+
-+ /* Setup Tx descriptor ring and Tx buffers */
++ *data = 0;
++ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
++ int i = 0;
++ hw->mac.serdes_has_link = 0;
+
-+ if (!tx_ring->count)
-+ tx_ring->count = E1000_DEFAULT_TXD;
++ /*
++ * On some blade server designs, link establishment
++ * could take as long as 2-3 minutes
++ */
++ do {
++ hw->mac.ops.check_for_link(hw);
++ if (hw->mac.serdes_has_link)
++ return *data;
++ msleep(20);
++ } while (i++ < 3750);
+
-+ if (!(tx_ring->buffer_info = kcalloc(tx_ring->count,
-+ sizeof(struct e1000_buffer),
-+ GFP_KERNEL))) {
-+ ret_val = 1;
-+ goto err_nomem;
-+ }
++ *data = 1;
++ } else {
++ hw->mac.ops.check_for_link(hw);
++ if (hw->mac.autoneg)
++ msleep(4000);
+
-+ tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
-+ tx_ring->size = ALIGN(tx_ring->size, 4096);
-+ tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
-+ &tx_ring->dma, GFP_KERNEL);
-+ if (!tx_ring->desc) {
-+ ret_val = 2;
-+ goto err_nomem;
++ if (!(er32(STATUS) &
++ E1000_STATUS_LU))
++ *data = 1;
+ }
-+ tx_ring->next_to_use = 0;
-+ tx_ring->next_to_clean = 0;
++ return *data;
++}
+
-+ ew32(TDBAL(0), ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
-+ ew32(TDBAH(0), ((u64) tx_ring->dma >> 32));
-+ ew32(TDLEN(0), tx_ring->count * sizeof(struct e1000_tx_desc));
-+ ew32(TDH(0), 0);
-+ ew32(TDT(0), 0);
-+ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR |
-+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
-+ E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
++static int e1000_get_self_test_count(struct net_device *netdev)
++{
++ return E1000_TEST_LEN;
++}
+
-+ for (i = 0; i < tx_ring->count; i++) {
-+ struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
-+ struct sk_buff *skb;
-+ unsigned int skb_size = 1024;
++static int e1000_get_stats_count(struct net_device *netdev)
++{
++ return E1000_STATS_LEN;
++}
+
-+ skb = alloc_skb(skb_size, GFP_KERNEL);
-+ if (!skb) {
-+ ret_val = 3;
-+ goto err_nomem;
-+ }
-+ skb_put(skb, skb_size);
-+ tx_ring->buffer_info[i].skb = skb;
-+ tx_ring->buffer_info[i].length = skb->len;
-+ tx_ring->buffer_info[i].dma =
-+ pci_map_single(pdev, skb->data, skb->len,
-+ PCI_DMA_TODEVICE);
-+ if (pci_dma_mapping_error(pdev, tx_ring->buffer_info[i].dma)) {
-+ ret_val = 4;
-+ goto err_nomem;
-+ }
-+ tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma);
-+ tx_desc->lower.data = cpu_to_le32(skb->len);
-+ tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
-+ E1000_TXD_CMD_IFCS |
-+ E1000_TXD_CMD_RS);
-+ tx_desc->upper.data = 0;
-+ }
++static void e1000_diag_test(struct net_device *netdev,
++ struct ethtool_test *eth_test, u64 *data)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ u16 autoneg_advertised;
++ u8 forced_speed_duplex;
++ u8 autoneg;
++ bool if_running = netif_running(netdev);
+
-+ /* Setup Rx descriptor ring and Rx buffers */
++ set_bit(__E1000_TESTING, &adapter->state);
++ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
++ /* Offline tests */
+
-+ if (!rx_ring->count)
-+ rx_ring->count = E1000_DEFAULT_RXD;
++ /* save speed, duplex, autoneg settings */
++ autoneg_advertised = adapter->hw.phy.autoneg_advertised;
++ forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
++ autoneg = adapter->hw.mac.autoneg;
+
-+ if (!(rx_ring->buffer_info = kcalloc(rx_ring->count,
-+ sizeof(struct e1000_buffer),
-+ GFP_KERNEL))) {
-+ ret_val = 5;
-+ goto err_nomem;
-+ }
++ e_info("offline testing starting\n");
+
-+ rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
-+ rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
-+ &rx_ring->dma, GFP_KERNEL);
-+ if (!rx_ring->desc) {
-+ ret_val = 6;
-+ goto err_nomem;
-+ }
-+ rx_ring->next_to_use = 0;
-+ rx_ring->next_to_clean = 0;
++ /*
++ * Link test performed before hardware reset so autoneg doesn't
++ * interfere with test result
++ */
++ if (e1000_link_test(adapter, &data[4]))
++ eth_test->flags |= ETH_TEST_FL_FAILED;
+
-+ rctl = er32(RCTL);
-+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
-+ ew32(RDBAL(0), ((u64) rx_ring->dma & 0xFFFFFFFF));
-+ ew32(RDBAH(0), ((u64) rx_ring->dma >> 32));
-+ ew32(RDLEN(0), rx_ring->size);
-+ ew32(RDH(0), 0);
-+ ew32(RDT(0), 0);
-+ rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
-+ E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
-+ E1000_RCTL_SBP | E1000_RCTL_SECRC |
-+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
-+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
-+ ew32(RCTL, rctl);
++ if (if_running)
++ /* indicate we're in test mode */
++ dev_close(netdev);
++ else
++ e1000e_reset(adapter);
+
-+ for (i = 0; i < rx_ring->count; i++) {
-+ struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
-+ struct sk_buff *skb;
++ if (e1000_reg_test(adapter, &data[0]))
++ eth_test->flags |= ETH_TEST_FL_FAILED;
+
-+ skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL);
-+ if (!skb) {
-+ ret_val = 7;
-+ goto err_nomem;
-+ }
-+ skb_reserve(skb, NET_IP_ALIGN);
-+ rx_ring->buffer_info[i].skb = skb;
-+ rx_ring->buffer_info[i].dma =
-+ pci_map_single(pdev, skb->data, 2048,
-+ PCI_DMA_FROMDEVICE);
-+ if (pci_dma_mapping_error(pdev, rx_ring->buffer_info[i].dma)) {
-+ ret_val = 8;
-+ goto err_nomem;
-+ }
-+ rx_desc->buffer_addr =
-+ cpu_to_le64(rx_ring->buffer_info[i].dma);
-+ memset(skb->data, 0x00, skb->len);
-+ }
++ e1000e_reset(adapter);
++ if (e1000_eeprom_test(adapter, &data[1]))
++ eth_test->flags |= ETH_TEST_FL_FAILED;
++
++ e1000e_reset(adapter);
++ if (e1000_intr_test(adapter, &data[2]))
++ eth_test->flags |= ETH_TEST_FL_FAILED;
+
-+ return 0;
++ e1000e_reset(adapter);
++ /* make sure the phy is powered up */
++ e1000e_power_up_phy(adapter);
++ if (e1000_loopback_test(adapter, &data[3]))
++ eth_test->flags |= ETH_TEST_FL_FAILED;
+
-+err_nomem:
-+ e1000_free_desc_rings(adapter);
-+ return ret_val;
-+}
++ /* restore speed, duplex, autoneg settings */
++ adapter->hw.phy.autoneg_advertised = autoneg_advertised;
++ adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
++ adapter->hw.mac.autoneg = autoneg;
+
-+static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
-+{
-+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
-+ adapter->hw.phy.ops.write_reg(&adapter->hw, 29, 0x001F);
-+ adapter->hw.phy.ops.write_reg(&adapter->hw, 30, 0x8FFC);
-+ adapter->hw.phy.ops.write_reg(&adapter->hw, 29, 0x001A);
-+ adapter->hw.phy.ops.write_reg(&adapter->hw, 30, 0x8FF0);
++ /* force this routine to wait until autoneg complete/timeout */
++ adapter->hw.phy.autoneg_wait_to_complete = 1;
++ e1000e_reset(adapter);
++ adapter->hw.phy.autoneg_wait_to_complete = 0;
++
++ clear_bit(__E1000_TESTING, &adapter->state);
++ if (if_running)
++ dev_open(netdev);
++ } else {
++ e_info("online testing starting\n");
++ /* Online tests */
++ if (e1000_link_test(adapter, &data[4]))
++ eth_test->flags |= ETH_TEST_FL_FAILED;
++
++ /* Online tests aren't run; pass by default */
++ data[0] = 0;
++ data[1] = 0;
++ data[2] = 0;
++ data[3] = 0;
++
++ clear_bit(__E1000_TESTING, &adapter->state);
++ }
++ msleep_interruptible(4 * 1000);
+}
+
-+static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
++static void e1000_get_wol(struct net_device *netdev,
++ struct ethtool_wolinfo *wol)
+{
-+ struct e1000_hw *hw = &adapter->hw;
-+ u32 ctrl_reg = 0;
-+ u32 stat_reg = 0;
-+ u16 phy_reg = 0;
++ struct e1000_adapter *adapter = netdev_priv(netdev);
+
-+ hw->mac.autoneg = 0;
++ wol->supported = 0;
++ wol->wolopts = 0;
+
-+ if (hw->phy.type == e1000_phy_m88) {
-+ /* Auto-MDI/MDIX Off */
-+ hw->phy.ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
-+ /* reset to update Auto-MDI/MDIX */
-+ hw->phy.ops.write_reg(hw, PHY_CONTROL, 0x9140);
-+ /* autoneg off */
-+ hw->phy.ops.write_reg(hw, PHY_CONTROL, 0x8140);
-+ } else if (hw->phy.type == e1000_phy_gg82563)
-+ hw->phy.ops.write_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
++ if (!(adapter->flags & FLAG_HAS_WOL) ||
++ !device_can_wakeup(&adapter->pdev->dev))
++ return;
+
-+ ctrl_reg = er32(CTRL);
++ wol->supported = WAKE_UCAST | WAKE_MCAST |
++ WAKE_BCAST | WAKE_MAGIC |
++ WAKE_PHY | WAKE_ARP;
+
-+ switch (hw->phy.type) {
-+ case e1000_phy_ife:
-+ /* force 100, set loopback */
-+ hw->phy.ops.write_reg(hw, PHY_CONTROL, 0x6100);
++ /* apply any specific unsupported masks here */
++ if (adapter->flags & FLAG_NO_WAKE_UCAST) {
++ wol->supported &= ~WAKE_UCAST;
+
-+ /* Now set up the MAC to the same speed/duplex as the PHY. */
-+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
-+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
-+ E1000_CTRL_SPD_100 |/* Force Speed to 100 */
-+ E1000_CTRL_FD); /* Force Duplex to FULL */
-+ break;
-+ case e1000_phy_bm:
-+ /* Set Default MAC Interface speed to 1GB */
-+ hw->phy.ops.read_reg(hw, PHY_REG(2, 21), &phy_reg);
-+ phy_reg &= ~0x0007;
-+ phy_reg |= 0x006;
-+ hw->phy.ops.write_reg(hw, PHY_REG(2, 21), phy_reg);
-+ /* Assert SW reset for above settings to take effect */
-+ hw->phy.ops.commit(hw);
-+ mdelay(1);
-+ /* Force Full Duplex */
-+ hw->phy.ops.read_reg(hw, PHY_REG(769, 16), &phy_reg);
-+ hw->phy.ops.write_reg(hw, PHY_REG(769, 16), phy_reg | 0x000C);
-+ /* Set Link Up (in force link) */
-+ hw->phy.ops.read_reg(hw, PHY_REG(776, 16), &phy_reg);
-+ hw->phy.ops.write_reg(hw, PHY_REG(776, 16), phy_reg | 0x0040);
-+ /* Force Link */
-+ hw->phy.ops.read_reg(hw, PHY_REG(769, 16), &phy_reg);
-+ hw->phy.ops.write_reg(hw, PHY_REG(769, 16), phy_reg | 0x0040);
-+ /* Set Early Link Enable */
-+ hw->phy.ops.read_reg(hw, PHY_REG(769, 20), &phy_reg);
-+ hw->phy.ops.write_reg(hw, PHY_REG(769, 20), phy_reg | 0x0400);
-+ /* fall through */
-+ default:
-+ /* force 1000, set loopback */
-+ hw->phy.ops.write_reg(hw, PHY_CONTROL, 0x4140);
-+ mdelay(250);
++ if (adapter->wol & E1000_WUFC_EX)
++ e_err("Interface does not support directed (unicast) "
++ "frame wake-up packets\n");
++ }
+
-+ /* Now set up the MAC to the same speed/duplex as the PHY. */
-+ ctrl_reg = er32(CTRL);
-+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
-+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
-+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
-+ E1000_CTRL_FD); /* Force Duplex to FULL */
++ if (adapter->wol & E1000_WUFC_EX)
++ wol->wolopts |= WAKE_UCAST;
++ if (adapter->wol & E1000_WUFC_MC)
++ wol->wolopts |= WAKE_MCAST;
++ if (adapter->wol & E1000_WUFC_BC)
++ wol->wolopts |= WAKE_BCAST;
++ if (adapter->wol & E1000_WUFC_MAG)
++ wol->wolopts |= WAKE_MAGIC;
++ if (adapter->wol & E1000_WUFC_LNKC)
++ wol->wolopts |= WAKE_PHY;
++ if (adapter->wol & E1000_WUFC_ARP)
++ wol->wolopts |= WAKE_ARP;
++}
+
-+ if (adapter->flags & FLAG_IS_ICH)
-+ ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */
-+ }
++static int e1000_set_wol(struct net_device *netdev,
++ struct ethtool_wolinfo *wol)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
+
-+ if (hw->phy.media_type == e1000_media_type_copper &&
-+ hw->phy.type == e1000_phy_m88) {
-+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
-+ } else {
-+ /*
-+ * Set the ILOS bit on the fiber Nic if half duplex link is
-+ * detected.
-+ */
-+ stat_reg = er32(STATUS);
-+ if ((stat_reg & E1000_STATUS_FD) == 0)
-+ ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
-+ }
++ if (!(adapter->flags & FLAG_HAS_WOL) ||
++ !device_can_wakeup(&adapter->pdev->dev) ||
++ (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
++ WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
++ return -EOPNOTSUPP;
+
-+ ew32(CTRL, ctrl_reg);
++ /* these settings will always override what we currently have */
++ adapter->wol = 0;
+
-+ /*
-+ * Disable the receiver on the PHY so when a cable is plugged in, the
-+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
-+ */
-+ if (hw->phy.type == e1000_phy_m88)
-+ e1000_phy_disable_receiver(adapter);
++ if (wol->wolopts & WAKE_UCAST)
++ adapter->wol |= E1000_WUFC_EX;
++ if (wol->wolopts & WAKE_MCAST)
++ adapter->wol |= E1000_WUFC_MC;
++ if (wol->wolopts & WAKE_BCAST)
++ adapter->wol |= E1000_WUFC_BC;
++ if (wol->wolopts & WAKE_MAGIC)
++ adapter->wol |= E1000_WUFC_MAG;
++ if (wol->wolopts & WAKE_PHY)
++ adapter->wol |= E1000_WUFC_LNKC;
++ if (wol->wolopts & WAKE_ARP)
++ adapter->wol |= E1000_WUFC_ARP;
+
-+ udelay(500);
++ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
-+static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
-+{
-+ struct e1000_hw *hw = &adapter->hw;
-+ u32 ctrl = er32(CTRL);
-+ int link = 0;
-+
-+ /* special requirements for 82571/82572 fiber adapters */
-+
-+ /*
-+ * jump through hoops to make sure link is up because serdes
-+ * link is hardwired up
-+ */
-+ ctrl |= E1000_CTRL_SLU;
-+ ew32(CTRL, ctrl);
++/* toggle LED 4 times per second = 2 "blinks" per second */
++#define E1000_ID_INTERVAL (HZ/4)
+
-+ /* disable autoneg */
-+ ctrl = er32(TXCW);
-+ ctrl &= ~(1 << 31);
-+ ew32(TXCW, ctrl);
++/* bit defines for adapter->led_status */
++#define E1000_LED_ON 0
+
-+ link = (er32(STATUS) & E1000_STATUS_LU);
++static void e1000e_led_blink_task(struct work_struct *work)
++{
++ struct e1000_adapter *adapter = container_of(work,
++ struct e1000_adapter, led_blink_task);
+
-+ if (!link) {
-+ /* set invert loss of signal */
-+ ctrl = er32(CTRL);
-+ ctrl |= E1000_CTRL_ILOS;
-+ ew32(CTRL, ctrl);
-+ }
++ if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
++ adapter->hw.mac.ops.led_off(&adapter->hw);
++ else
++ adapter->hw.mac.ops.led_on(&adapter->hw);
++}
+
-+ /*
-+ * special write to serdes control register to enable SerDes analog
-+ * loopback
-+ */
-+#define E1000_SERDES_LB_ON 0x410
-+ ew32(SCTL, E1000_SERDES_LB_ON);
-+ msleep(10);
++static void e1000_led_blink_callback(unsigned long data)
++{
++ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+
-+ return 0;
++ schedule_work(&adapter->led_blink_task);
++ mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
+}
+
-+/* only call this for fiber/serdes connections to es2lan */
-+static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
++static int e1000_phys_id(struct net_device *netdev, u32 data)
+{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
-+ u32 ctrlext = er32(CTRL_EXT);
-+ u32 ctrl = er32(CTRL);
+
-+ /*
-+ * save CTRL_EXT to restore later, reuse an empty variable (unused
-+ * on mac_type 80003es2lan)
-+ */
-+ adapter->tx_fifo_head = ctrlext;
++ if (!data)
++ data = INT_MAX;
+
-+ /* clear the serdes mode bits, putting the device into mac loopback */
-+ ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
-+ ew32(CTRL_EXT, ctrlext);
++ if ((hw->phy.type == e1000_phy_ife) ||
++ (hw->mac.type == e1000_pchlan) ||
++ (hw->mac.type == e1000_82583) ||
++ (hw->mac.type == e1000_82574)) {
++ INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
++ if (!adapter->blink_timer.function) {
++ init_timer(&adapter->blink_timer);
++ adapter->blink_timer.function =
++ e1000_led_blink_callback;
++ adapter->blink_timer.data = (unsigned long) adapter;
++ }
++ mod_timer(&adapter->blink_timer, jiffies);
++ msleep_interruptible(data * 1000);
++ del_timer_sync(&adapter->blink_timer);
++ if (hw->phy.type == e1000_phy_ife)
++ e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
++ } else {
++ e1000e_blink_led(hw);
++ msleep_interruptible(data * 1000);
++ }
+
-+ /* force speed to 1000/FD, link up */
-+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
-+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX |
-+ E1000_CTRL_SPD_1000 | E1000_CTRL_FD);
-+ ew32(CTRL, ctrl);
++ hw->mac.ops.led_off(hw);
++ clear_bit(E1000_LED_ON, &adapter->led_status);
++ hw->mac.ops.cleanup_led(hw);
+
-+ /* set mac loopback */
-+ ctrl = er32(RCTL);
-+ ctrl |= E1000_RCTL_LBM_MAC;
-+ ew32(RCTL, ctrl);
++ return 0;
++}
+
-+ /* set testing mode parameters (no need to reset later) */
-+#define KMRNCTRLSTA_OPMODE (0x1F << 16)
-+#define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582
-+ ew32(KMRNCTRLSTA,
-+ (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
++static int e1000_get_coalesce(struct net_device *netdev,
++ struct ethtool_coalesce *ec)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++
++ if (adapter->itr_setting <= 3)
++ ec->rx_coalesce_usecs = adapter->itr_setting;
++ else
++ ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
+
+ return 0;
+}
+
-+static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
++static int e1000_set_coalesce(struct net_device *netdev,
++ struct ethtool_coalesce *ec)
+{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
-+ u32 rctl;
+
-+ if (hw->phy.media_type == e1000_media_type_fiber ||
-+ hw->phy.media_type == e1000_media_type_internal_serdes) {
-+ switch (hw->mac.type) {
-+ case e1000_80003es2lan:
-+ return e1000_set_es2lan_mac_loopback(adapter);
-+ break;
-+ case e1000_82571:
-+ case e1000_82572:
-+ return e1000_set_82571_fiber_loopback(adapter);
-+ break;
-+ default:
-+ rctl = er32(RCTL);
-+ rctl |= E1000_RCTL_LBM_TCVR;
-+ ew32(RCTL, rctl);
-+ return 0;
-+ }
-+ } else if (hw->phy.media_type == e1000_media_type_copper) {
-+ return e1000_integrated_phy_loopback(adapter);
++ if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
++ ((ec->rx_coalesce_usecs > 3) &&
++ (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
++ (ec->rx_coalesce_usecs == 2))
++ return -EINVAL;
++
++ if (ec->rx_coalesce_usecs <= 3) {
++ adapter->itr = 20000;
++ adapter->itr_setting = ec->rx_coalesce_usecs;
++ } else {
++ adapter->itr = (1000000 / ec->rx_coalesce_usecs);
++ adapter->itr_setting = adapter->itr & ~3;
+ }
+
-+ return 7;
++ if (adapter->itr_setting != 0)
++ ew32(ITR, 1000000000 / (adapter->itr * 256));
++ else
++ ew32(ITR, 0);
++
++ return 0;
+}
+
-+static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
++static int e1000_nway_reset(struct net_device *netdev)
+{
-+ struct e1000_hw *hw = &adapter->hw;
-+ u32 rctl;
-+ u16 phy_reg;
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ if (netif_running(netdev))
++ e1000e_reinit_locked(adapter);
++ return 0;
++}
+
-+ rctl = er32(RCTL);
-+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
-+ ew32(RCTL, rctl);
++static void e1000_get_ethtool_stats(struct net_device *netdev,
++ struct ethtool_stats *stats,
++ u64 *data)
++{
++ struct e1000_adapter *adapter = netdev_priv(netdev);
++ int i;
+
-+ switch (hw->mac.type) {
-+ case e1000_80003es2lan:
-+ if (hw->phy.media_type == e1000_media_type_fiber ||
-+ hw->phy.media_type == e1000_media_type_internal_serdes) {
-+ /* restore CTRL_EXT, stealing space from tx_fifo_head */
-+ ew32(CTRL_EXT, adapter->tx_fifo_head);
-+ adapter->tx_fifo_head = 0;
-+ }
-+ /* fall through */
-+ case e1000_82571:
-+ case e1000_82572:
-+ if (hw->phy.media_type == e1000_media_type_fiber ||
-+ hw->phy.media_type == e1000_media_type_internal_serdes) {
-+#define E1000_SERDES_LB_OFF 0x400
-+ ew32(SCTL, E1000_SERDES_LB_OFF);
-+ msleep(10);
-+ break;
-+ }
-+ /* Fall Through */
-+ default:
-+ hw->mac.autoneg = 1;
-+ if (hw->phy.type == e1000_phy_gg82563)
-+ hw->phy.ops.write_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
-+ 0x180);
-+ if(hw->phy.ops.read_reg)
-+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_reg);
-+ if (phy_reg & MII_CR_LOOPBACK) {
-+ phy_reg &= ~MII_CR_LOOPBACK;
-+ hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_reg);
-+ if (hw->phy.ops.commit)
-+ hw->phy.ops.commit(hw);
-+ }
-+ break;
++ e1000e_update_stats(adapter);
++ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
++ char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
++ data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
++ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+}
+
-+static void e1000_create_lbtest_frame(struct sk_buff *skb,
-+ unsigned int frame_size)
++static void e1000_get_strings(struct net_device *netdev, u32 stringset,
++ u8 *data)
+{
-+ memset(skb->data, 0xFF, frame_size);
-+ frame_size &= ~1;
-+ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
-+ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
-+ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
-+}
++ u8 *p = data;
++ int i;
+
-+static int e1000_check_lbtest_frame(struct sk_buff *skb,
-+ unsigned int frame_size)
-+{
-+ frame_size &= ~1;
-+ if (*(skb->data + 3) == 0xFF)
-+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
-+ (*(skb->data + frame_size / 2 + 12) == 0xAF))
-+ return 0;
-+ return 13;
++ switch (stringset) {
++ case ETH_SS_TEST:
++ memcpy(data, *e1000_gstrings_test, sizeof(e1000_gstrings_test));
++ break;
++ case ETH_SS_STATS:
++ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
++ memcpy(p, e1000_gstrings_stats[i].stat_string,
++ ETH_GSTRING_LEN);
++ p += ETH_GSTRING_LEN;
++ }
++ break;
++ }
+}
+
-+static int e1000_run_loopback_test(struct e1000_adapter *adapter)
-+{
-+ struct e1000_ring *tx_ring = &adapter->test_tx_ring;
-+ struct e1000_ring *rx_ring = &adapter->test_rx_ring;
-+ struct pci_dev *pdev = adapter->pdev;
-+ struct e1000_hw *hw = &adapter->hw;
-+ int i, j, k, l;
-+ int lc;
-+ int good_cnt;
-+ int ret_val = 0;
-+ unsigned long time;
-+
-+ ew32(RDT(0), rx_ring->count - 1);
++static const struct ethtool_ops e1000_ethtool_ops = {
++ .get_settings = e1000_get_settings,
++ .set_settings = e1000_set_settings,
++ .get_drvinfo = e1000_get_drvinfo,
++ .get_regs_len = e1000_get_regs_len,
++ .get_regs = e1000_get_regs,
++ .get_wol = e1000_get_wol,
++ .set_wol = e1000_set_wol,
++ .get_msglevel = e1000_get_msglevel,
++ .set_msglevel = e1000_set_msglevel,
++ .nway_reset = e1000_nway_reset,
++ .get_link = e1000_get_link,
++ .get_eeprom_len = e1000_get_eeprom_len,
++ .get_eeprom = e1000_get_eeprom,
++ .set_eeprom = e1000_set_eeprom,
++ .get_ringparam = e1000_get_ringparam,
++ .set_ringparam = e1000_set_ringparam,
++ .get_pauseparam = e1000_get_pauseparam,
++ .set_pauseparam = e1000_set_pauseparam,
++ .get_rx_csum = e1000_get_rx_csum,
++ .set_rx_csum = e1000_set_rx_csum,
++ .get_tx_csum = e1000_get_tx_csum,
++ .set_tx_csum = e1000_set_tx_csum,
++ .get_sg = ethtool_op_get_sg,
++ .set_sg = ethtool_op_set_sg,
++#ifdef NETIF_F_TSO
++ .get_tso = ethtool_op_get_tso,
++ .set_tso = e1000_set_tso,
++#endif
++ .self_test = e1000_diag_test,
++ .get_strings = e1000_get_strings,
++ .phys_id = e1000_phys_id,
++ .get_ethtool_stats = e1000_get_ethtool_stats,
++ .self_test_count = e1000_get_self_test_count,
++ .get_stats_count = e1000_get_stats_count,
++ .get_coalesce = e1000_get_coalesce,
++ .set_coalesce = e1000_set_coalesce,
++#ifdef NETIF_F_LRO
++ .get_flags = ethtool_op_get_flags,
++ .set_flags = ethtool_op_set_flags,
++#endif
++};
+
-+ /*
-+ * Calculate the loop count based on the largest descriptor ring
-+ * The idea is to wrap the largest ring a number of times using 64
-+ * send/receive pairs during each loop
-+ */
++void e1000e_set_ethtool_ops(struct net_device *netdev)
++{
++ /* have to "undeclare" const on this struct to remove warnings */
++ SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&e1000_ethtool_ops);
++}
++#endif /* SIOCETHTOOL */
+diff -Nurp linux-2.6.22-0/drivers/net/e1000e/hw.h linux-2.6.22-10/drivers/net/e1000e/hw.h
+--- linux-2.6.22-0/drivers/net/e1000e/hw.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.22-10/drivers/net/e1000e/hw.h 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,701 @@
++/*******************************************************************************
+
-+ if (rx_ring->count <= tx_ring->count)
-+ lc = ((tx_ring->count / 64) * 2) + 1;
-+ else
-+ lc = ((rx_ring->count / 64) * 2) + 1;
++ Intel PRO/1000 Linux driver
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
-+ k = 0;
-+ l = 0;
-+ for (j = 0; j <= lc; j++) { /* loop count loop */
-+ for (i = 0; i < 64; i++) { /* send the packets */
-+ e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
-+ 1024);
-+ pci_dma_sync_single_for_device(pdev,
-+ tx_ring->buffer_info[k].dma,
-+ tx_ring->buffer_info[k].length,
-+ PCI_DMA_TODEVICE);
-+ k++;
-+ if (k == tx_ring->count)
-+ k = 0;
-+ }
-+ ew32(TDT(0), k);
-+ msleep(200);
-+ time = jiffies; /* set the start time for the receive */
-+ good_cnt = 0;
-+ do { /* receive the sent packets */
-+ pci_dma_sync_single_for_cpu(pdev,
-+ rx_ring->buffer_info[l].dma, 2048,
-+ PCI_DMA_FROMDEVICE);
++ This program is free software; you can redistribute it and/or modify it
++ under the terms and conditions of the GNU General Public License,
++ version 2, as published by the Free Software Foundation.
+
-+ ret_val = e1000_check_lbtest_frame(
-+ rx_ring->buffer_info[l].skb, 1024);
-+ if (!ret_val)
-+ good_cnt++;
-+ l++;
-+ if (l == rx_ring->count)
-+ l = 0;
-+ /*
-+ * time + 20 msecs (200 msecs on 2.4) is more than
-+ * enough time to complete the receives, if it's
-+ * exceeded, break and error off
-+ */
-+ } while ((good_cnt < 64) && !time_after(jiffies, time + 20));
-+ if (good_cnt != 64) {
-+ ret_val = 13; /* ret_val is the same as mis-compare */
-+ break;
-+ }
-+ if (jiffies >= (time + 20)) {
-+ ret_val = 14; /* error code for time out error */
-+ break;
-+ }
-+ } /* end loop count loop */
-+ return ret_val;
-+}
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ more details.
+
-+static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
-+{
-+ struct e1000_hw *hw = &adapter->hw;
-+ /*
-+ * PHY loopback cannot be performed if SoL/IDER
-+ * sessions are active
-+ */
-+ if (hw->phy.ops.check_reset_block &&
-+ hw->phy.ops.check_reset_block(&adapter->hw)) {
-+ e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
-+ *data = 0;
-+ goto out;
-+ }
++ You should have received a copy of the GNU General Public License along with
++ this program; if not, write to the Free Software Foundation, Inc.,
++ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
-+ *data = e1000_setup_desc_rings(adapter);
-+ if (*data)
-+ goto out;
++ The full GNU General Public License is included in this distribution in
++ the file called "COPYING".
+
-+ *data = e1000_setup_loopback_test(adapter);
-+ if (*data)
-+ goto err_loopback;
++ Contact Information:
++ Linux NICS <linux.nics@intel.com>
++ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
++ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
-+ *data = e1000_run_loopback_test(adapter);
-+ e1000_loopback_cleanup(adapter);
++*******************************************************************************/
+
-+err_loopback:
-+ e1000_free_desc_rings(adapter);
-+out:
-+ return *data;
-+}
++#ifndef _E1000_HW_H_
++#define _E1000_HW_H_
+
-+static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
-+{
-+ struct e1000_hw *hw = &adapter->hw;
++#include "e1000_regs.h"
++#include "e1000_defines.h"
+
-+ *data = 0;
-+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
-+ int i = 0;
-+ hw->mac.serdes_has_link = 0;
++struct e1000_hw;
+
-+ /*
-+ * On some blade server designs, link establishment
-+ * could take as long as 2-3 minutes
-+ */
-+ do {
-+ hw->mac.ops.check_for_link(hw);
-+ if (hw->mac.serdes_has_link)
-+ return *data;
-+ msleep(20);
-+ } while (i++ < 3750);
++#define E1000_DEV_ID_82571EB_COPPER 0x105E
++#define E1000_DEV_ID_82571EB_FIBER 0x105F
++#define E1000_DEV_ID_82571EB_SERDES 0x1060
++#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
++#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
++#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
++#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
++#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
++#define E1000_DEV_ID_82571EB_QUAD_COPPER_LP 0x10BC
++#define E1000_DEV_ID_82572EI_COPPER 0x107D
++#define E1000_DEV_ID_82572EI_FIBER 0x107E
++#define E1000_DEV_ID_82572EI_SERDES 0x107F
++#define E1000_DEV_ID_82572EI 0x10B9
++#define E1000_DEV_ID_82573E 0x108B
++#define E1000_DEV_ID_82573E_IAMT 0x108C
++#define E1000_DEV_ID_82573L 0x109A
++#define E1000_DEV_ID_82574L 0x10D3
++#define E1000_DEV_ID_82574LA 0x10F6
++#define E1000_DEV_ID_82583V 0x150C
++#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
++#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
++#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA
++#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB
++#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049
++#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A
++#define E1000_DEV_ID_ICH8_IGP_C 0x104B
++#define E1000_DEV_ID_ICH8_IFE 0x104C
++#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4
++#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
++#define E1000_DEV_ID_ICH8_IGP_M 0x104D
++#define E1000_DEV_ID_ICH9_IGP_M 0x10BF
++#define E1000_DEV_ID_ICH9_IGP_M_AMT 0x10F5
++#define E1000_DEV_ID_ICH9_IGP_M_V 0x10CB
++#define E1000_DEV_ID_ICH9_IGP_AMT 0x10BD
++#define E1000_DEV_ID_ICH9_BM 0x10E5
++#define E1000_DEV_ID_ICH9_IGP_C 0x294C
++#define E1000_DEV_ID_ICH9_IFE 0x10C0
++#define E1000_DEV_ID_ICH9_IFE_GT 0x10C3
++#define E1000_DEV_ID_ICH9_IFE_G 0x10C2
++#define E1000_DEV_ID_ICH10_R_BM_LM 0x10CC
++#define E1000_DEV_ID_ICH10_R_BM_LF 0x10CD
++#define E1000_DEV_ID_ICH10_R_BM_V 0x10CE
++#define E1000_DEV_ID_ICH10_D_BM_LM 0x10DE
++#define E1000_DEV_ID_ICH10_D_BM_LF 0x10DF
++#define E1000_DEV_ID_PCH_M_HV_LM 0x10EA
++#define E1000_DEV_ID_PCH_M_HV_LC 0x10EB
++#define E1000_DEV_ID_PCH_D_HV_DM 0x10EF
++#define E1000_DEV_ID_PCH_D_HV_DC 0x10F0
++#define E1000_REVISION_0 0
++#define E1000_REVISION_1 1
++#define E1000_REVISION_2 2
++#define E1000_REVISION_3 3
++#define E1000_REVISION_4 4
+
-+ *data = 1;
-+ } else {
-+ hw->mac.ops.check_for_link(hw);
-+ if (hw->mac.autoneg)
-+ msleep(4000);
++#define E1000_FUNC_0 0
++#define E1000_FUNC_1 1
+
-+ if (!(er32(STATUS) &
-+ E1000_STATUS_LU))
-+ *data = 1;
-+ }
-+ return *data;
-+}
++#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
++#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
+
-+static int e1000_get_self_test_count(struct net_device *netdev)
-+{
-+ return E1000_TEST_LEN;
-+}
++enum e1000_mac_type {
++ e1000_undefined = 0,
++ e1000_82571,
++ e1000_82572,
++ e1000_82573,
++ e1000_82574,
++ e1000_82583,
++ e1000_80003es2lan,
++ e1000_ich8lan,
++ e1000_ich9lan,
++ e1000_ich10lan,
++ e1000_pchlan,
++ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
++};
+
-+static int e1000_get_stats_count(struct net_device *netdev)
-+{
-+ return E1000_STATS_LEN;
-+}
++enum e1000_media_type {
++ e1000_media_type_unknown = 0,
++ e1000_media_type_copper = 1,
++ e1000_media_type_fiber = 2,
++ e1000_media_type_internal_serdes = 3,
++ e1000_num_media_types
++};
+
-+static void e1000_diag_test(struct net_device *netdev,
-+ struct ethtool_test *eth_test, u64 *data)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ u16 autoneg_advertised;
-+ u8 forced_speed_duplex;
-+ u8 autoneg;
-+ bool if_running = netif_running(netdev);
++enum e1000_nvm_type {
++ e1000_nvm_unknown = 0,
++ e1000_nvm_none,
++ e1000_nvm_eeprom_spi,
++ e1000_nvm_flash_hw,
++ e1000_nvm_flash_sw
++};
+
-+ set_bit(__E1000_TESTING, &adapter->state);
-+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
-+ /* Offline tests */
++enum e1000_nvm_override {
++ e1000_nvm_override_none = 0,
++ e1000_nvm_override_spi_small,
++ e1000_nvm_override_spi_large,
++};
+
-+ /* save speed, duplex, autoneg settings */
-+ autoneg_advertised = adapter->hw.phy.autoneg_advertised;
-+ forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
-+ autoneg = adapter->hw.mac.autoneg;
++enum e1000_phy_type {
++ e1000_phy_unknown = 0,
++ e1000_phy_none,
++ e1000_phy_m88,
++ e1000_phy_igp,
++ e1000_phy_igp_2,
++ e1000_phy_gg82563,
++ e1000_phy_igp_3,
++ e1000_phy_ife,
++ e1000_phy_bm,
++ e1000_phy_82578,
++ e1000_phy_82577,
++};
+
-+ e_info("offline testing starting\n");
++enum e1000_bus_type {
++ e1000_bus_type_unknown = 0,
++ e1000_bus_type_pci,
++ e1000_bus_type_pcix,
++ e1000_bus_type_pci_express,
++ e1000_bus_type_reserved
++};
+
-+ /*
-+ * Link test performed before hardware reset so autoneg doesn't
-+ * interfere with test result
-+ */
-+ if (e1000_link_test(adapter, &data[4]))
-+ eth_test->flags |= ETH_TEST_FL_FAILED;
++enum e1000_bus_speed {
++ e1000_bus_speed_unknown = 0,
++ e1000_bus_speed_33,
++ e1000_bus_speed_66,
++ e1000_bus_speed_100,
++ e1000_bus_speed_120,
++ e1000_bus_speed_133,
++ e1000_bus_speed_2500,
++ e1000_bus_speed_5000,
++ e1000_bus_speed_reserved
++};
+
-+ if (if_running)
-+ /* indicate we're in test mode */
-+ dev_close(netdev);
-+ else
-+ e1000_reset(adapter);
++enum e1000_bus_width {
++ e1000_bus_width_unknown = 0,
++ e1000_bus_width_pcie_x1,
++ e1000_bus_width_pcie_x2,
++ e1000_bus_width_pcie_x4 = 4,
++ e1000_bus_width_pcie_x8 = 8,
++ e1000_bus_width_32,
++ e1000_bus_width_64,
++ e1000_bus_width_reserved
++};
+
-+ if (e1000_reg_test(adapter, &data[0]))
-+ eth_test->flags |= ETH_TEST_FL_FAILED;
++enum e1000_1000t_rx_status {
++ e1000_1000t_rx_status_not_ok = 0,
++ e1000_1000t_rx_status_ok,
++ e1000_1000t_rx_status_undefined = 0xFF
++};
+
-+ e1000_reset(adapter);
-+ if (e1000_eeprom_test(adapter, &data[1]))
-+ eth_test->flags |= ETH_TEST_FL_FAILED;
++enum e1000_rev_polarity {
++ e1000_rev_polarity_normal = 0,
++ e1000_rev_polarity_reversed,
++ e1000_rev_polarity_undefined = 0xFF
++};
+
-+ e1000_reset(adapter);
-+ if (e1000_intr_test(adapter, &data[2]))
-+ eth_test->flags |= ETH_TEST_FL_FAILED;
++enum e1000_fc_mode {
++ e1000_fc_none = 0,
++ e1000_fc_rx_pause,
++ e1000_fc_tx_pause,
++ e1000_fc_full,
++ e1000_fc_default = 0xFF
++};
+
-+ e1000_reset(adapter);
-+ /* make sure the phy is powered up */
-+ e1000_power_up_phy(&adapter->hw);
-+ if (e1000_loopback_test(adapter, &data[3]))
-+ eth_test->flags |= ETH_TEST_FL_FAILED;
++enum e1000_ms_type {
++ e1000_ms_hw_default = 0,
++ e1000_ms_force_master,
++ e1000_ms_force_slave,
++ e1000_ms_auto
++};
+
-+ /* restore speed, duplex, autoneg settings */
-+ adapter->hw.phy.autoneg_advertised = autoneg_advertised;
-+ adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
-+ adapter->hw.mac.autoneg = autoneg;
++enum e1000_smart_speed {
++ e1000_smart_speed_default = 0,
++ e1000_smart_speed_on,
++ e1000_smart_speed_off
++};
+
-+ /* force this routine to wait until autoneg complete/timeout */
-+ adapter->hw.phy.autoneg_wait_to_complete = 1;
-+ e1000_reset(adapter);
-+ adapter->hw.phy.autoneg_wait_to_complete = 0;
++enum e1000_serdes_link_state {
++ e1000_serdes_link_down = 0,
++ e1000_serdes_link_autoneg_progress,
++ e1000_serdes_link_autoneg_complete,
++ e1000_serdes_link_forced_up
++};
+
-+ clear_bit(__E1000_TESTING, &adapter->state);
-+ if (if_running)
-+ dev_open(netdev);
-+ } else {
-+ e_info("online testing starting\n");
-+ /* Online tests */
-+ if (e1000_link_test(adapter, &data[4]))
-+ eth_test->flags |= ETH_TEST_FL_FAILED;
++/* Receive Descriptor */
++struct e1000_rx_desc {
++ __le64 buffer_addr; /* Address of the descriptor's data buffer */
++ __le16 length; /* Length of data DMAed into data buffer */
++ __le16 csum; /* Packet checksum */
++ u8 status; /* Descriptor status */
++ u8 errors; /* Descriptor Errors */
++ __le16 special;
++};
++
++/* Receive Descriptor - Extended */
++union e1000_rx_desc_extended {
++ struct {
++ __le64 buffer_addr;
++ __le64 reserved;
++ } read;
++ struct {
++ struct {
++ __le32 mrq; /* Multiple Rx Queues */
++ union {
++ __le32 rss; /* RSS Hash */
++ struct {
++ __le16 ip_id; /* IP id */
++ __le16 csum; /* Packet Checksum */
++ } csum_ip;
++ } hi_dword;
++ } lower;
++ struct {
++ __le32 status_error; /* ext status/error */
++ __le16 length;
++ __le16 vlan; /* VLAN tag */
++ } upper;
++ } wb; /* writeback */
++};
+
-+ /* Online tests aren't run; pass by default */
-+ data[0] = 0;
-+ data[1] = 0;
-+ data[2] = 0;
-+ data[3] = 0;
++#define MAX_PS_BUFFERS 4
++/* Receive Descriptor - Packet Split */
++union e1000_rx_desc_packet_split {
++ struct {
++ /* one buffer for protocol header(s), three data buffers */
++ __le64 buffer_addr[MAX_PS_BUFFERS];
++ } read;
++ struct {
++ struct {
++ __le32 mrq; /* Multiple Rx Queues */
++ union {
++ __le32 rss; /* RSS Hash */
++ struct {
++ __le16 ip_id; /* IP id */
++ __le16 csum; /* Packet Checksum */
++ } csum_ip;
++ } hi_dword;
++ } lower;
++ struct {
++ __le32 status_error; /* ext status/error */
++ __le16 length0; /* length of buffer 0 */
++ __le16 vlan; /* VLAN tag */
++ } middle;
++ struct {
++ __le16 header_status;
++ __le16 length[3]; /* length of buffers 1-3 */
++ } upper;
++ __le64 reserved;
++ } wb; /* writeback */
++};
+
-+ clear_bit(__E1000_TESTING, &adapter->state);
-+ }
-+ msleep_interruptible(4 * 1000);
-+}
++/* Transmit Descriptor */
++struct e1000_tx_desc {
++ __le64 buffer_addr; /* Address of the descriptor's data buffer */
++ union {
++ __le32 data;
++ struct {
++ __le16 length; /* Data buffer length */
++ u8 cso; /* Checksum offset */
++ u8 cmd; /* Descriptor control */
++ } flags;
++ } lower;
++ union {
++ __le32 data;
++ struct {
++ u8 status; /* Descriptor status */
++ u8 css; /* Checksum start */
++ __le16 special;
++ } fields;
++ } upper;
++};
+
-+static void e1000_get_wol(struct net_device *netdev,
-+ struct ethtool_wolinfo *wol)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
++/* Offload Context Descriptor */
++struct e1000_context_desc {
++ union {
++ __le32 ip_config;
++ struct {
++ u8 ipcss; /* IP checksum start */
++ u8 ipcso; /* IP checksum offset */
++ __le16 ipcse; /* IP checksum end */
++ } ip_fields;
++ } lower_setup;
++ union {
++ __le32 tcp_config;
++ struct {
++ u8 tucss; /* TCP checksum start */
++ u8 tucso; /* TCP checksum offset */
++ __le16 tucse; /* TCP checksum end */
++ } tcp_fields;
++ } upper_setup;
++ __le32 cmd_and_length;
++ union {
++ __le32 data;
++ struct {
++ u8 status; /* Descriptor status */
++ u8 hdr_len; /* Header length */
++ __le16 mss; /* Maximum segment size */
++ } fields;
++ } tcp_seg_setup;
++};
+
-+ wol->supported = 0;
-+ wol->wolopts = 0;
++/* Offload data descriptor */
++struct e1000_data_desc {
++ __le64 buffer_addr; /* Address of the descriptor's buffer address */
++ union {
++ __le32 data;
++ struct {
++ __le16 length; /* Data buffer length */
++ u8 typ_len_ext;
++ u8 cmd;
++ } flags;
++ } lower;
++ union {
++ __le32 data;
++ struct {
++ u8 status; /* Descriptor status */
++ u8 popts; /* Packet Options */
++ __le16 special;
++ } fields;
++ } upper;
++};
+
-+ if (!(adapter->flags & FLAG_HAS_WOL))
-+ return;
++/* Statistics counters collected by the MAC */
++struct e1000_hw_stats {
++ u64 crcerrs;
++ u64 algnerrc;
++ u64 symerrs;
++ u64 rxerrc;
++ u64 mpc;
++ u64 scc;
++ u64 ecol;
++ u64 mcc;
++ u64 latecol;
++ u64 colc;
++ u64 dc;
++ u64 tncrs;
++ u64 sec;
++ u64 cexterr;
++ u64 rlec;
++ u64 xonrxc;
++ u64 xontxc;
++ u64 xoffrxc;
++ u64 xofftxc;
++ u64 fcruc;
++ u64 prc64;
++ u64 prc127;
++ u64 prc255;
++ u64 prc511;
++ u64 prc1023;
++ u64 prc1522;
++ u64 gprc;
++ u64 bprc;
++ u64 mprc;
++ u64 gptc;
++ u64 gorc;
++ u64 gotc;
++ u64 rnbc;
++ u64 ruc;
++ u64 rfc;
++ u64 roc;
++ u64 rjc;
++ u64 mgprc;
++ u64 mgpdc;
++ u64 mgptc;
++ u64 tor;
++ u64 tot;
++ u64 tpr;
++ u64 tpt;
++ u64 ptc64;
++ u64 ptc127;
++ u64 ptc255;
++ u64 ptc511;
++ u64 ptc1023;
++ u64 ptc1522;
++ u64 mptc;
++ u64 bptc;
++ u64 tsctc;
++ u64 tsctfc;
++ u64 iac;
++ u64 icrxptc;
++ u64 icrxatc;
++ u64 ictxptc;
++ u64 ictxatc;
++ u64 ictxqec;
++ u64 ictxqmtc;
++ u64 icrxdmtc;
++ u64 icrxoc;
++ u64 doosync;
++};
+
-+ wol->supported = WAKE_UCAST | WAKE_MCAST |
-+ WAKE_BCAST | WAKE_MAGIC |
-+ WAKE_PHY | WAKE_ARP;
+
-+ /* apply any specific unsupported masks here */
-+ if (adapter->flags & FLAG_NO_WAKE_UCAST) {
-+ wol->supported &= ~WAKE_UCAST;
++struct e1000_phy_stats {
++ u32 idle_errors;
++ u32 receive_errors;
++};
+
-+ if (adapter->wol & E1000_WUFC_EX)
-+ e_err("Interface does not support directed (unicast)"
-+ " frame wake-up packets\n");
-+ }
++struct e1000_host_mng_dhcp_cookie {
++ u32 signature;
++ u8 status;
++ u8 reserved0;
++ u16 vlan_id;
++ u32 reserved1;
++ u16 reserved2;
++ u8 reserved3;
++ u8 checksum;
++};
+
-+ if (adapter->wol & E1000_WUFC_EX)
-+ wol->wolopts |= WAKE_UCAST;
-+ if (adapter->wol & E1000_WUFC_MC)
-+ wol->wolopts |= WAKE_MCAST;
-+ if (adapter->wol & E1000_WUFC_BC)
-+ wol->wolopts |= WAKE_BCAST;
-+ if (adapter->wol & E1000_WUFC_MAG)
-+ wol->wolopts |= WAKE_MAGIC;
-+ if (adapter->wol & E1000_WUFC_LNKC)
-+ wol->wolopts |= WAKE_PHY;
-+ if (adapter->wol & E1000_WUFC_ARP)
-+ wol->wolopts |= WAKE_ARP;
-+}
++/* Host Interface "Rev 1" */
++struct e1000_host_command_header {
++ u8 command_id;
++ u8 command_length;
++ u8 command_options;
++ u8 checksum;
++};
+
-+static int e1000_set_wol(struct net_device *netdev,
-+ struct ethtool_wolinfo *wol)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
++#define E1000_HI_MAX_DATA_LENGTH 252
++struct e1000_host_command_info {
++ struct e1000_host_command_header command_header;
++ u8 command_data[E1000_HI_MAX_DATA_LENGTH];
++};
+
-+ if (wol->wolopts & WAKE_MAGICSECURE)
-+ return -EOPNOTSUPP;
++/* Host Interface "Rev 2" */
++struct e1000_host_mng_command_header {
++ u8 command_id;
++ u8 checksum;
++ u16 reserved1;
++ u16 reserved2;
++ u16 command_length;
++};
+
-+ if (!(adapter->flags & FLAG_HAS_WOL))
-+ return wol->wolopts ? -EOPNOTSUPP : 0;
++#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
++struct e1000_host_mng_command_info {
++ struct e1000_host_mng_command_header command_header;
++ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
++};
+
-+ /* these settings will always override what we currently have */
-+ adapter->wol = 0;
++#include "e1000_mac.h"
++#include "e1000_phy.h"
++#include "e1000_nvm.h"
++#include "e1000_manage.h"
+
-+ if (wol->wolopts & WAKE_UCAST)
-+ adapter->wol |= E1000_WUFC_EX;
-+ if (wol->wolopts & WAKE_MCAST)
-+ adapter->wol |= E1000_WUFC_MC;
-+ if (wol->wolopts & WAKE_BCAST)
-+ adapter->wol |= E1000_WUFC_BC;
-+ if (wol->wolopts & WAKE_MAGIC)
-+ adapter->wol |= E1000_WUFC_MAG;
-+ if (wol->wolopts & WAKE_PHY)
-+ adapter->wol |= E1000_WUFC_LNKC;
-+ if (wol->wolopts & WAKE_ARP)
-+ adapter->wol |= E1000_WUFC_ARP;
++struct e1000_mac_operations {
++ /* Function pointers for the MAC. */
++ s32 (*init_params)(struct e1000_hw *);
++ s32 (*id_led_init)(struct e1000_hw *);
++ s32 (*blink_led)(struct e1000_hw *);
++ s32 (*check_for_link)(struct e1000_hw *);
++ bool (*check_mng_mode)(struct e1000_hw *hw);
++ s32 (*cleanup_led)(struct e1000_hw *);
++ void (*clear_hw_cntrs)(struct e1000_hw *);
++ void (*clear_vfta)(struct e1000_hw *);
++ s32 (*get_bus_info)(struct e1000_hw *);
++ void (*set_lan_id)(struct e1000_hw *);
++ s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
++ s32 (*led_on)(struct e1000_hw *);
++ s32 (*led_off)(struct e1000_hw *);
++ void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32);
++ s32 (*reset_hw)(struct e1000_hw *);
++ s32 (*init_hw)(struct e1000_hw *);
++ s32 (*setup_link)(struct e1000_hw *);
++ s32 (*setup_physical_interface)(struct e1000_hw *);
++ s32 (*setup_led)(struct e1000_hw *);
++ void (*write_vfta)(struct e1000_hw *, u32, u32);
++ void (*mta_set)(struct e1000_hw *, u32);
++ void (*config_collision_dist)(struct e1000_hw *);
++ void (*rar_set)(struct e1000_hw *, u8*, u32);
++ s32 (*read_mac_addr)(struct e1000_hw *);
++ s32 (*validate_mdi_setting)(struct e1000_hw *);
++ s32 (*mng_host_if_write)(struct e1000_hw *, u8*, u16, u16, u8*);
++ s32 (*mng_write_cmd_header)(struct e1000_hw *hw,
++ struct e1000_host_mng_command_header*);
++ s32 (*mng_enable_host_if)(struct e1000_hw *);
++ s32 (*wait_autoneg)(struct e1000_hw *);
++};
+
-+ return 0;
-+}
++struct e1000_phy_operations {
++ s32 (*init_params)(struct e1000_hw *);
++ s32 (*acquire)(struct e1000_hw *);
++ s32 (*cfg_on_link_up)(struct e1000_hw *);
++ s32 (*check_polarity)(struct e1000_hw *);
++ s32 (*check_reset_block)(struct e1000_hw *);
++ s32 (*commit)(struct e1000_hw *);
++ s32 (*force_speed_duplex)(struct e1000_hw *);
++ s32 (*get_cfg_done)(struct e1000_hw *hw);
++ s32 (*get_cable_length)(struct e1000_hw *);
++ s32 (*get_info)(struct e1000_hw *);
++ s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
++ void (*release)(struct e1000_hw *);
++ s32 (*reset)(struct e1000_hw *);
++ s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
++ s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
++ s32 (*write_reg)(struct e1000_hw *, u32, u16);
++ void (*power_up)(struct e1000_hw *);
++ void (*power_down)(struct e1000_hw *);
++};
+
-+/* toggle LED 4 times per second = 2 "blinks" per second */
-+#define E1000_ID_INTERVAL (HZ/4)
++struct e1000_nvm_operations {
++ s32 (*init_params)(struct e1000_hw *);
++ s32 (*acquire)(struct e1000_hw *);
++ s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
++ void (*release)(struct e1000_hw *);
++ void (*reload)(struct e1000_hw *);
++ s32 (*update)(struct e1000_hw *);
++ s32 (*valid_led_default)(struct e1000_hw *, u16 *);
++ s32 (*validate)(struct e1000_hw *);
++ s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
++};
+
-+/* bit defines for adapter->led_status */
-+#define E1000_LED_ON 0
++struct e1000_mac_info {
++ struct e1000_mac_operations ops;
++ u8 addr[6];
++ u8 perm_addr[6];
+
-+static void e1000_led_blink_callback(unsigned long data)
-+{
-+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
++ enum e1000_mac_type type;
+
-+ if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
-+ adapter->hw.mac.ops.led_off(&adapter->hw);
-+ else
-+ adapter->hw.mac.ops.led_on(&adapter->hw);
++ u32 collision_delta;
++ u32 ledctl_default;
++ u32 ledctl_mode1;
++ u32 ledctl_mode2;
++ u32 mc_filter_type;
++ u32 tx_packet_delta;
++ u32 txcw;
+
-+ mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
-+}
++ u16 current_ifs_val;
++ u16 ifs_max_val;
++ u16 ifs_min_val;
++ u16 ifs_ratio;
++ u16 ifs_step_size;
++ u16 mta_reg_count;
+
-+static int e1000_phys_id(struct net_device *netdev, u32 data)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
++ /* Maximum size of the MTA register table in all supported adapters */
++ #define MAX_MTA_REG 128
++ u32 mta_shadow[MAX_MTA_REG];
++ u16 rar_entry_count;
+
-+ if (!data)
-+ data = INT_MAX;
++ u8 forced_speed_duplex;
+
-+ if ((hw->phy.type == e1000_phy_ife) ||
-+ (hw->mac.type == e1000_82574)) {
-+ if (!adapter->blink_timer.function) {
-+ init_timer(&adapter->blink_timer);
-+ adapter->blink_timer.function =
-+ e1000_led_blink_callback;
-+ adapter->blink_timer.data = (unsigned long) adapter;
-+ }
-+ mod_timer(&adapter->blink_timer, jiffies);
-+ msleep_interruptible(data * 1000);
-+ del_timer_sync(&adapter->blink_timer);
-+ if (hw->phy.type == e1000_phy_ife)
-+ hw->phy.ops.write_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
-+ 0);
-+ } else {
-+ hw->mac.ops.blink_led(hw);
-+ msleep_interruptible(data * 1000);
-+ }
++ bool adaptive_ifs;
++ bool arc_subsystem_valid;
++ bool asf_firmware_present;
++ bool autoneg;
++ bool autoneg_failed;
++ bool get_link_status;
++ bool in_ifs_mode;
++ enum e1000_serdes_link_state serdes_link_state;
++ bool serdes_has_link;
++ bool tx_pkt_filtering;
++};
+
-+ hw->mac.ops.led_off(hw);
-+ clear_bit(E1000_LED_ON, &adapter->led_status);
-+ hw->mac.ops.cleanup_led(hw);
++struct e1000_phy_info {
++ struct e1000_phy_operations ops;
++ enum e1000_phy_type type;
+
-+ return 0;
-+}
++ enum e1000_1000t_rx_status local_rx;
++ enum e1000_1000t_rx_status remote_rx;
++ enum e1000_ms_type ms_type;
++ enum e1000_ms_type original_ms_type;
++ enum e1000_rev_polarity cable_polarity;
++ enum e1000_smart_speed smart_speed;
+
-+static int e1000_get_coalesce(struct net_device *netdev,
-+ struct ethtool_coalesce *ec)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
++ u32 addr;
++ u32 id;
++ u32 reset_delay_us; /* in usec */
++ u32 revision;
+
-+ if (adapter->itr_setting <= 3)
-+ ec->rx_coalesce_usecs = adapter->itr_setting;
-+ else
-+ ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
++ enum e1000_media_type media_type;
+
-+ ec->stats_block_coalesce_usecs = adapter->stats_freq_us;
++ u16 autoneg_advertised;
++ u16 autoneg_mask;
++ u16 cable_length;
++ u16 max_cable_length;
++ u16 min_cable_length;
+
-+ return 0;
-+}
++ u8 mdix;
+
-+static int e1000_set_coalesce(struct net_device *netdev,
-+ struct ethtool_coalesce *ec)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
++ bool disable_polarity_correction;
++ bool is_mdix;
++ bool polarity_correction;
++ bool reset_disable;
++ bool speed_downgraded;
++ bool autoneg_wait_to_complete;
++};
+
-+ if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
-+ ((ec->rx_coalesce_usecs > 3) &&
-+ (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
-+ (ec->rx_coalesce_usecs == 2) ||
-+ (ec->stats_block_coalesce_usecs > (10 * 1000000)))
-+ return -EINVAL;
++struct e1000_nvm_info {
++ struct e1000_nvm_operations ops;
++ enum e1000_nvm_type type;
++ enum e1000_nvm_override override;
+
-+ adapter->stats_freq_us = ec->stats_block_coalesce_usecs;
++ u32 flash_bank_size;
++ u32 flash_base_addr;
+
-+ if (ec->rx_coalesce_usecs <= 3) {
-+ adapter->itr = 20000;
-+ adapter->itr_setting = ec->rx_coalesce_usecs;
-+ } else {
-+ adapter->itr = (1000000 / ec->rx_coalesce_usecs);
-+ adapter->itr_setting = adapter->itr & ~3;
-+ }
++ u16 word_size;
++ u16 delay_usec;
++ u16 address_bits;
++ u16 opcode_bits;
++ u16 page_size;
++};
+
-+ if (adapter->itr_setting != 0)
-+ ew32(ITR, 1000000000 / (adapter->itr * 256));
-+ else
-+ ew32(ITR, 0);
++struct e1000_bus_info {
++ enum e1000_bus_type type;
++ enum e1000_bus_speed speed;
++ enum e1000_bus_width width;
+
-+ return 0;
-+}
++ u16 func;
++ u16 pci_cmd_word;
++};
+
-+static int e1000_nway_reset(struct net_device *netdev)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ if (netif_running(netdev))
-+ e1000_reinit_locked(adapter);
-+ return 0;
-+}
++struct e1000_fc_info {
++ u32 high_water; /* Flow control high-water mark */
++ u32 low_water; /* Flow control low-water mark */
++ u16 pause_time; /* Flow control pause timer */
++ bool send_xon; /* Flow control send XON */
++ bool strict_ieee; /* Strict IEEE mode */
++ enum e1000_fc_mode current_mode; /* FC mode in effect */
++ enum e1000_fc_mode requested_mode; /* FC mode requested by caller */
++};
+
-+static void e1000_get_ethtool_stats(struct net_device *netdev,
-+ struct ethtool_stats *stats,
-+ u64 *data)
-+{
-+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ int i;
++struct e1000_dev_spec_82571 {
++ bool laa_is_present;
++ u32 smb_counter;
++};
+
-+ e1000_update_stats(adapter);
-+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
-+ char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
-+ data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
-+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
-+ }
-+}
++struct e1000_shadow_ram {
++ u16 value;
++ bool modified;
++};
+
-+static void e1000_get_strings(struct net_device *netdev, u32 stringset,
-+ u8 *data)
-+{
-+ u8 *p = data;
-+ int i;
++#define E1000_ICH8_SHADOW_RAM_WORDS 2048
+
-+ switch (stringset) {
-+ case ETH_SS_TEST:
-+ memcpy(data, *e1000_gstrings_test, sizeof(e1000_gstrings_test));
-+ break;
-+ case ETH_SS_STATS:
-+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
-+ memcpy(p, e1000_gstrings_stats[i].stat_string,
-+ ETH_GSTRING_LEN);
-+ p += ETH_GSTRING_LEN;
-+ }
-+ break;
-+ }
-+}
++struct e1000_dev_spec_ich8lan {
++ bool kmrn_lock_loss_workaround_enabled;
++ struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
++};
+
-+static const struct ethtool_ops e1000_ethtool_ops = {
-+ .get_settings = e1000_get_settings,
-+ .set_settings = e1000_set_settings,
-+ .get_drvinfo = e1000_get_drvinfo,
-+ .get_regs_len = e1000_get_regs_len,
-+ .get_regs = e1000_get_regs,
-+ .get_wol = e1000_get_wol,
-+ .set_wol = e1000_set_wol,
-+ .get_msglevel = e1000_get_msglevel,
-+ .set_msglevel = e1000_set_msglevel,
-+ .nway_reset = e1000_nway_reset,
-+ .get_link = e1000_get_link,
-+ .get_eeprom_len = e1000_get_eeprom_len,
-+ .get_eeprom = e1000_get_eeprom,
-+ .set_eeprom = e1000_set_eeprom,
-+ .get_ringparam = e1000_get_ringparam,
-+ .set_ringparam = e1000_set_ringparam,
-+ .get_pauseparam = e1000_get_pauseparam,
-+ .set_pauseparam = e1000_set_pauseparam,
-+ .get_rx_csum = e1000_get_rx_csum,
-+ .set_rx_csum = e1000_set_rx_csum,
-+ .get_tx_csum = e1000_get_tx_csum,
-+ .set_tx_csum = e1000_set_tx_csum,
-+ .get_sg = ethtool_op_get_sg,
-+ .set_sg = ethtool_op_set_sg,
-+#ifdef NETIF_F_TSO
-+ .get_tso = ethtool_op_get_tso,
-+ .set_tso = e1000_set_tso,
-+#endif
-+ .self_test = e1000_diag_test,
-+ .get_strings = e1000_get_strings,
-+ .phys_id = e1000_phys_id,
-+ .get_ethtool_stats = e1000_get_ethtool_stats,
-+ .self_test_count = e1000_get_self_test_count,
-+ .get_stats_count = e1000_get_stats_count,
-+ .get_coalesce = e1000_get_coalesce,
-+ .set_coalesce = e1000_set_coalesce,
++struct e1000_hw {
++ struct e1000_adapter *adapter;
++
++ u8 __iomem *hw_addr;
++ u8 __iomem *flash_address;
++
++ struct e1000_mac_info mac;
++ struct e1000_fc_info fc;
++ struct e1000_phy_info phy;
++ struct e1000_nvm_info nvm;
++ struct e1000_bus_info bus;
++ struct e1000_host_mng_dhcp_cookie mng_cookie;
++
++ union {
++ struct e1000_dev_spec_82571 _82571;
++ struct e1000_dev_spec_ich8lan ich8lan;
++ } dev_spec;
++
++ u16 device_id;
++ u16 subsystem_vendor_id;
++ u16 subsystem_device_id;
++ u16 vendor_id;
++
++ u8 revision_id;
+};
+
-+void e1000_set_ethtool_ops(struct net_device *netdev)
-+{
-+ /* have to "undeclare" const on this struct to remove warnings */
-+ SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&e1000_ethtool_ops);
-+}
-+#endif /* SIOCETHTOOL */
++#include "e1000_82571.h"
++#include "e1000_80003es2lan.h"
++#include "e1000_ich8lan.h"
++
++/* These functions must be implemented by drivers */
++s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
++
++#endif
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/kcompat.c linux-2.6.22-10/drivers/net/e1000e/kcompat.c
--- linux-2.6.22-0/drivers/net/e1000e/kcompat.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/kcompat.c 2008-11-10 17:29:35.000000000 +0100
-@@ -0,0 +1,319 @@
++++ linux-2.6.22-10/drivers/net/e1000e/kcompat.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,480 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+
+*******************************************************************************/
+
-+
-+#define DRIVER_E1000E
-+
-+#ifdef DRIVER_E1000E
+#include "e1000.h"
-+#endif
-+
-+
-+
-+
+#include "kcompat.h"
+
+/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,21) )
++struct sk_buff *
++_kc_skb_pad(struct sk_buff *skb, int pad)
++{
++ struct sk_buff *nskb;
++
++ /* If the skbuff is non linear tailroom is always zero.. */
++ if(skb_tailroom(skb) >= pad)
++ {
++ memset(skb->data+skb->len, 0, pad);
++ return skb;
++ }
++
++ nskb = skb_copy_expand(skb, skb_headroom(skb), skb_tailroom(skb) + pad, GFP_ATOMIC);
++ kfree_skb(skb);
++ if(nskb)
++ memset(nskb->data+nskb->len, 0, pad);
++ return nskb;
++}
++#endif /* < 2.4.21 */
++
++/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) )
+
+/**************************************/
+}
+
+int
-+_kc_pci_save_state(struct pci_dev *dev, u32 *buffer)
-+{
-+ return 0;
-+}
-+
-+int
-+_kc_pci_restore_state(struct pci_dev *pdev, u32 *buffer)
-+{
-+ return 0;
-+}
-+
-+int
+_kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable)
+{
+ return 0;
+#endif /* <= 2.6.17 */
+
+/*****************************************************************************/
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) )
-+#endif /* < 2.6.23 */
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) )
++int _kc_pci_save_state(struct pci_dev *pdev)
++{
++ struct net_device *netdev = pci_get_drvdata(pdev);
++ struct adapter_struct *adapter = netdev_priv(netdev);
++ int size = PCI_CONFIG_SPACE_LEN, i;
++ u16 pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP);
++ u16 pcie_link_status;
++
++ if (pcie_cap_offset) {
++ if (!pci_read_config_word(pdev,
++ pcie_cap_offset + PCIE_LINK_STATUS,
++ &pcie_link_status))
++ size = PCIE_CONFIG_SPACE_LEN;
++ }
++ pci_config_space_ich8lan();
++#ifdef HAVE_PCI_ERS
++ if (adapter->config_space == NULL)
++#else
++ WARN_ON(adapter->config_space != NULL);
++#endif
++ adapter->config_space = kmalloc(size, GFP_KERNEL);
++ if (!adapter->config_space) {
++ printk(KERN_ERR "Out of memory in pci_save_state\n");
++ return -ENOMEM;
++ }
++ for (i = 0; i < (size / 4); i++)
++ pci_read_config_dword(pdev, i * 4, &adapter->config_space[i]);
++ return 0;
++}
++
++void _kc_pci_restore_state(struct pci_dev * pdev)
++{
++ struct net_device *netdev = pci_get_drvdata(pdev);
++ struct adapter_struct *adapter = netdev_priv(netdev);
++ int size = PCI_CONFIG_SPACE_LEN, i;
++ u16 pcie_cap_offset;
++ u16 pcie_link_status;
++
++ if (adapter->config_space != NULL) {
++ pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP);
++ if (pcie_cap_offset &&
++ !pci_read_config_word(pdev,
++ pcie_cap_offset + PCIE_LINK_STATUS,
++ &pcie_link_status))
++ size = PCIE_CONFIG_SPACE_LEN;
++
++ pci_config_space_ich8lan();
++ for (i = 0; i < (size / 4); i++)
++ pci_write_config_dword(pdev, i * 4, adapter->config_space[i]);
++#ifndef HAVE_PCI_ERS
++ kfree(adapter->config_space);
++ adapter->config_space = NULL;
++#endif
++ }
++}
++
++#ifdef HAVE_PCI_ERS
++void _kc_free_netdev(struct net_device *netdev)
++{
++ struct adapter_struct *adapter = netdev_priv(netdev);
++
++ if (adapter->config_space != NULL)
++ kfree(adapter->config_space);
++#ifdef CONFIG_SYSFS
++ if (netdev->reg_state == NETREG_UNINITIALIZED) {
++ kfree((char *)netdev - netdev->padded);
++ } else {
++ BUG_ON(netdev->reg_state != NETREG_UNREGISTERED);
++ netdev->reg_state = NETREG_RELEASED;
++ class_device_put(&netdev->class_dev);
++ }
++#else
++ kfree((char *)netdev - netdev->padded);
++#endif
++}
++#endif
++#endif /* <= 2.6.18 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) )
+#ifdef NAPI
++/* this function returns the true netdev of the napi struct */
++struct net_device * napi_to_netdev(struct napi_struct *napi)
++{
++ struct adapter_struct *adapter = container_of(napi,
++ struct adapter_struct,
++ napi);
++ return adapter->netdev;
++}
++
+int __kc_adapter_clean(struct net_device *netdev, int *budget)
+{
+ int work_done;
+ int work_to_do = min(*budget, netdev->quota);
+ struct adapter_struct *adapter = netdev_priv(netdev);
-+#ifdef DRIVER_E1000E
+ struct napi_struct *napi = &adapter->napi;
-+#else
-+ struct napi_struct *napi = &adapter->rx_ring[0].napi;
-+#endif
-+
+ work_done = napi->poll(napi, work_to_do);
+ *budget -= work_done;
+ netdev->quota -= work_done;
-+ return work_done ? 1 : 0;
++ return (work_done >= work_to_do) ? 1 : 0;
+}
+#endif /* NAPI */
+#endif /* <= 2.6.24 */
+
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) )
++#ifdef HAVE_TX_MQ
++void _kc_netif_tx_stop_all_queues(struct net_device *netdev)
++{
++ struct adapter_struct *adapter = netdev_priv(netdev);
++ int i;
++
++ netif_stop_queue(netdev);
++ if (netif_is_multiqueue(netdev))
++ for (i = 0; i < adapter->num_tx_queues; i++)
++ netif_stop_subqueue(netdev, i);
++}
++void _kc_netif_tx_wake_all_queues(struct net_device *netdev)
++{
++ struct adapter_struct *adapter = netdev_priv(netdev);
++ int i;
++
++ netif_wake_queue(netdev);
++ if (netif_is_multiqueue(netdev))
++ for (i = 0; i < adapter->num_tx_queues; i++)
++ netif_wake_subqueue(netdev, i);
++}
++void _kc_netif_tx_start_all_queues(struct net_device *netdev)
++{
++ struct adapter_struct *adapter = netdev_priv(netdev);
++ int i;
++
++ netif_start_queue(netdev);
++ if (netif_is_multiqueue(netdev))
++ for (i = 0; i < adapter->num_tx_queues; i++)
++ netif_start_subqueue(netdev, i);
++}
++#endif /* HAVE_TX_MQ */
++#endif /* < 2.6.27 */
++
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) )
++
++int
++_kc_pci_prepare_to_sleep(struct pci_dev *dev)
++{
++ pci_power_t target_state;
++ int error;
++
++ target_state = pci_choose_state(dev, PMSG_SUSPEND);
++
++ pci_enable_wake(dev, target_state, true);
++
++ error = pci_set_power_state(dev, target_state);
++
++ if (error)
++ pci_enable_wake(dev, target_state, false);
++
++ return error;
++}
++
++int
++_kc_pci_wake_from_d3(struct pci_dev *dev, bool enable)
++{
++ int err;
++
++ err = pci_enable_wake(dev, PCI_D3cold, enable);
++ if (err)
++ goto out;
++
++ err = pci_enable_wake(dev, PCI_D3hot, enable);
++
++out:
++ return err;
++}
++#endif /* < 2.6.28 */
++
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29) )
++#endif /* < 2.6.29 */
++
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) )
++#endif /* < 2.6.30 */
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/kcompat_ethtool.c linux-2.6.22-10/drivers/net/e1000e/kcompat_ethtool.c
--- linux-2.6.22-0/drivers/net/e1000e/kcompat_ethtool.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/kcompat_ethtool.c 2008-10-14 01:51:32.000000000 +0200
++++ linux-2.6.22-10/drivers/net/e1000e/kcompat_ethtool.c 2009-06-24 00:32:20.000000000 +0200
@@ -0,0 +1,1169 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ if (bmcr & BMCR_ANENABLE) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->autoneg = AUTONEG_ENABLE;
-+
++
+ nego = mii_nway_result(advert & lpa);
+ if (nego == LPA_100FULL || nego == LPA_100HALF)
+ ecmd->speed = SPEED_100;
+ return -EINVAL;
+ if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
-+
++
+ /* ignore supported, maxtxpkt, maxrxpkt */
-+
++
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ u32 bmcr, advert, tmp;
+
+ mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
+ mii->advertising = tmp;
+ }
-+
++
+ /* turn on autonegotiation, and force a renegotiate */
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/kcompat.h linux-2.6.22-10/drivers/net/e1000e/kcompat.h
--- linux-2.6.22-0/drivers/net/e1000e/kcompat.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/kcompat.h 2008-11-10 17:29:48.000000000 +0100
-@@ -0,0 +1,1629 @@
++++ linux-2.6.22-10/drivers/net/e1000e/kcompat.h 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,1704 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+#include <linux/mii.h>
+#include <asm/io.h>
+
-+#define DRIVER_E1000E
-+
+/* NAPI enable/disable flags here */
-+
-+#ifdef DRIVER_E1000E
+#define NAPI
-+#endif
-+
-+#ifdef _E1000_H_
-+#ifdef CONFIG_E1000_NAPI
-+#define NAPI
-+#endif
-+#ifdef E1000_NAPI
-+#undef NAPI
-+#define NAPI
-+#endif
-+#ifdef E1000E_NAPI
-+#undef NAPI
-+#define NAPI
-+#endif
-+#ifdef E1000_NO_NAPI
-+#undef NAPI
-+#endif
+#ifdef E1000E_NO_NAPI
+#undef NAPI
+#endif
-+#endif
-+
-+
-+
+
-+
-+
-+#ifdef DRIVER_E1000E
+#define adapter_struct e1000_adapter
+#define CONFIG_E1000E_MSIX
-+#endif
-+
-+
-+
+
+/* and finally set defines so that the code sees the changes */
+#ifdef NAPI
-+#ifndef CONFIG_E1000_NAPI
-+#define CONFIG_E1000_NAPI
-+#endif
+#ifndef CONFIG_E1000E_NAPI
+#define CONFIG_E1000E_NAPI
+#endif
+#else
-+#undef CONFIG_E1000_NAPI
+#undef CONFIG_E1000E_NAPI
-+#undef CONFIG_IXGB_NAPI
-+#endif
-+
-+/* packet split disable/enable */
-+#ifdef DISABLE_PACKET_SPLIT
-+#undef CONFIG_E1000_DISABLE_PACKET_SPLIT
-+#define CONFIG_E1000_DISABLE_PACKET_SPLIT
-+#undef CONFIG_IGB_DISABLE_PACKET_SPLIT
-+#define CONFIG_IGB_DISABLE_PACKET_SPLIT
-+#endif
++#endif /* NAPI */
+
+/* MSI compatibility code for all kernels and drivers */
+#ifdef DISABLE_PCI_MSI
+#define PCI_CAP_ID_EXP 0x10
+#endif
+
++#ifndef PCIE_LINK_STATE_L0S
++#define PCIE_LINK_STATE_L0S 1
++#endif
++
+#ifndef mmiowb
+#ifdef CONFIG_IA64
+#define mmiowb() asm volatile ("mf.a" ::: "memory")
+#endif
+#endif
+
-+#ifndef IRQ_HANDLED
-+#define irqreturn_t void
-+#define IRQ_HANDLED
-+#define IRQ_NONE
-+#endif
-+
+#ifndef SET_NETDEV_DEV
+#define SET_NETDEV_DEV(net, pdev)
+#endif
+#define gso_segs tso_segs
+#endif
+
++#ifndef NETIF_F_GRO
++#define vlan_gro_receive(_napi, _vlgrp, _vlan, _skb) \
++ vlan_hwaccel_receive_skb(_skb, _vlgrp, _vlan)
++#define napi_gro_receive(_napi, _skb) netif_receive_skb(_skb)
++#endif
++
+#ifndef CHECKSUM_PARTIAL
+#define CHECKSUM_PARTIAL CHECKSUM_HW
+#define CHECKSUM_COMPLETE CHECKSUM_HW
+extern int _kc_pci_set_power_state(struct pci_dev *dev, int state);
+#endif
+
-+#ifndef pci_save_state
-+#define pci_save_state _kc_pci_save_state
-+extern int _kc_pci_save_state(struct pci_dev *dev, u32 *buffer);
-+#endif
-+
-+#ifndef pci_restore_state
-+#define pci_restore_state _kc_pci_restore_state
-+extern int _kc_pci_restore_state(struct pci_dev *pdev, u32 *buffer);
-+#endif
-+
+#ifndef pci_enable_wake
+#define pci_enable_wake _kc_pci_enable_wake
+extern int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable);
+ (void) (&_x == &_y); \
+ _x > _y ? _x : _y; })
+
++#define min_t(type,x,y) ({ \
++ type _x = (x); \
++ type _y = (y); \
++ _x < _y ? _x : _y; })
++
++#define max_t(type,x,y) ({ \
++ type _x = (x); \
++ type _y = (y); \
++ _x > _y ? _x : _y; })
++
+#ifndef list_for_each_safe
+#define list_for_each_safe(pos, n, head) \
+ for (pos = (head)->next, n = pos->next; pos != (head); \
+
+/* we won't support NAPI on less than 2.4.20 */
+#ifdef NAPI
-+#undef CONFIG_E1000_NAPI
+#undef CONFIG_E1000E_NAPI
-+#undef CONFIG_IXGB_NAPI
+#endif
+
+#endif /* 2.4.20 => 2.4.19 */
++
+/*****************************************************************************/
-+/* 2.4.22 => 2.4.17 */
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) )
-+#define pci_name(x) ((x)->slot_name)
-+#endif
++/* < 2.4.21 */
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,21) )
++#define skb_pad(x,y) _kc_skb_pad(x, y)
++struct sk_buff * _kc_skb_pad(struct sk_buff *skb, int pad);
++#endif /* < 2.4.21 */
+
+/*****************************************************************************/
+/* 2.4.22 => 2.4.17 */
-+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) )
++#define pci_name(x) ((x)->slot_name)
+#endif
+
+/*****************************************************************************/
+
+#define dev_err(__unused_dev, format, arg...) \
+ printk(KERN_ERR "%s: " format, pci_name(adapter->pdev) , ## arg)
++#define dev_warn(__unused_dev, format, arg...) \
++ printk(KERN_WARNING "%s: " format, pci_name(pdev) , ## arg)
+
+/* hlist_* code - double linked lists */
+struct hlist_head {
+#define container_of list_entry
+#define schedule_work schedule_task
+#define flush_scheduled_work flush_scheduled_tasks
++#define cancel_work_sync(x) flush_scheduled_work()
+
+#endif /* 2.5.28 => 2.4.17 */
+
+#undef ALIGN
+#define ALIGN(x,a) (((x)+(a)-1)&~((a)-1))
+
++#ifndef page_count
++#define page_count(p) atomic_read(&(p)->count)
++#endif
++
+/* find_first_bit and find_next bit are not defined for most
+ * 2.4 kernels (except for the redhat 2.4.21 kernels
+ */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) )
++#ifndef PCI_EXP_DEVCTL
++#define PCI_EXP_DEVCTL 8
++#endif
++#ifndef PCI_EXP_DEVCTL_CERE
++#define PCI_EXP_DEVCTL_CERE 0x0001
++#endif
+#define msleep(x) do { set_current_state(TASK_UNINTERRUPTIBLE); \
+ schedule_timeout((x * HZ)/1000 + 2); \
+ } while (0)
+/* Basic mode control register. */
+#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
+
++#ifndef __le16
++#define __le16 u16
++#endif
++#ifndef __le32
++#define __le32 u32
++#endif
++#ifndef __le64
++#define __le64 u64
++#endif
++
+#ifdef pci_dma_mapping_error
+#undef pci_dma_mapping_error
+#endif
+#endif /* < 2.6.9 */
+
+/*****************************************************************************/
-+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) && \
-+ LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) )
-+#ifdef pci_save_state
-+#undef pci_save_state
-+#endif
-+#define pci_save_state(X) { \
-+ int i; \
-+ if (adapter->pci_state) { \
-+ for (i = 0; i < 16; i++) { \
-+ pci_read_config_dword((X), \
-+ i * 4, \
-+ &adapter->pci_state[i]); \
-+ } \
-+ } \
-+}
-+
-+#ifdef pci_restore_state
-+#undef pci_restore_state
-+#endif
-+#define pci_restore_state(X) { \
-+ int i; \
-+ if (adapter->pci_state) { \
-+ for (i = 0; i < 16; i++) { \
-+ pci_write_config_dword((X), \
-+ i * 4, \
-+ adapter->pci_state[i]); \
-+ } \
-+ } else { \
-+ for (i = 0; i < 6; i++) { \
-+ pci_write_config_dword((X), \
-+ PCI_BASE_ADDRESS_0 + (i * 4), \
-+ (X)->resource[i].start); \
-+ } \
-+ } \
-+}
-+#endif /* 2.4.6 <= x < 2.6.10 */
-+
-+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) )
+#ifdef module_param_array_named
+#undef module_param_array_named
+#define PCI_D2 2
+#define PCI_D3hot 3
+#define PCI_D3cold 4
++typedef int pci_power_t;
+#define pci_choose_state(pdev,state) state
+#define PMSG_SUSPEND 3
++#define PCI_EXP_LNKCTL 16
+
+#undef NETIF_F_LLTX
+
+#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymmetric pause */
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
-+#endif
++#endif /* < 2.6.12 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) )
+/* Extended status register. */
+#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */
+#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */
++#endif /* < 2.6.14 */
++
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) )
++#ifndef device_can_wakeup
++#define device_can_wakeup(dev) (1)
++#endif
++#ifndef device_set_wakeup_enable
++#define device_set_wakeup_enable(dev, val) do{}while(0)
+#endif
++#ifndef device_init_wakeup
++#define device_init_wakeup(dev,val) do {} while (0)
++#endif
++#endif /* < 2.6.15 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) )
++#define DEFINE_MUTEX(x) DECLARE_MUTEX(x)
++#define mutex_lock(x) down_interruptible(x)
++#define mutex_unlock(x) up(x)
++
+#undef HAVE_PCI_ERS
+#else /* 2.6.16 and above */
+#undef HAVE_PCI_ERS
+#define HAVE_PCI_ERS
-+#endif
++#endif /* < 2.6.16 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) )
+
++#ifndef IRQ_HANDLED
++#define irqreturn_t void
++#define IRQ_HANDLED
++#define IRQ_NONE
++#endif
++
+#ifndef IRQF_PROBE_SHARED
+#ifdef SA_PROBEIRQ
+#define IRQF_PROBE_SHARED SA_PROBEIRQ
+#ifndef DIV_ROUND_UP
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+#endif
-+
+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) )
+#ifndef RHEL_RELEASE_CODE
+#define RHEL_RELEASE_CODE 0
+#if (!(( RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,4) ) && ( RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0) ) || ( RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,0) ) || (AX_RELEASE_CODE > AX_RELEASE_VERSION(3,0))))
+typedef irqreturn_t (*irq_handler_t)(int, void*, struct pt_regs *);
+#endif
++#if (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0))
++#undef CONFIG_INET_LRO
++#undef CONFIG_INET_LRO_MODULE
++#ifdef IXGBE_FCOE
++#undef CONFIG_FCOE
++#undef CONFIG_FCOE_MODULE
++#endif /* IXGBE_FCOE */
++#endif
+typedef irqreturn_t (*new_handler_t)(int, void*);
+static inline irqreturn_t _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id)
+#else /* 2.4.x */
+typedef void (*irq_handler_t)(int, void*, struct pt_regs *);
+typedef void (*new_handler_t)(int, void*);
+static inline int _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id)
-+#endif
++#endif /* >= 2.5.x */
+{
+ irq_handler_t new_handler = (irq_handler_t) handler;
+ return request_irq(irq, new_handler, flags, devname, dev_id);
+#define request_irq(irq, handler, flags, devname, dev_id) _kc_request_irq((irq), (handler), (flags), (devname), (dev_id))
+
+#define irq_handler_t new_handler_t
-+
+/* pci_restore_state and pci_save_state handles MSI/PCIE from 2.6.19 */
+#define PCIE_CONFIG_SPACE_LEN 256
+#define PCI_CONFIG_SPACE_LEN 64
+#define PCIE_LINK_STATUS 0x12
-+#ifdef DRIVER_E1000E
+#define pci_config_space_ich8lan() { \
+ if (adapter->flags & FLAG_IS_ICH) \
+ size = PCIE_CONFIG_SPACE_LEN; \
+}
-+#else
-+#define pci_config_space_ich8lan()
-+#endif
+#undef pci_save_state
-+#define pci_save_state(pdev) _kc_pci_save_state(adapter)
-+#define _kc_pci_save_state(adapter) 0; { \
-+ int size = PCI_CONFIG_SPACE_LEN, i; \
-+ u16 pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP); \
-+ u16 pcie_link_status; \
-+ \
-+ if (pcie_cap_offset) { \
-+ if (!pci_read_config_word(pdev, pcie_cap_offset + PCIE_LINK_STATUS, \
-+ &pcie_link_status)) \
-+ size = PCIE_CONFIG_SPACE_LEN; \
-+ } \
-+ pci_config_space_ich8lan(); \
-+ WARN_ON(adapter->config_space != NULL); \
-+ adapter->config_space = kmalloc(size, GFP_KERNEL); \
-+ if (!adapter->config_space) { \
-+ printk(KERN_ERR "Out of memory in pci_save_state\n"); \
-+ return -ENOMEM; \
-+ } \
-+ for (i = 0; i < (size / 4); i++) \
-+ pci_read_config_dword(pdev, i * 4, &adapter->config_space[i]); \
-+}
++extern int _kc_pci_save_state(struct pci_dev *);
++#define pci_save_state(pdev) _kc_pci_save_state(pdev)
+#undef pci_restore_state
-+#define pci_restore_state(pdev) _kc_pci_restore_state(adapter)
-+#define _kc_pci_restore_state(adapter) { \
-+ int size = PCI_CONFIG_SPACE_LEN, i; \
-+ u16 pcie_cap_offset; \
-+ u16 pcie_link_status; \
-+ \
-+ if (adapter->config_space != NULL) { \
-+ pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP); \
-+ if (pcie_cap_offset) { \
-+ if (!pci_read_config_word(pdev, pcie_cap_offset + PCIE_LINK_STATUS, \
-+ &pcie_link_status)) \
-+ size = PCIE_CONFIG_SPACE_LEN; \
-+ } \
-+ pci_config_space_ich8lan(); \
-+ for (i = 0; i < (size / 4); i++) \
-+ pci_write_config_dword(pdev, i * 4, adapter->config_space[i]); \
-+ kfree(adapter->config_space); \
-+ adapter->config_space = NULL; \
-+ } \
++extern void _kc_pci_restore_state(struct pci_dev *);
++#define pci_restore_state(pdev) _kc_pci_restore_state(pdev)
++#ifdef HAVE_PCI_ERS
++#undef free_netdev
++extern void _kc_free_netdev(struct net_device *);
++#define free_netdev(netdev) _kc_free_netdev(netdev)
++#endif
++static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
++{
++ return 0;
+}
-+
++#define pci_disable_pcie_error_reporting(dev) do {} while (0)
++#define pci_cleanup_aer_uncorrect_error_status(dev) do {} while (0)
++#else /* 2.6.19 */
++#include <linux/aer.h>
+#endif /* < 2.6.19 */
++
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) )
+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28) )
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) )
++#define to_net_dev(class) container_of(class, struct net_device, class_dev)
++#define NETDEV_CLASS_DEV
+#define vlan_group_get_device(vg, id) (vg->vlan_devices[id])
+#define vlan_group_set_device(vg, id, dev) if (vg) vg->vlan_devices[id] = dev;
+#define pci_channel_offline(pdev) (pdev->error_state && \
+ pdev->error_state != pci_channel_io_normal)
++#define pci_request_selected_regions(pdev, bars, name) \
++ pci_request_regions(pdev, name)
++#define pci_release_selected_regions(pdev, bars) pci_release_regions(pdev);
+#endif /* < 2.6.21 */
+
+/*****************************************************************************/
+#ifndef ETH_FCS_LEN
+#define ETH_FCS_LEN 4
+#endif
++#define cancel_work_sync(x) flush_scheduled_work()
++#ifndef udp_hdr
++#define udp_hdr _udp_hdr
++static inline struct udphdr *_udp_hdr(const struct sk_buff *skb)
++{
++ return (struct udphdr *)skb_transport_header(skb);
++}
++#endif
+#endif /* < 2.6.22 */
+
+/*****************************************************************************/
+#endif /* > 2.6.22 */
+
+/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) )
++#define netif_subqueue_stopped(_a, _b) 0
++#endif /* < 2.6.23 */
++
++/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) )
+/* NAPI API changes in 2.6.24 break everything */
+struct napi_struct {
+ /* used to look up the real NAPI polling routine */
+ int (*poll)(struct napi_struct *, int);
++ struct net_device poll_dev;
+ int weight;
+};
+#ifdef NAPI
+extern int __kc_adapter_clean(struct net_device *, int *);
-+#define netif_rx_complete(netdev, napi) netif_rx_complete(netdev)
-+#define netif_rx_schedule_prep(netdev, napi) netif_rx_schedule_prep(netdev)
-+#define netif_rx_schedule(netdev, napi) netif_rx_schedule(netdev)
-+#define __netif_rx_schedule(netdev, napi) __netif_rx_schedule(netdev)
++extern struct net_device * napi_to_netdev(struct napi_struct *);
++#define napi_to_poll_dev(napi) napi_to_netdev(napi)
+#define napi_enable(napi) netif_poll_enable(adapter->netdev)
+#define napi_disable(napi) netif_poll_disable(adapter->netdev)
+#define netif_napi_add(_netdev, _napi, _poll, _weight) \
+ do { \
-+ struct napi_struct *__napi = _napi; \
++ struct napi_struct *__napi = (_napi); \
+ _netdev->poll = &(__kc_adapter_clean); \
+ _netdev->weight = (_weight); \
+ __napi->poll = &(_poll); \
+ __napi->weight = (_weight); \
+ netif_poll_disable(_netdev); \
+ } while (0)
++#define netif_napi_del(_a) do {} while (0)
++#define napi_schedule_prep(napi) netif_rx_schedule_prep(napi_to_netdev(napi))
++#define napi_schedule(napi) netif_rx_schedule(napi_to_poll_dev(napi))
++#define __napi_schedule(napi) __netif_rx_schedule(napi_to_poll_dev(napi))
++#define napi_complete(napi) netif_rx_complete(napi_to_poll_dev(napi))
+#else /* NAPI */
+#define netif_napi_add(_netdev, _napi, _poll, _weight) \
+ do { \
+ __napi->poll = &(_poll); \
+ __napi->weight = (_weight); \
+ } while (0)
++#define netif_napi_del(_a) do {} while (0)
+#endif /* NAPI */
+
+#undef dev_get_by_name
+#define dev_get_by_name(_a, _b) dev_get_by_name(_b)
+#define __netif_subqueue_stopped(_a, _b) netif_subqueue_stopped(_a, _b)
++#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
++#else /* < 2.6.24 */
++#define HAVE_NETDEV_NAPI_LIST
+#endif /* < 2.6.24 */
+
+/*****************************************************************************/
+}
+#endif /* > 2.6.18 */
+
++#define pci_enable_device_mem(pdev) pci_enable_device(pdev)
++
+#endif /* < 2.6.25 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) )
++#else /* < 2.6.26 */
++#include <linux/pci-aspm.h>
++#define HAVE_NETDEV_VLAN_FEATURES
+#endif /* < 2.6.26 */
-+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) )
++#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) )
++#if (((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) && defined(CONFIG_PM)) || ((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) && defined(CONFIG_PM_SLEEP)))
++#undef device_set_wakeup_enable
++#define device_set_wakeup_enable(dev, val) \
++ do { \
++ u16 pmc = 0; \
++ int pm = pci_find_capability(adapter->pdev, PCI_CAP_ID_PM); \
++ if (pm) { \
++ pci_read_config_word(adapter->pdev, pm + PCI_PM_PMC, \
++ &pmc); \
++ } \
++ (dev)->power.can_wakeup = !!(pmc >> 11); \
++ (dev)->power.should_wakeup = (val && (pmc >> 11)); \
++ } while (0)
++#endif /* 2.6.15-2.6.22 and CONFIG_PM or 2.6.23-2.6.25 and CONFIG_PM_SLEEP */
++#endif /* 2.6.15 through 2.6.27 */
++#ifndef netif_napi_del
++#define netif_napi_del(_a) do {} while (0)
++#ifdef NAPI
++#ifdef CONFIG_NETPOLL
++#undef netif_napi_del
++#define netif_napi_del(_a) list_del(&(_a)->dev_list);
++#endif
++#endif
++#endif /* netif_napi_del */
+#ifndef pci_dma_mapping_error
+#define pci_dma_mapping_error(pdev, dma_addr) pci_dma_mapping_error(dma_addr)
+#endif
-+#endif /* < 2.6.27 */
+
++
++#ifdef HAVE_TX_MQ
++extern void _kc_netif_tx_stop_all_queues(struct net_device *);
++extern void _kc_netif_tx_wake_all_queues(struct net_device *);
++extern void _kc_netif_tx_start_all_queues(struct net_device *);
++#define netif_tx_stop_all_queues(a) _kc_netif_tx_stop_all_queues(a)
++#define netif_tx_wake_all_queues(a) _kc_netif_tx_wake_all_queues(a)
++#define netif_tx_start_all_queues(a) _kc_netif_tx_start_all_queues(a)
++#undef netif_stop_subqueue
++#define netif_stop_subqueue(_ndev,_qi) do { \
++ if (netif_is_multiqueue((_ndev))) \
++ netif_stop_subqueue((_ndev), (_qi)); \
++ else \
++ netif_stop_queue((_ndev)); \
++ } while (0)
++#undef netif_start_subqueue
++#define netif_start_subqueue(_ndev,_qi) do { \
++ if (netif_is_multiqueue((_ndev))) \
++ netif_start_subqueue((_ndev), (_qi)); \
++ else \
++ netif_start_queue((_ndev)); \
++ } while (0)
++#else /* HAVE_TX_MQ */
++#define netif_tx_stop_all_queues(a) netif_stop_queue(a)
++#define netif_tx_wake_all_queues(a) netif_wake_queue(a)
++#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) )
++#define netif_tx_start_all_queues(a) netif_start_queue(a)
++#else
++#define netif_tx_start_all_queues(a) do {} while (0)
++#endif
++#define netif_stop_subqueue(_ndev,_qi) netif_stop_queue((_ndev))
++#define netif_start_subqueue(_ndev,_qi) netif_start_queue((_ndev))
++#endif /* HAVE_TX_MQ */
+#ifndef NETIF_F_MULTI_QUEUE
+#define NETIF_F_MULTI_QUEUE 0
+#define netif_is_multiqueue(a) 0
-+#define netif_stop_subqueue(a, b)
+#define netif_wake_subqueue(a, b)
-+#define netif_start_subqueue(a, b)
+#endif /* NETIF_F_MULTI_QUEUE */
++#else /* < 2.6.27 */
++#define HAVE_TX_MQ
++#define HAVE_NETDEV_SELECT_QUEUE
++#endif /* < 2.6.27 */
++
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) )
++#define pci_ioremap_bar(pdev, bar) ioremap(pci_resource_start(pdev, bar), \
++ pci_resource_len(pdev, bar))
++#define pci_wake_from_d3 _kc_pci_wake_from_d3
++#define pci_prepare_to_sleep _kc_pci_prepare_to_sleep
++extern int _kc_pci_wake_from_d3(struct pci_dev *dev, bool enable);
++extern int _kc_pci_prepare_to_sleep(struct pci_dev *dev);
++#endif /* < 2.6.28 */
++
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29) )
++#define pci_request_selected_regions_exclusive(pdev, bars, name) \
++ pci_request_selected_regions(pdev, bars, name)
++#else /* < 2.6.29 */
++#ifdef CONFIG_DCB
++#define HAVE_PFC_MODE_ENABLE
++#endif /* CONFIG_DCB */
++#endif /* < 2.6.29 */
++
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) )
++#ifdef IXGBE_FCOE
++#undef CONFIG_FCOE
++#undef CONFIG_FCOE_MODULE
++#endif /* IXGBE_FCOE */
++extern u16 _kc_skb_tx_hash(struct net_device *dev, struct sk_buff *skb);
++#define skb_tx_hash(n, s) _kc_skb_tx_hash(n, s)
++#else
++#define HAVE_ASPM_QUIRKS
++#endif /* < 2.6.30 */
+
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) )
++#else
++#ifndef HAVE_NETDEV_STORAGE_ADDRESS
++#define HAVE_NETDEV_STORAGE_ADDRESS
++#endif
++#endif /* < 2.6.31 */
+#endif /* _KCOMPAT_H_ */
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/Makefile linux-2.6.22-10/drivers/net/e1000e/Makefile
--- linux-2.6.22-0/drivers/net/e1000e/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/Makefile 2008-11-10 00:06:14.000000000 +0100
++++ linux-2.6.22-10/drivers/net/e1000e/Makefile 2009-08-27 23:56:36.000000000 +0200
@@ -0,0 +1,33 @@
+################################################################################
+#
+# Intel PRO/1000 Linux driver
-+# Copyright(c) 1999 - 2008 Intel Corporation.
++# Copyright(c) 1999 - 2009 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+ e1000_phy.o e1000_manage.o kcompat.o
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/netdev.c linux-2.6.22-10/drivers/net/e1000e/netdev.c
--- linux-2.6.22-0/drivers/net/e1000e/netdev.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/netdev.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,5637 @@
++++ linux-2.6.22-10/drivers/net/e1000e/netdev.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,6007 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+#include "e1000.h"
+
+#ifdef CONFIG_E1000E_NAPI
-+#define DRV_NAPI "-NAPI"
++#define DRV_EXTRAVERSION "-NAPI"
+#else
-+#define DRV_NAPI
++#define DRV_EXTRAVERSION
+#endif
+
-+#define DRV_DEBUG
-+
-+#define DRV_VERSION "0.4.1.12" DRV_NAPI DRV_DEBUG
++#define DRV_VERSION "1.0.2.5" DRV_EXTRAVERSION
+char e1000e_driver_name[] = "e1000e";
+const char e1000e_driver_version[] = DRV_VERSION;
+
+
+ case e1000_82573:
+ if (pdev->device == E1000_DEV_ID_82573L) {
-+ adapter->hw.nvm.ops.read(&adapter->hw, NVM_INIT_3GIO_3,
-+ 1, &eeprom_data);
-+ if (!(eeprom_data & NVM_WORD1A_ASPM_MASK))
++ if (e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1,
++ &eeprom_data) < 0)
++ break;
++ if (!(eeprom_data & NVM_WORD1A_ASPM_MASK)) {
+ adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
++ adapter->max_hw_frame_size = DEFAULT_JUMBO;
++ }
+ }
+ break;
+
+ | FLAG_TARC_SPEED_MODE_BIT /* errata */
+ | FLAG_APME_CHECK_PORT_B,
+ .pba = 38,
++ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_82571,
+ .get_variants = e1000_get_variants_82571,
+};
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_TARC_SPEED_MODE_BIT, /* errata */
+ .pba = 38,
++ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_82571,
+ .get_variants = e1000_get_variants_82571,
+};
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT
-+ | FLAG_HAS_ASPM
+ | FLAG_HAS_ERT
+ | FLAG_HAS_SWSM_ON_LOAD,
+ .pba = 20,
++ .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .init_ops = e1000_init_function_pointers_82571,
+ .get_variants = e1000_get_variants_82571,
+};
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT
-+ | FLAG_HAS_ASPM
+ | FLAG_HAS_CTRLEXT_ON_LOAD,
+ .pba = 20,
++ .max_hw_frame_size = DEFAULT_JUMBO,
++ .init_ops = e1000_init_function_pointers_82571,
++ .get_variants = e1000_get_variants_82571,
++};
++
++static struct e1000_info e1000_82583_info = {
++ .mac = e1000_82583,
++ .flags = FLAG_HAS_HW_VLAN_FILTER
++ | FLAG_HAS_WOL
++ | FLAG_APME_IN_CTRL3
++ | FLAG_RX_CSUM_ENABLED
++ | FLAG_HAS_SMART_POWER_DOWN
++ | FLAG_HAS_AMT
++ | FLAG_HAS_CTRLEXT_ON_LOAD,
++ .pba = 20,
++ .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .init_ops = e1000_init_function_pointers_82571,
+ .get_variants = e1000_get_variants_82571,
+};
+ | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
+ | FLAG_TIPG_MEDIUM_FOR_80003ESLAN,
+ .pba = 38,
++ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_80003es2lan,
+ .get_variants = NULL,
+};
+
+static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
+{
-+ if (adapter->hw.phy.type == e1000_phy_ife)
++ if (adapter->hw.phy.type == e1000_phy_ife) {
+ adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
++ adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
++ }
+
+ if ((adapter->hw.mac.type == e1000_ich8lan) &&
+ (adapter->hw.phy.type == e1000_phy_igp_3))
+ | FLAG_HAS_FLASH
+ | FLAG_APME_IN_WUC,
+ .pba = 8,
++ .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .init_ops = e1000_init_function_pointers_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
+};
+ | FLAG_HAS_FLASH
+ | FLAG_APME_IN_WUC,
+ .pba = 10,
++ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
+};
+ | FLAG_HAS_FLASH
+ | FLAG_APME_IN_WUC,
+ .pba = 10,
++ .max_hw_frame_size = DEFAULT_JUMBO,
++ .init_ops = e1000_init_function_pointers_ich8lan,
++ .get_variants = e1000_get_variants_ich8lan,
++};
++
++static struct e1000_info e1000_pch_info = {
++ .mac = e1000_pchlan,
++ .flags = FLAG_IS_ICH
++ | FLAG_HAS_WOL
++ | FLAG_RX_CSUM_ENABLED
++ | FLAG_HAS_CTRLEXT_ON_LOAD
++ | FLAG_HAS_AMT
++ | FLAG_HAS_FLASH
++ | FLAG_HAS_JUMBO_FRAMES
++ | FLAG_APME_IN_WUC,
++ .pba = 26,
++ .max_hw_frame_size = 4096,
+ .init_ops = e1000_init_function_pointers_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
+};
+ [board_82572] = &e1000_82572_info,
+ [board_82573] = &e1000_82573_info,
+ [board_82574] = &e1000_82574_info,
++ [board_82583] = &e1000_82583_info,
+ [board_80003es2lan] = &e1000_es2_info,
+ [board_ich8lan] = &e1000_ich8_info,
+ [board_ich9lan] = &e1000_ich9_info,
+ [board_ich10lan] = &e1000_ich10_info,
++ [board_pchlan] = &e1000_pch_info,
+};
+
-+
-+void e1000_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
-+{
-+ struct e1000_adapter *adapter = hw->back;
-+
-+ pci_read_config_word(adapter->pdev, reg, value);
-+}
-+
-+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
-+{
-+ struct e1000_adapter *adapter = hw->back;
-+ u16 cap_offset;
-+
-+ cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
-+ if (!cap_offset)
-+ return -E1000_ERR_CONFIG;
-+
-+ pci_read_config_word(adapter->pdev, cap_offset + reg, value);
-+
-+ return E1000_SUCCESS;
-+}
-+
-+s32 e1000_alloc_zeroed_dev_spec_struct(struct e1000_hw *hw, u32 size)
-+{
-+ hw->dev_spec = kzalloc(size, GFP_KERNEL);
-+
-+ if (!hw->dev_spec)
-+ return -ENOMEM;
-+
-+ return E1000_SUCCESS;
-+}
-+
-+void e1000_free_dev_spec_struct(struct e1000_hw *hw)
-+{
-+ if (!hw->dev_spec)
-+ return;
-+
-+ kfree(hw->dev_spec);
-+}
-+
+/**
+ * e1000_desc_unused - calculate if we have unused descriptors
+ **/
+static void e1000_receive_skb(struct e1000_adapter *adapter,
+ struct net_device *netdev,
+ struct sk_buff *skb,
-+ u8 status, u16 vlan)
++ u8 status, __le16 vlan)
+{
++#ifndef CONFIG_E1000E_NAPI
++ int ret;
++
++#endif
+ skb->protocol = eth_type_trans(skb, netdev);
+
+#ifdef CONFIG_E1000E_NAPI
+ if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
-+ le16_to_cpu(vlan) &
-+ E1000_RXD_SPC_VLAN_MASK);
++ le16_to_cpu(vlan));
+ else
++#ifdef NETIF_F_GRO
++ napi_gro_receive(&adapter->napi, skb);
++#else
+ netif_receive_skb(skb);
++#endif /* NETIF_F_GRO */
+#else
+ if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
-+ vlan_hwaccel_rx(skb, adapter->vlgrp,
-+ le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK);
++ ret = vlan_hwaccel_rx(skb, adapter->vlgrp, le16_to_cpu(vlan));
+ else
-+ netif_rx(skb);
++ ret = netif_rx(skb);
++ if (unlikely(ret == NET_RX_DROP))
++ adapter->rx_dropped_backlog++;
+#endif
++#ifndef NETIF_F_GRO
+
+ netdev->last_rx = jiffies;
++#endif
+}
+
+/**
+ ps_page = &buffer_info->ps_pages[j];
+ if (j >= adapter->rx_ps_pages) {
+ /* all unused desc entries get hw null ptr */
-+ rx_desc->read.buffer_addr[j+1] = ~0;
++ rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
+ continue;
+ }
+ if (!ps_page->page) {
+/**
+ * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
+ * @adapter: address of board private structure
-+ * @rx_ring: pointer to receive ring structure
+ * @cleaned_count: number of buffers to allocate this pass
+ **/
+
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
++ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ goto next_desc;
+ }
+
++ /* adjust length to remove Ethernet CRC */
++ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
++ length -= 4;
++
+ total_rx_bytes += length;
+ total_rx_packets++;
+
+ if (new_skb) {
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ skb_copy_to_linear_data_offset(new_skb,
-+ -NET_IP_ALIGN,
-+ (skb->data -
-+ NET_IP_ALIGN),
-+ (length +
-+ NET_IP_ALIGN));
++ -NET_IP_ALIGN,
++ (skb->data -
++ NET_IP_ALIGN),
++ (length +
++ NET_IP_ALIGN));
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = skb;
+ skb = new_skb;
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
-+ e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
++ e1000_receive_skb(adapter, netdev, skb, status, rx_desc->special);
+
+next_desc:
+ rx_desc->status = 0;
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, cleaned_count);
+
-+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
++ adapter->total_rx_packets += total_rx_packets;
+ adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
-+ * @e1000_alloc_ring - allocate memory for a ring structure
-+ **/
-+static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
-+ struct e1000_ring *ring)
-+{
-+ struct pci_dev *pdev = adapter->pdev;
-+
-+ ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
-+ GFP_KERNEL);
-+ if (!ring->desc)
-+ return -ENOMEM;
-+
-+ return 0;
-+}
-+
-+/**
-+ * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
-+ * @adapter: board private structure
-+ *
-+ * Return 0 on success, negative on failure
-+ **/
-+int e1000_setup_tx_resources(struct e1000_adapter *adapter)
-+{
-+ struct e1000_ring *tx_ring = adapter->tx_ring;
-+ int err = -ENOMEM, size;
-+
-+ size = sizeof(struct e1000_buffer) * tx_ring->count;
-+ tx_ring->buffer_info = vmalloc(size);
-+ if (!tx_ring->buffer_info)
-+ goto err;
-+ memset(tx_ring->buffer_info, 0, size);
-+
-+ /* round up to nearest 4K */
-+ tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
-+ tx_ring->size = ALIGN(tx_ring->size, 4096);
-+
-+ err = e1000_alloc_ring_dma(adapter, tx_ring);
-+ if (err)
-+ goto err;
-+
-+ tx_ring->next_to_use = 0;
-+ tx_ring->next_to_clean = 0;
-+ spin_lock_init(&adapter->tx_queue_lock);
-+
-+ return 0;
-+err:
-+ vfree(tx_ring->buffer_info);
-+ e_err("Unable to allocate memory for the transmit descriptor ring\n");
-+ return err;
-+}
-+
-+/**
-+ * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
++ * e1000_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ *
-+ * Returns 0 on success, negative on failure
-+ **/
-+int e1000_setup_rx_resources(struct e1000_adapter *adapter)
-+{
-+ struct e1000_ring *rx_ring = adapter->rx_ring;
-+ struct e1000_buffer *buffer_info;
-+ int i, size, desc_len, err = -ENOMEM;
-+
-+ size = sizeof(struct e1000_buffer) * rx_ring->count;
-+ rx_ring->buffer_info = vmalloc(size);
-+ if (!rx_ring->buffer_info)
-+ goto err;
-+ memset(rx_ring->buffer_info, 0, size);
-+
-+ for (i = 0; i < rx_ring->count; i++) {
-+ buffer_info = &rx_ring->buffer_info[i];
-+ buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
-+ sizeof(struct e1000_ps_page),
-+ GFP_KERNEL);
-+ if (!buffer_info->ps_pages)
-+ goto err_pages;
-+ }
-+
-+ desc_len = sizeof(union e1000_rx_desc_packet_split);
-+
-+ /* Round up to nearest 4K */
-+ rx_ring->size = rx_ring->count * desc_len;
-+ rx_ring->size = ALIGN(rx_ring->size, 4096);
-+
-+ err = e1000_alloc_ring_dma(adapter, rx_ring);
-+ if (err)
-+ goto err_pages;
-+
-+ rx_ring->next_to_clean = 0;
-+ rx_ring->next_to_use = 0;
-+ rx_ring->rx_skb_top = NULL;
-+
-+ return 0;
-+
-+err_pages:
-+ for (i = 0; i < rx_ring->count; i++) {
-+ buffer_info = &rx_ring->buffer_info[i];
-+ kfree(buffer_info->ps_pages);
-+ }
-+err:
-+ vfree(rx_ring->buffer_info);
-+ e_err("Unable to allocate memory for the transmit descriptor ring\n");
-+ return err;
-+}
-+
-+/**
-+ * e1000_clean_tx_ring - Free Tx Buffers
-+ * @adapter: board private structure
++ * the return value indicates if there is more work to do (later)
+ **/
-+static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
++static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
+{
++ struct net_device *netdev = adapter->netdev;
++ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
++ struct e1000_tx_desc *tx_desc, *eop_desc;
+ struct e1000_buffer *buffer_info;
-+ unsigned long size;
-+ unsigned int i;
++ unsigned int i, eop;
++ bool cleaned = 0, retval = 1;
++ unsigned int total_tx_bytes = 0, total_tx_packets = 0;
+
-+ for (i = 0; i < tx_ring->count; i++) {
-+ buffer_info = &tx_ring->buffer_info[i];
-+ e1000_put_txbuf(adapter, buffer_info);
-+ }
++ i = tx_ring->next_to_clean;
++ eop = tx_ring->buffer_info[i].next_to_watch;
++ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
-+ size = sizeof(struct e1000_buffer) * tx_ring->count;
-+ memset(tx_ring->buffer_info, 0, size);
++ while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
++ for (cleaned = 0; !cleaned; ) {
++ tx_desc = E1000_TX_DESC(*tx_ring, i);
++ buffer_info = &tx_ring->buffer_info[i];
++ cleaned = (i == eop);
+
-+ memset(tx_ring->desc, 0, tx_ring->size);
++ if (cleaned) {
++ struct sk_buff *skb = buffer_info->skb;
++#ifdef NETIF_F_TSO
++ unsigned int segs, bytecount;
++ segs = skb_shinfo(skb)->gso_segs ?: 1;
++ /* multiply data chunks by size of headers */
++ bytecount = ((segs - 1) * skb_headlen(skb)) +
++ skb->len;
++ total_tx_packets += segs;
++ total_tx_bytes += bytecount;
++#else
++ total_tx_packets++;
++ total_tx_bytes += skb->len;
++#endif
++ }
+
-+ tx_ring->next_to_use = 0;
-+ tx_ring->next_to_clean = 0;
++ e1000_put_txbuf(adapter, buffer_info);
++ tx_desc->upper.data = 0;
+
-+ writel(0, adapter->hw.hw_addr + tx_ring->head);
-+ writel(0, adapter->hw.hw_addr + tx_ring->tail);
-+}
++ i++;
++ if (i == tx_ring->count)
++ i = 0;
++#ifdef CONFIG_E1000E_NAPI
++ if (total_tx_packets >= tx_ring->count) {
++ retval = 0;
++ goto done_cleaning;
++ }
++#endif
++ }
+
-+/**
-+ * e1000_free_tx_resources - Free Tx Resources per Queue
-+ * @adapter: board private structure
-+ *
-+ * Free all transmit software resources
-+ **/
-+void e1000_free_tx_resources(struct e1000_adapter *adapter)
-+{
-+ struct pci_dev *pdev = adapter->pdev;
-+ struct e1000_ring *tx_ring = adapter->tx_ring;
++ eop = tx_ring->buffer_info[i].next_to_watch;
++ eop_desc = E1000_TX_DESC(*tx_ring, eop);
++ }
+
-+ e1000_clean_tx_ring(adapter);
++#ifdef CONFIG_E1000E_NAPI
++done_cleaning:
++#endif
++ tx_ring->next_to_clean = i;
+
-+ vfree(tx_ring->buffer_info);
-+ tx_ring->buffer_info = NULL;
++#define TX_WAKE_THRESHOLD 32
++ if (cleaned && netif_carrier_ok(netdev) &&
++ e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
++ /* Make sure that anybody stopping the queue after this
++ * sees the new next_to_clean.
++ */
++ smp_mb();
+
-+ dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
-+ tx_ring->dma);
-+ tx_ring->desc = NULL;
++ if (netif_queue_stopped(netdev) &&
++ !(test_bit(__E1000_DOWN, &adapter->state))) {
++ netif_wake_queue(netdev);
++ ++adapter->restart_queue;
++ }
++ }
++
++ if (adapter->detect_tx_hung) {
++ /*
++ * Detect a transmit hang in hardware, this serializes the
++ * check with the clearing of time_stamp and movement of i
++ */
++ adapter->detect_tx_hung = 0;
++ if (tx_ring->buffer_info[eop].dma &&
++ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp
++ + (adapter->tx_timeout_factor * HZ))
++ && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
++ e1000_print_tx_hang(adapter);
++ netif_stop_queue(netdev);
++ }
++ }
++ adapter->total_tx_bytes += total_tx_bytes;
++ adapter->total_tx_packets += total_tx_packets;
++ adapter->net_stats.tx_bytes += total_tx_bytes;
++ adapter->net_stats.tx_packets += total_tx_packets;
++ return retval;
+}
+
+/**
+static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter)
+#endif
+{
++ struct e1000_hw *hw = &adapter->hw;
+ union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ buffer_info->dma = 0;
+
+ if (!(staterr & E1000_RXD_STAT_EOP)) {
-+ e_dbg("Packet Split buffers didn't pick up the full"
-+ " packet\n");
++ e_dbg("Packet Split buffers didn't pick up the full "
++ "packet\n");
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+ length = le16_to_cpu(rx_desc->wb.middle.length0);
+
+ if (!length) {
-+ e_dbg("Last part of the packet spanning multiple"
-+ " descriptors\n");
++ e_dbg("Last part of the packet spanning multiple "
++ "descriptors\n");
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+ pci_dma_sync_single_for_device(pdev, ps_page->dma,
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+
++ /* remove the CRC */
++ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
++ l1 -= 4;
++
+ skb_put(skb, l1);
+ goto copydone;
+ } /* if */
+ skb->truesize += length;
+ }
+
++ /* strip the ethernet crc, problem is we're using pages now so
++ * this whole operation can get a little cpu intensive */
++ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
++ pskb_trim(skb, skb->len - 4);
++
+#ifdef CONFIG_E1000E_NAPI
+copydone:
+#endif
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, cleaned_count);
+
-+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
++ adapter->total_rx_packets += total_rx_packets;
+ adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+#ifdef CONFIG_E1000E_NAPI
-+/* NOTE: these new jumbo frame routines rely on NAPI because of the
-+ * pskb_may_pull call, which eventually must call kmap_atomic which you cannot
-+ * call from hard irq context */
-+
+/**
+ * e1000_consume_page - helper function
+ **/
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
-+ bool cleaned = FALSE;
-+ unsigned int total_rx_bytes=0, total_rx_packets=0;
++ bool cleaned = false;
++ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
-+ cleaned = TRUE;
++ cleaned = true;
+ cleaned_count++;
+ pci_unmap_page(pdev, buffer_info->dma, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ goto next_desc;
+ }
+
-+#define rxtop rx_ring->rx_skb_top
++#define rxtop (rx_ring->rx_skb_top)
+ if (!(status & E1000_RXD_STAT_EOP)) {
+ /* this descriptor is only the beginning (or middle) */
+ if (!rxtop) {
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
-+ /* eth type trans needs skb->data to point to something */
-+ if (!pskb_may_pull(skb, ETH_HLEN)) {
-+ e_err("pskb_may_pull failed.\n");
-+ dev_kfree_skb(skb);
-+ goto next_desc;
-+ }
-+
-+ e1000_receive_skb(adapter, netdev, skb, status,
-+ rx_desc->special);
-+
-+next_desc:
-+ rx_desc->status = 0;
-+
-+ /* return some buffers to hardware, one at a time is too slow */
-+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
-+ adapter->alloc_rx_buf(adapter, cleaned_count);
-+ cleaned_count = 0;
-+ }
-+
-+ /* use prefetched values */
-+ rx_desc = next_rxd;
-+ buffer_info = next_buffer;
-+ }
-+ rx_ring->next_to_clean = i;
-+
-+ cleaned_count = e1000_desc_unused(rx_ring);
-+ if (cleaned_count)
-+ adapter->alloc_rx_buf(adapter, cleaned_count);
-+
-+ adapter->total_rx_packets += total_rx_packets;
-+ adapter->total_rx_bytes += total_rx_bytes;
-+ adapter->net_stats.rx_bytes += total_rx_bytes;
-+ adapter->net_stats.rx_packets += total_rx_packets;
-+ return cleaned;
-+}
-+#endif /* CONFIG_E1000E_NAPI */
-+
-+/**
-+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
-+ * @adapter: board private structure
-+ **/
-+static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
-+{
-+ struct e1000_ring *rx_ring = adapter->rx_ring;
-+ struct e1000_buffer *buffer_info;
-+ struct e1000_ps_page *ps_page;
-+ struct pci_dev *pdev = adapter->pdev;
-+ unsigned int i, j;
-+
-+ /* Free all the Rx ring sk_buffs */
-+ for (i = 0; i < rx_ring->count; i++) {
-+ buffer_info = &rx_ring->buffer_info[i];
-+ if (buffer_info->dma) {
-+ if (adapter->clean_rx == e1000_clean_rx_irq)
-+ pci_unmap_single(pdev, buffer_info->dma,
-+ adapter->rx_buffer_len,
-+ PCI_DMA_FROMDEVICE);
-+#ifdef CONFIG_E1000E_NAPI
-+ else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
-+ pci_unmap_page(pdev, buffer_info->dma,
-+ PAGE_SIZE,
-+ PCI_DMA_FROMDEVICE);
-+#endif
-+ else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
-+ pci_unmap_single(pdev, buffer_info->dma,
-+ adapter->rx_ps_bsize0,
-+ PCI_DMA_FROMDEVICE);
-+ buffer_info->dma = 0;
-+ }
-+
-+ if (buffer_info->page) {
-+ put_page(buffer_info->page);
-+ buffer_info->page = NULL;
-+ }
-+
-+ if (buffer_info->skb) {
-+ dev_kfree_skb(buffer_info->skb);
-+ buffer_info->skb = NULL;
-+ }
-+
-+ for (j = 0; j < PS_PAGE_BUFFERS; j++) {
-+ ps_page = &buffer_info->ps_pages[j];
-+ if (!ps_page->page)
-+ break;
-+ pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
-+ PCI_DMA_FROMDEVICE);
-+ ps_page->dma = 0;
-+ put_page(ps_page->page);
-+ ps_page->page = NULL;
-+ }
-+ }
-+
-+#ifdef CONFIG_E1000E_NAPI
-+ /* there also may be some cached data from a chained receive */
-+ if (rx_ring->rx_skb_top) {
-+ dev_kfree_skb(rx_ring->rx_skb_top);
-+ rx_ring->rx_skb_top = NULL;
-+ }
-+#endif
-+
-+ /* Zero out the descriptor ring */
-+ memset(rx_ring->desc, 0, rx_ring->size);
-+
-+ rx_ring->next_to_clean = 0;
-+ rx_ring->next_to_use = 0;
-+
-+ writel(0, adapter->hw.hw_addr + rx_ring->head);
-+ writel(0, adapter->hw.hw_addr + rx_ring->tail);
-+}
-+
-+/**
-+ * e1000_free_rx_resources - Free Rx Resources
-+ * @adapter: board private structure
-+ *
-+ * Free all receive software resources
-+ **/
-+
-+void e1000_free_rx_resources(struct e1000_adapter *adapter)
-+{
-+ struct pci_dev *pdev = adapter->pdev;
-+ struct e1000_ring *rx_ring = adapter->rx_ring;
-+ int i;
-+
-+ e1000_clean_rx_ring(adapter);
-+
-+ for (i = 0; i < rx_ring->count; i++) {
-+ kfree(rx_ring->buffer_info[i].ps_pages);
-+ }
-+
-+ vfree(rx_ring->buffer_info);
-+ rx_ring->buffer_info = NULL;
-+
-+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
-+ rx_ring->dma);
-+ rx_ring->desc = NULL;
-+}
-+
-+/**
-+ * e1000_update_itr - update the dynamic ITR value based on statistics
-+ * @adapter: pointer to adapter
-+ * @itr_setting: current adapter->itr
-+ * @packets: the number of packets during this measurement interval
-+ * @bytes: the number of bytes during this measurement interval
-+ *
-+ * Stores a new ITR value based on packets and byte
-+ * counts during the last interrupt. The advantage of per interrupt
-+ * computation is faster updates and more accurate ITR for the current
-+ * traffic pattern. Constants in this function were computed
-+ * based on theoretical maximum wire speed and thresholds were set based
-+ * on testing data as well as attempting to minimize response time
-+ * while increasing bulk throughput. This functionality is controlled
-+ * by the InterruptThrottleRate module parameter.
-+ **/
-+static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
-+ u16 itr_setting, int packets,
-+ int bytes)
-+{
-+ unsigned int retval = itr_setting;
-+
-+ if (packets == 0)
-+ goto update_itr_done;
-+
-+ switch (itr_setting) {
-+ case lowest_latency:
-+ /* handle TSO and jumbo frames */
-+ if (bytes/packets > 8000)
-+ retval = bulk_latency;
-+ else if ((packets < 5) && (bytes > 512)) {
-+ retval = low_latency;
-+ }
-+ break;
-+ case low_latency: /* 50 usec aka 20000 ints/s */
-+ if (bytes > 10000) {
-+ /* this if handles the TSO accounting */
-+ if (bytes/packets > 8000) {
-+ retval = bulk_latency;
-+ } else if ((packets < 10) || ((bytes/packets) > 1200)) {
-+ retval = bulk_latency;
-+ } else if ((packets > 35)) {
-+ retval = lowest_latency;
-+ }
-+ } else if (bytes/packets > 2000) {
-+ retval = bulk_latency;
-+ } else if (packets <= 2 && bytes < 512) {
-+ retval = lowest_latency;
-+ }
-+ break;
-+ case bulk_latency: /* 250 usec aka 4000 ints/s */
-+ if (bytes > 25000) {
-+ if (packets > 35) {
-+ retval = low_latency;
-+ }
-+ } else if (bytes < 6000) {
-+ retval = low_latency;
-+ }
-+ break;
-+ }
-+
-+update_itr_done:
-+ return retval;
-+}
-+
-+static void e1000_set_itr(struct e1000_adapter *adapter)
-+{
-+ struct e1000_hw *hw = &adapter->hw;
-+ u16 current_itr;
-+ u32 new_itr = adapter->itr;
-+
-+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
-+ if (adapter->link_speed != SPEED_1000) {
-+ current_itr = 0;
-+ new_itr = 4000;
-+ goto set_itr_now;
-+ }
++ /* eth type trans needs skb->data to point to something */
++ if (!pskb_may_pull(skb, ETH_HLEN)) {
++ e_err("pskb_may_pull failed.\n");
++ dev_kfree_skb(skb);
++ goto next_desc;
++ }
+
-+ adapter->tx_itr = e1000_update_itr(adapter,
-+ adapter->tx_itr,
-+ adapter->total_tx_packets,
-+ adapter->total_tx_bytes);
-+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
-+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
-+ adapter->tx_itr = low_latency;
++ e1000_receive_skb(adapter, netdev, skb, status,
++ rx_desc->special);
+
-+ adapter->rx_itr = e1000_update_itr(adapter,
-+ adapter->rx_itr,
-+ adapter->total_rx_packets,
-+ adapter->total_rx_bytes);
-+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
-+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
-+ adapter->rx_itr = low_latency;
++next_desc:
++ rx_desc->status = 0;
+
-+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
++ /* return some buffers to hardware, one at a time is too slow */
++ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
++ adapter->alloc_rx_buf(adapter, cleaned_count);
++ cleaned_count = 0;
++ }
+
-+ switch (current_itr) {
-+ /* counts and packets in update_itr are dependent on these numbers */
-+ case lowest_latency:
-+ new_itr = 70000;
-+ break;
-+ case low_latency:
-+ new_itr = 20000; /* aka hwitr = ~200 */
-+ break;
-+ case bulk_latency:
-+ new_itr = 4000;
-+ break;
-+ default:
-+ break;
++ /* use prefetched values */
++ rx_desc = next_rxd;
++ buffer_info = next_buffer;
+ }
++ rx_ring->next_to_clean = i;
+
-+set_itr_now:
-+ if (new_itr != adapter->itr) {
-+ /*
-+ * this attempts to bias the interrupt rate towards Bulk
-+ * by adding intermediate steps when interrupt rate is
-+ * increasing
-+ */
-+ new_itr = new_itr > adapter->itr ?
-+ min(adapter->itr + (new_itr >> 2), new_itr) :
-+ new_itr;
-+ adapter->itr = new_itr;
-+#ifdef CONFIG_E1000E_MSIX
-+ adapter->rx_ring->itr_val = new_itr;
-+ if (adapter->msix_entries)
-+ adapter->rx_ring->set_itr = 1;
-+ else
-+#endif
-+ ew32(ITR, 1000000000 / (new_itr * 256));
-+ }
++ cleaned_count = e1000_desc_unused(rx_ring);
++ if (cleaned_count)
++ adapter->alloc_rx_buf(adapter, cleaned_count);
++
++ adapter->total_rx_bytes += total_rx_bytes;
++ adapter->total_rx_packets += total_rx_packets;
++ adapter->net_stats.rx_bytes += total_rx_bytes;
++ adapter->net_stats.rx_packets += total_rx_packets;
++ return cleaned;
+}
+
++#endif /* CONFIG_E1000E_NAPI */
+/**
-+ * e1000_clean_tx_irq - Reclaim resources after transmit completes
++ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
-+ *
-+ * the return value indicates if there is more work to do (later)
+ **/
-+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
++static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
+{
-+ struct net_device *netdev = adapter->netdev;
-+ struct e1000_hw *hw = &adapter->hw;
-+ struct e1000_ring *tx_ring = adapter->tx_ring;
-+ struct e1000_tx_desc *tx_desc, *eop_desc;
++ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_buffer *buffer_info;
-+ unsigned int i, eop;
-+ bool cleaned = 0, retval = 1;
-+ unsigned int total_tx_bytes = 0, total_tx_packets = 0;
-+
-+ i = tx_ring->next_to_clean;
-+ eop = tx_ring->buffer_info[i].next_to_watch;
-+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
-+
-+ while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
-+ for (cleaned = 0; !cleaned; ) {
-+ tx_desc = E1000_TX_DESC(*tx_ring, i);
-+ buffer_info = &tx_ring->buffer_info[i];
-+ cleaned = (i == eop);
++ struct e1000_ps_page *ps_page;
++ struct pci_dev *pdev = adapter->pdev;
++ unsigned int i, j;
+
-+ if (cleaned) {
-+ struct sk_buff *skb = buffer_info->skb;
-+#ifdef NETIF_F_TSO
-+ unsigned int segs, bytecount;
-+ segs = skb_shinfo(skb)->gso_segs ?: 1;
-+ /* multiply data chunks by size of headers */
-+ bytecount = ((segs - 1) * skb_headlen(skb)) +
-+ skb->len;
-+ total_tx_packets += segs;
-+ total_tx_bytes += bytecount;
-+#else
-+ total_tx_packets++;
-+ total_tx_bytes += skb->len;
++ /* Free all the Rx ring sk_buffs */
++ for (i = 0; i < rx_ring->count; i++) {
++ buffer_info = &rx_ring->buffer_info[i];
++ if (buffer_info->dma) {
++ if (adapter->clean_rx == e1000_clean_rx_irq)
++ pci_unmap_single(pdev, buffer_info->dma,
++ adapter->rx_buffer_len,
++ PCI_DMA_FROMDEVICE);
++#ifdef CONFIG_E1000E_NAPI
++ else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
++ pci_unmap_page(pdev, buffer_info->dma,
++ PAGE_SIZE,
++ PCI_DMA_FROMDEVICE);
+#endif
-+ }
++ else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
++ pci_unmap_single(pdev, buffer_info->dma,
++ adapter->rx_ps_bsize0,
++ PCI_DMA_FROMDEVICE);
++ buffer_info->dma = 0;
++ }
+
-+ e1000_put_txbuf(adapter, buffer_info);
-+ tx_desc->upper.data = 0;
++ if (buffer_info->page) {
++ put_page(buffer_info->page);
++ buffer_info->page = NULL;
++ }
+
-+ i++;
-+ if (i == tx_ring->count)
-+ i = 0;
-+#ifdef CONFIG_E1000E_NAPI
-+ if (total_tx_packets >= tx_ring->count) {
-+ retval = 0;
-+ goto done_cleaning;
-+ }
-+#endif
++ if (buffer_info->skb) {
++ dev_kfree_skb(buffer_info->skb);
++ buffer_info->skb = NULL;
+ }
+
-+ eop = tx_ring->buffer_info[i].next_to_watch;
-+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
++ for (j = 0; j < PS_PAGE_BUFFERS; j++) {
++ ps_page = &buffer_info->ps_pages[j];
++ if (!ps_page->page)
++ break;
++ pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
++ PCI_DMA_FROMDEVICE);
++ ps_page->dma = 0;
++ put_page(ps_page->page);
++ ps_page->page = NULL;
++ }
+ }
+
+#ifdef CONFIG_E1000E_NAPI
-+done_cleaning:
++ /* there also may be some cached data from a chained receive */
++ if (rx_ring->rx_skb_top) {
++ dev_kfree_skb(rx_ring->rx_skb_top);
++ rx_ring->rx_skb_top = NULL;
++ }
+#endif
-+ tx_ring->next_to_clean = i;
+
-+#define TX_WAKE_THRESHOLD 32
-+ if (cleaned && netif_carrier_ok(netdev) &&
-+ e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
-+ /*
-+ * Make sure that anybody stopping the queue after this
-+ * sees the new next_to_clean.
-+ */
-+ smp_mb();
++ /* Zero out the descriptor ring */
++ memset(rx_ring->desc, 0, rx_ring->size);
+
-+ if (netif_queue_stopped(netdev) &&
-+ !(test_bit(__E1000_DOWN, &adapter->state))) {
-+ netif_wake_queue(netdev);
-+ ++adapter->restart_queue;
-+ }
-+ }
++ rx_ring->next_to_clean = 0;
++ rx_ring->next_to_use = 0;
+
-+ if (adapter->detect_tx_hung) {
-+ /*
-+ * Detect a transmit hang in hardware, this serializes the
-+ * check with the clearing of time_stamp and movement of i
-+ */
-+ adapter->detect_tx_hung = 0;
-+ if (tx_ring->buffer_info[eop].dma &&
-+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp
-+ + (adapter->tx_timeout_factor * HZ))
-+ && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
-+ e1000_print_tx_hang(adapter);
-+ netif_stop_queue(netdev);
-+ }
-+ }
-+ adapter->total_tx_bytes += total_tx_bytes;
-+ adapter->total_tx_packets += total_tx_packets;
-+ adapter->net_stats.tx_bytes += total_tx_bytes;
-+ adapter->net_stats.tx_packets += total_tx_packets;
-+ return retval;
++ writel(0, adapter->hw.hw_addr + rx_ring->head);
++ writel(0, adapter->hw.hw_addr + rx_ring->tail);
+}
+
++static void e1000e_downshift_workaround(struct work_struct *work)
++{
++ struct e1000_adapter *adapter = container_of(work,
++ struct e1000_adapter, downshift_task);
++
++ e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
++}
++
++#ifndef CONFIG_E1000E_NAPI
++static void e1000_set_itr(struct e1000_adapter *adapter);
++#endif
+/**
+ * e1000_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+#ifndef CONFIG_E1000E_NAPI
+ int i;
+#endif
-+ /* read ICR disables interrupts using IAM */
+ u32 icr = er32(ICR);
+
-+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
++ /*
++ * read ICR disables interrupts using IAM
++ */
++
++ if (icr & E1000_ICR_LSC) {
+ hw->mac.get_link_status = 1;
+ /*
+ * ICH8 workaround-- Call gig speed drop workaround on cable
+ */
+ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
+ (!(er32(STATUS) & E1000_STATUS_LU)))
-+ e1000_gig_downshift_workaround_ich8lan(hw);
++ schedule_work(&adapter->downshift_task);
+
+ /*
+ * 80003ES2LAN workaround-- For packet buffer work-around on
+ }
+
+#ifdef CONFIG_E1000E_NAPI
-+ if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
++ if (napi_schedule_prep(&adapter->napi)) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
-+ __netif_rx_schedule(netdev, &adapter->napi);
++ __napi_schedule(&adapter->napi);
+ }
+#else
+ adapter->total_tx_bytes = 0;
+#endif
+ u32 rctl, icr = er32(ICR);
+
-+ if (!icr)
++ if (!icr || test_bit(__E1000_DOWN, &adapter->state))
+ return IRQ_NONE; /* Not our interrupt */
+
+#ifdef CONFIG_E1000E_NAPI
+ return IRQ_NONE;
+
+#endif /* CONFIG_E1000E_NAPI */
-+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
++ /*
++ * Interrupt Auto-Mask...upon reading ICR,
++ * interrupts are masked. No need for the
++ * IMC write
++ */
++
++ if (icr & E1000_ICR_LSC) {
+ hw->mac.get_link_status = 1;
+ /*
+ * ICH8 workaround-- Call gig speed drop workaround on cable
+ */
+ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
+ (!(er32(STATUS) & E1000_STATUS_LU)))
-+ e1000_gig_downshift_workaround_ich8lan(hw);
++ schedule_work(&adapter->downshift_task);
+
+ /*
+ * 80003ES2LAN workaround--
+ }
+
+#ifdef CONFIG_E1000E_NAPI
-+ if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
++ if (napi_schedule_prep(&adapter->napi)) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
-+ __netif_rx_schedule(netdev, &adapter->napi);
++ __napi_schedule(&adapter->napi);
+ }
+#else
+ adapter->total_tx_bytes = 0;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
-+ if (!(icr & E1000_ICR_INT_ASSERTED))
-+ {
++ if (!(icr & E1000_ICR_INT_ASSERTED)) {
+ ew32(IMS, E1000_IMS_OTHER);
+ return IRQ_NONE;
+ }
+ adapter->hw.hw_addr + adapter->rx_ring->itr_register);
+ adapter->rx_ring->set_itr = 0;
+ }
-+
++
+#ifdef CONFIG_E1000E_NAPI
-+ if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
++ if (napi_schedule_prep(&adapter->napi)) {
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+#ifndef CONFIG_E1000E_SEPARATE_TX_HANDLER
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+#endif /* CONFIG_E1000E_SEPARATE_TX_HANDLER */
-+ __netif_rx_schedule(netdev, &adapter->napi);
++ __napi_schedule(&adapter->napi);
+ }
+#else
+ adapter->total_rx_bytes = 0;
+ e1e_flush();
+}
+
-+void e1000_reset_interrupt_capability(struct e1000_adapter *adapter)
++void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
+{
+ if (adapter->msix_entries) {
+ pci_disable_msix(adapter->pdev);
+}
+
+/**
-+ * e1000_set_interrupt_capability - set MSI or MSI-X if supported
++ * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
-+void e1000_set_interrupt_capability(struct e1000_adapter *adapter)
++void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
+{
+ int err;
+ int numvecs, i;
+ sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (adapter->msix_entries) {
-+ for (i=0; i < numvecs; i++)
++ for (i = 0; i < numvecs; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(adapter->pdev,
+ adapter->msix_entries,
-+ numvecs);
++ numvecs);
+ if (err == 0)
+ return;
+ }
+ /* MSI-X failed, so fall through and try MSI */
+ e_err("Failed to initialize MSI-X interrupts. "
+ "Falling back to MSI interrupts.\n");
-+ e1000_reset_interrupt_capability(adapter);
++ e1000e_reset_interrupt_capability(adapter);
+ }
+ adapter->int_mode = E1000E_INT_MODE_MSI;
+ /* Fall through */
+
+ if (strlen(netdev->name) < (IFNAMSIZ - 5))
+#ifdef CONFIG_E1000E_SEPARATE_TX_HANDLER
-+ sprintf(adapter->rx_ring->name, "%s-rx0", netdev->name);
++ sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name);
+#else
+ sprintf(adapter->rx_ring->name, "%s-Q0", netdev->name);
+#endif
+ memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &e1000_intr_msix_rx, 0, adapter->rx_ring->name,
-+ netdev);
++ netdev);
+ if (err)
+ goto out;
+ adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
+
+#ifdef CONFIG_E1000E_SEPARATE_TX_HANDLER
+ if (strlen(netdev->name) < (IFNAMSIZ - 5))
-+ sprintf(adapter->tx_ring->name, "%s-tx0", netdev->name);
++ sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
+ else
+ memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &e1000_intr_msix_tx, 0, adapter->tx_ring->name,
-+ netdev);
++ netdev);
+ if (err)
+ goto out;
+ adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
-+ adapter->tx_ring->itr_val = adapter->itr;
-+ vector++;
-+
-+#endif /* CONFIG_E1000E_SEPARATE_TX_HANDLER */
-+ err = request_irq(adapter->msix_entries[vector].vector,
-+ &e1000_msix_other, 0, netdev->name, netdev);
-+ if (err)
-+ goto out;
-+
-+ e1000_configure_msix(adapter);
-+ return 0;
-+out:
-+ return err;
-+}
-+
-+#endif /* CONFIG_E1000E_MSIX */
-+/**
-+ * e1000_alloc_queues - Allocate memory for all rings
-+ * @adapter: board private structure to initialize
-+ **/
-+static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
-+{
-+ adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
-+ if (!adapter->tx_ring)
-+ goto err;
++ adapter->tx_ring->itr_val = adapter->itr;
++ vector++;
+
-+ adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
-+ if (!adapter->rx_ring)
-+ goto err;
++#endif /* CONFIG_E1000E_SEPARATE_TX_HANDLER */
++ err = request_irq(adapter->msix_entries[vector].vector,
++ &e1000_msix_other, 0, netdev->name, netdev);
++ if (err)
++ goto out;
+
++ e1000_configure_msix(adapter);
+ return 0;
-+err:
-+ e_err("Unable to allocate memory for queues\n");
-+ kfree(adapter->rx_ring);
-+ kfree(adapter->tx_ring);
-+ return -ENOMEM;
++out:
++ return err;
+}
+
++#endif /* CONFIG_E1000E_MSIX */
+/**
+ * e1000_request_irq - initialize interrupts
+ *
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
++#ifndef CONFIG_E1000E_MSIX
++ int irq_flags = IRQF_SHARED;
++#endif
+ int err;
-+#ifdef CONFIG_E1000E_MSIX
+
++#ifdef CONFIG_E1000E_MSIX
+ if (adapter->msix_entries) {
+ err = e1000_request_msix(adapter);
+ if (!err)
+ return err;
+ /* fall back to MSI */
-+ e1000_reset_interrupt_capability(adapter);
++ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = E1000E_INT_MODE_MSI;
-+ e1000_set_interrupt_capability(adapter);
++ e1000e_set_interrupt_capability(adapter);
+ }
+ if (adapter->flags & FLAG_MSI_ENABLED) {
+ err = request_irq(adapter->pdev->irq, &e1000_intr_msi, 0,
-+ netdev->name, netdev);
++ netdev->name, netdev);
+ if (!err)
+ return err;
+
+ /* fall back to legacy interrupt */
-+ e1000_reset_interrupt_capability(adapter);
++ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
+ }
+
+ err = request_irq(adapter->pdev->irq, &e1000_intr, IRQF_SHARED,
-+ netdev->name, netdev);
++ netdev->name, netdev);
+ if (err)
+ e_err("Unable to allocate interrupt, Error: %d\n", err);
+#else
-+ int irq_flags = IRQF_SHARED;
-+
+ if (!(adapter->flags & FLAG_MSI_TEST_FAILED)) {
+ err = pci_enable_msi(adapter->pdev);
+ if (!err) {
+}
+
+/**
-+ * e1000_irq_disable - Mask off interrupt generation on the NIC
++ * e1000_irq_disable - Mask off interrupt generation on the NIC
++ **/
++static void e1000_irq_disable(struct e1000_adapter *adapter)
++{
++ struct e1000_hw *hw = &adapter->hw;
++
++ ew32(IMC, ~0);
++#ifdef CONFIG_E1000E_MSIX
++ if (adapter->msix_entries)
++ ew32(EIAC_82574, 0);
++#endif /* CONFIG_E1000E_MSIX */
++ e1e_flush();
++ synchronize_irq(adapter->pdev->irq);
++}
++
++/**
++ * e1000_irq_enable - Enable default interrupt generation settings
++ **/
++static void e1000_irq_enable(struct e1000_adapter *adapter)
++{
++ struct e1000_hw *hw = &adapter->hw;
++
++#ifdef CONFIG_E1000E_MSIX
++ if (adapter->msix_entries) {
++ ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
++ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
++ } else {
++ ew32(IMS, IMS_ENABLE_MASK);
++ }
++#else
++ ew32(IMS, IMS_ENABLE_MASK);
++#endif /* CONFIG_E1000E_MSIX */
++ e1e_flush();
++}
++
++/**
++ * e1000_get_hw_control - get control of the h/w from f/w
++ * @adapter: address of board private structure
++ *
++ * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
++ * For ASF and Pass Through versions of f/w this means that
++ * the driver is loaded. For AMT version (only with 82573)
++ * of the f/w this means that the network i/f is open.
++ **/
++static void e1000_get_hw_control(struct e1000_adapter *adapter)
++{
++ struct e1000_hw *hw = &adapter->hw;
++ u32 ctrl_ext;
++ u32 swsm;
++
++ /* Let firmware know the driver has taken over */
++ if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
++ swsm = er32(SWSM);
++ ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
++ } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
++ ctrl_ext = er32(CTRL_EXT);
++ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
++ }
++}
++
++/**
++ * e1000_release_hw_control - release control of the h/w to f/w
++ * @adapter: address of board private structure
++ *
++ * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
++ * For ASF and Pass Through versions of f/w this means that the
++ * driver is no longer loaded. For AMT version (only with 82573) i
++ * of the f/w this means that the network i/f is closed.
++ *
++ **/
++static void e1000_release_hw_control(struct e1000_adapter *adapter)
++{
++ struct e1000_hw *hw = &adapter->hw;
++ u32 ctrl_ext;
++ u32 swsm;
++
++ /* Let firmware taken over control of h/w */
++ if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
++ swsm = er32(SWSM);
++ ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
++ } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
++ ctrl_ext = er32(CTRL_EXT);
++ ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
++ }
++}
++
++/**
++ * @e1000_alloc_ring - allocate memory for a ring structure
++ **/
++static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
++ struct e1000_ring *ring)
++{
++ struct pci_dev *pdev = adapter->pdev;
++
++ ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
++ GFP_KERNEL);
++ if (!ring->desc)
++ return -ENOMEM;
++
++ return 0;
++}
++
++/**
++ * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
++ * @adapter: board private structure
++ *
++ * Return 0 on success, negative on failure
++ **/
++int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
++{
++ struct e1000_ring *tx_ring = adapter->tx_ring;
++ int err = -ENOMEM, size;
++
++ size = sizeof(struct e1000_buffer) * tx_ring->count;
++ tx_ring->buffer_info = vmalloc(size);
++ if (!tx_ring->buffer_info)
++ goto err;
++ memset(tx_ring->buffer_info, 0, size);
++
++ /* round up to nearest 4K */
++ tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
++ tx_ring->size = ALIGN(tx_ring->size, 4096);
++
++ err = e1000_alloc_ring_dma(adapter, tx_ring);
++ if (err)
++ goto err;
++
++ tx_ring->next_to_use = 0;
++ tx_ring->next_to_clean = 0;
++
++ return 0;
++err:
++ vfree(tx_ring->buffer_info);
++ e_err("Unable to allocate memory for the transmit descriptor ring\n");
++ return err;
++}
++
++/**
++ * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
++ * @adapter: board private structure
++ *
++ * Returns 0 on success, negative on failure
++ **/
++int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
++{
++ struct e1000_ring *rx_ring = adapter->rx_ring;
++ struct e1000_buffer *buffer_info;
++ int i, size, desc_len, err = -ENOMEM;
++
++ size = sizeof(struct e1000_buffer) * rx_ring->count;
++ rx_ring->buffer_info = vmalloc(size);
++ if (!rx_ring->buffer_info)
++ goto err;
++ memset(rx_ring->buffer_info, 0, size);
++
++ for (i = 0; i < rx_ring->count; i++) {
++ buffer_info = &rx_ring->buffer_info[i];
++ buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
++ sizeof(struct e1000_ps_page),
++ GFP_KERNEL);
++ if (!buffer_info->ps_pages)
++ goto err_pages;
++ }
++
++ desc_len = sizeof(union e1000_rx_desc_packet_split);
++
++ /* Round up to nearest 4K */
++ rx_ring->size = rx_ring->count * desc_len;
++ rx_ring->size = ALIGN(rx_ring->size, 4096);
++
++ err = e1000_alloc_ring_dma(adapter, rx_ring);
++ if (err)
++ goto err_pages;
++
++ rx_ring->next_to_clean = 0;
++ rx_ring->next_to_use = 0;
++ rx_ring->rx_skb_top = NULL;
++
++ return 0;
++
++err_pages:
++ for (i = 0; i < rx_ring->count; i++) {
++ buffer_info = &rx_ring->buffer_info[i];
++ kfree(buffer_info->ps_pages);
++ }
++err:
++ vfree(rx_ring->buffer_info);
++ e_err("Unable to allocate memory for the receive descriptor ring\n");
++ return err;
++}
++
++/**
++ * e1000_clean_tx_ring - Free Tx Buffers
++ * @adapter: board private structure
++ **/
++static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
++{
++ struct e1000_ring *tx_ring = adapter->tx_ring;
++ struct e1000_buffer *buffer_info;
++ unsigned long size;
++ unsigned int i;
++
++ for (i = 0; i < tx_ring->count; i++) {
++ buffer_info = &tx_ring->buffer_info[i];
++ e1000_put_txbuf(adapter, buffer_info);
++ }
++
++ size = sizeof(struct e1000_buffer) * tx_ring->count;
++ memset(tx_ring->buffer_info, 0, size);
++
++ memset(tx_ring->desc, 0, tx_ring->size);
++
++ tx_ring->next_to_use = 0;
++ tx_ring->next_to_clean = 0;
++
++ writel(0, adapter->hw.hw_addr + tx_ring->head);
++ writel(0, adapter->hw.hw_addr + tx_ring->tail);
++}
++
++/**
++ * e1000e_free_tx_resources - Free Tx Resources per Queue
++ * @adapter: board private structure
++ *
++ * Free all transmit software resources
++ **/
++void e1000e_free_tx_resources(struct e1000_adapter *adapter)
++{
++ struct pci_dev *pdev = adapter->pdev;
++ struct e1000_ring *tx_ring = adapter->tx_ring;
++
++ e1000_clean_tx_ring(adapter);
++
++ vfree(tx_ring->buffer_info);
++ tx_ring->buffer_info = NULL;
++
++ dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
++ tx_ring->dma);
++ tx_ring->desc = NULL;
++}
++
++/**
++ * e1000e_free_rx_resources - Free Rx Resources
++ * @adapter: board private structure
++ *
++ * Free all receive software resources
+ **/
-+static void e1000_irq_disable(struct e1000_adapter *adapter)
++
++void e1000e_free_rx_resources(struct e1000_adapter *adapter)
+{
-+ struct e1000_hw *hw = &adapter->hw;
++ struct pci_dev *pdev = adapter->pdev;
++ struct e1000_ring *rx_ring = adapter->rx_ring;
++ int i;
+
-+ ew32(IMC, ~0);
-+#ifdef CONFIG_E1000E_MSIX
-+ if (adapter->msix_entries) {
-+ ew32(EIAC_82574, 0);
++ e1000_clean_rx_ring(adapter);
++
++ for (i = 0; i < rx_ring->count; i++) {
++ kfree(rx_ring->buffer_info[i].ps_pages);
+ }
-+#endif /* CONFIG_E1000E_MSIX */
-+ e1e_flush();
-+ synchronize_irq(adapter->pdev->irq);
++
++ vfree(rx_ring->buffer_info);
++ rx_ring->buffer_info = NULL;
++
++ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
++ rx_ring->dma);
++ rx_ring->desc = NULL;
+}
+
+/**
-+ * e1000_irq_enable - Enable default interrupt generation settings
++ * e1000_update_itr - update the dynamic ITR value based on statistics
++ * @adapter: pointer to adapter
++ * @itr_setting: current adapter->itr
++ * @packets: the number of packets during this measurement interval
++ * @bytes: the number of bytes during this measurement interval
++ *
++ * Stores a new ITR value based on packets and byte
++ * counts during the last interrupt. The advantage of per interrupt
++ * computation is faster updates and more accurate ITR for the current
++ * traffic pattern. Constants in this function were computed
++ * based on theoretical maximum wire speed and thresholds were set based
++ * on testing data as well as attempting to minimize response time
++ * while increasing bulk throughput. This functionality is controlled
++ * by the InterruptThrottleRate module parameter.
+ **/
-+static void e1000_irq_enable(struct e1000_adapter *adapter)
++static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
++ u16 itr_setting, int packets,
++ int bytes)
+{
-+ struct e1000_hw *hw = &adapter->hw;
-+#ifdef CONFIG_E1000E_MSIX
++ unsigned int retval = itr_setting;
+
-+ if (adapter->msix_entries) {
-+ ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
-+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
-+ } else {
-+ ew32(IMS, IMS_ENABLE_MASK);
++ if (packets == 0)
++ goto update_itr_done;
++
++ switch (itr_setting) {
++ case lowest_latency:
++ /* handle TSO and jumbo frames */
++ if (bytes/packets > 8000)
++ retval = bulk_latency;
++ else if ((packets < 5) && (bytes > 512)) {
++ retval = low_latency;
++ }
++ break;
++ case low_latency: /* 50 usec aka 20000 ints/s */
++ if (bytes > 10000) {
++ /* this if handles the TSO accounting */
++ if (bytes/packets > 8000) {
++ retval = bulk_latency;
++ } else if ((packets < 10) || ((bytes/packets) > 1200)) {
++ retval = bulk_latency;
++ } else if ((packets > 35)) {
++ retval = lowest_latency;
++ }
++ } else if (bytes/packets > 2000) {
++ retval = bulk_latency;
++ } else if (packets <= 2 && bytes < 512) {
++ retval = lowest_latency;
++ }
++ break;
++ case bulk_latency: /* 250 usec aka 4000 ints/s */
++ if (bytes > 25000) {
++ if (packets > 35) {
++ retval = low_latency;
++ }
++ } else if (bytes < 6000) {
++ retval = low_latency;
++ }
++ break;
+ }
-+#else
-+ ew32(IMS, IMS_ENABLE_MASK);
-+#endif /* CONFIG_E1000E_MSIX */
++
++update_itr_done:
++ return retval;
+}
+
-+/**
-+ * e1000_get_hw_control - get control of the h/w from f/w
-+ * @adapter: address of board private structure
-+ *
-+ * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
-+ * For ASF and Pass Through versions of f/w this means that
-+ * the driver is loaded. For AMT version (only with 82573)
-+ * of the f/w this means that the network i/f is open.
-+ **/
-+static void e1000_get_hw_control(struct e1000_adapter *adapter)
++static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
-+ u32 ctrl_ext;
-+ u32 swsm;
++ u16 current_itr;
++ u32 new_itr = adapter->itr;
+
-+ /* Let firmware know the driver has taken over */
-+ if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
-+ swsm = er32(SWSM);
-+ ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
-+ } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
-+ ctrl_ext = er32(CTRL_EXT);
-+ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
++ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
++ if (adapter->link_speed != SPEED_1000) {
++ current_itr = 0;
++ new_itr = 4000;
++ goto set_itr_now;
++ }
++
++ adapter->tx_itr = e1000_update_itr(adapter,
++ adapter->tx_itr,
++ adapter->total_tx_packets,
++ adapter->total_tx_bytes);
++ /* conservative mode (itr 3) eliminates the lowest_latency setting */
++ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
++ adapter->tx_itr = low_latency;
++
++ adapter->rx_itr = e1000_update_itr(adapter,
++ adapter->rx_itr,
++ adapter->total_rx_packets,
++ adapter->total_rx_bytes);
++ /* conservative mode (itr 3) eliminates the lowest_latency setting */
++ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
++ adapter->rx_itr = low_latency;
++
++ current_itr = max(adapter->rx_itr, adapter->tx_itr);
++
++ switch (current_itr) {
++ /* counts and packets in update_itr are dependent on these numbers */
++ case lowest_latency:
++ new_itr = 70000;
++ break;
++ case low_latency:
++ new_itr = 20000; /* aka hwitr = ~200 */
++ break;
++ case bulk_latency:
++ new_itr = 4000;
++ break;
++ default:
++ break;
++ }
++
++set_itr_now:
++ if (new_itr != adapter->itr) {
++ /*
++ * this attempts to bias the interrupt rate towards Bulk
++ * by adding intermediate steps when interrupt rate is
++ * increasing
++ */
++ new_itr = new_itr > adapter->itr ?
++ min(adapter->itr + (new_itr >> 2), new_itr) :
++ new_itr;
++ adapter->itr = new_itr;
++#ifdef CONFIG_E1000E_MSIX
++ adapter->rx_ring->itr_val = new_itr;
++ if (adapter->msix_entries)
++ adapter->rx_ring->set_itr = 1;
++ else
++ ew32(ITR, 1000000000 / (new_itr * 256));
++#else
++ ew32(ITR, 1000000000 / (new_itr * 256));
++#endif
+ }
+}
+
+/**
-+ * e1000_release_hw_control - release control of the h/w to f/w
-+ * @adapter: address of board private structure
-+ *
-+ * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
-+ * For ASF and Pass Through versions of f/w this means that the
-+ * driver is no longer loaded. For AMT version (only with 82573) i
-+ * of the f/w this means that the network i/f is closed.
-+ *
++ * e1000_alloc_queues - Allocate memory for all rings
++ * @adapter: board private structure to initialize
+ **/
-+static void e1000_release_hw_control(struct e1000_adapter *adapter)
++static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
+{
-+ struct e1000_hw *hw = &adapter->hw;
-+ u32 ctrl_ext;
-+ u32 swsm;
++ adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
++ if (!adapter->tx_ring)
++ goto err;
+
-+ /* Let firmware taken over control of h/w */
-+ if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
-+ swsm = er32(SWSM);
-+ ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
-+ } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
-+ ctrl_ext = er32(CTRL_EXT);
-+ ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
-+ }
++ adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
++ if (!adapter->rx_ring)
++ goto err;
++
++ return 0;
++err:
++ e_err("Unable to allocate memory for queues\n");
++ kfree(adapter->rx_ring);
++ kfree(adapter->tx_ring);
++ return -ENOMEM;
+}
+
+#ifdef CONFIG_E1000E_NAPI
+{
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
+ napi);
-+ struct net_device *netdev = adapter->netdev;
+ int tx_clean_complete = 1, work_done = 0;
+#ifdef CONFIG_E1000E_MSIX
+ struct e1000_hw *hw = &adapter->hw;
-+
-+ if (adapter->msix_entries &&
-+ !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
-+ goto clean_rx;
-+
+#endif
-+ /*
-+ * e1000_poll is called per-cpu. This lock protects
-+ * tx_ring from being cleaned by multiple cpus
-+ * simultaneously. A failure obtaining the lock means
-+ * tx_ring is currently being cleaned anyway.
-+ */
-+ if (spin_trylock(&adapter->tx_queue_lock)) {
-+ tx_clean_complete &= e1000_clean_tx_irq(adapter);
-+ spin_unlock(&adapter->tx_queue_lock);
-+ }
+
+#ifdef CONFIG_E1000E_MSIX
-+clean_rx:
++ if (!adapter->msix_entries ||
++ (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
+#endif
++ tx_clean_complete = e1000_clean_tx_irq(adapter);
++
+ adapter->clean_rx(adapter, &work_done, budget);
+
++ if (!tx_clean_complete)
++ work_done = budget;
++
++#ifndef HAVE_NETDEV_NAPI_LIST
++ if (!netif_running(adapter->netdev))
++ work_done = 0;
++
++#endif
+ /* If Tx completed and all Rx work done, exit the polling mode */
-+ if ((tx_clean_complete && (work_done == 0)) || !netif_running(netdev)) {
-+ netif_rx_complete(netdev, napi);
++ if (work_done < budget) {
++ napi_complete(napi);
+ if (adapter->itr_setting & 3)
+ e1000_set_itr(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->state)) {
+#endif
+ e1000_irq_enable(adapter);
+ }
-+ return 0;
+ }
+
-+ if (!tx_clean_complete)
-+ work_done = budget;
-+
+ return work_done;
+}
+
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
-+ if (hw->mac.ops.write_vfta)
-+ hw->mac.ops.write_vfta(hw, index, vfta);
++ e1000e_write_vfta(hw, index, vfta);
+ /*
+ * Copy feature flags from netdev to the vlan netdev for this vid.
+ * This allows things like TSO to bubble down to our vlan device.
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_disable(adapter);
+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
++
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_enable(adapter);
+
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
-+ if (hw->mac.ops.write_vfta)
-+ hw->mac.ops.write_vfta(hw, index, vfta);
++ e1000e_write_vfta(hw, index, vfta);
+}
+
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
-+ rctl |= E1000_RCTL_VFE;
+ rctl &= ~E1000_RCTL_CFIEN;
+ ew32(RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
+ ew32(CTRL, ctrl);
+
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
-+ /* disable VLAN filtering */
-+ rctl = er32(RCTL);
-+ rctl &= ~E1000_RCTL_VFE;
-+ ew32(RCTL, rctl);
+ if (adapter->mng_vlan_id !=
+ (u16)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev,
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+ tdba = tx_ring->dma;
+ tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
-+ ew32(TDBAL(0), (tdba & DMA_32BIT_MASK));
++ ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
+ ew32(TDBAH(0), (tdba >> 32));
+ ew32(TDLEN(0), tdlen);
+ ew32(TDH(0), 0);
+ ew32(TARC(1), tarc);
+ }
+
-+ hw->mac.ops.config_collision_dist(hw);
++ e1000e_config_collision_dist(hw);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+ else
+ rctl |= E1000_RCTL_LPE;
+
-+ /* Enable hardware CRC frame stripping */
-+ rctl |= E1000_RCTL_SECRC;
++ /* Some systems expect that the CRC is included in SMBUS traffic. The
++ * hardware strips the CRC before sending to both SMBUS (BMC) and to
++ * host memory when this is enabled */
++ if (adapter->flags2 & FLAG2_CRC_STRIPPING)
++ rctl |= E1000_RCTL_SECRC;
++
++ /* Workaround Si errata on 82577 PHY */
++ if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
++ u16 phy_data;
++
++ e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
++ phy_data &= 0xfff8;
++ phy_data |= (1 << 2);
++ e1e_wphy(hw, PHY_REG(770, 26), phy_data);
++
++ e1e_rphy(hw, 22, &phy_data);
++ phy_data &= 0x0fff;
++ phy_data |= (1 << 14);
++ e1e_wphy(hw, 0x10, 0x2823);
++ e1e_wphy(hw, 0x11, 0x0003);
++ e1e_wphy(hw, 22, phy_data);
++ }
+
+ /* Setup buffer sizes */
+ rctl &= ~E1000_RCTL_SZ_4096;
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+
+ ctrl_ext = er32(CTRL_EXT);
-+ /* Reset delay timers after every interrupt */
-+ ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
+#ifdef CONFIG_E1000E_NAPI
+ /* Auto-Mask interrupts upon ICR access */
+ ctrl_ext |= E1000_CTRL_EXT_IAME;
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ rdba = rx_ring->dma;
-+ ew32(RDBAL(0), (rdba & DMA_32BIT_MASK));
++ ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
+ ew32(RDBAH(0), (rdba >> 32));
+ ew32(RDLEN(0), rdlen);
+ ew32(RDH(0), 0);
+ * packet size is equal or larger than the specified value (in 8 byte
+ * units), e.g. using jumbo frames when setting to E1000_ERT_2048
+ */
-+ if ((adapter->flags & FLAG_HAS_ERT) &&
-+ (adapter->netdev->mtu > ETH_DATA_LEN)) {
-+ u32 rxdctl = er32(RXDCTL(0));
-+ ew32(RXDCTL(0), rxdctl | 0x3);
-+ ew32(ERT, E1000_ERT_2048 | (1 << 13));
-+ /*
-+ * With jumbo frames and early-receive enabled, excessive
-+ * C4->C2 latencies result in dropped transactions.
-+ */
-+ pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
-+ e1000e_driver_name, 55);
-+ } else {
-+ pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
-+ e1000e_driver_name,
-+ PM_QOS_DEFAULT_VALUE);
++ if (adapter->flags & FLAG_HAS_ERT) {
++ if (adapter->netdev->mtu > ETH_DATA_LEN) {
++ u32 rxdctl = er32(RXDCTL(0));
++ ew32(RXDCTL(0), rxdctl | 0x3);
++ ew32(ERT, E1000_ERT_2048 | (1 << 13));
++ /*
++ * With jumbo frames and early-receive enabled,
++ * excessive C-state transition latencies result in
++ * dropped transactions.
++ */
++ pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
++ adapter->netdev->name, 55);
++ } else {
++ pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
++ adapter->netdev->name,
++ PM_QOS_DEFAULT_VALUE);
++ }
+ }
+
+ /* Enable Receives */
+}
+
+/**
++ * e1000_update_mc_addr_list - Update Multicast addresses
++ * @hw: pointer to the HW structure
++ * @mc_addr_list: array of multicast addresses to program
++ * @mc_addr_count: number of multicast addresses to program
++ *
++ * Updates the Multicast Table Array.
++ * The caller must have a packed mc_addr_list of multicast addresses.
++ **/
++static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
++ u32 mc_addr_count)
++{
++ hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
++}
++
++/**
+ * e1000_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
-+ struct e1000_mac_info *mac = &hw->mac;
+ struct dev_mc_list *mc_ptr;
+ u8 *mta_list;
+ u32 rctl;
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
-+ } else if (netdev->flags & IFF_ALLMULTI) {
-+ rctl |= E1000_RCTL_MPE;
-+ rctl &= ~E1000_RCTL_UPE;
++ rctl &= ~E1000_RCTL_VFE;
+ } else {
-+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
++ if (netdev->flags & IFF_ALLMULTI) {
++ rctl |= E1000_RCTL_MPE;
++ rctl &= ~E1000_RCTL_UPE;
++ } else {
++ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
++ }
++ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
++ rctl |= E1000_RCTL_VFE;
+ }
+
+ ew32(RCTL, rctl);
+ mc_ptr = mc_ptr->next;
+ }
+
-+ hw->mac.ops.update_mc_addr_list(hw, mta_list, i, 1,
-+ mac->rar_entry_count);
++ e1000_update_mc_addr_list(hw, mta_list, i);
+ kfree(mta_list);
+ } else {
+ /*
+ * if we're called from probe, we might not have
+ * anything to do here, so clear out the list
+ */
-+ hw->mac.ops.update_mc_addr_list(hw, NULL, 0, 1,
-+ mac->rar_entry_count);
++ e1000_update_mc_addr_list(hw, NULL, 0);
+ }
+}
+
+}
+
+/**
++ * e1000e_power_up_phy - restore link in case the phy was powered down
++ * @adapter: address of board private structure
++ *
++ * The phy may be powered down to save power and turn off link when the
++ * driver is unloaded and wake on lan is not enabled (among others)
++ * *** this routine MUST be followed by a call to e1000e_reset ***
++ **/
++void e1000e_power_up_phy(struct e1000_adapter *adapter)
++{
++ if (adapter->hw.phy.ops.power_up)
++ adapter->hw.phy.ops.power_up(&adapter->hw);
++
++ adapter->hw.mac.ops.setup_link(&adapter->hw);
++}
++
++/**
++ * e1000_power_down_phy - Power down the PHY
++ *
++ * Power down the PHY so no link is implied when interface is down.
++ * The PHY cannot be powered down if management or WoL is active.
++ */
++static void e1000_power_down_phy(struct e1000_adapter *adapter)
++{
++ /* WoL is enabled */
++ if (adapter->wol)
++ return;
++
++ if (adapter->hw.phy.ops.power_down)
++ adapter->hw.phy.ops.power_down(&adapter->hw);
++}
++
++/**
+ * e1000e_reset - bring the hardware into a known good state
+ *
+ * This function boots the hardware and enables some settings that
+ * set/changed during runtime. After reset the device needs to be
+ * properly configured for Rx, Tx etc.
+ */
-+void e1000_reset(struct e1000_adapter *adapter)
++void e1000e_reset(struct e1000_adapter *adapter)
+{
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct e1000_fc_info *fc = &adapter->hw.fc;
+ /* reset Packet Buffer Allocation to default */
+ ew32(PBA, pba);
+
-+ if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN ) {
++ if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ /*
+ * To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ /*
+ * flow control settings
+ *
-+ * The high water mark must be low enough to fit one full frame
++ * The high water mark must be low enough to fit two full frames
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, and
+ * - the full Rx FIFO size minus the early receive size (for parts
+ * with ERT support assuming ERT set to E1000_ERT_2048), or
-+ * - the full Rx FIFO size minus one full frame
++ * - the full Rx FIFO size minus two full frames
+ */
-+ if (adapter->flags & FLAG_HAS_ERT)
++ if ((adapter->flags & FLAG_HAS_ERT) &&
++ (adapter->netdev->mtu > ETH_DATA_LEN))
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - (E1000_ERT_2048 << 3)));
+ else
+ hwm = min(((pba << 10) * 9 / 10),
-+ ((pba << 10) - adapter->max_frame_size));
++ ((pba << 10) - (2 * adapter->max_frame_size)));
+
-+ fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
-+ fc->low_water = fc->high_water - 8;
++ fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
++ fc->low_water = (fc->high_water - (2 * adapter->max_frame_size));
++ fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */
+
+ if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
+ fc->pause_time = 0xFFFF;
+ else
+ fc->pause_time = E1000_FC_PAUSE_TIME;
+ fc->send_xon = 1;
-+ fc->type = fc->original_type;
++ fc->current_mode = fc->requested_mode;
+
+ /* Allow time for pending master requests to run */
+ mac->ops.reset_hw(hw);
+ e1000_get_hw_control(adapter);
+
+ ew32(WUC, 0);
++ if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)
++ e1e_wphy(&adapter->hw, BM_WUC, 0);
+
+ if (mac->ops.init_hw(hw))
+ e_err("Hardware Error\n");
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ ew32(VET, ETH_P_8021Q);
+
-+ e1000_reset_adaptive_generic(hw);
-+
-+ if (!hw->phy.ops.get_info)
-+ return;
-+
-+ hw->phy.ops.get_info(hw);
++ e1000e_reset_adaptive(hw);
++ e1000_get_phy_info(hw);
+
-+ if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) {
++ if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
++ !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
+ u16 phy_data = 0;
+ /*
+ * speed up time to link by disabling smart power down, ignore
+ * the return value of this function because there is nothing
+ * different we would do if it failed
+ */
-+ hw->phy.ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
++ e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
+ phy_data &= ~IGP02E1000_PM_SPD;
-+ hw->phy.ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
++ e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
+ }
+}
+
-+int e1000_up(struct e1000_adapter *adapter)
++int e1000e_up(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
++ /* DMA latency requirement to workaround early-receive/jumbo issue */
++ if (adapter->flags & FLAG_HAS_ERT)
++ pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY,
++ adapter->netdev->name,
++ PM_QOS_DEFAULT_VALUE);
++
+ /* hardware has been reset, we need to reload some things */
+ e1000_configure(adapter);
+
+ return 0;
+}
+
-+void e1000_down(struct e1000_adapter *adapter)
++void e1000e_down(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
-+ netif_stop_queue(netdev);
++ netif_tx_stop_all_queues(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = er32(TCTL);
+#ifdef CONFIG_E1000E_NAPI
+ napi_disable(&adapter->napi);
+#endif
-+
+ e1000_irq_disable(adapter);
+
+ del_timer_sync(&adapter->watchdog_timer);
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
-+ e1000_reset(adapter);
++#ifdef HAVE_PCI_ERS
++ if (!pci_channel_offline(adapter->pdev))
++#endif
++ e1000e_reset(adapter);
+ e1000_clean_tx_ring(adapter);
+ e1000_clean_rx_ring(adapter);
+
++ if (adapter->flags & FLAG_HAS_ERT)
++ pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY,
++ adapter->netdev->name);
++
+ /*
+ * TODO: for power management, we could drop the link and
+ * pci_disable_device here.
+ */
+}
+
-+void e1000_reinit_locked(struct e1000_adapter *adapter)
++void e1000e_reinit_locked(struct e1000_adapter *adapter)
+{
+ might_sleep();
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+ msleep(1);
-+ e1000_down(adapter);
-+ e1000_up(adapter);
++ e1000e_down(adapter);
++ e1000e_up(adapter);
+ clear_bit(__E1000_RESETTING, &adapter->state);
+}
+
+ return rc;
+
+#ifdef CONFIG_E1000E_MSIX
-+ e1000_set_interrupt_capability(adapter);
++ e1000e_set_interrupt_capability(adapter);
+
+#endif /* CONFIG_E1000E_MSIX */
+ if (e1000_alloc_queues(adapter))
+ return -ENOMEM;
+
-+ spin_lock_init(&adapter->tx_queue_lock);
-+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ e1000_irq_disable(adapter);
+
-+ spin_lock_init(&adapter->stats_lock);
-+
+ set_bit(__E1000_DOWN, &adapter->state);
+ return 0;
+}
+ adapter->flags &= ~FLAG_MSI_TEST_FAILED;
+ wmb();
+ }
-+
++
+ return IRQ_HANDLED;
+}
+
+ /* free the real vector and request a test handler */
+ e1000_free_irq(adapter);
+#ifdef CONFIG_E1000E_MSIX
-+ e1000_reset_interrupt_capability(adapter);
++ e1000e_reset_interrupt_capability(adapter);
+#endif
+
+ /* Assume that the test fails, if it succeeds then the test
+ e_dbg("MSI interrupt test succeeded!\n");
+msi_test_failed:
+#ifdef CONFIG_E1000E_MSIX
-+ e1000_set_interrupt_capability(adapter);
++ e1000e_set_interrupt_capability(adapter);
+#else
+ /* restore the original vector, even if it failed */
+#endif
+ return -EBUSY;
+
+ /* allocate transmit descriptors */
-+ err = e1000_setup_tx_resources(adapter);
++ err = e1000e_setup_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
-+ err = e1000_setup_rx_resources(adapter);
++ err = e1000e_setup_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
-+ e1000_power_up_phy(hw);
++ e1000e_power_up_phy(adapter);
+
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if ((adapter->hw.mng_cookie.status &
+ * interrupt now
+ */
+#ifdef CONFIG_E1000E_MSIX
-+ if (adapter->int_mode != E1000E_INT_MODE_LEGACY)
-+#endif
++ if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
++#else
+ {
++#endif
+ err = e1000_test_msi(adapter);
+ if (err) {
+ e_err("Interrupt allocation failed\n");
+ }
+ }
+
-+ /* From here on the code is the same as e1000_up() */
++ /* From here on the code is the same as e1000e_up() */
+ clear_bit(__E1000_DOWN, &adapter->state);
+
+#ifdef CONFIG_E1000E_NAPI
+
+ e1000_irq_enable(adapter);
+
++ netif_tx_start_all_queues(netdev);
++
+ /* fire a link status change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+
+
+err_req_irq:
+ e1000_release_hw_control(adapter);
-+ if (!adapter->wol && hw->phy.ops.power_down)
-+ hw->phy.ops.power_down(hw);
-+ e1000_free_rx_resources(adapter);
++ e1000_power_down_phy(adapter);
++ e1000e_free_rx_resources(adapter);
+err_setup_rx:
-+ e1000_free_tx_resources(adapter);
++ e1000e_free_tx_resources(adapter);
+err_setup_tx:
-+ e1000_reset(adapter);
++ e1000e_reset(adapter);
+
+ return err;
+}
+static int e1000_close(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
+
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
-+ e1000_down(adapter);
-+ if (!adapter->wol && hw->phy.ops.power_down)
-+ hw->phy.ops.power_down(hw);
++ e1000e_down(adapter);
++ e1000_power_down_phy(adapter);
+ e1000_free_irq(adapter);
+
-+ e1000_free_tx_resources(adapter);
-+ e1000_free_rx_resources(adapter);
++ e1000e_free_tx_resources(adapter);
++ e1000e_free_rx_resources(adapter);
+
+ /*
+ * kill manageability vlan ID if supported, but not if a vlan with
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
+
-+ adapter->hw.mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
++ e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
+
+ if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
+ /* activate the work around */
-+ e1000_set_laa_state_82571(&adapter->hw, 1);
++ e1000e_set_laa_state_82571(&adapter->hw, 1);
+
+ /*
+ * Hold a copy of the LAA in RAR[14] This is done so that
+ * are dropped. Eventually the LAA will be in RAR[0] and
+ * RAR[14]
+ */
-+ adapter->hw.mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr,
-+ adapter->hw.mac.rar_entry_count - 1);
++ e1000e_rar_set(&adapter->hw,
++ adapter->hw.mac.addr,
++ adapter->hw.mac.rar_entry_count - 1);
+ }
+
+ return 0;
+}
+
+/**
++ * e1000e_update_phy_task - work thread to update phy
++ * @work: pointer to our work struct
++ *
++ * this worker thread exists because we must acquire a
++ * semaphore to read the phy, which we could msleep while
++ * waiting for it, and we can't msleep in a timer.
++ **/
++static void e1000e_update_phy_task(struct work_struct *work)
++{
++ struct e1000_adapter *adapter = container_of(work,
++ struct e1000_adapter, update_phy_task);
++ e1000_get_phy_info(&adapter->hw);
++}
++
++/*
+ * Need to wait a few seconds after link up to get diagnostic information from
+ * the phy
-+ **/
++ */
+static void e1000_update_phy_info(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-+ if (adapter->hw.phy.ops.get_info)
-+ adapter->hw.phy.ops.get_info(&adapter->hw);
++ schedule_work(&adapter->update_phy_task);
+}
+
+/**
-+ * e1000_update_stats - Update the board statistics counters
++ * e1000e_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
-+void e1000_update_stats(struct e1000_adapter *adapter)
++void e1000e_update_stats(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+#ifdef HAVE_PCI_ERS
+ struct pci_dev *pdev = adapter->pdev;
+#endif
-+ unsigned long irq_flags;
-+ u16 phy_tmp;
-+
-+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
++ u16 phy_data;
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ return;
+#endif
+
-+ spin_lock_irqsave(&adapter->stats_lock, irq_flags);
-+
-+ /*
-+ * these counters are modified from e1000_adjust_tbi_stats,
-+ * called from the interrupt context, so they must only
-+ * be written while holding adapter->stats_lock
-+ */
-+
+ adapter->stats.crcerrs += er32(CRCERRS);
+ adapter->stats.gprc += er32(GPRC);
+ adapter->stats.gorc += er32(GORCL);
+ adapter->stats.roc += er32(ROC);
+
+ adapter->stats.mpc += er32(MPC);
-+ adapter->stats.scc += er32(SCC);
-+ adapter->stats.ecol += er32(ECOL);
-+ adapter->stats.mcc += er32(MCC);
-+ adapter->stats.latecol += er32(LATECOL);
-+ adapter->stats.dc += er32(DC);
++ if ((hw->phy.type == e1000_phy_82578) ||
++ (hw->phy.type == e1000_phy_82577)) {
++ e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
++ e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
++ adapter->stats.scc += phy_data;
++
++ e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
++ e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
++ adapter->stats.ecol += phy_data;
++
++ e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
++ e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
++ adapter->stats.mcc += phy_data;
++
++ e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
++ e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
++ adapter->stats.latecol += phy_data;
++
++ e1e_rphy(hw, HV_DC_UPPER, &phy_data);
++ e1e_rphy(hw, HV_DC_LOWER, &phy_data);
++ adapter->stats.dc += phy_data;
++ } else {
++ adapter->stats.scc += er32(SCC);
++ adapter->stats.ecol += er32(ECOL);
++ adapter->stats.mcc += er32(MCC);
++ adapter->stats.latecol += er32(LATECOL);
++ adapter->stats.dc += er32(DC);
++ }
+ adapter->stats.xonrxc += er32(XONRXC);
+ adapter->stats.xontxc += er32(XONTXC);
+ adapter->stats.xoffrxc += er32(XOFFRXC);
+
+ hw->mac.tx_packet_delta = er32(TPT);
+ adapter->stats.tpt += hw->mac.tx_packet_delta;
-+ hw->mac.collision_delta = er32(COLC);
++ if ((hw->phy.type == e1000_phy_82578) ||
++ (hw->phy.type == e1000_phy_82577)) {
++ e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
++ e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
++ hw->mac.collision_delta = phy_data;
++ } else {
++ hw->mac.collision_delta = er32(COLC);
++ }
+ adapter->stats.colc += hw->mac.collision_delta;
+
+ adapter->stats.algnerrc += er32(ALGNERRC);
+ adapter->stats.rxerrc += er32(RXERRC);
-+ if (hw->mac.type != e1000_82574)
-+ adapter->stats.tncrs += er32(TNCRS);
++ if ((hw->phy.type == e1000_phy_82578) ||
++ (hw->phy.type == e1000_phy_82577)) {
++ e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
++ e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
++ adapter->stats.tncrs += phy_data;
++ } else {
++ if ((hw->mac.type != e1000_82574) &&
++ (hw->mac.type != e1000_82583))
++ adapter->stats.tncrs += er32(TNCRS);
++ }
+ adapter->stats.cexterr += er32(CEXTERR);
+ adapter->stats.tsctc += er32(TSCTC);
+ adapter->stats.tsctfc += er32(TSCTFC);
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
-+ /* Phy Stats */
-+ if (hw->phy.media_type == e1000_media_type_copper) {
-+ if ((adapter->link_speed == SPEED_1000) &&
-+ (!hw->phy.ops.read_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
-+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
-+ adapter->phy_stats.idle_errors += phy_tmp;
-+ }
-+ }
-+
+ /* Management Stats */
+ adapter->stats.mgptc += er32(MGTPTC);
+ adapter->stats.mgprc += er32(MGTPRC);
+ adapter->stats.mgpdc += er32(MGTPDC);
-+
-+ spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
+}
+
+#ifdef SIOCGMIIPHY
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_phy_regs *phy = &adapter->phy_regs;
+ int ret_val;
-+ unsigned long irq_flags;
-+
-+
-+ spin_lock_irqsave(&adapter->stats_lock, irq_flags);
+
+ if ((er32(STATUS) & E1000_STATUS_LU) &&
+ (adapter->hw.phy.media_type == e1000_media_type_copper)) {
-+ ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy->bmcr);
-+ ret_val |= hw->phy.ops.read_reg(hw, PHY_STATUS, &phy->bmsr);
-+ ret_val |= hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
-+ &phy->advertise);
-+ ret_val |= hw->phy.ops.read_reg(hw, PHY_LP_ABILITY, &phy->lpa);
-+ ret_val |= hw->phy.ops.read_reg(hw, PHY_AUTONEG_EXP,
-+ &phy->expansion);
-+ ret_val |= hw->phy.ops.read_reg(hw, PHY_1000T_CTRL,
-+ &phy->ctrl1000);
-+ ret_val |= hw->phy.ops.read_reg(hw, PHY_1000T_STATUS,
-+ &phy->stat1000);
-+ ret_val |= hw->phy.ops.read_reg(hw, PHY_EXT_STATUS,
-+ &phy->estatus);
++ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
++ ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
++ ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
++ ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
++ ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
++ ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
++ ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
++ ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
+ if (ret_val)
+ e_warn("Error reading PHY register\n");
+ } else {
+ */
+ phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
+ phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
-+ BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
-+ BMSR_ERCAP);
++ BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
++ BMSR_ERCAP);
+ phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
-+ ADVERTISE_ALL | ADVERTISE_CSMA);
++ ADVERTISE_ALL | ADVERTISE_CSMA);
+ phy->lpa = 0;
+ phy->expansion = EXPANSION_ENABLENPAGE;
+ phy->ctrl1000 = ADVERTISE_1000FULL;
+ phy->stat1000 = 0;
+ phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
+ }
-+
-+ spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
+}
+
+#endif /* SIOCGMIIPHY */
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl = er32(CTRL);
+
-+ e_info("Link is Up %d Mbps %s, Flow Control: %s\n",
++ /* Link status message must follow this format for user tools */
++ printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
++ "Flow Control: %s\n",
++ adapter->netdev->name,
+ adapter->link_speed,
+ (adapter->link_duplex == FULL_DUPLEX) ?
-+ "Full Duplex" : "Half Duplex",
++ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
-+ "RX/TX" :
++ "RX/TX" :
+ ((ctrl & E1000_CTRL_RFCE) ? "RX" :
-+ ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
++ ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
+}
+
-+static bool e1000_has_link(struct e1000_adapter *adapter)
++bool e1000_has_link(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = 0;
+ struct e1000_adapter, watchdog_task);
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
++ struct e1000_phy_info *phy = &adapter->hw.phy;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 link, tctl;
+ int tx_pending = 0;
-+ unsigned long timer_val;
+
+ link = e1000_has_link(adapter);
+ if ((netif_carrier_ok(netdev)) && link) {
+ goto link_up;
+ }
+
-+ if ((e1000_enable_tx_pkt_filtering_generic(hw)) &&
++ if ((e1000e_enable_tx_pkt_filtering(hw)) &&
+ (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
+ e1000_update_mng_vlan(adapter);
+
+ &adapter->link_speed,
+ &adapter->link_duplex);
+ e1000_print_link_info(adapter);
-+
+ /*
+ * On supported PHYs, check for duplex mismatch only
+ * if link has autonegotiated at 10/100 half
+ */
+ if ((hw->phy.type == e1000_phy_igp_3 ||
+ hw->phy.type == e1000_phy_bm) &&
-+ (hw->mac.autoneg == TRUE) &&
++ (hw->mac.autoneg == true) &&
+ (adapter->link_speed == SPEED_10 ||
+ adapter->link_speed == SPEED_100) &&
+ (adapter->link_duplex == HALF_DUPLEX)) {
+ u16 autoneg_exp;
+
-+ hw->phy.ops.read_reg(hw, PHY_AUTONEG_EXP,
-+ &autoneg_exp);
++ e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
+
+ if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
+ e_info("Autonegotiated half duplex but"
+ " link partner cannot autoneg. "
+ " Try forcing full duplex if "
-+ "link gets many collisions.");
++ "link gets many collisions.\n");
+ }
+
+ /*
+ tctl |= E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+
++ /*
++ * Perform any post-link-up configuration before
++ * reporting link up.
++ */
++ if (phy->ops.cfg_on_link_up)
++ phy->ops.cfg_on_link_up(hw);
++
+ netif_carrier_on(netdev);
-+ netif_wake_queue(netdev);
++ netif_tx_wake_all_queues(netdev);
++
++ if (!test_bit(__E1000_DOWN, &adapter->state))
++ mod_timer(&adapter->phy_info_timer,
++ round_jiffies(jiffies + 2 * HZ));
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
-+ e_info("Link is Down\n");
++ /* Link status message must follow this format */
++ printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
++ adapter->netdev->name);
+ netif_carrier_off(netdev);
-+ netif_stop_queue(netdev);
++ netif_tx_stop_all_queues(netdev);
++ if (!test_bit(__E1000_DOWN, &adapter->state))
++ mod_timer(&adapter->phy_info_timer,
++ round_jiffies(jiffies + 2 * HZ));
+
+ if (adapter->flags & FLAG_RX_NEEDS_RESTART)
+ schedule_work(&adapter->reset_task);
+ }
+
+link_up:
-+ e1000_update_stats(adapter);
++ e1000e_update_stats(adapter);
+
+ mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+ adapter->tpt_old = adapter->stats.tpt;
+ adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
+ adapter->gotc_old = adapter->stats.gotc;
+
-+ e1000_update_adaptive_generic(&adapter->hw);
++ e1000e_update_adaptive(&adapter->hw);
+
+ if (!netif_carrier_ok(netdev)) {
+ tx_pending = (e1000_desc_unused(tx_ring) + 1 <
+ if (adapter->msix_entries)
+ ew32(ICS, adapter->rx_ring->ims_val);
+ else
-+#endif
+ ew32(ICS, E1000_ICS_RXDMT0);
++#else
++ ew32(ICS, E1000_ICS_RXDMT0);
++#endif
+
+ /* Force detection of hung controller every watchdog period */
+ adapter->detect_tx_hung = 1;
+ * With 82571 controllers, LAA may be overwritten due to controller
+ * reset from the other port. Set the appropriate LAA in RAR[0]
+ */
-+ if (e1000_get_laa_state_82571(hw))
-+ hw->mac.ops.rar_set(hw, adapter->hw.mac.addr, 0);
++ if (e1000e_get_laa_state_82571(hw))
++ e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
+
+ /* Reset the timer */
-+ if (!test_bit(__E1000_DOWN, &adapter->state)) {
-+ timer_val = jiffies + usecs_to_jiffies(adapter->stats_freq_us);
-+ if (adapter->stats_freq_us > 1000000)
-+ timer_val = round_jiffies(timer_val);
-+ mod_timer(&adapter->watchdog_timer, timer_val);
-+ }
++ if (!test_bit(__E1000_DOWN, &adapter->state))
++ mod_timer(&adapter->watchdog_timer,
++ round_jiffies(jiffies + 2 * HZ));
+}
+
+#define E1000_TX_FLAGS_CSUM 0x00000001
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
-+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
-+ iph->daddr, 0,
-+ IPPROTO_TCP,
-+ 0);
++ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
++ 0, IPPROTO_TCP, 0);
+ cmd_length = E1000_TXD_CMD_IP;
+ ipcse = skb_transport_offset(skb) - 1;
+#ifdef NETIF_F_TSO6
+ } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ ipv6_hdr(skb)->payload_len = 0;
-+ tcp_hdr(skb)->check =
-+ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-+ &ipv6_hdr(skb)->daddr,
-+ 0, IPPROTO_TCP, 0);
++ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
++ &ipv6_hdr(skb)->daddr,
++ 0, IPPROTO_TCP, 0);
+ ipcse = 0;
+#endif
+ }
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ default:
-+ if (unlikely(net_ratelimit()))
++ if (unlikely(net_ratelimit()))
+ e_warn("checksum_partial proto=%x!\n", skb->protocol);
+ break;
+ }
+
-+ css = skb_transport_offset(skb);
++ css = skb_transport_offset(skb);
+
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+
+ context_desc->lower_setup.ip_config = 0;
+ context_desc->upper_setup.tcp_fields.tucss = css;
-+ context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
++ context_desc->upper_setup.tcp_fields.tucso =
++ css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucse = 0;
+ context_desc->tcp_seg_setup.data = 0;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_len);
+ unsigned int mss)
+{
+ struct e1000_ring *tx_ring = adapter->tx_ring;
-+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_buffer *buffer_info;
+ unsigned int len = skb->len - skb->data_len;
+ unsigned int offset = 0, size, count = 0, i;
+ skb->data + offset,
+ size,
+ PCI_DMA_TODEVICE);
-+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
-+ dev_err(&pdev->dev, "TX DMA map failed\n");
++ if (pci_dma_mapping_error(adapter->pdev, buffer_info->dma)) {
++ dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
+ adapter->tx_dma_failed++;
+ return -1;
+ }
+ offset,
+ size,
+ PCI_DMA_TODEVICE);
-+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
++ if (pci_dma_mapping_error(adapter->pdev,
++ buffer_info->dma)) {
+ dev_err(&adapter->pdev->dev,
+ "TX DMA page map failed\n");
+ adapter->tx_dma_failed++;
+
+ offset = (u8 *)udp + 8 - skb->data;
+ length = skb->len - offset;
-+ return e1000_mng_write_dhcp_info_generic(hw, (u8 *)udp + 8,
-+ length);
++ return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
+ }
+
+ return 0;
+ return __e1000_maybe_stop_tx(netdev, size);
+}
+
-+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
++#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1)
+static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
+ unsigned int tx_flags = 0;
+ unsigned int len = skb->len - skb->data_len;
-+#ifdef NETIF_F_LLTX
-+ unsigned long irq_flags;
-+#endif
+ unsigned int nr_frags;
+ unsigned int mss = 0;
+ int count = 0;
+ if (adapter->hw.mac.tx_pkt_filtering)
+ e1000_transfer_dhcp_info(adapter, skb);
+
-+#ifdef NETIF_F_LLTX
-+ if (!spin_trylock_irqsave(&adapter->tx_queue_lock, irq_flags))
-+ /* Collision - tell upper layer to requeue */
-+ return NETDEV_TX_LOCKED;
-+#endif
+
+ /*
+ * need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time
+ */
+ if (e1000_maybe_stop_tx(netdev, count + 2)) {
-+#ifdef NETIF_F_LLTX
-+ spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
-+#endif
+ return NETDEV_TX_BUSY;
+ }
+
+ first = tx_ring->next_to_use;
+
+ tso = e1000_tso(adapter, skb);
-+ if (unlikely(tso < 0)) {
++ if (tso < 0) {
+ dev_kfree_skb_any(skb);
-+#ifdef NETIF_F_LLTX
-+ spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
-+#endif
+ return NETDEV_TX_OK;
+ }
+
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+
+ count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
-+ if (unlikely(count < 0)) {
++ if (count < 0) {
+ /* handle pci_map_single() error in e1000_tx_map */
+ dev_kfree_skb_any(skb);
-+#ifdef NETIF_F_LLTX
-+ spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
-+#endif
+ return NETDEV_TX_OK;
+ }
+
+ /* Make sure there is space in the ring for the next send. */
+ e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
+
-+#ifdef NETIF_F_LLTX
-+ spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
-+#endif
+ return NETDEV_TX_OK;
+}
+
+ struct e1000_adapter *adapter;
+ adapter = container_of(work, struct e1000_adapter, reset_task);
+
-+ e1000_reinit_locked(adapter);
++ e1000e_reinit_locked(adapter);
+}
+
+/**
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+
-+ if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-+ e_err("Invalid MTU setting\n");
++ /* Jumbo frame support */
++ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
++ !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
++ e_err("Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+
-+ /* Jumbo frame size limits */
-+ if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
-+ if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-+ e_err("Jumbo Frames not supported.\n");
-+ return -EINVAL;
-+ }
-+ }
-+
-+#define MAX_STD_JUMBO_FRAME_SIZE 9234
-+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-+ e_err("MTU > 9216 not supported.\n");
++ /* Supported frame sizes */
++ if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
++ (max_frame > adapter->max_hw_frame_size)) {
++ e_err("Unsupported MTU setting\n");
+ return -EINVAL;
+ }
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+ msleep(1);
-+ /* e1000_down has a dependency on max_frame_size */
++ /* e1000e_down has a dependency on max_frame_size */
+ adapter->max_frame_size = max_frame;
+ if (netif_running(netdev))
-+ e1000_down(adapter);
++ e1000e_down(adapter);
+
+ /*
+ * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
-+ e1000_up(adapter);
++ e1000e_up(adapter);
+ else
-+ e1000_reset(adapter);
++ e1000e_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->state);
+
+ }
+}
+
++static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
++{
++ struct e1000_hw *hw = &adapter->hw;
++ u32 i, mac_reg;
++ u16 phy_reg;
++ int retval = 0;
++
++ /* copy MAC RARs to PHY RARs */
++ for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
++ mac_reg = er32(RAL(i));
++ e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
++ e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
++ mac_reg = er32(RAH(i));
++ e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
++ e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
++ }
++
++ /* copy MAC MTA to PHY MTA */
++ for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
++ mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
++ e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF));
++ e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF));
++ }
++
++ /* configure PHY Rx Control register */
++ e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg);
++ mac_reg = er32(RCTL);
++ if (mac_reg & E1000_RCTL_UPE)
++ phy_reg |= BM_RCTL_UPE;
++ if (mac_reg & E1000_RCTL_MPE)
++ phy_reg |= BM_RCTL_MPE;
++ phy_reg &= ~(BM_RCTL_MO_MASK);
++ if (mac_reg & E1000_RCTL_MO_3)
++ phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
++ << BM_RCTL_MO_SHIFT);
++ if (mac_reg & E1000_RCTL_BAM)
++ phy_reg |= BM_RCTL_BAM;
++ if (mac_reg & E1000_RCTL_PMCF)
++ phy_reg |= BM_RCTL_PMCF;
++ mac_reg = er32(CTRL);
++ if (mac_reg & E1000_CTRL_RFCE)
++ phy_reg |= BM_RCTL_RFCE;
++ e1e_wphy(&adapter->hw, BM_RCTL, phy_reg);
++
++ /* enable PHY wakeup in MAC register */
++ ew32(WUFC, wufc);
++ ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
++
++ /* configure and enable PHY wakeup in PHY registers */
++ e1e_wphy(&adapter->hw, BM_WUFC, wufc);
++ e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
++
++ /* activate PHY wakeup */
++ retval = hw->phy.ops.acquire(hw);
++ if (retval) {
++ e_err("Could not acquire PHY\n");
++ return retval;
++ }
++ e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
++ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
++ retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
++ if (retval) {
++ e_err("Could not read PHY page 769\n");
++ goto out;
++ }
++ phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
++ retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
++ if (retval)
++ e_err("Could not set PHY Host Wakeup bit\n");
++out:
++ hw->phy.ops.release(hw);
++
++ return retval;
++}
++
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
-+ e1000_down(adapter);
++ e1000e_down(adapter);
+ e1000_free_irq(adapter);
+ }
++#ifdef CONFIG_E1000E_MSIX
++ e1000e_reset_interrupt_capability(adapter);
++#endif
+
-+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
-+#endif
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
-+ ctrl |= E1000_CTRL_ADVD3WUC |
-+ E1000_CTRL_EN_PHY_PWR_MGMT;
++ ctrl |= E1000_CTRL_ADVD3WUC;
++ if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
++ ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
+ ew32(CTRL, ctrl);
+
+ if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
-+ adapter->hw.phy.media_type == e1000_media_type_internal_serdes) {
++ adapter->hw.phy.media_type ==
++ e1000_media_type_internal_serdes) {
+ /* keep the laser running in D3 */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
+ }
+
+ if (adapter->flags & FLAG_IS_ICH)
-+ e1000_disable_gig_wol_ich8lan(&adapter->hw);
++ e1000e_disable_gig_wol_ich8lan(&adapter->hw);
+
+ /* Allow time for pending master requests to run */
-+ e1000_disable_pcie_master_generic(&adapter->hw);
-+
-+ ew32(WUC, E1000_WUC_PME_EN);
-+ ew32(WUFC, wufc);
++ e1000e_disable_pcie_master(&adapter->hw);
++
++ if ((adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) &&
++ !(hw->mac.ops.check_mng_mode(hw))) {
++ /* enable wakeup by the PHY */
++ retval = e1000_init_phy_wakeup(adapter, wufc);
++ if (retval)
++ return retval;
++ } else {
++ /* enable wakeup by the MAC */
++ ew32(WUFC, wufc);
++ ew32(WUC, E1000_WUC_PME_EN);
++ }
+ pci_enable_wake(pdev, PCI_D3hot, 1);
+ pci_enable_wake(pdev, PCI_D3cold, 1);
+ } else {
+ }
+
+ if (adapter->hw.phy.type == e1000_phy_igp_3)
-+ e1000_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
++ e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
+
+ /*
+ * Release control of h/w to f/w. If f/w is AMT enabled, this
+
+ pci_disable_device(pdev);
+
-+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
++ /*
++ * The pci-e switch on some quad port adapters will report a
++ * correctable error when the MAC transitions from D0 to D3. To
++ * prevent this we need to mask off the correctable errors on the
++ * downstream port of the pci-e switch.
++ */
++ if (adapter->flags & FLAG_IS_QUAD_PORT) {
++ struct pci_dev *us_dev = pdev->bus->self;
++ int pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
++ u16 devctl;
++
++ pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
++ pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
++ (devctl & ~PCI_EXP_DEVCTL_CERE));
++
++ pci_set_power_state(pdev, pci_choose_state(pdev, state));
++
++ pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
++ } else {
++ pci_set_power_state(pdev, pci_choose_state(pdev, state));
++ }
+
+ return 0;
+}
+
++static void e1000e_disable_l1aspm(struct pci_dev *pdev)
++{
++ int pos;
++ u16 val;
++
++ /*
++ * 82573 workaround - disable L1 ASPM on mobile chipsets
++ *
++ * L1 ASPM on various mobile (ich7) chipsets do not behave properly
++ * resulting in lost data or garbage information on the pci-e link
++ * level. This could result in (false) bad EEPROM checksum errors,
++ * long ping times (up to 2s) or even a system freeze/hang.
++ *
++ * Unfortunately this feature saves about 1W power consumption when
++ * active.
++ */
++ pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
++ pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val);
++ if (val & 0x2) {
++ dev_warn(&pdev->dev, "Disabling L1 ASPM\n");
++ val &= ~0x2;
++ pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, val);
++ }
++}
++
+#ifdef CONFIG_PM
+static int e1000_resume(struct pci_dev *pdev)
+{
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
-+ err = pci_enable_device(pdev);
++ e1000e_disable_l1aspm(pdev);
++
++ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Cannot enable PCI device from suspend\n");
+ return err;
+ }
+
++ /* AER (Advanced Error Reporting) hooks */
++ err = pci_enable_pcie_error_reporting(pdev);
++ if (err) {
++ dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
++ "0x%x\n", err);
++ /* non-fatal, continue */
++ }
++
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
++#ifdef CONFIG_E1000E_MSIX
++ e1000e_set_interrupt_capability(adapter);
++#endif
+ if (netif_running(netdev)) {
+ err = e1000_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
-+ e1000_power_up_phy(hw);
-+ e1000_reset(adapter);
-+ ew32(WUS, ~0);
++ e1000e_power_up_phy(adapter);
++
++ /* report the system wakeup cause from S3/S4 */
++ if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
++ u16 phy_data;
++
++ e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
++ if (phy_data) {
++ e_info("PHY Wakeup cause - %s\n",
++ phy_data & E1000_WUS_EX ? "Unicast Packet" :
++ phy_data & E1000_WUS_MC ? "Multicast Packet" :
++ phy_data & E1000_WUS_BC ? "Broadcast Packet" :
++ phy_data & E1000_WUS_MAG ? "Magic Packet" :
++ phy_data & E1000_WUS_LNKC ? "Link Status "
++ " Change" : "other");
++ }
++ e1e_wphy(&adapter->hw, BM_WUS, ~0);
++ } else {
++ u32 wus = er32(WUS);
++ if (wus) {
++ e_info("MAC Wakeup cause - %s\n",
++ wus & E1000_WUS_EX ? "Unicast Packet" :
++ wus & E1000_WUS_MC ? "Multicast Packet" :
++ wus & E1000_WUS_BC ? "Broadcast Packet" :
++ wus & E1000_WUS_MAG ? "Magic Packet" :
++ wus & E1000_WUS_LNKC ? "Link Status Change" :
++ "other");
++ }
++ ew32(WUS, ~0);
++ }
++
++ e1000e_reset(adapter);
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev))
-+ e1000_up(adapter);
++ e1000e_up(adapter);
+
+ netif_device_attach(netdev);
+
+
+ return 0;
+}
-+#endif /* CONFIG_PM */
++#endif
+
+#ifndef USE_REBOOT_NOTIFIER
+static void e1000_shutdown(struct pci_dev *pdev)
+ disable_irq(adapter->pdev->irq);
+ e1000_intr(adapter->pdev->irq, netdev);
+
-+ e1000_clean_tx_irq(adapter);
+#ifndef CONFIG_E1000E_NAPI
+ adapter->clean_rx(adapter);
-+#endif
+
++#endif
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
-+ e1000_down(adapter);
++ e1000e_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
++ int err;
++ pci_ers_result_t result;
+
-+ if (pci_enable_device(pdev)) {
++ e1000e_disable_l1aspm(pdev);
++ err = pci_enable_device_mem(pdev);
++ if (err) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
-+ return PCI_ERS_RESULT_DISCONNECT;
-+ }
-+ pci_set_master(pdev);
++ result = PCI_ERS_RESULT_DISCONNECT;
++ } else {
++ pci_set_master(pdev);
++ pci_restore_state(pdev);
+
-+ pci_enable_wake(pdev, PCI_D3hot, 0);
-+ pci_enable_wake(pdev, PCI_D3cold, 0);
++ pci_enable_wake(pdev, PCI_D3hot, 0);
++ pci_enable_wake(pdev, PCI_D3cold, 0);
+
-+ e1000_reset(adapter);
-+ ew32(WUS, ~0);
++ e1000e_reset(adapter);
++ ew32(WUS, ~0);
++ result = PCI_ERS_RESULT_RECOVERED;
++ }
++
++ pci_cleanup_aer_uncorrect_error_status(pdev);
+
-+ return PCI_ERS_RESULT_RECOVERED;
++ return result;
+}
+
+/**
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev)) {
-+ if (e1000_up(adapter)) {
++ if (e1000e_up(adapter)) {
+ dev_err(&pdev->dev,
+ "can't bring device back up after reset\n");
+ return;
+ /* print bus type/speed/width info */
+ e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
+ /* bus width */
-+ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
-+ "Width x1"),
++ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
++ "Width x1"),
+ /* MAC address */
-+ netdev->dev_addr[0], netdev->dev_addr[1],
-+ netdev->dev_addr[2], netdev->dev_addr[3],
-+ netdev->dev_addr[4], netdev->dev_addr[5]);
++ netdev->dev_addr[0], netdev->dev_addr[1],
++ netdev->dev_addr[2], netdev->dev_addr[3],
++ netdev->dev_addr[4], netdev->dev_addr[5]);
+ e_info("Intel(R) PRO/%s Network Connection\n",
+ (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
-+ e1000_read_pba_num_generic(hw, &pba_num);
++ e1000e_read_pba_num(hw, &pba_num);
+ e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
-+ hw->mac.type, hw->phy.type,
-+ (pba_num >> 8), (pba_num & 0xff));
++ hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
++}
++
++static void e1000_eeprom_checks(struct e1000_adapter *adapter)
++{
++ struct e1000_hw *hw = &adapter->hw;
++ int ret_val;
++ u16 buf = 0;
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0))
++ struct pci_dev *pdev = adapter->pdev;
++#endif
++
++ if (hw->mac.type != e1000_82573)
++ return;
++
++ ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
++ if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) {
++ /* Deep Smart Power Down (DSPD) */
++ dev_warn(&adapter->pdev->dev,
++ "Warning: detected DSPD enabled in EEPROM\n");
++ }
++
++ ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
++ if (!ret_val && (le16_to_cpu(buf) & (3 << 2))) {
++ /* ASPM enable */
++ dev_warn(&adapter->pdev->dev,
++ "Warning: detected ASPM enabled in EEPROM\n");
++ }
++}
++
++s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
++{
++ u16 cap_offset;
++
++ cap_offset = pci_find_capability(hw->adapter->pdev, PCI_CAP_ID_EXP);
++ if (!cap_offset)
++ return -E1000_ERR_CONFIG;
++
++ pci_read_config_word(hw->adapter->pdev, cap_offset + reg, value);
++
++ return E1000_SUCCESS;
+}
+
++#ifdef HAVE_NET_DEVICE_OPS
++static const struct net_device_ops e1000e_netdev_ops = {
++ .ndo_open = e1000_open,
++ .ndo_stop = e1000_close,
++ .ndo_start_xmit = e1000_xmit_frame,
++ .ndo_get_stats = e1000_get_stats,
++ .ndo_set_multicast_list = e1000_set_multi,
++ .ndo_set_mac_address = e1000_set_mac,
++ .ndo_change_mtu = e1000_change_mtu,
++ .ndo_do_ioctl = e1000_ioctl,
++ .ndo_tx_timeout = e1000_tx_timeout,
++ .ndo_validate_addr = eth_validate_addr,
++
++ .ndo_vlan_rx_register = e1000_vlan_rx_register,
++ .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
++ .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
++#ifdef CONFIG_NET_POLL_CONTROLLER
++ .ndo_poll_controller = e1000_netpoll,
++#endif
++};
++
++#endif /* HAVE_NET_DEVICE_OPS */
+/**
+ * e1000_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ struct e1000_adapter *adapter;
+ struct e1000_hw *hw;
+ const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
-+
+ static int cards_found;
+ int i, err, pci_using_dac;
+ u16 eeprom_data = 0;
+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
+
-+ err = pci_enable_device(pdev);
++ e1000e_disable_l1aspm(pdev);
++
++ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
-+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
++ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (!err) {
-+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
++ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (!err)
+ pci_using_dac = 1;
+ } else {
-+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
++ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ err = pci_set_consistent_dma_mask(pdev,
-+ DMA_32BIT_MASK);
++ DMA_BIT_MASK(32));
+ if (err) {
+ printk(KERN_ERR "%s: No usable DMA "
-+ "configuration, aborting\n",
-+ pci_name(pdev));
++ "configuration, aborting\n",
++ pci_name(pdev));
+ goto err_dma;
+ }
+ }
+ }
+
-+ err = pci_request_regions(pdev, e1000e_driver_name);
++ err = pci_request_selected_regions_exclusive(pdev,
++ pci_select_bars(pdev, IORESOURCE_MEM),
++ e1000e_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ adapter->pba = ei->pba;
+ adapter->flags = ei->flags;
+ adapter->flags2 = ei->flags2;
-+ adapter->hw.back = adapter;
++ adapter->hw.adapter = adapter;
+ adapter->hw.mac.type = ei->mac;
++ adapter->max_hw_frame_size = ei->max_hw_frame_size;
+ adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
-+ adapter->stats_freq_us = 2 * 1000000; /* default watchdog timer 2sec */
+
+ /* PCI config space info */
-+
-+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
-+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
-+ hw->subsystem_device_id = pdev->subsystem_device;
-+
-+ pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
-+ pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
++#ifdef HAVE_PCI_ERS
++ err = pci_save_state(pdev);
++ if (err)
++ goto err_ioremap;
++#endif
+
+ err = -EIO;
-+ adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0),
-+ pci_resource_len(pdev, 0));
++ adapter->hw.hw_addr = pci_ioremap_bar(pdev, 0);
+ if (!adapter->hw.hw_addr)
+ goto err_ioremap;
+
+ if ((adapter->flags & FLAG_HAS_FLASH) &&
+ (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
-+ adapter->hw.flash_address = ioremap(pci_resource_start(pdev, 1),
-+ pci_resource_len(pdev, 1));
++ adapter->hw.flash_address = pci_ioremap_bar(pdev, 1);
+ if (!adapter->hw.flash_address)
+ goto err_flashmap;
+ }
+
+ adapter->bd_number = cards_found++;
+
-+ e1000_check_options(adapter);
++ e1000e_check_options(adapter);
+
+ /* setup adapter struct */
+ err = e1000_sw_init(adapter);
+ }
+
+ /* construct the net_device struct */
++#ifdef HAVE_NET_DEVICE_OPS
++ netdev->netdev_ops = &e1000e_netdev_ops;
++#else
+ netdev->open = &e1000_open;
+ netdev->stop = &e1000_close;
+ netdev->hard_start_xmit = &e1000_xmit_frame;
+ netdev->set_mac_address = &e1000_set_mac;
+ netdev->change_mtu = &e1000_change_mtu;
+ netdev->do_ioctl = &e1000_ioctl;
-+ e1000_set_ethtool_ops(netdev);
+ netdev->tx_timeout = &e1000_tx_timeout;
-+ netdev->watchdog_timeo = 5 * HZ;
-+#ifdef CONFIG_E1000E_NAPI
-+ netif_napi_add(netdev, &adapter->napi, e1000_poll, 64);
-+#endif
+ netdev->vlan_rx_register = e1000_vlan_rx_register;
+ netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
+ netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = e1000_netpoll;
+#endif
++#endif /* HAVE_NET_DEVICE_OPS */
++ e1000e_set_ethtool_ops(netdev);
++ netdev->watchdog_timeo = 5 * HZ;
++#ifdef CONFIG_E1000E_NAPI
++ netif_napi_add(netdev, &adapter->napi, e1000_poll, 64);
++#endif
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
-+ if ((adapter->flags & FLAG_IS_ICH) &&
-+ (adapter->flags2 & FLAG2_READ_ONLY_NVM))
-+ e1000e_write_protect_nvm_ich8lan(&adapter->hw);
-+
+ hw->mac.ops.get_bus_info(&adapter->hw);
+
+ adapter->hw.phy.autoneg_wait_to_complete = 0;
+ adapter->hw.phy.ms_type = e1000_ms_hw_default;
+ }
+
-+ if (hw->phy.ops.check_reset_block &&
-+ hw->phy.ops.check_reset_block(hw))
++ if (e1000_check_reset_block(&adapter->hw))
+ e_info("PHY reset is blocked due to SOL/IDER session.\n");
+
+ netdev->features = NETIF_F_SG |
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
-+#ifdef NETIF_F_LLTX
-+ /*
-+ * We should not be using LLTX anymore, but we are still Tx faster with
-+ * it.
-+ */
-+ netdev->features |= NETIF_F_LLTX;
-+#endif
+
-+ if (e1000_enable_mng_pass_thru(&adapter->hw))
++ if (e1000e_enable_mng_pass_thru(&adapter->hw))
+ adapter->flags |= FLAG_MNG_PT_ENABLED;
+
+ /*
+ * attempt. Let's give it a few tries
+ */
+ for (i = 0;; i++) {
-+ if (hw->nvm.ops.validate(hw) >= 0)
++ if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
+ break;
+ if (i == 2) {
+ e_err("The NVM Checksum Is Not Valid\n");
+ }
+ }
+
++ e1000_eeprom_checks(adapter);
++
+ /* copy the MAC address out of the NVM */
-+ if (e1000_read_mac_addr(&adapter->hw))
++ if (e1000e_read_mac_addr(&adapter->hw))
+ e_err("NVM Read Error while reading MAC address\n");
+
+ memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
+
+ INIT_WORK(&adapter->reset_task, e1000_reset_task);
+ INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
++ INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
++ INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
+
+ /* Initialize link parameters. User can change them with ethtool */
+ adapter->hw.mac.autoneg = 1;
+ adapter->fc_autoneg = 1;
-+ adapter->hw.fc.original_type = e1000_fc_default;
-+ adapter->hw.fc.type = e1000_fc_default;
++ if (adapter->hw.mac.type == e1000_pchlan) {
++ /* Workaround h/w hang when Tx flow control enabled */
++ adapter->hw.fc.requested_mode = e1000_fc_rx_pause;
++ adapter->hw.fc.current_mode = e1000_fc_rx_pause;
++ } else {
++ adapter->hw.fc.requested_mode = e1000_fc_default;
++ adapter->hw.fc.current_mode = e1000_fc_default;
++ }
+ adapter->hw.phy.autoneg_advertised = 0x2f;
+
+ /* ring size defaults */
+ /* APME bit in EEPROM is mapped to WUC.APME */
+ eeprom_data = er32(WUC);
+ eeprom_apme_mask = E1000_WUC_APME;
++ if (eeprom_data & E1000_WUC_PHY_WAKE)
++ adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
+ } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
+ if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
+ (adapter->hw.bus.func == 1))
-+ hw->nvm.ops.read(&adapter->hw, NVM_INIT_CONTROL3_PORT_B,
-+ 1, &eeprom_data);
++ e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B,
++ 1, &eeprom_data);
+ else
-+ hw->nvm.ops.read(&adapter->hw, NVM_INIT_CONTROL3_PORT_A,
-+ 1, &eeprom_data);
++ e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A,
++ 1, &eeprom_data);
+ }
+
+ /* fetch WoL from EEPROM */
+
+ /* initialize the wol settings based on the eeprom settings */
+ adapter->wol = adapter->eeprom_wol;
++ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
++
++ /* save off EEPROM version number */
++ e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
+
+ /* reset the hardware with the new settings */
-+ e1000_reset(adapter);
++ e1000e_reset(adapter);
+
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
+
+ /* tell the stack to leave us alone until e1000_open() is called */
+ netif_carrier_off(netdev);
-+ netif_stop_queue(netdev);
++ netif_tx_stop_all_queues(netdev);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (!(adapter->flags & FLAG_HAS_AMT))
+ e1000_release_hw_control(adapter);
+err_eeprom:
-+ if (hw->phy.ops.check_reset_block &&
-+ !hw->phy.ops.check_reset_block(hw))
-+ hw->phy.ops.reset(hw);
++ if (!e1000_check_reset_block(&adapter->hw))
++ e1000_phy_hw_reset(&adapter->hw);
+err_hw_init:
-+ hw->mac.ops.remove_device(&adapter->hw);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_sw_init:
++#ifdef CONFIG_E1000E_MSIX
++ e1000e_reset_interrupt_capability(adapter);
++#endif /* CONFIG_E1000E_MSIX */
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+err_flashmap:
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
-+ pci_release_regions(pdev);
++ pci_release_selected_regions(pdev,
++ pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
+
+ /*
+ * flush_scheduled work may reschedule our watchdog task, so
+
+ unregister_netdev(netdev);
+
-+ if (hw->phy.ops.check_reset_block &&
-+ !hw->phy.ops.check_reset_block(hw))
-+ hw->phy.ops.reset(hw);
++ if (!e1000_check_reset_block(&adapter->hw))
++ e1000_phy_hw_reset(&adapter->hw);
+
+#ifdef CONFIG_E1000E_MSIX
-+ e1000_reset_interrupt_capability(adapter);
++ e1000e_reset_interrupt_capability(adapter);
+#endif /* CONFIG_E1000E_MSIX */
-+ hw->mac.ops.remove_device(&adapter->hw);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(adapter->hw.hw_addr);
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
-+ pci_release_regions(pdev);
++ pci_release_selected_regions(pdev,
++ pci_select_bars(pdev, IORESOURCE_MEM));
+
+ free_netdev(netdev);
+
++ /* AER disable */
++ pci_disable_pcie_error_reporting(pdev);
++
+ pci_disable_device(pdev);
+}
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
++ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
++ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
+ board_80003es2lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
+
++ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
++ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
++ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
++ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
++
+ { } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, e1000e_pci_tbl);
+ int ret;
+ printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n",
+ e1000e_driver_name, e1000e_driver_version);
-+ printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n",
++ printk(KERN_INFO "%s: Copyright(c) 1999 - 2009 Intel Corporation.\n",
+ e1000e_driver_name);
+ ret = pci_register_driver(&e1000_driver);
-+ pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name,
-+ PM_QOS_DEFAULT_VALUE);
+#ifdef USE_REBOOT_NOTIFIER
+ if (ret >= 0)
+ register_reboot_notifier(&e1000_notifier_reboot);
+#endif
-+
++
+ return ret;
+}
+module_init(e1000_init_module);
+ unregister_reboot_notifier(&e1000_notifier_reboot);
+#endif
+ pci_unregister_driver(&e1000_driver);
-+ pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name);
+}
+module_exit(e1000_exit_module);
+
+/* netdev.c */
diff -Nurp linux-2.6.22-0/drivers/net/e1000e/param.c linux-2.6.22-10/drivers/net/e1000e/param.c
--- linux-2.6.22-0/drivers/net/e1000e/param.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-10/drivers/net/e1000e/param.c 2008-10-14 01:51:32.000000000 +0200
-@@ -0,0 +1,479 @@
++++ linux-2.6.22-10/drivers/net/e1000e/param.c 2009-06-24 00:32:20.000000000 +0200
+@@ -0,0 +1,466 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
-+ Copyright(c) 1999 - 2008 Intel Corporation.
++ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
-+ * The true default values are loaded in when e1000_check_options is called.
++ * The true default values are loaded in when e1000e_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ MODULE_PARM_DESC(X, desc);
+#endif
+
++
+/*
+ * Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non zero
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
+/*
-+ * Write Protect NVM
++ * Enable CRC Stripping
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
-+E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can "
-+ "lead to corrupted NVM]");
-+
++E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
++ "the CRC");
+
+struct e1000_option {
+ enum { enable_option, range_option, list_option } type;
+}
+
+/**
-+ * e1000_check_options - Range Checking for Command Line Parameters
++ * e1000e_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
-+void __devinit e1000_check_options(struct e1000_adapter *adapter)
++void __devinit e1000e_check_options(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int bd = adapter->bd_number;
+ .max = MAX_RXDELAY } }
+ };
+
-+ /*
-+ * modify min and default if 82573 for slow ping w/a,
-+ * a value greater than 8 needs to be set for RDTR
-+ */
-+ if (adapter->flags & FLAG_HAS_ASPM) {
-+ opt.def = 32;
-+ opt.arg.r.min = 8;
-+ }
-+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
+ * change itr.
+ */
+ if (e1000_validate_option(&adapter->itr, &opt,
-+ adapter) &&
++ adapter) &&
+ (adapter->itr == 3)) {
+ /*
+ * In case of invalid user value,
+ .err = "defaulting to 2 (MSI-X)",
+ .def = E1000E_INT_MODE_MSIX,
+ .arg = { .r = { .min = MIN_INTMODE,
-+ .max = MAX_INTMODE }}
++ .max = MAX_INTMODE } }
+ };
+
+ if (num_IntMode > bd) {
+ adapter->flags |= FLAG_SMART_POWER_DOWN;
+ }
+ }
++ { /* CRC Stripping */
++ const struct e1000_option opt = {
++ .type = enable_option,
++ .name = "CRC Stripping",
++ .err = "defaulting to Enabled",
++ .def = OPTION_ENABLED
++ };
++
++ if (num_CrcStripping > bd) {
++ unsigned int crc_stripping = CrcStripping[bd];
++ e1000_validate_option(&crc_stripping, &opt, adapter);
++ if (crc_stripping == OPTION_ENABLED)
++ adapter->flags2 |= FLAG2_CRC_STRIPPING;
++ } else {
++ adapter->flags2 |= FLAG2_CRC_STRIPPING;
++ }
++ }
+ { /* Kumeran Lock Loss Workaround */
+ const struct e1000_option opt = {
+ .type = enable_option,
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
+ e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+ if (hw->mac.type == e1000_ich8lan)
-+ e1000_set_kmrn_lock_loss_workaround_ich8lan(hw,
++ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
+ kmrn_lock_loss);
+ } else {
+ if (hw->mac.type == e1000_ich8lan)
-+ e1000_set_kmrn_lock_loss_workaround_ich8lan(hw,
++ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
+ opt.def);
+ }
+ }
-+ { /* Write-protect NVM */
-+ const struct e1000_option opt = {
-+ .type = enable_option,
-+ .name = "Write-protect NVM",
-+ .err = "defaulting to Enabled",
-+ .def = OPTION_ENABLED
-+ };
-+
-+ if (adapter->flags & FLAG_IS_ICH) {
-+ if (num_WriteProtectNVM > bd) {
-+ unsigned int write_protect_nvm = WriteProtectNVM[bd];
-+ e1000_validate_option(&write_protect_nvm, &opt,
-+ adapter);
-+ if (write_protect_nvm)
-+ adapter->flags2 |= FLAG2_READ_ONLY_NVM;
-+ } else {
-+ if (opt.def)
-+ adapter->flags2 |= FLAG2_READ_ONLY_NVM;
-+ }
-+ }
-+ }
+}
diff -Nurp linux-2.6.22-0/drivers/net/Kconfig linux-2.6.22-10/drivers/net/Kconfig
--- linux-2.6.22-0/drivers/net/Kconfig 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.22-10/drivers/net/Kconfig 2008-11-10 00:06:46.000000000 +0100
++++ linux-2.6.22-10/drivers/net/Kconfig 2009-08-27 23:57:46.000000000 +0200
@@ -1993,6 +1993,29 @@ config E1000_DISABLE_PACKET_SPLIT
If in doubt, say N.
config MYRI_SBUS
diff -Nurp linux-2.6.22-0/drivers/net/Makefile linux-2.6.22-10/drivers/net/Makefile
--- linux-2.6.22-0/drivers/net/Makefile 2007-07-09 01:32:17.000000000 +0200
-+++ linux-2.6.22-10/drivers/net/Makefile 2008-11-10 00:02:57.000000000 +0100
++++ linux-2.6.22-10/drivers/net/Makefile 2009-08-27 23:57:06.000000000 +0200
@@ -3,6 +3,7 @@
#