fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / Documentation / networking / cs89x0.txt

diff --git a/Documentation/networking/cs89x0.txt b/Documentation/networking/cs89x0.txt
index 188beb7..6387d3d 100644 (file)
--- a/Documentation/networking/cs89x0.txt
+++ b/Documentation/networking/cs89x0.txt
@@ -227,7 +227,7 @@ configuration options are available on the command line:
 * media=rj45           - specify media type
    or media=bnc
    or media=aui
 * media=rj45           - specify media type
    or media=bnc
    or media=aui

-   or medai=auto
+   or media=auto

 * duplex=full          - specify forced half/full/autonegotiate duplex
    or duplex=half
    or duplex=auto
 * duplex=full          - specify forced half/full/autonegotiate duplex
    or duplex=half
    or duplex=auto


@@ -248,7 +248,7 @@ c) The driver's hardware probe routine is designed to avoid
    with device probing.  To avoid this behaviour, add one
    to the `io=' module parameter.  This doesn't actually change
    the I/O address, but it is a flag to tell the driver
    with device probing.  To avoid this behaviour, add one
    to the `io=' module parameter.  This doesn't actually change
    the I/O address, but it is a flag to tell the driver

-   topartially initialise the hardware before trying to
+   to partially initialise the hardware before trying to

    identify the card.  This could be dangerous if you are
    not sure that there is a cs89x0 card at the provided address.
 
    identify the card.  This could be dangerous if you are
    not sure that there is a cs89x0 card at the provided address.
 


@@ -584,7 +584,7 @@ of four ways after installing and or configuring the CS8900/20-based adapter:
 
     1.) The system does not boot properly (or at all).
 
 
     1.) The system does not boot properly (or at all).
 

-    2.) The driver can not communicate with the adapter, reporting an "Adapter
+    2.) The driver cannot communicate with the adapter, reporting an "Adapter

         not found" error message.
 
     3.) You cannot connect to the network or the driver will not load.
         not found" error message.
 
     3.) You cannot connect to the network or the driver will not load.


@@ -620,8 +620,8 @@ I/O Address         Device                        IRQ      Device
                                                 12       Mouse (PS/2)                              
 Memory Address  Device                          13       Math Coprocessor
 --------------  ---------------------           14       Hard Disk controller
                                                 12       Mouse (PS/2)                              
 Memory Address  Device                          13       Math Coprocessor
 --------------  ---------------------           14       Hard Disk controller

-A000-BFFF      EGA Graphics Adpater
-A000-C7FF      VGA Graphics Adpater
+A000-BFFF      EGA Graphics Adapter
+A000-C7FF      VGA Graphics Adapter

 B000-BFFF      Mono Graphics Adapter
 B800-BFFF      Color Graphics Adapter
 E000-FFFF      AT BIOS
 B000-BFFF      Mono Graphics Adapter
 B800-BFFF      Color Graphics Adapter
 E000-FFFF      AT BIOS


@@ -684,7 +684,7 @@ ethernet@crystal.cirrus.com) and request that you be registered for automatic
 software-update notification.
 
 Cirrus Logic maintains a web page at http://www.cirrus.com with the
 software-update notification.
 
 Cirrus Logic maintains a web page at http://www.cirrus.com with the

-the latest drivers and technical publications.
+latest drivers and technical publications.

 
 
 6.4 Current maintainer
 
 
 6.4 Current maintainer