fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / Documentation / scsi / scsi-changer.txt

diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt
index c132687..032399b 100644 (file)
--- a/Documentation/scsi/scsi-changer.txt
+++ b/Documentation/scsi/scsi-changer.txt
@@ -31,7 +31,7 @@ changers. But it allows to handle nearly all possible cases. It knows
   media transport - this one shuffles around the media, i.e. the
                     transport arm.  Also known as "picker".
   storage         - a slot which can hold a media.
   media transport - this one shuffles around the media, i.e. the
                     transport arm.  Also known as "picker".
   storage         - a slot which can hold a media.

-  import/export   - the same as above, but is accessable from outside,
+  import/export   - the same as above, but is accessible from outside,

                     i.e. there the operator (you !) can use this to
                     fill in and remove media from the changer.
                    Sometimes named "mailslot".
                     i.e. there the operator (you !) can use this to
                     fill in and remove media from the changer.
                    Sometimes named "mailslot".


@@ -88,7 +88,7 @@ If the module finds the changer, it prints some messages about the
 device [ try "dmesg" if you don't see anything ] and should show up in
 /proc/devices. If not....  some changers use ID ? / LUN 0 for the
 device and ID ? / LUN 1 for the robot mechanism. But Linux does *not*
 device [ try "dmesg" if you don't see anything ] and should show up in
 /proc/devices. If not....  some changers use ID ? / LUN 0 for the
 device and ID ? / LUN 1 for the robot mechanism. But Linux does *not*

-look for LUN's other than 0 as default, becauce there are to many
+look for LUNs other than 0 as default, because there are too many

 broken devices. So you can try:
 
   1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi
 broken devices. So you can try:
 
   1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi


@@ -107,7 +107,7 @@ because the kernel will translate the error codes into human-readable
 strings then.
 
 You can display these messages with the dmesg command (or check the
 strings then.
 
 You can display these messages with the dmesg command (or check the

-logfiles).  If you email me some question becauce of a problem with the
+logfiles).  If you email me some question because of a problem with the

 driver, please include these messages.
 
 
 driver, please include these messages.